Near-Infrared Spectroscopy Using a Supercontinuum Laser: Application to Long Wavelength Transmission Spectra of Barley Endosperm and Oil

Advances in mid-infrared spectroscopy enabled by supercontinuum laser sources

Supercontinuum sources are all-fiber pulsed laser-driven systems that provide high power spectral densities within ultra-broadband spectral ranges. The tailored process of generating broadband, bright, and spectrally flat supercontinua-through a complex interplay of linear and non-linear processes-has been recently pushed further towards longer wavelengths and has evolved enough to enter the field of mid-infrared (mid-IR) spectroscopy. In this work, we review the current state and perspectives of this technology that offers laser-like emission properties and instantaneous broadband spectral coverage comparable to thermal emitters. We aim to go beyond a literature review. Thus, we first discuss the basic principles of supercontinuum sources and then provide an experimental part focusing on the quantification and analysis of intrinsic emission properties such as typical power spectral densities, brightness levels, spectral stability, and beam quality (to the best of the authors' knowledge, the M² factor for a mid-IR supercontinuum source is characterized for the first time). On this basis, we identify key competitive advantages of these alternative emitters for mid-IR spectroscopy over state-of-the-art technologies such as thermal sources or quantum cascade lasers. The specific features of supercontinuum radiation open up prospects of improving well-established techniques in mid-IR spectroscopy and trigger developments of novel analytical methods and instrumentation. The review concludes with a structured summary of recent advances and applications in various routine mid-IR spectroscopy scenarios that have benefited from the use of supercontinuum sources.

Influence of pulse duration and repetition rate on mid-infrared cascaded supercontinuum

We experimentally investigate the influence of varying pulse parameters on the spectral broadening, power spectral density, and relative intensity noise of mid-infrared (mid-IR) in-amplifier cascaded supercontinuum generation (SCG) by varying the pulse duration (35 ps, 1 ns, 3 ns) and repetition rate (100, 500, 1000 kHz). The system is characterized at the output of the erbium-ytterbium-doped in-amplifier SCG stage, the thulium/germanium power redistribution stage, and the passive ZBLAN fiber stage. In doing so, we demonstrate that the output of the later stages depends critically on the in-amplifier stage, and relate this to the onset of modulation instability.

Sensitive multi-species trace gas sensor based on a high repetition rate mid-infrared supercontinuum source

We present a multi-species trace gas sensor based on a high-repetition-rate mid-infrared supercontinuum source, in combination with a 30 m multipass absorption cell, and a scanning grating spectrometer. The output of the spectrometer is demodulated by a digital lock-in amplifier, referenced to the repetition rate of the supercontinuum source. This improved the detection sensitivity of the system by a factor 5, as compared to direct baseband operation. The spectrometer provides a spectral coverage of 950 cm^-1 (between 2.85-3.90 µm) with a resolution of 2.5 cm^-1 in 100 ms. It can achieve noise equivalent detection limits in the order of 100 ppbv Hz^-1/2 for various hydrocarbons, alcohols, and aldehydes.

In-amplifier and cascaded mid-infrared supercontinuum sources with low noise through gain-induced soliton spectral alignment

The pulse-to-pulse relative intensity noise (RIN) of near-infrared (near-IR) in-amplifier supercontinuum (SC) sources and mid-IR cascaded SC sources was experimentally and numerically investigated and shown to have significantly lowered noise due to the fundamental effect of gain-induced soliton-spectral alignment. The mid-IR SC source is based on a near-IR in-amplifier SC pumping a cascade of thulium-doped and ZBLAN fibers. We demonstrate that the active thulium-doped fiber not only extend the spectrum, but also to significantly reduce the RIN by up to 22% in the long wavelength region above 2 μm. Using numerical simulations, we demonstrate that the noise reduction is the result of an interplay between absorption-emission processes and nonlinear soliton dynamics leading to the soliton-spectral alignment. In the same way we show that the RIN of the near-IR in-amplifier SC source is already significantly reduced because the spectral broadening takes place in an active fiber that also introduces soliton-spectral alignment. We further show that the low noise properties are transferred to the subsequent fluoride SC, which has a RIN lower than 10% (5%) in a broad region from 1.1-3.6 μm (1.4-3.0 μm). The demonstrated low noise significantly improves the applicability of these broadband sources for mid-IR imaging and spectroscopy.

Portable Spectroscopy

Until very recently, handheld spectrometers were the domain of major analytical and security instrument companies, with turnkey analyzers using spectroscopic techniques from X-ray fluorescence (XRF) for elemental analysis (metals), to Raman, mid-infrared, and near-infrared (NIR) for molecular analysis (mostly organics). However, the past few years have seen rapid changes in this landscape with the introduction of handheld laser-induced breakdown spectroscopy (LIBS), smartphone spectroscopy focusing on medical diagnostics for low-resource areas, commercial engines that a variety of companies can build up into products, hyphenated or dual technology instruments, low-cost visible-shortwave NIR instruments selling directly to the public, and, most recently, portable hyperspectral imaging instruments. Successful handheld instruments are designed to give answers to non-scientist operators; therefore, their developers have put extensive resources into reliable identification algorithms, spectroscopic libraries or databases, and qualitative and quantitative calibrations. As spectroscopic instruments become smaller and lower cost, "engines" have emerged, leading to the possibility of being incorporated in consumer devices and smart appliances, part of the Internet of Things (IOT). This review outlines the technologies used in portable spectroscopy, discusses their applications, both qualitative and quantitative, and how instrument developers and vendors have approached giving actionable answers to non-scientists. It outlines concerns on crowdsourced data, especially for heterogeneous samples, and finally looks towards the future in areas like IOT, emerging technologies for instruments, and portable hyphenated and hyperspectral instruments.

Long wavelength near-infrared transmission spectroscopy of barley seeds using a supercontinuum laser: Prediction of mixed-linkage beta-glucan content

A supercontinuum laser was used to perform the first transmission measurements on intact seeds with long wavelength near-infrared spectroscopy. A total of 105 barley seeds from five different barley genotypes (Bomi, lys5.f, lys5.g, lys16 and lys95) were measured from 2275 to 2375 nm. The mixed-linkage (1→3,1→4)-β-D-glucan (BG) and protein content was measured with wet chemical analysis for each single seed. A partial least squares model correlated the BG % (w/w) with the spectral measurements with a R²_CV and R²_PRED of 0.83 and 0.90, respectively. The predictive model for BG could be improved by averaging spectra from the same seed and by replacing the individual seed BG content with the average BG of each barley genotype.

Versatile dispersion characteristics of water solution of glycerine in selective filling of holes in photonic crystal fibers

Using a glycerine-water solution with various concentrations, we investigate the dispersion characteristics of photonic crystal fibers by selective filling of holes. Our analysis is based on a simple but accurate semi-vectorial solution of Helmholtz's equation by the finite difference method devised with a mode-field convergence technique and crosschecked by results with those from a deeply involved multipole method. Significantly, a better ultra-flatness but near-zero group velocity dispersion is revealed with a 20% glycerine-water solution that is superior to pure water of a very recent case when the holes of the first ring of the fiber are filled. This versatile effect in management of holes of identical diameter with liquid is expected to play a guiding role in studies of supercontinuum generation.