Dentin-cement interfacial interaction: calcium silicates and polyalkenoates

Evaluation of the physical properties of bromelain-modified biodentine for direct pulp capping

BACKGROUND

This study aims to evaluate the compressive strength, solubility, radiopacity, and flow of Bromelain (BR)-modified Biodentine (BD) for direct pulp capping (DPC). This is suggested to determine the impact of BR on the physical properties of BD.

METHODS

Eighty samples were prepared according to the ISO and ADA specifications and evaluated for compressive strength, solubility, radiopacity, and flow. The compressive strength was evaluated at 24 h and 21 days via a universal testing machine. The solubility was determined by weight loss after 24-hours immersion in deionized water. Radiopacity was assessed via X-ray with aluminum step-wedges, and flow was measured by the diameter of the discs under a standard weight. Independent sample t-tests were used to statistically assess the data. A significance level of 5% was considered.

RESULTS

The compressive strength was 41.08 ± 1.84 MPa for BD and 40.92 ± 1.80 MPa for BR + BD after 24 h, and 88.93 ± 3.39 MPa for BD and 87.92 ± 3.76 MPa for BR + BD after 21 days, with no significant differences. Solubility was slightly greater in the BR + BD (2.75 ± 0.10%) compared to BD (2.62 ± 0.25%), but not significantly different. The radiopacity was similar between BD (2.82 ± 0.11 mm) and BR + BD (2.73 ± 0.10 mm). BR + BD resulted in significantly greater flow (9.99 ± 0.18 mm) than did BD (9.65 ± 0.27 mm) (p ≤ 0.05).

CONCLUSION

BR-modified BD maintains BD's physical properties, with improved flow, making it a promising DPC agent that warrants further study.

Comparison of remineralization ability of tricalcium silicate and of glass ionomer cement on residual dentin: an in vitro study

OBJECTIVE

This study aimed to compare the remineralization effects of a calcium silicate-based cement (Biodentine) and of a glass ionomer cement (GIC: Fuji IX) on artificially demineralized dentin.

METHODS

Four standard cavities were prepared in dentin discs prepared from 34 extracted sound human third molars. In each disc, one cavity was covered with an acid-resistant varnish before demineralization (Group 1). The specimens were soaked in a chemical demineralization solution for 96 h to induce artificial carious lesions. Thereafter, one cavity each was filled with Biodentine (Group 2) and GIC (Group 3), respectively, and one carious lesion was left unrestored as a negative control (Group 4). Next, specimens were immersed in simulated body fluid (SBF) for 21 days. After cross-sectioning the specimens, the Ca/P ratio was calculated in each specimen by using scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX). Finally, data were analyzed using repeated-measures ANOVA with post-hoc Bonferroni correction.

RESULTS

Both cement types induced dentin remineralization as compared to Group 4. The Ca/P ratio was significantly higher in Group 2 than in Group 3 (p < 0.05).

CONCLUSION

The dentin lesion remineralization capability of Biodentine is higher than that of GIC, suggesting the usefulness of the former as a bioactive dentin replacement material.

CLINICAL RELEVANCE

Biodentine has a higher remineralization ability than that of GIC for carious dentin, and its interfacial properties make it a promising bioactive dentin restorative material.

Efficacy of root-end filling techniques using premixed putty type bioceramic cements: an ex vivo study

OBJECTIVES

Currently, premixed putty-type bioceramic cements (PPBCs) have become popular materials for root-end fillings. This study investigated three root-end filling techniques using PPBCs and calcium silicate-based sealers including EDTA pretreatment.

MATERIALS AND METHODS

Ninety root segments were prepared and standardized with an artificial fin and lateral canal, and assigned to three groups (n = 30). Root-end fillings were placed using BC-RRM Putty alone (Group PA), injection of BC sealer followed by BC-RRM Putty (Lid Technique: Group LT) or BC-RRM Putty with BC sealer coating (Deep putty packing technique: Group DP). Half of each group was pretreated with 17% EDTA. The radiographic images of the specimens were assessed by five graders and push-out bond strength tests were conducted. The data were analyzed with a general linear model including two-way ANOVA and chi-square test at a significance level of 5%.

RESULTS

DP approach demonstrated significantly higher bond strength than LT (P < 0.05). However, there was no statistically significant difference in bond strength between PA and either DP or LT. EDTA pretreatment had no significant effect on push-out bond strength. Radiographically, for the main canal, PA and DP scored significantly higher than LT. In the fin, PA scored significantly higher than others (P < 0.05).

CONCLUSION

Our study highlights variations in root-end filling techniques. Injecting a bulk of bioceramic sealer before the placement of PPBCs may reduce bond strength and radiopacity. The application of PPBCs alone or in the deep putty technique demonstrates potential for favorable outcomes. EDTA pretreatment did not enhance bond-strength.

CLINICAL RELEVANCE

Careful selection and application of bioceramic materials and techniques in root-end fillings may influence the outcome of endodontic root-end surgery. When PPBCs and calcium silicate-based sealers are used together for root-end fillings, sealer followed by deep putty application may offer improved bond strength and radiographic fill compared to the lid technique.

Effects of ethylenediaminetetraacetic acid, citric acid, and etidronic acid on root dentin mineral content and bond strength of a bioceramic-based sealer: A scanning electron microscopy-energy dispersive spectroscopy study

Background

This study assessed the impact of chelating agents, 17% ethylenediaminetetraacetic acid (EDTA), 10% citric acid (CA), and 18% etidronic acid (HEDP), on root dentin mineral content. Scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) was applied to analyze changes, and the push-out bond strength test was used to measure dentin adhesion of Well-Root ST, a bioceramic root canal sealer.

Methods

A total of 80 extracted single-rooted lower premolar teeth were included in this study and randomly divided into four groups (n=20): group 1 (17% EDTA), group 2 (10% CA), group 3 (18% HEDP), and group 4 (distilled water, control). After irrigation and drying, SEM-EDS was applied to analyze eight samples from each group at coronal, middle, and apical root regions for mineral content and SEM images. The remaining 12 samples underwent a push-out bond strength test using Well-Root ST sealer and gutta-percha. Kruskal-Wallis and Dunn's tests were used for statistical analyses.

Results

Statistically significant differences were found between groups (P<0.05). SEM-EDS showed significant differences in C, O, Ca, P, and Ca/P content, with no significant differences in Na and Mg. Push-out bond strength was significantly higher in the 17% EDTA, 10% CA, and 18% HEDP groups compared to the control group, with no significant differences between chelating agents.

Conclusion

Chelating agents altered root dentin mineral content and improved the adhesive properties of the bioceramic sealer. These findings highlight the importance of considering the selection and use of chelating agents in the clinical practice for root canal treatment.

Retreatment Strategies for Cases Containing Calcium Silicate-Based Root Canal Sealers: A Comprehensive Review

This review explores the field of retreatment strategies for cases filled with calcium silicate-based root canal sealers. Since the introduction of calcium silicate-based materials in dentistry, calcium silicate-based root canal sealers have become popular among dentists because of their biocompatibility, bioactivity, and sealing ability. Therefore, effective retreatment strategies are indispensable. This article aims to identify the challenges associated with the removal of calcium silicate-based sealers themselves and removal of gutta-percha with the sealers during retreatment, evaluate current techniques and materials, and provide future directions for research in this field. Regarding the strategies of removal of root canal sealers, calcium silicate-based sealers are still relatively new materials for clinicians compared with traditional sealers such as epoxy- or eugenol-based sealers. First, no clinically established solvents have been reported. Second, calcium silicate-based sealers are currently utilized by clinicians in either the cold sealer-based technique or the warm vertical condensation technique. Third, the setting process of calcium silicate-based sealers generates byproducts, primarily calcium hydroxide and secondarily hydroxyapatite, that could interact with dentine. Lastly, there is a lack of clinical studies evaluating the efficacy of retreatment protocols for teeth filled with calcium silicate-based sealers. Therefore, it is important to investigate the chemo-mechanical properties of calcium silicate-based sealers themselves and their reactions to solvents and/or mechanical instruments and identify the interfacial properties of calcium silicate-based sealers with respect to dentine and gutta-percha. In addition, researchers in the clinical field need to actively gather and report data on retreatments of teeth filled with calcium silicate-based sealers.

Glass ionomer cement with calcium-releasing particles: Effect on dentin mineral content and mechanical properties

OBJECTIVE

to evaluate the effect a glass ionomer cement (GIC) containing hydroxyapatite (HAp) or calcium silicate (CaSi) particles on mineral content and mechanical properties of demineralized dentin. Ion release and compressive strength (CS) of the cements were also evaluated.

METHODS

GIC (Fuji 9 Gold Label, GC), GIC+ 5%HAp and GIC+ 5%CaSi (by mass) were evaluated. Ion release was determined by induced coupled plasma optical emission spectroscopy (Ca2+/Sr2+) or ion-specific electrode (F-) (n = 3). A composite (Filtek Z250, 3 M ESPE) was used as control in remineralization tests. Demineralized dentin discs were kept in contact with materials in simulated body fluid (SBF) at 37 °C for eight weeks. Mineral:matrix ratio (MMR) was determined by ATR-FTIR spectroscopy (n = 5). Dentin hardness (H) and elastic modulus (E) were determined by nanoindentation (n = 10). CS was tested after 24 h and 7d in deionized water (n = 12). Data were analyzed by ANOVA/Tukey test (α = 0.05).

RESULTS

Ca2+ and Sr2+ release was higher for the modified materials (p < 0.05). Only GIC+ 5%HAp showed higher F- release than the control (p < 0.05). All groups showed statistically significant increases in MMR, with no differences among them after 8 weeks (p > 0.05). No differences in dentin H or E were observed among groups (p > 0.05). HAp-modified GIC showed increased initial CS, while adding CaSi had the opposite effect (p < 0.05). After 7 days, GIC+ 5%CaSi presented lower CS in relation to control and GIC+ 5%HAp (p < 0.05).

SIGNIFICANCE

GIC modification with HAp or CaSi affected CS and increased ion release; however, none of the groups showed evidence of dentin remineralization in comparison to the negative control.

Effect of a calcium silicate cement and experimental glass ionomer cements containing calcium orthophosphate particles on demineralized dentin

OBJECTIVE

The study aims to evaluate the effect of a glass ionomer cement (GIC; Fuji 9 Gold Label, GC) with added calcium orthophosphate particles and a calcium silicate cement (CSC; Biodentine, Septodont) regarding ion release, degradation in water, mineral content, and mechanical properties of demineralized dentin samples.

METHODS

GIC, GIC + 5% DCPD (dicalcium phosphate dihydrate), GIC + 15% DCPD, GIC + 5% β-TCP (tricalcium phosphate), GIC + 15% β-TCP (by mass), and CSC were evaluated for Ca2+/Sr2+/F- release in water for 56 days. Cement mass loss was evaluated after 7-day immersion in water. Partially demineralized dentin disks were kept in contact with materials while immersed in simulated body fluid (SBF) at 37 °C for 56 days. The "mineral-to-matrix ratio" (MMR) was determined by ATR-FTIR spectroscopy. Dentin hardness and elastic modulus were obtained by nanoindentation. Samples were observed under scanning and transmission electron microscopy. Data were analyzed by ANOVA/Tukey test (α = 0.05).

RESULTS

Ca2+ release from CSC and GIC (μg/cm2) were 4737.0 ± 735.9 and 13.6 ± 1.6, respectively. In relation to the unmodified GIC, the addition of DCPD or β-TCP increased ion release (p < 0.001). Only the dentin disks in contact with CSC presented higher MMR (p < 0.05) and mechanical properties than those restored with a resin composite used as control (p < 0.05). Mass loss was similar for GIC and CSC; however, the addition of DCPD or β-TCP increased GIC degradation (p < 0.05).

CONCLUSION

Despite the increase in ion release, the additional Ca2+ sources did not impart remineralizing capability to GIC. Both unmodified GIC and CSC showed similar degradation in water.

CLINICAL RELEVANCE

CSC was able to promote dentin remineralization.

In vitro comparative evaluation of apical leakage using a bioceramic sealer with three different obturating techniques: A glucose leakage model

Context

Bioceramic sealers have improved sealing ability by forming an interfacial apatite layer that chemically bonds the sealer and radicular dentin thus decrease apical leakage.

Aim

This study aims to evaluate and compare the apical leakage of Cerafill RCS bioceramic sealer and gutta percha when used with three different obturating techniques.

Materials and Methods

Thirty-four extracted single-rooted premolars were decoronated and prepared up to size F3. Then, the specimens were randomly divided into 3 experimental groups (n = 10) cold lateral obturation technique, warm vertical obturation technique, single-cone obturation technique, positive and negative control groups (n = 2), according to the obturation technique used along with a bioceramic sealer. To evaluate apical leakage, all specimens were mounted in a glucose leakage model and assessed at 7 and 14 days using an ultraviolet-visible spectrophotometer.

Statistical Analysis

The results were subjected to ANOVA/Kruskal-Wallis ANOVA; followed by post hoc analysis using Bonferroni correction.

Results

Significant differences were found in the cumulative leakage of all the three experimental groups. Significantly higher leakage was found in groups obturated using single-cone obturation technique as compared to warm vertical compaction technique at both 7 and 14 days.

Conclusions

Warm vertical compaction showed a better sealing result than single-cone obturation techniques at all observation periods.

A paradigm shift from calcium hydroxide to bioceramics in direct pulp capping: A narrative review

For many years, calcium hydroxide (CH) was the preferred material for direct pulp capping (DPC), occupying an elevated position. The collapse of this paradigm is due to the emergence of bioceramics with less pulpal inflammation and superior mineralization abilities than CH. The goal of the current article was directed to: (1) review the history of DPC "the idea of an exposed pulp as a hopeless organ has given way to one of healing and optimism," (2) classify the bioceramics in dentistry, and (3) explain and compare the mechanism by which dentin barriers for CH and bioceramics are formed. A comprehensive literature search of the database was conducted using PubMed, Google Scholar, and Scopus utilizing the following terms: Biodentine, calcium hydroxide, calcium aluminate, calcium phosphate, calcium silicate, direct pulp capping, NeoMTA Plus, Quick-Set2, and TotalFill. Reference mining of the selected publications was utilized to discover other studies and strengthen the results. Only works written in English were taken into consideration, and there were no restrictions on the year of publication. Bioceramic materials might be used as an intriguing substitute for CH. Compared to CH, they induced more positive pulpal reactions.

Effect of radiation therapy on fracture resistance of simulated immature teeth submitted to root reinforcement

BACKGROUND

The literature is scanty regarding the effect of radiation therapy (RT) on the mechanical properties of immature permanent teeth.

AIM

To evaluate the effect of RT on the fracture resistance of simulated immature teeth submitted to different types of root reinforcement.

DESIGN

Sixty-four human teeth simulating the Cvek stage 3 of root development were distributed into eight groups (n = 8), according to exposure or not to RT (70 Gy) and the root reinforcement method: Group NR (control)-no reinforcement/no RT; Group NR + RT (control)-no reinforcement/RT; Group PO-tricalcium silicate-based cement (TS) apical plug/canal obturation/no RT; Group PO + RT-TS apical plug/canal obturation/RT; Group TS-canal filling with TS/no RT; Group TS + RT-canal filling with TS/RT; Group FP-TS apical plug/fibreglass post/no RT; and Group FP + RT-TS apical plug/fibreglass post/RT. Fracture resistance was determined using a universal testing machine (0.5 mm/min).

RESULTS

In the intergroup comparison, nonirradiated teeth had higher fracture resistance (p < .05). Groups FP and FP + RT had higher fracture resistance (p < .001).

CONCLUSION

Radiotherapy affected the fracture resistance of simulated immature teeth. Reinforcement with fibreglass posts increased the fracture resistance, regardless of the radiation.

Effect of Non-thermal Plasma Therapy on Pushout Bond Strength of Epoxy Resin and Tricalcium Silicate-Based Endodontic Sealers

Introduction: The current study aimed to assess the effect of non-thermal plasma (NTP) on the pushout bond strength (PBS) of epoxy resin and tricalcium silicate-based endodontic sealers. Methods: Forty single-canal extracted teeth were decoronated at the coronal region, underwent root canal preparation, and were assigned to four groups (n=10) for the application of AH26 sealer, NTP+AH26 (P-AH26), Endoseal TCS sealer, and NTP+Endoseal TCS sealer (P-TCS). The root canals were sectioned into 1 mm slices, and the PBS value was measured in a universal testing machine. Data were analyzed by the Friedman, Kruskal-Wallis, and Dunn tests (P<0.05). Results: The PBS of TCS and P-TCS groups was not significantly different (P>0.05). The PBS of the P-AH26 group was significantly lower than that of the AH26 group in the middle third (P<0.05). The PBS of the AH26 group was higher than the other groups in all sections. The PBS in the apical third was lower than other sections in all groups (P<0.05). Conclusion: NTP had no significant effect on the PBS of Endoseal TCS. NTP significantly decreased the PBS of AH26 sealer in the middle third but had no significant effect on its bond strength in other sections.

The effects of chelation on the intratubular penetration depth of mineral trioxide aggregate

The penetration depth and extent of mineral trioxide aggregate (MTA) crystallisation into dentinal tubules at 2, 4 and 6 weeks after chelation and MTA obturation were investigated. Standardised 12 mm human root specimens (45) were prepared with NiTi rotary files using 4% NaOCl irrigation. They were randomly allocated to three irrigants (n = 15: 4% NaOCl, 15% ethylenediaminetetraacetic acid or Edgemix) and obturated with sodium fluorescein tagged ProRoot MTA. One millimetre thick apical, middle and coronal sections were examined using confocal laser scanning microscopy to determine MTA penetration depth and area. Depths varied from 352 to 1821 μm at 6 weeks depending on section level and were unaffected by chelation. No differences (p > 0.05) were found in mean maximum penetration depth or dentine area (%) between the 3 irrigants at all time intervals. MTA mineralisation penetrated up to 90% of dentinal tubules and can extend to the cementum in roots with patent, non-infected tubules.

Synthesis and analyses of injectable fluoridated-bioactive glass hydrogel for dental root canal sealing

This study aimed to synthesize fluoride-doped bioactive glass (F-BG) based thermo-sensitive injectable hydrogel for endodontic applications. The structural and phase analyses were done with Fourier Transform Infrared spectroscopy and X-ray Diffraction, respectively. The setting time of prepared injectable was investigated at 21°C (in the presence and absence of an ultrasonic scalar) and at 37°C. Flowability was tested according to ISO-6876:2012 specifications, whereas injectability was checked by extrusion method using 21-, 22-, and 23-gauge needles. The in vitro bio-adhesion and push-out bond strength were studied on days 7 and 90 and compared with the commercially available TotalFill®. The ion release profile was analyzed for up to 30 days with Inductively Coupled Plasma Optical Emission Spectroscopy. The fluoride release analysis was conducted periodically for up to 21 days in deionized water and artificial saliva using an ion-selective electrode. The final setting time at 21°C, 21°C+ultrasonic scalar, and 37°C were 38.66±3.21, 29.12±1.23, and 32±3.46 min, respectively. The flowability was 25±3.94 mm, and the injectability coefficient was ≥70.3 for 22, 21, and 57% in a 23-gauge needle. Fluoride release in deionized water was found to be significantly higher than in artificial saliva and increased with time. A significant difference in bond strength was found between days 7 and 90, where the strength was increased, and a new apatite layer was formed on the tooth surface. A rapid release of calcium, phosphate, and silicon ions was seen initially, whereby the continuous release of these ions was observed for up to 30 days. The prepared F-BG injectable hydrogel has shown promising results and has the potential to be used as an endodontic sealer.

Evaluation of push-out bond strength, dentinal tubule penetration and adhesive pattern of bio-ceramic and epoxy resin-based root canal sealers

INTRODUCTION

Root canal sealing materials play a crucial role in an endodontic procedure by forming a bond between the dentinal walls and the gutta-percha. The current study aims to analyse the dentinal tubule penetration and adhesive pattern, including the push-out bond strength of six commercially available root canal sealers.

METHODOLOGY

Eighty-four mandibular first premolars were split into seven groups (and n = 12), Group 1: Dia-Root, Group 2: One-Fil, Group 3: BioRoot RCS, Group 4: AH Plus, Group 5: CeraSeal, Group 6: iRoot SP, Group 7: GP without sealer (control). Two groups were made, one for dentinal tubule penetration and the other for push-out bond strength; the total sample size was one hundred sixty-eight. Root canal treatment was performed using a method called the crown down technique, and for obturation, the single cone technique was used. A confocal laser scanning microscope (Leica, Microsystem Heidel GmbH, Version 2.00 build 0585, Germany) was used to evaluate dentinal tubule penetration, and Universal Testing Machine was utilised to measure the push-out bond strength (Shimadzu, Japan) using a plunger size of 0.4 mm and speed of 1mm/min. Finally, the adhesive pattern of the sealers was analysed by HIROX digital microscope (KH-7700). Statistical analysis was carried out by a one-way Anova test, Dunnet's T3 test, and Chi-square test.

RESULTS

Highest dentinal tubule penetration was noticed with One-Fil (p<0.05), followed by iRoot SP, CeraSeal, AH Plus, Dia-Root also, the most negligible value was recorded for BioRoot RCS. Meanwhile, BioRoot RCS (p<0.05) demonstrated the greater value of mean push-out bond strength, followed by One-fil, iRoot SP, CeraSeal, AH Plus and Dia-Root. Regarding adhesive pattern, most of the samples were classified as type 3 and type 4 which implies greater sealing ability and better adherence to the dentinal wall. However, BioRoot RCS revealed the most type 4 (p<0.05), followed by AH Plus, One-Fil, CeraSeal and Dia-Root.

CONCLUSION

The highest dentinal tubule penetration was shown by One-Fil compared to other groups. Meanwhile, BioRoot RCS had greater push-out bond strength and more adhesive pattern than other tested materials.

Impact of Heating Exposure on the Micro-Push-Out Bond Strength of Bioceramic Sealers

Introduction

The aim of this study was to evaluate the effect of heating of bioceramic and epoxy resin-based sealers on their micro-push-out bond strength (BS) to root canal dentin.

Methods

After criterial selection, 30 human teeth were decoronated and 1-mm thick slices (n = 60) were obtained perpendicularly along tooth axis, from cervical and middle root thirds, with a diamond disc attached to a cutting machine. In each slice, three 1.0-mm diameter orifices were made. After rinsing with 17% EDTA and 2.5% NaOCl, each orifice was filled with Bio-C Sealer or BioRoot RCS or AH Plus, according to the manufacturers' instructions. After filling, half of the slices (n = 30) were heated at 100°C for 1 min, and the other half were kept at room temperature. After 7 days-controlled storage, micro-push-out test was performed in a Universal Testing Machine. Failures were analyzed using a stereomicroscope. Statistical analysis was performed with One-Way ANOVA and post hoc Tukey (α = 5%) tests.

Results

AH Plus demonstrated higher BS values after heating (p=0.001) when compared to nonheated. The other sealers did not show a statistically significant difference (p > 0.05). When heated, the average BS values for AH Plus were higher than for BioRoot RCS and Bio-C Sealer (p < 0.001). Cohesive failure mode was the most frequent, followed by adhesive and mixed ones.

Conclusion

Heating provided a higher push-out BS to root dentin for AH Plus and did not influence BioRoot RCS or Bio-C sealer.

Synergistic effect of ion-releasing fillers on the remineralization and mechanical properties of resin-dentin bonding interfaces

In modern restorative dentistry, adhesive resin materials are vital for achieving minimally invasive, esthetic, and tooth-preserving restorations. However, exposed collagen fibers are found in the hybrid layer of the resin-dentin bonding interface due to incomplete resin penetration. As a result, the hybrid layer is susceptible to attack by internal and external factors such as hydrolysis and enzymatic degradation, and the durability of dentin bonding remains limited. Therefore, efforts have been made to improve the stability of the resin-dentin interface and achieve long-term clinical success. New ion-releasing adhesive resin materials are synthesized by introducing remineralizing ions such as calcium and phosphorus, which continuously release mineral ions into the bonding interface in resin-bonded restorations to achieve dentin biomimetic remineralization and improve bond durability. As an adhesive resin material capable of biomimetic mineralization, maintaining excellent bond strength and restoring the mechanical properties of demineralized dentin is the key to its function. This paper reviews whether ion-releasing dental adhesive materials can maintain the mechanical properties of the resin-dentin bonding interface by supplementing the various active ingredients required for dentin remineralization from three aspects: phosphate, silicate, and bioactive glass.

Antibacterial Activity of Root Repair Cements in Contact with Dentin-An Ex Vivo Study

This study assessed the antibacterial characteristics of the dentin/material interface and dentin surfaces exposed to experimental hydraulic calcium silicate cement (HCSC) with or without bioactive glass (BG) replacement (20% or 40%) or mixed with a silver nanoparticle (SNP) solution (1 or 2 mg/mL), and Biodentine, TotalFill BC RRM putty and Intermediate Restorative Material (IRM). Human root dentin segments with test materials were assessed at 1 or 28 days. In one series, the specimens were split to expose the dentin and material surfaces. A 24 h direct contact test was conducted against three-day established Enterococcus faecalis and Pseudomonas aeruginosa monospecies biofilms. In another series, the dentin/material interface of intact specimens was exposed to biofilm membranes for 3 days and the antibacterial activity was assessed via confocal microscopy. The interface was additionally characterised. All one-day material and dentin surfaces were antibacterial. Dentin surfaces exposed to HCSC with 40% BG-replacement, Biodentine and IRM had decreased antibacterial properties compared to those of the other cements. The HCSC mixed with a 2 mg/mL SNP solution had the highest antimicrobial effect in the confocal assay. The interfacial characteristics of HCSCs were similar. The test materials conferred antibacterial activity onto the adjacent dentin. The BG reduced the antibacterial effect of dentin exposed to HCSC; a 2 mg/mL SNP solution increased the antibacterial potential for longer interaction periods (three-day exposure).

Comparison of the push-out bond strength of two hydraulic calcium silicate-based endodontic sealers and an epoxy resin-based sealer

Background

The aim of this study was to assess and compare the push-out bond strength of AH Plus Bioceramic Sealer, TotalFill BC Sealer HiFlow and epoxy resin sealer AH Plus in root canals.

Material and Methods

Ninety single rooted teeth with were prepared using rotatory files, 5,25 % sodium hypochlorite and 17% ethylenediaminetetraacetic acid. The teeth were divided into three groups (n=30) and obturated using the single-cone technique with TotalFill BC Sealer HiFlow in Group 1, AH Plus Bioceramic Sealer in Group 2, and AH Plus in Group 3. Three sections (coronal, middle and apical) were obtained for each root (n=270), and the push-out bond strength was evaluated for each section using an universal testing machine. The push-out bond strength among the groups was analysed using the Welch test, while the Mann-Whitney test was used to compare resistance among the coronal, middle and apical thirds of the root.

Results

Significant differences were observed between the mean push-out bond strength of the two hydraulic calcium silicate sealers and the resin-based root canal sealer (P> 0.05). Only Group 1 exhibited significant regional differences among the root thirds, with the apical third demonstrating significantly higher strength values compared to the middle and coronal thirds.

Conclusions

Based on the present study, it can be concluded that there are differences in the push-out bond strengths between the two hydraulic calcium silicate sealers (HCSSs) and the resin-based sealer, while no significant difference was found between the two HCSSs. Key words:Push-out bond strength, root canal sealer, root canal obturation, hydraulic calcium silicate cements, bioceramic sealers.

Influence of long -term thermal cycling and masticatory loading simulation on bond strength of roots filled with epoxy resin and calcium silicate based sealers

BACKGROUND

The aim of this study was to evaluate the effect of thermal and mechanical cyclic aging using a mastication simulator on push-out bond strength of mandibular premolars obturated with AH Plus and BioRoot RCS root canal sealers.

METHODS

With REVO-S files up to SU/0.06 taper, 48 single-rooted premolar teeth were instrumented. The teeth were randomly divided into two main groups (n = 24) based on the two root canal sealers used (AH Plus and BioRoot RCS). All teeth were obturated with h matched-taper single-cone. Each main group was then subdivided into three subgroups (A, B, and C) (n = 8). Group A served as the negative control group (no-thermocycling aging). While groups B and C were subjected to thermal changes in a thermocycler machine (15,000 and 30,000 thermal cycles, respectively), followed by two different dynamic loading periods, 3 × 105 and 6 × 105 in a masticatory simulator with a nominal load of 5 kg at 1.2 Hz which represent roughly 1½ and 3 years of clinical function respectively. 2 mm slice at 3 levels, apical, middle, and coronal, to obtain 3 sections were prepared and subjected to push-out test using a universal testing machine. Statistical analysis was performed using analysis of variance (ANOVA) followed by a Tukey post hoc comparisons test and an independent T-test. A significance level of 5% was used.

RESULTS

After thermal-mechanical cyclic aging, the two root canal sealers showed a significantly decreased in push-out bond strength (p < 0.05), however, AH Plus had significantly higher bond strength values than BioRoot RCS after cycling aging.

CONCLUSIONS

It could be concluded that thermal-mechanical cyclic aging had a significant impact on the outcome of the dislodgment resistance of AH Plus and BioRoot RCS.

Does radiation therapy affect adhesion of tricalcium silicate cements to root dentin?

OBJECTIVE

This study aimed to analyze the effect of irradiation on the push-out bond strength of mineral trioxide aggregate (MTA) and Biodentine to radicular dentin.

METHODOLOGY

A total of 60 extracted mature human teeth with single root canals were categorized into two groups (irradiated and non-irradiated) (n=30). Each group was further divided into two sub-groups based on cements used (Biodentine and MTA). Then, a cumulative radiation dose of 60 Gy was divided into 30 fractions (two Gy for every fraction) and administered for five successive days per week over six weeks. Obturation was then performed using MTA and Biodentine. Afterwards, 1.5 mm thick horizontal sections were procured from the middle one-third of all the specimens and then subjected to push-out bond test. Results were analyzed using one-way analysis of variance with post-hoc Tukey's test.

RESULTS

The bond strength of Biodentine and MTA to irradiated teeth was lower than non-irradiated teeth. Highest push-out bond strength was observed in non-irradiated specimens filled with Biodentine (p=0), followed by irradiated specimens filled with Biodentine (p=0); non-irradiated specimens filled with MTA (p=0); and irradiated specimens filled with MTA (p=0.9).

CONCLUSION

The push-out bond strength of Biodentine and MTA to root canal dentin decreased significantly post irradiation.

Effect of different chelating agents on the shear bond strength of calcium silicate-based cements to coronal dentin

We evaluated the shear bond strength (SBS) of mineral trioxide aggregate (MTA) and Biodentine (BD) to coronal dentin after treatment with ethylenediaminetetraacetic acid (EDTA), phytic acid (IP6), or etidronic acid (HEDP). Sodium hypochlorite-treated dentin surfaces were randomly divided into four groups according to conditioning protocol namely, 17% EDTA, 2.5% IP6, 9% HEDP, or distilled water (DS). Specimens were further divided according to the type of cement placed on conditioned dentin and SBS was tested. The results showed that DS/MTA and IP6/MTA groups had the highest values, and there was no significant difference between these two groups. IP6/BD group showed a lower SBS value compared to IP6/MTA; however, this did not reach the level of significance. The BS to dentin was influenced by the type of calcium silicate material and chelating agent. IP6 either improved or maintained the bonding while EDTA and HEDP showed a negative or no influence effect.

Successful outcome of permanent maxillary incisor reimplanted after 30 hours of extra-oral time-a case report with 5-year follow-up

Key Clinical Message

Tooth reimplantation should be attempted in every possible case with thorough disinfection and impervious obturation. Integration of progressive innovations with recommended protocols can enhance complication free survival in intense situations.

Abstract

The present case describes the unique successful outcome of a tooth reimplanted after the delay of 30 hours. A 21-year old male patient presented with an avulsed #21 after a fall due to electric shock. It was reimplanted according IADT guidelines with the addition of specific irrigation sequence proposed for regenerative endodontic procedures during the endodontic treatment. The final obturation was accomplished by combination of Biodentine and BioRCS root-canal sealer. Subluxated #11 developed symptoms at 6 months and was further managed using recommended endodontic procedure. Both teeth had complication free survival during 5 year follow-up.

Impact of corticosteroid administration on the response of exposed dental pulp to capping with bioactive cements-experimental study on mongrel dogs

BACKGROUND

Corticosteroids are commonly used as a treatment for a variety of pathological conditions, however, systemic corticosteroid administration has adverse effects including impaired immune response and wound healing. Such complications may affect pulp healing after direct pulp capping. The current study evaluated the influence of corticosteroids on the healing ability of exposed dogs' dental pulps after direct pulp capping (DPC) with bioactive materials.

METHODS

Ten healthy male dogs were assigned randomly into two groups, 5 dogs each: group I represent the control group which did not receive any medication, and group II was given corticosteroid for 45 days before DPC and till the dogs were euthanized (n = 75 teeth for each group). Following mechanical exposure, the pulps were randomly capped with either Ca(OH)_2, MTA, or Biodentine. The pulpal tissues' reaction to the capping materials was evaluated 65 days postoperatively according to the following parameters: calcific bridge formation, pulpal inflammation, pulp necrosis, and bacterial infiltration.

RESULTS

The corticosteroid-treated group revealed no significant difference compared to the control group concerning the pulp healing response (P > 0.05). Both Biodentine and MTA-treated specimens revealed significant differences with Ca(OH)₂-treated specimens (P < 0.05) which displayed a superior positive effect of both MTA and Biodentine to Ca(OH)₂ regarding all the parameters.

CONCLUSIONS

Direct pulp capping technique whenever indicated in subjects treated with corticosteroid immunosuppressive drugs like prednisone performed well in aseptic conditions especially when capped with bioactive materials.

Bioactive Restorative Materials Applied over Coronal Dentine-A Bibliometric and Critical Review

The objective of the research was to examine the scientific literature concerning restorative materials with bioactive properties for the purpose of covering dentin. Searches were performed in various databases including MEDLINE, Scopus, Web of Science, Cochrane Library, Lilacs/BBO, and Embase. Inclusion criteria involved studies that utilized the terms "dentin" and "bioactive", along with "ion-releasing", "smart materials", "biomimetic materials" and "smart replacement for dentin". The information extracted included the title, authors, publication year, journal and the country of affiliation of the corresponding author. The studies were categorized based on their study design, type of material, substrate, analytical method, and bioactivity. A total of 7161 records were recovered and 159 were included for data extraction. Most of the publications were in vitro studies (n = 149), testing different types of materials in sound dentine (n = 115). Most studies were published in Dental Materials (n = 29), and an increase in publications could be observed after the year 2000. Most of the articles were from the USA (n = 34), followed by Brazil (n = 28). Interfacial analysis was the most investigated (n = 105), followed by bond strength (n = 86). Bioactivity potential was demonstrated for most tested materials (n = 148). This review presents insights into the current trends of bioactive materials development, clearly showing a severe lack of clinical studies.

Comparison of obturation quality in natural and replica teeth root-filled using different sealers and techniques

OBJECTIVES

This study aims to assess the obturation efficacy of sealers placed with different techniques using microcomputed tomography (µCT) and assess the influence of µCT testing parameters on the obturation data obtained.

MATERIALS AND METHODS

Incisors and mesial roots of lower molars with standardized root length were scanned using µCT, and one tooth of each type was 3D printed in acrylic. Two obturation techniques (warm vertical and single cone) and 4 sealer types (AH Plus, BioRoot RCS, Totalfill BC, and Bio-C Sealers) were assessed following storage in Hank's balanced salt solution for 3 and 6 months by assessing gap and void volume percentages on both natural and replica incisor and molar roots. The storage solution was analysed to assess calcium ion leaching. The influence of temperature, tooth positioning, and moisture content of the teeth while µCT scanning was also investigated.

RESULTS

The obturation quality in the incisor group was the same using both natural teeth and replicas (p > 0.05). No changes in void volume were identified when comparing the same sealer using different obturation techniques. The premixed sealers used in single-cone obturation exhibited high void volume in the 3D printed replicas in the long term. The temperature, positioning, and moisture content of the teeth did not affect the outcome of µCT testing.

CONCLUSIONS

BioRoot RCS, Totalfill BC, and Bio-C Sealers are suitable for obturation of both complex and simple root canal systems using different obturation techniques with BioRoot RCS exhibiting the highest calcium ion release. 3D printed acrylic teeth can be used to assess the obturation quality in uncomplicated root canal systems. µCT parameters had no significant effect on the µCT measurement.

CLINICAL RELEVANCE

The single-cone obturation technique with hydraulic sealer is a simple technique that can be used for obturation of all root canal systems.

Impact of Final Irrigation Protocol on the Push-Out Bond Strength of Two Types of Endodontic Sealers

Aim: The aim of this study was to assess the impact of the final irrigation protocol on the push-out bond strength of calcium silicate-based sealers when compared to an epoxy resin-based sealer. Materials and Methods: Eighty-four single-rooted mandibular human premolars were shaped using the R25^® instrument (Reciproc, VDW, Munich, Germany) and then divided into three subgroups of 28 roots each depending on the final irrigation protocol: EDTA (ethylene diamine tetra acetic acid) and NaOCl activation, Dual Rinse^® HEDP (1-hydroxyethane 1,1-diphosphonate) activation or sodium hypochlorite (NaOCl) activation. Then, each subgroup was divided into two groups (14 each) according to the sealer used (AH Plus Jet^® or Total Fill BC Sealer^®) for single-cone obturation. Dislodgement resistance using a universal testing machine, samples' push-out bond strength and failure mode under magnification were determined. Results: EDTA/Total Fill BC Sealer^® showed significantly greater values of push-out bond strength compared with HEDP/Total Fill BC Sealer^® and NaOCl/AH Plus Jet^®, with no statistical difference with EDTA/AH Plus Jet^®, HEDP/AH Plus Jet^® and NaOCl/Total Fill BC Sealer^®, whereas HEDP/Total Fill BC Sealer^® showed significantly lower values of push-out bond strength. The apical third demonstrated higher means of push-out bond strength compared with middle and apical thirds. The most common failure mode was cohesive but showed no statistical difference compared to other types. Conclusions: Irrigation solution and final irrigation protocol affect the adhesion of calcium silicate-based sealers.

Interfacial characteristics of BIOfactor MTA and Biodentine with dentin

The objective of this study was to characterize the interface between dentin and MTA-Angelus (Angelus, Londrina, Brasil), Biodentine (Septodont, France) and BIOfactor MTA (Imicryl, Konya, Turkey) using scanning electron microscopy (SEM), energy disperse X-ray spectroscopy (SEM-EDS) and confocal laser scanning microscopy (CLSM). Fifteen dentin segments were obtained from previously extracted single-rooted human teeth. Canal lumens were instrumented with diamond burs and then randomly filled with MTA-Angelus, Biodentine or BIOfactor MTA and placed in distilled water or Hanks' Balanced Salt Solution (HBSS) for 28-days. The samples were examined with SEM and the thickness of the interfacial layer measured. SEM-EDS analysis was performed to determine principal elemental composition of the material, dentin, and interfacial area. The marginal adaptation of cements to dentin was assessed by confocal microscopy and the percentage of material penetration was calculated. An interfacial layer was evident in approximately 70% of SEM images in both MTA-Angelus and BIOfactor samples. The thickness of interfacial layer was significantly higher in HBSS than in distilled water for all groups. MTA Angelus resulted in the thickest interfacial layer in distilled water while Biodentine had the thickest interfacial layer in HBSS. Calcium levels within the BIOfactor MTA-dentin interface were higher than both dentin and cement. Dentin penetration was higher in BIOfactor MTA and silicon was evident in all material-dentin interfaces. All calcium silicate-based materials promoted the formation of an interfacial layer. BIOfactor MTA exhibited promising characteristics with its good marginal adaptation even though it presented a moderately thick interfacial layer. RESEARCH HIGHLIGHTS: A distinguishable interfacial layer was observed in most of the samples within the BIOfactor MTA, MTA-Angelus and Biodentine groups. The elemental constitution of the interfacial layer was different from that of the calcium silicate based materials.

A scanning electron microscopic study evaluating the sealing ability of MTA, BiodentineTM, and new light-cure MTA used for furcal perforation repair

Background

To evaluate and compare the sealing ability of Mineral trioxide aggregate (MTA), BiodentineTM and light cure MTA used for the repair of furcal perforations using scanning electron microscope (SEM).

Material and Methods

The study sample comprised 45 extracted mandibular molars. The teeth were embedded in modeling wax. Standard access cavities were prepared in each tooth using a round bur and non-end cutting bur with a high-speed handpiece with water spray. Furcal perforations were made on the centre of the pulpal floor of each tooth using a 0.5mm round bur. The teeth were then randomly divided into 3 experimental groups of 15 specimens each based on the materials used to seal the perforation; Group A: MTA; Group B: BiodentineTM; Group C: Light cure MTA. All the sealed perforations were compacted with a moist cotton pellet, and the samples were stored in a closed container for 24 hours to allow the repair materials to set completely. After 24 hours the samples were sectioned longitudinally and the extent of marginal adaptation was measured using scanning electron microscopy. The sealing ability was evaluated by measuring the gap (in microns) between the pulpal floor and the material used for the furcal repair.

Results

The overall results showed that the marginal adaptation of light-cure MTA was better than both MTA as well as Biodentine. The mean space between the pulpal floor and the repair material was least for group C (2.29). Tuckey's post hoc test showed that a significant difference (p<0.05) existed between group C and group A & B.

Conclusions

Light-cure MTA exbibits good sealing ability to dentin when compared to conventionally used Biodentine and Mineral Trioxide Aggregate. Key words:Calcium silicates, MTA, Biodentinte, New light-cure MTA, Perforation repair.

Impact of different intraorifice barriers on fracture resistance of non-vital bleached teeth

Background and Aim

This study aimed to evaluate the effects of bleaching agents on the fracture resistance of endodontically treated teeth using different intraorifice barrier (IOB) materials.

Materials and Methods

The endodontic treatment was performed for 160 mandibular premolars, and then, the teeth were divided into four groups according to the IOB: Ionoseal, Biodentine, ProRoot MTA, and TheraBase. Then, these teeth were subdivided into four subgroups (n = 10) based on the bleaching agents as distilled water (control), hydrogen peroxide 35% (HP), sodium perborate (SP), and carbamide peroxide 37% (CP). The access cavities were restored with composite resin after applying the bleaching agents for 7 days. The fracture resistance test was performed using a universal testing machine. Data were statistically analyzed, and the significance level was set at 5%. A scanning electron microscope was used to evaluate the effect of bleaching agents on the surfaces of IOBs.

Results

The highest fracture resistance values were observed in Biodentine groups with significant differences compared to Ionoseal and ProRoot MTA (P <.05). The distilled water groups showed significantly the highest fracture resistance compared to SP and HP groups (P <.05). There was no significant difference between SP, HP, and CP groups (P >.05). It was demonstrated that the morphological surface of the intact IOBs (control) was different from the surface of IOBs treated with bleaching agents.

Conclusion

The intracoronal bleaching procedures affected negatively the fracture resistance of the endodontically treated teeth.

Flexural Properties of Contemporary Bioactive Restorative Materials: Effect of Environmental pH

This study investigated the effects of environmental pH on the flexural properties of ion-releasing restorative materials (IRMs), including giomer (Beautifil-Bulk Restorative - BB), alkasite (Cention N - CN), bioactive composite (Activa - AB) and resin-modified glass ionomer (Riva Light Cure -RV) restoratives. A bio-inert resin-based composite (Filtek Bulk-fill Posterior - FB) served as the control. Stainless steel molds were used to fabricate 40 beam-shaped specimens (12mm × 2mm × 2mm) for each material. The specimens were finished, measured, and randomly distributed into four groups (n=10) and immersed in aqueous solutions of pH 3.0, pH 5.0, pH 6.8, and pH 10.0 at 37°C for 28 days. Specimens were then subjected to a uniaxial three-point bending flexural test with a load cell of 5 KN and a fixed deformation rate of 0.5 mm/min until fracture occurred. Flexural modulus and strength were statistically analyzed using analysis of variance/Dunnet T3's test (p=0.05). Mean flexural modulus varied from (2.40±0.41 to 9.65±1.21 GPa), while mean flexural strength ranged from (21.56±2.78 to 163.86±13.13 MPa). Significant differences in flexural properties were observed among the various pH values and materials. All materials immersed in artificial saliva (pH 6.8) presented the highest flexural properties, except AB. The flexural strength of AB was significantly better when exposed to acidic environments. FB had better flexural properties than IRMs after exposure to a range of environmental pH values.

Effect of different dentin moisture on the push-out strength of bioceramic root canal sealer

Background/purpose

Different moisture condition may affect the adhesion between obturation materials and root canal walls, thus further affect the quality of root canal obturation. The aim of this study was to evaluate the influence of dentin moisture conditions after different root canal drying protocols on the push-out strength of bioceramic root canal sealer.

Materials and methods

Twenty root canals from extracted human decoronated premolars were prepared in vitro to #30/0.09 taper and assigned to 4 moisture condition groups after using different root canal drying protocols: normal moisture (paper point) group: the canals were blot dried with paper points until the last one appeared dry. Ethanol dry group: the canals were dried with paper points followed by dehydration with 95% ethanol. Isopropanol dry group: the canals were dried with paper points followed by dehydration with 70% isopropanol. Complete dry group: the canals were dried in an air-blowing thermostatic oven for at least 6 h until there was no change in weight at an interval of 1 h. After drying, the canals were obturated with bioceramic sealer iRoot SP. Then, each root was sectioned into eight slices with 1-mm-thick using a diamond saw (40 slices each group). The push-out strength was tested for each slice between the sealer and dentin wall using a universal testing machine at a crosshead speed of 0.5 mm/min, and failure modes were recorded. Two-way analysis of variance and Tukey test were used to analyze the push-out strength. Logarithmic linear regression analysis was used to compare the failure modes.

Results

Push-out strength was statistically different in different moisture groups (P < 0.05). After drying using paper point, iRoot SP specimens showed the highest push-out strength (2.04 ± 0.03 MPa), followed by 95% ethanol, 70% isopropanol. The lowest push-out strength (0.68 ± 0.04 MPa) was observed under complete dry. For the failure modes, the majority were cohesive failures in the coronal and middle thirds of the root; while in the apical third, mixed failure was common.

Conclusion

Different drying protocols influenced the push-out strength between bioceramic sealer and canal wall.

Impact of photodynamic therapy on the marginal adaptation of Biodentine used as root-end filling material

BACKGROUND

The marginal adaptation of root-end filling materials and the effective antibacterial control in a surgical site are crucial for the successful outcome of endodontic surgery.

OBJECTIVE

This study aimed to evaluate the effect of retrograde application of photodynamic therapy on the marginal adaptation of Biodentine used as a root-end filling material.

METHODS

Twenty single-rooted anterior teeth were selected, instrumented and obturated with gutta-percha and AH Plus. The apical 3 mm of the roots were resected and root-end cavities were prepared with an ultrasonic retro-tip. The teeth were randomly divided into two groups (n = 10). In the first group, photodynamic therapy (PDT) was applied in the retrograde cavity prior to the root-end filling. In the second group retro cavity was filled without PDT. All specimens were obturated with Biodentine and afterwards sectioned longitudinally. The gap width at the material-dentin interface was measured using a scanning electron microscope. The results were statistically analyzed.

RESULTS

The produced gap width by Biodentine/PDT was 3.85 μm versus 2.68 μm in the Biodentine control group with significant differences in-between.

CONCLUSION

Under the conditions of this study, PDT has a negative effect on the marginal adaptation of Biodentine used as root-end filling material.

Mechanism of action of Bioactive Endodontic Materials

A continuous search for bioactive materials capable of supporting the replacement of damaged pulp tissue, with effective sealing potential and biocompatibility, has represented the attention of studies over the last decades. This study involves a narrative review of the literature developed by searching representative research in PUBMED/MEDLINE and searches in textbooks associated with the mechanism of action of bioactive materials (calcium hydroxide, mineral trioxide aggregate (MTA), and calcium silicate cements). The reflective analysis of the particularities of the chemical elements of these materials, considering the tissue and antibacterial mechanism of action, allows a better understanding of the characteristics and similarities in their tissue responses. Calcium hydroxide paste remains the antibacterial substance of choice as intracanal dressing for the treatment of root canal system infections. Calcium silicate cements, including MTA, show a favorable biological response with the stimulation of mineralized tissue deposition in sealed areas when in contact with connective tissue. This is due to the similarity between the chemical elements, especially ionic dissociation, the potential stimulation of enzymes in tissues, and the contribution towards an alkaline environment due to the pH of these materials. The behavior of bioactive materials, especially MTA and the new calcium silicate cements in the biological sealing activity, has been shown to be effective. Contemporary endodontics has access to bioactive materials with similar properties, which can stimulate a biological seal in lateral and furcation root perforations, root-end fillings and root fillings, pulp capping, pulpotomy, apexification, and regenerative endodontic procedures, in addition to other clinical conditions.

Successful Orthograde Treatment of Teeth with External Inflammatory Root Resorption and Perforation Using a Tricalcium Silicate-Based Material

One possible consequence of dentoalveolar trauma is the development of external inflammatory root resorption (EIRR), which represents an anatomic and microbiologic challenge for clinicians. This case report describes different strategies implemented for successful endodontic management of teeth with multiple EIRR lesions, highlighting the orthograde root canal filling using a tricalcium silicate-based material (Biodentine, Septodont, Saint-Maur-des-Fossés, France). A 17-year-old female patient presented with severe pain in the anterior maxillary teeth and a history of trauma. Two- and three-dimensional radiographic exams confirmed EIRR in three teeth, with a total of 11 EIRR lesions, three exhibiting communication with the root canal. Therefore, chemo-mechanical preparation complemented by ultrasonic activation of irrigants and some changes of intra-canal dressing with calcium hydroxide were performed to reduce the microbiologic load of the affected teeth as much as possible. Then, the canals were entirely filled with Biodentine to interrupt the root resorption process and strengthen the remaining root structure. A 60-month follow-up showed the disappearance of bone rarefactions and the complete repair of the 11 EIRR lesions. The favorable long-term response indicates the feasibility of using tricalcium silicate-based putty as part of orthograde endodontic treatment of teeth with EIRR and root perforations.

The scientific management of deep carious lesions in vital teeth using contemporary materials—A narrative review

Aim

The aim of this article is to review the scientific evidence for deep caries removal in permanent vital teeth and the choice of dentine replacement material and restoration of the teeth to maintain long term tooth vitality and function.

Method

The two position statements namely the European Society of Endodontology and the American Association of Endodontists position statements on vital pulp therapy will be scrutinized and compared with regards to the deep caries removal strategy and assessed for evidence of best practice. The properties of materials used to manage vital pulps and the best way to restore the teeth will be reviewed and guidance on the full management of vital teeth will be suggested.

Conclusions

Promoting new treatment modalities for reversible and irreversible pulpitis allowing for pulp preservation should be considered. Although debatable, cases with deep caries should be managed by complete non-selective caries removal which will allow for pulpal management if needed and a more predictable outcome can be expected when using the new materials and treatment modalities of vital pulp therapy.

Resistance to fracture of simulated external cervical resorption cavities repaired with different materials

The aim of the study was to evaluate the fracture resistance (FR) of teeth with simulated external cervical resorption (ECR) cavities repaired with different materials. Following the shaping of the 80 human permanent maxillary central incisors, standard ECR cavities were prepared and restored with a nanohybrid composite resin; a high viscosity GIC Equia Forte Fill; Biodentine; Biodentine + nanohybrid composite resin; MTA BIOREP; MTA BIOREP + nanohybrid composite resin. Then, the root canals were obturated with AH Plus and gutta-percha. The roots were embedded acrylic resin blocks and fracture strength test was applied. The highest FR was observed in the Biodentine group, while the lowest was in Equia group (p < 0.05). No significant results were observed among composite, Biodentine + composite, MTA BIOREP + composite and MTA BIOREP (p > 0.05). Biodentine may be a preferable material for repairing ECR cavities. Adding a composite layer on MTA BIOREP and Biodentine did not improve the FR of these materials.

Assessment of the remineralisation induced by contemporary ion-releasing materials in mineral-depleted dentine

OBJECTIVES

Evaluate the ability of current ion-releasing materials to remineralise bacteria-driven artificial caries lesions.

MATERIALS AND METHODS

Standardised class I cavities were obtained in 60 extracted human molars. Specimens underwent a microbiological cariogenic protocol (28 days) to generate artificial caries lesions and then were randomly divided into four restorative groups: adhesive + composite (negative control); glass ionomer cement (GIC); calcium silicate cement (MTA); and resin-modified calcium silicate cement (RMTA). Microhardness analysis (ΔKHN) was performed on 40 specimens (10/group, t = 30 days, 45 days, 60 days in artificial saliva, AS). Micro-CT scans were acquired (3/group, t = 0 days, 30 days, and 90 days in AS). Confocal microscopy was employed for interfacial ultra-morphology analysis (2/group, t = 0 days and 60 days in AS). Additional specimens were prepared and processed for scanning electron microscopy (SEM) and FTIR (n = 3/group + control) to analyse the ability of the tested materials to induce apatite formation on totally demineralised dentine discs (60 days in AS). Statistical analyses were performed with a significance level of 5%.

RESULTS

Adhesive + composite specimens showed the lowest ΔKHN values and the presence of gaps at the interface when assessed through micro-CT even after storage in AS. Conversely, all the tested ion-releasing materials presented an increase in ΔKHN after storage (p < 0.05), while MTA best reduced the demineralised artificial carious lesions gap at the interface. MTA and RMTA also showed apatite deposition on totally demineralised dentine surfaces (SEM and FTIR).

CONCLUSIONS

All tested ion-releasing materials expressed mineral precipitation in demineralised dentine. Additionally, calcium silicate-based materials induced apatite precipitation and hardness recovery of artificial carious dentine lesions over time.

CLINICAL RELEVANCE

Current ion-releasing materials can induce remineralisation of carious dentine. MTA shows enhanced ability of nucleation/precipitation of hydroxyapatite compared to RMTA and GIC, which may be more appropriate to recover severe mineral-depleted dentine.

A Micro-CT Analysis of Initial and Long-Term Pores Volume and Porosity of Bioactive Endodontic Sealers

The evaluation of the porosities within the interface of root canals obturated with endodontics materials is extremely important for the long-term success of endodontic treatments. The aim of this study was to compare initial and long-term volume of pores (total, open, closed) and porosity (total, regional) of three bioactive endodontic sealers: GuttaFlow Bioseal, Total Fill BC Sealer, and BioRoot RCS. Root canals were obturated with three “bioactive” sealers using the single-cone technique. The volume of open and closed pores and porosity were calculated using a micro-computed tomography (MCT) method. The measurements were performed after 7 days (initial) and after 6 months (long-term) of incubation. Statistical significance was considered at p < 0.05. The total volume of pores remained unchanged after the 6-month storage. GuttaFlow Bioseal exhibited significantly higher long-term volume in open pores than Total Fill BC Sealer. The total porosity in all the tested sealers presented no statistically significant change after the 6-month storage, except for BioRoot RCS. The total porosity values of this latter material significantly increased after long-term incubation, especially in the apical region. In conclusion, the use of bioactive sealers with excessive tendency to create porosities both in shorth- and long-term periods of storage may compromise the long-term success of endodontic treatments.

Glass-ionomer and calcium silicate-based cements interactions with human dentine in health and disease: Two-photon fluorescence microscopy and Raman spectroscopy analysis

OBJECTIVES

To investigate the potential mineralising effects of calcium silicate-based dentine replacement material (Biodentine™) in comparison with glass-ionomer cement (GIC) (Fuji IX™) on different human dentine substrates using a multimodal non-invasive optical assessment.

METHODS

Cements were applied on artificially demineralised or naturally carious dentine and stored for 4 weeks in phosphate-rich media +/- tetracycline used for mineralisation labelling. Interfacial dentine was examined from the same sample and location before and after aging using two-photon fluorescence microscopy, fluorescence lifetime imaging (FLIM) and second harmonic generation (SHG) imaging. Additionally, Raman spectroscopy was used to detect changes in the mineral content of dentine.

RESULTS

Significant changes in the fluorescence intensity and lifetime were detected in partially demineralised dentine and caries-affected dentine underneath both tested cements, after storage (p < 0.001). This was associated with a significant increase in the mineral content as indicated by the increased intensity of the phosphate Raman peak located at 959 cm^-1 (p < 0.0001). Caries-infected dentine showed significant fluorescence changes under Biodentine™ after storage (p < 0.001), but not under GIC (p = 0.44). Tetracycline binding induced a reduction in the fluorescence lifetime with comparable increase in the fluorescence intensity in both cements' groups within the affected dentine (p < 0.001). Significance Two-photon fluorescence microscopy can be used efficiently for non-destructive in-vitro dentine caries characterisation providing a technique for studying the same dentine-cement interface over time and detect changes. Biodentine™ demonstrated comparable remineralising potential to GIC, in addition to inducing remineralisation of caries-infected dentine. This may suggest using Biodentine™ as part of minimally invasive operative dentistry (MID) in caries management.

Development and characterization of ion-releasing fiber-reinforced flowable composite

OBJECTIVE

This study aimed to develop and characterize an ion-releasing experimental fiber-reinforced flowable composite (Bio-SFRC) and dentin treatment solution made of poly(acrylic acid) (PAA) with a high molecular weight. In addition we also evaluated the interface structure and mineralization potential between the Bio-SFRC and dentin.

METHODS

Some mechanical properties (flexural properties and fracture toughness) of Bio-SFRC in comparison with commercial inert (G-aenial Flo X) and ion-releasing materials (ACTIVA-BioActive Base/Liner and Fuji II LC) were assessed (n = 8/group). Calcium-release at different time-points was measured during the first six weeks by using a calcium-ion selective electrode. Surface analysis of composites after being stored in simulated body fluid (SBF) was investigated by using SEM/EDS. Dentin disks (n = 50) were prepared from extracted sound teeth and demineralization was simulated by acid etching. SEM/EDS was used to evaluate the microstructure of dentin on the top surface and at interface with composites after being stored in SBF.

RESULTS

Bio-SFRC showed higher fracture toughness (1.6 MPa m^1/2) (p < 0.05) compared to Flo X (1.2 MPa m^1/2), ACTIVA (1 MPa m^1/2) and Fuji II LC (0.8 MPa m^1/2). Accumulative calcium release after six weeks from Bio-SFRC (15 mg/l) was higher than other tested ion-releasing materials (≈ 6 mg/l). Mineralization was clearly seen at the interface between treated dentin and Bio-SFRC. None of the commercial tested materials showed signs of mineralization at the interface and dentinal tubules remained open.

SIGNIFICANCE

Developing such reinforced ion-releasing flowable composite and PAA solution might offer the potential for mineralization at the interface and inside the organic matrix of demineralized dentin.

Micro-CT comparative evaluation of porosity and dentin adaptation of root end filling materials applied with incremental, bulk, and ultrasonic activation techniques

The purpose of this study is to investigate the effect of different application methods on the adaptation to dentin and porosity properties of calcium silicate based materials. This study included 72 maxillary canine teeth that had been extracted for various reasons. Following the root canal treatment, root, end resections were performed on the specimens. After the apicectomy, 3 mm deep cavities were created. All materials were mixed according to the manufacturer's instructions. Retrograde cavities were filled with RetroMTA [Group 1a-1c], Biodentine [Group 2a-2c] and BioAggregate [Group 3a-3c]. Placement techniques were applied for each material by using incremental, bulk technique and ultrasonic activation, respectively. The samples were scanned with the SkyScan 1272 μCT system. Porosity values were higher in bulk fill and incremental placement techniques than ultrasonic technique when using MTA and BioAggregate (p < 0.05), but Biodentine showed no statistically significant difference (p > 0.05) on using different placement techniques. The ultrasonic activation technique is beneficial to improve the condensation quality of MTA and BioAggregate. Biodentine showed better results regardless of different application techniques.

Push-Out Bond Strength of Calcium Silicate-Based Cements in the Presence or Absence of a Smear Layer

Objectives. Variations between the material compositions and the presence of a smear layer on the dentin surface may influence the bond strength of the material, thus this study evaluated the push-out bond strength of different calcium silicate materials to root dentin in the presence or absence of smear layer. Materials and Methods. The palatal canal of sixty maxillary first premolars were prepared and divided into three groups according to the materials to be used: ProRoot WMTA, Biodentine, and TotalFill FS. Each group was then divided into two subgroups; with and without a smear layer. Roots were sectioned into three slices and filled with the tested materials. Push-out bond strength of materials was measured by universal machine. Results. Bond strength of Biodentine was significantly higher than the MTA and TotalFill FS in the presence or absence of smear layer. Overall, removing the smear layer reduced the bond strength of the three materials. The reduction was significant for MTA and TotalFill FS but not for Biodentine. Conclusions. Biodentine demonstrated the highest bond strength to radicular dentin followed by MTA, and then TotalFill FS. Overall, removal of the smear layer from dentin surface reduced the bond strength of the calcium silicate root repair materials.

Evaluation of Bond Strength of Four Different Root Canal Sealers

The purposes of the study were to evaluate the influence of the sealer’s chemical composition on the interfacial strength between root canal dentin and root filling material, for two different classes of endodontic sealers, and to assess their failure modes. Methods: Forty extracted single-rooted teeth were randomly divided into four groups using the following endodontic sealers: RealSeal SE and Resilon (RSSE); EndoSequence BC sealer and BC Point (EBCS); Endoseal MTA and gutta-percha (EDS); Bioroot RCS and gutta-percha (BRS). Teeth were embedded in acrylic resin, and the roots were sectioned horizontally into 1 mm slices. For each slice, the perimeter was measured. A push-out test was performed using an Instron universal testing machine. For each sample, bond strength was calculated. Specimens were examined by SEM investigation in order to analyze the dentin−sealer−core interface. Results were assessed using analysis of variance (ANOVA) and Tukey and Bonferroni test. Results: Statistical analysis revealed that EDS and gutta-percha had significantly higher resistance to dislodgement compared to the other three groups (p < 0.05). EBCS and BC Point showed significantly greater push-out bond strength values compared to RSSE and Resilon (p < 0.05). Conclusions: Bioceramic endodontic sealers showed a higher bond strength to root dentin than methacrylate resin-based endodontic sealer.

Impact of dentin conditioning and sealer modification with chitosan-hydroxyapatite nanocomplexes on the antibacterial and mechanical characteristics of root dentin

INTRODUCTION

This study aimed to characterize the effectiveness of dentin-conditioning with bio-mineralizable chitosan-hydroxyapatite precursor (CS-HA) nanocomplexes alone or associated with tricalcium silicate sealer (TCS/CS-HA) on the mechanical property and antibiofilm efficacy in root dentin.

METHODS

Flow tests were performed following ISO6876:2012-specifications. Solubility was measured. Micromorphology was assessed using Scanning Electron Microscopy (SEM). Nanohardness/elastic modulus were also determined. Fracture resistance was determined on lower premolars that were prepared, and randomly distributed among 7-groups (n=8/group), including the control, CS-HA dentin-conditioning and root canal filled groups. Similar canal preparation/distribution procedure was followed to test the antibacterial effect on Enterococcus faecalis-infected roots. Descriptive statistic was used to report SEM findings. Flowability results were analyzed using Paired t-test. Multiple comparisons from solubility, fracture and antibacterial assays were assessed by one-way ANOVA-Tukey's tests.

RESULTS

TCS/CS-HA showed optimal flow and no effect on solubility after immersion for 4 weeks (p>.05). TCS/CS-HA significantly increased nanohardness and elastic modulus (210±11.3MPa, 7.9±0.9GPa) compared to TCS (44.5±7.8MPa, 2.1±0.3GPa,p<.05). SEM revealed needle-shaped mineralized structures resulting in fewer voids and a well-adapted sealer-dentin interface in the TCS/CS-HA groups. NaOCl-EDTA irrigation resulted in reduced fracture resistance (444.34N) while CS-HA dentin-conditioning alone (928.28N, p<.05) and CS-HA dentin-conditioning plus CS-HA/TCS resulted in higher fracture resistance (1134.06N, p<.05). CS-HA dentin-conditioning also reduced bacteria by 2.04 log (4.50±0.43) from the initial bacterial load (6.54±0.07, p<.05). There was further bacterial reduction when CS-HA-conditioned root canals were filled with TCS or TCS/CS-HA (0.00 to 0.98±0.57, p>.05).

CONCLUSION

Dentin modification with CS-HA increased the fracture resistance of root dentin, and decreased the residual bacterial burden. TCS/CS-HA potentiated the nanomechanical and physical properties of TCS.

Comparative evaluation of mineral trioxide aggregate and biodentine apical plug thickness on fracture resistance of immature teeth: An In vitro study

Aim

This study aims to compare the fracture resistance of simulated immature teeth after using different thicknesses of Mineral Trioxide Aggregate (MTA) and Biodentine apical plug.

Materials and Methods

Forty human maxillary anterior teeth were selected. Teeth were randomly divided into eight groups of five teeth in each group. Positive control group = 5 teeth; prepared without access cavity preparation. Access cavities of the remaining 35 teeth were prepared, and instrumented with Peeso reamers. Negative control = 5 teeth; filled with calcium hydroxide. Thirty teeth divided into Groups 1 and 2 of MTA (MTA-Angelus, Londrina, Brazil) and Biodentine (Septodant, Saint Maur des Fosses, France) and each group divided into three subgroups: subgroup A - 3 mm apical plug; subgroup B - 6 mm apical plug; and subgroup C: full canal length. The rest of the canals in subgroups A and B were filled with gutta-percha and AH Plus sealer. After the required storage period, all the samples were subjected to fracture testing under universal testing machine and fracture strength was recorded. Data were analyzed using 1-way analysis of variance with the Tukey post hoc test for multiple comparisons.

Results

The negative control group showed the lowest fracture resistance compared with the other groups (P < 0.0001). The 6-mm apical plug subgroup of biodentine showed the highest fracture resistance.

Conclusion

Within the limitations of this study, MTA and Biodentine can be used as an apical plug instead of root canal filling material to increase the fracture resistance of immature teeth.

The efficacy of different sealer removal protocols on the microtensile bond strength of adhesives to a bioceramic sealer-contaminated dentin

Background

The optimal bonding of adhesives to dentin requires the sealer to be completely removed from the dentinal walls.

Aim

This study compared the efficacy of different sealer removal protocols on the microtensile bond strengths (MTBS) of single-step adhesives to a calcium silicate-based bioceramic root canal sealer-contaminated dentin.

Materials and Methods

Standardized box-shaped Class I cavities were prepared in human lower third molars (N = 50). All cavities were contaminated with a bioceramic root canal sealer (Endosequence BC Sealer, Brasseler, Savannah, USA), except the control group (G1) cavities. For the experimental groups, contaminated dentin surfaces were wiped with a dry cotton pellet (G2), wiped with a cotton pellet saturated with water (G3), rinsed with the air/water spray (G4), and passively applied aqueous ultrasonic energy with an ultrasonic scaler (G5) before the restoration procedure. All the cavity surface was restored with a one-bottle universal adhesive and composite resin. All the specimens were subjected to both thermocycling (2,500 thermal cycles from 5 to 55°C, with a 30-s dwelling time and a 10-s transfer time) and mechanical loading (50 N load for 100,000 cycles). The restored specimens were sectioned into resin-dentin beams for MTBS evaluation. Additional specimens were prepared for the scanning electron microscopy (SEM) to examine the dentin-adhesive interface (n = 10).

Results

No significant difference was found between the mean bond strengths of the groups. In SEM examination, no residual sealer was found in any group.

Conclusion

Calcium silicate-based bioceramic sealer was removed from the dentin surface with all removal protocols when evaluated with MTBS after the thermal and mechanical cycle tests.

The Effect of Sealer Application Methods on Voids Volume after Aging of Three Calcium Silicate-Based Sealers: A Micro-Computed Tomography Study

During obturation, air voids are undesirable as they may provide shelter for microorganisms or passage for fluids. This study aimed to compare the occurrence of voids between three calcium silicate-based sealers (CSBSs) (MTA-Fillapex, BioRoot-RCS, Bio-C) and the change in their volume after aging. In addition, we aimed to compare voids when using two sealer application methods: lentulo-spiral (LS) and gutta-percha (GP) cone. Thirty extracted mandibular premolars (n = 30) were endodontically prepared and obturated using single GP cone (SGPC) technique. Each sealer was applied to 10 teeth (n = 10) using LS or GP. Micro-computed tomography (micro-CT) was used to quantify the volume of root filling and voids before and after 8-week storage in a phosphate-rich medium. The percentage of root filling and voids were compared between the groups using a Mann–Whitney U test and Kruskal–Wallis test with a Bonferroni correction. Before aging, the percentages of root filling volume after obturation were comparable with no significant differences between sealers (p = 0.325) or application methods (p = 0.950). After aging, the voids’ volume increased significantly in all sealers (p ≤ 0.05). However, no significant differences were found between sealers (p = 0.302). In conclusion, voids in CSBSs may not reduce in size with aging; hence, SGPC should be carefully selected for suitable cases.

Comparative evaluation of postoperative pain and periapical healing after root canal treatment using three different base endodontic sealers - A randomized control clinical trial

BACKGROUND

The aim of the present study was to evaluate and compare the postoperative pain and periapical healing after root canal treatment using three different base endodontic sealers.

MATERIAL AND METHODS

Primary root canal treatment was initiated in 63 patients diagnosed with necrotic pulp and apical periodontitis, cleaning and shaping was completed in two visit and different base endodontic sealers were used for obturation were selected based on the random allocation of the participants to the following groups; Tubli-Seal, AH Plus and BioRoot RCS. Postoperative pain was recorded by using 100 mm visual analog scale at 24 h, 48 h, 72 h and 7 d after obturation. Digital periapical radiographic evaluation was done to assess rate of periapical healing at baseline, 1, 3 and 6 months. Statistical analysis was done using Kruskal Wallis test and one-way ANOVA.

RESULTS

The mean difference in the size of periapical lesions for Tubli-Seal (6.27, 13.41), AH Plus (3.86, 9.80) and BioRoot RCS (4.05, 10.22) at 3 months and 6 months respectively. The mean pain scores at 24 h for Tubli-Seal (17.94 ± 11.35), AH Plus (11.57 ± 11.18), BioRoot RCS (4.73 ± 7.72). At 48 h, Tubli-Seal (5.26 ± 9.04), AH Plus (1.57 ± 3.74) and BioRoot RCS (1.57 ± 3.74) respectively. The mean pain score at 72 h for Tubli-Seal was 2.63 ± 7.33 whereas none of the patients had reported pain in AH Plus and BioRoot RCS group. None of the patients had pain after 7 d of treatment.

CONCLUSIONS

BioRoot RCS showed less postoperative pain compared to AH Plus and Tubli-Seal and showed better periapical healing compared to AH Plus and Tubli-Seal at 3 and 6 months intervals respectively. Key words:BioRoot RCS, root canal obturation, root canal sealers, periapical periodontitis, Periapical healing, postoperative pain.