Hemocompatibility of hydrogel with polyethyleneoxide chains

Improving functional re-endothelialization of acellular liver scaffold using REDV cell-binding domain

Engineering of functional vascularized liver tissues holds great promise in addressing donor organ shortage for transplantation. Whole organ decellularization is a cell removal method that retains the native vascular structures of the organ such that it can be anastomosed with the recipient circulation after recellularization with healthy cells. However, a main hurdle to successful implantation of bioengineered organ is the inability to efficiently re-endothelialize the vasculature with a functional endothelium, resulting in blood clotting which is the primary cause of failure in early transplant studies. Here, we present an efficient approach for enhancing re-endothelialization of decellularized rat liver scaffolds by conjugating the REDV cell-binding domain to improve attachment of endothelial cells (EC) on vascular wall surfaces. In order to facilitate expression and purification of the peptide, REDV was fused with elastin-like peptide (ELP) that confers thermally triggered aggregation behavior to the fusion protein. After validating the adhesive properties of the REDV-ELP peptide, we covalently coupled REDV-ELP to the blood vasculature of decellularized rat livers and seeded EC using perfusion of the portal vein. We showed that REDV-ELP increased cell attachment, spreading and proliferation of EC within the construct resulting in uniform endothelial lining of the scaffold vasculature. We further observed that REDV-ELP conjugation dramatically reduced platelet adhesion and activation. Altogether, our results demonstrate that this method allowed functional re-endothelialization of liver scaffold and show great potential toward the generation of functional bioengineered liver for long-term transplantation.

STATEMENT OF SIGNIFICANCE

There is a critical need for novel organ replacement therapies as the grafts for transplantation fall short of demand. Recent advances in tissue engineering, through the use of decellularized scaffolds, have opened the possibility that engineered grafts could be used as substitutes for donor livers. However, successful implantation has been challenged by the inability to create a functional vasculature. Our research study reports a new strategy to increase efficiency of endothelialization by increasing the affinity of the vascular matrix for endothelial cells. We functionalized decellularized liver scaffold using elastin-like peptides grafted with REDV cell binding domain. We showed that REDV-ELP conjugation improve endothelial cell attachment and proliferation within the scaffold, demonstrating the feasibility of re-endothelializing a whole liver vasculature using our technique.

Nanocomposite Films of Laponite/PEG-Grafted Polymers and Polymer Brushes with Nonfouling Properties

We explore the suitability of nanocomposite thin films based on laponite nanomaterial and grafted antiadhesive polymers as transparent nonfouling surfaces. For this purpose, two polymers were chosen: a linear poly(ethylene glycol) (PEG) silane, 2-[methoxy(polyethyleneoxy)propyl]-trimethoxysilane), and thermoresponsive poly(oligo ethylene glycol)-methyl ether-methacrylate (POEGMA) brushes. PEG silane was grafted on the laponite nanoparticles in solution yielding homogeneous and transparent thin films via a dip coating procedure on glass and silicon substrates. POEGMA was grafted on laponite-(3-Aminopropyl)trimethoxysilane (APTMS) nanocomposite films that were processed similarly to PEG-silane using atom transfer radical polymerization (ATRP). Film characterization with, among others, Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), and atomic force microscopy (AFM) attests to successful grafting of the polymers to the laponite nanoparticles. In particular, evidence of basal plane expansion of laponite with increasing silane concentration are obtained using XRD, while patent morphological changes are revealed with AFM. The results are discussed in terms of the different grafting sites on laponite and compared with literature. While LP-PEG-silane is easily applied to a surface from a precursor solution via a dip coating procedure LP-APTMS-OEGMA requires lots more chemicals, a thorough control of reaction parameters, and longer reaction time in order to generate films with the desirable properties. We therefore also addressed the antifouling properties of the films. These were tested together with control samples of bare glass and laponite thin films for 30 days in an algae container. More tests were conducted with fibroblast cell cultures. Our preliminary results show that grafting of PEG containing polymers and polymer brushes alters the properties of the laponite films from fouling to nonfouling surfaces. As a first estimate, the adhesion of particles (diatoms, algae, etc.) to surfaces is reduced by approximately 85% in the case of LP-PEG-silane and up to 92% in the case of LP-APTMS-POEGMA, in comparison to the control surfaces. Furthermore, practically no cell adhesion on such surfaces could be observed.

Hydrophobic fluorescent probes introduce artifacts into single molecule tracking experiments due to non-specific binding

Single-molecule techniques are powerful tools to investigate the structure and dynamics of macromolecular complexes; however, data quality can suffer because of weak specific signal, background noise and dye bleaching and blinking. It is less well-known, but equally important, that non-specific binding of probe to substrates results in a large number of immobile fluorescent molecules, introducing significant artifacts in live cell experiments. Following from our previous work in which we investigated glass coating substrates and demonstrated that the main contribution to this non-specific probe adhesion comes from the dye, we carried out a systematic investigation of how different dye chemistries influence the behaviour of spectrally similar fluorescent probes. Single-molecule brightness, bleaching and probe mobility on the surface of live breast cancer cells cultured on a non-adhesive substrate were assessed for anti-EGFR affibody conjugates with 14 different dyes from 5 different manufacturers, belonging to 3 spectrally homogeneous bands (491 nm, 561 nm and 638 nm laser lines excitation). Our results indicate that, as well as influencing their photophysical properties, dye chemistry has a strong influence on the propensity of dye-protein conjugates to adhere non-specifically to the substrate. In particular, hydrophobicity has a strong influence on interactions with the substrate, with hydrophobic dyes showing much greater levels of binding. Crucially, high levels of non-specific substrate binding result in calculated diffusion coefficients significantly lower than the true values. We conclude that the physic-chemical properties of the dyes should be considered carefully when planning single-molecule experiments. Favourable dye characteristics such as photostability and brightness can be offset by the propensity of a conjugate for non-specific adhesion.

A systematic investigation of differential effects of cell culture substrates on the extent of artifacts in single-molecule tracking

Single-molecule techniques are being increasingly applied to biomedical investigation, notwithstanding the numerous challenges they pose in terms of signal-to-noise ratio issues. Non-specific binding of probes to glass substrates, in particular, can produce experimental artifacts due to spurious molecules on glass, which can be particularly deleterious in live-cell tracking experiments. In order to resolve the issue of non-specific probe binding to substrates, we performed systematic testing of a range of available surface coatings, using three different proteins, and then extended our assessment to the ability of these coatings to foster cell growth and retain non-adhesive properties. Linear PEG, a passivating agent commonly used both in immobilized-molecule single-molecule techniques and in tissue engineering, is able to both successfully repel non-specific adhesion of fluorescent probes and to foster cell growth when functionalized with appropriate adhesive peptides. Linear PEG treatment results in a significant reduction of tracking artifacts in EGFR tracking with Affibody ligands on a cell line expressing EGFR-eGFP. The findings reported herein could be beneficial to a large number of experimental situations where single-molecule or single-particle precision is required.

Anti-fouling bioactive surfaces

Bioactive surfaces refer to surfaces with immobilized bioactive molecules aimed specifically at promoting or supporting particular interactions. Such surfaces are of great importance for various biomedical and biomaterials applications. In the past few years, considerable effort has been made to create bioactive surfaces by forming specific biomolecule-modified surfaces on a non-biofouling "base" or "background". Hydrophilic and bioinert polymers have been widely used as anti-fouling layers that resist non-specific protein interactions. They can also serve as "spacers" to effectively move the immobilized biomolecule away from the surface, thus enhancing its bioactivity. In this review we summarize several successful approaches for the design and preparation of bioactive surfaces based on different types of anti-fouling/spacer materials. Some perspectives on future research in this area are also presented.

Protein adsorption on polyurethane catheters modified with a novel antithrombin-heparin covalent complex

Highly anticoagulant covalent antithrombin-heparin complex (ATH) was covalently grafted onto polyurethane catheters to suppress adsorption/activation of procoagulant proteins and enhance adsorption/activation of anticoagulant proteins for blood compatibility. Consistency of catheter coating was demonstrated using immunohistochemical visualization of ATH. The ability of the resulting immobilized ATH heparin chains to bind antithrombin (AT) from plasma, as measured by binding of (125)I-radiolabeled AT, was greater than that for commercially-available heparin-coated catheters, and much greater than for uncoated catheters. Complementary measurements of antifactor Xa (FXa) activity and plasma protein binding were also performed. Both ATH-coated and heparin-coated catheters demonstrated functional binding of exogenous AT. However, the ATH-coated catheters gave a trend towards elevated anti- FXa activities/AT binding ratios, consistent with the higher active pentasaccharide content in starting ATH. Western blot analysis of proteins adsorbed to catheters after incubation with rabbit plasma established protein binding profiles that showed AT and albumin as major plasma proteins adsorbed to ATH-coated catheters, while AT and altered forms of fibrinogen were major plasma protein species adsorbed to heparinized catheters.

The regulation of expanded human nasal chondrocyte re-differentiation capacity by substrate composition and gas plasma surface modification

Optimizing re-differentiation of clinically relevant cell sources on biomaterial substrates in serum containing (S+) and serum-free (SF) media is a key consideration in scaffold-based articular cartilage repair strategies. We investigated whether the adhesion and post-expansion re-differentiation of human chondrocytes could be regulated by controlled changes in substrate surface chemistry and composition in S+ and SF media following gas plasma (GP) treatment. Expanded human nasal chondrocytes were plated on gas plasma treated (GP+) or untreated (GP-) poly(ethylene glycol)-terephthalate-poly(butylene terephthalate) (PEGT/PBT) block co-polymer films with two compositions (low or high PEG content). Total cellularity, cell morphology and immunofluorescent staining of vitronectin (VN) and fibronectin (FN) integrin receptors were evaluated, while post-expansion chondrogenic phenotype was assessed by collagen types I and II mRNA expression. We observed a direct relationship between cellularity, cell morphology and re-differentiation potential. Substrates supporting high cell adhesion and a spread morphology (i.e. GP+ and low PEG content films), resulted in a significantly greater number of cells expressing alpha5beta1 FN to alpha(V)beta3 VN integrin receptors, concomitant with reduced collagen type II/ImRNA gene expression. Substrates supporting low cell adhesion and a spherical morphology (GP- and high PEG content films) promoted chondrocyte re-differentiation indicated by high collagen type II/I gene expression and a low percentage of alpha5beta1 FN integrin expressing cells. This study demonstrates that cell-substrate interactions via alpha5beta1 FN integrin mediated receptors negatively impacts expanded human nasal chondrocyte re-differentiation capacity. GP treatment promotes cell adhesion in S+ media but reverses the ability of low PEG content PEGT/PBT substrates to maintain chondrocyte phenotype. We suggest alternative cell immobilization techniques to GP are necessary for clinical application in articular cartilage repair.

Quasi-living surface graft polymerization with phosphorylcholine group(s) at the terminal end

A surface graft polymer with one or two phosphorylcholine (PC) polarheads at the terminus of the growing chain end was prepared by sequential reactions on a glass substrate. The dithiocarbamate group covalently bound to glass surfaces was derivatized with one or two PC groups and then irradiated with ultraviolet light in the presence of N,N-dimethylacrylamide (DMAAm). X-ray photoelectron spectroscopy, wettability measurements and dye staining experiment for the PC group showed that the resultant graft copolymers were produced via iniferter-based quasi-living radical polymerization, in which the polyDMAAm graft chain contains one or two PC groups at the terminal end of the graft chain. These polymer surface grafts may help provide biocompatibility.

Serum protein adsorption and platelet adhesion on pluronic-adsorbed polysulfone membranes

We examined plasma protein adsorption and platelet adhesion to polysulfone (PSf) flat membranes coated with Pluronic with varying polyethylene oxide (PEO) block length. Adsorption of albumin, globulin and fibrinogen to Pluronic-coated PSf membranes was independent of plasma dilution when concentrations of human blood plasma above 20% were applied. Increasing coating concentrations of aqueous Pluronic solution resulted in decreased protein adsorption by the PSf membranes. Pluronic F68, which was more hydrophilic than Pluronic L62 or L64 and had 80% of PEO content, was the most effective at suppressing the adsorption of plasma proteins and platelet adhesion to PSf membranes. We developed a mixed protein solution containing human albumin, gamma-globulin and fibrinogen to attempt to mimic the competitive and cooperative binding effects found in plasma. Fibrinogen adsorption from plasma could be recapitulated by the mixed protein solution. The number of platelets adhering to the PSf membranes decreased as the coating concentration of Pluronic solution was increased, and platelet adhesion decreased in parallel with fibrinogen adsorption. These results suggest that the bioinert property of PEO segments in the Pluronic, which is ascribed to their high flexibility in aqueous media, suppresses the adsorption of plasma proteins and platelets to the Pluronic-coated PSf membranes.

Surface photograft polymerization on segmented polyurethane using the iniferter technique

A segmented polyurethane (SPU) film was chloromethylated and subsequently dithiocarbamated. The treated films were immersed in solutions containing poly(ethylene glycol) methacrylate (PEGMA) or N, N-dimethyl-acryl amide (DMAAm) and irradiated with ultraviolet (UV) light. The resultant surfaces were highly wettable with water. The surface chemical compositions, as determined by X-ray photoelectron spectroscopy, indicated that surface graft polymerization, initiated from surface-derivatized dithiocarbamate, had occurred and had altered the surface properties and the composition of SPU. The platelet adhesion test using platelet-rich plasma showed minimal adhesion for the poly(PEGMA)-grafted surface, followed by the poly(DMAAm)-grafted surface.

The surface density gradient of grafted poly (ethylene glycol): preparation, characterization and protein adsorption

A surface density gradient of grafted poly (ethylene glycol) (PEG) chains was prepared using two-phase silanization of a flat silica surface. The first step was to create the surface density gradient of isocyanatopropyldimethylsilyl groups and to hydrolyze the isocyanato moiety into an amine. These surface amines were reacted with an excess of aldehyde-terminated PEG. The PEG-silica surface was characterized by dynamic contact angle measurements, X-ray photoelectron spectroscopy and ellipsometry. The length of the PEG gradient region was approximately 7 mm and the thickness in air ranged from zero to 1.1 nm. The maximum surface density of the PEG layer, as calculated from ellipsometric data, amounted to an average 0.4 PEG (molecular weight Mw = 2000 Da) molecule nm-2, while the surface density average of the amine groups was 1.4 molecules nm-2, indicating that only a fraction of the surface amines reacted with aldehyde-terminated PEG. The PEG segment density profile in the gradient PEG region was computed by a self-consistent mean field theory. The PEG (Mw = 2000 Da) segments profile was not parabolic, but showed a thin depletion zone next to the surface. The influence of the surface density of the grafted PEG chains on protein repellence was tested by the adsorption of fibrinogen from solution and from a ternary protein solution mixture containing fibrinogen, albumin and immunoglobulin G. Fibrinogen adsorption onto the silica end of the gradient was extremely low, both in the presence of the other two proteins and in their absence. As the surface density of the grafted PEG chains increased, so did the fibrinogen adsorption (up to 0.024 μg cm-2). It is not clear whether this low fibrinogen adsorption resulted from the interactions of the protein with the grafted PEG chains or with residual surface amines that were available due to some imperfections in the grafted PEG layer.

Clinical application of antithrombogenic hydrogel with long poly(ethylene oxide) chains

Thirty clinical tests on PVC drain tubes coated with hydrophilic copolymer with long poly(ethylene oxide) chains (PEO-COAT) were carried out. Controls were non-coated PVC drain tubes. Thrombogenesis was observed in 24 out of 30 non-coated PVC drain tubes (80%) and in only 4 out of 30 PEO-COAT drain tubes (13%). PEO-COAT drain tubes significantly suppressed absorption of plasma proteins and adhesion of platelets. The excellent antithrombogenic property of this hydrophilic polymer, already suggested by in vitro and in vivo experiments, was demonstrated here clinically.