Optimized Ribociclib nanostructured lipid carrier for the amelioration of skin cancer: Inferences from ex-vivo skin permeation and dermatokinetic studies

Current research focuses on explicitly developing and evaluating nanostructured lipidic carriers (NLCs) for the chemotherapeutic drug Ribociclib (RCB) via the topical route to surmount the inherent bioavailability shortcomings. The absolute oral bioavailability has not been determined, but using a physiologically based pharmacokinetic model it was predicted that 65.8 % of the standard dose of RCB (600 mg) would be absorbed mainly in the small intestine. RCB-NLCs were produced using the solvent evaporation method, and Box-Behnken Design (BBD) was employed to optimize composition. The prepared NLCs had an average PS of 79.29 ± 3.53 nm, PDI of 0.242 ± 0.021, and a %EE of 86.07 ± 3.14. The TEM analysis disclosed the spherical form and non-aggregative nature of the NLCs. The outcomes of an in-vitro release investigation presented cumulative drug release of 84.97 ± 3.37 % in 24 h, significantly higher than that from the RCB suspension (RCB-SUS). Ex-vivo skin permeation investigations on rodent (Swiss albino mice) revealed that RCB-NLCs have 1.91 times increases in skin permeability comparable to RCB-SUS. Compared to RCB-SUS, RCB-NLCs were able to penetrate deeper into the epidermis membrane than RCB-SUS as per the findings of confocal microscopy. In dermatokinetic study, higher amount of RCB was maintained in both the layers of mice's skin when treated with RCB-NLCs gel comparable to the RCB-SUS gel preparation. The in-vitro, ex-vivo, CLSM, and dermatokinetics data demonstrated a significant possibility for this novel RCB formulation to be effective against skin cancer.

Novel indolyl 1,2,4-triazole derivatives as potential anti-proliferative agents: in silico studies, synthesis, and biological evaluation

A new series of indolyl 1,2,4-triazole scaffolds was designed, synthesised, and biologically evaluated for their inhibitory activity against both CDK4 and CDK6. The results ranged from 0.049 μM to 3.031 μM on CDK4 and from 0.075 μM to 1.11 μM on CDK6 when compared to staurosporine, with IC50 values of 1.027 and 0.402 μM, respectively. Moreover, all compounds were tested for their cytotoxicity against two breast cancer cell lines, MCF-7 and MDA-MB-231. All of the synthesised compounds showed promising anti-proliferative activity, with two compounds Vf (IC50 = 2.91 and 1.914 μM, respectively) and Vg (IC50 = 0.891 and 3.479 μM, respectively) having potent cytotoxic activity in comparison to the reference staurosporine (IC50 = 3.144 and 4.385 μM, respectively). Vf and Vg were also found to significantly induce apoptosis to 45.33% and 37.26% (control = 1.91%) where Vf arrested the cell cycle at the S phase while Vg arrested the cycle at the G0/G1 phase. The binding mode and interactions of all compounds were studied and found to mimic those of the FDA approved CDK4/6 inhibitor palbociclib that was used as a reference throughout the study.

A review of FDA approved drugs and their formulations for the treatment of breast cancer

Breast cancer is one of the most diagnosed solid cancers globally. Extensive research has been going on for decades to meet the challenges of treating solid tumors with selective compounds. This article aims to summarize the therapeutic agents which are either being used or are currently under approval for use in the treatment or mitigation of breast cancer by the US FDA, to date. A structured search of bibliographic databases for previously published peer-reviewed research papers on registered molecules was explored and data was sorted in terms of various categories of drugs used in first line/adjuvant therapy for different stages of breast cancer. We included more than 300 peer-reviewed papers, including both research and reviews articles, in order to provide readers an useful comprehensive information. A list of 39 drugs are discussed along with their current status, dose protocols, mechanism of action, pharmacokinetics, possible side effects, and marketed formulations. Another interesting aspect of the article included focusing on novel formulations of these drugs which are currently in clinical trials or in the process of approval. This exhaustive review thus shall be a one-stop solution for researchers who are working in the areas of formulation development for these drugs.

Ribociclib Hybrid Lipid-Polymer Nanoparticle Preparation and Characterization for Cancer Treatment

Ribociclib is a newly approved orally administered drug for breast cancer. This study aimed to prepare, characterize, and evaluate hybrid lipid-polymer nanoparticles (PLNs) of ribociclib to enhance its in vitro dissolution rate, pharmacokinetics, and anticancer efficacy. Ribociclib-loaded PLNs were prepared by solvent evaporation using the Box-Behnken design to optimize formulation variables. Particle size, entrapment efficiency, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), in vitro release cytotoxicity, molecular modeling, and pharmacokinetic studies were examined. The ribociclib-loaded PLN (formula 1, F1) was optimized in terms of particle size (266.9 ± 4.61 nm) and encapsulation efficiency (59.1 ± 2.57 mg/mL). DSC and thermogravimetric characterization showed the absence of a crystalline structure in the prepared PLNs, confirmed by FTIR, and showed no interactions between the components and the drug. AFM showed well-dispersed heterogeneously shaped nanoparticles. The in vitro release profile exhibited significant results for the optimized formula, reaching 100% at 600 and 90 min at pH 6.8 and 1.2, respectively. The low IC₅₀ obtained by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay suggests that optimized PLN might serve as an effective delivery vehicle for cancer treatment, especially breast and lung cancer. Molecular modeling revealed several hydrogen bonds. A pharmacokinetic study in rats showed that the ribociclib formula had a 6.5-fold increase in maximum concentration (C_max) and a 5.6-fold increase in area under the curve (AUC). Regarding the everted intestinal sac absorption, formula 1 increased ribociclib penetration relative to the physical combination and pure medication. In conclusion, optimized PLNs with enhanced physicochemical and cytotoxic properties and improved pharmacokinetic parameters were successfully prepared.

Nanosponges for Drug Delivery and Cancer Therapy: Recent Advances

Nanosponges with three-dimensional (3D) porous structures, narrow size distribution, and high entrapment efficiency are widely engineered for cancer therapy and drug delivery purposes. They protect the molecular agents from degradation and help to improve the solubility of lipophilic therapeutic agents/drugs with targeted delivery options in addition to being magnetized to attain suitable magnetic features. Nanosponge-based delivery systems have been applied for cancer therapy with high specificity, biocompatibility, degradability, and prolonged release behavior. In this context, the drug loading within nanosponges is influenced by the crystallization degree. Notably, 3D printing technologies can be applied for the development of novel nanosponge-based systems for biomedical applications. The impacts of polymers, cross-linkers, type of drugs, temperature, loading and mechanism of drug release, fabrication methods, and substitution degree ought to be analytically evaluated. Eco-friendly techniques for the manufacturing of nanosponges still need to be uncovered in addition to the existing methods, such as solvent techniques, ultrasound-assisted preparation, melting strategies, and emulsion solvent diffusion methods. Herein, the recent advancements associated with the drug delivery and cancer therapy potential of nanosponges (chiefly, cyclodextrin-based, DNAzyme, and ethylcellulose nanosponges) are deliberated, focusing on the important challenges and future perspectives.

Redox responsive polymeric micelles of gellan gum/abietic acid for targeted delivery of ribociclib

In most breast tumors level of glutathione reductase is much higher than in healthy tissues. In the current study, a redox-glutathione sensitive micelle based on Abietic acid-Cystamine-Gellan gum (AB-ss-GG) was designed for targeted delivery of Ribociclib (RIB) to breast cancer cells. AB is a monocarboxylic acid and a diterpenoid abietane with anti-tumor effects. Successful synthesis of the conjugate was confirmed by FT-IR and ¹HNMR spectroscopy. Critical micelle concentration (CMC) was measured by pyrene as a fluorescent probe. Micelles of AB-GG and AB-ss-GG were loaded with different RIB/polymer ratios, and their redox-sensitivity was measured in the presence and absence of dithiothreitol (DTT) by determining the particle size and RIB release efficiency. Cell cytotoxicity and cellular uptake were assessed by MTT assay and flow-cytometry method on MCF-7 cells. CMC of AB-ss-GG and AB-GG micelles were estimated to be 40.15 and 37.33 mg/mL, respectively. In the presence of DTT, the particle size and release efficiency of AB-ss-GG micelles increased specially at a 1:1 drug/polymer ratio. AB-ss-GG micelles containing RIB showed higher cytotoxicity (IC₅₀ = 47.86 μmol/L) and cellular uptake than AB-GG micelles (IC₅₀ = 190.25 μmol/L) and free RIB (IC₅₀ = 75.26 μmol/L) at 48 h. AB-ss-GG micelles showed a promising redox-sensitive polymeric carrier for RIB delivery.