Indirect cytotoxicity of dental materials: a study with Transwell inserts and the neutral red uptake assay

In Vitro Study of the Biological and Physical Properties of Dual-Cure Resin-Modified Calcium Silicate-Based Cement

BACKGROUND

The aim of the present study was to compare the biological and mechanical properties of a novel dual-cure, resin-modified calcium silicate material, Theracal PT^® (TP), with those of Theracal LC^® (TL) and Biodentine^TM (BD).

METHODS

The cell counting kit-8 was used on human dental pulp cells to test cell the viability of the three materials. Antibacterial activity of TP, TL, and BD against Enterococcus faecalis was investigated under anaerobic conditions. The ability of the materials to support odontogenic differentiation was studied by examining the relative gene expression of osteocalcin (OCN), osteopontin (OPN), and Collagen I (ColI) using real-time polymerase chain reaction. For mechanical property tests, microhardness was evaluated using the Vickers microhardness (VHN) test, and the bond strength to the resin was evaluated using a shear bond test machine.

RESULTS

There was no significant difference in cell viability between TL and TP after 48 h, and BD showed the highest cell viability, while TP showed the highest antibacterial effect. At the 12-h time point, there was no significant difference in ColI and OCN expression between BD and TP, but TP showed a higher expression of OPN than BD. However, at the 48-h time point, ColI and OCN showed higher levels of expression for BD than for TP and TL. At the same time point, only OPN had a higher diffusion for TP than for BD. TP demonstrated a VHN of approximately 30-35. This value was higher than that of TL and lower than that of BD. In contrast to VHN, the shear bond strength to resin was significantly higher for TL and TP than for BD.

CONCLUSION

TP showed lower biocompatibility than BD but higher OPN expression and antibacterial effects than BD and TL. TP showed higher shear bond strength than BD and higher VHN than TL and BD at the 24-h time point.

Are resin-containing pulp capping materials as reliable as traditional ones in terms of local and systemic biological effects?

The aim of this study was to compare the local and systemic effects of current pulp capping materials containing resin with those of traditional materials in an animal study. A total of 48 rats were used: a control group (n=12) (sub-control and negative control), a resin-containing group (n=18) (Calcimol LC, Theracal LC, Activa-BioActive Base/Liner), and a traditional group (n=18) (Biodentine, ProRoot MTA, Dycal). The materials which had been placed in polyethylene tubes were implanted in subcutaneous pockets. The rats were sacrificed at 1, 2, or 4 weeks. Evaluations were made of subcutaneous connective tissue, the left kidney, liver, and blood samples. Of all the study groups, MTA demonstrated biocompatibility at a level close to that of the control groups. Inflammation was observed to be more severe in resin-containing materials, but Activa Base/Liner showed a more successful local and systemic tissue response.

Antimicrobial Efficacy of Different Pulp-Capping Materials against Enterococcus faecalis: An In vitro Study

Aim:

The present study aims to assess the antimicrobial action of three different pulp-capping agents against Enterococcus faecalis.

Materials and Methods:

Three pulp-capping agents were chosen for this study: Calcicur, mineral trioxide aggregate (MTA)-Angelus, and Dycal. The zone of inhibition produced by these three pulp-capping agents was measured at 24 h and 72 h to assess their antimicrobial efficacy against E. faecalis. The agar diffusion method was used to examine the antimicrobial effect of pulp-capping agents. Mueller-Hinton agar plates were used to inoculate the microorganisms. Analysis of variance (ANOVA) and Tukey's post hoc tests were done to compare the different groups. P < 0.05 was considered as statistically significant.

Results:

At 24 h, the highest zone of inhibition was found in MTA-Angelus (3.32 ± 0.11 mm), followed by Dycal (2.02 ± 0.46 mm) and Calcicur (1.84 ± 0.92 mm). After 72 h, MTA-Angelus demonstrated a zone of inhibition of 4.60 ± 0.22 mm, followed by Dycal (3.48 ± 0.74 mm) and Calcicur (2.90 ± 0.18 mm). ANOVA test showed a highly statistical significance. A statistically significant difference (P < 0.001) was shown between MTA-Angelus and Dycal. Calcicur did not show any significant difference.

Conclusion:

This trial found that the freshly mixed MTA-Angelus has a significantly superior antimicrobial effect against E. faecalis than Dycal and Calcicur.

Cytocompatibility and antibacterial properties of capping materials

The aim of this study was to evaluate and compare the antimicrobial activity and cytocompatibility of six different pulp-capping materials: Dycal (Dentsply), Calcicur (Voco), Calcimol LC (Voco), TheraCal LC (Bisco), MTA Angelus (Angelus), and Biodentine (Septodont). To evaluate antimicrobial activity, materials were challenged in vitro with Streptococcus mutans, Streptococcus salivarius, and Streptococcus sanguis in the agar disc diffusion test. Cytocompatibility of the assayed materials towards rat MDPC-23 cells was evaluated at different times by both MTT and apoptosis assays. Results significantly differed among the different materials tested. Both bacterial growth inhibition halos and cytocompatibility performances were significantly different among materials with different composition. MTA-based products showed lower cytotoxicity and valuable antibacterial activity, different from calcium hydroxide-based materials, which exhibited not only higher antibacterial activity but also higher cytotoxicity.

Biocompatibility of Resin-based Dental Materials

Oral and mucosal adverse reactions to resin-based dental materials have been reported. Numerous studies have examined the biocompatibility of restorative dental materials and their components, and a wide range of test systems for the evaluation of the biological effects of these materials have been developed. This article reviews the biological aspects of resin-based dental materials and discusses the conventional as well as the new techniques used for biocompatibility assessment of dental materials.

Cytotoxicity of Two Bonding Adhesives Assessed by Three-Dimensional Cell Culture

Objective: To determine the toxicity of orthodontic adhesives assessed on in vitro three-dimensional reconstructed human oral epithelium (RHOE).

Materials and Methods: Two adhesive primers, Transbond XT (3M, Monrovia, Calif) and Excite (Vivadent, Schaan, Liechtenstein), were tested. After topical exposure, the cell cultures were fixed, cut, and stained for light microscopy (LM) and transmission electron microscopy (TEM). Detection of cytotoxicity by measuring lactate dehydrogenase (LDH) activity was performed. Toxicity was assessed by evaluating the morphological changes with LM and TEM. Copper wires and Triton X-100 served as positive controls, and native cell cultures as negative control.

Results: Morphological evaluation of the native cell cultures revealed no toxic reactions. The LDH assay revealed the following mean values for viability: native cell line (negative control), 1.51; Triton X-100 (positive control), 3.06; Transbond XT polymerized, 1.15; Excite polymerized, 1.11; Transbond XT primer, 2.67; and Excite primer, 0.04. Acute toxicity was observed for Triton X-100 and Transbond XT primer (P &lt; .001). Histological evaluation of the RHOE showed toxicity for both primers and mild changes after topical application of polymerized adhesives. The biocompatibility ranking of the adhesive primers was the same after histological analysis and LDH assay except for Excite™ noncured.

Conclusions: RHOE proved to be a valuable model for topical exposure. The toxicity of both uncured primers was demonstrated.

Toxicity of used orthodontic archwires assessed by three-dimensional cell culture

The aim of the present study was to determine whether used orthodontic wires made of different materials cause toxicity and loss of viability on three-dimensional (3D) cell cultures. Three types of orthodontic wires, stainless steel, Nitinol, and TMA (n = 9) which had been used clinically in fixed appliances for a period of 1 month, were retrieved at random from five patients. Both upper and lower archwires were collected and subjected to two different protocols: to assess toxicity, two pieces of each wire were placed on 3D cell cultures (reconstituted human epithelium); to investigate the possibility of cell damage, the 3-(4,5-dimethylthiazol-2-yl)2,5-diphenyl tetrazolium bromide (MTT) assay was used and haematoxylin and eosin staining was performed to evaluate morphological changes. Copper wire served as the control to determine the morphology of severe toxicity, and native cell cultures and silk were used as the negative controls. Morphological evaluation of the native cell cultures revealed no toxic reactions. The ranking, from mild to severe toxicity was as follows: stainless steel < Nitinol = TMA. There were no significant differences between TMA and Nitinol. The MTT assay revealed the following mean percentage values for viability: native cell line (negative control), 100; stainless steel, 102.25; TMA, 87.4; Nitinol, 85.3; and copper wire (positive control) 57.2. Histological evaluation of the 3D cell cultures showed no severe toxicity or loss of viability for any of the wires. However, relative comparison between the different wires revealed that stainless steel induced less toxicity/loss of viability compared with TMA and Nitinol wire.