Gene-Activated Titanium Surfaces Promote In Vitro Osteogenesis

Tissue-engineered bone construct promotes early osseointegration of implants with low primary stability in oversized osteotomy

OBJECTIVES

To evaluate the histological parameters and bone mechanical properties around implants with low primary stability (PS) in grafted bone substitutes within an oversized osteotomy.

MATERIALS AND METHODS

An oversized osteotomy penetrating the double cortical bone layers was made on both femora of 24 New Zealand white rabbits. Bilaterally in the femur of all animals, 48 implants were installed, subdivided into four groups, corresponding to four prepared tissue-engineering bone complexes (TEBCs), which were placed between the implant surface and native bone wall: A: tricalcium phosphate β (TCP-β); B: autologous adipose derived-stem cells with TCP-β (ASCs/TCP-β); C: ASCs transfected with the enhanced-GFP gene with TCP-β (EGFP-ASCs/TCP-β); D: ASCs transfected with the BMP-2 gene with TCP-β (BMP2-ASCs/TCP-β). Trichrome fluorescent labeling was conducted. Animals were sacrificed after eight weeks. The trichromatic fluorescent labeling (%TFL), area of new bone (%NB), residual material (%RM), bone-implant contact (%BIC), and the removal torque force (RTF, N/cm) were assessed.

RESULTS

ASCs were successfully isolated from adipose tissue, and the primary ASCs were induced into osteogenic, chondrogenic, and adipogenic differentiation. The BMP-2 overexpression of ASCs sustained for ten days and greatly enhanced the expression of osteopontin (OPN). At eight weeks post-implantation, increased %NB and RTF were found in all groups. The most significant value of %TFL, %BIC and lowest %RM was detected in group D.

CONCLUSION

The low PS implants osseointegrate with considerable new bone in grafted TEBCs within an oversized osteotomy. Applying BMP-2 overexpressing ASCs-based TEBC promoted earlier osseointegration and more solid bone mechanical properties on low PS implants. Bone graft offers a wedging effect for the implant with low PS at placement and promotes osteogenesis on their surface in the healing period.

Fibrous topology promoted pBMP2-activated matrix on titanium implants boost osseointegration

Titanium (Ti) implants have been extensively used after surgical operations. Its surface bioactivity is of importance to facilitate integration with surrounding bone tissue, and ultimately ensure stability and long-term functionality of the implant. The plasmid DNA-activated matrix (DAM) coating on the surface could benefit osseointegration but is still trapped by poor transfection for further application, especially on the bone marrow mesenchymal stem cells (BMSCs) in vivo practical conditions. Herein, we constructed a DAM on the surface of fibrous-grained titanium (FG Ti) composed of phase-transition lysozyme (P) as adhesive, cationic arginine-rich lipid (RLS) as the transfection agent and plasmid DNA (pDNA) for bone morphology protein 2 (BMP2) expression. The cationic lipid RLS improved up to 30-fold higher transfection than that of commercial reagents (Lipofectamine 2000 and polyethyleneimine) on MSC. And importantly, Ti surface topology not only promotes the DAM to achieve high transfection efficiency (∼75.7% positive cells) on MSC due to the favorable combination but also reserves its contact induction effect for osteoblasts. Upon further exploration, the fibrous topology on FG Ti could boost pDNA uptake for gene transfection, and cell migration in MSC through cytoskeleton remodeling and induce contact guidance for enhanced osteointegration. At the same time, the cationic RLS together with adhesive P were both antibacterial, showing up to 90% inhibition rate against Escherichia coli and Staphylococcus aureus with reduced adherent microorganisms and disrupted bacteria. Finally, the FG Ti-P/pBMP2 implant achieved accelerated bone healing capacities through highly efficient gene delivery, aligned surface topological structure and increased antimicrobial properties in a rat femoral condylar defect model.

Gene-Activated Materials in Regenerative Dentistry: Narrative Review of Technology and Study Results

Treatment of a wide variety of defects in the oral and maxillofacial regions requires the use of innovative approaches to achieve best outcomes. One of the promising directions is the use of gene-activated materials (GAMs) that represent a combination of tissue engineering and gene therapy. This approach implies that biocompatible materials will be enriched with gene-carrying vectors and implanted into the defect site resulting in transfection of the recipient's cells and secretion of encoded therapeutic protein in situ. GAMs may be presented in various designs depending on the type of material, encoded protein, vector, and way of connecting the vector and the material. Thus, it is possible to choose the most suitable GAM design for the treatment of a particular pathology. The use of plasmids for delivery of therapeutic genes is of particular interest. In the present review, we aimed to delineate the principle of work and various designs of plasmid-based GAMs and to highlight results of experimental and clinical studies devoted to the treatment of periodontitis, jaw bone defects, teeth avulsion, and other pathologies in the oral and maxillofacial regions.

The clinical effect of ossotide for injection in the treatment of condylar fracture

OBJECTIVES

Patients with condylar fractures were treated with osteopeptide injections as an adjuvant therapy to assess pain control and changes in interleukin-1β (IL-1β) and bone G-gla protein (BGP) levels.

MATERIALS AND METHODS

Eighty-two patients with a condylar neck fracture were randomly assigned to two groups. The control group received conventional surgical treatment, while the experimental group received osteopeptide injections in addition to surgery. Pain level, IL-1β, and BGP levels were evaluated at 1, 2, and 4 weeks postsurgery.

RESULTS

One and two weeks postsurgery, the experimental group had lower Numeric Rating Scale scores compared to the control group. In addition, the IL-1β level in patients receiving osteopeptide injections was lower than the control group at all three evaluation points (1, 2, and 4 weeks postsurgery) and the BGP level was higher with statistically significant differences (P < 0.05).

CONCLUSIONS

The administration of osteopeptide injections as an adjuvant therapy for patients with condylar fractures can effectively reduce pain and facilitate faster initiation of muscle function training. In addition, the reduction of inflammatory factors and promotion of active osteogenesis leads to quicker wound healing.

Application of Lyophilized Gene-Delivery Formulations to Dental Implant Surfaces: Non-Cariogenic Lyoprotectant Preserves Transfection Activity of Polyplexes Long-Term

Titanium is the metal of choice for dental implants because of its biocompatibility and ability to merge with human bone tissue. Despite the great success rate of dental implants, early and late complications occur. Coating titanium dental implant surfaces with polyethyleneimine (PEI)-plasmid DNA (pDNA) polyplexes improve osseointegration by generating therapeutic protein expression at the implantation site. Lyophilization is an approach for stabilizing polyplexes and extending their shelf life; however, most lyoprotectants are sugars that can aid bacterial growth in the peri-implant environment. In our research, we coated titanium surfaces with polyplex solutions containing varying amounts of lyoprotectants. We used two common lyoprotectants (sucrose and polyvinylpyrrolidone K30) and showed for the first time that sucralose (a sucrose derivative used as an artificial sweetener) might act as a lyoprotectant for polyplex solutions. Human embryonic kidney (HEK) 293T cells were used to quantify the transfection efficiency and cytotoxicity of the polyplex/lyoprotectant formulations coating titanium surfaces. Polyplexes that were lyophilized in the presence of a lyoprotectant displayed both preserved particle size and high transfection efficiencies. Polyplexes lyophilized in 2% sucralose have maintained transfection efficacy for three years. These findings suggest that modifying dental implants with lyophilized polyplexes might improve their success rate in the clinic.

Gene-activated titanium implants for gene delivery to enhance osseointegration

Osseointegration is the direct and intimate contact between mineralized tissue and titanium implant at the bone-implant interface. Early establishment and stable maintenance of osseointegration is the key to long-term implant success. However, in patients with compromised conditions such as osteoporosis and patients beginning early load-bearing activities such as walking, lower osseointegration around titanium implants is often observed, which might result in implant early failure. Gene-activated implants show an exciting prospect of combining gene delivery and biomedical implants to solve the problems of poor osseointegration formation, overcoming the shortcomings of protein therapy, including rapid degradation and overdose adverse effects. The conception of gene-activated titanium implants is based on "gene-activated matrix" (GAM), which means scaffolds using non-viral vectors for in situ gene delivery to achieve a long-term and efficient transfection of target cells. Current preclinical studies in animal models have shown that plasmid DNA (pDNA), microRNA (miRNA), and small interference RNA (siRNA) functionalized titanium implants can enhance osseointegration with safety and efficiency, leading to the expectation of applying this technique in dental and orthopedic clinical scenarios. This review aims to comprehensively summarize fabrication strategies, current applications, and futural outlooks of gene-activated implants, emphasizing nucleic acid targets, non-viral vectors, implant surface modification techniques, nucleic acid/vector complexes loading strategies.

Properties improvement of titanium alloys scaffolds in bone tissue engineering: a literature review

Owing to their excellent biocompatibility and corrosion-resistant properties, titanium (Ti) (and its alloy) are essential artificial substitute biomaterials for orthopedics. However, flaws, such as weak osteogenic induction ability and higher Young's modulus, have been observed during clinical application. As a result, short- and long-term postoperative follow-up has found that several complications have occurred. For decades, scientists have exerted efforts to compensate for these deficiencies. Different modification methods have been investigated, including changing alloy contents, surface structure transformation, three-dimensional (3D) structure transformation, coating, and surface functionalization technologies. The cell-surface interaction effect and imitation of the natural 3D bone structure are the two main mechanisms of these improved methods. In recent years, significant progress has been made in materials science research methods, including thorough research of titanium alloys of different compositions, precise surface pattern control technology, controllable 3D structure construction technology, improvement of coating technologies, and novel concepts of surface functionalization. These improvements facilitate the possibility for further research in the field of bone tissue engineering. Although the underlying mechanism is still not fully understood, these studies still have some implications for clinical practice. Therefore, for the direction of further research, it is beneficial to summarize these studies according to the basal method used. This literature review aimed to classify these technologies, thereby providing beginners with a preliminary understanding of the field.

Multifunctional natural polymer-based metallic implant surface modifications

High energy traumas could cause critical damage to bone, which will require permanent implants to recover while functionally integrating with the host bone. Critical sized bone defects necessitate the use of bioactive metallic implants. Because of bioinertness, various methods involving surface modifications such as surface treatments, the development of novel alloys, bioceramic/bioglass coatings, and biofunctional molecule grafting have been utilized to effectively integrate metallic implants with a living bone. However, the applications of these methods demonstrated a need for an interphase layer improving bone-making to overcome two major risk factors: aseptic loosening and peri-implantitis. To accomplish a biologically functional bridge with the host to prevent loosening, regenerative cues, osteoimmunomodulatory modifications, and electrochemically resistant layers against corrosion appeared as imperative reinforcements. In addition, interphases carrying antibacterial cargo were proven to be successful against peri-implantitis. In the literature, metallic implant coatings employing natural polymers as the main matrix were presented as bioactive interphases, enabling rapid, robust, and functional osseointegration with the host bone. However, a comprehensive review of natural polymer coatings, bridging and grafting on metallic implants, and their activities has not been reported. In this review, state-of-the-art studies on multifunctional natural polymer-based implant coatings effectively utilized as a bone tissue engineering (BTE) modality are depicted. Protein-based, polysaccharide-based coatings and their combinations to achieve better osseointegration via the formation of an extracellular matrix-like (ECM-like) interphase with gap filling and corrosion resistance abilities are discussed in detail. The hypotheses and results of these studies are examined and criticized, and the potential future prospects of multifunctional coatings are also proposed as final remarks.

Harnessing biomolecules for bioinspired dental biomaterials

Dental clinicians have relied for centuries on traditional dental materials (polymers, ceramics, metals, and composites) to restore oral health and function to patients. Clinical outcomes for many crucial dental therapies remain poor despite many decades of intense research on these materials. Recent attention has been paid to biomolecules as a chassis for engineered preventive, restorative, and regenerative approaches in dentistry. Indeed, biomolecules represent a uniquely versatile and precise tool to enable the design and development of bioinspired multifunctional dental materials to spur advancements in dentistry. In this review, we survey the range of biomolecules that have been used across dental biomaterials. Our particular focus is on the key biological activity imparted by each biomolecule toward prevention of dental and oral diseases as well as restoration of oral health. Additional emphasis is placed on the structure-function relationships between biomolecules and their biological activity, the unique challenges of each clinical condition, limitations of conventional therapies, and the advantages of each class of biomolecule for said challenge. Biomaterials for bone regeneration are not reviewed as numerous existing reviews on the topic have been recently published. We conclude our narrative review with an outlook on the future of biomolecules in dental biomaterials and potential avenues of innovation for biomaterial-based patient oral care.

A proof of concept gene-activated titanium surface for oral implantology applications

Dental implants are very successful medical devices, yet implant failures do occur due to biological and mechanical complications. Peri-implantitis is one such biological complication that is primarily caused by bacteria and their products at the implant soft tissue interface. Bacterial infiltration can be prevented by the formation of a reliable soft tissue seal encircling dental implants. Platelet-derived growth factor-BB (PDGF-BB) has significant chemotactic and proliferative effects on various mesenchymal cell types, including fibroblasts, and therefore can be an effective molecule to enhance the peri-implant soft tissue seal. To overcome the limitations of the recombinant protein form of PDGF-BB, such as cost and the need for supraphysiological doses, we have developed and characterized a titanium surface that is rendered bioactive by coating it with polyethylenimine-plasmid DNA (pDNA) nanoplexes in the presence of sucrose. Human embryonic kidney 293T (HEK293T) cells and human primary gingival fibroblasts (GFs) were successfully transfected in culture with enhanced green fluorescent protein (EGFP)-encoding pDNA or platelet-derived growth factor subunit B (PDGFB)-encoding pDNA loaded into nanoplexes and coated onto titanium disks in a dose-dependent manner. GFs were shown to secrete PDGF-BB for at least 7 days after transfection and displayed both minimal viability loss and increased integrin-α2 expression 4 days posttransfection.

Exosomes influence the behavior of human mesenchymal stem cells on titanium surfaces

Mesenchymal stem cells (MSCs) have important roles during osseointegration. This study determined (i) if MSC-derived extracellular vesicles (EVs)/exosomes can be immobilized on titanium (Ti) surfaces and influence the behavior of MSCs, (ii) if the response is differentially affected by EVs from expanded vs differentiated MSCs and (iii) if the EV protein cargos predict the functional features of the exosomes. EVs secreted by human adipose-derived MSCs were isolated by ultracentrifugation and analyzed using nanoparticle tracking analysis, Western blotting and relative quantitative mass spectrometry. Fluorescence microscopy, scanning electron microscopy, cell counting assay and quantitative polymerase chain reaction were used to analyze MSC adhesion, proliferation and differentiation. Exosome immobilization on Ti promoted MSC adhesion and spreading after 24 h and proliferation after 3 and 6 days, irrespective of whether the exosomes were obtained from expansion or differentiation conditions. Immobilized exosomes upregulated stromal cell-derived factor (SDF-1α) gene expression. Cell adhesion molecules and signaling molecules were abundant in the exosomal proteome. The predicted functions of the equally-abundant proteins in both exosome types were in line with the observed biological effects mediated by the exosomes. Thus, exosomes derived from MSCs and immobilized on Ti surfaces interact with MSCs and rapidly promote MSC adhesion and proliferation. These findings provide a novel route for modification of titanium implant surfaces.

Bone Regeneration Using Gene-Activated Matrices

Gene delivery to bone is a potential therapeutic strategy for directed, sustained, and regulated protein expression. Tissue engineering strategies for bone regeneration include delivery of proteins, genes (viral and non-viral-mediated delivery), and/or cells to the bone defect site. In addition, biomimetic scaffolds and scaffolds incorporating bone anabolic agents greatly enhance the bone repair process. Regional gene therapy has the potential of enhancing bone defect healing and bone regeneration by delivering osteogenic genes locally to the osseous lesions, thereby reducing systemic toxicity and the need for using supraphysiological dosages of therapeutic proteins. By implanting gene-activated matrices (GAMs), sustained gene expression and continuous osteogenic protein production in situ can be achieved in a way that stimulates osteogenesis and bone repair within osseous defects. Critical parameters substantially affecting the therapeutic efficacy of gene therapy include the choice of osteogenic transgene(s), selection of non-viral or viral vectors, the wound environment, and the selection of ex vivo and in vivo gene delivery strategies, such as GAMs. It is critical for gene therapy applications that clinically beneficial amounts of proteins are synthesized endogenously within and around the lesion in a sustained manner. It is therefore necessary that reliable and reproducible methods of gene delivery be developed and tested for their efficacy and safety before translating into clinical practice. Practical considerations such as the age, gender, and systemic health of patients and the nature of the disease process also need to be taken into account in order to personalize the treatments and progress towards developing a clinically applicable gene therapy for healing bone defects. This review discusses tissue engineering strategies to regenerate bone with specific focus on non-viral gene delivery systems.