Carbon slow-release and enhanced nitrogen removal performance of plant residue-based composite filler and ecological mechanisms in constructed wetland application

Stable carbon release and coupled microbial efficacy of external carbon source solid fillers are the keys to enhanced nitrogen removal in constructed wetlands. The constructed wetland plant residue Acorus calamus was cross-linked with poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) to create composite solid carbon source fillers (Ac-BDPs). The study demonstrated the slow release of carbon sources from Ac-BDPs with 35.27 mg/g under an average release rate of 0.88 mg/(g·d). Excellent denitrification was also observed in constructed wetlands with Ac-BDPs. Moreover, the average removal rate of nitrate nitrogen (NO3--N) was increased by 1.94 and 3.85 times of the blank groups under initial NO3--N inputs of 5 and 15 mg/L, respectively. Furthermore, the relatively high abundances of nap, narG, nirKS, norB, qnorZ and nosZ guaranteed efficient denitrification performance in constructed wetlands with Ac-BDPs. The study introduced a reliable technique for biological nitrogen removal by using composite carbon source fillers in constructed wetlands.

Facile crosslinking methods for water-durable oven-dried cellulose nanofibril foams and their application as dye adsorbents

The potential applications of cellulose nanofibril-based foam materials can be expanded by their enhanced water durability. This study proposes two crosslinking methods to improve the water durability of the oven-dried carboxymethylated cellulose nanofibril (CMCNF) foam. The first method involves the addition of a crosslinker, polyamideamine epichlorohydrin. The second method is the self-crosslinking of CMCNFs via heat treatment at 140 °C for less than an hour, which is a simple way to crosslink CMCNF-based materials. Both crosslinking methods resulted in excellent water durability and wet resilience of the foams, which also exhibited high water absorbency. Furthermore, neither method affected the structural nor mechanical properties of the oven-dried CMCNF foams. In particular, self-crosslinking by heat treatment proved to be as effective as using a crosslinking agent. Compared to the freeze-dried foam, the oven-dried foam exhibited slower methylene blue (MB) dye adsorption but a higher maximum adsorption capacity (238-250 mg/g), attributed to the closed pore structure and a larger specific surface area. In addition, the isotherm and reusability of the foam for MB adsorption were investigated. These crosslinking processes expanded the potential use of oven-dried CMCNF foams as adsorbents for cationic dyes.

Bacterial cellulose nanocrystal as drug delivery system for overcoming the biological barrier of cyano-phycocyanin: a biomedical application of microbial product

Phycocyanin, produced by Spirulina platensis, has been reported as an anti-inflammatory, anti-hyperalgesia, antioxidant, anti-tumor, and anti-cancer agent. However, the ingestion of phycocyanin in the body is often hindered by its instability against gastric pH conditions. The nano-drug delivery system has developed as a promising platform for efficient drug delivery and improvement as well as drug efficacy. Bacterial cellulose nanocrystal (BCNC) has it superiority as DDS due to its inherent properties such as nanoscale dimension, large surface area, - biocompatibility, and non-toxic. To improve its mechanical properties, BCNC was crosslinked with glutaraldehyde and was analyzed as a potential candidate for DDS. The Fourier transform infrared analysis of the BCNC suggested that hydrolysis did not alter the chemical composition. The index of crystallinity of the BCNC was 18.31% higher than that of the original BC, suggesting that crystalline BC has been successfully isolated. The BCNC particle also showed a needle-like morphology which is 25 ± 10 nm in diameter and a mean length of 626 ± 172 nm. Crosslinked BCNC also had larger pores than the original BCNC along with higher thermal stability. Optimum phycocyanin adsorption on crosslinked BCNC reached 65.3% in 3 h. The release study shows that the crosslinked BCNC can protect the phycocyanin retardation by gastric fluid until phycocyanin reaches the targeted sites. This study provides an alternative potential DDS derived from natural bioresources with less expenses and better properties to promote the application of BCNC as functional nanomaterials in biomedical science.

Adsorption of methylene blue from textile industrial wastewater using activated carbon developed from Rumex abyssinicus plant

Methylene blue (MB) is abundantly found in textile industrial effluent which can cause severe health problems for public and environmental ecology. Therefore, this study aimed to remove MB from textile wastewater using the activated carbon developed from Rumex abyssinicus. The adsorbent was activated using chemical and thermal methods, and then it was characterized by SEM, FTIR, BET, XRD, and pH zero-point charge (pHpzc). The adsorption isotherm and kinetics were also investigated. The experimental design was composed of four factors at three levels (pH (3, 6, and 9), initial MB concentration (100, 150, and 200 mg/L), adsorbent dosage (20, 40, and 60 mg/100 mL), and contact time (20, 40, and 60 min)). The adsorption interaction was evaluated using response surface methodology. The characterization of a Rumex abyssinicus activated carbon was found to have multiple functional groups (FTIR), an amorphous structure (XRD), crack with ups and down morphology (SEM), pHpzc of 5.03 and a high BET-specific surface area of 2522 m²/g. The optimization of MB dye removal was carried out using the Response Surface methodology coupled with the Box Behnken approach. The maximum removal efficiency of 99.9% was recorded at optimum conditions of pH 9, MB concentration of 100 mg/L, the adsorbent dosage of 60 mg/100 mL, and contact time of 60 min. Among the three adsorption isotherm models, the Freundlich isotherm model was the best fit with an experimental value at R² 0.99 showing the adsorption process was heterogeneous and multilayer whereas the kinetics study revealed that pseudo-second-order at R² 0.88. Finally, this adsorption process is quite promising to be used at an industrial level.

Synthesis of bioinspired sorbent and their exploitation for methylene blue remediation

In this research article, novel starch phosphate grafted polyvinyl imidazole (StP-g-PIMDZs) was synthesized. Firstly, a phosphate group was attached to starch polymer via a phosphorylation reaction. Next, 1-vinyl imidazole (VIMDZ) was grafted on the backbone of starch phosphate (StP) through a free radical polymerization reaction. The synthesis of these modified starches was confirmed by 1H NMR, 31P NMR and FT-IR techniques. The grafting of vinyl imidazole onto StP diminished the crystallinity. Due to the insertion of the aromatic imidazole ring, the StP-g-PIMDZs demonstrated greater thermal stability. The StP and StP-g-PIMDZs were used as sorbents for the adsorption of methylene blue dye (MBD) from the model solution. The maximum removal percentage for starch, StP, StP-g-PIMDZ 1, StP-g-PIMDZ 2 and StP-g-PIMDZ 3 was found to be 60.6%, 66.7%, 74.2%, 85.3 and 95.4%, respectively. The Pseudo second order kinetic model and Langmuir adsorption isotherm were best suited to the experimental data with R2 = 0.999 and 0.99, respectively. Additionally, the thermodynamic parameters showed that the adsorption process was feasible, spontaneous, endothermic and favored chemi-sorption mechanism.

Preparation of nanocellulose grafted molecularly imprinted polymer for selective adsorption Pb(II) and Hg(II)

Heavy metal pollution has become a major problem in environmental pollution. Ion imprinted polymers with specific identification and wide practicality have gradually become an important tool for wastewater treatment. In this work, ion-imprinted polymer-grafted modified nanocellulose was designed as an adsorbent for the serious hazard of Pb(II) and Hg(II) in wastewater. This work used medical cotton wool as raw material to prepare a nanocellulose suspension by acid-catalyzed hydrolysis. The high reactivity of carbonyl diimidazole (CDI) was utilized to react with acrylic acid (AA) to generate reactive intermediates, which then reacted with nanocellulose to form activated nanocellulose (AA-CDI-NC). Crown ether was used as functional monomers to synthesize Pb(II) ion-imprinted polymers and grafted onto the AA-CDI-NC surface (Pb(II)-MIP-NC). Meanwhile, Hg(II) ion-imprinted polymer was synthesized and grafted onto the AA-CDI-NC surface (Hg(II)-MIP-NC) using thymine as a functional monomer. The experimental results showed that Pb(II)-MIP-NC and Hg(II)-MIP-NC could effectively adsorb Pb(II) and Hg(II), respectively. Their adsorption behaviors for Pb(II) and Hg(II) were consistent with the secondary kinetic model and Langmuir adsorption isotherm model. The adsorption capacities of Pb (II)-MIP-NC and Hg (II)-MIP-NC for Pb (II) and Hg (II) were 27.55 mg/g and 161.31, respectively.

Removal of Dye from Wastewater Using a Novel Composite Film Incorporating Nanocellulose

Research shows that the composite material is used as an adsorbent to remove pollutants from wastewater. This work is aimed at producing a novel composite film comprising chitosan, polyvinyl alcohol, and cornstarch incorporating nanocellulose (CPCN). The composite film was prepared by a blending method wherein nanocellulose was extracted using a chemical method from banana bract. The prepared CPCN was characterized using Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) with EDX to understand their molecular interaction and surface morphology, respectively. The effect of parameters including pH, adsorbent dosage, initial dye concentration, and contact time on the adsorption of methylene blue (MB) dye was studied. The maximum adsorption was found to be up to 63.13 mg/g MB with a pH of 10, adsorbent dosage of 2 g, an initial concentration of 150 ppm, and contact time of 120 min at room temperature (25°C) indicating a moderate adsorption capacity of the CPCN. Comparing the Langmuir and Freundlich adsorption isotherm models, the former fitted well with MB dye adsorption data, implying that the models can be applied to uptake MB dye by CPCN. In the kinetic adsorption experiment, the adsorbed dye almost reached equilibrium at about 120 min for the CPCN and followed the pseudo-second-order kinetic model. Therefore, the CPCN can be used as a potential adsorbent in wastewater treatment.

Recent advances in the removal of dyes from wastewater using low-cost adsorbents

The presence of hazardous dyes in wastewater cause disastrous effects on living organisms and the environment. The conventional technologies for the remediation of dyes from water have several bottlenecks such as high cost and complex operation. This review aims to present a comprehensive outlook of various bio-sorbents that are identified and successfully employed for the removal of dyes from aqueous environments. The effect of physicochemical characteristics of adsorbents such as surface functional groups, pore size distribution and surface areas are critically evaluated. The adsorption potential at different experimental conditions of diverse bio-sorbents has been also explored and the influence of certain key parameters like solution pH, temperature, concentration of dyes, dosage of bio-sorbent and agitation speed is carefully evaluated. The mechanism of dyes adsorption, regeneration potential of the employed bio-sorbents and their comparison with other commercial adsorbents are discussed. The cost comparison of different adsorbents and key technological challenges are highlighted followed by the recommendations for future research.

Adsorption behavior of rhamnolipid modified magnetic Co/Al layered double hydroxide for the removal of cationic and anionic dyes

In the present research, magnetic rhamnolipid-Co/Al layered double hydroxide (MR-LDH) was synthesized to uptake methylene blue (MB) and reactive orange 16 (RO16) from aqueous solution. The main parameters, including pH, adsorbent dosage, contact time, and initial analyte concentration, were optimized to achieve the best adsorption efficiency. Accordingly, the elimination of MB on MR-LDH is improved in the basic medium due to the electrostatic interactions between the negative charge of MR-LDH and the positive charge of MB dye. In contrast, the acidic medium (pH = 3) was favored for RO16 adsorption because of hydrogen bonding between the protonated form of azo dye and protonated hydroxyl groups at the surface of MR-LDH. The calculated maximum adsorption capacities for MB and RO16 were 54.01 and 53.04 mg/g at 313 K, respectively. The Langmuir model, which assumes monolayer adsorption on the adsorbent surface, provides the best explanation for the adsorption of both dyes (R² = 0.9991 for MB and R² = 0.9969 for RO16). Moreover, the pseudo-second-order kinetic model best described the adsorption process for MB (R² = 0.9970) and RO16 (R² = 0.9941). The proposed adsorbent maintains stable adsorption performance for four consecutive cycles. After each adsorption process, MR-LDH is easily separated by an external magnet. The findings show that MR-LDH was found to be an excellent adsorbent for the removal of both cationic and anionic organic dyes from aqueous solutions.

A Review on Nanocellulose and Superhydrophobic Features for Advanced Water Treatment

Globally, developing countries require access to safe drinking water to support human health and facilitate long-term sustainable development, in which waste management and control are critical tasks. As the most plentiful, renewable biopolymer on earth, cellulose has significant utility in the delivery of potable water for human consumption. Herein, recent developments in the application of nanoscale cellulose and cellulose derivatives for water treatment are reviewed, with reference to the properties and structure of the material. The potential application of nanocellulose as a primary component for water treatment is linked to its high aspect ratio, high surface area, and the high number of hydroxyl groups available for molecular interaction with heavy metals, dyes, oil-water separation, and other chemical impurities. The ability of superhydrophobic nanocellulose-based textiles as functional fabrics is particularly acknowledged as designed structures for advanced water treatment systems. This review covers the adsorption of heavy metals and chemical impurities like dyes, oil-water separation, as well as nanocellulose and nanostructured derivative membranes, and superhydrophobic coatings, suitable for adsorbing chemical and biological pollutants, including microorganisms.

Honeycomb-like V2O5 Based Films: Synthesis, Structural, Thermal, and Optical Properties for Environmental Applications

In the present study, new composite films consisting of hierarchical nanobelt V2O5 and polymer mixture were prepared via a simple casting method. The incorporation of 30 wt.% of V2O5 into the polymer matrix yielded a honeycomb like structure with abundant micro-voids (5.5 μm), higher roughness average by 45.8%, and a higher root mean square roughness by 52%, which are beneficial for the enhancement of active surface area for dye adsorption. Furthermore, optical property studies have shown that the incorporation of V2O5 has made the nanocomposite film a suitable UV–visible light-sensitive material, and thus the application of films can be expanded towards photocatalytic degradation of various toxic pollutants such as nitrophenol, Cr(VI), antibiotects, and so on. Finally, the composite film exhibited enhanced thermostability in comparison to unmodified film, as confirmed by TGA and DSC analysis. The optimal film showed 96.3% removal efficiency and 27.02 mg/g adsorption capacity. The dye sorption performance of V2O5 based films is studied at various times, dosages, and initial dye concentrations. The experimental data more closely fit the Langmuir isotherm model (R2 = 0.997) than the Freundlich, Temkin, and Dubinin–Radushkevich isotherm models, demonstrating a monolayer adsorption mechanism. The MB adsorption process on V2O5 film was controlled by the chemical adsorption step, which was evidenced by the good-fitting of kinetic adsorption results to the pseudo second order model (R2 = 0.991). The obtained results indicated that the V2O5 based films in this work are hopeful candidates for environmental applications.

Structure, physicochemical properties, and adsorption performance of the ethyl cellulose/bentonite composite films

Ethyl cellulose (EC) was filled with bentonite (Bent) particles by mechanical dispersion to produce composite film materials that were studied using various methods. According to X-ray diffraction (XRD) analysis, the inter-chain separation length was larger in EC/Bent composite then those in pure polymer. Infrared spectrometry indicated a formation of hydrogen bonds between the hydroxyl groups of EC and the silanol groups of clay. Tests showed an increase in tensile strength of the polymer material (by 35-40%) when doped with bentonite. It was found that modification of polymer with bentonite resulted in increasing of the adsorption efficiency of methylene blue (MB): the equilibrium concentration of MB ions in adsorbent phase increased 2.5 times. The MB adsorption kinetics obeyed the pseudo-first-order mechanism. Isotherms were in good agreement with Langmuir model. For the composite, the maximum monolayer adsorption capacity was 4 times higher than that for pure polymer.