The Critical Roles of Water in the Processing, Structure, and Properties of Nanocellulose

The cellulose industry depends heavily on water owing to the hydrophilic nature of cellulose fibrils and its potential for sustainable and innovative production methods. The emergence of nanocellulose, with its excellent properties, and the incorporation of nanomaterials have garnered significant attention. At the nanoscale level, nanocellulose offers a higher exposure of hydroxyl groups, making it more intimate with water than micro- and macroscale cellulose fibers. Gaining a deeper understanding of the interaction between nanocellulose and water holds the potential to reduce production costs and provide valuable insights into designing functional nanocellulose-based materials. In this review, water molecules interacting with nanocellulose are classified into free water (FW) and bound water (BW), based on their interaction forces with surface hydroxyls and their mobility in different states. In addition, the water-holding capacity of cellulosic materials and various water detection methods are also discussed. The review also examines water-utilization and water-removal methods in the fabrication, dispersion, and transport of nanocellulose, aiming to elucidate the challenges and tradeoffs in these processes while minimizing energy and time costs. Furthermore, the influence of water on nanocellulose properties, including mechanical properties, ion conductivity, and biodegradability, are discussed. Finally, we provide our perspective on the challenges and opportunities in developing nanocellulose and its interplay with water.

Water as the often neglected medium at the interface between materials and biology

Despite its apparent simplicity, water behaves in a complex manner and is fundamental in controlling many physical, chemical and biological processes. The molecular mechanisms underlying interaction of water with materials, particularly polymer networks such as hydrogels, have received much attention in the research community. Despite this, a large gulf still exists in applying what is known to rationalize how the molecular organization of water on and within these materials impacts biological processes. In this perspective, we outline the importance of water in biomaterials science as a whole and give indications for future research directions towards emergence of a complete picture of water, materials and biology.

Roles of interfacial water states on advanced biomedical material design

When biomedical materials come into contact with body fluids, the first reaction that occurs on the material surface is hydration; proteins are then adsorbed and denatured on the hydrated material surface. The amount and degree of denaturation of adsorbed proteins affect subsequent cell behavior, including cell adhesion, migration, proliferation, and differentiation. Biomolecules are important for understanding the interactions and biological reactions of biomedical materials to elucidate the role of hydration in biomedical materials and their interaction partners. Analysis of the water states of hydrated materials is complicated and remains controversial; however, knowledge about interfacial water is useful for the design and development of advanced biomaterials. Herein, we summarize recent findings on the hydration of synthetic polymers, supramolecular materials, inorganic materials, proteins, and lipid membranes. Furthermore, we present recent advances in our understanding of the classification of interfacial water and advanced polymer biomaterials, based on the intermediate water concept.

Characterization of Hydration Water Bound to Choline Phosphate-Containing Polymers

Zwitterionic methacrylate polymers with either choline phosphate (CP) (poly(MCP)) or phosphorylcholine (PC) (poly(MPC)) side groups were analyzed to characterize the bound hydration water molecules as nonfreezing water (NFW), intermediate water (IW), or free water (FW). This characterization was carried out by differential scanning calorimetry (DSC) of polymer/water systems, and the enthalpy changes of cold crystallization and melting were determined. The electron pair orientation of CP is opposite to that of PC, and the former binds the alkyl terminal groups at the phosphate esters. The numbers of NFW and IW molecules per monomer unit of poly(MCP) with an isopropyl terminal group were estimated to be 10.7 and 11.3 mol/mol, respectively, which were slightly greater than those of the poly(MCP) bearing an ethyl terminal group. More NFW and IW molecules hydrated the phosphobetaine polyzwitterions, poly(MCP) and poly(MPC), compared with carboxybetaine and sulfobetaine polymers. Moreover, the hydration states of polyelectrolytes were compared with the zwitterionic polymers. Finally, we discuss the relationship between the amount of hydration water and bio-inert properties.

Experimental Evidence of Slow Mode Water in the Vicinity of Poly(ethylene oxide) at Physiological Temperature

In some synthetic polymers used for medical applications, hydration water in the vicinity of the polymer chains is known to play an important role in biocompatibility and is referred to as intermediate water. The crystallization of water below 0 °C observed during thermal analysis has been considered as evidence of the presence of intermediate water. However, the origin and physicochemical properties of intermediate water have not yet been elucidated. In this study, as a typical biocompatible polymer, poly(ethylene oxide) and its hydration water were investigated with the use of terahertz time-domain spectroscopy and quasi-elastic neutron scattering. The obtained results prove the existence of a significant amount of mobile water that interacts with the polymer chains even when the water content is low at physiological temperatures.

Fluorine-containing bio-inert polymers: Roles of intermediate water

Fluorine-containing polymers are used not only in industrial processes but also in medical applications, because they exhibit excellent heat, weather, and chemical resistance. As these polymers are not easily degraded in our body, it is difficult to use them in applications that require antithrombotic properties, such as artificial blood vessels. The material used for medical applications should not only be stable in vivo, but it should also be inert to biomolecules such as proteins or cells. In this review, this property is defined as "bio-inert," and previous studies in this field are summarized. Bio-inert materials are less recognized as foreign substances by proteins or cells in the living body, and they must be covered at interfaces designed with the concept of intermediate water (IW). On the basis of this concept, we present here the current understanding of bio-inertness and unusual blood compatibility found in fluoropolymers used in biomedical applications. IW is the water that interacts with materials with moderate strength and has been quantified by a variety of analytical methods and simulations. For example, by using differential scanning calorimetry (DSC) measurements, IW was defined as water frozen at around -40°C. To consider the role of the IW, quantification methods of the hydration state of polymers are also summarized. These investigations have been conducted independently because of the conflict between hydrophobic fluorine and bio-inert properties that require hydrophilicity. In recent years, not many materials have been developed that incorporate the good points of both aspects, and their properties have seldom been linked to the hydration state. This has been critically performed now. Furthermore, fluorine-containing polymers in medical use are reviewed. Finally, this review also describes the molecular design of the recently reported fluorine-containing bio-inert polymers for controlling their hydration state. STATEMENT OF SIGNIFICANCE: A material covered with a hydration layer known as intermediate water that interacts moderately with other objects is difficult to be recognized as a foreign substance and exhibits bio-inert properties. Fluoropolymers show high durability, but conflict with bio-inert characteristics requiring hydrophilicity as these research studies have been conducted independently. On the other hand, materials that combine the advantages of both hydrophobic and hydrophilic features have been developed recently. Here, we summarize the molecular architecture and analysis methods that control intermediate water and provide a guideline for designing novel fluorine-containing bio-inert materials.

Comparative study on water structures of poly(tetrahydrofurfuryl acrylate) and poly(2-hydroxyethyl methacrylate) by nuclear magnetic resonance spectroscopy

It is well known that poly(2-methoxyethyl acrylate) (PMEA) has good blood compatibility and its performance is attributed to its water structure. Recently, we applied solution nuclear magnetic resonance spectroscopy (solution-NMR) for analyzing the water structure in PMEA at ambient temperature and concluded that this method is useful because of the clear observation of the resonance peaks at low and high magnetic field (downfield and upfield, respectively) areas indicating the existence of more than two types of water. The present study was performed to compare the water structure of poly(tetrahydrofurfuryl acrylate) (PTHFA) and poly(2-hydroxyethyl methacrylate) (PHEMA) using solution ²H-NMR and deuterium oxide as water at the temperature range 15-45 °C. It was found that PTHFA has a different water structure from that of PHEMA. Water in PTHFA clearly showed two resonance peaks at downfield and upfield areas, with different spin-lattice relaxation times, T₁^2H (high and low values, respectively). These observations are similar to those of PMEA. In contrast, PHEMA showed only one broad resonance peak (at downfield) with a low T₁^2H value. Based on these observations, this study discusses the effect of water structures on the blood compatibility of these polymers.

Structure and State of Water in Branched N-Vinylpyrrolidone Copolymers as Carriers of a Hydrophilic Biologically Active Compound

Hydrated copolymers of N-vinylpyrrolidone (VP) with triethylene glycol dimethacrylate as a promising platform for biologically active compounds (BAC) were investigated by different physical chemical methods (dynamic light scattering, infrared spectroscopy, thermal gravimetric analysis, and differential scanning calorimetry) and the quantum chemical modeling of water coordination by the copolymers in a solution. According to the quantum chemical simulation, one to two water molecules can coordinate on one O-atom of the lactam ring of VP units in the copolymer. Besides the usual terminal coordination, the water molecule can form bridges to bind two adjacent C=O groups of the lactam rings of VP units. In addition to the first hydration shell, the formation of a second one is also possible due to the chain addition of water molecules, and its structure depends on a mutual orientation of C=O groups. We showed that N,N-dimethylbiguanidine hydrochloride (metformin) as a frontline drug for the treatment of type 2 diabetes mellitus can be associated in aqueous solutions with free and hydrated C=O groups of the lactam rings of VP units in studied copolymers. Based on the characteristics of the H-bonds, we believe that the level of the copolymer hydration does not affect the behavior and biological activity of this drug, but the binding of metformin with the amphiphilic copolymer will delight in the penetration of a hydrophilic drug across a cell membrane to increase its bioavailability.

Molecular Dynamics Study on the Water Mobility and Side-Chain Flexibility of Hydrated Poly(ω-methoxyalkyl acrylate)s

Intermediate water (IW) is known to play an important role in the antifouling property of biocompatible polymers. However, how IW prevents protein adsorption is still unclear. To understand the role of IW in the antifouling mechanism, molecular dynamics simulation was used to investigate the dynamic properties of water and side-chains for hydrated poly(ω-methoxyalkyl acrylate)s (PMCxA, where x indicates the number of methylene carbons) with x = 1-6 and poly(n-butyl acrylate) (PBA) in this study. Since the polymers uptake more water than their equilibrium water content (EWC) at the polymer/water interface, we analyzed the hydrated polymers at a water content higher than that of EWC. It was found that the water molecules interacting with one polymer oxygen atom (BW1), of which most are IW molecules, in PMC2A exhibit the lowest mobility, while those in PBA and PMC1A show a higher mobility. The result was consistent with the expectation that the biocompatible polymer with a long-resident hydration layer possesses good antifouling property. Through the detailed analysis of side-chain binding with three different types of BW1 molecules, we found that the amount of side-chains simultaneously interacting with two BW1 molecules, which exhibit the highest flexibility among the three kinds of side-chains, is the lowest for PMC1A. The high mobility of BW1 is thus suggested as the main factor for the poor protein adsorption resistance of PMC1A even though it possesses enough IW content and relatively flexible side-chains. Contrarily, a maximum amount of side-chains simultaneously interacting with two BW1 molecules was found in the hydrated PMC3A. The moderate side-chain length of PMC3A allows side-chains to simultaneously interact with two BW1 molecules and minimizes the hydrophobic part attractively interacting with a protein at the polymer/water interface. The unique structure of PMC3A may be the reason causing the best protein adsorption resistance among the PMCxAs.

Role of interfacial water in determining the interactions of proteins and cells with hydrated materials

Water molecules play a crucial role in biointerfacial interactions, including protein adsorption and desorption. To understand the role of water in the interaction of proteins and cells at biological interfaces, it is important to compare particular states of hydration water with various physicochemical properties of hydrated biomaterials. In this review, we discuss the fundamental concepts for determining the interactions of proteins and cells with hydrated materials along with selected examples corresponding to our recent studies, including poly(2-methoxyethyl acrylate) (PMEA), PMEA derivatives, and other biomaterials. The states of water were analyzed by differential scanning calorimetry, in situ attenuated total reflection infrared spectroscopy, and surface force measurements. We found that intermediate water which is loosely bound to a biomaterial, is a useful indicator of the bioinertness of material surfaces. This finding on intermediate water provides novel insights and helps develop novel experimental models for understanding protein adsorption in a wide range of materials, such as those used in biomedical applications.

Thermoresponsive P(HEMA-co-OEGMA) copolymers: synthesis, characteristics and solution behavior

Random, thermoresponsive copolymers of 2-hydroxyethyl methacrylate (HEMA) and oligo(ethylene glycol) methyl ether methacrylate M _n = 300 (OEGMA) were synthesized via atom transfer radical polymerization (ATRP) in a DMSO/H₂O solvent mixture. Reactivity ratios were determined by the extended Kelen-Tudos method and found to be close to 1. Studies confirmed the randomness of the obtained copolymers. The thermoresponsiveness in water and in phosphate buffer (PBS) solutions and the influence of copolymer composition and solution concentration on the cloud point temperature (T _cp) were investigated. Phase transitions in water solutions were reversible and narrow. The response of P(HEMA-co-OEGMA) to temperature could be adjusted in the range from 66.5 °C to 21.5 °C by changing the HEMA content. In PBS solutions, significant differences in the heating/cooling cycle were observed for all investigated concentrations. The presence of kosmotropic salts in PBS decreased the T _cp value and caused thermal aggregation of chains to form a macroscopic aggregate at temperatures above the T _cp.

Charge and Peptide Concentration as Determinants of the Hydrogel Internal Aqueous Environment

Self-assembling peptides are a promising class of biomaterials with desirable biocompatibility and versatility. In particular, the oligopeptide (RADA)₄, consisting of arginine (R), alanine (A), and aspartic acid (D), self-assembles into nanofibers that develop into a three-dimensional hydrogel of up to 99.5% (w/v) water; yet, the organization of water within the hydrogel matrix is poorly understood. Importantly, peptide concentration and polarity are hypothesized to control the internal water structure. Using variable temperature deuterium solid-state nuclear magnetic resonance (²H NMR) spectroscopy, we measured the amount of bound water in (RADA)₄-based hydrogels, quantified as the non-frozen water content. To investigate how peptide polarity affects water structure, five lysine (K) moieties were appended to (RADA)₄ to generate (RADA)₄K₅. Hydrogels at 1 and 5% total peptide concentration were prepared from a 75:25 (w/w) blend of (RADA)₄:(RADA)₄K₅ and similarly analyzed by ²H NMR. Interestingly, at 5% peptide concentration, there was lower mobile water content in the lysinated versus the pristine (RADA)₄ hydrogel. Regardless of the presence of lysine, the 5% peptide concentration had higher non-frozen water content at temperatures as low as 217 ± 1.0 K, suggesting that bound water increases with peptide concentration. The bound water, though non-frozen, may be strongly bound to the charged lysine moiety to appear as immobilized water. Further understanding of the factors controlling water structure within hydrogels is important for tuning the transport properties of bioactive solutes in the hydrogel matrix when designing for biomedical applications.

Effect of methoxyethyl and methyl ester groups on platelet compatibility of polymers

Poly(2-methoxyethyl acrylate) is known to exhibit good blood compatibility. This study was designed to understand the effect of methoxyethyl ester groups on the platelet compatibility of polymers. Polymers bearing either methoxyethyl ester or methyl ester groups, such as poly(acrylate)s, poly(methacrylate)s, and poly(vinyl benzoate)s, were prepared and a comparative study of the ester groups was performed. Polymers bearing methoxyethyl ester groups and poly(methyl acrylate) exhibited good and approximately equal platelet compatibility, regardless of their chemical structure, as estimated using flow cytometry and scanning electron microscopy. To understand these results, the static properties (namely, surface wettability by contact angle and water structure by differential scanning calorimetry) and a dynamic property (13C-NMR relaxation time of the functional groups) were analyzed. The results showed that platelet compatibility could be interpreted from the water structure and dynamic property.

Impact of the Hydration States of Polymers on Their Hemocompatibility for Medical Applications: A Review

Water has a key role in the functioning of all biological systems, it mediates many biochemical reactions, as well as other biological activities such as material biocompatibility. Water is often considered as an inert solvent, however at the molecular level, it shows different behavior when sorbed onto surfaces like polymeric implants. Three states of water have been recognized: non-freezable water, which does not freeze even at -100 °C; intermediate water, which freezes below 0 °C; and, free water, which freezes at 0 °C like bulk water. This review describes the different states of water and the techniques for their identification and quantification, and analyzes their relationship with hemocompatibility in polymer surfaces. Intermediate water content higher than 3 wt % is related to better hemocompatibility for poly(ethylene glycol), poly(meth)acrylates, aliphatic carbonyls, and poly(lactic-co-glycolic acid) surfaces. Therefore, characterizing water states in addition to water content is key for polymer selection and material design for medical applications.

Effect of end segment on physicochemical properties and platelet compatibility of poly(propylene glycol)-initiated poly(methyl methacrylate)

It is well known that polyether-based copolymers have good blood compatibility, although many mechanisms have been proposed to explain their favorable performance. Our objective in carrying out the present study was to obtain a better understanding of the effect of the (poly)ether segment on blood compatibility. Therefore, we synthesized poly(propylene glycol) (PPG)-based initiators for atom transfer polymerization, where the number of propylene glycol (PG) units in the PPG (Pn(PG) was varied from 1 to 94. Methyl methacrylate (MMA) was polymerized using the initiators, resulting in the formation of polyMMAs with a PG-based ether part at the polymer terminal. We mainly investigated the effects of Pn(PG) on the surface properties and platelet compatibility of the PPG-polyMMA. X-ray photoelectron spectroscopy and surface contact angle (CA) analysis revealed the exposure of the PG units at the surface of the polymer. The platelet compatibility of the polymers was improved compared with a commercial polyMMA, even when Pn(PG) = 1. These results suggest that PG units have an important influence on favorable blood compatibility, regardless of the Pn(PG) value. We also investigated protein adsorption behavior in terms of the amount and deformation of fibrinogen adsorbed on the polymer surface.

Relationship between water structure and properties of poly(methyl methacrylate-b-2-hydroxyethyl methacrylate) by solid-state NMR

We previously reported that the platelet compatibility of methyl methacrylate (MMA)-2-hydroxyethyl methacrylate (HEMA) diblock copolymers is related to the characteristic water structure in the copolymer, as the copolymer has an excess amount of nonfreezing water when compared with that estimated from the amounts of water in HEMA and MMA homopolymers. Thus, in this study, the relationship between water structure and polymer structure, including the heterogeneity and mobility of the copolymer, was investigated using differential scanning calorimetry (DSC) and nuclear magnetic resonance (NMR) spectroscopy. The prepared copolymers were classified into two groups: copolymers with a short, constant polyMMA segment length (Mn = ~2900) and copolymers with a constant polyHEMA segment length (Mn = ~9500), whereas the lengths of the counter segments varied. DSC analysis showed that when the polyMMA and polyHEMA segment lengths are similar, the amount of nonfreezing water increases, regardless of the total molecular weight of the copolymer. NMR analysis showed that heterogeneity of the copolymer is enhanced and the mobility of the copolymer decreases when the segment lengths are similar. These findings suggested that the excess amount of nonfreezing water is formed when the properties of water near the HEMA unit change from freezing to nonfreezing owing to interactions with the MMA unit. In addition, it is suggested that the heterogeneity of the copolymer structure or the mobility of the polymer are involved in the generation of excess nonfreezing water.

Hydrogen-bonds structure in poly(2-hydroxyethyl methacrylate) studied by temperature-dependent infrared spectroscopy

Hydrogen-bonds structure in poly(2-hydroxyethyl methacrylate) (PHEMA) were investigated by means of temperature-dependent infrared (IR) spectroscopy. Spectral variations involved with the OH…OH and C=O…HO types of hydrogen-bonds were found around the glass transition temperature of 80°C. Hydrogen-bonds among the hydroxyl groups gradually dissociate with increasing temperature. In contrast, discontinuous variation in the carbonyl bands was observed around the glass transition temperature. An association of the C=O…HO type of hydrogen-bond with increasing temperature above the glass transition temperature was revealed. These were concluded from the present study that hydrogen-bonds among the hydroxyl groups in each side chain terminal suppress the main chain mobility in the polymer matrix below the glass transition temperature, while the dissociation of the OH…OH type of hydrogen-bonds induces the association of the C=O…HO type of hydrogen-bond. As a result, the mobility of the main chain is induced by the change in hydrogen-bonds structure at the glass transition temperature.