Angiogenic effects of suture biomaterials. An experimental study in rats

Three-Dimensional Imaging Provides Detailed Atherosclerotic Plaque Morphology and Reveals Angiogenesis After Carotid Artery Ligation

RATIONALE

Remodeling of the vessel wall and the formation of vascular networks are dynamic processes that occur during mammalian embryonic development and in adulthood. Plaque development and excessive neointima formation are hallmarks of atherosclerosis and vascular injury. As our understanding of these complex processes evolves, there is a need to develop new imaging techniques to study underlying mechanisms.

OBJECTIVE

We used tissue clearing and light-sheet microscopy for 3-dimensional (3D) profiling of the vascular response to carotid artery ligation and induction of atherosclerosis in mouse models.

METHODS AND RESULTS

Adipo-Clear and immunolabeling in combination with light-sheet microscopy were applied to image carotid arteries and brachiocephalic arteries, allowing for 3D reconstruction of vessel architecture. Entire 3D neointima formations with different geometries were observed within the carotid artery and scored by volumetric analysis. Additionally, we identified a CD31-positive adventitial plexus after ligation of the carotid artery that evolved and matured over time. We also used this method to characterize plaque extent and composition in the brachiocephalic arteries of ApoE-deficient mice on high-fat diet. The plaques exhibited inter-animal differences in terms of plaque volume, geometry, and ratio of acellular core to plaque volume. A 3D reconstruction of the endothelium overlying the plaque was also generated.

CONCLUSIONS

We present a novel approach to characterize vascular remodeling in adult mice using Adipo-Clear in combination with light-sheet microscopy. Our method reconstructs 3D neointima formation after arterial injury and allows for volumetric analysis of remodeling, in addition to revealing angiogenesis and maturation of a plexus surrounding the carotid artery. This method generates complete 3D reconstructions of atherosclerotic plaques and uncovers their volume, geometry, acellular component, surface, and spatial position within the brachiocephalic arteries. Our approach may be used in a number of mouse models of cardiovascular disease to assess vessel geometry and volume. Visual Overview: An online visual overview is available for this article.

Silk-based biomaterials in biomedical textiles and fiber-based implants

Biomedical textiles and fiber-based implants (BTFIs) have been in routine clinical use to facilitate healing for nearly five decades. Amongst the variety of biomaterials used, silk-based biomaterials (SBBs) have been widely used clinically viz. sutures for centuries and are being increasingly recognized as a prospective material for biomedical textiles. The ease of processing, controllable degradability, remarkable mechanical properties and biocompatibility have prompted the use of SBBs for various BTFIs for extracorporeal implants, soft tissue repair, healthcare/hygiene products and related needs. The present Review focuses on BTFIs from the perspective of types and physical and biological properties, and this discussion is followed with an examination of the advantages and limitations of BTFIs from SBBs. The Review covers progress in surface coatings, physical and chemical modifications of SBBs for BTFIs and identifies future needs and opportunities for the further development for BTFIs using SBBs.

The effects of tetracycline-loaded silk fibroin membrane on proliferation and osteogenic potential of mesenchymal stem cells

BACKGROUND

The main objective of this study was to investigate the effect of tetracycline-loaded silk fibroin membranes (TC-SFMs) on the proliferation and the osteogenic differentiation of human mesenchymal stem cells.

MATERIALS AND METHODS

Four groups (0, 1, 5, and 10% concentration) of TC-SFMs were prepared for the experiments. We investigated cumulative tetracycline (TC) release profile for 7 d. Human gingiva-derived mesenchymal stem cells (GMSCs) were isolated from our previous study and seeded to the TC-SFMs. WST-8 assay (Cell Counting Kit-8; SigmaeAldrich Co, St. Louis, MO), staining of Phalloidin-FITC, and scanning electron microscope analyzed the cellular attachment and viability. Staining of Alizarin Red S (Sigma-Aldrich Co.) and osteogenic marker (osteocalcin) analyzed osteogenic differentiation. Additionally, quantitative polymerase chain reaction measured the expression of osteogenic lineage genes, including bone gamma-carboxyglutamic acid protein, bone sialoprotein, runt-related transcription factor 2, and collagen type I α1 according to TC concentration (0.05, 0.1, 0.25, and 0.5 mg/mL).

RESULTS

The release of TC from TC-SFMs plateaued and neared completion in 24 h. Significantly higher viability was noted achieved in 1% and 5% TC-SFMs. The morphology of GMSCs on TC-SFMs at 0% and 1% concentration showed spindle shapes, but cells in 10% TC-SFMs appeared spheroid. During Alizarin Red S staining at 21 d of osteogenic differentiation, calcium and osteocalcin formation were significantly lower in the 10% TC-SFM group than in the 0, 1, and 5 groups. Compared with the control group, bone gamma-carboxyglutamic acid protein showed significantly low expression rate at TC concentration ≥0.05 mg/mL. Bone sialoprotein was low at TC concentration ≥0.1 mg/mL. Likewise, runt-related transcription factor 2 and collagen type I α1 were low at TC concentration of 0.5 mg/mL.

CONCLUSIONS

Within the limits of this study, 1% and 5% TC-SFMs showed higher proliferation and osteogenic potential of GMSCs than 10% TC-SFM. Therefore, the use of 1% to 5% range of TC may be more suitable to silk fibroin membrane for stem cell tissue engineering.

Microcryogels as injectable 3-D cellular microniches for site-directed and augmented cell delivery

The success of cell therapy for tissue repair and regeneration demands efficient and reliable cell delivery methods. Here we established a novel microengineered cryogel (microcryogel) array chip containing microcryogels with predefined size and shape as injectable cell delivery vehicles. The microscale macroporous cryogels enabled automatic and homogeneous loading of tailored cellular niches (e.g. cells, matrices, bioactive factors) and could be easily harvested from the ready-to-use array chip. In contrast to microscale hydrogels, microcryogels exhibited excellent elasticity and could retain their shape and integrity after injection through the microsyringe routinely used for cell therapy. Human mesenchymal stromal cells loaded within microcryogels could be shielded from the mechanical insult and necrosis caused by during direct cell injection. After subcutaneous injection to the mice, cell-loaded microcryogels exhibited concentrated localization and enhanced retention at the injection site compared to dissociated cells. To demonstrate the potential therapeutic application for ischemic diseases, site-directed induction of angiogenesis was achieved subcutaneously in mice 2weeks after injection of NIH/3T3 fibroblast-loaded microcryogels, indicating long-term engraftment, accumulative paracrine stimulation and augmented host tissue integration. Our results convincingly showed the great promise of microcryogels as 3-D cellular microniches and injectable cell delivery vehicles to tackle major challenges faced by cell therapy-based regenerative medicine including shear-induced damages, uncontrolled localization, poor retention, limited cellular survival and functionalities in vivo.

The connective tissue response to Ti, NiCr and AgPd alloys

The aim of the study was to compare the connective tissue response of Lewis rats to Ti, NiCr and AgPd alloys. It was found that implants were covered by collagen-rich, well vascularized capsules. Titanium was covered by the thinnest capsule (57 ± 20 μm) and AgPd alloy was covered by the thickest capsule (239 ± 50 μm). The PCNA+ cell prevalence in the capsules was lower for titanium than for AgPd and NiCr. Mast cells formed a gradient to a depth of 1200 μm only for titanium implants. Cells with brown to black silver granules in the cytoplasm were observed close to AgPd implants. The results suggest that titanium implants induce a weaker connective tissue response than implants made from NiCr and AgPd alloys.

Tissue Response to Subcutaneously Implanted Recombinant Spider Silk: An in Vivo Study

Spider silk is an interesting biomaterial for medical applications. Recently, a method for production of recombinant spider silk protein (4RepCT) that forms macroscopic fibres in physiological solution was developed. Herein, 4RepCT and Mersilk^TM (control) fibres were implanted subcutaneously in rats for seven days, without any negative systemic or local reactions. The tissue response, characterised by infiltration of macrophages and multinucleated cells, was similar with both fibres, while only the 4RepCT-fibres supported ingrowth of fibroblasts and newly formed capillaries. This in vivo study indicates that 4RepCT-fibres are well tolerated and could be used for medical applications, e.g., tissue engineering.

Angiogenic and inflammatory host response to surgical meshes of different mesh architecture and polymer composition

One of the major challenges in hernia repair is the development of surgical meshes that guarantee an optimal biocompatibility and incorporation into the host tissue. For this purpose, it is necessary to study the impact of different mesh types on angiogenesis, inflammation, and tissue formation. In the present study, we analyzed the host tissue reaction to Prolene, Ultrapro, and Vicryl meshes over a 14-day period after implantation into the hamster dorsal skinfold chamber using intravital fluorescence microscopy and histology. Our results demonstrate that compared with the Prolene and Ultrapro mesh, the Vicryl mesh induced a more pronounced angiogenic and inflammatory host tissue response with formation of a densely vascularized granulation tissue, which was infiltrated by many inflammatory cells. However, the strong foreign body reaction was not associated with a better mesh incorporation, but resulted in a significantly reduced explantation strength when compared with that of Prolene and Ultrapro meshes. Histological examinations revealed that the granulation tissue surrounding the Vicryl mesh was instable, because of low collagen content and massive infiltration of inflammatory cells. Thus, our data demonstrate that a stronger angiogenic and inflammatory response to an implanted mesh does not necessarily result in a better incorporation into the host tissue.

Morfologia e resistência cicatriciais da parede abdominal após laparotomias longitudinal e transversal em coelhos

OBJETIVO: Foram estudadas comparativamente as laparotomias longitudinais paramediana e transversal avaliando-se a resistência cicatricial da parede abdominal e seu aspecto histológico, com peritônio suturado ou não. MÉTODO: 30 coelhos foram distribuídos em dois grupos: Grupo 1 (n = 10) - laparotomia longitudinal, Subgrupo 1A (n = 5) sutura das bainhas anterior e posterior do músculo reto abdominal, bem como do peritônio, Subgrupo 1B (n = 5) sutura da bainha anterior do músculo reto abdominal. Grupo 2 (n = 20) - laparotomia transversa, Subgrupo 2A (n = 5) sutura das bainhas anterior e posterior do músculo reto abdominal, bem como do peritônio, Subgrupo 2B (n = 5) sutura apenas da bainha anterior do músculo reto abdominal, Subgrupo 2C (n = 5) sutura, em plano único, do músculo reto abdominal e de sua bainha anterior, Subgrupo 2D (n = 5) síntese, da bainha posterior do músculo reto abdominal junto com o peritônio e, em seguida, sutura do músculo reto abdominal, complementada por sutura da bainha anterior desse músculo. Após 17 dias, foram retirados dois segmentos peritonio-aponeurotico-musculares da cicatriz para avaliação da resistência e de seus aspectos histológicos. RESULTADOS: O valor da resistência para cada um dos grupos avaliados mostrou 1A > 1B, 1A > 2A e 1B > 2B, e 2B > 2C > 2D > 2A (p = 0,014). Deiscência, infecção e aderências foram mais freqüentes no Grupo 2. A histologia mostrou degeneração e necrose muscular, com sua substituição por tecido conjuntivo fibroso maduro cicatricial. CONCLUSÃO: Esses dados indicam que o corte muscular transversal provoca maior enfraquecimento muscular e que o peritônio deixado aberto não altera a resistência cicatricial.

Biological efficacy of silk fibroin nanofiber membranes for guided bone regeneration

The favorable biological properties of silk fibroin (SF) nanofiber membrane make it a good candidate for clinical applications as a device in bone and periodontal regenerative therapy. The purpose of this study is to evaluate the biocompatibility of the SF nanofiber membrane, and to examine its effect on bone regeneration in a rabbit calvarial model. To examine the biocompatibility of the electrospun SF membrane, we investigated cell proliferation, morphology, and differentiation. The bone regenerative efficacy of the membrane was evaluated in the calvarial defect of rabbits. The cell numbers and osteocalcin production labels were significantly increased in accordance with culture period. Cells had a stellate shape and broad cytoplasmic extensions on the membrane. The cells showed activity of ALPase that was comparable to culture dishes, and were calcified similarly to culture dishes. In in vivo tests, a complete bony union across the defects was observed after 8 weeks. At 12 weeks, the defect had completely healed with new bone. In conclusion, the SF nanofiber membrane was shown to possess good biocompatibility with enhanced bone regeneration and no evidence of any inflammatory reaction. These results strongly suggest that the SF membrane should be useful as a tool for guided bone regeneration.

De novo engineering of reticular connective tissue in vivo by silk fibroin nonwoven materials

Biologically tolerated biomaterials are the focus of intense research. In this work, we examined the biocompatibility of three-dimensional (3D) nonwovens of sericin-deprived, Bombyx mori silk fibroin (SF) in beta-sheet form implanted into the subcutaneous tissue of C57BL6 mice, using sham-operated mice as controls. Both groups of mice similarly healed with no residual problem. Macroarray analysis showed that an early (day 3) transient expression of macrophage migration inhibitory factor (MIF) mRNA, but not of the mRNAs encoding for 22 additional proinflammatory cytokines, occurred solely at SF-grafted places, where no remarkable infiltration of macrophages or lymphocytes subsequently happened. Even an enduring moderate increase in total cytokeratins without epidermal hyperkeratosis and a transient (days 10-15) upsurge of vimentin occurred exclusively at SF-grafted sites, whose content of collagen type-I, after a delayed (day 15) rise, ultimately fell considerably under that proper of sham-operated places. By day 180, the interstices amid and surfaces of the SF chords, which had not been appreciably biodegraded, were crammed with a newly produced tissue histologically akin to a vascularized reticular connective tissue, while some macrophages but no lymphocytic infiltrates or fibrous capsules occurred in the adjoining tissues. Therefore, SF nonwovens may be excellent candidates for clinical applications since they both enjoy a long-lasting biocompatibility, inducing a quite mild foreign body response, but no fibrosis, and efficiently guide reticular connective tissue engineering.

Angiogenesis with biomaterial-based drug- and cell-delivery systems

Angiogenesis, the formation of new blood vessels from existing ones, is an important event in several biological processes, including wound healing. It plays a key role in determining the final functionality and integration of any implanted medical device. In addition, angiogenesis is a required event for organ development and has been accepted as a rate-limiting step in engineering tissue replacements. Besides these regenerative processes, uncontrolled angiogenesis is also involved in a number of pathologies, including tumor growth and metastases. Like angiogenesis, biomaterials also play a role in wound healing after medical device implantation and in tissue engineering. Interactions between the device biomaterials and host tissue will factor into the final device integration. Additionally, tissue-engineering strategies utilize biomaterials to a great extent because the paradigm of tissue engineering involves the use of cells, growth factors and scaffolding matrices in order to regenerate or replace tissue. Since almost all tissues are three-dimensional, the biomaterial scaffold plays an integral role in the paradigm. This review will emphasize the influence of biomaterials on angiogenesis as it applies to medical device implantation, tissue engineering and therapies for pathological angiogenesis.

Silk-based biomaterials

Silk from the silkworm, Bombyx mori, has been used as biomedical suture material for centuries. The unique mechanical properties of these fibers provided important clinical repair options for many applications. During the past 20 years, some biocompatibility problems have been reported for silkworm silk; however, contamination from residual sericin (glue-like proteins) was the likely cause. More recent studies with well-defined silkworm silk fibers and films suggest that the core silk fibroin fibers exhibit comparable biocompatibility in vitro and in vivo with other commonly used biomaterials such as polylactic acid and collagen. Furthermore, the unique mechanical properties of the silk fibers, the diversity of side chain chemistries for 'decoration' with growth and adhesion factors, and the ability to genetically tailor the protein provide additional rationale for the exploration of this family of fibrous proteins for biomaterial applications. For example, in designing scaffolds for tissue engineering these properties are particularly relevant and recent results with bone and ligament formation in vitro support the potential role for this biomaterial in future applications. To date, studies with silks to address biomaterial and matrix scaffold needs have focused on silkworm silk. With the diversity of silk-like fibrous proteins from spiders and insects, a range of native or bioengineered variants can be expected for application to a diverse set of clinical needs.