Paclitaxel stent coating inhibits neointimal hyperplasia at 4 weeks in a porcine model of coronary restenosis

High- Versus Low-Dose Paclitaxel-Coated Balloons for Femoropopliteal Disease: A systematic review and meta-analysis

To evaluate the comparative effectiveness of high- and low doses of paclitaxel in endovascular revascularization procedures for patients with femoropopliteal disease. The databases (Embase, PubMed, Scopus, and Web of Science) were searched for studies that had compared outcomes of high-dose and low-dose paclitaxel-coated balloons (PCBs) in the treatment of patients with femoropopliteal disease. Randomized controlled trials and nonrandomized comparative studies (eg, cohort studies and case-control studies) were eligible for inclusion. The primary outcomes of interest were patency rates, risk of restenosis, and clinically-driven target lesion revascularization (CD-TLR). Pooled effect sizes were reported as relative risk (RR) with 95% confidence intervals (CI). The analysis included 7 studies. High-dose PCB use was associated with higher patency (RR, 1.10; 95% CI, 1.00-1.21), reduced risk of restenosis (RR, 0.60; 95% CI, 0.46-0.79), and reduced need for CT-TLR (RR, 0.57; 95% CI, 0.41-0.79) compared to low-dose PCB. Rates of limb salvage (RR, 1.01; 95% CI, 0.99-1.04), freedom from major adverse limb events (RR, 1.39; 95% CI, 0.79-2.42), and overall survival (RR, 1.02; 95% CI, 0.99-1.05) were comparable in the 2 groups. There was no evidence of publication bias. High-dose PCB correlates with superior outcomes in patients with femoropopliteal disease, particularly in terms of better vascular patency, reduced restenosis risk, and lower need for target lesion revascularization, compared to low-dose PCB.

Benefits and Challenges of Drug-Coated Balloons in Peripheral Artery Disease: From Molecular Mechanisms to Clinical Practice

Multiple clinical trials have reported favorable outcomes after drug-coated balloon therapy for peripheral artery disease in above-the-knee and below-the-knee lesions and in both de novo and in-stent restenosis. However, there are still insufficient data to identify and tackle the risk factors associated with a higher risk of restenosis, which is the primary concern for patients who are treated with an endovascular approach. A modern armamentarium, which includes improved lesion preparation techniques such as plaque modification balloons, mechanical atherectomy, intravascular lithotripsy, and imaging, is crucial for obtaining better long-term clinical outcomes. Moreover, a better understanding of the molecular properties of drug-coated balloons has led to improved devices that could tackle the shortcomings of previous generations. This comprehensive review focuses on drug-coated balloon technology as a tool to treat peripheral artery disease and the effects of the molecular mechanisms involved in preventing vascular restenosis.

Efficacy and safety of drug-coated balloons in chronic total coronary occlusion recanalization: a systematic review and meta-analysis

BACKGROUND

With advancements in chronic total coronary occlusion (CTO) recanalization techniques and concepts, the success rate of recanalization has been steadily increasing. However, the current data are too limited to draw any reliable conclusions about the efficacy and safety of drug-coated balloons (DCBs) in CTO percutaneous coronary intervention (PCI). Herein, we conducted a meta-analysis to confirm the efficacy of DCB in CTO PCI.

METHODS

We systematically searched PubMed, Web of Science and Embase from inception to July 25, 2023. The primary outcome was major advent cardiovascular events (MACE), including cardiac death, nonfatal myocardial infarction (MI), target lesion revascularization (TLR), and target vessel revascularization (TVR). The follow-up angiographic endpoints were late lumen enlargement (LLE), reocclusion and restenosis.

RESULTS

Five studies with a total of 511 patients were included in the meta-analysis. Across studies, patients were predominantly male (72.9-85.7%) and over fifty years old. The summary estimate rate of MACE was 13.0% (95% CI 10.1%-15.9%, I2 = 0%, p = 0.428). The summary estimate rates of cardiac death and MI were 2.2% (95% CI 0.7%-3.7%, I2 = 0%, p = 0.873) and 1.2% (95% CI -0.2-2.6%, I2 = 13.7%, p = 0.314), respectively. Finally, the pooled incidences of TLR and TVR were 10.1% (95% CI 5.7%-14.5%, I2 = 51.7%, p = 0.082) and 7.1% (95% CI 3.0%-11.2%, I2 = 57.6%, p = 0.070), respectively. Finally, the summary estimate rates of LLE, reocclusion and restenosis were 59.4% (95% CI 53.5-65.3%, I2 = 0%, p = 0.742), 3.3% (95% CI 1.1-5.4%, I2 = 0%, p = 0.865) and 17.5% (95% CI 12.9-22.0%, I2 = 0%, p = 0.623), respectively.

CONCLUSION

Accordingly, DCB has the potential to be used as a treatment for CTO in suitable patients.

REDV-Functionalized Recombinant Spider Silk for Next-Generation Coronary Artery Stent Coatings: Hemocompatible, Drug-Eluting, and Endothelial Cell-Specific Materials

Coronary artery stents are life-saving devices, and millions of these devices are implanted annually to treat coronary heart disease. The current gold standard in treatment is drug-eluting stents, which are coated with a biodegradable polymer layer that elutes antiproliferative drugs to prevent restenosis due to neointimal hyperplasia. Stenting is commonly paired with systemic antiplatelet therapy to prevent stent thrombosis. Despite their clinical success, current stents have significant limitations including inducing local inflammation that drives hyperplasia; a lack of hemocompatibility that promotes thrombosis, increasing need for antiplatelet therapy; and limited endothelialization, which is a critical step in the healing process. In this research, we designed a novel material for use as a next-generation coating for drug-eluting stents that addresses the limitations described above. Specifically, we developed a recombinant spider silk material that is functionalized with an REDV cell-adhesive ligand, a peptide motif that promotes specific adhesion of endothelial cells in the cardiovascular environment. We illustrated that this REDV-modified spider silk variant [eADF4(C16)-REDV] is an endothelial-cell-specific material that can promote the formation of a near-confluent endothelium. We additionally performed hemocompatibility assays using human whole blood and demonstrated that spider silk materials exhibit excellent hemocompatibility under both static and flow conditions. Furthermore, we showed that the material displayed slow enzyme-mediated degradation. Finally, we illustrated the ability to load and release the clinically relevant drug everolimus from recombinant spider silk coatings in a quantity and at a rate similar to that of commercial devices. These results support the use of REDV-functionalized recombinant spider silk as a coating for drug-eluting stents.

Different drugs in drug-eluting stents for peripheral artery disease: a systematic evaluation and Bayesian meta-analysis

Drug-eluting stents (DESs) have become the first-line treatment for symptomatic peripheral arterial disease (PAD). Currently, there are many types of DESs on the market. The same type of DESs has different concentrations, and various drugs in them show uneven efficacy. The selection of DESs remains controversial. This study was aimed at comparing the long-term real-world outcomes of different DESs in the treatment of peripheral arterial occlusive disease (PAOD). The databases including Cochrane Library, Embase, and PubMed were searched with a time frame until March 25, 2023. The primary patency (PP) and target lesion revascularization (TLR) at 6 months were used as the primary endpoints. A total of 32 studies (5467 patients) were eligible. At the six-month follow-up, DES-Evero 1 ug/mm2 ranked first in terms of PP, with a significant difference from BMSs (RR [95% CI] = 1.6). DES-Siro 0.9 ug/mm2, DES-Siro 1.4 ug/mm2, DES-Siro 1.95 ug/mm2, DES-PTX 0.167 ug/mm2, DES-PTX 1 ug/mm2 and covered stents (CSs) showed significantly better PPs than BMSs. In terms of TLR, DES-Siro 0.9 ug/mm2 (0.31) ranked first, and DES-Evero 1 ug/mm2 ranked last. Among the treatment modalities for PAD, different DESs showed overall encouraging results in improving PP and TLR compared with BMSs. DES-Evero 1 ug/mm2 showed the best PP, but it had the highest reintervention rate at 6 months. Sirolimus-eluting stents were not always more effective with higher concentrations of sirolimus. Among various DESs, sirolimus-eluting stents and everolimus-eluting stents were superior to paclitaxel-eluting stents.

Treatment of coronary lesions with a novel crystalline sirolimus-coated balloon

Background

There is mounting data supporting the use of drug-coated balloons (DCB) not only for treatment of in-stent restenosis (ISR), but also in native coronary artery disease. So far, paclitaxel-coated balloons represented the mainstay DCBs. The SeQuent® crystalline sirolimus-coated balloon (SCB) (B.Braun Medical Inc, Germany) represents a novel DCB, which allows a sustained release of the limus-drug. We evaluated its performance in an all-comer cohort, including complex coronary lesions.

Methods

Consecutive patients treated with the SeQuent® SCB were analyzed from the prospective SIROOP registry (NCT04988685). We assessed clinical outcomes, including major adverse cardiovascular events (MACE), target lesion revascularization (TLR), target vessel myocardial infarction (TV-MI) and cardiovascular death. Angiograms and outcomes were independently adjudicated.

Results

From March 2021 to March 2023, we enrolled 126 patients and lesions, of which 100 (79%) treated using a "DCB-only" strategy and 26 (21%) with a hybrid approach (DES + DCB). The mean age was 68 ± 10 years, 48 (38%) patients had an acute coronary syndrome. Regarding lesion characteristics, ISR was treated in 27 (21%), 11 (9%) underwent CTO-PCI and 59 (47%) of the vessels were moderate to severe calcified. Procedural success rate was 100%. At a median follow-up time of 12.7 (IQR 12; 14.2) months, MACE occurred in 5 patients (4.3%). No acute vessel closure was observed.

Conclusions

Our data indicates promising outcomes following treatment with this novel crystalline SCB in an all-comer cohort with complex coronary lesions. These results require further investigation with randomized trials.

Local, Downstream, and Systemic Evaluation after Femoral Artery Angioplasty with Kanshas Drug-Coated Balloons In Vitro and in a Healthy Swine Model

PURPOSE

To evaluate the incidence of distal embolism and local vascular responses after treatment with the Kanshas drug-coated balloon (DCB) in a preclinical model.

MATERIALS AND METHODS

A total of 90 femoral arteries from 35 healthy swine were treated with a single-dose (×1) or triple-dose (×3) Kanshas DCB that applies the Unicoat technology with 3.2 μg/mm2 of paclitaxel. An uncoated Kanshas balloon was used as a control. The arterial wall, downstream skeletal muscle, and nontarget organs (kidneys, lungs, lymph nodes, liver, spleen, and heart) were histologically evaluated. For pharmacokinetic evaluation, a total of 40 healthy swine were treated with ×1 Kanshas DCB, and treated vessels were evaluated ex vivo with high-performance liquid chromatography-mass spectrometry.

RESULTS

Arteries treated with the Kanshas DCB showed mild proteoglycan deposition accompanied by the loss of smooth muscle cells (SMCs). These changes increased in a dose-dependent manner (medial SMC loss at 28 days in the ×1 vs ×3 groups, in depth, 1 (0.75-1.38) vs 2 (1.63-2.44); P = .0008; in circumference, 0.83 (0.67-1) vs 1.5 (1.19-1.81); P = .0071). No evidence of distal embolization in skeletal muscles (0 of 210 histological sections) and nontarget organs (0 of 345 sections) was observed. The pharmacokinetic evaluation showed high paclitaxel concentration in the treated artery (912 ng/mg, peaking at 3 minutes), which remained detectable at up to 180 days (0.04 ng/mg).

CONCLUSIONS

The Kanshas DCB showed a local drug effect in treated arteries up to 180 days with a high concentration of paclitaxel and no histological evidence of distal embolization.

Sulfasalazine induces autophagy inhibiting neointimal hyperplasia following carotid artery injuries in mice

Background: Neointimal hyperplasia (NH) is a crucial pathophysiological feature in vascular transplant and in-stent restenosis. Excessive proliferation and migration of vascular smooth muscle cells (VSMCs) play important roles in neointimal hyperplasia. This study aims to explore the potentialities and mechanism of sulfasalazine (SSZ) in the prevention of restenosis. Methods: Sulfasalazine was encapsulated in nanoparticles made of poly (lactic-co-glycolic acid) (PLGA). In vivo, carotid ligation injury was induced in mice to induce Neointimal hyperplasia, with or without sulfasalazine containing nanoparticles (NP-SSZ) treatment. After 4 weeks, the arteries were collected for histology, immunofluorescence, Western blotting (WB) and qRT-PCR. In vitro, vascular smooth muscle cells were treated with TNF-α to induce cell proliferation and migration, followed by SSZ or vehicle treatment. WB was performed to further explore its mechanism. Results: The ratio of intima to media thickness (I/M) was increased after ligation injury on day 28, while the ratio was significantly reduced in the NP-SSZ treatment group. The dual positive nuclei of Ki-67 and α-SMA were 47.83% ± 9.15%, whereas only 29.83% ± 5.98% in the NP-SSZ-treated group (p < 0.05). Both MMP-2 and MMP-9 were decreased in the NP-SSZ treatment group (p < 0.05, p < 0.05, respectively) compared to the control group. The levels of the targeted inflammatory genes (TNF-α, VCAM-1, ICAM-1, MCP-1) were lower in the NP-SSZ treatment group compared with the control group. In vitro, the proliferating cell nuclear antigen (PCNA) expression was significantly decreased in the SSZ treatment group. The cell viability of VSMCs was markedly increased in the TNF-α treatment group, whereas sulfasalazine treatment inhibited this effect. LC3 II and P62 protein expression were higher in the SSZ group than in the vehicle group both in vitro and in vivo. The phosphorylation of NF-kB (p-NF-kB) and the phosphorylation of mTOR (p-mTOR) were decreased in the TNF-α+ SSZ group, whereas the P62 and LC3 II expression levels were increased. However, the expression level of p-mTOR, P62, and LC3 II was reversed after co-treatment with the agonist of mTOR MHY1485, whereas the p-NF-kB expression level was unchanged. Conclusion: sulfasalazine inhibited vascular smooth muscle cells proliferation and migration in vitro and Neointimal hyperplasia in vivo through NF-kB/mTOR-mediated autophagy.

Current Status and De Novo Synthesis of Anti-Tumor Alkaloids in Nicotiana

Alkaloids are the most diversified nitrogen-containing secondary metabolites, having antioxidant and antimicrobial properties, and are extensively used in pharmaceuticals to treat different types of cancer. Nicotiana serves as a reservoir of anti-cancer alkaloids and is also used as a model plant for the de novo synthesis of various anti-cancer molecules through genetic engineering. Up to 4% of the total dry weight of Nicotiana was found to be composed of alkaloids, where nicotine, nornicotine, anatabine, and anabasine are reported as the dominant alkaloids. Additionally, among the alkaloids present in Nicotiana, β-carboline (Harmane and Norharmane) and Kynurenines are found to show anti-tumor effects, especially in the cases of colon and breast cancers. Creating new or shunting of existing biosynthesis pathways in different species of Nicotiana resulted in de novo or increased synthesis of different anti-tumor molecules or their derivatives or precursors including Taxadiane (~22.5 µg/g), Artemisinin (~120 μg/g), Parthenolide (~2.05 ng/g), Costunolide (~60 ng/g), Etoposide (~1 mg/g), Crocin (~400 µg/g), Catharanthine (~60 ng/g), Tabersonine (~10 ng/g), Strictosidine (~0.23 mg/g), etc. Enriching the precursor pool, especially Dimethylallyl Diphosphate (DMAPP), down-regulating other bi-product pathways, compartmentalization or metabolic shunting, or organelle-specific reconstitution of the precursor pool, might trigger the enhanced accumulation of the targeted anti-cancer alkaloid in Nicotiana.

Comparing a strategy of sirolimus-eluting balloon treatment to drug-eluting stent implantation in de novo coronary lesions in all-comers: Design and rationale of the SELUTION DeNovo Trial

BACKGROUND

Drug eluting stents (DES) are associated with a 2% to 4% annual rate of target lesion failure through 5-to-10-year follow-up. The presence of a metallic protheses is a trigger for neo-atherosclerosis and very late stent thrombosis. A "leave nothing behind" strategy using Drug Coated Balloons has been suggested; however, paclitaxel coated balloons are only recommended in selected indications. Recently a novel sirolimus eluting balloon, the SELUTION SLR ^TM 014 PTCA balloon (SEB) (M.A. MedAlliance SA, Nyon, Switzerland) has been developed.

HYPOTHESIS

A strategy of percutaneous coronary intervention (PCI) with SEB and provisional DES is non-inferior to a strategy of systematic DES on target vessel failure (TVF) at one and five years. If non-inferiority is met at 5 years, superiority will be tested.

DESIGN

SELUTION DeNovo is a multi-center international open-label randomized trial. Subjects meeting eligibility criteria are randomized 1:1 to treatment of all lesions with either SEB and provisional DES or systematic DES. Major inclusion criteria are PCI indicated for ≥1 lesion considered suitable for treatment by either SEB or DES and clinical presentation with chronic coronary syndrome, unstable angina or non-ST segment elevation myocardial infarction (NSTEMI). There is no limitation in the number of lesions to be treated. Target lesions diameters are between 2 and 5 mm. Major exclusion criteria are lesions in the left main artery, chronic total occlusions, ST segment elevation myocardial infarction and unstable non-ST segment elevation myocardial infarction. Three thousand three hundred twenty six patients will be included in 50 sites in Europe and Asia. TVF rates and their components will be determined at 30 days, 6 months and annually up to 5 years post-intervention. Among secondary endpoints, bleeding events, cost-effectiveness data and net clinical benefits will be assessed.

SUMMARY

SELUTION DeNovo trial is an open-label, multi-center international randomized trial comparing a strategy of PCI with SEB and provisional DES to a strategy of PCI with systematic DES on TVF at one and five years. Non-inferiority will be tested at one and five years. If non-inferiority is met at five years, superiority will be tested.

Global research trends in in-stent neoatherosclerosis: A CiteSpace-based visual analysis

BACKGROUND

Recent studies have shown that in-stent neoatherosclerosis (ISNA/NA) is an important cause of late stent failure. A comprehensive understanding of the current state of research in this field will facilitate the analysis of its development trends and hot frontiers. However, no bibliometric correlation has been reported yet. Here, we analyze the relevant literature since the emergence of the concept and provide valuable insights.

METHODS

Publications were collected from the Web of Science Core Collection (WoSCC) and PubMed. Microsoft Excel, SPSS and CiteSpace were used to analyze and present the data.

RESULTS

A total of 498 articles were collected, with Japan and Cardiovasc Res Fdn being the main publishing forces in all country/region and institutions. J AM COLL CARDIOL is the journal with the most published and co-cited articles. According to co-citation analysis, optical coherence tomography, thrombosis, implantation, restenosis, drug-eluting stent, and bare metal stent have become more and more popular recently.

CONCLUSION

ISNA is a niche and emerging field. How to reduce the incidence of ISNA and improve the late patency rate of coronary stents may remain a hot spot for future research. The pathogenesis of ISNA also needs to be explored in more depth.

Effect of expanded polytetrafluoroethylene thickness on paclitaxel release and edge stenosis in stent graft

Stent grafts have been widely used to treat lower extremity arterial stenosis or occlusion. However, there are major issues with edge stenosis and loss of patency over time. Paclitaxel-coated stent grafts have been proven to be effective in preventing edge stenosis, but the insufficient amounts of paclitaxel released may limit the effectiveness of drug-eluting stent grafts. In this study, we examined whether paclitaxel-coated expanded polytetrafluoroethylene (ePTFE) stent graft thickness influences paclitaxel release properties and inhibits edge stenosis. Low-, medium-, and high-thickness paclitaxel-coated stent grafts were prepared by varying the thickness of inner and outer ePTFE layers. Surface morphologies of the stent grafts were analyzed using a scanning electron microscope. The stent grafts were then implanted in the iliac arteries of 20 healthy swine. Twelve pigs were used to assess edge stenosis, and digital subtraction angiography was performed at day 30 (n = 4), 90 (n = 4), and 180 (n = 4). Histological evaluation of the treated arteries was also performed. Eight pigs were used for pharmacokinetic analysis, and the treated arteries were obtained at day 1 (n = 2), 30 (n = 2), 90 (n = 2) and 180 (n = 2). Scanning electron microscopy confirmed that the mean pore size of the stent grafts decreased with increasing thickness. The results of angiographic and histological evaluation demonstrated that low-thickness ePTFE-stent grafts resulted in edge stenosis and apparent intimal hyperplasia at 180 days, whereas for medium-thickness ePTFE-stent grafts, no obvious edge stenosis and intimal hyperplasia was noted in the similar time period. The results of pharmacokinetic evaluation showed that at 180 days, the paclitaxel concentration of treated arteries of the medium group was 36 ± 53 ng/g, while concentrations in the low group was not detectable. Stent grafts with increased ePTFE thickness appear to allow for more delayed release of paclitaxel compared to low-thickness ePTFEs.

Functional analysis of arteriovenous fistulae in non-contrast magnetic resonance images

BACKGROUND AND OBJECTIVE

Arteriovenous fistulae (AVF) are the preferred mode of hemodialysis vascular access and their successful maturation is critical to reduce patient morbidity, mortality, cost, and improve quality of life. Peri-anastomotic venous segment stenosis is the primary cause of AVF maturation failure. The objective is to develop a software protocol for the functional analysis of arteriovenous fistula.

METHOD

We have developed a standard protocol for the anatomical analysis of the AVF to better understand the mechanisms involved in AVF stenosis and to identify future imaging biomarkers for AVF success or failure using non-contrast magnetic resonance imaging (MRI). The 3D model of the AVF is created using a polar dynamic programming technique. Analysis has been performed on six Yorkshire cross domestic swine, but techniques can be applied into clinical settings.

RESULTS

Differences in AVF angles and vein curvature are associated with significant variability of venous cross-sectional area. This suggests that the pattern of stenosis is likely to be dependent upon hemodynamic profiles which are largely determined by AVF anatomical features and could play an important role in AVF maturation.

CONCLUSIONS

This protocol enables us to visualize and study the hemodynamic profiles indirectly allowing early stratification of patients into high and low risk groups for AVF maturation failure. High risk patients could then be targeted with an enhanced process of care or future maturation enhancing therapies resulting in a much-needed precision-medicine approach to dialysis vascular access.

Prophylactic paclitaxel-eluting stent placement does not improve covered femoropopliteal stent patency

OBJECTIVE

Covered stents are an important tool in managing femoropopliteal peripheral arterial disease. However, their performance is impaired by edge neointimal hyperplasia and restenosis. We examined the effectiveness of prophylactic deployment of paclitaxel-eluting stents to prevent edge restenosis.

METHODS

A retrospective case-control study was performed. Patients with femoropopliteal peripheral arterial disease who were treated with Viabahn stent placement were compared to patients treated with Viabahn stents deployed in conjunction with paclitaxel-eluting stents (PTX). The primary outcome was time to loss of stent primary patency. The Kaplan-Meier method was used.

RESULTS

A total of 36 Viabahn and 25 Viabahn + paclitaxel-eluting stent procedures were evaluated, with mean follow-up periods of 27 and 18 months, respectively. The Viabahn + paclitaxel-eluting stent group had a longer length of vessel stented (P = .0023). Twelve-month primary patency was 74% in the Viabahn group and 75% in the Viabahn + paclitaxel-eluting stent group. Pre-existing dyslipidemia correlated with earlier loss of primary patency across the combined cohort (P = .0193).

CONCLUSION

Viabahn stent primary patency is unaffected by the addition of paclitaxel-eluting stents.

Inhibition of edge stenosis of endografts in swine iliac arteries by a novel endograft with biodegradable coating at both ends

Objective

This study evaluated the effectiveness and safety of a novel endograft with a biodegradable coating at both ends in preventing edge stenosis in swine iliac arteries. The biodegradable coating was composed of polylactide and paclitaxel.

Methods

Four types of endograft were implanted in the iliac arteries of healthy swine: an endograft without coating (control group) and endografts with polylactide and paclitaxel coating containing 0.1, 0.3, or 3.6 μg/mm² of paclitaxel. The edge stenosis of these endografts in swine iliac arteries was assessed using angiographic image data at 30, 90, and 180 days after the operation. After terminal angiography, histologic evaluation of the treated arteries was performed. The treated sections of iliac arteries and blood samples were obtained at 1, 7, 30, 90, and 180 days for pharmacokinetic analysis.

Results

The results of angiographic and histologic evaluation demonstrated that intimal hyperplasia contributed to edge stenosis and polylactide-paclitaxel coating effectively inhibited edge stenosis. At 30 days, edge stenosis was observed at both the proximal and distal edges of the endograft without coating. At 90 days, edge stenosis was detected for the endograft coated with 0.1 μg/mm² paclitaxel, and ectasia dilation occurred at the proximal and distal edges of the endograft coated with 3.6 μg/mm² paclitaxel. No edge stenosis or other adverse effects were observed at 90 and 180 days for the endograft coated with 0.3 μg/mm² paclitaxel. In addition, for the endograft coated with 0.3 μg/mm² paclitaxel, a pharmacokinetic analysis showed that the paclitaxel concentration of treated segments decreased from 14 264 ± 1020 ng/g at day 1 to 80 ± 70 ng/g at day 90, and 20 ± 40 ng/g at day 180. The plasma paclitaxel concentration was low at day 1 and no longer detected after 7 days.

Conclusions

Polylactide and paclitaxel coating containing 0.3 μg/mm² paclitaxel at both ends of endografts effectively and safely inhibits edge stenosis in swine iliac arteries.

Highly flexible and porous silk fibroin microneedle wraps for perivascular drug delivery

Various perivascular drug delivery techniques have been demonstrated for localized post-treatment of intimal hyperplasia: a vascular inflammatory response caused by endothelial damages. Although most perivascular devices have focused on controlling the delivery duration of anti-proliferation drug, the confined and unidirectional delivery of the drug to the target tissue has become increasingly important. In addition, careful attention should also be paid to the luminal stability and the adequate exchange of vascular protein or cell between the blood vessel and extravascular tissue to avoid any side effect from the long-term application of any perivascular device. Here, a highly flexible and porous silk fibroin microneedle wrap (Silk MN wrap) is proposed to directly inject antiproliferative drug to the anastomosis sites while ensuring sufficient vascular exchanges. Drug-embedded silk MNs were transfer-molded on a highly flexible and porous silk wrap. The enhanced cell compatibility, molecular permeability, and flexibility of silk MN wrap guaranteed the structural integrity of blood vessels. Silk wrap successfully supported the silk MNs and induced multiple MN penetration to the target tissue. Over 28 days, silk MN wrap significantly inhibited intimal hyperplasia with a 62.1% reduction in neointimal formation.

Drug Coated Balloons for Dysfunctional Haemodialysis Venous Access: A Patient Level Meta-Analysis of Randomised Controlled Trials

OBJECTIVE

To perform an individual patient data level meta-analysis of randomised controlled trials comparing drug coated balloon angioplasty (DCB) against conventional percutaneous transluminal angioplasty (PTA) in the treatment of dysfunctional haemodialysis venous access.

METHODS

A search was conducted from inception to 13 November 2020. Kaplan-Meier curves comparing DCB with PTA by target lesion primary patency (TLPP) and access circuit primary patency (ACPP) were graphically reconstructed to retrieve patient level data. One stage meta-analyses with Cox models with random effects shared frailties were conducted to determine hazard ratios (HRs). Dynamic restricted mean survival times (RMST) were conducted in view of violation of the proportional hazards assumption. Conventional two stage meta-analyses and network meta-analyses under random effects Frequentist models were conducted to determine overall and comparative outcomes of paclitaxel concentrations used. Where outliers were consistently detected through outlier and influence analyses, sensitivity analyses excluding those studies were conducted.

RESULTS

Among 10 RCTs (1 207 patients), HRs across all models favoured DCB (one stage shared frailty HR 0.62, 95% CI 0.53 - 0.73, p < .001; two stage random effects HR 0.60, 95% CI 0.42 - 0.86, p = .018, I² = 65%) for TLPP. Evidence of time varying effects (p = .005) was found. TLPP RMST was + 3.54 months (25.0%) longer in DCB treated patients compared with PTA (p = .001) at three years. TLPP at six months, one year, and two years was 75.3% vs. 58.1%, 51.1% vs. 37.1%, and 31.4% vs. 26.0% for DCB and PTA, respectively. The P-Scores within the Frequentist network meta-analysis suggest that higher concentrations of paclitaxel were associated with better TLPP and ACPP. Among six RCTs (854 patients), the one stage model favoured DCB (shared frailty HR 0.72, 95% CI 0.60 - 0.87, p < .001) for ACPP. Conversely, the two stage random effects model demonstrated no significant difference (HR 0.76, 95% CI 0.35 - 1.67, p = .41, I² = 81%). Sensitivity analysis excluding outliers significantly favoured DCB (HR 0.61, 95% CI 0.41 - 0.91, p = .027, I² = 62%).

CONCLUSION

Overall evidence suggests that DCB is favoured over PTA in TLPP and ACPP.

Optical coherence tomography analysis of late lumen enlargement after paclitaxel-coated balloon angioplasty for de-novo coronary artery disease

BACKGROUND

Paclitaxel-coated balloon angioplasty for de-novo coronary artery lesions causes late lumen enlargement (LLE), however, the mechanisms and predictors of LLE have not been elucidated.

METHODS AND RESULTS

We retrospectively analyzed 91 consecutive patients with 95 de-novo coronary lesions, who underwent paclitaxel-coated balloon angioplasty without stenting from August 2018 to July 2019 as well as follow-up coronary angiography and optical coherence tomography (OCT). The mean follow-up duration was 8.2 ± 2.9 months. The target lesion revascularization rate was 7.3%. OCT demonstrated LLE in 50.5% of lesions. The lesions with LLE had a higher incidence of vessel enlargement (76.6 vs. 29.2%, p < .01), regression of plaque or dissection flap (55.3 vs. 10.4%, p < 0.01; 40.4 vs. 14.6%, p < .01, respectively), and reattachment and healing of dissection flaps (74.5 vs. 27.1%, p < .01) compared with those without LLE. Preprocedure thick-cap fibroatheroma plaques and postprocedure deep dissection reaching the tunica media were positive predictors of LLE (hazard ratio, HR 3.74 [1.93-7.25], p < .001; HR 2.04 [1.02-4.05], p < .05, respectively).

CONCLUSIONS

OCT analysis after paclitaxel-coated balloon treatment of de-novo coronary artery lesions revealed that the mechanism of LLE was associated with vessel enlargement, healing of dissection flaps, and regression of plaque or dissection flap. Preprocedure thick-cap fibroatheroma plaques and postprocedure deep dissection reaching the tunica media on OCT were predictors of LLE.

Critical evaluation of stents in coronary angioplasty: a systematic review

BACKGROUND

Coronary stents are routinely placed in the treatment and prophylaxis of coronary artery disease (CAD). Current coronary stent designs are prone to developing blockages: in-stent thrombosis (IST) and in-stent re-stenosis (ISR). This is a systematic review of the design of current coronary stent models, their structural properties and their modes of application, with a focus on their associated risks of IST and ISR. The primary aim of this review is to identify the best stent design features for reducing the risk of IST and ISR. To review the three major types of stents used in clinical settings today, determining best and relevant clinical practice by exploring which types and features of offer improved patient outcomes regarding coronary angioplasty. This information can potentially be used to increase the success rate of coronary angioplasty and stent technology in the future taking into account costs and benefits.

METHODS

Scientific databases were searched to find studies concerning stents. After the exclusion criteria were applied, 19 of the 3192 searched literature were included in this review. Studies investigating three major types of stent design were found: bare-metal stents (BMS), drug-eluting stents (DES) and bioresorbable stents (BRS). The number of participants varied between 14 and 1264. On average 77.4% were male, with a mean age of 64 years.

RESULTS

From the findings of these studies, it is clear that DES are superior in reducing the risk of ISR when compared to BMS. Conflicting results do not clarify whether BRS are superior to DES at reducing IST occurrence, although studies into newer BRS technologies show reducing events of IST to 0, creating a promising future for BRS showing them to be non-inferior. Thinner stents were shown to reduce IST rates, due to better re-endothelialisation. Scaffold material has also been shown to play a role with cobalt alloy stents reducing the risk of IST. This study found that thinner stents that release drugs were better at preventing re-blockages. Some dissolvable stents might be better at stopping blood clots blocking the arteries when compared to metal stents. The method and procedure of implanting the stent during coronary angioplasty influences success rate of these stents, meaning stent design is not the only significant factor to consider.

CONCLUSIONS

Positive developments in coronary angioplasty could be made by designing new stents that encompass all the most desirable properties of existing stent technology. Further work is needed to investigate the benefits of BRS in reducing the risk of IST compared to DES, as well as to investigate the effects of different scaffold materials on IST and ISR outcomes.

Influence of Elongation of Paclitaxel-Eluting Electrospun-Produced Stent Coating on Paclitaxel Release and Transport through the Arterial Wall after Stenting

It was previously shown that polycaprolactone (PCL)-based electrospun-produced paclitaxel (PTX)-enriched matrices exhibit long-term drug release kinetics and can be used as coatings for drug-eluting stents (DES). The installation of vascular stents involves a twofold increase in stent diameter and, therefore, an elongation of the matrices covering the stents, as well as the arterial wall in a stented area. We studied the influence of matrix elongation on its structure and PTX release using three different electrospun-produced matrices. The data obtained demonstrate that matrix elongation during stent installation does not lead to fiber breaks and does not interfere with the kinetics of PTX release. To study PTX diffusion through the expanded artery wall, stents coated with 5%PCL/10%HSA/3%DMSO/PTX and containing tritium-labeled PTX were installed into the freshly obtained iliac artery of a rabbit. The PTX passing through the artery wall was quantified using a scintillator β-counter. The artery retained the PTX and decreased its release from the coating. The retention of PTX by the arterial wall was more efficient when incubated in blood plasma in comparison with PBS. The retention/accumulation of PTX by the arterial wall provides a prolonged drug release and allows for the reduction in the dose of the drugs in electrospun-produced stent coatings.

Paclitaxel- and Sirolimus-coated Balloons in Peripheral Artery Disease Treatment: Current Perspectives and Concerns

Drug-coated balloons (DCBs) have become an established therapy for the treatment of above-the-knee peripheral artery disease. The paclitaxel DCB has shown clinical benefit in terms of patency and freedom from re-intervention in multiple randomised trials. However, a recent meta-analysis has suggested an association between mortality and the use of paclitaxel-coated devices. Sirolimus is another potential choice of anti-proliferative agent for use in DCBs because of its wider therapeutic index and lower risk for dose-dependent toxicity. More recently, encapsulating sirolimus in micro-reservoirs or polymers has facilitated the development of effective sirolimus DCBs, some of which are available in Europe and Asia. In this review, the authors focus on paclitaxel and sirolimus DCB technologies from the standpoint of drug characteristics and clinical trials.

Drug-Loaded, Polyurethane Coated Nitinol Stents for the Controlled Release of Docetaxel for the Treatment of Oesophageal Cancer

For several decades, self-expanding metal stents (SEMSs) have shown significant clinical success in the palliation of obstructive metastatic oesophageal cancer. However, these conventional oesophageal stents can suffer from stent blockage caused by malignant tumour cell growth. To overcome this challenge, there is growing interest in drug-releasing stents that, in addition to palliation, provide a sustained and localized release of anticancer drugs to minimise tumour growth. Therefore, in this study we prepared and evaluated an oesophageal stent-based drug delivery platform to provide the sustained release of docetaxel (DTX) for the treatment of oesophageal cancer-related obstructions. The DTX-loaded oesophageal stents were fabricated via dip-coating of bare nitinol stents with DTX-polyurethane (PU) solutions to provide PU coated stents with DTX loadings of 1.92 and 2.79% w/w. Mechanical testing of the DTX-PU coated stents revealed that an increase in the drug loading resulted in a reduction in the ultimate tensile strength, toughness and Young’s modulus. In vitro release studies showed a sustained release of DTX, with ~80–90% released over a period of 33 days. While the DTX-loaded stents exhibited good stability to gamma radiation sterilisation, UV sterilisation or accelerated storage at elevated temperatures (40 °C) resulted in significant DTX degradation. Cell proliferation, apoptosis and Western blotting assays revealed that the DTX released from the stents had comparable anticancer activity to pure DTX against oesophageal cancer cells (KYSE-30). This research demonstrates that the dip-coating technique can be considered as a promising approach for the fabrication of drug-eluting stents (DESs) for oesophageal cancer treatment.

Vascular Response of a Polymer-Free Paclitaxel-Coated Stent (Zilver PTX) versus a Polymer-Coated Paclitaxel-Eluting Stent (Eluvia) in Healthy Swine Femoropopliteal Arteries

PURPOSE

To compare the long-term vascular healing responses of healthy swine iliofemoral arteries treated with a polymer-free paclitaxel-eluting stent (Z-PES, Zilver PTX) or a fluoropolymer-based paclitaxel-eluting stent (FP-PES, Eluvia).

MATERIALS AND METHODS

Bilateral iliofemoral arteries in 20 swine were treated with a Z-PES (n = 16) or a FP-PES (n = 24) and were examined histologically at 1, 3, 6, and 12 months.

RESULTS

Morphometric analysis revealed larger external and internal elastic lamina, stent expansion, and lumen area in the FP-PES than in the Z-PES at all timepoints. Luminal narrowing was similar in the 2 groups at 1 month; however, greater stenosis was observed in the Z-PES group at 3 months, with significant regression thereafter, resulting in equivalent stenosis at 6 and 12 months. Greater drug effect and less complete vessel healing were found in the FP-PES group at all timepoints, including greater numbers of malapposed struts with excessive fibrin deposition at 1 and 3 months, than in the Z-PES group. Three of 12 FP-PESs from the 6- and 12-month cohorts also showed circumferential medial disruption with peri-strut inflammation, whereas no abnormal findings were observed in contralateral Z-PESs.

CONCLUSIONS

Prolonged paclitaxel release with the presence of a permanent polymer may contribute to the differential vascular responses seen for the Z-PES and FP-PES groups, including medial layer disruption and aneurysmal vessel degeneration that was sometimes observed in the FP-PES group. These distinct features should be confirmed by pathology and in vivo imaging of human superficial femoral arteries to determine their clinical significance.

Efficacy and Safety of Paclitaxel-Coated Balloon Angioplasty for Dysfunctional Arteriovenous Fistulas: A Multicenter Randomized Controlled Trial

RATIONALE & OBJECTIVE

Previous studies have illustrated the potential superiority of drug-coated balloons (DCBs) in maintaining patency after initial angioplasty for arteriovenous fistula (AVF) dysfunction due to stenosis. Our trial evaluated the efficacy and safety of DCBs for preventing fistula restenosis in Chinese hemodialysis patients.

STUDY DESIGN

Multicenter, prospective, randomized, open-label, blinded end point, controlled trial.

SETTINGS & PARTICIPANTS

A total of 161 hemodialysis patients with fistula dysfunction from 10 centers in China.

INTERVENTION

Participants were randomized 1:1 to treatment with initial dilation followed by DCB angioplasty or conventional high-pressure balloon (HPB) angioplasty.

OUTCOMES

The primary end point was target lesion primary patency defined as the target lesion intervention-free survival in conjunction with an ultrasonography-measured peak systolic velocity ratio (PSVR) ≤2.0 at 6 months. The secondary end points included 1) device, technical, clinical, and procedural success; 2) major adverse events; 3) degree of target lesion stenosis at 6 months; and 4) clinically driven target lesion and target shunt revascularization within 12 months.

RESULTS

The percentage with target lesion primary patency as defined by a PSVR ≤2.0 was higher in the DCB group than in the control group (65% vs 37%, respectively; rate difference, 28% [95% CI, 13%-43%]; P <0.001) at 6 months. The target lesion and target shunt intervention-free survival of the DCB group were not superior to those of the control group at 6 months (P = 0.3 and P = 0.2, respectively) but were superior at 12 months (target lesion intervention-free survival: 73% for DCB vs 58% for control [P = 0.04]; target shunt intervention-free survival: 73% for DCB vs 57% for control [P = 0.04]). The average degree of target lesion stenoses at 6 months was not significantly different between the 2 groups (44% ± 16% for DCB vs 49% ± 18% for control; P = 0.09). There were no significant differences in major adverse events or in device, technical, clinical, or procedural success rates between the groups.

LIMITATIONS

Small sample size; short follow-up period; procedural differences between the 2 groups such as unequal inflation times and balloon lengths.

CONCLUSIONS

Compared to conventional HPB angioplasty, DCB treatment achieved superior primary patency defined using PSVR measured at 6 months and superior intervention-free survival of both the target lesion and the target shunt at 12 months without evidence of greater adverse events.

FUNDING

Funded by ZhuHai Cardionovum Medical Device Co., Ltd.

TRIAL REGISTRATION

Registered at ClinicalTrials.gov with study number NCT02962141.

Comparative Analysis of the Paclitaxel-Eluting Peripheral Igaki-Tamai Stent and the Drug-Free Igaki-Tamai Stent Using Optical Coherence Tomography and Histological Analysis in a Porcine Iliac Artery Model

BACKGROUND

The combination of a bioresorbable scaffold and antiproliferative drugs is a promising treatment for peripheral artery disease. The novel paclitaxel-eluting peripheral Igaki-Tamai stent (PTX-ITS) has the same backbone design as the drug-free peripheral Igaki-Tamai stent and a paclitaxel coating. Arterial responses to the PTX-ITS and ITS using optical coherence tomography (OCT) and histological analysis in a porcine iliac artery model were compared.

METHODS AND RESULTS

In total, 6 PTX-ITSs and 6 ITSs implanted in porcine iliac arteries were evaluated. Quantitative measurements of the scaffold, lumen, neointimal areas, and percent area stenosis were performed using OCT at 1 and 3 months. Histological evaluations (PTX-ITS [n=5], ITS [n=4]) were performed following euthanasia at 3 months. Injury, inflammation, endothelialization, and fibrin scores were measured. Baseline angiographic characteristics were similar in both groups. The ITS group showed significantly smaller scaffold areas than the PTX-ITS group at 1 month (18.50±3.62 mm2vs. 23.54±3.64 mm2; P=0.037) and 3 months (15.82±2.57 mm2vs. 21.67±3.57 mm2; P=0.009). Percent area stenosis was significantly lower in the PTX-ITS group at 3 months (28.70±7.24% vs. 40.36±7.07%; P=0.018). Histological evaluations revealed similar low-grade inflammatory reactions for both scaffolds.

CONCLUSIONS

PTX-ITSs showed significantly better suppression of late scaffold shrinkage and lower in-scaffold stenosis for up to 3 months. Additionally, PTX-ITSs exhibited high biocompatibility, which is comparable to ITSs.

Recent Advances in Manufacturing Innovative Stents

Cardiovascular diseases are the most distributed cause of death worldwide. Stenting of arteries as a percutaneous transluminal angioplasty procedure became a promising minimally invasive therapy based on re-opening narrowed arteries by stent insertion. In order to improve and optimize this method, many research groups are focusing on designing new or improving existent stents. Since the beginning of the stent development in 1986, starting with bare-metal stents (BMS), these devices have been continuously enhanced by applying new materials, developing stent coatings based on inorganic and organic compounds including drugs, nanoparticles or biological components such as genes and cells, as well as adapting stent designs with different fabrication technologies. Drug eluting stents (DES) have been developed to overcome the main shortcomings of BMS or coated stents. Coatings are mainly applied to control biocompatibility, degradation rate, protein adsorption, and allow adequate endothelialization in order to ensure better clinical outcome of BMS, reducing restenosis and thrombosis. As coating materials (i) organic polymers: polyurethanes, poly(ε-caprolactone), styrene-b-isobutylene-b-styrene, polyhydroxybutyrates, poly(lactide-co-glycolide), and phosphoryl choline; (ii) biological components: vascular endothelial growth factor (VEGF) and anti-CD34 antibody and (iii) inorganic coatings: noble metals, wide class of oxides, nitrides, silicide and carbide, hydroxyapatite, diamond-like carbon, and others are used. DES were developed to reduce the tissue hyperplasia and in-stent restenosis utilizing antiproliferative substances like paclitaxel, limus (siro-, zotaro-, evero-, bio-, amphi-, tacro-limus), ABT-578, tyrphostin AGL-2043, genes, etc. The innovative solutions aim at overcoming the main limitations of the stent technology, such as in-stent restenosis and stent thrombosis, while maintaining the prime requirements on biocompatibility, biodegradability, and mechanical behavior. This paper provides an overview of the existing stent types, their functionality, materials, and manufacturing conditions demonstrating the still huge potential for the development of promising stent solutions.

A retrospective comparison analysis of results of drug-coated balloon versus plain balloon angioplasty in treatment of juxta-anastomotic de novo stenosis of radiocephalic arteriovenous fistulas

BACKGROUND

Juxta-anastomotic stenosis is a common issue of arteriovenous fistulas. We aimed to evaluate the results of percutaneous transluminal angioplasty with drug-coated balloon versus plain balloon for the treatment of juxta-anastomotic stenoses of mature but failing distal radiocephalic arteriovenous fistulas.

METHODS

A total of 80 patients with a juxta-anastomotic stenosis of distal radiocephalic arteriovenous fistula in our clinic between January 2016 and September 2017 were retrospectively analyzed. Patients were divided into two groups according to the type of treatment as drug-coated balloon - percutaneous transluminal angioplasty (n = 44) and plain balloon - percutaneous transluminal angioplasty (n = 43). Intra- and post-procedural data were recorded. Target lesion primary patency rate was evaluated at 6 and 12 months. Of all patients, 48 were females and 39 were males with a mean age of 56.3 ± 10.4 (range, 24-75) years. Both groups had mature fistulas, and the mean age of fistula was 11.3 ± 9.1 months in the drug-coated balloon - percutaneous transluminal angioplasty group and 10.3 ± 8.8 months in the plain balloon - percutaneous transluminal angioplasty group (p = 0.24).

RESULTS

There was no significant difference in the target lesion stenosis rate and the median lesion length between the groups. Technical and clinical success were achieved in both groups. Target lesion primary patency was similar at 6 months between the two groups (93.1% vs 81.3%, respectively; p = 0.14) but significantly higher for the drug-coated balloon - percutaneous transluminal angioplasty group at 12 months (81.8% vs 51.1%, respectively; p = 0.01).

CONCLUSION

Our study results suggest that the use of drug-coated balloon combined with percutaneous transluminal angioplasty is an effective treatment for juxta-anastomotic stenoses of mature but failing distal radiocephalic arteriovenous fistulas with significantly improved target lesion primary patency rates and reduced need for juxta-anastomotic reinterventions.

Provisional Stenting Using the Zilver PTX Drug-Eluting Stent After Drug-Coated Balloon Angioplasty: Initial Experience From the Double Drug Dose "3D" Study

Purpose: To explore the provisional use of a drug-eluting stent (DES) after suboptimal drug-coated balloon (DCB) angioplasty in complex, calcified femoropopliteal lesions. Materials and Methods: A prospective, single-center, investigator-initiated pilot study enrolled 15 patients (mean age 71.3 years; 9 men) with symptomatic stenosis (n=6) or occlusion (n=9) of the native superficial femoral and/or proximal popliteal arteries who experienced suboptimal DCB dilation despite postdilation. Lesion characteristics were evaluated with computed tomography angiography and duplex ultrasound confirmed by intravascular ultrasound. Follow-up included clinical and imaging evaluations as well as blood tests to monitor inflammatory markers. Endpoints included systemic inflammation, acute/chronic thrombosis, aneurysm formation, and mortality. Results: Provisional stenting was required for residual stenosis >50% in 4 cases and flow-limiting dissection in 11. Provisional spot stenting was done using the Zilver PTX DES. Clinical improvement was observed in all cases. After 24-month follow-up all patients were alive and in good clinical condition. One- and 2-year primary patency rates were 93.3% and 92.9%, respectively; secondary patency was 100%. Restenosis required reintervention in 2 cases. No local or systemic complications or toxicity were observed due to the use of a double dose of paclitaxel. No significant increase in any inflammation marker was observed in the perioperative period, and no aneurysm formation was seen over 24 months of follow-up. Conclusion: Combined DCB plus DES therapy seems to be safe and correlated with high primary patency following suboptimal angioplasty. Larger studies are required to confirm the safety and efficacy of this approach.

Comparison of drug-coated balloon angioplasty versus conventional angioplasty for arteriovenous fistula stenosis: Systematic review and meta-analysis

BACKGROUND

Arteriovenous fistula is the most preferred form of vascular access, but stenosis treated by balloon angioplasty is prone to restenosis. Multiple trials have been published with regard to the use of paclitaxel-coated balloon to prolong lesion patency compared to conventional balloon. Although paclitaxel-coated balloon has theoretical appeal, its use has not been widespread nationwide due to cost and lack of large-scale multicenter studies. We performed this meta-analysis to evaluate whether paclitaxel-coated balloon outperforms conventional balloon to prolong target lesion patency.

METHODS

PubMed/Medline, Clinical Trials.gov, EMBASE, Scopus, Web of Science, and Cochrane Central were searched from inception through April 2019 for studies that investigated the use of paclitaxel-coated balloon in arteriovenous fistula.

RESULTS

Ten studies were included in the final meta-analysis: six studies were randomized controlled trials and four studies were cohort studies. There were 911 participants with a mean age of 64.78 (±5.96) years, and 61.89% were male. Outcome of interest was target lesion primary patency, recorded at 1, 3, 6, 7, 12, and 24 months. Meta-analysis of randomized controlled trials shows that paclitaxel-coated balloons did not statistically improve target lesion primary patency compared to conventional balloons at months 1 (odds ratio = 1.54, p = 0.6373), 3 (odds ratio = 0.57, p = 0.0575), 6 (odds ratio = 0.65, p = 0.3644), 7 (odds ratio = 0.63, p = 0.0582), 12 (odds ratio = 0.64, p = 0.0612), and 24 (odds ratio = 0.43, p = 0.3452). Effect of paclitaxel-coated balloons was statistically significant for cohort studies at months 6 (odds ratio = 0.26, p = 0.0007), 12 (odds ratio = 0.21, p = 0.0001), and 24 (odds ratio = 0.23, p = 0.01).

CONCLUSION

Paclitaxel-coated balloon showed no statistically significant improvement over conventional balloons in decreasing fistula stenosis in randomized controlled trial but were significant for cohort studies.

MMP-sensitive PEG hydrogel modified with RGD promotes bFGF, VEGF and EPC-mediated angiogenesis

Traumatic soft tissue defects such as bedsores, chronic skin ulcers, limb necrosis, osteonecrosis and other ischemic orthopedic diseases are the most clinically intractable and common problems in orthopedics due to unsatisfactory conventional treatments. The present study designed poly(ethylene glycol; PEG) hydrogels with covalently binded arginylglycylaspartic acid (RGD). Endothelial progenitor cells (EPCs) were encapsulated in the modified hydrogel along with vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (bFGF). Results demonstrated that the modified hydrogel displayed good mechanical properties appropriate for a sustained release carrier. RGD modification significantly promoted EPC biocompatibility. VEGF and bFGF encapsulation enhanced the adhesion of EPCs, promoted the production of extracellular matrix and facilitated EPC proliferation. In addition, bFGF and VEGF induced angiogenesis. The combination of growth factors and EPCs in the hydrogel displayed a strong synergy to improve biocompatibility. The present results provided a potential novel treatment approach for soft tissue defects such as bone exposure, chronic skin ulcers, bedsores, limb necrosis, osteonecrosis and other ischemic diseases.

Current concepts regarding drug dosing for peripheral stents

Drug-eluting stent (DES) are the mainstay therapy for the treatment of coronary artery disease. Stent design and drug-elution strategies have evolved over the years leading to the last generation DES which shows optimal safety and efficacy outcome. Peripheral arteries have different mechanical and biological features and the lessons learned from the coronary field have been difficult to introduce into the development of peripheral vascular technologies. First, due to its complex biomechanical behavior the use of metallic stents is limited in some vascular segments (i.e., distal superficial fermoral artery [SFA]). Also, peripheral vascular atherosclerosis is different containing higher levels of plaque burden and calcium. Finally, peripheral arterial disease tends to be more aggressive including longer lesions and higher incidence of total chronic occlusion. In general terms, restenosis in the peripheral vascular territory is more aggressive and occurs at a later time (~12 months) requiring a different pharmacokinetic profile compared to coronary technologies. Several strategies have been evaluated in the peripheral arteries raging from the bare metal stent to the drug coated balloon and drug eluting stent with outcome varying depending on the different field of application (i.e. SFA and below-the-knee). Results coming from the clinical trial are encouraging but further studies and direct comparison among the different technologies are demanded to determine the best therapy for peripheral vascular disease.

Preclinical In-Vivo Evaluation and Screening of Zinc Based Degradable Metals for Endovascular Stents

Zinc alloy development and characterization for vascular stent application has been facilitated by many standardized and inexpensive methods. In contrast, overly simplistic in vitro approaches dominate the preliminary biological testing of materials. In 2012, our group introduced a metal wire implantation model in rats as a cost effective and realistic approach for the biocompatibility evaluation of degradable materials in the vascular environment. Here, we have adapted metrics routinely used for evaluating stents to quantitatively characterize the long-term progression of the neointima that forms around zinc based wire implants. Histological cross-sections were used to measure the length of neointimal protrusion from the wire into the lumen (denoted wire to lumen thickness), the base neointimal length (describing the breadth of neointimal activation), and the neointimal area. These metrics were used to provide in depth characterization details for neointimal responses to Zn-Mg and Zn-Li alloys and may be used to compare different materials.

Rotational Atherectomy Plus Drug-Coated Balloon Angioplasty for the Treatment of Total In-Stent Occlusions in Iliac and Infrainguinal Arteries

PURPOSE

To analyze the long-term outcomes of a hybrid treatment method combining rotational atherectomy with drug-coated balloon (DCB) angioplasty in patients with total in-stent occlusion in the iliac and/or infrainguinal arteries.

MATERIALS AND METHODS

Between April 2014 and June 2017, 74 consecutive patients (mean age 66.7±9.7 years; 49 men) with total occlusion of a previously implanted stent underwent endovascular recanalization using the Rotarex system and DCB angioplasty. Half (37, 50%) of the patients had critical limb ischemia (CLI), and 30 (41%) of the procedures were performed in emergency. Mean lesion length was 22±15 cm.

RESULTS

Overall procedure success was achieved in 73 (98.6%) patients. Six (8.1%) CLI patients developed distal embolism that responded to thrombolysis. Three (4.1%) dissections did not require treatment, while 1 (1.4%) perforation necessitated stent-graft implantation. In all, 33 (44.6%) patients had an additional stent implanted, mainly due to a suboptimal outcome (n=28) or complications (n=5 including the stent-graft). The restenosis rate assessed by duplex ultrasound at 12 months was 20.5% (15/73); 4 (5.5%) patients underwent target lesion revascularization. Recurrent restenosis was more frequent in patients with Rutherford category 5 ischemia (p=0.005), in emergency procedures (p=0.021), after extensive procedures involving 3 independent vessel segments (p=0.016), and if a complication arose during the procedure (p<0.001). In multivariate analysis, only occurrence of a procedural complication was an independent predictor of recurrent restenosis at 1 year (OR 63.3, 95% CI 5.7 to 701.5).

CONCLUSION

These findings imply that rotational atherectomy and DCB angioplasty may provide satisfactory outcomes in the treatment of total in-stent occlusion, with a satisfactory recurrent restenosis rate at 12 months.

Disruptive technological advances in vascular access for dialysis: an overview

End-stage kidney disease (ESKD), one of the most prevalent diseases in the world and with increasing incidence, is associated with significant morbidity and mortality. Current available modes of renal replacement therapy (RRT) include dialysis and renal transplantation. Though renal transplantation is the preferred and ideal mode of RRT, this modality may not be available to all patients with ESKD. Moreover, renal transplant recipients are constantly at risk of complications associated with immunosuppression and immunosuppressant use, and posttransplant lymphoproliferative disorder. Dialysis may be the only available modality in certain patients. However, dialysis has its limitations, which include issues associated with lack of vascular access, risks of infections and vascular thrombosis, decreased quality of life, and absence of biosynthetic functions of the kidney. In particular, the creation and maintenance of hemodialysis vascular access in children poses a unique set of challenges to the pediatric nephrologist owing to the smaller vessel diameters and vascular hyperreactivity compared with adult patients. Vascular access issues continue to be one of the major limiting factors prohibiting the delivery of adequate dialysis in ESKD patients and is the Achilles' heel of hemodialysis. This review aims to provide a critical overview of disruptive technological advances and innovations for vascular access. Novel strategies in preventing neointimal hyperplasia, novel bioengineered products, grafts and devices for vascular access will be discussed. The potential impact of these solutions on improving the morbidity encountered by dialysis patients will also be examined.

Evaluation of drug release from paclitaxel + hirudin-eluting balloons and the resulting vascular reactivity in healthy pigs

This study explored drug release from paclitaxel + hirudin-eluting balloons in a healthy pig coronary artery model and objectively evaluated the vascular reactivity after balloon intervention. A total of 12 healthy white pigs were used for the analysis of drug release from the experimental balloon. The observational time-points included immediately following implantation and day 7, 30, and 180 after surgery. At each time-point, two pigs were treated with the paclitaxel + hirudin-eluting balloon and one with the B. Braun paclitaxel-eluting balloon (control). Quantitative coronary angiography (QCA) of the target vessel was performed before and after balloon treatment. One pig died before the designated experimental endpoint, and no abnormal clinical signs or tissue lesions were observed in the other pigs. QCA showed different degrees of spasms after balloon treatment, all of which recovered shortly thereafter without intervention. The blood vessel lumens were all open and without dissection or angioma. Drug content determination showed that the experimental balloon performed better than the control balloon with regard to drug release, vascular absorption and expulsion rate. The paclitaxel + hirudin-eluting balloon catheter was easy to manipulate. The drug release from the experimental balloon was stable and resulted in good vascular reactivity. The safety and efficacy of the experimental balloon were not worse than the paclitaxel-eluting balloon that is currently on the market.

Understanding the Impact of Stent and Scaffold Material and Strut Design on Coronary Artery Thrombosis from the Basic and Clinical Points of View

The technology of percutaneous coronary intervention (PCI) is constantly being refined in order to overcome the shortcomings of present day technologies. Even though current generation metallic drug-eluting stents (DES) perform very well in the short-term, concerns still exist about their long-term efficacy. Late clinical complications including late stent thrombosis (ST), restenosis, and neoatherosclerosis still exist and many of these events may be attributed to either the metallic platform and/or the drug and polymer left behind in the arterial wall. To overcome this limitation, the concept of totally bioresorbable vascular scaffolds (BRS) was invented with the idea that by eliminating long-term exposure of the vessel wall to the metal backbone, drug, and polymer, late outcomes would improve. The Absorb-bioabsorbable vascular scaffold (Absorb-BVS) represented the most advanced attempt to make such a device, with thicker struts, greater vessel surface area coverage and less radial force versus contemporary DES. Unfortunately, almost one year after its initial approval by the U.S. Food and Drug Administration, this scaffold was withdrawn from the market due to declining devise utilization driven by the concerns about scaffold thrombosis (ScT) seen in both early and late time points. Additionally, the specific causes of ScT have not yet been fully elucidated. In this review, we discuss the platform, vascular response, and clinical data of past and current metallic coronary stents with the Absorb-BVS and newer generation BRS, concentrating on their material/design and the mechanisms of thrombotic complications from the pre-clinical, pathologic, and clinical viewpoints.

Treatment of juxta-anastomotic stenoses for failing distal radiocephalic arteriovenous fistulas: Drug-coated balloons versus angioplasty

The aim of our study is to report the results of two types (type A, type B) paclitaxel drug-coated balloon compared with standard percutaneous transluminal angioplasty in the treatment of juxta-anastomotic stenoses of mature but failing distal radiocephalic hemodialysis arteriovenous fistulas. Two groups of 26 and 44 patients treated with two different drug-coated balloon are compared with a control group of 86 treated with standard percutaneous transluminal angioplasty. A color Doppler ultrasound was performed to evaluate stenosis and for treatment planning. We assess primary patency, defined as the absence of dysfunction of the arteriovenous fistulas, patent lesion or residual stenosis < 30% and no need for further reintervention of target lesion. Primary patency and secondary patency are evaluated after 12 months with color Doppler ultrasound for the whole arteriovenous fistulas, defined as absolute (absolute primary patency, absolute secondary patency) and target lesion. Postprocedural technical and clinical success was 100%. After 12 months, absolute primary patency is 81.8% for type A, 84.1% type B, and 54.7% for standard percutaneous transluminal angioplasty; target lesion primary patency is 92% type A, 86.4% type B, and 62.8% standard percutaneous transluminal angioplasty; absolute secondary patency is 95.4% type A, 95.5% type B, and 80.7% standard percutaneous transluminal angioplasty; target lesion secondary patency is 100% type A, 97.7% type B, and 80.7% standard percutaneous transluminal angioplasty. All the patients treated with drug-coated balloon (type A + type B) have an absolute primary patency of 83.3%, a target lesion primary patency of 87.9%, an absolute secondary patency of 95.5%, and a target lesion secondary patency of 98.4%. Our study confirms that the use of drug-coated balloon, indiscriminately among different brands, improves primary patency with statistically significant difference in comparison with standard percutaneous transluminal angioplasty and decreases reintervention of target lesion in juxta-anastomotic stenoses of failing distal arteriovenous fistulas maintaining the radiocephalic fistula as long as possible.

Positive Vessel Remodelling

Since its introduction, the success of percutaneous transluminal coronary angioplasty (PTCA) has been jeopardised by recoil, neointima proliferation, and luminal renarrowing; however, the benefit of positive remodelling has not gained widespread attention. While vessels will remodel positively up to a certain stage in the development of atherosclerosis, the therapeutic application of this process remains low. The prevention of vessel shrinkage during the healing process, which represents the predominant mechanism of restenosis after PTCA, is a prerequisite of long-term success in PTCA. The antiproliferative drugs that are currently used mainly on stents are known to be capable of this. Primary clinical studies have reported that positive remodelling leads to beneficial effects in coronary and peripheral angioplasty if no foreign body is inserted, and a paradigm change in percutaneous coronary intervention towards far fewer implants is within reach.

The evolution of coronary stents

INTRODUCTION

Percutaneous coronary intervention (PCI) is 40 years old this year. From its humble beginnings of experimental work, PCI has transitioned over years with coronary artery stenting now a standard medical procedure performed throughout the world. Areas covered: The conversion from plain old balloon angioplasty (POBA) to the present era of drug eluting stents (DES) has been driven by many technological advances and large bodies of clinical trial evidence. The journey to present day practice has seen many setbacks, such as acute vessel closure with POBA; rates of instant restenosis with bare metal stents (BMS) and more recently, high rates of stent thrombosis with bioabsorbable platforms. This work discusses POBA, why there was a need for BMS, the use of inhibiting drugs to create 1^st generation DES, the change of components to 2^nd generation DES, the use of absorbable drug reservoirs and platforms, and possible future directions with Prohealing Endothelial Progenitor Cell Capture Stents. Expert commentary: This paper reviews the evolution from the original pioneering work to modern day practice, highlighting landmark trials that changed practice. Modern day contemporary practice is now very safe based on the latest drug eluting stents and supported by large datasets.

Development of Microporous Covered Stents: Geometrical Design of the Luminal Surface

To reduce in-stent restenosis rates we have developed newly designed covered stents, in which a stent strut is buried into a microporous elastomeric cover film to provide a physical barrier against tissue ingrowth and a pharmacological reservoir for drug-eluting.

The covered stents were prepared by dip-coating balloon expandable stents mounted on a stainless steel rod in a segmented polyurethane (SPU) solution, and were subsequently subjected to laser-processed microporing (pore diameter, 100 μm; interpore distance, 200 μm). The covered stents, which possessed flat luminal surfaces and micropores that were homogeneously arranged on the whole surface of the covering film, were deployed into the bilateral common carotid arteries of normal New Zealand white rabbits. Angiography after one month of implantation showed all stents were patent with little thrombus formation. The mean thickness of the formed neointimal layers was 292 ± 177 μm (n=8), which was close to the size in non-covered bare stent (231 ± 58 μm, n=7), but markedly decreased (about 2/3) from that in the previously developed wrapping-type covered stents (415 ± 173 μm, P<0.01, n=8).

Safety of Zilver PTX Drug-Eluting Stent Implantation Following Drug-Coated Balloon Dilation in a Healthy Swine Model

Purpose: To compare the safety of Zilver PTX drug-eluting stents (DES) following drug-coated balloon (DCB) angioplasty or conventional balloon angioplasty (BA) in a healthy porcine iliofemoral artery model. Methods: DES implantation following DCB (DCB+DES) or BA (BA+DES) was assessed by angiography and histology in the nondiseased iliofemoral arteries of 20 animals, with sacrifice at 1, 3, and 6 months. Safety assessment compared quantitative measures of vessel integrity (eg, preservation of artery geometry, structure, and lumen dimensions; absence of aneurysm; malapposition) and histological parameters (eg, excessive inflammation). The percentage of uncovered struts could not be >30% per section and the endothelial cell loss had to be <50%. The vascular and skeletal muscle changes in the downstream regions were also assessed histologically for evidence of emboli. Results: No significant differences in safety parameters, including inflammation and endothelial cell loss, were observed between the 2 groups at all time points. Percentage of fibrin was significantly higher in DCB+DES at 3 months [20.0% (IQR 11.6, 28.4) vs BA+DES 4.2% (IQR 1.4, 9.6), respectively; p=0.04], with consistent trends between groups at all time points. Medial smooth muscle cell loss peaked at 1 month and was not statistically different between groups at any time point, although the loss was greater in the DCB+DES group. Sections with arterioles exhibiting paclitaxel-associated fibrinoid necrosis in downstream tissues were observed exclusively in the DCB group at 1 month (14.3% of sections) and 3 months (11.5%). Conclusion: This preclinical study suggests that Zilver PTX stent implantation is a safe strategy after DCB angioplasty and might be considered for patients who require stenting after DCB treatment.

Transfer-molded wrappable microneedle meshes for perivascular drug delivery

After surgical procedures such as coronary/peripheral bypass grafting or endarterectomy for the treatment of organ ischemia derived from atherosclerosis, intimal hyperplasia (IH) which leads to restenosis or occlusion at the site of graft anastomosis frequently occurs. In order to inhibit IH caused by abnormal growth of smooth muscle cells (SMCs) in tunica media, various perivascular drug delivery devices are reported for delivery of anti-proliferation drugs into vascular tissue. However, there still remain conflicting requirements such as local and unidirectional delivery vs device porosity, and conformal tight device installation vs pulsatile expansion and constriction of blood vessels. In this study, a biodegradable microneedle (MN) array is developed on a flexible woven surgical mesh using a transfer molding method. Mechanical properties of 'wrappable' MN meshes are investigated and compared to the properties of blood vessels. Ex vivo and in vivo animal studies demonstrate enhanced drug delivery efficiency, efficacy for IH reduction, and safety of MN mesh. In particular, MN mesh showed significantly reduced neointiamal formation (11.1%) compared to other competitive groups (23.7 and 22.2%) after 4-week in vivo animal study. Additionally, wrappable MN meshes effectively suppressed side effects such as IH due to mechanical constriction, loss of toxic drug to the surroundings, and cell death that were frequently observed with other previous perivascular drug delivery devices.

Hardly water-soluble drug-loaded gelatin nanoparticles sustaining a slow release: preparation by novel single-step O/W/O emulsion accompanying solvent diffusion

Paclitaxel (PTX)-loaded gelatin nanoparticles (NPs) were prepared, for the first time, by novel O/W/O emulsion with a single-step emulsion process accompanying solvent diffusion, in contrast to the conventional double-step emulsion processes. Linoleic acid was chosen among the natural fatty acids as the exterior medium for the single-step emulsion process accompanying solvent diffusion. The size mean and zeta potential of the PTX-loaded gelatin NPs in their suspension were 164.95 nm (±6.43 nm) distributed with a polydispersity of 0.074 (±0.046) and -23.85 mV (±12.66 mV), respectively. The size of the PTX-loaded gelatin NPs prepared in this study was the smallest among the reported sizes of PTX-loaded gelatin NPs, which would contribute to the enhanced permeability and retention (EPR). In addition, TEM showed that the loaded PTX was located mostly inside the gelatin NPs unlike previous investigations. Accordingly, the conceptual model of the designed PTX-loaded gelatin nanoparticle was introduced. Sustaining a slow PTX release on a day-time scale without an initial burst release into a release medium was observed along with a delay of more than 2 days (i.e., 50 h) before a bursting PTX release from 50 to 70 h despite the addition of a protein degrading enzyme. The observed PTX-loading efficiency was 54.5%. This loading efficiency was greater than that of previous study using gelatin of bloom 75-100 of Lu et al. to prepare PTX-loaded gelatin NPs using a desolvation method.

Novel Poly(Diol Sebacate)s as Additives to Modify Paclitaxel Release From Poly(Lactic-co-Glycolic Acid) Thin Films

Paclitaxel (PTX) incorporation in poly(lactic-co-glycolic acid) (PLGA) matrices produce films with high tensile rigidity and slow release that fail to deliver the required release rate for most biomedical applications such as in drug eluting stents and cancer treatments. To modify and improve this behavior, a set of poly(diol sebacate)s were synthesized and fully characterized as possible additives. The tensile properties of PLGA blends were evaluated as these materials could be used as coatings in drug eluting stent applications. A significant improvement in mechanical flexibility was observed with 20% additive content, as it reduced the Young's modulus value and increased the maximum deformation at break. PTX release was studied and correlated with the release of additive from PLGA films. An increase in the initial burst release phase was observed on all blends when compared to the control films of PLGA. Modulation of PTX release was achieved by altering the hydrophilicity degree of the additive or its percentage content on the blend. This supports the possibility that PTX was partitioned into the additive phase. Cytotoxicity analyses of novel additives were performed on mouse embryonic fibroblasts NIH/3T3.