A new plasma-based method to promote cell adhesion on micrometric tracks on polystyrene substrates

Antifouling properties of poly(methyl methacrylate) films grafted with poly(ethylene glycol) monoacrylate immersed in seawater

Biofouling of all structures immersed in seawater constitutes an important problem, and many strategies are currently being developed to tackle it. In this context, our previous work shows that poly(ethylene glycol) monoacrylate (PEGA) macromonomer grafted on preoxidized poly(methyl methacrylate) (PMMAox) films exhibits an excellent repellency against the bovine serum albumin used as a model protein. This study aims to evaluate the following: (1) the prevention of a marine extract material adsorption by the modified surfaces and (2) the antifouling property of the PEGA-g-PMMAox substrates when immersed in natural seawater during two seasons (season 1: end of April-beginning of May 2007, and season 2: end of October-beginning of November 2007). The antifouling performances of the PEGA-g-PMMAox films are investigated for different PEG chain lengths and macromonomer concentrations into the PEGA-based coatings. These two parameters are followed as a function of the immersion time, which evolves up to 14 days. The influence of the PEGA layer on marine compounds (proteins and phospholipids) adsorption is evidenced by time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS). It was found that the antifouling efficiency of the PEGA-grafted surfaces increases with both PEGA concentration and PEG chain length.

Surface study of collagen/poloxamine hydrogels by a 'deep freezing' ToF-SIMS approach

In order to determine the presence of collagen molecules at the surface of a collagen-modified poloxamine hydrogel (a semi-interpenetrating network), the surface composition was studied using Time-of-Flight Secondary Ion Mass Spectra (ToF-SIMS). Collagen was added to the poloxamine hydrogel (poloxamine is a commercially available four-arm poly(ethylene oxide)/poly(propylene oxide) block copolymer, PEO/PPO) to promote the attachment of endothelial or liver cells. X-ray photoelectron spectroscopy (XPS) of dry samples showed a sharp increase in the N content from 0.6% in a pure poloxamine hydrogel to 8.8% in the collagen-containing material. Afterwards, the surface was studied by a 'deep freezing' ToF-SIMS approach under progressive heating from -120 to -60 degrees C. The positive spectrum of collagen/poloxamine at -65 degrees C displayed distinct signals corresponding to different amino acid fragments such as CH4N+ (30 m/z, Gly), C3HN2+ (43 m/z, Arg), C2H6N+ (44 m/z, Ala) and C4H5N2+(81m/z, His) and others corresponding to the PEO and PPO blocks of poloxamine. In addition, the negative spectrum showed peaks at 26 m/z (CN-), 32 m/z (S-) and 42 m/z (CNO-) characteristic of fragments of the collagen molecule. Imaging experiments indicated the homogeneous distribution of the collagen on the surface. These results supported the use of ToF-SIMS for the surface characterization of hydrated hydrogels and confirmed the collagen presence as the means whereby cells attach to the modified poloxamine matrix.

Biology on a chip: microfabrication for studying the behavior of cultured cells

The ability to culture cells in vitro has revolutionized hypothesis testing in basic cell and molecular biology research and has become a standard methodology in drug screening and toxicology assays. However, the traditional cell culture methodology--consisting essentially of the immersion of a large population of cells in a homogeneous fluid medium--has become increasingly limiting, both from a fundamental point of view (cells in vivo are surrounded by complex spatiotemporal microenvironments) and from a practical perspective (scaling up the number of fluid handling steps and cell manipulations for high-throughput studies in vitro is prohibitively expensive). Microfabrication technologies have enabled researchers to design, with micrometer control, the biochemical composition and topology of the substrate, the medium composition, as well as the type of neighboring cells surrounding the microenvironment of the cell. In addition, microtechnology is conceptually well suited for the development of fast, low-cost in vitro systems that allow for high-throughput culturing and analysis of cells under large numbers of conditions. Here we review a variety of applications of microfabrication in cell culture studies, with an emphasis on the biology of various cell types.

Plasma lithography--thin-film patterning of polymeric biomaterials by RF plasma polymerization I: Surface preparation and analysis

Plasma lithography, combining plasma deposition with photolithography, is described as a versatile method to manufacture all-polymeric substrates with thin-film patterns for applications in biomedical engineering. Patterns of a hydrophobic fluorocarbon plasma polymer with feature sizes between 5 and 100 microm were deposited on a base substrate in a lift-off process: an intermediate tetraglyme plasma polymer layer provides non-fouling properties to the base substrate. Careful analysis of critical process parameters identified the narrow window of process conditions that led to the formation of functional surface patterns. High pattern fidelity, aspect ratios, and resolution of the patterns are demonstrated by atomic force microscopy. Electron spectroscopy for chemical analysis (ESCA) and secondary ion mass spectroscopy (SIMS) were used to characterize the surfaces, showing good retention of the original chemical structure of the pattern components throughout the process. SIMS imaging was used for specific chemical imaging of the components. Potential applications for the patterned polymer films, e.g., for studying cell behavior in vitro in dependence of shape and size of adhering cells, are discussed.

Topographical and physicochemical modification of material surface to enable patterning of living cells

Precise control of the architecture of multiple cells in culture and in vivo via precise engineering of the material surface properties is described as cell patterning. Substrate patterning by control of the surface physicochemical and topographic features enables selective localization and phenotypic and genotypic control of living cells. In culture, control over spatial and temporal dynamics of cells and heterotypic interactions draws inspiration from in vivo embryogenesis and haptotaxis. Patterned arrays of single or multiple cell types in culture serve as model systems for exploration of cell-cell and cell-matrix interactions. More recently, the patterned arrays and assemblies of tissues have found practical applications in the fields of Biosensors and cell-based assays for Drug Discovery. Although the field of cell patterning has its origins early in this century, an improved understanding of cell-substrate interactions and the use of microfabrication techniques borrowed from the microelectronics industry have enabled significant recent progress. This review presents the important early discoveries and emphasizes results of recent state-of-the-art cell patterning methods. The review concludes by illustrating the growing impact of cell patterning in the areas of bioelectronic devices and cell-based assays for drug discovery.

Microengineering of cellular interactions

Tissue function is modulated by an intricate architecture of cells and biomolecules on a micrometer scale. Until now, in vitro cellular interactions were mainly studied by random seeding over homogeneous substrates. Although this strategy has led to important discoveries, it is clearly a nonoptimal analog of the in vivo scenario. With the incorporation--and adaptation--of microfabrication technology into biology, it is now possible to design surfaces that reproduce some of the aspects of that architecture. This article reviews past research on the engineering of cell-substrate, cell-cell, and cell-medium interactions on the micrometer scale.

Control of shape and size of vascular smooth muscle cells in vitro by plasma lithography

The ability to control the shape and size of cells is an important enabling technique for investigating influences of geometrical variables on cell physiology. Herein we present a micropatterning technique ("plasma lithography") that uses photolithography and plasma thin-film polymerization for the fabrication of cell culture substrates with a cell-adhesive pattern on a cell-repellent (non-fouling) background. The micron-level pattern was designed to isolate individual vascular smooth muscle cells (SMC) on areas with a projected area of between 25 and 3600 microm(2) in order to later study their response to cytokine stimulation in dependence of the cell size and shape as an indication for the phenotypic state of the cells. Polyethylene terephthalate substrates were first coated with a non-fouling plasma polymer of tetraglyme (tetraethylene glycol dimethyl ether). In an organic lift-off process, we then fashioned square- and rectangular-shaped islands of a thin fluorocarbon plasma polymer film of approximately 12-nm thickness. Electron spectroscopy for chemical analysis and secondary ion mass spectroscopy were used to optimize the deposition conditions and characterize the resulting polymers. Secondary ion mass spectroscopy imaging was used to visualize the spatial distribution of the polymer components of the micropatterned surfaces. Rat vascular SMC were seeded onto the patterned substrates in serum-free medium to show that the substrates display the desired properties, and that cell shape can indeed be controlled. For long-term maintenance of these cells, the medium was augmented with 10% calf serum after 24 h in culture, and the medium was exchanged every 3 days. After 2 weeks, the cells were still confined to the areas of the adhesive pattern, and when one or more cells spanned more than one island, they did not attach to the intervening tetraethylene glycol dimethyl ether (tetraglyme) background. Spreading-restricted cells formed a well-ordered actin skeleton, which was most dense along the perimeter of the cells. The shape of the nucleus was also influenced by the pattern geometry. These properties make the patterned substrates suitable for investigating if the phenotypic reversion of SMC can be influenced by controlling the shape and size of SMC in vitro.

Atomic Force Microscopy and Wettability Study of Oxidized Patterns at the Surface of Polystyrene

The surface properties of patterned surfaces made by a combination of photolithography and oxygen plasma treatment of polystyrene (PS) were investigated. PS and plasma-treated PS (PSox) were first characterized using X-ray photoelectron spectroscopy and the study of wetting dynamics (Wilhelmy plate method) in water and in solutions of different pH. The results indicated that the PSox surface may be viewed as covered with a polyelectrolyte-like gel, which swells depending on pH. It was then shown, using atomic force microscopy (AFM), that the adhesion force measured on PS with a silicon tip in water was higher compared with that measured on PSox. This feature allowed imaging of the oxidation patterns using the adhesion mapping mode. The origin of the pulloff force contrast, which could not be explained by combining Johnson-Kendall-Roberts theory and thermodynamic considerations, was attributed to repulsion between the tip and hydrated polymer chains present on the oxidized surface. Imaging was also performed in the lateral force mode, a higher friction being recorded on PS than on PSox. Copyright 1999 Academic Press.

Fibronectin-pluronic coadsorption on a polystyrene surface with increasing hydrophobicity: relationship to cell adhesion

Recently, patterned polystyrene surfaces containing hydrophobic (PS) and more hydrophilic (PSox) areas have been shown to be capable of directing cellular growth, which is mainly due to the competitive adsorption of adhesive and antiadhesive molecules. In this article, the competitive adsorption between a pluronic surfactant and fibronectin was studied on homogeneous PS or PSox substrates conditioned with mixtures containing increasing concentrations of one of the two molecules. Radiolabeling and X-ray photoelectron spectroscopy techniques showed that fibronectin adsorption increased on both surfaces if the fibronectin concentrations increased in the conditioning mixture. In contrast, fibronectin adsorption decreased on PSox and did not occur on PS surfaces when pluronic concentrations increased in the coating mixture. A comparison of these data with pheochromocytoma and Schwann cells cultured on patterned surfaces showed that the direction of cell growth on PSox areas depended first on the relative concentrations of the two components in the mixtures, and second, on their ratio; the best concentration ratio probably depends on the cell's ability to recondition its support.

Spatially controlled cell engineering on biodegradable polymer surfaces

Controlling receptor-mediated interactions between cells and template surfaces is a central principle in many tissue engineering procedures (1-3). Biomaterial surfaces engineered to present cell adhesion ligands undergo integrin-mediated molecular interactions with cells (1, 4, 5), stimulating cell spreading, and differentiation (6-8). This provides a mechanism for mimicking natural cell-to-matrix interactions. Further sophistication in the control of cell interactions can be achieved by fabricating surfaces on which the spatial distribution of ligands is restricted to micron-scale pattern features (9-14). Patterning technology promises to facilitate spatially controlled tissue engineering with applications in the regeneration of highly organized tissues. These new applications require the formation of ligand patterns on biocompatible and biodegradable templates, which control tissue regeneration processes, before removal by metabolism. We have developed a method of generating micron-scale patterns of any biotinylated ligand on the surface of a biodegradable block copolymer, polylactide-poly(ethylene glycol). The technique achieves control of biomolecule deposition with nanometer precision. Spatial control over cell development has been observed when using these templates to culture bovine aortic endothelial cells and PC12 nerve cells. Furthermore, neurite extension on the biodegradable polymer surface is directed by pattern features composed of peptides containing the IKVAV sequence (15, 16), suggesting that directional control over nerve regeneration on biodegradable biomaterials can be achieved.

Orientation of cell adhesion and growth on patterned heterogeneous polystyrene surface

Studies of neurite outgrowth or cell migration, two important processes in neuronal networks formation, are facilitated by cell culture models capable of orientating cellular growth and of designing a well-defined cellular pattern. Heterogeneous polystyrene surfaces composed of oxygen plasma-treated stripes (PSox) with a low hydrophobicity separated by non-treated areas (PS) have these properties. In this study, to guide cell growth, we developed a cell culture model using these supports and we identified the molecular factors involved in cellular orientation. When the heterogeneous supports were not coated, proteins from a serum culture medium were required for cells to line up on PSox. On the other hand, cell orientation on coated surfaces was clearly influenced by competitive adsorption of adhesive proteins such as fibronectin or collagen and anti-adhesive molecules as pluronic F68 or albumin. Attachment factors were adsorbed on PSox stripes while adsorption of anti-adhesive molecules on the most hydrophobic PS areas prevented cell adhesion or growth. Thus, we describe the preparation of a cell culture substrate that succeeded in orientating cell growth and that led to a line of cells on adhesive PSox stripes ranging from 2 to 100 microns width.

Fibronectin adsorption, conformation, and orientation on polystyrene substrates studied by radiolabeling, XPS, and ToF SIMS

Protein adsorption is widely studied by a variety of techniques, but there still is little known about protein orientation and conformation after adsorption. This probably is due to the large number of parameters involved, such as the characteristics of the surface and the structure of the protein. In this study, the adsorption of fibronectin was investigated with three different techniques: radiolabeling, X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectrometry (ToF SIMS) on polystyrene and oxidized polystyrene. The first two techniques have been widely used to study protein adsorption, allowing us to determine the amount of protein adsorbed on each surface. The ToF SIMS, however, is a technique just emerging for the study of protein adsorption. This study confirms its utility since ToF SIMS is found to be sensitive to the protein orientation and/or conformation at the surface. Indeed, the ToF SIMS peaks characteristic of the protein show differences in their reduced intensity between the two substrates. These differences, which are not detected by XPS, are attributed to different orientations and/or conformations of the protein.