A microparticle/hydrogel combination drug-delivery system for sustained release of retinoids

Assessment of glyceride-structured oleogels as an injectable extended-release delivery system of bupivacaine

This manuscript systematically assesses three different glycerides (tripalmitin, glyceryl monostearate, and a blend of mono-, di- and triesters of palmitic and stearic acids (Geleol™)) as potential gelator structuring agents of medium-chain triglyceride oil to form an oleogel-based injectable long-acting local anesthetic formulation for postoperative pain management. Drug release testing, oil-binding capacity, injection forces, x-ray diffraction, differential scanning calorimetry, and rheological testing were serially performed to characterize the functional properties of each oleogel. After benchtop assessment, the superior bupivacaine-loaded oleogel formulation was compared to bupivacaine HCl, liposomal bupivacaine, and bupivacaine-loaded medium-chain triglyceride oil in a rat sciatic nerve block model to assess in vivo long-acting local anesthetic performance. In vitro drug release kinetics were similar for all formulations, indicating that drug release rate is primarily dependent on the drug's affinity to the base oil. Glyceryl monostearate-based formulations had superior shelf-life and thermal stability. The glyceryl monostearate oleogel formulation was selected for in vivo evaluation. It was found to have a significantly longer duration of anesthetic effect than liposomal bupivacaine and was able to provide anesthesia twice as long as the equipotent bupivacaine-loaded medium-chain triglyceride oil, indicating that the increased viscosity of the oleogel provided enhanced controlled release over the drug-loaded oil alone.

Evaluating the influence of particle morphology and density on the viscosity and injectability of a novel long-acting local anesthetic suspension

Proper pain management is well understood to be one of the fundamental aspects of a healthy postoperative recovery in conjunction with mobility and nutrition. Approximately, 10% of patients prescribed opioids after surgery continue to use opioids in the long-term and as little as 10 days on opioids can result in addiction. In an effort to provide physicians with an alternative pain management technique, this work evaluates the material properties of a novel local anesthetic delivery system designed for controlled release of bupivacaine for 72 hours. The formulation utilizes solid-lipid microparticles that encapsulate the hydrophobic molecule bupivacaine in its free-base form. The lipid microparticles are suspended in a non-crosslinked hyaluronic acid hydrogel, which acts as the microparticle carrier. Two different particle manufacturing techniques, milling and hot homogenization, were evaluated in this work. The hot homogenized particles had a slower and more controlled release than the milled particles. Rheological techniques revealed that the suspension remains a viscoelastic fluid when loaded with either particle type up to 25% (w/v) particles densities. Furthermore, the shear thinning properties of the suspension media, hyaluronic acid hydrogel, were conserved when bupivacaine-loaded solid-lipid microparticles were loaded up to densities of 25% (w/v) particle loading. The force during injection was measured for suspension formulations with varying hyaluronic acid hydrogel concentrations, particle densities, particle types and particle sizes. The results indicate that the formulation viscosity is highly dependent on particle density, but hyaluronic acid hydrogel is required for lowering injection forces as well as minimizing clogging events.

Therapeutic implications of nanodrug and tissue engineering for retinal pigment epithelium-related diseases

The retinal pigment epithelium (RPE), as a single layer of cells that performs multiple functions posteriorly in the eye, is a promising target site for the prevention and treatment of several clinical diseases, including proliferative diabetic retinopathy, age-related macular degeneration, chorionic neovascularization, and retinitis pigmentosa. In recent decades, several nanodrug delivery platforms and tissue-engineered RPE have been widely developed to treat RPE-related diseases. This work summarizes the recent advances in nanoplatforms and tissue engineering scaffolds developed in these fields. The diseases associated with pathological RPE and their common therapy strategies are first introduced. Then, the recent progress made with a variety of drug delivery systems is presented, with an emphasis on the modification strategies of nanomaterials for targeted delivery. Tissue engineering-mediated RPE transplantation for treating these diseases is subsequently described. Finally, the clinical translation challenges in these fields are discussed in depth. This article will offer readers a better understanding of emerging nanotechnology and tissue engineering related to the treatment of RPE-related diseases and could facilitate their widespread use in experiments in vivo and in clinical applications.

Biologics and their delivery systems: Trends in myocardial infarction

Cardiovascular disease is the leading cause of death around the world, in which myocardial infarction (MI) is a precipitating event. However, current therapies do not adequately address the multiple dysregulated systems following MI. Consequently, recent studies have developed novel biologic delivery systems to more effectively address these maladies. This review utilizes a scientometric summary of the recent literature to identify trends among biologic delivery systems designed to treat MI. Emphasis is placed on sustained or targeted release of biologics (e.g. growth factors, nucleic acids, stem cells, chemokines) from common delivery systems (e.g. microparticles, nanocarriers, injectable hydrogels, implantable patches). We also evaluate biologic delivery system trends in the entire regenerative medicine field to identify emerging approaches that may translate to the treatment of MI. Future developments include immune system targeting through soluble factor or chemokine delivery, and the development of advanced delivery systems that facilitate the synergistic delivery of biologics.

Subclinical effects of adapalene-benzoyl peroxide: a prospective in vivo imaging study on acne micromorphology and transfollicular delivery

BACKGROUND

Adapalene-benzoyl peroxide (A-BPO) is a first-line topical treatment for acne vulgaris. In vivo reflectance confocal microscopy (RCM) and optical coherence tomography (OCT) detect micromorphological changes over time and visualize transfollicular delivery.

OBJECTIVES

To visualize temporal, subclinical effects of A-BPO on acne micromorphology using RCM and OCT, and evaluate their impact on transfollicular delivery of microparticulate carrier systems.

METHODS

Fifteen patients with mild to moderate acne received a 6-week course of A-BPO. Micromorphological changes were evaluated at time 0, 3 and 6 weeks with RCM (n = 1190 images) and OCT (n = 210 scans). Transfollicular delivery of microparticles was assessed at baseline and week 6.

RESULTS

In vivo imaging visualized steady normalization of skin micromorphology in response to A-BPO over 6 weeks, including decreased hyperkeratinization of follicular borders (RCM median decrease -71.2%, P < 0.05), reduced intrafollicular keratinous content (RCM median decrease -47.7%, P < 0.05) and increased epidermal thickness (OCT median increase of 25.25%, P < 0.05). Imaging visualized microparticles in the follicular unit. Despite a visible reduction in keratin and sebum, transfollicular microparticle delivery appeared unaffected.

CONCLUSIONS

Reflectance confocal microscopy and OCT detect A-BPO-induced changes in micromorphology and visualize transfollicular microparticle delivery. Keratolysis and sebolysis did not have a measurable effect on transfollicular delivery of microparticles.

Entrapping bupivacaine-loaded emulsions in a crosslinked-hydrogel increases anesthetic effect and duration in a rat sciatic nerve block model

The purpose of this research was to evaluate a novel long-acting bupivacaine delivery system for control of postoperative pain. Bupivacaine-loaded lipid emulsion (BLE) droplets were created by high-speed homogenization. The BLE droplets were then entrapped into a crosslinked-hyaluronic acid hydrogel system to create an injectable composite gel formulation (HA-BLE). Dynamic light scattering, rheological, and drug release techniques were used to characterize the formulations. A rat sciatic nerve block with a thermal nociceptive assay was used to evaluate the anesthetic effect in comparison to controls, bupivacaine HCl and liposomal bupivacaine. The BLE droplets had a zeta potential, droplet size, and polydispersity index of -40.8 ± 0.66 mV, 299 ± 1.77 nm, and 0.409 ± 0.037, respectively. The HA-BLE formulation could be injected through 25 g needles and had an elastic modulus of 372 ± 23.7 Pa. Approximately 80% and 100% of bupivacaine was released from the BLE and HA-BLE formulations by 20 and 68 h, respectively. The HA-BLE formulation had a 5-times greater anesthetic area under the curve and an anesthetic duration that was twice as long as controls. Results indicate that incorporating the BLEs into the hydrogel significantly increased anesthetic effect by protecting the BLE droplets from the in vivo environment.

Ocular Drug Delivery: A Special Focus on the Thermosensitive Approach

The bioavailability of ophthalmic therapeutics is reduced because of the presence of physiological barriers whose primary function is to hinder the entry of exogenous agents, therefore also decreasing the bioavailability of locally administered drugs. Consequently, repeated ocular administrations are required. Hence, the development of drug delivery systems that ensure suitable drug concentration for prolonged times in different ocular tissues is certainly of great importance. This objective can be partially achieved using thermosensitive drug delivery systems that, owing to their ability of changing their state in response to temperature variations, from room to body temperature, may increase drug bioavailability. In the case of topical instillation, in situ forming gels increase pre-corneal drug residence time as a consequence of their enhanced adhesion to the corneal surface. Otherwise, in the case of intraocular and periocular, i.e., subconjunctival, retrobulbar, peribulbar administration, among others, they have the undoubted advantage of being easily injectable and, owing to their sudden thickening at body temperature, have the ability to form an in situ drug reservoir. As a result, the frequency of administration can be reduced, also favoring the patient’s adhesion to therapy. In the main section of this review, we discuss some of the most common treatment options for ocular diseases, with a special focus on posterior segment treatments, and summarize the most recent improvement deriving from thermosensitive drug delivery strategies. Aside from this, an additional section describes the most widespread in vitro models employed to evaluate the functionality of novel ophthalmic drug delivery systems.

Drug delivery systems for prolonged duration local anesthesia

Numerous drug delivery systems have been applied to the problem of providing prolonged duration local anesthesia (PDLA). Here we review the rationale for PDLA, the desirable features for and important attributes of such systems, and specific examples that have been developed.

Advanced drug delivery and targeting technologies for the ocular diseases

INTRODUCTION

Ocular targeted therapy has enormously been advanced by implementation of new methods of drug delivery and targeting using implantable drug delivery systems (DDSs) or devices (DDDs), stimuli-responsive advanced biomaterials, multimodal nanomedicines, cell therapy modalities and medical bioMEMs. These technologies tackle several ocular diseases such as inflammation-based diseases (e.g., scleritis, keratitis, uveitis, iritis, conjunctivitis, chorioretinitis, choroiditis, retinitis, retinochoroiditis), ocular hypertension and neuropathy, age-related macular degeneration and mucopolysaccharidosis (MPS) due to accumulation of glycosaminoglycans (GAGs). Such therapies appear to provide ultimate treatments, even though much more effective, yet biocompatible, noninvasive therapies are needed to control some disabling ocular diseases/disorders.

METHODS

In the current study, we have reviewed and discussed recent advancements on ocular targeted therapies.

RESULTS

On the ground that the pharmacokinetic and pharmacodynamic analyses of ophthalmic drugs need special techniques, most of ocular DDSs/devices developments have been designed to localized therapy within the eye. Application of advanced DDSs such as Subconjunctival insert/implants (e.g., latanoprost implant, Gamunex-C), episcleral implant (e.g., LX201), cationic emulsions (e.g., Cationorm™, Vekacia™, Cyclokat™), intac/punctal plug DDSs (latanoprost punctal plug delivery system, L-PPDS), and intravitreal implants (I-vitaion™, NT-501, NT- 503, MicroPump, Thethadur, IB-20089 Verisome™, Cortiject, DE-102, Retisert™, Iluvein™ and Ozurdex™) have significantly improved the treatment of ocular diseases. However, most of these DDSs/devices are applied invasively and even need surgical procedures. Of these, use of de novo technologies such as advanced stimuli-responsive nanomaterials, multimodal nanosystems (NSs)/nanoconjugates (NCs), biomacromolecualr scaffolds, and bioengineered cell therapies need to be further advanced to get better compliance and higher clinical impacts.

CONCLUSION

Despite mankind successful battle on ocular diseases, our challenge will continue to battle the ocular disease that happen with aging. Yet, we need to understand the molecular aspects of eye diseases in a holistic way and develop ultimate treatment protocols preferably as non-invasive systems.

Integration of drug, protein, and gene delivery systems with regenerative medicine

Regenerative medicine has the potential to drastically change the field of health care from reactive to preventative and restorative. Exciting advances in stem cell biology and cellular reprogramming have fueled the progress of this field. Biochemical cues in the form of small molecule drugs, growth factors, zinc finger protein transcription factors and nucleases, transcription activator-like effector nucleases, monoclonal antibodies, plasmid DNA, aptamers, or RNA interference agents can play an important role to influence stem cell differentiation and the outcome of tissue regeneration. Many of these biochemical factors are fragile and must act intracellularly at the molecular level. They require an effective delivery system, which can take the form of a scaffold (e.g., hydrogels and electrospun fibers), carrier (viral and nonviral), nano- and microparticle, or genetically modified cell. In this review, we will discuss the history and current technologies of drug, protein, and gene delivery in the context of regenerative medicine. Next, we will present case examples of how delivery technologies are being applied to promote angiogenesis in nonhealing wounds or prevent angiogenesis in age related macular degeneration. Finally, we will conclude with a brief discussion of the regulatory pathway from bench to bedside for the clinical translation of these novel therapeutics.

3D-Printed Drug/Cell Carrier Enabling Effective Release of Cyclosporin A for Xenogeneic Cell-Based Therapy

Systemic administration of the immunosuppressive drug cyclosporin A (CsA) is frequently associated with a number of side effects; therefore, sometimes it cannot be applied in sufficient dosage after allogeneic or xenogeneic cell transplantation. Local delivery is a possible solution to this problem. We used 3D printing to develop a CsA-loaded 3D drug carrier for the purpose of local and sustained delivery of CsA. The carrier is a hybrid of CsA-poly(lactic-co-glycolic acid) (PLGA) microsphere-loaded hydrogel and a polymeric framework so that external force can be endured under physiological conditions. The expression of cytokines, which are secreted by spleen cells activated by Con A, and which are related to immune rejection, was significantly decreased in vitro by the released CsA from the drug carrier. Drug carriers seeded with xenogeneic cells (human lung fibroblast) were subcutaneously implanted into the BALB/c mouse. As a result, T-cell-mediated rejection was also significantly suppressed for 4 weeks. These results show that the developed 3D drug carrier can be used as an effective xenogeneic cell delivery system with controllable immunosuppressive drugs for cell-based therapy.

Drug-eluting nasal implants: formulation, characterization, clinical applications and challenges

Chronic inflammation and infection of the nasal sinuses, also referred to as Chronic Rhinosinusitis (CRS), severely affects patients’ quality of life. Adhesions, ostial stenosis, infection and inflammation relapses complicate chronic sinusitis treatment strategies. Drug-eluting stents, packings or implants have been suggested as reasonable alternatives for addressing these concerns. This article reviewed potential drug candidates for nasal implants, formulation methods/optimization and characterization methods. Clinical applications and important considerations were also addressed. Clinically-approved implants (Propel™ implant, the Relieva stratus™ MicroFlow spacer, and the Sinu-Foam™ spacer) for CRS treatment was an important focus. The advantages and limitations, as well as future considerations, challenges and the need for additional research in the field of nasal drug implant development, were discussed.

Vitamin A derivatives as treatment options for retinal degenerative diseases

The visual cycle is a sequential enzymatic reaction for vitamin A, all-trans-retinol, occurring in the outer layer of the human retina and is essential for the maintenance of vision. The central source of retinol is derived from dietary intake of both retinol and pro-vitamin A carotenoids. A series of enzymatic reactions, located in both the photoreceptor outer segment and the retinal pigment epithelium, transform retinol into the visual chromophore 11-cis-retinal, regenerating visual pigments. Retina specific proteins carry out the majority of the visual cycle, and any significant interruption in this sequence of reactions is capable of causing varying degrees of blindness. Among these important proteins are Lecithin:retinol acyltransferase (LRAT) and retinal pigment epithelium-specific 65-kDa protein (RPE65) known to be responsible for esterification of retinol to all-trans-retinyl esters and isomerization of these esters to 11-cis-retinal, respectively. Deleterious mutations in these genes are identified in human retinal diseases that cause blindness, such as Leber congenital amaurosis (LCA) and retinitis pigmentosa (RP). Herein, we discuss the pathology of 11-cis-retinal deficiency caused by these mutations in both animal disease models and human patients. We also review novel therapeutic strategies employing artificial visual chromophore 9-cis-retinoids which have been employed in clinical trials involving LCA patients.

Intervisit variability of visual parameters in Leber congenital amaurosis caused by RPE65 mutations

PURPOSE

To determine the intervisit variability of kinetic visual fields and visual acuity in patients with Leber congenital amaurosis (LCA) caused by mutations in the RPE65 (Retinal Pigment Epithelium-specific protein 65kDa) gene.

METHODS

RPE65-LCA patients (n = 20; ages 11-40 years) were studied on at least two visits separated by fewer than 120 days using Goldmann visual field (GVF) and ETDRS visual acuity (VA) in a retrospective review. GVFs were quantified by computing the spherical coordinates of their vertices and calculating the solid angle subtended, and reported in normalized solid-angle units (nsu) as a percentage of average normal field extent. Repeatability coefficients were calculated using 95% confidence intervals on log(10)-converted variables.

RESULTS

Visual field extents in RPE65-LCA spanned a wide range from 4 to 95 nsu. The repeatability coefficient was 0.248 (log(10)nsu), suggesting cutoffs for significant change (in nsu) of +77% for improvement and -44% for worsening. VA in RPE65-LCA ranged from logMAR = 0.14 to 1.96 (20/40 to 20/1250). The repeatability coefficient was 0.170 (logMAR) (±8.5 ETDRS letters). Comparisons with published studies of ungenotyped retinitis pigmentosa showed that the RPE65-LCA patients had higher variability in kinetic field extent. VA variability in RPE65-LCA fell within reported results for retinitis pigmentosa.

CONCLUSIONS

Variability data for GVF and VA are provided to permit interpretation of the significance of increases and decreases of these functional outcomes in ongoing and planned clinical trials of therapy for LCA caused by RPE65 mutations.