Microbial Leakage of Gutta-percha and Resilon™ Root Canal Filling Material: A Comparative Study Using a new Homogeneous Assay for Sequence Detection

Post-Fatigue Fracture Resistance of Lithium Disilicate and Polymer-Infiltrated Ceramic Network Indirect Restorations over Endodontically-Treated Molars with Different Preparation Designs: An In-Vitro Study

The aim of the present study was to evaluate the fatigue to cyclic and static resistance of indirect restorations with different preparation designs made either of lithium disilicate (LS) or polymer-infiltrated ceramic network (PICN). Eighty-four (n = 84) molars were chosen, endodontically treated, and prepared with standardized MOD cavities. The molars were randomly divided into 6 study groups (n = 14) taking into account the "preparation design'' (occlusal veneer with 1.2 mm occlusal thickness; overlay with 1.6 mm occlusal thickness; adhesive crown with 2 mm occlusal thickness) and the "CAD/CAM material'' (E-max CAD, Ivoclar vivadent; Vita Enamic, Vita). A fatigue test was conducted with a chewing simulator set at 50 N for 1,500,000 cycles. Fracture resistance was assessed using a universal testing machine with a 6 mm diameter steel sphere applied to the specimens at a constant speed of 1 mm/min. A SEM analysis before the fracture test was performed to visually analyze the tooth-restoration margins. A statistical analysis was performed with a two-way ANOVA and a post-hoc pairwise comparison was performed using the Tukey test. The two-way ANOVA test showed that both the preparation design factor (p = 0.0429) and the CAD/CAM material factor (p = 0.0002) had a significant influence on the fracture resistance of the adhesive indirect restorations. The interaction between the two variables did not show any significance (p = 0.8218). The occlusal veneer had a lower fracture resistance than the adhesive crown (p = 0.042) but not lower than the overlay preparation (p = 0.095). LS was more resistant than PICN (p = 0.002). In conclusion, in the case of endodontically treated teeth, overlay preparation seems to be a valid alternative to the traditional full crown preparation, while occlusal veneers should be avoided in restoring non-vital molars with a high loss of residual tooth structure. LS material is more resistant compared to PICN.

What Are the Chances of Resilon to Dominate the Market Filling Materials for Endodontics?

This paper is a literature review with additional virtual analyses of the authors’ own experimental research results. Knowledge from various areas was synergistically combined, appropriately for concurrent engineering, presenting several possible methodological approaches used in research, optimizing the selection of engineering materials and the conditions of their application with particular application in endodontics. Particular attention was paid to the theoretical aspects of filling material strengths, weaknesses, opportunities, and threats SWOT analysis. Attention was paid to the original concepts of Sustainable Dentistry Development in conjunction with Dentistry 4.0, which includes endodontics as an important element. The dentists’ actions, among others, in conservative dentistry, along with endodontics, requires close cooperation with engineers and the enginering sciences. Methods of root canal preparation were described, together with selected tools, including those made of nitinol. Principles concerning the process of cleaning and shaping the pulp complex are presented. The importance of obturation methods, including the Thermo-Hydraulic-Condensation THC technique, and the selection of filling materials with the necessary sealants for the success of endodontic treatment are discussed. The experimental studies were carried out in vitro on human teeth removed for medical reasons, except for caries, for which two groups of 16 teeth were separated. After the root canal was prepared, it was filled with studs and pellets of a filling material based on polyester materials, which has gained the common trade name of resilon or, less frequently, RealSeal (SybronEndo) with an epiphany sealant. The teeth for the first group were obturated by cold lateral condensation. In the second case the obturation was performed using the Thermo-Hydraulic-Condensation technique using System B and Obtura III. The experimental leakage testing was done using a scanning electron microscope SEM and a light stereoscopic microscope LSM, as typical research tools used in materialography. The research results, in a confrontation with the data taken from the literature studies, do not indicate the domination of resilon in endodontics.

External Marginal Gap Variation and Residual Fracture Resistance of Composite and Lithium-Silicate CAD/CAM Overlays after Cyclic Fatigue over Endodontically-Treated Molars

The purpose of this in vitro study was to evaluate the external marginal gap variation with a 3D quantitative method and the residual fracture resistance after cyclic fatigue in endodontically treated molars restored with overlays of different materials, with and without fiber posts-supported buildups. Forty-eight human maxillary molars were selected, endodontically treated, prepared with standardized MOD cavities and randomly allocated into 6 study groups considering the "core strategy" (build-up with composite resin; build-up with composite resin supported by a fiber post); and the "restorative material" of the indirect adhesive overlay (GrandioBlocks, Voco; Cerasmart, GC; CeltraDuo, Dentsply). All procedures were executed according with manufacturers guidelines. Micro-CT analysis prior and after cyclic fatigue were executed, followed by scanning electron microscope analysis and fracture resistance test. The Two-Way ANOVA analysis showed that interfacial gap progression was significantly influenced by the "core strategy" (p < 0.01) but not of "restorative material" (p = 0.59). Concerning fracture resistance, "restorative material" was statistically significant (p < 0.01), while "core strategy" (p = 0.63) and the interaction (p = 0.84) were not. In conclusion, the fiber post presence within the build-up promoted a lower interfacial gap opening after fatigue, evaluated through micro-CT scans. In terms of fracture resistance, teeth restored with Cerasmart and Celtra Duo were statistically similar, but superior to GrandioBlocks.

Is Gutta-Percha Still the “Gold Standard” among Filling Materials in Endodontic Treatment?

The paper is an extensive monographic review of the literature, and also uses the results of the authors’ own experimental research illustrating the noticed developmental tendencies of the filling material based on gutta-percha. The whole body of literature proves the correctness of the research thesis that this material is the best currently that can be used in endodontics. Caries is one of the most common global infectious diseases. Since the dawn of humankind, the consequence of the disease has been the loss of dentition over time through dental extractions. Both tooth caries and tooth loss cause numerous complications and systemic diseases, which have a serious impact on insurance systems and on the well-being, quality, and length of human life. Endodontic treatment, which has been developing since 1836, is an alternative to tooth extraction. Based on an extensive literature review, the methodology of qualifying patients for endodontic treatment was analyzed. The importance of selecting filling material and techniques for the development and obturation of the root canal during endodontic treatment was described. Particular attention was paid to the materials science aspects and the sequence of phase transformations and precipitation processes, as well as the need to ensure the stoichiometric chemical composition of Ni–Ti alloys, and the vacuum metallurgical processes and material processing technologies for the effects of shape memory and superelasticity, which determine the suitability of tools made of this alloy for endodontic purposes. The phenomena accompanying the sterilization of such tools, limiting the relatively small number of times of their use, play an important role. The methods of root canal preparation and obturation methods through cold side condensation and thermoplastic methods, including the most modern of them, the thermo-hydraulic condensation (THC) technique, were analyzed. An important element of the research hypothesis was to prove the assumption that to optimize the technology of development and obturation of root canals, tests of filling effectiveness are identified by the density and size of the gaps between the root canal wall, and the filling methods used and devices appropriate for material research, using mainly microscopy such as light stereoscopic (LSM) and scanning electron (SEM). The most beneficial preparations were obtained by making a longitudinal breakthrough of 48 natural human teeth, extracted for medical reasons, different from caries, with compliance with all ethical principles in this field. The teeth were prepared using various methods and filled with multiple obturation techniques, using a virtual selection of experimental variants. The breakthroughs were made in liquid nitrogen after a one-sided incision with a narrow gap created by a diamond disc using a materialographic cutter. The best effectiveness of the root canal filling was ensured by the technology of preparing the root canals with K3 rotary nitinol tools and filling the teeth with the THC thermoplastic method using the System B and Obtura III devices with studs and pellets of filling material based on gutta-percha after covering the root canal walls with a thin layer of AH Plus sealant. In this way, the research thesis was confirmed.

Virtual Approach to the Comparative Analysis of Biomaterials Used in Endodontic Treatment

The importance of endodontics is presented within our own concept of Dentistry Sustainable Development (DSD) consisting of three inseparable elements; i.e., Advanced Interventionist Dentistry 4.0 (AID 4.0), Global Dental Prevention (GDP), and the Dentistry Safety System (DSS) as a polemic, with the hypothesis of the need to abandon interventionist dentistry in favour of the domination of dental prevention. In view of the numerous systemic complications of caries that affect 3−5 billion people globally, endodontic treatment effectively counteracts them. Regardless of this, the prevention of oral diseases should be developed very widely, and in many countries dental care should reach the poorest sections of society. The materials and methods of clinical management in endodontic procedures are characterized. The progress in the field of filling materials and techniques for the development and obturation of root canals is presented. The endodontics market is forecast to reach USD 2.1 billion in 2026, with a CAGR of 4.1%. The most widely used and recognized material for filling root canals is gutta-percha, recognized as the “gold standard”. An alternative is a synthetic thermoplastic filler material based on polyester materials, known mainly under the trade name Resilon. There are still sceptical opinions about the need to replace gutta-percha with this synthetic material, and many dentists still believe that this material cannot compete with gutta-percha. The results of studies carried out so far do not allow for the formulation of a substantively and ethically unambiguous view that gutta-percha should be replaced with another material. There is still insufficient clinical evidence to formulate firm opinions in this regard. In essence, materials and technologies used in endodontics do not differ from other groups of materials, which justifies using material engineering methodology for their research. Therefore, a detailed methodological approach is presented to objectify the assessment of endodontic treatment. Theoretical analysis was carried out using the methods of procedural benchmarking and comparative analysis with the use of contextual matrices to virtually optimize the selection of materials, techniques for the development and obturation of root canals, and methods for assessing the effectiveness of filling, which methods are usually used, e.g., in management science, and especially in foresight research as part of knowledge management. The results of these analyses are presented in the form of appropriate context matrices. The full usefulness of the research on the effectiveness and tightness of root canal filling using scanning electron microscopy is indicated. The analysis results are a practical application of the so-called “digital twins” approach concerning the virtual comparative analysis of biomaterials used in endodontic treatment.

The effect of three different antioxidants on the dentinal tubular penetration of Resilon and Real Seal SE on sodium hypochlorite-treated root canal dentin: An in vitro study

OBJECTIVE

The effect of 10% ascorbic acid, 10% tannic acid, and 10% gallic acid on the dentinal tubular penetration of Resilon and Real Seal SE on sodium hypochlorite-treated root canal dentin was evaluated.

MATERIALS AND METHODS

Fifty human premolars were decoronated to attain 14-mm root length and divided into five groups of 10 teeth each. Biomechanical preparation was done with rotary instruments. Group I specimens were irrigated with saline and 17% ethylenediaminetetraacetic acid (EDTA). Specimens from groups II, III, IV, and V were irrigated with 5.25% sodium hypochlorite and 17% EDTA. Specimens from groups III, IV, and V underwent additional irrigation with antioxidants-10% ascorbic acid, 10% tannic acid, and 10% gallic acid, respectively. Following obturation with Resilon and Real Seal SE, scanning electron microscope (SEM) analysis was done to note the maximum dentinal tubular penetration at the cervical, middle, and apical thirds of each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA), Post hoc and Dunnett's test.

RESULTS

Maximum dentinal tubular penetration of Resilon and Real Seal SE was obtained following irrigation with 10% gallic acid.

CONCLUSION

10% gallic acid was superior among the antioxidant irrigants that enabled the increased dentinal tubular penetration of Resilon and Real Seal SE.

In vitro and ex vivo microbial leakage assessment in endodontics: A literature review

The aim of this study was to perform a literature review of published in-vitro and ex-vivo studies, which evaluated microbial leakage in endodontics in the past 10 years. A comprehensive electronic literature search was carried out in PubMed database for English articles published from 2005 to 2016 using the keywords “endodontics,” “in vitro,” “ex vivo,” “microbial leakage,” “microbial penetration,” “saliva,” “Enterococcus faecalis,” “E. faecalis,” “endodontic sealers,” “temporary filling material,” “apical plug,” “mineral trioxide aggregate,” and “MTA.” The keywords were combined using Boolean operators AND/OR. Based on our search strategy, 33 relevant articles were included in the study. There are three main methods for assessment of bacterial microleakage, namely, (A) the dual-chamber leakage model, (B) detection of bacteria using a scanning electron microscope (SEM), and (C) polymerase chain reaction. All bacterial leakage models have some limitations and may yield different results compared to other microleakage evaluation techniques (i.e., dye penetration, fluid filtration, or electrochemical tests). The results of SEM correlated with those of microbial leakage test in most studies. Microbial leakage test using saliva better simulates the clinical setting for assessment of the leakage of single or mixed bacterial species.

Resilon: Review of a New Material for Obturation of the Canal

Resilon is a thermoplastic synthetic polymer-based endodontic material alternative to gutta-percha. It contains bioactive glass and also radiopaque fillers. It has the same handling properties as gutta-percha. For endodontic retreatment, it may be dissolved with some solvents, such as chloroform or softened with heat. The composition of Resilon and its sealer (Epiphany) bond to dentin and form a monoblock. A review of the literature and a discussion of its properties comparing to other root canal filling materials are presented.

Sealing ability of root-end filling materials

BACKGROUND

The aim of this research was to compare the apical sealing ability of different root-end filling materials (SuperEBA(®), ProRoot MTA(®), thermoplasticized gutta-percha + AH-Plus(®), thermoplasticized RealSeal(®)), by means of microbial indicators.

MATERIALS AND METHODS

Thus, 50 human single-rooted teeth were employed, which were shaped until size 5 0, retro - prepared with ultrasonic tips and assigned to 4 groups, retro-filled with each material or controls. A platform was employed, which was split in two halves: upper chamber-where the microbial suspension containing the biological indicators was introduced (E. faecalis + S. aureus + P. aeruginosa + B. subtilis + C. albicans); and a lower chamber containing the culture medium brain, heart influsion, where 3 mm of the apical region of teeth were kept immersed. Lectures were made daily for 60 days, using the turbidity of the culture medium as indicative of microbial contamination. Statistical analyses were carried out at 5% level of significance.

RESULTS

The results showed microbial leakage at least in some specimens in all of the groups. RealSeal(®) has more microbial leakage, statistically significant, compared to ProRoot(®) MTA and SuperEBA(®). No significant differences were observed when compared ProRoot(®) MTA and SuperEBA(®). The gutta-percha + AH Plus results showed no statistically significant differences when compared with the other groups.

CONCLUSIONS

All the tested materials showed microbial leakage. Root-end fillings with Super-EBA or MTA had the lowest bacterial filtration and RealSeal shows highest bacterial filtration.

Resilon: a comprehensive literature review

Background and aims. An ideal root canal filling material should completely seal the entire root canal space and block communication between the root canal system and its surrounding tissues; it should also be nontoxic, noncarcinogenic, non-genotoxic, biocompatible, insoluble in tissue fluids and dimensionally stable. Bonding to dentin is a promising property, which can prevent leakage and improve the sealing ability of root canal filling materials. Resilon was developed and rec-ommended initially because the existing rootcanal filling materials did not bond to root canal dentin. Since its introduction in 2004, numerous reports have been published regarding various aspects of this material. The aim of this literature review is to present investigations regarding Resilon's physical and chemical properties and leakage studies. Materials and methods. A review of the literature was performed by using electronic and hand searching methods for Resilon from May 2004 to April 2012. Results. There are many published reports regarding Resilon. The searchshowed that Resilon is composed of a parent polymer, polycaprolactone or Tone, which is a biodegradable aliphatic polyester, with filler particles consisting of bioactive glass, bismuth oxychloride and barium sulfate. It possesses some antibacterial and antifungal properties. It is a promising material for root canal filling. Despite the presence of numerous case reports and case series regarding these applications, there are few designed research studies on clinical applications of this material. Resilon has some drawbacks such as high cost. Conclusion. Resilon seals well and is a biocompatible material. However, more clinical studies are needed to confirm its efficacy compared with other materials.

In Vitro Effects of External Pressure Changes on the Sealing Ability under Simulated Diving Conditions

Aim. To measure and validate the permeability of pressure changes in correlation to different root filling techniques. Methods. Eighty extracted single-rooted teeth were randomly assigned to one of eight groups of ten teeth. Following standardized instrumentation and irrigation, root canal fillings were performed using either cold lateral condensation, a warm carrier-based gutta-percha obturation technique, a warm carrier-based Resilon, or warm gutta-percha compaction with the downpack/backfill technique. After insertion of a pressure sensor within the pulp chamber ten teeth of each group then underwent simulated dives with pressure measurement and the other ten a dye penetration test during simulated dives to 5.0 bar. Differences were analyzed statistically (P < 0.05) using one-way analysis of variance (ANOVA). Results. When the warm carrier-based gutta-percha obturation technique and vertical gutta-percha obturation techniques were used, there was significant lower intrapulpal pressure to experimental chamber pressure (P > 0.05). When cold lateral condensation or carrier-based Resilon as used, pressure was sometimes almost completely equalized. Conclusions. Warm gutta-percha obturation techniques provide a largely pressure-tight seal whereas the Resilon obturation technique and cold lateral condensation appear to be unsuitable to pressure changes.

Influence of calcium hydroxide intracanal medication on bond strength of two endodontic resin-based sealers assessed by micropush-out test

AIM

To evaluate the influence of calcium hydroxide (CH) paste used as intracanal medication on the bond strength of AH Plus (AH) and Epiphany (EP) sealers to root dentin.

METHODOLOGY

Sixty palatal canals were prepared in human maxillary first molars, using a rotary system. Half of the specimens received distilled water, and the other ones received intracanal medication with CH for 14 days. Thereafter, the CH was removed and both groups were further divided into two subgroups, filled with either AH or EP. The test specimens were submitted to the micropush-out test at a speed of 0.5 mm min(-1) . Results were statistically analyzed with anova and Tukey's test at a 95% confidence level.

RESULTS

The use of CH had statistically significant (P < 0.05) influence on AH only, increasing its bond strength from 19.7 ± 4.5 to 23.8 ± 2.5 (mean ± SD in MPa). In both EP groups, with (1.8 ± 0.5 MPa) and without (1.5 ± 0.9 MPa) CH, the bond strength values were statistically significantly lower than in either of the AH groups (P < 0.05).

CONCLUSION

Calcium hydroxide used as intracanal medication for 14 days had a positive influence on the bond strength of AH to root dentin whereas the effect on EP was insignificant. Regardless of the intracanal medication used, AH showed considerably higher bond strength values compared with EP sealer.

Potential systematic error in laboratory experiments on microbial leakage through filled root canals: review of published articles

AIM

To systematically evaluate whether published studies on microbial leakage through filled root canals in human teeth embedded in a two-chamber system were properly controlled. Specifically, the control for the assumption that leakage should occur through the root canal rather than other routes was investigated.

METHODOLOGY

A systematic search was conducted using Medline, Biosis, Cochrane, Embase, and Web of Science databases. In addition, the reference lists of review articles pertaining to the topic were searched. No language restriction was applied. Two independent reviewers screened titles and abstracts. All articles deemed appropriate by either reviewer were included in the full-text evaluation. In case of disagreement, a referee arbitrated between the reviewers.

RESULTS

With 93.8% agreement prior to discussion and arbitration, 67 articles were included. On average, the size of the negative control group was 30% (mean) of the n in the experimental groups (minimum=0.0%, maximum=100%, SD=27%). The majority of studies (57 of 67) used inadequate negative controls. The whole root was covered with the sealing material in these specimens, whilst the root tip was left uncovered in the experimental groups. Consequently, leakage between outer root surface and sealing material was not controlled for. The authors of the remaining 10 communications did not state clearly how negative control assessments were performed.

CONCLUSIONS

Experimental investigations should be performed to assess the routes of microbial leakage in two-chamber models.

[Microleakage of root canal fillings with GuttaFlow and Resilon compared with lateral condensation]

Epiphany/Resilon and GuttaFlow are newly developed methods for obturation of the root canal system. Epiphany/Resilon is a thermoplastic, synthetic polymer-based root canal filling material which enables the bonding to the dentin root canal wall during root canal obturation. GuttaFlow is a cold flowable filling system for the obturation of root canals, combining sealer and gutta-percha in one product. The purpose of this study was to assess the leakage of the Epiphany/Resilon or GuttaFlow root canal filling compared with lateral condensation of gutta-percha. For this study were used 45 human extracted teeth, chemo mechanically prepared, divided into three groups and obturated with gutta-percha/AH Plus, Epiphany/Resilon and GuttaFlow. For dye penetration all teeth were centrifuged for three minutes at 30 g in 2% methylene blue and dissolved in 65% nitric acid for 3 days. The extracted methylene blue was determined with Photometer. Root Canal fillings with Epiphany/Resilon showed less dye penetration than lateral condensation of gutta-percha and GuttaFlow. Epiphany/Resilon is ideally suited as a root canal filling material.

Restoration of endodontically treated teeth review and treatment recommendations

Coronal restorations and posts can positively influence the long-term prognosis of teeth following root canal therapy. Final sealing the canal by placing an appropriate post and core will minimize leakage of oral fluids and bacteria into the periradicular area and is recommended as soon as possible after completion of root canal filling. Glass ionomer or MTA placed over the residual root canal filling after post space preparation may be effective to prevent bacterial leakage. A ferrule of 1-2 mm of tooth tissue coronal to the finish line of the crown significantly improves the fracture resistance of the tooth and is more important than the type of the material the core and post are made of.