Polyelectroylte complex composed of chitosan and sodium alginate for wound dressing application

Fabrication of thermo-responsive multicore microcapsules using a facile extrusion process

A process employing extrusion was used to produce multicore microcapsules composed of multiple beads. The inner beads were made from κ-carrageenan (κ-c), a thermo-responsive linear sulphated polymer whose gelling temperature ranges at 40-60 °C, depending on the concentration of κ-c polymer and the amount of potassium chloride used for gelation. The resulting beads were then enveloped by chitosan through gelation with sodium triphosphate. The pesticide ammonium glufosinate was encapsulated in the κ-c/chitosan multicore microcapsules for demonstration of controlled release of the encapsulant. It was found that in response to an external stimulus, such as elevated temperature or solar simulation, the microcapsules exhibit the gradual release of encapsulated pesticide molecules from multicore microcapsules, compared with beads only. This process of making multicore microcapsules can be extended to other polymer pairs based on applications. This work is relevant to agriculture, where the controlled-release of the pesticides or fertilizers could be triggered by the sun and/or temperature changes, thus extending the residual period of the chemicals as well as decreasing the extent of pollution by leaching of abundant chemicals.

Facile fabrication of a novel, photodetachable salecan-based hydrogel dressing with self-healing, injectable, and antibacterial properties based on metal coordination

Achieving the controllable detachment of polysaccharide-based wound dressings is challenging. In this study, a novel, photodetachable salecan-based hydrogel dressing with injectable, self-healing, antibacterial, and wound healing properties was developed using a green and facile approach. A salecan hydrogel with a uniform porous structure and water content of 90.4 % was prepared by simply mixing salecan and an Fe3+-citric acid complexing solution in an acidic D-(+)-glucono-1,5-lactone environment. Metal coordinate interactions were formed between the released Fe3+ ions and carboxyl groups on the salecan polysaccharide, inducing homogeneous gelation. Benefiting from this dynamic and reversible crosslinking, the salecan hydrogel exhibited self-healing and injectable behavior, facilitating the formation of the desired shapes in situ. The exposure of Fe3+-citric acid to UV light (365 nm) resulted in the reduction of Fe3+ to Fe2+ through photochemical reactions, enabling phototriggered detachment. Moreover, the hydrogel exhibited excellent biocompatibility and satisfactory antibacterial efficacy against Escherichia coli and Staphylococcus aureus of 72.5 % and 85.3 %, respectively. The adhesive strength of the salecan hydrogel to porcine skin was 1.06 ± 0.12 kPa. In vivo wound healing experiments further highlighted the advantages of the prepared hydrogel in alleviating the degree of wound inflammation and promoting tissue regeneration within 12 days.

Three-Dimensional Printed Cellulose for Wound Dressing Applications

Wounds are skin tissue damage due to trauma. Many factors inhibit the wound healing phase (hemostasis, inflammation, proliferation, and alteration), such as oxygenation, contamination/infection, age, effects of injury, sex hormones, stress, diabetes, obesity, drugs, alcoholism, smoking, nutrition, hemostasis, debridement, and closing time. Cellulose is the most abundant biopolymer in nature which is promising as the main matrix of wound dressings because of its good structure and mechanical stability, moisturizes the area around the wound, absorbs excess exudate, can form elastic gels with the characteristics of bio-responsiveness, biocompatibility, low toxicity, biodegradability, and structural similarity with the extracellular matrix (ECM). The addition of active ingredients as a model drug helps accelerate wound healing through antimicrobial and antioxidant mechanisms. Three-dimensional (3D) bioprinting technology can print cellulose as a bioink to produce wound dressings with complex structures mimicking ECM. The 3D printed cellulose-based wound dressings are a promising application in modern wound care. This article reviews the use of 3D printed cellulose as an ideal wound dressing and their properties, including mechanical properties, permeability aspect, absorption ability, ability to retain and provide moisture, biodegradation, antimicrobial property, and biocompatibility. The applications of 3D printed cellulose in the management of chronic wounds, burns, and painful wounds are also discussed.

Bimetallic hydrogels based on chitosan and carrageenan as promising materials for biological applications

In this study, novel crosslinked hydrogels based on chitosan (CS) and carrageenan (CRG) loaded with silver and/or copper nanoparticles (Ag/CuNPs) were prepared through a freeze-drying (thawing) process to be applied in biological applications comprising wound dressing. These hydrogels showed porous interconnected structures. The influence of the used nanoparticles (NPs) on the antibacterial properties of the CS/CRG hydrogels was explored. Antimicrobial results revealed that both CS/CRG/CuNPs, CS/CRG/AgNPs, and CS/CRG/Ag-CuNPs exhibited promising antibacterial and antifungal activity against Escherichia coli, Pseudomonas aeruginosa, Streptococcus mutans, Staphylococcus aureus, Bacillus subtilis, and Candida albicans. Moreover, CS/CRG/AgNPs, CS/CRG/CuNPs, and CS/CRG/Ag-CuNPs hydrogels showed potential antioxidant activity to be 57%, 78%, and 89%, respectively. Furthermore, cytotoxicity results against Vero normal cell line confirmed that all designed hydrogels are safe upon usage. The bimetallic CS/CRG hydrogels showed notably enhanced antibacterial properties among the as-prepared hydrogels allowing them to be a successful material upon being employed in wound dressing applications.

Immobilization Systems of Antimicrobial Peptide Ib−M1 in Polymeric Nanoparticles Based on Alginate and Chitosan

The development of new strategies to reduce the use of traditional antibiotics has been a topic of global interest due to the resistance generated by multiresistant microorganisms, including Escherichia coli, as etiological agents of various diseases. Antimicrobial peptides are presented as an alternative for the treatment of infectious diseases caused by this type of microorganism. The Ib−M1 peptide meets the requirements to be used as an antimicrobial compound. However, it is necessary to use strategies that generate protection and resist the conditions encountered in a biological system. Therefore, in this study, we synthesized alginate and chitosan nanoparticles (Alg−Chi NPs) using the ionic gelation technique, which allows for the crosslinking of polymeric chains arranged in nanostructures by intermolecular interactions that can be either covalent or non-covalent. Such interactions can be achieved through the use of crosslinking agents that facilitate this binding. This technique allows for immobilization of the Ib−M1 peptide to form an Ib−M1/Alg−Chi bioconjugate. SEM, DLS, and FT-IR were used to determine the structural features of the nanoparticles. We evaluated the biological activity against E. coli ATCC 25922 and Vero mammalian cells, as well as the stability at various temperatures, pH, and proteases, of Ib−M1 and Ib−M1/Alg-Chi. The results showed agglomerates of nanoparticles with average sizes of 150 nm; an MIC of 12.5 µM, which was maintained in the bioconjugate; and cytotoxicity values close to 40%. Stability was maintained against pH and temperature; in proteases, it was only evidenced against pepsin in Ib−M1/Alg-Chi. The results are promising with respect to the use of Ib−M1 and Ib−M1/Alg−Chi as possible antimicrobial agents.

Current Trends in Advanced Alginate-Based Wound Dressings for Chronic Wounds

Chronic wounds represent a major public health issue, with an extremely high cost worldwide. In healthy individuals, the wound healing process takes place in different stages: inflammation, cell proliferation (fibroblasts and keratinocytes of the dermis), and finally remodeling of the extracellular matrix (equilibrium between metalloproteinases and their inhibitors). In chronic wounds, the chronic inflammation favors exudate persistence and bacterial film has a special importance in the dynamics of chronic inflammation in wounds that do not heal. Recent advances in biopolymer-based materials for wound healing highlight the performance of specific alginate forms. An ideal wound dressing should be adherent to the wound surface and not to the wound bed, it should also be non-antigenic, biocompatible, semi-permeable, biodegradable, elastic but resistant, and cost-effective. It has to give protection against bacterial, infectious, mechanical, and thermal agents, to modulate the level of wound moisture, and to entrap and deliver drugs or other molecules This paper explores the roles of alginates in advanced wound-dressing forms with a particular emphasis on hydrogels, nanofibers networks, 3D-scaffolds or sponges entrapping fibroblasts, keratinocytes, or drugs to be released on the wound-bed. The latest research reports are presented and supported with in vitro and in vivo studies from the current literature.

Novel alginate-chitosan aerogel fibres for potential wound healing applications

Aerogels produced from marine polymers, such as chitosan and alginate, are of interest for wound healing applications due to their attractive properties. These properties can be the aerogel's high porosity along with the antimicrobial activity of chitosan or the capacity to provide a moist environment of alginate. The aim of this work was to develop a new route towards hybrid alginate-chitosan aerogel fibres and to evaluate their potential for wound healing applications. The influence of chitosan molecular weight and its content on the fibres characteristics was evaluated. To produce the fibres, the formation of polyelectrolyte complex hydrogels of both polymers was performed by the emulsion-gelation method. Hydrogels were converted in alcogels through a solvent exchange followed by drying with supercritical CO₂. Resulting aerogels were observed to be light-weight, fluffy mesoporous fibres with a specific surface area of 162-302 m²/g and specific pore volume of 1.41-2.49 cm³/g. Biocompatibility of the fibres was evaluated, and the result showed that they were non-cytotoxic. Bioactivity of the fibres regarding the ability to close a wound on an in vitro scale and antibacterial activity were also evaluated. Aerogel fibres presented percentages of recovered scratch area of about 75%, higher than the untreated control (~50%) and a clear antibacterial activity against Staphylococcus aureus and Klebsiella pneumoniae. The obtained results suggest that these alginate-chitosan aerogel fibres could be good candidates for wound healing applications.

Chitosan-Chondroitin sulfate based polyelectrolyte complex for effective management of chronic wounds

Acute and chronic wound remain an unresolved clinical problem among various demographic groups. Traditional marketed products focus mainly on inhibition of bacterial growth at the wound site neglecting the tissue repair, which significantly affect the healing rate. It would be highly beneficial if a wound healing material can be developed which has both antibacterial as well as tissue regenerating potential. We have prepared a polyelectrolyte complex (PEC) using chitosan (CH) and chondroitin sulfate (CS) which can form an in-situ scaffold by spontaneous mixing. The fabrication of CH-CS PEC was optimized using Quality-By-Design (QbD) approach. The prepared PEC showed very high swelling and porosity property. It was found to be non-hemolytic with good blood compatibility and low blood clotting index. It also exhibited good antibacterial activity against both gram-positive and gram-negative bacteria. The cell proliferation study exhibited good cytocompatibility and almost four-fold increase in cell density when treated with CH-CS PEC compared to control. In summary, we demonstrated that the prepared CH-CS PEC showed good blood compatibility, high antibacterial effect, and promoted wound healing potentially by stimulating fibroblast growth, making it an ideal wound dressing material.

Effect of Experimental Parameters on the Formation of Hydrogels by Polyelectrolyte Complexation of Carboxymethylcellulose, Carboxymethyl Starch, and Alginic Acid with Chitosan

Differences in morphology, pH, and electric charge of chitosan (CS) based hydrogels prepared by complexation with carboxymethylcellulose (CMC), carboxymethylated starch (CMS), and alginic acid (AA) at different polymers ratios and changing the order of addition were studied. CMC/CS and AA/CS hydrogels were amorphous and porous three-dimensional networks, with smaller pores at higher anionic polymer/CS ratios. Gelation time increased the agglomeration in the case of CMC/CS and CMS/CS gels. CMC/CS gels showed negative zeta potential values around −372 mV to −51 mV and CMS/CS gels in the range of −526 mV and −158 mV.

Release Behavior and Antibacterial Activity of Chitosan/Alginate Blends with Aloe vera and Silver Nanoparticles

Aloe vera is a perennial plant employed for medical, pharmaceutical and cosmetic purposes that is rich in amino acids, enzymes, vitamins and polysaccharides, which are responsible for its therapeutic properties. Incorporating these properties into a biopolymer film obtained from alginate and chitosan allowed the development of a novel wound dressing with antibacterial capacity and healing effects to integrate the antibacterial capacity of silver nanoparticles with the healing and emollient properties of Aloe vera gel. Three alginate-chitosan matrices were obtained through blending methods using different proportions of alginate, chitosan, the Aloe vera (AV) gel and silver nanoparticles (AgNps), which were incorporated into the polymeric system through immersion methods. Physical, chemical and antibacterial characteristics were evaluated in each matrix. Interaction between alginate and chitosan was identified using the Fourier transform infrared spectroscopy technique (FTIR), porosity was studied using scanning electron microscopy (SEM), swelling degree was calculated by difference in weight, Aloe vera gel release capacity was estimated by applying a drug model (Peppas) and finally antibacterial capacity was evaluated against S. Aureus and P. aeruginosa. Results show that alginate-chitosan (A (1:3 Chit 1/Alg 1); B (1:3 Chit 1.5/Alg 1) and C (3:1 Chit 1/Alg 1/B12)) matrices with Aloe vera (AV) gel and silver nanoparticles (AgNps) described here displayed antibacterial properties and absorption and Aloe vera release capacity making it a potential wound dressing for minor injuries.

Preparation of alginate-chitosan fibers with potential biomedical applications

The preparation of alginate-chitosan fibers, through wet spinning technique, as well as the study of their properties as a function of chitosan's molecular weight and retention time in the coagulation bath, is presented and discussed in this work. Scanning electron microscopy (SEM) revealed that the fibers presented irregular and rough surfaces, with a grooved and heavily striated morphology distributed throughout the structure. Dynamic mechanical analysis (DMA) showed that, with the exception of elongation at break, the incorporation of chitosan into the fibers improved their tensile properties. The in vitro release profile of sulfathiazole as a function of chitosan's molecular weight indicated that the fibers are viable carriers of drugs. Kinetic models showed that the release of the model drug is first-order, and the release mechanism is governed by the Korsmeyer-Peppas model. Likewise, fibers loaded with sulfathiazole showed excellent inhibition of Escherichia coli growth after an incubation time of 24h at 37 °C.

Sulfadiazine-Chitosan Conjugates and Their Polyelectrolyte Complexes with Hyaluronate Destined to the Management of Burn Wounds

In the present study polyelectrolyte complexes (PECs) based on new sulfadiazine-chitosan conjugates with sodium hyaluronate have been developed with potential use in treatment of burn wounds. The PECs were chemically characterized using Fourier Transform-Infrared Spectroscopy, Scanning Electon Microscopy and Near Infrared Chemical Imaging Technique. The swelling behavior and in vitro sulfadiazine release were also investigated. The antimicrobial activity was evaluated towards three bacterial strains: Escherichia coli, Listeria monocytogenes and Salmonella thyphymurium. The developed PECs demonstrated their antimicrobial efficiency against tested bacterial strains, the PECs containing sulfadiazine-modified chitosan being more active than PECs containing unmodified chitosan.

Chitosan as a sustainable organocatalyst: a concise overview

Increased demand for more sustainable materials and chemical processes has tremendously advanced the use of polysaccharides, which are natural biopolymers, in domains such as adsorption, catalysis, and as an alternative chemical feedstock. Among these biopolymers, the use of chitosan, which is obtained by deacetylation of natural chitin, is on the increase due to the presence of amino groups on the polymer backbone that makes it a natural cationic polymer. The ability of chitosan-based materials to form open-network, macroporous, high-surface-area hydrogels with accessible basic surface sites has enabled their use not only as macrochelating ligands for active metal catalysts and as a support to disperse nanosized particles, but also as a direct organocatalyst. This review provides a concise overview of the use of native and modified chitosan, possessing different textural properties and chemical properties, as organocatalysts. Organocatalysis with chitosan is primarily focused on carbon-carbon bond-forming reactions, multicomponent heterocycle formation reactions, biodiesel production, and carbon dioxide fixation through [3+2] cycloaddition. Furthermore, the chiral, helical organization of the chitosan skeleton lends itself to use in enantioselective catalysis. Chitosan derivatives generally display reactivity similar to homogeneous bases, ionic liquids, and organic and inorganic salts. However, the introduction of cooperative acid-base interactions at active sites substantially enhances reactivity. These functional biopolymers can also be easily recovered and reused several times under solvent-free conditions. These accomplishments highlight the important role that natural biopolymers play in furthering more sustainable chemistry.

Physical properties and biocompatibility of oligochitosan membrane film as wound dressing

BACKGROUND

The physical and biological characteristics of oligochitosan (O-C) film, including its barrier and mechanical properties, in vitro cytotoxicity and in vivo biocompatibility, were studied to assess its potential use as a wound dressing.

METHODS

Membrane films were prepared from water-soluble O-C solution blended with various concentrations of glycerol to modify the physical properties of the films. In vitro and in vivo biocompatibility evaluations were performed using primary human skin fibroblast cultures and subcutaneous implantation in a rat model, respectively.

RESULTS

Addition of glycerol significantly influenced the barrier and mechanical properties of the films. Water absorption capacity was in the range of 80%-160%, whereas water vapor transmission rate varied from 1,180 to 1,618 g/m2 per day. Both properties increased with increasing glycerol concentration. Tensile strength decreased while elongation at break increased with the addition of glycerol. O-C films were found to be noncytotoxic to human fibroblast cultures and histological examination proved that films are biocompatible.

CONCLUSION

These results indicate that the membrane film from O-C has potential application as a wound-dressing material.

Relative charge density model on chitosan-fucoidan electrostatic interaction: qualitative approach with element analysis

This paper proposes a relative charge density model of prepared chitosan-fucoidan nanoparticles (CFNs) to provide insight into an analysis of the ionic interactions in terms of polyelectrolyte complexes. Using the relative charge density model, the extent of the ionic interactions is predicted in terms of the pH (2 through 6) and used fucoidan to chitosan mass ratio (FCMR) (1:0.05 through 1:1), through which the formation of CFNs can be controlled to be ranked qualitatively according to size and stability. It was confirmed by the measurements of their zeta potentials and sizes and by the analysis of their decay with time. Moreover, the relative charge density model was validated to predict the isoelectric condition of a polyelectrolyte complexed suspension of CFNs. Elemental analysis with a proper mass-conversion showed that the ratio of the stoichiometric coefficients of sulfate groups to amino groups in CFNs formed were almost consistent to that of the sulfate groups to amino groups in a chitosan solution mixed with a fucoidan solution prior to the occurrence of polyelectrolyte complexation. In a pH 2-environment, there were locally intensive electrostatic interactions with a low yield to form sulfate group-rich CFNs. In contrast, in a pH 6-environment, extensive electrostatic interactions occurred to form sulfate group-poor CFNs with a high yield. In addition to the chitosan-amide groups, the separate yield-distribution of loaded chitosan indicated the possible involvement of positively charged amino groups in the electrostatic interactions among chitosan molecules.

Polymers in cell encapsulation from an enveloped cell perspective

In the past two decades, many polymers have been proposed for producing immunoprotective capsules. Examples include the natural polymers alginate, agarose, chitosan, cellulose, collagen, and xanthan and synthetic polymers poly(ethylene glycol), polyvinyl alcohol, polyurethane, poly(ether-sulfone), polypropylene, sodium polystyrene sulfate, and polyacrylate poly(acrylonitrile-sodium methallylsulfonate). The biocompatibility of these polymers is discussed in terms of tissue responses in both the host and matrix to accommodate the functional survival of the cells. Cells should grow and function in the polymer network as adequately as in their natural environment. This is critical when therapeutic cells from scarce cadaveric donors are considered, such as pancreatic islets. Additionally, the cell mass in capsules is discussed from the perspective of emerging new insights into the release of so-called danger-associated molecular pattern molecules by clumps of necrotic therapeutic cells. We conclude that despite two decades of intensive research, drawing conclusions about which polymer is most adequate for clinical application is still difficult. This is because of the lack of documentation on critical information, such as the composition of the polymer, the presence or absence of confounding factors that induce immune responses, toxicity to enveloped cells, and the permeability of the polymer network. Only alginate has been studied extensively and currently qualifies for application. This review also discusses critical issues that are not directly related to polymers and are not discussed in the other reviews in this issue, such as the functional performance of encapsulated cells in vivo. Physiological endocrine responses may indeed not be expected because of the many barriers that the metabolites encounter when traveling from the blood stream to the enveloped cells and back to circulation. However, despite these diffusion barriers, many studies have shown optimal regulation, allowing us to conclude that encapsulated grafts do not always follow nature's course but are still a possible solution for many endocrine disorders for which the minute-to-minute regulation of metabolites is mandatory.

Clay-chitosan nanobrick walls: completely renewable gas barrier and flame-retardant nanocoatings

Thin films prepared via a layer-by-layer (LbL) assembly of renewable materials exhibit exceptional oxygen barrier and flame-retardant properties. Positively charged chitosan (CH), at two different pH levels (pH 3 and pH 6), was paired with anionic montmorillonite (MMT) clay nanoplatelets. Thin-film assemblies prepared with CH at high pH are thicker, because if the low polymer charge density. A 30-bilayer (CH pH 6-MMT) nanocoating (~100 nm thick) reduces the oxygen permeability of a 0.5-mm-thick polylactic acid film by four orders of magnitude. This same coating system completely stops the melting of a flexible polyurethane foam, when exposed to direct flame from a butane torch, with just 10 bilayers (~30 nm thick). Cone calorimetry confirms that this coated foam exhibited a reduced peak heat-release rate, by as much as 52%, relative to the uncoated control. These environmentally benign nanocoatings could prove beneficial for new types of food packaging or a replacement for environmentally persistent antiflammable compounds.

Synergistic combination of chitosan acetate with nanoparticle silver as a topical antimicrobial: efficacy against bacterial burn infections

Chitosan and nanoparticle silver are both materials with demonstrated antimicrobial properties and have been proposed singly or in combination as constituents of antimicrobial burn dressings. Here, we show that they combine synergistically to inhibit the in vitro growth of Gram-positive methicillin-resistant Staphylococcus aureus (MRSA) and Gram-negative bacteria (Pseudomonas aeruginosa, Proteus mirabilis, and Acinetobacter baumannii), as judged by bioluminescence monitoring and isobolographic analysis, and also produce synergistic killing after 30 min of incubation, as measured by a CFU assay. The hypothesized explanation involves chitosan-mediated permeabilization of bacterial cells, allowing better penetration of silver ions into the cell. A dressing composed of freeze-dried chitosan acetate incorporating nanoparticle silver was compared with a dressing of chitosan acetate alone in an in vivo burn model infected with bioluminescent P. aeruginosa. The survival rates of mice treated with silver-chitosan or regular chitosan or left untreated were 64.3% (P = 0.0082 versus regular chitosan and P = 0.0003 versus the control), 21.4%, and 0%, respectively. Most of the fatalities occurred between 2 and 5 days postinfection. Silver-chitosan dressings effectively controlled the development of systemic sepsis, as shown by blood culture. These data suggest that a dressing combining chitosan acetate with silver leads to improved antimicrobial efficacy against fatal burn infections.

Dual therapeutic action of antibiotic-loaded nanosheets for the treatment of gastrointestinal tissue defects

An ultra-thin polymer film (nanosheet) composed of polysaccharides (i.e., polysaccharide nanosheet) provides sufficient adhesiveness, flexibility and robustness to act as an effective wound dressing. We have recently demonstrated the sealing effect of a nanosheet on a murine cecal puncture. Nevertheless, a small percentage of bacteria penetrated the nanosheet because of its ultra-thin structure. Here, we have developed an antibiotic-loaded nanosheet to inhibit bacterial penetration and investigated its therapeutic efficacy using a model of a murine cecal puncture. Tetracycline (TC) was sandwiched between a poly(vinylacetate) (PVAc) layer and the polysaccharide nanosheet (named PVAc-TC-nanosheet). Under physiological conditions, TC was released from the nanosheet for 6 h. Microscopic observation between the interface of the PVAc-TC-nanosheet and bacteria demonstrated how its potent anti-microbial effect was achieved. In vivo studies show that overlapping therapy with the PVAc-TC-nanosheet (thickness: 177 nm) significantly increases mouse survival rate after cecal puncture as well as suppressing an increase in the intraperitoneal bacterial count and leukocyte count.

Chitosan and alginate polyelectrolyte complex membranes and their properties for wound dressing application

This study investigated the characteristics and drug release properties of membranes of chitosan and alginate prepared via a casting/solvent evaporation technique. Membranes of chitosan and alginate with silver sulfadiazine as model drug incorporated in different concentrations and different membrane compositions were obtained. The polyblend solution viscosity reached to the highest at the composition polyblends of (1:1). This chitosan/alginate membranes showed pH- and ionic strength-dependent water uptake properties and had the WVTR rang from 442 to 618 g/m(2)/day. The maximum value of the dry membrane of breaking strength was 52.16 MPa and the maximum value of the wet membrane breaking elongation was 46.28%. The results of controlled release studies showed that the silver sulfadiazine release rate was the fastest when the alginate content was 50%. On the basis of the requisite physical properties, the chitosan-alginate PEC membrane can be considered for potential wound dressing or controlled release application.