Latent stem cell-stimulating therapy for regeneration of chronic tympanic membrane perforations using IGFBP2-releasing chitosan patch scaffolds

Tissue engineering in otology: a review of achievements

Tissue engineering application in otology spans a distance from the pinna to auditory nerve covered with specialized tissues and functions such as sense of hearing and aesthetics. It holds the potential to address the barriers of lack of donor tissue, poor tissue match, and transplant rejection through provision of new and healthy tissues similar to the host and possesses the capacity to renew, to regenerate, and to repair in-vivo and was shown to be a bypasses for any need to immunosuppression. This review aims to investigate the application of tissue engineering in otology and to evaluate the achievements and challenges in external, middle and inner ear sections. Since gaining the recent knowledge and training on use of different scaffolds is essential for otology specialists and who look for the recovery of ear function and aesthetics of patients, it is shown in this review how utilizing tissue engineering and cell transplantation, regenerative medicine can provide advancements in hearing and ear aesthetics to fit different patients' needs.

Fabrication Strategies for Engineered Thin Membranous Tissues

Thin membranous tissues (TMTs) are anatomical structures consisting of multiple stratified cell layers, each less than 100 μm in thickness. While these tissues are small in scale, they play critical roles in normal tissue function and healing. Examples of TMTs include the tympanic membrane, cornea, periosteum, and epidermis. Damage to these structures can be caused by trauma or congenital disabilities, resulting in hearing loss, blindness, dysfunctional bone development, and impaired wound repair, respectively. While autologous and allogeneic tissue sources for these membranes exist, they are significantly limited by availability and patient complications. Tissue engineering has therefore become a popular strategy for TMT replacement. However, due to their complex microscale architecture, TMTs are often difficult to replicate in a biomimetic manner. The critical challenge in TMT fabrication is balancing fine resolution with the ability to mimic complex target tissue anatomy. This Review reports existing TMT fabrication strategies, their resolution and material capabilities, cell and tissue response, and the advantages and disadvantages of each technique.

3D printing technology and applied materials in eardrum regeneration

Tympanic membrane perforation is a common condition in clinical otolaryngology. Although some eardrum patients can self-heal, a long period of non-healing perforation leads to persistent otitis media, conductive deafness, and poor quality of life. Tympanic membrane repair with autologous materials requires a second incision, and the sampling site may get infected. It is challenging to repair tympanic membranes while maintaining high functionality, safety, affordability, and aesthetics. 3D bioprinting can be used to fabricate tissue patches with materials, factors, and cells in a design manner. This paper reviews 3D printing technology that is being used widely in recent years to construct eardrum stents and the utilized applied materials for tympanic membrane repair. The paper begins with an introduction of the physiological structure of the tympanic membrane, briefly reviews the current clinical method thereafter, highlights the recent 3D printing-related strategies in tympanic membrane repair, describes the materials and cells that might play an important role in 3D printing, and finally provides a perspective of this field.

Application of New Materials in Auditory Disease Treatment

Auditory diseases are disabling public health problems that afflict a significant number of people worldwide, and they remain largely incurable until now. Driven by continuous innovation in the fields of chemistry, physics, and materials science, novel materials that can be applied to hearing diseases are constantly emerging. In contrast to conventional materials, new materials are easily accessible, inexpensive, non-invasive, with better acoustic therapy effects and weaker immune rejection after implantation. When new materials are used to treat auditory diseases, the wound healing, infection prevention, disease recurrence, hair cell regeneration, functional recovery, and other aspects have been significantly improved. Despite these advances, clinical success has been limited, largely due to issues regarding a lack of effectiveness and safety. With ever-developing scientific research, more novel materials will be facilitated into clinical use in the future.

The Dorsal Skinfold Chamber as a New Tympanic Membrane Wound Healing Model: Intravital Insights into the Pathophysiology of Epithelialized Wounds

BACKGROUND

Tympanic membrane perforations (TMPs) are a common complication of trauma and infection. Persisting perforations result from the unique location of the tympanic membrane. The wound is surrounded by air of the middle ear and the external auditory canal. The inadequate wound bed, growth factor, and blood supply lead to circular epithelialization of the perforation's edge and premature interruption of defect closure. Orthotopic animal models use mechanical or chemical tympanic membrane laceration to identify bioactive wound dressings and overcome premature epithelialization. However, all orthotopic models essentially lack repetitive visualization of the biomaterial-wound interface. Therefore, recent progress in 3D printing of customized wound dressings has not yet been transferred to the unique wound setup of the TMP. Here, we present a novel application for the mice dorsal skinfold chamber (DSC) with an epithelialized full-thickness defect as TMP model.

METHODS

A circular 2-mm defect was cut into the extended dorsal skinfold using a biopsy punch. The skinfold was either perforated through both skin layers without prior preparation or perforated on 1 side, following resection of the opposing skin layer. In both groups, the wound was sealed with a coverslip or left unclosed (n = 4). All animals were examined for epithelialization of the edge (histology), size of the perforation (planimetry), neovascularization (repetitive intravital fluorescence microscopy), and inflammation (immunohistology).

RESULTS

The edge of the perforation was overgrown by the cornified squamous epithelium in all pre-parations. Reduction in the perforation's size was enhanced by application of a coverslip. Microsurgical preparation before biopsy punch perforation and sealing with a coverslip enabled repetitive high-quality intravital fluorescence microscopy. However, spontaneous reduction of the perforation occurred frequently. Therefore, the direct biopsy punch perforation without microsurgical preparation was favorable: spontaneous reduction did not occur throughout 21 days. Moreover, the visualization of the neovascularization was sufficient in intravital microscopy.

CONCLUSIONS

The DSC full-thickness defect is a valuable supplement to orthotopic TMP models. Repetitive intravital microscopy of the epithelialized edge enables investigation of the underlying pathophysiology during the transition from the inflammation to the proliferation phase of wound healing. Using established analysis procedures, the present model provides an effective platform for the screening of bioactive materials and transferring progress in tissue engineering to the special conditions of tympanic membrane wound healing.

Chronic tympanic membrane perforation: Histopathological evidence of the experimental model

OBJECTIVES

This study aims to compare the effectiveness of three different models of chronic tympanic membrane perforations.

MATERIALS

The experimental study included 18 male chinchillas, divided into 3 equal groups. Group 1 perforations were performed with infolding technique myringotomy. Laser myringotomy was performed for perforation creation in Group 2. Group 3 perforations were performed with infolding myringotomy combined with ventilation tube insertion. At the end of the follow-up period, which lasts 8 weeks, all tympanic membranes with patent perforations were examined histologically.

RESULTS

Although, the mean perforation patency in Group 2 was significantly higher than in Group 1 (5 vs. 2.4 weeks, p < 0.01), both of them failed in creation of chronic perforation according to time parameters. Group 3 demonstrated the longest mean perforation patency among investigated models (8 weeks). In Group 3, histological examination of perforations, which were considered to be chronic, revealed, that stratified squamous epithelium continued from the lateral surface around the perforation edge to join with the medial mucosal layer of TM.

CONCLUSION

Our findings demonstrated that the combination of infolding technique and ventilation tube insertion seems to be a potential candidate for an effective animal model of tympanic membrane perforation. Further large-scale studies are required to verify our promising results.

A design-thinking approach to therapeutic translation: tympanic regeneration

PURPOSE OF REVIEW

Clinician researchers face the pressures of meeting academic benchmarks combined with advancing new therapies to patients. The vast majority of drug discoveries fail in translation. A new method of meeting the challenges of preclinical therapeutic translation is presented using the example of tympanic regeneration.

RECENT FINDINGS

The key to a design-thinking approach to therapeutic translation is to 'begin with the end in mind' by widening the scope of the problem, with multiple points of view, to not only understand the disease but the context for the patient and the health system in which it occurs. Idea for therapeutics should be tested in relevant models early and once proof of efficacy is established, translational milestones that represent the greatest risk, such as safety and toxicity should be addressed first. It is important to seek the feedback of industry early to understand what milestones should be best addressed next with limited academic resources. Whenever proceeding, guidelines for maintaining scientific reproducibility should be followed to minimize risk of failure during transfer into industry.

SUMMARY

A Design-thinking approach addresses the potential failures in drug discovery and preclinical translation.

Necessities, opportunities, and challenges for tympanic membrane perforation scaffolding-based bioengineering

Tympanic membrane (TM) perforation is a global clinical dilemma. It occurs as a consequence of object penetration, blast trauma, barotrauma, and middle ear diseases. TM perforation may lead to otitis media, retraction pockets, cholesteatoma, and conductive deafness. Molecular therapies may not be suitable to treat perforation because there is no underlying tissue matrix to support epithelium bridging. Chronic perforations are usually reconstructed with autologous grafts via surgical myringoplasty. Surgical treatment is uncomfortable for the patients. The grafting materials are not perfect because they produce an opaque membrane, fail in up to 20% of cases, and are suboptimal to restore acoustic function. Millions of patients from developing parts of the world have not got access to surgical grafting due to operational complexities, lack of surgical resources, and high cost. These shortcomings emphasize bioengineering to improve placement options, healing rate, hearing outcomes, and minimize surgical procedures. This review highlights cellular, structural, pathophysiological, and perforation specific determinants that affect healing, acoustic and surgical outcomes; and integrates necessities relevant to bioengineered scaffolds. This study further summarizes scaffolding components, progress in scaffolding strategies and design, and engenders limitations and challenges for optimal bioengineering of chronic perforation.

Can Tissue Engineering Bring Hope to the Development of Human Tympanic Membrane?

The tympanic membrane (TM), more commonly known as the eardrum, consists of a thin layer of tissue in the human ear that receives sound vibrations from outside of the body and transmits them to the auditory ossicles. The TM perforations (TMPs) are a common ontological condition, which in some cases can result in permanent hearing loss. Despite the spontaneous healing capacity of the TM to regenerate in the majority of cases of acute perforation, chronic perforations require surgical interventions. However, the disadvantages of the surgical procedure include infection, anesthetic risks, and high failure of graft patency. The tissue engineering strategy, which includes the applications of a three-dimensional (3D) scaffold, cells, and biomolecules or a combination of them for the closure of chronic perforation, has been considered as an emerging treatment. Using this approach, emerging products are currently under development to regenerate the TM structure and its properties. This research aimed to highlight the problems with the current methods of TMP treatment, and critically evaluate the tissue engineering approaches, which may overcome these drawbacks. The focus of this review is on recent literature to critically discuss the emerging advanced materials used as a 3D scaffold in the development of a TM with cellular engineering, biomolecules, cells, and the fabrications of the TM and its pathway to the clinical application. In this review, we discuss the properties of TM and the advantages and disadvantages of the current clinical products for repair and replacement of the TM. Furthermore, we provide an overview of the in vitro and preclinical studies of emerging products over the past 5 years. The results of recent preclinical studies suggest that the tissue engineering field holds significant promise.

Tissue engineering applications in otolaryngology-The state of translation

While tissue engineering holds significant potential to address current limitations in reconstructive surgery of the head and neck, few constructs have made their way into routine clinical use. In this review, we aim to appraise the state of head and neck tissue engineering over the past five years, with a specific focus on otologic, nasal, craniofacial bone, and laryngotracheal applications. A comprehensive scoping search of the PubMed database was performed and over 2000 article hits were returned with 290 articles included in the final review. These publications have addressed the hallmark characteristics of tissue engineering (cellular source, scaffold, and growth signaling) for head and neck anatomical sites. While there have been promising reports of effective tissue engineered interventions in small groups of human patients, the majority of research remains constrained to in vitro and in vivo studies aimed at furthering the understanding of the biological processes involved in tissue engineering. Further, differences in functional and cosmetic properties of the ear, nose, airway, and craniofacial bone affect the emphasis of investigation at each site. While otolaryngologists currently play a role in tissue engineering translational research, continued multidisciplinary efforts will likely be required to push the state of translation towards tissue-engineered constructs available for routine clinical use.

LEVEL OF EVIDENCE

NA.

Application of mesenchymal stem cell for tympanic membrane regeneration by tissue engineering approach

Regeneration is a biological process of cell renewal that takes place in damaged tissues or organs. It is naturally stimulated by the release of different growth factors, cytokines, surface molecules, and stem cells at the wounded sites. The tympanic membrane (TM) is an essential component of the hearing process in the auditory system, which can amplify and transmit sound vibrations through a chain of mobile ossicles. Middle ear infection, external sound pressure, insertion of sharp objects into the ear, and severe trauma are the main causes of TM perforations (TMPs), which could result in deficient hearing function. So far, otolaryngologists have employed surgical procedures (myringoplasty or tympanoplasty) to close the perforated eardrum. Because of limitations such as side effects, discomfort, and high cost to patients, there is a need for better alternatives to surgical procedures. Tissue engineering is a promising tool that can overcome the operational risk and restore, maintain, and improve the function of the TM using a range of biocompatible scaffolds, commercially available growth factors, and stem cells. Currently, multipotent mesenchymal stem cells (MSCs) are a good therapeutic option for the treatment of TMPs because of their self-renewing, and autocrine and paracrine activities. As there are fewer risks of isolation in the use of MSCs for the treatment of TMPs, they are more advantageous for tissue regeneration. The delivery of either MSCs alone or a combination of MSCs with biomaterials and growth factors (GFs) at the ruptured TM sites may enhance the activation of epithelial stem cell markers and increase the migration and proliferation of keratinocytes resulting in faster closure of TMPs. This review focuses on the current strategies used to treat TMPs and the importance of MSCs in TM regeneration. Particularly, we have discussed the synergistic effect of MSCs and scaffolds or GFs or scaffolds/GFs in TM regeneration. Finally, with the advancement of tissue engineering technologies such as 3D and 4D bioprinting, MSCs can be used to design patient-specific scaffolds, which may contain physical and chemical guidance cues to improve the extent and rate of targeted tissue regeneration.

Cell-Laden Thermosensitive Chitosan Hydrogel Bioinks for 3D Bioprinting Applications

Three-dimensional (3D) bioprinting is a technology used to deposit cell-laden biomaterials for the construction of complex tissues. Thermosensitive hydrogels are physically cross-linked by non-covalent interaction without using crosslinkers, facilitating low cytotoxicity and cell viability. Chitosan, which is a non-toxic, biocompatible and biodegradable polysaccharide, can be used as a thermosensitive hydrogel. Therefore, chitosan hydrogel could be of potential use as a 3D bioprinting ink. The purpose of this study was to develop and compare the effectivity of different bioinks based on chitosan hydrogels for 3D bioprinting. The solvent type did not affect the gel shape and gelation time, whereas acetic acid exhibited better biocompatibility compared to lactic and hydrochloric acids. The nature of the gelling agent was found to have a stronger influence on these characteristics than that of the solvent. The NaHCO3 moiety exhibited a higher growth rate of the storage modulus (G′) and a more irregular porous structure than that of the β-glycerophosphate (β-GP) and K2HPO4 groups. Cell viability, and live and dead assays, showed that the NaHCO3 group was more efficient for cell adhesion. The type of gelling agent did not lead to appreciable differences in cell-laden constructs. The NaHCO3 group was more amenable to bioprinting, compared to the β-GP and K2HPO4 groups. The chitosan hydrogel bioinks could, therefore, be good candidates for 3D bioprinting and would pave the way for patient-specific regenerative medicines.

Panel 1: Biotechnology, biomedical engineering and new models of otitis media

OBJECTIVE

To summarize recently published key articles on the topics of biomedical engineering, biotechnology and new models in relation to otitis media (OM).

DATA SOURCES

Electronic databases: PubMed, Ovid Medline, Cochrane Library and Clinical Evidence (BMJ Publishing).

REVIEW METHODS

Articles on biomedical engineering, biotechnology, material science, mechanical and animal models in OM published between May 2015 and May 2019 were identified and subjected to review. A total of 132 articles were ultimately included.

RESULTS

New imaging technologies for the tympanic membrane (TM) and the middle ear cavity are being developed to assess TM thickness, identify biofilms and differentiate types of middle ear effusions. Artificial intelligence (AI) has been applied to train software programs to diagnose OM with a high degree of certainty. Genetically modified mice models for OM have further investigated what predisposes some individuals to OM and consequent hearing loss. New vaccine candidates protecting against major otopathogens are being explored and developed, especially combined vaccines, targeting more than one pathogen. Transcutaneous vaccination against non-typeable Haemophilus influenzae has been successfully tried in a chinchilla model. In terms of treatment, novel technologies for trans-tympanic drug delivery are entering the clinical domain. Various growth factors and grafting materials aimed at improving healing of TM perforations show promising results in animal models.

CONCLUSION

New technologies and AI applications to improve the diagnosis of OM have shown promise in pre-clinical models and are gradually entering the clinical domain. So are novel vaccines and drug delivery approaches that may allow local treatment of OM.

IMPLICATIONS FOR PRACTICE

New diagnostic methods, potential vaccine candidates and the novel trans-tympanic drug delivery show promising results, but are not yet adapted to clinical use.