Automatic COVID-19 Lung Infection Segmentation through Modified Unet Model

Multi-Task Foreground-Aware Network with Depth Completion for Enhanced RGB-D Fusion Object Detection Based on Transformer

Fusing multiple sensor perceptions, specifically LiDAR and camera, is a prevalent method for target recognition in autonomous driving systems. Traditional object detection algorithms are limited by the sparse nature of LiDAR point clouds, resulting in poor fusion performance, especially for detecting small and distant targets. In this paper, a multi-task parallel neural network based on the Transformer is constructed to simultaneously perform depth completion and object detection. The loss functions are redesigned to reduce environmental noise in depth completion, and a new fusion module is designed to enhance the network's perception of the foreground and background. The network leverages the correlation between RGB pixels for depth completion, completing the LiDAR point cloud and addressing the mismatch between sparse LiDAR features and dense pixel features. Subsequently, we extract depth map features and effectively fuse them with RGB features, fully utilizing the depth feature differences between foreground and background to enhance object detection performance, especially for challenging targets. Compared to the baseline network, improvements of 4.78%, 8.93%, and 15.54% are achieved in the difficult indicators for cars, pedestrians, and cyclists, respectively. Experimental results also demonstrate that the network achieves a speed of 38 fps, validating the efficiency and feasibility of the proposed method.

An analysis of retracted COVID-19 articles published by one medical publisher with multiple journals

Background

The retraction of medical articles periodically occurs in most medical journals and can involve multiple article types. These retractions are beneficial if they remove flawed or fraudulent information from the medical literature. However, retractions may also decrease confidence in the medical literature and require significant amounts of time by editors.

Methods

One publisher (Hindawi) announced that it will retract over 1200 articles. Given this, the PubMed database was searched to identify retracted publications on or related to COVID-19, and articles retracted by journals sponsored by the publisher Hindawi were then identified.

Results

These journals retracted 25 articles and, in most cases, did not provide an exact explanation about the particular problem(s) resulting in the retraction. The time to retraction was 468.7 ± 109.8 days (median =  446 days). These articles had 9.3 ± 9.9 citations.

Conclusion

Analysis of the titles and abstracts of the articles suggests that their removal from the medical literature would have limited effects on the near-term management decisions during the COVID-19 pandemic. Nevertheless, retraction of medical articles creates uncertainty in medical care and science and in the public regarding the validity of medical research and related publications and the level of professionalism of the individuals submitting these articles.

Enhancing COVID-19 CT Image Segmentation: A Comparative Study of Attention and Recurrence in UNet Models

Imaging plays a key role in the clinical management of Coronavirus disease 2019 (COVID-19) as the imaging findings reflect the pathological process in the lungs. The visual analysis of High-Resolution Computed Tomography of the chest allows for the differentiation of parenchymal abnormalities of COVID-19, which are crucial to be detected and quantified in order to obtain an accurate disease stratification and prognosis. However, visual assessment and quantification represent a time-consuming task for radiologists. In this regard, tools for semi-automatic segmentation, such as those based on Convolutional Neural Networks, can facilitate the detection of pathological lesions by delineating their contour. In this work, we compared four state-of-the-art Convolutional Neural Networks based on the encoder-decoder paradigm for the binary segmentation of COVID-19 infections after training and testing them on 90 HRCT volumetric scans of patients diagnosed with COVID-19 collected from the database of the Pisa University Hospital. More precisely, we started from a basic model, the well-known UNet, then we added an attention mechanism to obtain an Attention-UNet, and finally we employed a recurrence paradigm to create a Recurrent-Residual UNet (R2-UNet). In the latter case, we also added attention gates to the decoding path of an R2-UNet, thus designing an R2-Attention UNet so as to make the feature representation and accumulation more effective. We compared them to gain understanding of both the cognitive mechanism that can lead a neural model to the best performance for this task and the good compromise between the amount of data, time, and computational resources required. We set up a five-fold cross-validation and assessed the strengths and limitations of these models by evaluating the performances in terms of Dice score, Precision, and Recall defined both on 2D images and on the entire 3D volume. From the results of the analysis, it can be concluded that Attention-UNet outperforms the other models by achieving the best performance of 81.93%, in terms of 2D Dice score, on the test set. Additionally, we conducted statistical analysis to assess the performance differences among the models. Our findings suggest that integrating the recurrence mechanism within the UNet architecture leads to a decline in the model's effectiveness for our particular application.

COVID-19 infection analysis framework using novel boosted CNNs and radiological images

COVID-19, a novel pathogen that emerged in late 2019, has the potential to cause pneumonia with unique variants upon infection. Hence, the development of efficient diagnostic systems is crucial in accurately identifying infected patients and effectively mitigating the spread of the disease. However, the system poses several challenges because of the limited availability of labeled data, distortion, and complexity in image representation, as well as variations in contrast and texture. Therefore, a novel two-phase analysis framework has been developed to scrutinize the subtle irregularities associated with COVID-19 contamination. A new Convolutional Neural Network-based STM-BRNet is developed, which integrates the Split-Transform-Merge (STM) block and Feature map enrichment (FME) techniques in the first phase. The STM block captures boundary and regional-specific features essential for detecting COVID-19 infectious CT slices. Additionally, by incorporating the FME and Transfer Learning (TL) concept into the STM blocks, multiple enhanced channels are generated to effectively capture minute variations in illumination and texture specific to COVID-19-infected images. Additionally, residual multipath learning is used to improve the learning capacity of STM-BRNet and progressively increase the feature representation by boosting at a high level through TL. In the second phase of the analysis, the COVID-19 CT scans are processed using the newly developed SA-CB-BRSeg segmentation CNN to accurately delineate infection in the images. The SA-CB-BRSeg method utilizes a unique approach that combines smooth and heterogeneous processes in both the encoder and decoder. These operations are structured to effectively capture COVID-19 patterns, including region-homogenous, texture variation, and border. By incorporating these techniques, the SA-CB-BRSeg method demonstrates its ability to accurately analyze and segment COVID-19 related data. Furthermore, the SA-CB-BRSeg model incorporates the novel concept of CB in the decoder, where additional channels are combined using TL to enhance the learning of low contrast regions. The developed STM-BRNet and SA-CB-BRSeg models achieve impressive results, with an accuracy of 98.01%, recall of 98.12%, F-score of 98.11%, Dice Similarity of 96.396%, and IOU of 98.85%. The proposed framework will alleviate the workload and enhance the radiologist's decision-making capacity in identifying the infected region of COVID-19 and evaluating the severity stages of the disease.

What Is Machine Learning, Artificial Neural Networks and Deep Learning?-Examples of Practical Applications in Medicine

Machine learning (ML), artificial neural networks (ANNs), and deep learning (DL) are all topics that fall under the heading of artificial intelligence (AI) and have gained popularity in recent years. ML involves the application of algorithms to automate decision-making processes using models that have not been manually programmed but have been trained on data. ANNs that are a part of ML aim to simulate the structure and function of the human brain. DL, on the other hand, uses multiple layers of interconnected neurons. This enables the processing and analysis of large and complex databases. In medicine, these techniques are being introduced to improve the speed and efficiency of disease diagnosis and treatment. Each of the AI techniques presented in the paper is supported with an example of a possible medical application. Given the rapid development of technology, the use of AI in medicine shows promising results in the context of patient care. It is particularly important to keep a close eye on this issue and conduct further research in order to fully explore the potential of ML, ANNs, and DL, and bring further applications into clinical use in the future.

A general approach for automatic segmentation of pneumonia, pulmonary nodule, and tuberculosis in CT images

Proposing a general segmentation approach for lung lesions, including pulmonary nodules, pneumonia, and tuberculosis, in CT images will improve efficiency in radiology. However, the performance of generative adversarial networks is hampered by the limited availability of annotated samples and the catastrophic forgetting of the discriminator, whereas the universality of traditional morphology-based methods is insufficient for segmenting diverse lung lesions. A cascaded dual-attention network with a context-aware pyramid feature extraction module was designed to address these challenges. A self-supervised rotation loss was designed to mitigate discriminator forgetting. The proposed model achieved Dice coefficients of 70.92, 73.55, and 68.52% on multi-center pneumonia, lung nodule, and tuberculosis test datasets, respectively. No significant decrease in accuracy was observed (p > 0.10) when a small training sample size was used. The cyclic training of the discriminator was reduced with self-supervised rotation loss (p < 0.01). The proposed approach is promising for segmenting multiple lung lesion types in CT images.

Retracted: Automatic COVID-19 Lung Infection Segmentation through Modified Unet Model

[This retracts the article DOI: 10.1155/2022/6566982.].

Classification of COVID-19 from community-acquired pneumonia: Boosting the performance with capsule network and maximum intensity projection image of CT scans

BACKGROUND

The coronavirus disease 2019 (COVID-19) and community-acquired pneumonia (CAP) present a high degree of similarity in chest computed tomography (CT) images. Therefore, a procedure for accurately and automatically distinguishing between them is crucial.

METHODS

A deep learning method for distinguishing COVID-19 from CAP is developed using maximum intensity projection (MIP) images from CT scans. LinkNet is employed for lung segmentation of chest CT images. MIP images are produced by superposing the maximum gray of intrapulmonary CT values. The MIP images are input into a capsule network for patient-level pred iction and diagnosis of COVID-19. The network is trained using 333 CT scans (168 COVID-19/165 CAP) and validated on three external datasets containing 3581 CT scans (2110 COVID-19/1471 CAP).

RESULTS

LinkNet achieves the highest Dice coefficient of 0.983 for lung segmentation. For the classification of COVID-19 and CAP, the capsule network with the DenseNet-121 feature extractor outperforms ResNet-50 and Inception-V3, achieving an accuracy of 0.970 on the training dataset. Without MIP or the capsule network, the accuracy decreases to 0.857 and 0.818, respectively. Accuracy scores of 0.961, 0.997, and 0.949 are achieved on the external validation datasets. The proposed method has higher or comparable sensitivity compared with ten state-of-the-art methods.

CONCLUSIONS

The proposed method illustrates the feasibility of applying MIP images from CT scans to distinguish COVID-19 from CAP using capsule networks. MIP images provide conspicuous benefits when exploiting deep learning to detect COVID-19 lesions from CT scans and the capsule network improves COVID-19 diagnosis.

COVID-19 CT ground-glass opacity segmentation based on attention mechanism threshold

The ground glass opacity (GGO) of the lung is one of the essential features of COVID-19. The GGO in computed tomography (CT) images has various features and low-intensity contrast between the GGO and edge structures. These problems pose significant challenges for segmenting the GGO. To tackle these problems, we propose a new threshold method for accurate segmentation of GGO. Specifically, we offer a framework for adjusting the threshold parameters according to the image contrast. Three functions include Attention mechanism threshold, Contour equalization, and Lung segmentation (ACL). The lung is divided into three areas using the attention mechanism threshold. Further, the segmentation parameters of the attention mechanism thresholds of the three parts are adaptively adjusted according to the image contrast. Only the segmentation regions restricted by the lung segmentation results are retained. Extensive experiments on four COVID datasets show that ACL can segment GGO images at low contrast well. Compared with the state-of-the-art methods, the similarity Dice of the ACL segmentation results is improved by 8.9%, the average symmetry surface distance ASD is reduced by 23%, and the required computational power F L O P s are only 0.09% of those of deep learning models. For GGO segmentation, ACL is more lightweight, and the accuracy is higher. Code will be released at https://github.com/Lqs-github/ACL.

Validation of a Deep Learning Model for Detecting Chest Pathologies from Digital Chest Radiographs

Purpose: Manual interpretation of chest radiographs is a challenging task and is prone to errors. An automated system capable of categorizing chest radiographs based on the pathologies identified could aid in the timely and efficient diagnosis of chest pathologies. Method: For this retrospective study, 4476 chest radiographs were collected between January and April 2021 from two tertiary care hospitals. Three expert radiologists established the ground truth, and all radiographs were analyzed using a deep-learning AI model to detect suspicious ROIs in the lungs, pleura, and cardiac regions. Three test readers (different from the radiologists who established the ground truth) independently reviewed all radiographs in two sessions (unaided and AI-aided mode) with a washout period of one month. Results: The model demonstrated an aggregate AUROC of 91.2% and a sensitivity of 88.4% in detecting suspicious ROIs in the lungs, pleura, and cardiac regions. These results outperform unaided human readers, who achieved an aggregate AUROC of 84.2% and sensitivity of 74.5% for the same task. When using AI, the aided readers obtained an aggregate AUROC of 87.9% and a sensitivity of 85.1%. The average time taken by the test readers to read a chest radiograph decreased by 21% (p < 0.01) when using AI. Conclusion: The model outperformed all three human readers and demonstrated high AUROC and sensitivity across two independent datasets. When compared to unaided interpretations, AI-aided interpretations were associated with significant improvements in reader performance and chest radiograph interpretation time.

HaTU-Net: Harmonic Attention Network for Automated Ovarian Ultrasound Quantification in Assisted Pregnancy

Antral follicle Count (AFC) is a non-invasive biomarker used to assess ovarian reserves through transvaginal ultrasound (TVUS) imaging. Antral follicles' diameter is usually in the range of 2-10 mm. The primary aim of ovarian reserve monitoring is to measure the size of ovarian follicles and the number of antral follicles. Manual follicle measurement is inhibited by operator time, expertise and the subjectivity of delineating the two axes of the follicles. This necessitates an automated framework capable of quantifying follicle size and count in a clinical setting. This paper proposes a novel Harmonic Attention-based U-Net network, HaTU-Net, to precisely segment the ovary and follicles in ultrasound images. We replace the standard convolution operation with a harmonic block that convolves the features with a window-based discrete cosine transform (DCT). Additionally, we proposed a harmonic attention mechanism that helps to promote the extraction of rich features. The suggested technique allows for capturing the most relevant features, such as boundaries, shape, and textural patterns, in the presence of various noise sources (i.e., shadows, poor contrast between tissues, and speckle noise). We evaluated the proposed model on our in-house private dataset of 197 patients undergoing TransVaginal UltraSound (TVUS) exam. The experimental results on an independent test set confirm that HaTU-Net achieved a Dice coefficient score of 90% for ovaries and 81% for antral follicles, an improvement of 2% and 10%, respectively, when compared to a standard U-Net. Further, we accurately measure the follicle size, yielding the recall, and precision rates of 91.01% and 76.49%, respectively.

A robust semantic lung segmentation study for CNN-based COVID-19 diagnosis

This paper aims to diagnose COVID-19 by using Chest X-Ray (CXR) scan images in a deep learning-based system. First of all, COVID-19 Chest X-Ray Dataset is used to segment the lung parts in CXR images semantically. DeepLabV3+ architecture is trained by using the masks of the lung parts in this dataset. The trained architecture is then fed with images in the COVID-19 Radiography Database. In order to improve the output images, some image preprocessing steps are applied. As a result, lung regions are successfully segmented from CXR images. The next step is feature extraction and classification. While features are extracted with modified AlexNet (mAlexNet), Support Vector Machine (SVM) is used for classification. As a result, 3-class data consisting of Normal, Viral Pneumonia and COVID-19 class are classified with 99.8% success. Classification results show that the proposed method is superior to previous state-of-the-art methods.

SIL-Net: A Semi-Isotropic L-shaped network for dermoscopic image segmentation

BACKGROUND

Dermoscopic image segmentation using deep learning algorithms is a critical technology for skin cancer detection and therapy. Specifically, this technology is a spatially equivariant task and relies heavily on Convolutional Neural Networks (CNNs), which lost more effective features during cascading down-sampling or up-sampling. Recently, vision isotropic architecture has emerged to eliminate cascade procedures in CNNs as well as demonstrates superior performance. Nevertheless, it cannot be used for the segmentation task directly. Based on these discoveries, this research intends to explore an efficient architecture which not only preserves the advantages of the isotropic architecture but is also suitable for clinical dermoscopic diagnosis.

METHODS

In this work, we introduce a novel Semi-Isotropic L-shaped network (SIL-Net) for dermoscopic image segmentation. First, we propose a Patch Embedding Weak Correlation (PEWC) module to address the issue of no interaction between adjacent patches during the standard Patch Embedding process. Second, a plug-and-play and zero-parameter Residual Spatial Mirror Information (RSMI) path is proposed to supplement effective features during up-sampling and optimize the lesion boundaries. Third, to further reconstruct deep features and get refined lesion regions, a Depth Separable Transpose Convolution (DSTC) based up-sampling module is designed.

RESULTS

The proposed architecture obtains state-of-the-art performance on dermoscopy benchmark datasets ISIC-2017, ISIC-2018 and PH2. Respectively, the Dice coefficient (DICE) of above datasets achieves 89.63%, 93.47%, and 95.11%, where the Mean Intersection over Union (MIoU) are 82.02%, 88.21%, and 90.81%. Furthermore, the robustness and generalizability of our method has been demonstrated through additional experiments on standard intestinal polyp datasets (CVC-ClinicDB and Kvasir-SEG).

CONCLUSION

Our findings demonstrate that SIL-Net not only has great potential for precise segmentation of the lesion region but also exhibits stronger generalizability and robustness, indicating that it meets the requirements for clinical diagnosis. Notably, our method shows state-of-the-art performance on all five datasets, which highlights the effectiveness of the semi-isotropic design mechanism.

Automated diagnosis of COVID-19 using radiological modalities and Artificial Intelligence functionalities: A retrospective study based on chest HRCT database

Background and Objective

: The spread of coronavirus has been challenging for the healthcare system's proper management and diagnosis during the rapid spread and control of the infection. Real-time reverse transcription-polymerase chain reaction (RT-PCR), though considered the standard testing measure, has low sensitivity and is time-consuming, which restricts the fast screening of individuals. Therefore, computer tomography (CT) is used to complement the traditional approaches and provide fast and effective screening over other diagnostic methods. This work aims to appraise the importance of chest CT findings of COVID-19 and post-COVID in the diagnosis and prognosis of infected patients and to explore the ways and means to integrate CT findings for the development of advanced Artificial Intelligence (AI) tool-based predictive diagnostic techniques.

Methods

: The retrospective study includes a 188 patient database with COVID-19 infection confirmed by RT-PCR testing, including post-COVID patients. Patients underwent chest high-resolution computer tomography (HRCT), where the images were evaluated for common COVID-19 findings and involvement of the lung and its lobes based on the coverage region. The radiological modalities analyzed in this study may help the researchers in generating a predictive model based on AI tools for further classification with a high degree of reliability.

Results

: Mild to moderate ground glass opacities (GGO) with or without consolidation, crazy paving patterns, and halo signs were common COVID-19 related findings. A CT score is assigned to every patient based on the severity of lung lobe involvement.

Conclusion

: Typical multifocal, bilateral, and peripheral distributions of GGO are the main characteristics related to COVID-19 pneumonia. Chest HRCT can be considered a standard method for timely and efficient assessment of disease progression and management severity. With its fusion with AI tools, chest HRCT can be used as a one-stop platform for radiological investigation and automated diagnosis system.

An extensive review of state-of-the-art transfer learning techniques used in medical imaging: Open issues and challenges

Deep learning techniques, which use a massive technology known as convolutional neural networks, have shown excellent results in a variety of areas, including image processing and interpretation. However, as the depth of these networks grows, so does the demand for a large amount of labeled data required to train these networks. In particular, the medical field suffers from a lack of images because the procedure for obtaining labeled medical images in the healthcare field is difficult, expensive, and requires specialized expertise to add labels to images. Moreover, the process may be prone to errors and time-consuming. Current research has revealed transfer learning as a viable solution to this problem. Transfer learning allows us to transfer knowledge gained from a previous process to improve and tackle a new problem. This study aims to conduct a comprehensive survey of recent studies that dealt with solving this problem and the most important metrics used to evaluate these methods. In addition, this study identifies problems in transfer learning techniques and highlights the problems of the medical dataset and potential problems that can be addressed in future research. According to our review, many researchers use pre-trained models on the Imagenet dataset (VGG16, ResNet, Inception v3) in many applications such as skin cancer, breast cancer, and diabetic retinopathy classification tasks. These techniques require further investigation of these models, due to training them on natural, non-medical images. In addition, many researchers use data augmentation techniques to expand their dataset and avoid overfitting. However, not enough studies have shown the effect of performance with or without data augmentation. Accuracy, recall, precision, F1 score, receiver operator characteristic curve, and area under the curve (AUC) were the most widely used measures in these studies. Furthermore, we identified problems in the datasets for melanoma and breast cancer and suggested corresponding solutions.

COVID-RDNet: A novel coronavirus pneumonia classification model using the mixed dataset by CT and X-rays images

Corona virus disease 2019 (COVID-19) testing relies on traditional screening methods, which require a lot of manpower and material resources. Recently, to effectively reduce the damage caused by radiation and enhance effectiveness, deep learning of classifying COVID-19 negative and positive using the mixed dataset by CT and X-rays images have achieved remarkable research results. However, the details presented on CT and X-ray images have pathological diversity and similarity features, thus increasing the difficulty for physicians to judge specific cases. On this basis, this paper proposes a novel coronavirus pneumonia classification model using the mixed dataset by CT and X-rays images. To solve the problem of feature similarity between lung diseases and COVID-19, the extracted features are enhanced by an adaptive region enhancement algorithm. Besides, the depth network based on the residual blocks and the dense blocks is trained and tested. On the one hand, the residual blocks effectively improve the accuracy of the model and the non-linear COVID-19 features are obtained by cross-layer link. On the other hand, the dense blocks effectively improve the robustness of the model by connecting local and abstract information. On mixed X-ray and CT datasets, the sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), area under curve (AUC), and accuracy can all reach 0.99. On the basis of respecting patient privacy and ethics, the proposed algorithm using the mixed dataset from real cases can effectively assist doctors in performing the accurate COVID-19 negative and positive classification to determine the infection status of patients.

Performance Analysis for COVID-19 Diagnosis Using Custom and State-of-the-Art Deep Learning Models

The modern scientific world continuously endeavors to battle and devise solutions for newly arising pandemics. One such pandemic which has turned the world’s accustomed routine upside down is COVID-19: it has devastated the world economy and destroyed around 45 million lives, globally. Governments and scientists have been on the front line, striving towards the diagnosis and engineering of a vaccination for the said virus. COVID-19 can be diagnosed using artificial intelligence more accurately than traditional methods using chest X-rays. This research involves an evaluation of the performance of deep learning models for COVID-19 diagnosis using chest X-ray images from a dataset containing the largest number of COVID-19 images ever used in the literature, according to the best of the authors’ knowledge. The size of the utilized dataset is about 4.25 times the maximum COVID-19 chest X-ray image dataset used in the explored literature. Further, a CNN model was developed, named the Custom-Model in this study, for evaluation against, and comparison to, the state-of-the-art deep learning models. The intention was not to develop a new high-performing deep learning model, but rather to evaluate the performance of deep learning models on a larger COVID-19 chest X-ray image dataset. Moreover, Xception- and MobilNetV2- based models were also used for evaluation purposes. The criteria for evaluation were based on accuracy, precision, recall, F1 score, ROC curves, AUC, confusion matrix, and macro and weighted averages. Among the deployed models, Xception was the top performer in terms of precision and accuracy, while the MobileNetV2-based model could detect slightly more COVID-19 cases than Xception, and showed slightly fewer false negatives, while giving far more false positives than the other models. Also, the custom CNN model exceeds the MobileNetV2 model in terms of precision. The best accuracy, precision, recall, and F1 score out of these three models were 94.2%, 99%, 95%, and 97%, respectively, as shown by the Xception model. Finally, it was found that the overall accuracy in the current evaluation was curtailed by approximately 2% compared with the average accuracy of previous work on multi-class classification, while a very high precision value was observed, which is of high scientific value.

A System for a Real-Time Electronic Component Detection and Classification on a Conveyor Belt

The presented research addresses the real-time object detection problem with small and moving objects, specifically the surface-mount component on a conveyor. Detecting and counting small moving objects on the assembly line is a challenge. In order to meet the requirements of real-time applications, state-of-the-art electronic component detection and classification algorithms are implemented into powerful hardware systems. This work proposes a low-cost system with an embedded microcomputer to detect surface-mount components on a conveyor belt in real time. The system detects moving, packed, and unpacked surface-mount components. The system’s performance was experimentally investigated by implementing several object-detection algorithms. The system’s performance with different algorithm implementations was compared using mean average precision and inference time. The results of four different surface-mount components showed average precision scores of 97.3% and 97.7% for capacitor and resistor detection. The findings suggest that the system with the implemented YOLOv4-tiny algorithm on the Jetson Nano 4 GB microcomputer achieves a mean average precision score of 88.03% with an inference time of 56.4 ms and 87.98% mean average precision with 11.2 ms inference time on the Tesla P100 16 GB platform.