Gelatin microgel-coated balloon catheter with enhanced delivery of everolimus for long-term vascular patency

In-stent restenosis (ISR) after percutaneous coronary intervention is a major reason for limited long-term patency due to complex neointimal proliferation caused by vascular injury. Drug-coated balloon (DCB) has been developed to treat various cardiovascular diseases including ISR by providing anti-proliferative drugs into blood vessel tissues. However, a significant proportion of the drug is lost during balloon tracking, resulting in ineffective drug delivery to the target region. In this study, we report an everolimus-coated balloon (ECB) using everolimus-loaded gelatin-hydroxyphenyl propionic acid microgel (GM) with enhanced everolimus delivery to vascular walls for long-term patency. GM with high drug loading (> 97%) was simply prepared by homogenizing enzyme-mediated crosslinked hydrogels. The optimal condition to prepare GM-coated ECB (GM-ECB) was established by changing homogenization time and ethanol solvent concentration (30 ∼ 80%). In vitro sustained everolimus release for 30 d, and cellular efficacy using smooth muscle cells and vascular endothelial cells were evaluated. Additionally, an in vivo drug transfer levels of GM-ECB using rabbit femoral arteries were assessed with reduced drug loss and efficient drug delivery capability. Finally, using ISR-induced porcine models, effective in vivo vascular patency 4 weeks after treatment of ECBs was also confirmed. Thus, this study strongly demonstrates that GM can be used as a potential drug delivery platform for DCB application. STATEMENT OF SIGNIFICANCE: We report an ECB using everolimus-loaded GM prepared by homogenization of enzymatic cross-linked hydrogel. GM showed efficient drug loading (> 97 %) and controllable size. GM-ECB exhibited potential to deliver everolimus in a sustained manner to target area with drug efficacy and viability against SMC and EC. Although GM-ECB had much lower drug content compared to controls, animal study demonstrated enhanced drug transfer and reduced drug loss of GM-ECB due to the protection of encapsulated drugs by GM, and the possible interaction between GM and endothelium. Finally, vascular patency and safety were assessed using ISR-induced porcine models. We suggest an advanced DCB strategy to alleviate rapid drug clearance by bloodstream while improving drug delivery for a long-term vascular patency.

Targeting Glucose Metabolism in Cancer Cells as an Approach to Overcoming Drug Resistance

The "Warburg effect" consists of a metabolic shift in energy production from oxidative phosphorylation to glycolysis. The continuous activation of glycolysis in cancer cells causes rapid energy production and an increase in lactate, leading to the acidification of the tumour microenvironment, chemo- and radioresistance, as well as poor patient survival. Nevertheless, the mitochondrial metabolism can be also involved in aggressive cancer characteristics. The metabolic differences between cancer and normal tissues can be considered the Achilles heel of cancer, offering a strategy for new therapies. One of the main causes of treatment resistance consists of the increased expression of efflux pumps, and multidrug resistance (MDR) proteins, which are able to export chemotherapeutics out of the cell. Cells expressing MDR proteins require ATP to mediate the efflux of their drug substrates. Thus, inhibition of the main energy-producing pathways in cancer cells, not only induces cancer cell death per se, but also overcomes multidrug resistance. Given that most anticancer drugs do not have the ability to distinguish normal cells from cancer cells, a number of drug delivery systems have been developed. These nanodrug delivery systems provide flexible and effective methods to overcome MDR by facilitating cellular uptake, increasing drug accumulation, reducing drug efflux, improving targeted drug delivery, co-administering synergistic agents, and increasing the half-life of drugs in circulation.

The Association of Patent Ductus Arteriosus with Inflammation: A Narrative Review of the Role of Inflammatory Biomarkers and Treatment Strategy in Premature Infants

Patent ductus arteriosus (PDA) is a common cardiovascular complication that complicates clinical care in the intensive care of premature infants. Prenatal and postnatal infections and the inflammation process can contribute to PDA, and intrauterine inflammation is a known risk factor of PDA. A variety of inflammatory biomarkers have been reported to be associated with PDA. Chorioamnionitis induces the fetal inflammatory process via several cytokines that have been reported to be associated with the presence of PDA and may have a role in the vascular remodeling process or vessel dilation of the ductus. On the other hand, anti-inflammatory agents, such as antenatal steroids, decrease PDA incidence and severity in patients born to those with chorioamnionitis. Proinflammatory cytokines, which are expressed more significantly in preterm neonates and chorioamnionitis, are associated with the presence of PDA. In this review, we focus on the pathogenesis of PDA in preterm infants and the role of biomarkers associated with the perinatal inflammatory process.

Can a Scaffold Enriched with Mesenchymal Stem Cells Be a Good Treatment for Spinal Cord Injury?

Spinal cord injury (SCI) is a worldwide highly crippling disease that can lead to the loss of motor and sensory neurons. Among the most promising therapies, there are new techniques of tissue engineering based on stem cells that promote neuronal regeneration. Among the different types of stem cells, mesenchymal stem cells (MSCs) seem the most promising. Indeed, MSCs are able to release trophic factors and to differentiate into the cell types that can be found in the spinal cord. Currently, the most common procedure to insert cells in the lesion site is infusion. However, this causes a low rate of survival and engraftment in the lesion site. For these reasons, tissue engineering is focusing on bioresorbable scaffolds to help the cells to stay in situ. Scaffolds do not only have a passive role but become fundamental for the trophic support of cells and the promotion of neuroregeneration. More and more types of materials are being studied as scaffolds to decrease inflammation and increase the engraftment as well as the survival of the cells. Our review aims to highlight how the use of scaffolds made from biomaterials enriched with MSCs gives positive results in in vivo SCI models as well as the first evidence obtained in clinical trials.

Nanospheres encapsulated everolimus delivery into arterial wall-the tissue pharmacokinetics and vascular response experimental study

OBJECTIVE

This study aimed to evaluate the pharmacokinetic profile and tissue effects of everolimus delivered into arterial wall using biodegradable nanospheres.

BACKGROUND

Delivery of everolimus into the arterial wall is challenging due to its low-lipophilic profile.

METHODS

A pharmacokinetic study included 28 porcine coronary arterial segments initially injured with balloon angioplasty followed by the local delivery of everolimus encapsulated in nanospheres (EEN) via injection through a microporous delivery catheter. The animals were sacrificed at 1 hour, 1,7,28, and 90-day follow-up. In the tissue effects study 16 coronary bare metal stent (BMS) were implanted following EEN delivery, 15 BMS following nanospheres delivery without the drug (reference group) and 16 implanted BMS served as a control. Angiographic and histology follow-up was scheduled at 28 and 90-day.

RESULTS

The study showed high-everolimus concentrations in arterial tissue early after nanoparticles delivery followed by its gradual decrease to 1.15 ± 0.40 ng/mg at 90 days. Histology analysis showed favorable biocompatibility and healing profile with comparable area stenosis between groups at both time-points.

CONCLUSIONS

The present study demonstrates for the first time the safety, biocompatibility, and long-term retention of everolimus in arterial tissue after single local delivery of biodegradable nanospheres.

Nanoparticles eluting stents for coronary intervention: Formulation, characterization and in vitro evaluation

Coronary artery disease (CAD) is currently a leading cause of death worldwide. In the history of percutaneous coronary intervention for the treatment of CAD, a drug-eluting stent (DES) is recognized as a revolutionary technology that has the unique ability to significantly reduce restenosis and provide both mechanical and biological solutions simultaneously to the target lesion. The aim of the research work was to design and fabricate DES coated with a nanoparticulate drug formulation. Sirolimus, an inhibitor of the smooth muscle cell (SMC) proliferation and migration, was encapsulated in polymeric nanoparticles. The nanoparticle formulation was characterized for various physicochemical parameters. Cell viability and cell uptake studies were performed using human coronary artery smooth muscle cells (HCASMCs). The developed nanoparticle formulation showed enhanced efficacy compared to plain drug solution and exhibited time-dependent uptake into the HCASMCs. The developed nanoparticle formulation was coated on the FlexinniumTM ultra-thin cobalt-chromium alloy coronary stent platform. The nanoparticle coated stents were characterized for morphology and residual solvent analysis. In-vitro drug release was also evaluated. Ex-vivo arterial permeation was carried out to evaluate the nanoparticle uptake from the surface of the stents. The characterization studies together corroborated that the developed nanoparticle coated stent can be a promising replacement of the current drug-eluting stents.

Repurpose but also (nano)-reformulate! The potential role of nanomedicine in the battle against SARS-CoV2

The coronavirus disease-19 (COVID-19), caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV2) has taken the world by surprise. To date, a worldwide approved treatment remains lacking and hence in the context of rapid viral spread and the growing need for rapid action, drug repurposing has emerged as one of the frontline strategies in the battle against SARS-CoV2. Repurposed drugs currently being evaluated against COVID-19 either tackle the replication and spread of SARS-CoV2 or they aim at controlling hyper-inflammation and the rampaged immune response in severe disease. In both cases, the target for such drugs resides in the lungs, at least during the period where treatment could still provide substantial clinical benefit to the patient. Yet, most of these drugs are administered systemically, questioning the percentage of administered drug that actually reaches the lung and as a consequence, the distribution of the remainder of the dose to off target sites. Inhalation therapy should allow higher concentrations of the drug in the lungs and lower concentrations systemically, hence providing a stronger, more localized action, with reduced adverse effects. Therefore, the nano-reformulation of the repurposed drugs for inhalation is a promising approach for targeted drug delivery to lungs. In this review, we critically analyze, what nanomedicine could and ought to do in the battle against SARS-CoV2. We start by a brief description of SARS-CoV2 structure and pathogenicity and move on to discuss the current limitations of repurposed antiviral and immune-modulating drugs that are being clinically investigated against COVID-19. This account focuses on how nanomedicine could address limitations of current therapeutics, enhancing the efficacy, specificity and safety of such drugs. With the appearance of new variants of SARS-CoV2 and the potential implication on the efficacy of vaccines and diagnostics, the presence of an effective therapeutic solution is inevitable and could be potentially achieved via nano-reformulation. The presence of an inhaled nano-platform capable of delivering antiviral or immunomodulatory drugs should be available as part of the repertoire in the fight against current and future outbreaks.

Surface engineering at the nanoscale: A way forward to improve coronary stent efficacy

Coronary in-stent restenosis and late stent thrombosis are the two major inadequacies of vascular stents that limit its long-term efficacy. Although restenosis has been successfully inhibited through the use of the current clinical drug-eluting stent which releases antiproliferative drugs, problems of late-stent thrombosis remain a concern due to polymer hypersensitivity and delayed re-endothelialization. Thus, the field of coronary stenting demands devices having enhanced compatibility and effectiveness to endothelial cells. Nanotechnology allows for efficient modulation of surface roughness, chemistry, feature size, and drug/biologics loading, to attain the desired biological response. Hence, surface topographical modification at the nanoscale is a plausible strategy to improve stent performance by utilizing novel design schemes that incorporate nanofeatures via the use of nanostructures, particles, or fibers, with or without the use of drugs/biologics. The main intent of this review is to deliberate on the impact of nanotechnology approaches for stent design and development and the recent advancements in this field on vascular stent performance.

Advanced polymeric nanotechnology to augment therapeutic delivery and disease diagnosis

Therapeutic and diagnostic payloads are usually associated with properties that compromise their efficacy, such as poor aqueous solubility, short half-life, low bioavailability, nonspecific accumulation and diverse side effects. Nanotechnological solutions have emerged to circumvent some of these drawbacks, augmenting therapeutic and/or diagnostic outcomes. Nanotechnology has benefited from the rise in polymer science research for the development of novel nanosystems for therapeutic and diagnostic purposes. Polymers are a widely used class of biomaterials, with a considerable number of regulatory approvals for application in clinics. In addition to their versatility in production and functionalization, several synthetic and natural polymers demonstrate biocompatible properties that dictate their successful biological performance. This article highlights the physicochemical characteristics of a variety of natural and synthetic biocompatible polymers, as well as their role in the manufacture of nanotechnology-based systems, state-of-art applications in disease treatment and diagnosis, and current challenges in finding a way to clinics.

Recent Advances in Manufacturing Innovative Stents

Cardiovascular diseases are the most distributed cause of death worldwide. Stenting of arteries as a percutaneous transluminal angioplasty procedure became a promising minimally invasive therapy based on re-opening narrowed arteries by stent insertion. In order to improve and optimize this method, many research groups are focusing on designing new or improving existent stents. Since the beginning of the stent development in 1986, starting with bare-metal stents (BMS), these devices have been continuously enhanced by applying new materials, developing stent coatings based on inorganic and organic compounds including drugs, nanoparticles or biological components such as genes and cells, as well as adapting stent designs with different fabrication technologies. Drug eluting stents (DES) have been developed to overcome the main shortcomings of BMS or coated stents. Coatings are mainly applied to control biocompatibility, degradation rate, protein adsorption, and allow adequate endothelialization in order to ensure better clinical outcome of BMS, reducing restenosis and thrombosis. As coating materials (i) organic polymers: polyurethanes, poly(ε-caprolactone), styrene-b-isobutylene-b-styrene, polyhydroxybutyrates, poly(lactide-co-glycolide), and phosphoryl choline; (ii) biological components: vascular endothelial growth factor (VEGF) and anti-CD34 antibody and (iii) inorganic coatings: noble metals, wide class of oxides, nitrides, silicide and carbide, hydroxyapatite, diamond-like carbon, and others are used. DES were developed to reduce the tissue hyperplasia and in-stent restenosis utilizing antiproliferative substances like paclitaxel, limus (siro-, zotaro-, evero-, bio-, amphi-, tacro-limus), ABT-578, tyrphostin AGL-2043, genes, etc. The innovative solutions aim at overcoming the main limitations of the stent technology, such as in-stent restenosis and stent thrombosis, while maintaining the prime requirements on biocompatibility, biodegradability, and mechanical behavior. This paper provides an overview of the existing stent types, their functionality, materials, and manufacturing conditions demonstrating the still huge potential for the development of promising stent solutions.

Argon plasma improves the tissue integration and angiogenesis of subcutaneous implants by modifying surface chemistry and topography

BACKGROUND

Tissue integration and vessel formation are important criteria for the successful implantation of synthetic biomaterials for subcutaneous implantation.

OBJECTIVE

We report the optimization of plasma surface modification (PSM) using argon (Ar), oxygen (O2) and nitrogen (N2) gases of a polyurethane polymer to enhance tissue integration and angiogenesis.

METHODS

The scaffold's bulk and surface characteristics were compared before and after PSM with either Ar, O2 and N2. The viability and adhesion of human dermal fibroblasts (HDFs) on the modified scaffolds were compared. The formation of extracellular matrix by the HDFs on the modified scaffolds was evaluated. Scaffolds were subcutaneously implanted in a mouse model for 3 months to analyze tissue integration, angiogenesis and capsule formation.

RESULTS

Surface analysis demonstrated that interfacial modification (chemistry, topography and wettability) achieved by PSM is unique and varies according to the gas used. O2 plasma led to extensive changes in interfacial properties, whereas Ar treatment caused moderate changes. N2 plasma caused the least effect on surface chemistry of the polymer. PSM-treated scaffolds significantly (P<0.05) enhanced HDF activity and growth over 21 days. Among all three gases, Ar modification showed the highest protein adsorption. Ar-modified scaffolds also showed a significant upregulation of adhesion-related proteins (vinculin, focal adhesion kinase, talin and paxillin; P<0.05) and extracellular matrix marker genes (collagen type I, fibronectin, laminin and elastin) and deposition of associated proteins by the HDFs. Subcutaneous implantation after 3 months demonstrated the highest tissue integration and angiogenesis and the lowest capsule formation on Ar-modified scaffolds compared with O2- and N2-modified scaffolds.

CONCLUSION

PSM using Ar is a cost-effective and efficient method to improve the tissue integration and angiogenesis of subcutaneous implants.

Functionalizing PLGA and PLGA Derivatives for Drug Delivery and Tissue Regeneration Applications

Poly(lactic-co-glycolic) acid (PLGA) is one of the most versatile biomedical polymers, already approved by regulatory authorities to be used in human research and clinics. Due to its valuable characteristics, PLGA can be tailored to acquire desirable features for control bioactive payload or scaffold matrix. Moreover, its chemical modification with other polymers or bioconjugation with molecules may render PLGA with functional properties that make it the Holy Grail among the synthetic polymers to be applied in the biomedical field. In this review, the physical-chemical properties of PLGA, its synthesis, degradation, and conjugation with other polymers or molecules are revised in detail, as well as its applications in drug delivery and regeneration fields. A particular focus is given to successful examples of products already on the market or at the late stages of trials, reinforcing the potential of this polymer in the biomedical field.

PEGylated stereocomplex polylactide coating of stent for upregulated biocompatibility and drug storage

Treatment of coronary heart disease by percutaneous coronary intervention (PCT) is usually limited to the high restenosis rate after implantation of bare-metal stent. To solve the problem, the coating of PEGylated stereocomplex poly(l-lactide) (PEG-cPLA) was utilized on the surface modification of stainless steel (SS) sheet. Specifically, the 3-aminopropyltriethoxysilane (APTES)-modified methoxy-poly(ethylene glycol)-poly(d-lactide) (mPEG-PDLA) was grafted onto the surface of hydroxylated SS sheet through coupling reaction, and poly(l-lactide)-poly(ethylene glycol)-poly(l-lactide) (PLLA-PEG-PLLA) was coated onto the surface through stereocomplex interaction between DLA and LLA units. The increase of contact angle firstly confirmed the changes of surface composition and hydrophilicity for the PEG-scPLA-modified SS sheet. The decreased fibrinogen adsorption, down-regulated platelet activation, and improved adhesion of human umbilical vein endothelial cells (HUVECs) indicated the excellent biocompatibility of PEG-scPLA-modified SS sheet. In addition, the drug loading capability of SS sheet was greatly upregulated through the formation of scPLA coating on the surface, where fluorescein (FLU) was chosen as a model molecule. Overall, the surface modification of SS sheet with PEG-scPLA could enhance the comprehensive performances, such as biocompatibility and drug loading capability, demonstrating that PEG-scPLA is a promising coating of coronary stent for PCT.

In vivo delivery and long-term tissue retention of nano-encapsulated sirolimus using a novel porous balloon angioplasty system

AIMS

Among antirestenotic compounds, sirolimus displays a superior safety profile compared to paclitaxel, but its pharmacokinetic properties make it a challenging therapeutic candidate for single-time delivery. Herein we evaluate the feasibility of delivery, long-term retention and vascular effects of sirolimus nanoparticles delivered through a novel porous angioplasty balloon in normal porcine arteries and in a swine model of in-stent restenosis (ISR).

METHODS AND RESULTS

Sirolimus nanoparticle formulation was delivered via porous balloon angioplasty to 753 coronary artery segments for pharmacokinetic studies and 26 segments for biological effect of sirolimus delivery in different clinical scenarios (de novo [n=8], ISR [n=6] and following stent implantation [n=12]). Sirolimus coronary artery concentrations were above the target therapeutic level of 1 ng/mg after 26 days, and were >100-fold higher in coronary artery treatment sites than in distal myocardium and remote tissues at all time points. At 28 days, reduction in percent stenosis in formulation-treated sites compared to balloon angioplasty treatment was noted in all three clinical scenarios, with the largest effect seen in the de novo study.

CONCLUSIONS

Local coronary delivery of sirolimus nanoparticles in the porcine model using a novel porous balloon delivery system achieved therapeutic long-term intra-arterial drug levels without significant systemic residual exposure.

Drug- and Gene-eluting Stents for Preventing Coronary Restenosis

Coronary artery disease (CAD) has been reported to be a major cause of death worldwide. Current treatment methods include atherectomy, coronary angioplasty (as a percutaneous coronary intervention), and coronary artery bypass. Among them, the insertion of stents into the coronary artery is one of the commonly used methods for CAD, although the formation of in-stent restenosis (ISR) is a major drawback, demanding improvement in stent technology. Stents can be improved using the delivery of DNA, siRNA, and miRNA rather than anti-inflammatory/anti-thrombotic drugs. In particular, genes that could interfere with the development of plaque around infected regions are conjugated on the stent surface to inhibit neointimal formation. Despite their potential benefits, it is necessary to explore the various properties of gene-eluting stents. Furthermore, multifunctional electronic stents that can be used as a biosensor and deliver drug- or gene-based on physiological condition will be a very promising way to the successful treatment of ISR. In this review, we have discussed the molecular mechanism of restenosis, the use of drug- and gene-eluting stents, and the possible roles that these stents have in the prevention and treatment of coronary restenosis. Further, we have explained how multifunctional electronic stents could be used as a biosensor and deliver drugs based on physiological conditions.

Drug loaded nanoparticle coating on totally bioresorbable PLLA stents to prevent in-stent restenosis

Biodegradable polymer poly (dl-lactide) (PDLLA) has been used as drug coating material for drug-eluting stents due to its excellent biocompatibility and sustained drug release ability. However, the uniform thin layer drug eluting coating on a stent not only inhibits the blood vessel's smooth muscle cell overgrowth but also delay the endotheliation process which is often associated with the occurrence of acute thrombosis. Therefore, in this study, we developed a novel coating method using PDLLA nanoparticles (NPs) as a coating to overcome this issue. The average 300 nm sized sirolimus-loaded PDLLA nanoparticles were prepared by a conventional emulsion solvent evaporation method. A low temperature plasma polymerization technology to graft hydrophilic polymers on to poly (l-lactide) stent was used to increase the surface coating efficiency of nanoparticles on the stent. Results showed that sirolimus-loaded nanoparticles can be successfully coated on to the stents with sustained drug release properties. In vitro cell culture study showed the drug loaded nanoparticle coating effectively inhibited the proliferation of smooth muscle cells while still allowed a faster proliferation of endothelial cells, suggesting that the new NP coated bioresorbable stents have the potential to reduce both the occurrence of in-stent restenosis and acute thrombosis. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 88-95, 2018.

Lipid-based surface engineering of PLGA nanoparticles for drug and gene delivery applications

The use of poly(lactic-co-glycolic acid) (PLGA)-based nanocarriers presents several major challenges, including their synthetic hydrophobic surface, low transfection efficiency, short circulation half-life, and nonspecific tissue distribution. Numerous engineering strategies have been employed to overcome these problems, with lipid-based surface functionalization of PLGA nanoparticles (NPs) showing promising results in the development of PLGA-based clinical nanomedicines. Surface engineering with different lipids enhances the target specificity of the carrier and improves its physicochemical properties as well as NP-cell associations, such as cellular membrane permeability, immune responses, and long circulation half-life in vivo. This review focuses on recent advances in the lipid-based surface engineering of PLGA NPs for drug and gene delivery applications.

Encapsulation and Controlled Release of Rapamycin from Polycaprolactone Nanoparticles Prepared by Membrane Micromixing Combined with Antisolvent Precipitation

Rapamycin-loaded polycaprolactone nanoparticles (RAPA-PCL NPs) with a polydispersity index of 0.006-0.073 were fabricated by antisolvent precipitation combined with micromixing using a ringed stainless steel membrane with 10 μm diameter laser-drilled pores. The organic phase composed of 6 g L^-1 PCL and 0.6-3.0 g L^-1 RAPA in acetone was injected through the membrane at 140 L m^-2 h^-1 into 0.2 wt % aqueous poly(vinyl alcohol) solution stirred at 1300 rpm, resulting in a Z-average mean of 189-218 nm, a drug encapsulation efficiency of 98.8-98.9%, and a drug loading in the NPs of 9-33%. The encapsulation of RAPA was confirmed by UV-vis spectroscopy, XRD, DSC, and ATR-FTIR. The disappearance of sharp characteristic peaks of crystalline RAPA in the XRD pattern of RAPA-PCL NPs revealed that the drug was molecularly dispersed in the polymer matrix or RAPA and PCL were present in individual amorphous domains. The rate of drug release in pure water was negligible due to low aqueous solubility of RAPA. RAPA-PCL NPs released more than 91% of their drug cargo after 2.5 h in the release medium composed of 0.78-1.5 M of the hydrotropic agent N,N-diethylnicotinamide, 10 vol % ethanol, and 2 vol % Tween 20 in phosphate buffered saline. The dissolution of RAPA was slower when the drug was embedded in the PCL matrix of the NPs than dispersed in the form of pure RAPA nanocrystals.

Doxorubicin-loaded star-shaped copolymer PLGA-vitamin E TPGS nanoparticles for lung cancer therapy

A doxorubicin-loaded mannitol-functionalized poly(lactide-co-glycolide)-b-D-α-tocopheryl polyethylene glycol 1000 succinate nanoparticles (DOX-loaded M-PLGA-b-TPGS NPs) were prepared by a modified nanoprecipitation method. The NPs were characterized by the particle size, surface morphology, particle stability, in vitro drug release and cellular uptake efficiency. The NPs were near-spherical with narrow size distribution. The size of M-PLGA-b-TPGS NPs was ~110.9 nm (much smaller than ~143.7 nm of PLGA NPs) and the zeta potential was -35.8 mV (higher than -42.6 mV of PLGA NPs). The NPs exhibited a good redispersion since the particle size and surface charge hardly changed during 3-month storage period. In the release medium (phosphate buffer solution vs. fetal bovine serum), the cumulative drug release of DOX-loaded M-PLGA-b-TPGS, PLGA-b-TPGS, and PLGA NPs were 76.41 versus 83.11 %, 58.94 versus 73.44 % and 45.14 versus 53.12 %, respectively. Compared with PLGA-b-TPGS NPs and PLGA NPs, the M-PLGA-b-TPGS NPs possessed the highest cellular uptake efficiency in A549 and H1975 cells (lung cancer cells). Ultimately, both in vitro and in vivo antitumor activities were evaluated. The results showed that M-PLGA-b-TPGS NPs could achieve a significantly higher level of cytotoxicity in cancer cells and a better antitumor efficiency on xenograft BALB/c nude mice tumor model than free DOX. In conclusion, the DOX-loaded M-PLGA-b-TPGS could be used as a potential DOX-loaded nanoformulation in lung cancer chemotherapy.

Self-assembled lysozyme/carboxymethylcellulose nanogels for delivery of methotrexate

Nanogels (NGs) were fabricated with lysozyme and carboxymethylcellulose via a green self-assembly method. The prepared NGs were characterized by dynamic light scattering (DLS), zeta potential, Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). Pyrene and isothiocyanate were introduced as fluorescent probes to research the hydrophobic area of the NGs and cells endocytosis, respectively. Methotrexate (MTX) was used to investigate the drug encapsulation property of the NGs. It turned out to be that the drug loaded NGs were regular spherical shape with a hydrodynamic diameter of about 123 nm. The drug loading efficiency was about 14.2%. The NGs can slowly release the drug and increase the bioavailability of the loaded drug. The NGs are promising carriers for the delivery of drugs and other bioactive molecules.

Nanoparticle drug- and gene-eluting stents for the prevention and treatment of coronary restenosis

Percutaneous coronary intervention (PCI) has become the most common revascularization procedure for coronary artery disease. The use of stents has reduced the rate of restenosis by preventing elastic recoil and negative remodeling. However, in-stent restenosis remains one of the major drawbacks of this procedure. Drug-eluting stents (DESs) have proven to be effective in reducing the risk of late restenosis, but the use of currently marketed DESs presents safety concerns, including the non-specificity of therapeutics, incomplete endothelialization leading to late thrombosis, the need for long-term anti-platelet agents, and local hypersensitivity to polymer delivery matrices. In addition, the current DESs lack the capacity for adjustment of the drug dose and release kinetics appropriate to the disease status of the treated vessel. The development of efficacious therapeutic strategies to prevent and inhibit restenosis after PCI is critical for the treatment of coronary artery disease. The administration of drugs using biodegradable polymer nanoparticles as carriers has generated immense interest due to their excellent biocompatibility and ability to facilitate prolonged drug release. Despite the potential benefits of nanoparticles as smart drug delivery and diagnostic systems, much research is still required to evaluate potential toxicity issues related to the chemical properties of nanoparticle materials, as well as to their size and shape. This review describes the molecular mechanism of coronary restenosis, the use of DESs, and progress in nanoparticle drug- or gene-eluting stents for the prevention and treatment of coronary restenosis.

Role of biomaterials in prevention of in-stent restenosis

Coronary balloon angioplasty and coronary stenting are the procedures used in healing coronary artery disease. However, injury of arteries during angioplasty and stenting causes cell stimulations in tissue. Cell movement and thrombosis lead to re-narrowing of widened vessel called restenosis. Several new types of carriers and technology have been developed to suppress and/or prevent restenosis. Authors review the polymeric materials featured in drug/gene carrier systems, nanovehicles, and stent coating materials against restenosis.

Rapamycin-loaded poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) nanoparticles: preparation, characterization and potential application in corneal transplantation

OBJECTIVES

Allograft rejection is the major cause of corneal graft failure. To inhibit corneal allograft rejection, rapamycin as a novel immunosuppressive agent has been discovered. However, the high water insolubility and low bioavailability of rapamycin has strongly hindered its application in the clinical setting. In this paper, we attempted to develop a novel rapamycin nano-formulation using poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCEC) nanoparticles as carrier by an emulsion evaporation method for potential application in corneal transplantation.

METHODS

The solubility of rapamycin in the nano-formulation was determined and in-vitro release studies were performed. The developed rapamycin-loaded PCEC nanoparticles were further characterized by dynamic light scattering, transmission electron microscopy, X-ray diffraction and differential scanning calorimetery. Toxicity studies were performed in eye-related cell lines.

KEY FINDINGS

The rapamycin in nano-formulation exhibited ∼10³-fold increased solubility as compared with native rapamycin. According to the results of the in-vitro cytotoxicity assay, the developed PCEC nanoparticles did not exhibit any apparent cytotoxicity against various eye-related cell lines with PCEC nanoparticle concentrations in the range of 0.05-10 mg/ml. In-vitro release study showed that the release of rapamycin was sustained from PCEC nanoparticles over a period of 48 h.

CONCLUSIONS

All the results suggested that the developed rapamycin-loaded PCEC nanoparticles might be suitable for immunosuppression in corneal transplantation by instillation administration.

Enhanced visualization of biodegradable polymeric vascular scaffolds by incorporation of gold, silver and magnetite nanoparticles

Due to improved tissue regeneration and the enabling of post-operative minimally invasive interventions in the same vessel segment, biodegradable polymeric scaffolds represent a competitive approach to permanent metallic stents in vascular applications. Despite these advantages some challenges, such as the improvement of the scaffold mechanics and enhancement of scaffold visibility during the implantation procedure, are persisting. Therefore, the scope of our studies was to investigate the potential of gold, silver and magnetite nanoparticles incorporated in a polymeric blend of poly(L-lactide)/poly(4-hydroxybutyrate) for image enhancement in X-ray, magnetic resonance or near-infrared imaging. Their impact on mechanical properties of such modified scaffold materials was also evaluated.

Influence of sirolimus-loaded nanoparticles on physiological functions of native human polymorphonuclear neutrophils

Sirolimus (SRL) is an immunosuppressive agent of high clinical relevance that has been associated with serious side effects. Biodegradable, SRL-loaded poly(d,l-lactide) nanoparticles (SRL-PLA-NPs) are being investigated as a drug delivery system to improve drug targeting. Polymorphonuclear neutrophils (PMNs) are phagocytes for particulate xenobiotics and also important trigger cells of the primary immune response. Therefore, the effects of SRL, SRL-PLA-NPs, and plain PLA-NPs on the viability of human PMNs, their essential functions, and the secretion of relevant cytokines were determined and evaluated with respect to the intracellular concentrations assessed by liquid chromatography-mass spectrometry ultra-trace analysis. For the first time to our knowledge, incorporation of NPs into PMNs was monitored by flow cytometry using fluorescence-labeled NPs. SRL accumulated intracellularly, exceeding therapeutic blood levels by a factor of two to four. Phagocytic activity was promptly reduced but recovered within 3 hours. No other parameters of the PMNs were affected. Hence, PLA-NPs appear suitable as drug carriers for SRL, allowing for better control of drug release.

FROM THE CLINICAL EDITOR

This team of authors describe the incorporation of sirolimus loaded florescent NPs into polymorphonuclear neutrophils, a process that has been monitored by flow cytometry utilizing the fluorescent properties of the polymeric NPs. SRL accumulated intracellularly, exceeding therapeutic blood levels by a factor of two to four, resulting in reduced phagocytic activity that recovered within 3 hours.

Restenosis after PCI. Part 2: prevention and therapy

The techniques and materials used during percutaneous coronary intervention have advanced considerably over the past 3 decades, yet restenosis remains one of the major drawbacks of this procedure. Many innovative technologies, including drug-eluting stents, with or without specific polymers, and fully biodegradable stents have been and continue to be developed in the search for a safe and effective antirestenosis therapy. Remarkable advances in stent design and nanoparticle delivery systems ('nanovehicles') have already fueled revolutionary changes in the prevention and treatment of in-stent restenosis. In this Review we provide an overview of the latest innovations for optimizing outcomes of coronary stenting, and up-to-date information about prevention and treatment of in-stent restenosis.

Nanotechnology for the treatment of coronary in stent restenosis: a clinical perspective

Coronary in stent restenosis remains a significant limitation to the long term efficacy of coronary artery stent placement. In this review the authors review the pathophysiology of coronary in stent restenosis, together with an overview of the current treatment modalities. The potential clinical utility of nanotechnology is also reviewed.The first human safety trial of systemic nanoparticle paclitaxel (nab-paclitaxel) for in stent restenosis (SNAPIST-I) is discussed. The results showed no significant adverse advents attributable to the nab-paclitaxel at 10 or 30 mg/m2, although moderate neutropenia, sensory neuropathy and mild to moderate reversible alopecia occurred at higher doses. No major adverse cardiac events were recorded at 2 months, whilst at 6 months, 4 target lesions required revascularisation. The investigators concluded therefore that systemic nab-paclitaxel was well tolerated at a dose of <70 mg/m2. To date however, no formal clinical evaluation has been reported as to the clinical utility of nab-paclitaxel, or any of the nano preparations discussed, for the suppression of coronary in stent restenosis.