Brassica napus Haploid and Double Haploid Production and Its Latest Applications

Rapeseed is one of the most important oil crops in the world. Increasing demand for oil and limited agronomic capabilities of present-day rapeseed result in the need for rapid development of new, superior cultivars. Double haploid (DH) technology is a fast and convenient approach in plant breeding as well as genetic research. Brassica napus is considered a model species for DH production based on microspore embryogenesis; however, the molecular mechanisms underlying microspore reprogramming are still vague. It is known that morphological changes are accompanied by gene and protein expression patterns, alongside carbohydrate and lipid metabolism. Novel, more efficient methods for DH rapeseed production have been reported. This review covers new findings and advances in Brassica napus DH production as well as the latest reports related to agronomically important traits in molecular studies employing the double haploid rapeseed lines.

Genetic characteristics and ploidy trigger the high inducibility of double haploid (DH) inducer in Brassica napus

BACKGROUND

Our recently reported doubled haploid (DH) induction lines e.g., Y3380 and Y3560 are allo-octoploid (AAAACCCC, 2n = 8× ≈ 76), which can induce the maternal parent to produce DH individuals. Whether this induction process is related to the production of aneuploid gametes form male parent and genetic characteristics of the male parent has not been reported yet.

RESULTS

Somatic chromosome counts of DH inducer parents, female wax-less parent (W1A) and their F₁ hybrid individuals revealed the reliability of flow cytometry analysis. Y3560 has normal chromosome behavior in metaphase I and anaphase I, but chromosome division was not synchronized in the tetrad period. Individual phenotypic identification and flow cytometric fluorescence measurement of F₁ individual and parents revealed that DH individuals can be distinguished on the basis of waxiness trait. The results of phenotypic identification and flow cytometry can identify the homozygotes or heterozygotes of F₁ generation individuals. The data of SNP genotyping coupled with phenotypic waxiness trait revealed that the genetic distance between W1A and F₁ homozygotes were smaller as compared to their heterozygotes. It was found that compared with allo-octoploids, aneuploidy from allo-octoploid segregation did not significantly increase the DH induction rate, but reduced male infiltration rate and heterozygous site rate of induced F₁ generation. The ploidy, SNP genotyping and flow cytometry results cumulatively shows that DH induction is attributed to the key genes regulation from the parents of Y3560 and Y3380, which significantly increase the induction efficiency as compared to ploidy.

CONCLUSION

Based on our findings, we hypothesize that genetic characteristics and aneuploidy play an important role in the induction of DH individuals in Brassca napus, and the induction process has been explored. It provides an important insight for us to locate and clone the genes that regulate the inducibility in the later stage.

Comparative proteomic analysis provides new insights into regulation of microspore embryogenesis induction in winter triticale (× Triticosecale Wittm.) after 5-azacytidine treatment

Effective microspore embryogenesis (ME) requires substantial modifications in gene expression pattern, followed by changes in the cell proteome and its metabolism. Recent studies have awakened also interest in the role of epigenetic factors in microspore de-differentiation and reprogramming. Therefore, demethylating agent (2.5-10 μM 5-azacytidine, AC) together with low temperature (3 weeks at 4 °C) were used as ME-inducing tiller treatment in two doubled haploid (DH) lines of triticale and its effect was analyzed in respect of anther protein profiles, expression of selected genes (TAPETUM DETERMINANT1 (TaTPD1-like), SOMATIC EMBRYOGENESIS RECEPTOR KINASE 2 (SERK2) and GLUTATHIONE S-TRANSFERASE (GSTF2)) and ME efficiency. Tiller treatment with 5.0 µM AC was the most effective in ME induction; it was associated with (1) suppression of intensive anabolic processes-mainly photosynthesis and light-dependent reactions, (2) transition to effective catabolism and mobilization of carbohydrate reserve to meet the high energy demand of cells during microspore reprograming and (3) effective defense against stress-inducing treatment, i.e. protection of proper folding during protein biosynthesis and effective degradation of dysfunctional or damaged proteins. Additionally, 5.0 µM AC enhanced the expression of all genes previously identified as being associated with embryogenic potential of microspores (TaTPD1-like, SERK and GSTF2).

Advances in Gene Editing of Haploid Tissues in Crops

Emerging threats of climate change require the rapid development of improved varieties with a higher tolerance to abiotic and biotic factors. Despite the success of traditional agricultural practices, novel techniques for precise manipulation of the crop's genome are needed. Doubled haploid (DH) methods have been used for decades in major crops to fix desired alleles in elite backgrounds in a short time. DH plants are also widely used for mapping of the quantitative trait loci (QTLs), marker-assisted selection (MAS), genomic selection (GS), and hybrid production. Recent discoveries of genes responsible for haploid induction (HI) allowed engineering this trait through gene editing (GE) in non-inducer varieties of different crops. Direct editing of gametes or haploid embryos increases GE efficiency by generating null homozygous plants following chromosome doubling. Increased understanding of the underlying genetic mechanisms responsible for spontaneous chromosome doubling in haploid plants may allow transferring this trait to different elite varieties. Overall, further improvement in the efficiency of the DH technology combined with the optimized GE could accelerate breeding efforts of the major crops.

Anther Culture in Sweet Pepper (Capsicum annuum L.)

Peppers have a prominent role in traditional cuisine of many different countries all around the world. This is why pepper is one of the most important crops worldwide. Production of doubled haploid (DH) pepper plants has been assessed by different approaches, but at present, the most efficient and universal method is by far anther culture, based on the use of the Dumas de Vaulx et al. protocol published in 1981, and adapted to the particularities of each specific pepper background. In this chapter, we present a method to produce pepper DHs by anther culture, based on the Dumas de Vaulx et al. protocol, but including a number of modifications which, in our experience, allow for a more efficient production DH plants in different pepper genotypes.

Production of Doubled Haploid Plants in Cucumber (Cucumis sativus L.) Through Anther Culture

As in any other economically important crop, the possibility of producing fully homozygous, doubled haploid lines in cucumber allows for faster and cheaper breeding. At present, the fastest way to doubled haploidy is the production of cucumber haploid plants and duplication of their chromosomes to make them doubled haploid. In this chapter, we describe a complete protocol to successfully produce cucumber doubled haploid plants, including the evaluation of their ploidy level by flow cytometry. Briefly, this protocol involves a first step of anther culture to induce microspores to divide and proliferate forming calli. The calli produced are isolated from anthers and transferred first to a liquid medium and then to a solid medium to induce organogenesis. Organogenic shoots will eventually give rise to entire DH plants.

Doubled Haploid Production in High- and Low-Response Genotypes of Rapeseed (Brassica napus) Through Isolated Microspore Culture

Rapeseed (Brassica napus) is one of the most important oilseed crops worldwide. It is also a model system to study the process of microspore embryogenesis, due to the high response of some B. napus lines, and to the refinements of the protocols. This chapter presents a protocol for the induction of haploid and DH embryos in B. napus through isolated microspore culture in two specific backgrounds widely used in DH research, the high response DH4079 line and the low response DH12075 line. We also present methods to identify the best phenological window to identify buds with microspores/pollen at the right developmental stage to induce this process. Methods to determine microspore/pollen viability and to check the ploidy by flow cytometry are also described.

Doubled Haploids in Eggplant

Eggplant is a solanaceous crop cultivated worldwide for its edible fruit. Eggplant breeding programs are mainly aimed to the generation of F1 hybrids by crossing two highly homozygous, pure lines, which are traditionally obtained upon several self crossing generations, which is an expensive and time consuming process. Alternatively, fully homozygous, doubled haploid (DH) individuals can be induced from haploid cells of the germ line in a single generation. Several attempts have been made to develop protocols to produce eggplant DHs principally using anther culture and isolated microspore culture. Eggplant could be considered a moderately recalcitrant species in terms of ability for DH production. Anther culture stands nowadays as the most valuable technology to obtain eggplant DHs. However, the theoretical possibility of having plants regenerated from somatic tissues of the anther walls cannot be ruled out. For this reason, the use of isolated microspores is recommended when possible. This approach still has room for improvement, but it is largely genotype-dependent. In this review, we compile the most relevant advances made in DH production in eggplant, their application to breeding programs, and the future perspectives for the development of other, less genotype-dependent, DH technologies.

Copper Ions Induce DNA Sequence Variation in Zygotic Embryo Culture-Derived Barley Regenerants

In vitro tissue culture could be exploited to study cellular mechanisms that induce sequence variation. Altering the metal ion composition of tissue culture medium affects biochemical pathways involved in tissue culture-induced variation. Copper ions are involved in the mitochondrial respiratory chain and Yang cycle. Copper ions may participate in oxidative mutations, which may contribute to DNA sequence variation. Silver ions compete with copper ions to bind to the complex IV subunit of the respiratory chain, thus affecting the Yang cycle and DNA methylation. The mechanisms underlying somaclonal variation are unknown. In this study, we evaluated embryo-derived barley regenerants obtained from a single double-haploid plant via embryo culture under varying copper and silver ion concentrations and different durations of in vitro culture. Morphological variation among regenerants and the donor plant was not evaluated. Methylation-sensitive Amplified Fragment Length Polymorphism analysis of DNA samples showed DNA methylation pattern variation in CG and CHG (H = A, C, or T) sequence contexts. Furthermore, modification of in vitro culture conditions explained DNA sequence variation, demethylation, and de novo methylation in the CHG context, as indicated by analysis of variance. Linear regression indicated that DNA sequence variation was related to de novo DNA methylation in the CHG context. Mediation analysis showed the role of copper ions as a mediator of sequence variation in the CHG context. No other contexts showed a significant sequence variation in mediation analysis. Silver ions did not act as a mediator between any methylation contexts and sequence variation. Thus, incorporating copper ions in the induction medium should be treated with caution.

Overview of In Vitro and In Vivo Doubled Haploid Technologies

Doubled haploids (DH) have become a powerful tool to assist in different basic research studies, and also in applied research. The principal (but not the only) and routine use of DH by breeding companies is to produce pure lines for hybrid seed production in different crop species. Several decades after the discovery of haploid inducer lines in maize and of anther culture as a method to produce haploid plants from pollen precursors, the biotechnological revolution of the last decades allowed to the development of a variety of approaches to pursue the goal of doubled haploid production. Now, it is possible to produce haploids and DHs in many different species, because when a method does not work properly, there are several others to test. In this chapter, we overview the currently available approaches used to produce haploids and DHs by using methods based on in vitro culture, or involving the in vivo induction of haploid embryo development, or a combination of both.

Methods for Chromosome Doubling

The completely homozygous genetic background of doubled haploids (DHs) has many applications in breeding programs and research studies. Haploid induction and chromosome doubling of induced haploids are the two main steps of doubled haploid creation. Both steps have their own complexities. Chromosome doubling of induced haploids may happen spontaneously, although usually at a low rate. Therefore, artificial/induced chromosome doubling of haploid cells/plantlets is necessary to produce DHs at an acceptable level. The most common method is using some mitotic spindle poisons that target the organization of the microtubule system. Colchicine is a well-known and widely used antimitotic. However, there are substances alternative to colchicine in terms of efficiency, toxicity, safety, and genetic stability, which can be applied in in vitro and in vivo pathways. Both pathways have their own advantages and disadvantages. However, in vitro-induced chromosome doubling has been much preferred in recent years, maybe because of the dual effect of antimitotic agents (haploid induction and chromosome doubling) in just one step, and the reduced generation of chimeras. Plant genotype, the developmental stage of initial haploids, and type-concentration-duration of application of antimitotic agents, are top influential parameters on chromosome doubling efficiency. In this review, we highlight different aspects related to antimitotic agents and to plant parameters for successful chromosome doubling and high DH yield.

Optimized Protocol for Development of Androgenic Haploids and Doubled Haploids in FCV Tobacco (Nicotiana tabacum)

Haploids are plants with gametophytic chromosome number, which upon chromosome duplication results in production of doubled haploids (DHs). There are several methods to obtain haploids and DHs, of which in vitro anther culture is the most effective and widely used method in tobacco. The production of haploids and DHs through androgenesis allows for a single-step development of complete homozygous lines from heterozygous genotypes, shortening the time required to produce homozygous genotypes in comparison to the conventional breeding scheme. The DH development process comprises two main steps: induction of androgenesis and duplication of the haploid genome. The critical stages of DH protocol in tobacco are determining the bud stage for anther culture, pretreatment, anther culture media, detection and identification of haploids, and chromosome doubling. Here we present an efficient anther culture protocol to get haploids and DHs in flue-cured virginia (FCV) tobacco. This optimized protocol can be used as a potential tool for generation of haploids and DHs for genetic improvement of tobacco.

Genetic activity during early plant embryogenesis

Seeds are essential for human civilization, so understanding the molecular events underpinning seed development and the zygotic embryo it contains is important. In addition, the approach of somatic embryogenesis is a critical propagation and regeneration strategy to increase desirable genotypes, to develop new genetically modified plants to meet agricultural challenges, and at a basic science level, to test gene function. We briefly review some of the transcription factors (TFs) involved in establishing primary and apical meristems during zygotic embryogenesis, as well as TFs necessary and/or sufficient to drive somatic embryo programs. We focus on the model plant Arabidopsis for which many tools are available, and review as well as speculate about comparisons and contrasts between zygotic and somatic embryo processes.

In vitro androgenesis: spontaneous vs. artificial genome doubling and characterization of regenerants

Androgenesis has become the most frequently chosen method of doubled haploid (DH) production in major crops. Theoretically, plantlets derived from in vitro cultured microspore encompass half of the normal chromosome number of donor plants and thus, considered to be haploid. However, depending on species/genotype and the method of haploid production, either via anther or isolated microspore culture, different ratios of spontaneous DHs and diploid (2n) or even polyploid plants originating from somatic tissues or unreduced gametes may also arise in the cultures. Adopting the method of haploid identification, anti-microtubular agent for restoring fertility, and discriminating spontaneous DHs from undesired heterozygote plants will substantially affect the success of androgenesis in breeding programs. The recent advances in the last 2 decades have made it possible to characterize the in vitro regenerants efficiently either prior to genome duplication or using in breeding programs. The herein described approaches and antimicotubular agents are, therefore, expected to improve the efficiency of DH-based breeding pipeline through the in vitro androgenesis.

The Effect of Caffeine and Trifluralin on Chromosome Doubling in Wheat Anther Culture

Challenges for wheat doubled haploid (DH) production using anther culture include genotype variability in green plant regeneration and spontaneous chromosome doubling. The frequency of chromosome doubling in our program can vary from 14% to 80%. Caffeine or trifluralin was applied at the start of the induction phase to improve early genome doubling. Caffeine treatment at 0.5 mM for 24 h significantly improved green plant production in two of the six spring wheat crosses but had no effect on the other crosses. The improvements were observed in Trojan/Havoc and Lancer/LPB14-0392, where green plant numbers increased by 14% and 27% to 161 and 42 green plants per 30 anthers, respectively. Caffeine had no significant effect on chromosome doubling, despite a higher frequency of doubling in several caffeine treatments in the first experiment (67-68%) compared to the control (56%). In contrast, trifluralin significantly improved doubling following a 48 h treatment, from 38% in the control to 51% and 53% in the 1 µM and 3 µM trifluralin treatments, respectively. However, trifluralin had a significant negative effect on green plant regeneration, declining from 31.8 green plants per 20 anthers (control) to 9-25 green plants per 20 anthers in the trifluralin treatments. Further work is required to identify a treatment regime with caffeine and/or anti-mitotic herbicides that consistently increases chromosome doubling in wheat without reducing green plant regeneration.

Isolated Microspore Culture in Brassica napus

Isolated microspore culture is the most efficient technique among those used to induce microspore embryogenesis. In the particular case of Brassica napus, it is also the most widely used and optimized. In this chapter, we describe a protocol for microspore culture in B. napus which includes the steps necessary to isolate and culture microspores, to induce microspore-derived embryos, to produce doubled haploid plants from them, as well as to check for the developmental stage of the microspores isolated, their viability, and the ploidy level of regenerated plantlets.

Heritability of meiotic restitution and fertility restoration in haploid triticale

KEY MESSAGE

A single division meiosis mechanism of meiotic restitution is incompletely penetrant but significantly associated with restored fertility in triticale haploids (n = 21, genome formula ABR). Meiotic restitution, or failure of meiosis to produce gametes with a reduced chromosome number, can lead to the restoration of fertility in allohaploids. Meiotic restitution is of major interest for producing doubled haploids, as haploid plants undergoing meiotic restitution can often form seeds without the need to apply mitosis inhibitors to double chromosome number. We aimed to characterize meiotic restitution in a population of 183 haploids (n = 21, genome formula ABR) derived from an F1 wheat-rye hybrid where one parent was known to carry factors responsible for restoration of fertility in wide-cross haploids. Based on cytological analysis, approximately half of the plants analyzed were characterized by normal meiosis, while half showed at least some cytological evidence of meiotic restitution. However, this mechanism was incompletely penetrant in the population, with no individual plant showing 100% unreduced gamete formation: restitution occurred sectorially within each anther and was not observed in all the anthers of a given plant. Hence, the absence of meiotic restitution could not be confirmed conclusively for any individual plant, confounding this analysis. However, cytological observation of meiotic restitution was significantly associated with seed set, further confirming the role of meiotic restitution in fertility restoration. Our results provide insight into this mechanism of unreduced gamete formation, and provide a basis for future work identifying the genetic factors responsible for this trait.

Dynamic Changes in Arabinogalactan-Protein, Pectin, Xyloglucan and Xylan Composition of the Cell Wall During Microspore Embryogenesis in Brassica napus

Microspore embryogenesis is a manifestation of plant cell totipotency whereby new cell walls are formed as a consequence of the embryogenic switch. In particular, the callose-rich subintinal layer created immediately upon induction of embryogenesis was recently related to protection against stress. However, little is currently known about the functional significance of other compositional changes undergone by the walls of embryogenic microspores. We characterized these changes in Brassica napus at different stages during induction of embryogenic microspores and development of microspore-derived embryos (MDEs) by using a series of monoclonal antibodies specific for cell wall components, including arabinogalactan-proteins (AGPs), pectins, xyloglucan and xylan. We used JIM13, JIM8, JIM14 and JIM16 for AGPs, CCRC-M13, LM5, LM6, JIM7, JIM5 and LM7 for pectins, CCRC-M1 and LM15 for xyloglucan, and LM11 for xylan. By transmission electron microscopy and quantification of immunogold labeling on high-pressure frozen, freeze-substituted samples, we profiled the changes in cell wall ultrastructure and composition at the different stages of microspore embryogenesis. As a reference to compare with, we also studied in vivo microspores and maturing pollen grains. We showed that the cell wall of embryogenic microspores is a highly dynamic structure whose architecture, arrangement and composition changes dramatically as microspores undergo embryogenesis and then transform into MDEs. Upon induction, the composition of the preexisting microspore intine walls is remodeled, and unusual walls with a unique structure and composition are formed. Changes in AGP composition were related to developmental fate. In particular, AGPs containing the JIM13 epitope were massively excreted into the cell apoplast, and appeared associated to cell totipotency. According to the ultrastructure and the pectin and xyloglucan composition of these walls, we deduced that commitment to embryogenesis induces the formation of fragile, plastic and deformable cell walls, which allow for cell expansion and microspore growth. We also showed that these special walls are transient, since cell wall composition in microspore-derived embryos was completely different. Thus, once adopted the embryogenic developmental pathway and far from the effects of heat shock exposure, cell wall biosynthesis would approach the structure, composition and properties of conventional cell walls.

Novel technologies in doubled haploid line development

haploid inducer line can be transferred (DH) technology can not only shorten the breeding process but also increase genetic gain. Haploid induction and subsequent genome doubling are the two main steps required for DH technology. Haploids have been generated through the culture of immature male and female gametophytes, and through inter- and intraspecific via chromosome elimination. Here, we focus on haploidization via chromosome elimination, especially the recent advances in centromere-mediated haploidization. Once haploids have been induced, genome doubling is needed to produce DH lines. This study has proposed a new strategy to improve haploid genome doubling by combing haploids and minichromosome technology. With the progress in haploid induction and genome doubling methods, DH technology can facilitate reverse breeding, cytoplasmic male sterile (CMS) line production, gene stacking and a variety of other genetic analysis.

Androgenesis in Solanaceae

The Solanaceae is one of the most important families for global agriculture. Among the different solanaceous species, tobacco (Nicotiana tabacum), potato (Solanum tuberosum), tomato (Solanum lycopersicum), eggplant (Solanum melongena), and pepper (Capsicum annuum) are five crops of outstanding importance worldwide. In these crops, maximum yields are produced by hybrid plants created by crossing pure (homozygous) lines with the desired traits. Pure lines may be produced by conventional breeding methods, which is time consuming and costly. Alternatively, it is possible to accelerate the production of pure lines by creating doubled haploid (DH) plants derived from (haploid) male gametophytes or their precursors (androgenesis). In this way, the different steps for the production of pure lines can be reduced to only one generation, which implies important time and cost savings. This and other advantages make androgenic DHs the choice in a number of important crops where any of the different experimental in vitro techniques (anther culture or isolated microspore culture) is well set up. The Solanaceae family is an excellent example of heterogeneity in terms of response to these techniques, including highly responding species such as tobacco, considered a model system, and tomato, one of the most recalcitrant species, where no reliable and reproducible methods are yet available. Interestingly, the first evidence of androgenesis, particularly through in vitro anther culture, was demonstrated in a solanaceous species, Datura innoxia. In this chapter, we report the state of the art of the research about androgenic DHs in Solanaceae, paying special attention to datura, tobacco, potato, tomato, eggplant, and pepper.

Anther Culture in Pepper (Capsicum annuum L.)

Anther culture is the most popular of the techniques used to induce microspore embryogenesis. This technique is well set up in a wide range of crops, including pepper. In this chapter, a protocol for anther culture in pepper is described. The protocol presented hereby includes the steps from the selection of buds from donor plants to the regeneration and acclimatization of doubled haploid plants derived from the embryos, as well as a description of how to analyze the ploidy level of the regenerated plants.

Induction of Embryogenesis in Brassica Napus Microspores Produces a Callosic Subintinal Layer and Abnormal Cell Walls with Altered Levels of Callose and Cellulose

The induction of microspore embryogenesis produces dramatic changes in different aspects of the cell physiology and structure. Changes at the cell wall level are among the most intriguing and poorly understood. In this work, we used high pressure freezing and freeze substitution, immunolocalization, confocal, and electron microscopy to analyze the structure and composition of the first cell walls formed during conventional Brassica napus microspore embryogenesis, and in cultures treated to alter the intracellular Ca(2+) levels. Our results revealed that one of the first signs of embryogenic commitment is the formation of a callose-rich, cellulose-deficient layer beneath the intine (the subintinal layer), and of irregular, incomplete cell walls. In these events, Ca(2+) may have a role. We propose that abnormal cell walls are due to a massive callose synthesis and deposition of excreted cytoplasmic material, and the parallel inhibition of cellulose synthesis. These features were absent in pollen-like structures and in microspore-derived embryos, few days after the end of the heat shock, where abnormal cell walls were no longer produced. Together, our results provide an explanation to a series of relevant aspects of microspore embryogenesis including the role of Ca(2+) and the occurrence of abnormal cell walls. In addition, our discovery may be the explanation to why nuclear fusions take place during microspore embryogenesis.

Cellular dynamics during early barley pollen embryogenesis revealed by time-lapse imaging

Plants display a remarkable capacity for cellular totipotency. An intriguing and useful example is that immature pollen cultured in vitro can pass through embryogenic development to form haploid or doubled haploid plants. However, a lack of understanding the initial mechanisms of pollen embryogenesis hampers the improvement and more effective and widespread employment of haploid technology in plant research and breeding. To investigate the cellular dynamics during the onset of pollen embryogenesis, we used time-lapse imaging along with transgenic barley expressing nuclear localized Green Fluorescent Protein. The results enabled us to identify nine distinct embryogenic and non-embryogenic types of pollen response to the culture conditions. Cell proliferation in embryogenic pollen normally started via a first symmetric mitosis (54.3% of pollen observed) and only rarely did so via asymmetric pollen mitosis I (4.3% of pollen observed). In the latter case, proliferation generally originated from the vegetative-like cell, albeit the division of the generative-like cell was observed in few types of pollen. Under the culture conditions used, fusion of cell nuclei was the only mechanism of genome duplication observed.

Novel features of Brassica napus embryogenic microspores revealed by high pressure freezing and freeze substitution: evidence for massive autophagy and excretion-based cytoplasmic cleaning

Induction of embryogenesis from isolated microspore cultures is a complex experimental system where microspores undergo dramatic changes in developmental fate. After ~40 years of application of electron microscopy to the study of the ultrastructural changes undergone by the induced microspore, there is still room for new discoveries. In this work, high pressure freezing and freeze substitution (HPF/FS), the best procedures known to date for ultrastructural preservation, were used to process Brassica napus microspore cultures covering all the stages of microspore embryogenesis. Analysis of these cultures by electron microscopy revealed massive processes of autophagy exclusively in embryogenic microspores, but not in other microspore-derived structures also present in cultures. However, a significant part of the autophagosomal cargo was not recycled. Instead, it was transported out of the cell, producing numerous deposits of extracytoplasmic fibrillar and membranous material. It was shown that commitment of microspores to embryogenesis is associated with both massive autophagy and excretion of the removed material. It is hypothesized that autophagy would be related to the need for a profound cytoplasmic cleaning, and excretion would be a mechanism to avoid excessive growth of the vacuolar system. Together, the results also demonstrate that the application of HPF/FS to the study of the androgenic switch is the best option currently available to identify the complex and dramatic ultrastructural changes undergone by the induced microspore. In addition, they provide significant insights to understand the cellular basis of induction of microspore embryogenesis, and open a new door for the investigation of this intriguing developmental pathway.

Gametic embryogenesis and haploid technology as valuable support to plant breeding

Plant breeding is focused on continuously increasing crop production to meet the needs of an ever-growing world population, improving food quality to ensure a long and healthy life and address the problems of global warming and environment pollution, together with the challenges of developing novel sources of biofuels. The breeders' search for novel genetic combinations, with which to select plants with improved traits to satisfy both farmers and consumers, is endless. About half of the dramatic increase in crop yield obtained in the second half of the last century has been achieved thanks to the results of genetic improvement, while the residual advance has been due to the enhanced management techniques (pest and disease control, fertilization, and irrigation). Biotechnologies provide powerful tools for plant breeding, and among these ones, tissue culture, particularly haploid and doubled haploid technology, can effectively help to select superior plants. In fact, haploids (Hs), which are plants with gametophytic chromosome number, and doubled haploids (DHs), which are haploids that have undergone chromosome duplication, represent a particularly attractive biotechnological method to accelerate plant breeding. Currently, haploid technology, making possible through gametic embryogenesis the single-step development of complete homozygous lines from heterozygous parents, has already had a huge impact on agricultural systems of many agronomically important crops, representing an integral part in their improvement programmes. The aim of this review was to provide some background, recent advances, and future prospective on the employment of haploid technology through gametic embryogenesis as a powerful tool to support plant breeding.

Haploids in flowering plants: origins and exploitation

The first haploid angiosperm, a dwarf form of cotton with half the normal chromosome complement, was discovered in 1920, and in the ninety years since then such plants have been identified in many other species. They can occur either spontaneously or can be induced by modified pollination methods in vivo, or by in vitro culture of immature male or female gametophytes. Haploids represent an immediate, one-stage route to homozygous diploids and thence to F(1) hybrid production. The commercial exploitation of heterosis in such F(1) hybrids leads to the development of hybrid seed companies and subsequently to the GM revolution in agriculture. This review describes the range of techniques available for the isolation or induction of haploids and discusses their value in a range of areas, from fundamental research on mutant isolation and transformation, through to applied aspects of quantitative genetics and plant breeding. It will also focus on how molecular methods have been used recently to explore some of the underlying aspects of this fascinating developmental phenomenon.

Study of androgenesis and spontaneous chromosome doubling in barley ( Hordeum vulgare L.) genotypes using isolated microspore culture

This research aimed to study the androgenesis and spontaneous chromosome doubling of five barley genotypes using an isolated in vitro microspore culture technique, involving a completely randomized design (CRD) with three replications. Statistical analysis of embryogenesis and cytogenetic results showed that genotype had a significant effect on haploid embryogenesis (P<0.01) and on spontaneous chromosome doubling (P<0.05). The genotype Igri was found to have the highest potential to produce haploid embryos (1577 embryos from 100 anthers), followed by the genotypes Boyer/Rojo, Afzal/Turkman/Kavir, Ashar/Hebo and Agrigashar/Matico with 369, 304, 278 and 150 embryos from 100 anthers, respectively. The highest percentage of spontaneous chromosome doubling (76%) was observed for the genotype which had the lowest embryogenesis (Agrigashar/Matico) and the lowest (65%) for the genotype with the highest androgenic capacity (Igri). Microspore embryogenesis also showed comparatively higher genotypic (109.2) and phenotypic (109.5) coefficients of variation, heritability (99.62) and genetic advance (1206.77), indicating the pre-dominance of additive gene action in the control of this character in the material studied. Estimates of genetic parameters (PCV, GCV and heritability) for microspore embryogenesis were higher than for spontaneous doubled haploids. These results indicated that selection for androgenic capacity would be more effective than for spontaneous doubled haploids. The findings showed a negative relationship (r= −0.68) between embryogenesis and spontaneous chromosome doubling in the barley genotypes studied. All the large embryos used had high regenerability and good plantlet formation.

How microspores transform into haploid embryos: changes associated with embryogenesis induction and microspore-derived embryogenesis

Microspore embryogenesis is the most powerful androgenic pathway to produce haploid and doubled haploid plants. To deviate a microspore toward embryogenesis, a number of factors, different for each species, must concur at the same time and place. Once induced, the microspore undergoes numerous changes at different levels, from overall morphology to gene expression. Induction of microspore embryogenesis not only implies the expression of an embryogenic program, but also a stress-related cellular response and a repression of the gametophytic program to revert the microspore to a totipotent status. In this review, we compile the most recent advances in the understanding of the changes undergone by the induced microspore to readapt to the new developmental scenario. We devote special attention to the efforts made to uncover changes in the transcriptome of the induced microspore and microspore-derived embryo (MDE). Finally, we discuss the influence that an in vitro environment exerts over the MDE, as compared with its zygotic counterpart.