Endocardial carbon-braid electrodes. A new concept for lower defibrillation thresholds

Voltage dependence of ICD lead polarization and the effect of iridium oxide coating

Nonthoracotomy leads (NTLs) with an iridium oxide (IROX) coating exhibit lower defibrillation thresholds (DFTs) than uncoated NTLs. We tested whether adding an IROX coating to an active pectoral can would influence defibrillation efficacy. However, the primary purpose of this study was to examine the impedance changes that occur at different voltages for uncoated titanium NTLs and identical NTLs with an IROX coating. We studied anesthetized pigs with an NTL placed in the right ventricle and coupled this to an active pectoral can. Biphasic waveform DFTs were obtained for the four NTLs and can combinations: uncoated NTL and uncoated can, uncoated NTL and IROX can, IROX NTL and uncoated can, and IROX NTL and IROX can. The respective energy DFTs were: 23.6 +/- 6.9, 24.1 +/- 6.7, 21.3 +/- 6.0, and 21.4 +/- 7.0 J. The IROX NTL DFTs were significantly lower (P < 0.05) than the uncoated NTL DFTs (either can), confirming our previous study. We then used a low tilt monophasic waveform to assess impedance changes. The impedance rise for each NTL/can combination was measured at 50, 100, 300, and 700 V. Comparisons of impedance changes between voltage levels showed that the impedance rise was inversely related to voltage and was greatest with uncoated NTLs. The IROX coating of the NTL reduced the impedance rise at all shock voltages, but was particularly beneficial at the lower voltages. No advantage was seen when the pectoral can was coated with IROX regardless of which NTL was used. Our results suggest that low voltage applications, such as atrial defibrillation, would benefit most from the IROX-coated NTL, and further studies are warranted in this area.

Single shock endocavitary low energy intracardiac cardioversion of chronic atrial fibrillation

BACKGROUND

Discomfort related to low-energy internal cardioversion (LEIC) represents a real problem in patients (pts) with atrial fibrillation (AF). The aim of our study was to verify if a single shock could restore sinus rhythm (SR) with a lower discomfort for the pt.

METHODS

Thirty pts with chronic AF were randomized to receive a single 350 V shock (15 pts) or multiple shocks of increasing energy (15 pts). Three leads were positioned, respectively, in the coronary sinus and in the lateral right wall for shock delivery, and in the right ventricular apex for R wave synchronization. Truncated, biphasic shocks were used. In the first group a single 350 V shock was directly delivered and a second 400 V shock was given only if SR has not been restored. In the second group, beginning at 50 volts the voltage was increased in steps of 50 volts until SR restoration. No patient was sedated. After each shock the pts were asked to rate their discomfort on a scale of 1 to 5 (1 = not perceived, 5 = severe discomfort).

RESULTS

SR was restored in all the subjects. In group 1 SR was obtained in 12/15 (80%) pts with the first 350 V (8.1 +/- 0.8 joules) shock, while the remaining 3 patients required the second 400 V (10.2 +/- 0.3 joules) shock. In group 2 the mean atrial defibrillation threshold was 346.7 +/- 1029.7 volts (8.0 +/- 101.5 joules). Then discomfort score was 2.5 +/- 0.6 in group 1 and 3.3 +/- 10.6 in group 2 (p < 0.01).

CONCLUSIONS

A single shock of 350 V restores SR in the majority of pts with chronic AF; by use this new approach, LEIC is tolerated better than the multiple shocks step-up protocol.

Importance of electrode conductive surface area and edge effects on ventricular defibrillation efficacy

INTRODUCTION

The role of edge effects and electrode surface area of the right ventricular (RV) transvenous lead (TVL) on defibrillation efficacy is unknown.

METHODS AND RESULTS

Defibrillation threshold (DFT) testing was conducted randomly in 12 dogs using ring electrode leads in an RV/SVC (superior vena cava) or RV/SVC/patch system. The leads (RV-4, RV-8t, RV-8, RV-15) had electrode surface areas of 20%, 20%, 40%, and 70%, respectively. A computer model predicted the magnitude of electrode surface current (RV-8t > RV-4 > RV-8 > RV-15) and the potential distribution (PD) at four sites: electrode surface (site a) and at 2 mm (b), 4 mm (c), and 8 mm (d) away from the surface. Despite different near-field PDs (sites a, b, c), PDs were nearly identical at site d. Resistance decreased as the surface area increased. DFT energy for the RV-15 lead was lower than the RV-4 and RV-8t. There was no difference between energy requirements for the RV-15 and RV-8 leads. No difference was found in DFT current for each lead. Comparison of the RV-8t and RV-4 leads showed no difference in DFT energy despite a lower resistance and a greater number of edges.

CONCLUSIONS

Increasing the RV TVL surface area lowered the resistance. However, surface area coverages > or = 40% did not lower DFT energy. No significant change in DFT current occurred despite different predicted near-field current densities. PDs were nearly identical 8 mm from the electrode surface. Thus, the far-field current density appears to play a more important role in determining defibrillation success.

Internal cardioversion of chronic atrial fibrillation in patients

Transvenous internal cardioversion of chronic AF using a right atrium (RA) coronary sinus (CS) vector requires more energy than cardioversion of paroxysmal AF. Chronic AF is not terminated in 25% of patients using biphasic shocks up to 10 J. We therefore evaluated efficacy, safety, and tolerability of internal cardioversion using a "unipolar" configuration (RA to skin patch) and biphasic shocks in patients with long-lasting AF and different heart disease. In each patient, biphasic R wave synchronous shocks were delivered between a large defibrillating surface area electrode in the RA and a skin patch in the left prepectoral position. Defibrillation protocol started with a test shock of 0.4 J. Shocks were repeated and increased until termination of AF or a maximum of 34 J. Sedation was used when the patient described the shock as painful. This study included 11 patients with a mean age of 67 +/- 8 years (range 56-83). AF duration was > or = 1 month in all patients with a mean duration of 11 +/- 11 months (range 2-36). Underlying heart disease was present in all patients and the mean left atrial dimension was 43 +/- 9 mm (range 26-57). AF was terminated in 10 of 11 patients (91%) with a mean delivered energy of the successful shocks of 18.7 +/- 8.7 J (median energy 16.9 J; range 7.3-32.5) and a mean leading edge voltage of 564 +/- 129 V. The mean shock impedance at the defibrillation threshold was 71 +/- 13 omega (range 59-103). A total of 131 shocks were delivered without any complication and proarrhythmia episodes. We conclude that low energy "unipolar" internal cardioversion is a simple, safe, and effective technique for termination of chronic AF in patients with heart disease. The procedure is often tolerated under light sedation.

Does reducing capacitance have potential for further miniaturisation of implantable defibrillators?

OBJECTIVE

To determine whether considerably smaller capacitors could replace 125 microF capacitors as the standard for use in implantable defibrillators.

METHODS

Measured energy, impedance, voltage, and current delivered were compared at defibrillation threshold in 10 mongrel dogs for defibrillation using 75 microF and 125 microF capacitors alternated randomly. Defibrillation was attempted with biphasic shocks of comparable tilt between an endocardial lead in the right ventricular apex and a "dummy" active can of an experimental implantable device placed in the subpectoral position.

RESULTS

A reduction of capacitor size of 40% was associated with an increase in voltage of 21% and in current of 22%. With a 65% tilt, no significant differences were found between the two capacitances with respect to the impedance or energy required for defibrillation.

CONCLUSIONS

Multiple advances in electrode material, electrode configuration, shock morphology, and shock polarity have reduced defibrillation energy requirements. Smaller capacitors could be used in implantable cardioverter/defibrillators without a major decrease in effectiveness.

Pain threshold for low energy intracardiac cardioversion of atrial fibrillation with low or no sedation

Recent studies have shown that internal cardioversion of atrial fibrillation is safe and effective. In this randomized prospective study, we have tried to evaluate the influence of different waveforms on the perception of pain during internal cardioversion in patients with chronic atrial fibrillation.

METHODS

Internal cardioversion was performed with minimal or no sedation in 31 consecutive patients. R wave triggered, biphasic shocks of 6 ms/6 ms or 3 ms/3 ms duration (randomly selected) and approximately 65% tilt were used starting with a 50-V test shock. The shock intensity was increased in 40-V steps up to a maximum voltage of 520 V Shocks were applied via two custom-made catheters (Elecath, Rahway, NJ). In 16 patients (3 females, age 61 +/- 11 years, left atrium diameter 58 +/- 5 mm, duration of atrial fibrillation 4 +/- 4 months), 6/6 waveforms were used, and in 15 patients (1 female, age 62 +/- 5 years, left atrium diameter 59 +/- 4 mm, duration of atrial fibrillation 5 +/- 2 months), 3/3 waveforms were used. After cardioversion, each patient was asked to quantify their pain on a scale from 0-10 (0 = no pain, 10 = intolerable). Fourteen of the 15 patients in the 3/3 ms and 15 of the 16 patients in the 6/6 ms group were successfully cardioverted. Patients from the 6/6 waveform group were cardioverted with a lower mean voltage of 254/92 versus 355/127 V (P < 0.02), at lower pain score 1.8 +/- 1.3 versus 4.2 +/- 2.2 (P < 0.05) with equivalent energy (6.8 +/- 2.8 versus 6.2 +/- 1.5 J, n.s.) and required lower doses of midazolam of 2.2 +/- 1.9 versus 4.0 +/- 1.8 mg IV (P < 0.02). The waveform used in internal cardioversion seems to have a major impact on the patients' perception of pain. These results imply that energy determines the success of a shock, but voltage determines the pain perceived by the patient. The use of waveforms that deliver greater energy at lower peak voltages offers the possibility of internal cardioversion with less sedation and greater patient tolerance.