Fabrication and characterization of hydroxyapatite-coated polystyrene disks for use in osteoprogenitor cell culture

Correlation between Surface Properties of Polystyrene and Polylactide Materials and Fibroblast and Osteoblast Cell Line Behavior: A Critical Overview of the Literature

Bone reconstruction remains an important challenge today in several clinical situations, notably regarding the control of the competition occurring during proliferation of osteoblasts and fibroblasts. Polystyrene and polylactide are reference materials in the biomedical field. Therefore, it could be expected from the literature that clear correlations have been already established between the behavior of fibroblasts or osteoblasts and the surface characteristics of these materials. After an extensive analysis of the literature, although general trends could be established, our critical review has highlighted the need to develop a more in-depth analysis of the surface properties of these materials. Moreover, the large variation noticed in the experimental conditions used for in vitro animal cell studies impairs comparison between studies. From our comprehensive review on this topic, we have suggested several parameters that would be valuable to standardize to integrate the data from the literature and improve our knowledge on the cell-material interactions.

Controlled M1-to-M2 transition of aged macrophages by calcium phosphate coatings

Older adults suffer from weakened and delayed bone healing due to age-related alterations in bone cells and in the immune system. Given the interaction between the immune system and skeletal cells, therapies that address deficiencies in both the skeletal and the immune system are required to effectively treat bone injuries of older patients. The sequence of macrophage activation observed in healthy tissue repair involves a transition from a pro-inflammatory state followed by a pro-reparative state. In older patients, inflammation is slower to resolve and impedes healing. The goal of this study was to design a novel drug delivery system for temporal guidance of the polarization of macrophages using bone grafting materials. A biomimetic calcium phosphate coating (bCaP) physically and temporally separated the pro-inflammatory stimulus interferon-gamma (IFNγ) from the pro-reparative stimulus simvastatin (SIMV). Effective doses were identified using a human monocyte line (THP-1) and testing culminated with bone marrow macrophages obtained from old mice. Sequential M1-to-M2 activation was achieved with both cell types. These results suggest that this novel immunomodulatory drug delivery system holds potential for controlling macrophage activation in bones of older patients.

Calcium phosphate coatings elaborated by the soaking process on titanium dental implants: Surface preparation, processing and physical-chemical characterization

OBJECTIVE

Dental implant manufacturers are looking for new surfaces to improve osseointegration. It is accepted that calcium phosphate coatings favor bone healing. Among all the techniques, the soaking process seems attractive because of its ability in producing a bioactive coating at low temperature. The objective of this study is to improve the titanium implant surface roughness and chemistry by optimizing the surface preparation and the soaking process parameters to produce a bioactive and adherent calcium phosphate coating.

METHODS

Titanium samples were sandblasted and acid etched. Coatings were realized by an alternate soaking process including a centrifugation step to create a phosphate solution thin film on the implant that reacts with the calcium of the second bath. We performed a characterization of the sample surface with complementary physical and physico-chemical techniques to assess the effect of surface preparation and coating process operating parameters on coating formation and characteristics.

RESULTS

Surface preparation led to a roughness around 1.6μm, micro-porosities, high surface wettability and removed the embedded sandblasting particles. We showed that the centrifugation step is critical and determines the coating formation, coverage and thickness. A thin coating (∼2μm) composed of apatite analogous to bone mineral was deposited. The coating adhesion was demonstrated by screwing/unscrewing test in an artificial jawbone.

SIGNIFICANCE

The titanium dental implant pre-treatment and coating developed in this study is expected to favor early implant osseointegration through coating dissolution in vivo and could be associated with biological active agents to confer additional functionality to the coating.

Cell Type Influences Local Delivery of Biomolecules from a Bioinspired Apatite Drug Delivery System

Recently, the benefit of step-wise sequential delivery of fibroblast growth factor-2 (FGF-2) and bone morphogenetic protein-2 from a bioinspired apatite drug delivery system on mouse calvarial bone repair was demonstrated. The thicknesses of the nanostructured poly-l-Lysine/poly-l-Glutamic acid polyelectrolyte multilayer (PEM) and the bone-like apatite barrier layer that make up the delivery system, were varied. The effects of the structural variations of the coating on the kinetics of cell access to a cytotoxic factor delivered by the layered structure were evaluated. FGF-2 was adsorbed into the outer PEM, and cytotoxic antimycin-A (AntiA) was adsorbed to the substrate below the barrier layer to detect the timing of the cell access. While MC3T3-E1 osteoprogenitor cells accessed AntiA after three days, the RAW 264.7 macrophage access occurred within 4 h, unless the PEM layer was removed, in which case the results were reversed. Pits were created in the coating by the RAW 264.7 macrophages and initiated delivery, while the osteoprogenitor cell access to drugs occurred through a solution-mediated coating dissolution, at junctions between the islands of crystals. Macrophage-mediated degradation is therefore a mechanism that controls drug release from coatings containing bioinspired apatite.

Biomimetic calcium phosphate/polyelectrolyte multilayer coatings for sequential delivery of multiple biological factors

Combinations of growth factors synergistically enhance tissue regeneration, but typically require sequential, rather than co-delivery from biomaterials for maximum efficacy. Polyelectrolyte multilayer (PEM) coatings can deliver multiple factors without loss of activity; however, sequential delivery from PEM has been limited due to interlayer diffusion that results in co-delivery of the factors. This study shows that addition of a biomimetic calcium phosphate (bCaP) barrier layer to a PEM coating effectively prevents interlayer diffusion and enables sequential delivery of two different biomolecules via direct cell access. A simulated body fluid method was used to deposit a layer of bCaP followed by 30 bilayers of PEM made with poly-l-Lysine (+) and poly l-Glutamic acid (-) (bCaP-PEM). Measurements of MC3T3-E1 proliferation and viability over time on bCaP-PEM were used to demonstrate the sequential delivery kinetics of a proliferative factor [fibroblast growth factor-2 (FGF-2)] followed by a cytotoxic factor (antimycin A, AntiA). FGF-2 and AntiA both retained their bioactivity within bCaP-PEM, yet no release of FGF-2 or AntiA from bCaP-PEM was observed when cells were absent indicating a cell-mediated, local delivery process. This coating technique is useful for a variety of applications that would benefit from highly localized, sequential delivery of multiple biomolecules governed by cell initiated degradation that avoids off-target effects associated with diffusion-based release. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1500-1509, 2017.

A nondestructive method for evaluating in vitro osteoblast differentiation on biomaterials using osteoblast-specific fluorescence

Transgenic mice with a Col1a1-promoter-driven transgene pOBCol2.3GFP were previously developed to visually identify mature osteoblasts through fluorescent expression. Our goal was to determine if this technology could be used to nondestructively evaluate the in vitro differentiation of osteoprogenitor cells on biomaterials such as biomimetic carbonated hydroxyapatite (cHA). Primary osteoprogenitor cells were harvested from calvaria of neonatal Col2.3GFP transgenic mice and cultured on cHA and a tissue culture polystyrene (TCPS) control. The distribution of intensities and area percentage of green fluorescent protein (GFP)-positive cells were quantified using fluorimetry and image analysis of fluorescent microscopy. At 14 days, an increased area and higher mean intensity of GFP-positive cells was observed on cHA as compared to TCPS, indicating more rapid differentiation on cHA. Notably, there were large continuous regions of GFP-positive osteoblasts on cHA, in contrast to the sparse, nodules of osteoblasts on TCPS, implying that cHA provides an osteogenic cue to cells. Xylenol orange staining was capable of distinguishing osteoblast-initiated mineral from the cHA substrate. With this method the unique pattern of osteoblast differentiation on cHA was clearly observed for the first time. Importantly, the generalized method can be used for rapid, high-throughput, nondestructive screening of biomaterials intended to enhance osteogenic differentiation.