Preparation and characterization of a polyurethane-based sponge wound dressing with a superhydrophobic layer and an antimicrobial adherent hydrogel layer

Bacterial infection poses a significant impediment in wound healing, necessitating the development of dressings with intrinsic antimicrobial properties. In this study, a multilayered wound dressing (STPU@MTAI2/AM1) was reported, comprising a surface-superhydrophobic treated polyurethane (STPU) sponge scaffold coupled with an antimicrobial hydrogel. A superhydrophobic protective outer layer was established on the hydrophilic PU sponge through the application of fluorinated zinc oxide nanoparticles (F-ZnO NPs), thereby resistance to environmental contamination and bacterial invasion. The adhesive and antimicrobial inner layer was an attached hydrogel (MTAI2/AM1) synthesized through the copolymerization of N-[2-(methacryloyloxy)ethyl]-N, N, N-trimethylammonium iodide and acrylamide, exhibits potent adherence to dermal surfaces and broad-spectrum antimicrobial actions against resilient bacterial strains and biofilm formation. STPU@MTAI2/AM1 maintained breathability and flexibility, ensuring comfort and conformity to the wound site. Biocompatibility of the multilayered dressing was demonstrated through hemocompatibility and cytocompatibility studies. The multilayered wound dressing has demonstrated the ability to promote wound healing when addressing MRSA-infected wounds. The hydrogel layer demonstrates no secondary damage when peeled off compared to commercial polyurethane sponge dressing. The STPU@MTAI2/AM1-treated wounds were nearly completely healed by day 14, with an average wound area of 12.2 ± 4.3 %, significantly lower than other groups. Furthermore, the expression of CD31 was significantly higher in the STPU@MTAI2/AM1 group compared to other groups, promoting angiogenesis in the wound and thereby contributing to wound healing. Therefore, the prepared multilayered wound dressing presents a promising therapeutic candidate for the management of infected wounds. STATEMENT OF SIGNIFICANCE: Healing of chronic wounds requires avoidance of biofouling and bacterial infection. However developing a wound dressing which is both anti-biofouling and antimicrobial is a challenge. A multilayered wound dressing with multifunction was developed. Its outer layer was designed to be superhydrophobic and thus anti-biofouling, and its inner layer was broad-spectrum antimicrobial and could inhibit biofilm formation. The multilayered wound dressing with adhesive property could easily be removed from the wound surface preventing the cause of secondary damage. The multilayered wound dressing has demonstrated good abilities to promote MRSA-infected wound healing and presents a viable treatment for MRSA-infected wound.

Synthesis of Novel Shape Memory Thermoplastic Polyurethanes (SMTPUs) from Bio-Based Materials for Application in 3D/4D Printing Filaments

Bio-based thermoplastic polyurethanes have attracted increasing attention as advanced shape memory materials. Using the prepolymer method, novel fast-responding shape memory thermoplastic polyurethanes (SMTPUs) were prepared from 100% bio-based polyester polyol, poly-propylene succinate derived from corn oil, diphenyl methane diisocyanate, and bio-based 1,3-propanediol as a chain extender. The morphologies of the SMTPUs were investigated by Fourier transform infrared spectroscopy, atomic force microscopy, and X-ray diffraction, which revealed the interdomain spacing between the hard and soft phases, the degree of phase separation, and the intermixing level between the hard and soft phases. The thermal and mechanical properties of the SMTPUs were also investigated, wherein a high hard segment content imparted unique properties that rendered the SMTPUs suitable for shape memory applications at varying temperatures. More specifically, the SMTPUs exhibited a high level of elastic elongation and good mechanical strength. Following compositional optimization, a tensile strength of 24-27 MPa was achieved, in addition to an elongation at break of 358-552% and a hardness of 84-92 Shore A. Moreover, the bio-based SMTPU exhibited a shape recovery of 100%, thereby indicating its potential for use as an advanced temperature-dependent shape memory material with an excellent shape recoverability.

In vitro and in vivo studies on bacteria and encrustation resistance of heparin/poly-L-lysine-Cu nanoparticles coating mediated by PDA for ureteral stent application

Ureteral stents are commonly utilized as a medical device to aid the flow of urine. However, biofilm formation and encrustation complications have been clinical problems. To overcome this challenge, heparin/poly-L-lysine-copper (Hep/PLL-Cu) nanoparticle was immobilized on a dopamine-coated polyurethane surface (PU/NPs). The stability and structural properties of the nanoparticles were characterized by Zeta potential, poly dispersion index, transmission electron microscopy, atom force microscopy and contact angle. The surface composition, antibacterial potency, encrustation resistance rate and biocompatibility of PU/NPs were investigated by scanning electron microscope, X-ray photoelectron spectroscopy, antibacterial assay and MTS assay, respectively. In addition, the anti-encrustation property was studied by implanting coated NPs stents in the rat bladder for 7 days. It was shown that the size and distribution of Hep/PLL-Cu nanoparticles were uniform. PU/NPs could inhibit Proteus mirabilis proliferation and biofilm formation, and exhibit no cytotoxicity. Less encrustation (Ca and Mg salt) was deposited both in vitro and in vivo on samples, demonstrating that the NPs coating could be a potential surface modification method of ureteral material for clinical use.

Influence of different crosslinking mixtures on the mechanical properties of composite solid rocket propellants based on HTPB

The crosslinking agent is a vital key which affects the mechanical properties of composite solid rocket propellants (CSRPs). Under this scheme, the effect of crosslinking mixtures (CMs) based on trimethylolpropane (TMP) as a triol crosslinker and butanediol (BD) as a chain extender on CSRPs based on hydroxyl-terminated polybutadiene was investigated. A series of 27 propellant compositions was formulated to study the mechanical properties of the prepared CSRPs. The effect of changing the weight ratio of TMP to BD in the CM was studied. In addition, the influence of increasing the percentage of CM (from 0% to 0.5%) in the prepared samples was investigated. Also, the effect of the CM on CSRPs containing different curing ratio of NCO/OH = 0.7, 0.75, and 0.8 was studied to generate the largest possible strain-ability with high strength over different levels of curing conditions. The mechanical characteristics (tensile strength and strain) of the prepared CSRPs have been measured and plotted versus CM content, NCO/OH and TMP:BD ratio. Generally, the addition of CM leads to a remarkable enhancement in the propellant mechanical properties. Samples containing TMP:BD (2:1) provide the highest strength while samples containing TMP:BD (1:2) show the highest strain over all the NCO/OH ratios. Formulations with TMP:BD (1:1) give high strength with moderate strain. Variation in CM content has a remarkable influence on the mechanical properties of CSRPs. A wide range of tensile strength and strain were obtained from this study to offer variety of results suitable for different applications in the CSRPs technology.

Obtaining and Characterization of a Polydisperse System Used as a Transmembrane Carrier for Isosorbide Derivatives

Due to their effect of vasodilatation, isosorbide nitrates represent one of the most important and most used solutions for angina pectoris. Unfortunately, these compounds have multiple dose-related adverse drug reactions such as headache, weakness, mild dizziness, and occasionally heart rate changes, nausea, vomiting, and sweating. The main aims of this research were to obtain and to evaluate new polyurethane (PU) structures that can be used as a proper transmembrane carrier with an improved release kinetic. Chitosan-based PU structures were obtained by a polyaddition process between hexamethylene diisocyanate and a mixture of chitosan, butanediol, and polyethylene glycol in the presence of caffeine as a synthesis catalyst. The obtained samples (with and without isosorbide nitrates) were characterized regarding the encapsulation and release rate (UV-Vis spectra), chemical composition (FTIR), thermal stability (thermal analysis), morphology changes (SEM and SANS), and in vivo irritation tests. These methods revealed no significant differences between the two sample structures. Multipopulational structures with sizes between 73 and 310 nm, with an increased tendency to form clusters and a high resistance to heat (up to 280°C), were obtained. This study presents an alternative administration of isosorbide derivatives based on a PU carrier with a high biocompatibility and a prolonged release.

Dynamic micelles with detachable PEGylation at tumoral extracellular pH for enhanced chemotherapy

Although surface PEGylation of nanomedicines can decrease serum protein adsorption in vivo, it also blocks uptake by tumor cells. This dilemma could be overcome by employing detachably PEGylated strategy at tumoral extracellular microenvironment to achieve improved cellular uptake while prolonged circulation times. Herein, the amphiphilic graft copolymers with pH-sensitive ortho ester-linked mPEG in side chains and polyurethanes in backbone, can self-assemble into the free and doxorubicin (DOX)-loaded micelles. The pH-sensitive micelles could undergo several characteristics as follows: (i) PEGylated shells for stability in sodium dodecyl sulfonate (SDS) solution; (ii) DePEGylation via degradation of ortho ester linkages at tumoral extracellular pH (6.5) for gradually dynamic size changes and effective release of DOX; and (iii) enhanced cellular uptake and cytotoxicity via positive DOX. Moreover, the dynamic micelles with detachable PEGylation could quickly penetrate the centers of SH-SY5Y multicellular spheroids (MCs) and strongly inhibit tumor growth in vitro and in vivo, and might be considered as promising and effective drug carriers in tumor therapy.

Effect of chemical structure on properties of polyurethanes: Temperature responsiveness and biocompatibility

Polyurethanes are known as one of the most biocompatible and inherently blood-compatible materials and have a wide range of applications in the medical field due to their controllable structure and properties. Durability, elasticity, elastomeric structure, fatigue resistance, versatility, and easy acceptance by the biological media after the application makes these polymers preferable in medical area. In this study, polyurethane films were prepared using poly(propylene-ethylene glycol) and either toluene-2,4-diisocyanate or 4,4′-methylenediphenyl diisocyanate without adding any other ingredients such as solvent, catalyst, or chain extender to prevent negative effects of leachable molecules. Mechanical tests were performed at room temperature while swelling tests were conducted in water and phosphate-buffered saline at 4°C, 25°C, and 37°C. Temperature responsiveness was observed for the samples synthesized using toluene-2,4-diisocyanate and poly(propylene-ethylene glycol). These samples had more than 100% swelling at 4°C and about 4% swelling at 25°C and 37°C. Cytocompatibility tests were performed by culturing the samples and their extracts with mouse fibroblast cells (L929). Viability of human umbilical vein endothelial cells was studied to examine the compatibility of the films for blood contacting devices. Both toluene-2,4-diisocyanate and 4,4-methylenediphenyl diisocyanate–based polyurethane films showed no cytotoxic effect and good biocompatibility. Oxygen plasma treatment enhanced hydrophilicity of the films. After plasma treatment, human umbilical vein endothelial cell attachment on toluene-2,4-diisocyanate–based polyurethane films improved and 4,4-methylenediphenyl diisocyanate–based polyurethane films maintained their high cell affinity. Polyurethanes presenting temperature responsiveness, high biocompatibility, and high affinity for human umbilical vein endothelial cells were synthesized in medical purity and in a reaction media involving only diisocyanate and diol components without addition of any solvent, chain extender, or catalyst. Polyurethanes with these properties and as produced in this study are reported for the first time in the literature.

Surface immobilization of kanamycin-chitosan nanoparticles on polyurethane ureteral stents to prevent bacterial adhesion

Bacterial adhesion is a major problem that can lead to the infection of implanted urological stents. In this study, kanamycin-chitosan nanoparticles (KMCSNPs) were immobilized on the surface of a polyurethane ureteral stent (PUS) to prevent urinary bacterial infection. KMCSNPs were synthesized using the ionic gelation method. The synthesized KMCSNPs appeared spherical with a ζ-average particle size of 225 nm. KMCSNPs were immobilized on the PUS surface by covalent immobilization techniques. The surface-modified PUS was characterized using attenuated total reflectance Fourier transform infrared spectroscopy, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. The surface-modified PUS showed significantly increased antibacterial activity against Escherichia coli MTCC 729 and Proteus mirabilis MTCC 425 relative to the surface of an unmodified PUS. These findings suggest that the KMCSNP-immobilized PUS has the potential to prevent bacterial infection in the human urinary tract.

Synthesis of polycarbonate urethane elastomers and effects of the chemical structures on their thermal, mechanical and biocompatibility properties

In this study, to obtain biomedical polyurethane elastomers with good mechanical properties and biocompatibility, a series of polycarbonate urethanes were synthesized via a two-step solution of polymerization method using the poly(1,6-hexanediol)carbonate diols (PCDL) as the soft segment, 4,4′-methylenebis(cyclohexyl isocyanate) (H₁₂MDI), 1,6-hexamethylene diisocyanate (HDI) and 1,4-butanediol (BDO) as the hard segment with dibutyltin dilaurate as the catalyst. In this article, we illustrated the physical behaviors were obviously influenced by synthetic routes. And their chemical and physical structures were investigated by gel permeation chromatograph (GPC), differential scanning calorimeter (DSC), fourier transform infrared spectrography (FT-IR) and mechanical properties tests. The surface wettability were studied by contact angle measurement (CA). As a kind of short-term implant biomaterial, the results of the hemolysis and platelet adhesive tests were recorded by spectrophotometer and scanning electron microscopy (SEM), indicating the materials have a great potential for developments and applications in biomedical field.

Immobilization of heparin on chitosan-grafted polyurethane films to enhance anti-adhesive and antibacterial properties

Infections caused by bacteria adhering to implant surfaces are one of the main reasons for the failure of the implants. In this study, polyurethane (PU), which is the most commonly used polymer in the production of medical devices, was synthesized and surfaces of polyurethane films were modified by chitosan (CH) grafting and heparin (Hep) immobilization in order to enhance anti-adhesiveness and antibacterial properties. Functional groups present on the surface, topographical shapes, and free energies of the polyurethane films were determined. Pristine polyurethane, chitosan-grafted polyurethane (PU–CH), and heparin immobilized polyurethane (PU–CH–Hep) films demonstrated high anti-adhesive efficacy against bacteria in the given order, where PU–CH–Hep was the most effective one. When PU–CH–Hep samples were incubated with different bacteria, complete death was observed for Pseudomonas aeruginosa (Gram negative), Staphylococcus aureus (Gram positive), and Staphylococcus epidermidis (Gram positive). Some living Escherichia coli (Gram negative) were observed after 24 h of incubation. Pristine and modified polyurethane samples demonstrated no adverse effect on proliferation of L929 fibroblast cells and were found to be biocompatible according to MTT cytotoxicity tests.

Bactericidal effect on Foley catheters obtained by plasma and silver nitrate treatments

New medical, materials, and surgical procedures keep improving current health-care practices. Many of these innovations involve polymeric devices that must meet certain clinical and cost requirements. Novel antimicrobial technologies and nanotechnologies are being implemented in more applications such as implant interphases, coatings, and others to avoid postoperatory infections. Here we present a novel approach to create antimicrobial surfaces on Foley catheters widely used in hospitals in order to avoid a variety of harms including infection, pain, and trauma. The combination of plasma and silver nitrate wet treatments demonstrates to be a fast, easy, and convenient method for obtaining colonization-resistant catheter surfaces.

Thermal behavior, surface energy analysis, and hemocompatibility of some polycarbonate urethanes for cardiac engineering

The understanding of basic surface properties and the relationships between temperature and the configuration of the polymer surface are the key to further understand the first interaction mechanism of the polymer with the body. To this end, some poly(carbonate tetramethylene ether)urethane (PCEU), poly(carbonate siloxane tetramethylene ether)urethane (PCSiEU), and their 1:1 gravimetric mixture (PCEU/PCSiEU) membranes were prepared. In order to establish the relationships between temperature and the chemical structure of polymer surface, the polyurethane (PU) membranes were analyzed by attenuated total reflectance–Fourier transform infrared spectroscopy. The temperature has a significant influence on these PU surface structures. Surface characteristics such as wettability and surface free energy were also analyzed since the interaction between biomaterials and blood occurs at their interface. The preliminary cytotoxicity screening showed no cytotoxicity of these PU membranes. The PU samples do not accelerate the clot formation mechanisms under the tested conditions. The results suggest that these PU membranes are promising materials for the preparation of cardiovascular scaffolds.

Novel multifunctional nanofibers based on thermoplastic polyurethane and ionic liquid: towards antibacterial, anti-electrostatic and hydrophilic nonwovens by electrospinning

Novel antibacterial, anti-electrostatic, and hydrophilic nanofibers based on a blend containing thermoplastic polyurethane (TPU) and a room-temperature ionic liquid (IL), 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF6], were fabricated by electrospinning. We investigated the effect of the IL on the morphology and the physical properties of the TPU nanofibers. Nanofibers with a 'bead-on-string' morphology were obtained by electrospinning from a neat TPU solution. The incorporation of the IL, at levels as low as 1 wt%, largely suppressed the formation of beads during electrospinning, and homogeneous nanofibers were obtained. The as-spun TPU/IL composite nanofibers showed significant activity against both Escherichia coli (E coli) and Staphylococcus aureus (S. aureus), with antibacterial activities of more than four and three, respectively. This means that the antibacterial efficiencies of TPU/IL composite nanofibers toward E coli and S. aureus are 99.99% and 99.9%, respectively. Moreover, nonwoven fabrics derived from the electrospun TPU/IL composite nanofibers exhibit better stretchability, elasticity, and higher electrical conductivity compared to those made using neat TPU without an IL. Additionally, the incorporation of the IL leads to a hydrophilic surface for the TPU/IL composite nanofibers compared to hydrophobic neat TPU nanofibers. These multifunctional nanofibers with excellent antibacterial, anti-electrostatic, and mechanical properties and improved hydrophilicity are promising candidates for biomedical and wastewater treatment applications.

Saline-enabled self-healing of polyelectrolyte multilayer films

After introducing a third polyelectrolyte, the healing ability of polyelectrolyte multilayer film fabricated by LbL technique is largely enhanced, and can undergo rapid healing of several tens of micrometer-sized cuts when exposed to normal saline.

Synthesis and surface modification of polyurethanes with chitosan for antibacterial properties

Surface modification and providing antibacterial properties to the materials or devices are getting great attention especially in the last decades. In this study, polyurethane (PU) films were prepared by synthesizing them in medical purity from toluene diisocyanate and polypropylene ethylene glycol without using any other ingredients and then the film surfaces were modified by covalent immobilization of chitosan (CH) which has antibacterial activity. CH immobilized PU films (PU-CH) were found to be more hydrophilic than control PU films. Electron Spectroscopy for Chemical Analysis (ESCA) and Atomic Force Microscopy (AFM) analyses showed higher nitrogen contents and rougher surface topography for PU-CH compared to PU films. Modification with CH significantly increased antibacterial activity against Gram positive (Staphylococcus aureus) and Gram negative (Pseudomonas aeruginosa) bacteria. It was observed that the number of bacteria colonies were less about 10(2)-10(5) CFU/mL and number of attached viable bacteria decreased significantly after CH modification of PU films.

Synthesis and characterization of poly(arylene ether ketone) copolymers with pendant carboxylic acid groups for antifouling ultrafiltration membrane

This work focused on the synthesis of a series of poly(arylene ether ketone) random copolymers with various controlled pendant carboxylic acid groups (PEAK-COOH) by direct copolymerization method and the preparation of antifouling ultrafiltration membranes via the conventional immersion precipitation phase inversion method. The morphologies of the PEAK-COOH membranes were investigated by scanning electron microscopy. In addition, the surface hydrophilicity and charged property of the PEAK-COOH membranes were studied by water contact angle and membrane potential measurements, and the results indicated that the introduction of COOH on the polymer chains of membrane materials was really an effective way to negatively charge the membrane and enhance the hydrophilicity. The pure water flux and protein solution permeation through the prepared membranes were increased with the increase in the content of carboxylic acid groups. The cycle ultrafiltration experiments for protein solution revealed that nonspecific protein adsorption, especially irreversible protein adsorption, for the PEAK-COOH membranes, was significantly reduced, suggesting superior antifouling performance.