Sustained release of PEG-g-chitosan complexed DNA from poly(lactide-co-glycolide)

In vivo gene delivery with L-tyrosine polyphosphate nanoparticles

The concept of gene therapy is promising; however, the perceived risks and side effects associated with this technology have severely dampened the researchers' enthusiasm. Thus, the development of a nonviral gene vector without immunological effects and with high transfection efficiency is necessary. Currently, most nonviral vectors have failed to achieve the in vivo transfection efficiencies of viral vectors due to their toxicity, rapid clearance, and/or inappropriate release rates. Although our previous studies have successfully demonstrated the controlled-release of plasmid DNA (pDNA) polyplexes encapsulated into nanoparticles formulated with l-tyrosine polyphosphate (LTP-pDNA nanoparticles), the in vivo transfection capabilities and immunogenicity of this delivery system have yet to be examined. Thus, we evaluate LTP-pDNA nanoparticles in an in vivo setting via injection into rodent uterine tissue. Our results demonstrate through X-gal staining and immunohistochemistry of uterine tissue that transfection has successfully occurred after a nine-day incubation. In contrast, the results for the control nanoparticles show results similar to those of shams. Furthermore, reverse transcriptase polymerase chain reaction (RT-PCR) from the injected tissues confirms the transfection in vivo. To examine the immunogenicity, the l-tyrosine polyphosphate (LTP) nanoparticles have been evaluated in a mouse model. No significant differences in the activation of the innate immune system are observed. These data provide the first report for the potential use of controlled-release nanoparticles formulated from an amino acid based polymer as an in vivo nonviral vector for gene therapy.

Nanoparticle deposition onto biofilms

We develop a mathematical model of nanoparticles depositing onto and penetrating into a biofilm grown in a parallel-plate flow cell. We carry out deposition experiments in a flow cell to support the modeling. The modeling and the experiments are motivated by the potential use of polymer nanoparticles as part of a treatment strategy for killing biofilms infecting the deep passages in the lungs. In the experiments and model, a fluid carrying polymer nanoparticles is injected into a parallel-plate flow cell in which a biofilm has grown over the bottom plate. The model consists of a system of transport equations describing the deposition and diffusion of nanoparticles. Standard asymptotic techniques that exploit the aspect ratio of the flow cell are applied to reduce the model to two coupled partial differential equations. We perform numerical simulations using the reduced model. We compare the experimental observations with the simulation results to estimate the nanoparticle sticking coefficient and the diffusion coefficient of the nanoparticles in the biofilm. The distributions of nanoparticles through the thickness of the biofilm are consistent with diffusive transport, and uniform distributions through the thickness are achieved in about four hours. Nanoparticle deposition does not appear to be strongly influenced by the flow rate in the cell for the low flow rates considered.

Fabrication, characterization and in vitro evaluation of poly(D,L-lactide-co-glycolide) microparticles loaded with polyamidoamine-plasmid DNA dendriplexes for applications in nonviral gene delivery

We report, for the first time, on the preparation, characterization and in vitro testing of poly(D,L-lactide-co-glycolide) (PLGA) microparticles loaded with polyamidoamine (PAMAM)-plasmid DNA (pDNA) dendriplexes. Loading of pDNA into the PLGA microparticles increased by 150% when pDNA was first complexed with PAMAM dendrimers relative to loading of pDNA alone. Scanning electron microscopy (SEM) showed that the presence of PAMAM dendrimers in the PLGA microparticles created porous features and indentations on the surface of the microparticles. Loading PLGA microparticles with PAMAM-pDNA dendriplexes lowered the average PLGA microparticle size and changed the surface charge of the microparticles from negative to positive when compared to PLGA microparticles loaded with pDNA alone. The zetapotential and buffering capacity of the microparticles increased as the generation of the PAMAM dendrimer loaded in the PLGA microparticles increased. Gel electrophoresis assays showed that all the PLGA microparticle formulations were able to entrap the pDNA within the PLGA matrix. There was no significant difference in the cytotoxicity of PLGA microparticles loaded with PAMAM-pDNA dendriplexes when compared to PLGA microparticles loaded with pDNA alone. Furthermore, and in contrast to PAMAM dendrimers alone, the generation of the PAMAM dendrimer loaded in the PLGA microparticles had no significant impact on cytotoxicity or transfection efficiencies in human embryonic kidney (HEK293) or Monkey African green kidney fibroblast-like (COS7) cells. The transfection efficiency of PLGA microparticles loaded with generation 3 (G3) PAMAM-pDNA dendriplexes was significantly higher than PLGA microparticles loaded with pDNA alone in HEK293 and COS7 cells. PLGA microparticles loaded with G3 PAMAM-pDNA dendriplexes generated equivalent transfection efficiencies as (G3 to G6) PAMAM-pDNA dendriplexes alone in COS7 cells when the transfection was carried out in serum containing media. The delivery system developed in this report has low toxicity, high pDNA loading efficiencies and high transfection efficiencies that are not reduced in the presence of serum. A delivery system with these characteristics is expected to have significant potential for translational applications.

Formulating poly(lactide-co-glycolide) particles for plasmid DNA delivery

Biodegradable poly(lactide-co-glycolide) (PLGA) particles have shown significant potential for sustained and targeted delivery of several pharmaceutical agents, including plasmid DNA (pDNA). Here, we survey current approaches to PLGA particle preparation for pDNA delivery and discuss recent progress on optimizing formulation development.

Direct plasmid DNA encapsulation within PLGA nanospheres by single oil-in-water emulsion method

Plasmid DNA was encapsulated within poly(d,l-lactic-co-glycolic acid) (PLGA) nanospheres by using polyethylene glycol (PEG) assisted solubilization technique of plasmid DNA in organic solvents. Plasmid DNA was solubilized in an organic solvent mixture composed of 80% methylene chloride and 20% DMSO by producing PEG/DNA nano-complexes having an average diameter less than 100 nm. DNA could be solubilized in the organic solvent mixture to a greater extent with increasing the weight ratio of PEG/DNA. PLGA nanospheres encapsulating DNA were successfully prepared by the single O/W emulsion method. They exhibited greater loading efficiency and better structural integrity, compared to those prepared by the W/O/W double emulsion method. Plasmid DNA could be successfully delivered to macrophage cells to express an exogenous gene. This new formulation enabled high loading of intact plasmid DNA within PLGA nanospheres useful for DNA vaccines.

Composite structure of temperature sensitive chitosan microgel and anomalous behavior in alcohol solutions

Poly(N-isopropylacrylamide)/chitosan (PNIPAM/CS) core-shell microgel was synthesized by graft copolymerization. The microstructure of copolymers was characterized by FT-IR spectrum and (1)H-nuclear magnetic resonance ((1)H NMR). Transmission electron microscope (TEM) and dynamic light scattering (DLS) measurements display that the microgel has high monodispersity and with a core-shell structure. For swelling the microgel in various alcohol solutions, the particles first shrink; then flocculation occurs resulted from weak aggregation of particles with the increase of alcohol concentration. The investigation of the size of microgels as a function of temperature shows that the thermo-sensitive property is markedly exhibited when the alcohol concentration is low, and vanishes when the alcohol concentration exceeds some value where the microgels have the lowest size.

Preparation, characterization and transfection efficiency of cationic PEGylated PLA nanoparticles as gene delivery systems

The cationic polylactic acid (PLA) nanoparticle has emerged as a promising non-viral vector for gene delivery because of its biocompatibility and biodegradability. However, they are not capable of prolonging gene transfer and high transfection efficiency. In order to achieve prolonged delivery of cationic PLA/DNA complexes and higher transfection efficiency, in this study, we used copolymer methoxypolyethyleneglycol-PLA (MePEG-PLA), PLA and chitosan (CS) to prepare MePEG-PLA-CS NPs and PLA-CS NPs by a diafiltration method and prepared NPs/DNA complexes through the complex coacervation of nanoparticles with the pDNA. The object of our work is to evaluate the characterization and transfection efficiency of MePEG-PLA-CS versus PLA-CS NPs. The MePEG-PLA-CS NPs have a zeta potential of 15.7 mV at pH 7.4 and size under 100 nm, while the zeta potential of PLA-CS NPs was only 4.5 mV at pH 7.4. Electrophoretic analysis suggested that both MePEG-PLA-CS NPs and PLA-CS NPs with positive charges could protect the DNA from nuclease degradation and cell viability assay showed MePEG-PLA-CS NPs exhibit a low cytotoxicity to normal human liver cells. The potential of PLA-CS NPs and MePEG-PLA-CS NPs as a non-viral gene delivery vector to transfer exogenous gene in vitro and in vivo were examined. The pDNA being carried by MePEG-PLA-CS NPs, PLA-CS NPs and lipofectamine could enter and express in COS7 cells. However, the transfection efficiency of MePEG-PLA-CS/DNA complexes was better than PLA-CS/DNA and lipofectamine/DNA complexes by inversion fluorescence microscope and flow cytometry. It was distinctively to find that the transfection activity of PEGylation of complexes was improved. The nanoparticles were also tested for their ability to transport across the gastrointestinal mucosa in vivo in mice. In vivo experiments showed obviously that MePEG-PLA-CS/DNA complexes mediated higher gene expression in stomach and intestine of BALB/C mice compared to PLA-CS/DNA and lipofectamine/DNA complexes. These results suggested that MePEG-PLA-CS NPs have favorable properties for non-viral gene delivery.

The promise of chitosan microspheres in drug delivery systems

Chitosan is a partially deacetylated polymer obtained from the alkaline deacetylation of chitin, which is a glucose-based, unbranched polysaccharide that occurs widely in nature as the principal component of exoskeletons of crustaceans and insects, as well as of the cell walls of some bacteria and fungi. Chitosan exhibits a variety of physicochemical and biological properties resulting in numerous applications in fields such as waste water treatment, agriculture, fabric and textiles, cosmetics, nutritional enhancement and food processing. In addition to its lack of toxicity and allergenicity, its biocompatibility, biodegradability and bioactivity make it a very attractive substance for diverse applications as a biomaterial in the pharmaceutical and medical fields. This review takes a closer look at the biomedical applications of chitosan microspheres. Based on recent research and existing products, some new and potential future approaches in this fascinating area are discussed.