Fabrication of Ni-Polyaniline/Graphene Oxide Composite Electrode with High Capacitance and Water Splitting Activity

The Ni-PANI@GO composite electrode was fabricated via cost effective electrodeposition technique. According to the XRD, FTIR, Raman, SEM, and XPS analyses revealed that the nickel doped PANI@GO composite has been fabricated on the surface of the nickel foam. Addition of nickel significantly enhanced interaction between graphene with PANI leading to higher degree of polyaniline doping though imine groups. Electrochemical investigation revelated the significant performance of the Ni-PANI@GO composite electrode, boosting an impressive capacitance of 4480 F/g at 40 A/g, surpassing previous Ni-foam-based binder-free electrodes. Notably, Ni-PANI@GO electrode displayed excellent catalytic activity in both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), generating a considerable volume of the gas bubbles at relatively modest overpotentials of 279 mV and 244 mV respectively. This event allows for the achievement of 20 mA cm-2 current density. Furthermore, in the laboratory-scale water electrolyzer, a low cell voltage of 1.72 V was achieved, facilitating a water-splitting current density of 20 mA cm-2. This study underscores the premising potential for the real-world device's application of the versatile Ni-PANI@GO composite electrode.

Recent advances in conducting polymer-based magnetic nanosorbents for dyes and heavy metal removal: fabrication, applications, and perspective

Globally, treating and disposing of industrial pollutants is a techno-economic challenge. Industries' large production of harmful heavy metal ions (HMIs) and dyes and inappropriate disposal worsen water contamination. Much attention is required on the development of efficient and cost-effective technologies and approaches for removing toxic HMIs and dyes from wastewater as they pose a severe threat to public health and aquatic ecosystems. Due to the proven superiority of adsorption over other alternative methods, various nanosorbents have been developed for the efficient removal of HMIs and dyes from wastewater and aqueous solutions. Being a good adsorbent, conducting polymer-based magnetic nanocomposites (CP-MNCPs) has drawn more attention for HMIs and dye removal. Conductive polymers' pH-responsiveness makes CP-MNCP ideal for wastewater treatment. The composite material absorbed dyes and/or HMIs from contaminated water could be removed by changing the pH. Here, we review the production strategies and applications of CP-MNCPs for HMIs and dye removal. The review also sheds light on the adsorption mechanism, adsorption efficiency, kinetic and adsorption models, and regeneration capacity of the various CP-MNCPs. To date, various modifications to conducting polymers (CPs) have been explored to improve the adsorption properties. It is evident from the literature survey that the combination of SiO₂, graphene oxide (GO), and multi-walled carbon nanotubes (MWCNTs) with CPs-MNCPs enhances the adsorption capacity of nanocomposites to a large extent, so future research should lean toward the development of cost-effective hybrid CPs-nanocomposites.

Hydrothermal synthesis of polyaniline nanospheres coupled with graphene oxide for enhanced specific capacitance performances

Polyaniline is one of the most common electrode materials for supercapacitors. The morphology of polyaniline directly affects the properties of polyaniline. In this paper, a new method for preparing hollow polyaniline nanospheres is described. Polyaniline-S with solid and hollow structures are successfully synthesized by the hydrothermal method, through varying the amounts of the catalyst and oxidant. The prepared hollow nanospheres have uniform particle size, a smooth surface, and uniform wall thickness. The hollow structure provides rapid permeability to the material, facilitating the transfer and transport of charges and ions in the electrolyte, and it can also act as an ion storage tank to increase the accumulation of ions inside. The specific capacitance of polyaniline-S is high at 235 F g-1 at 0.5 A g-1. To reduce the aggregation of polyaniline-S and improve the electrochemical activity, polyaniline-S, and graphene oxide are composited using the interfacial electrostatic interaction. The content of graphene oxide has a significant influence on the electrochemical performance of the composites. The specific capacitance of the polyaniline-S/ graphene oxide composite with a 10% loading amount of graphene oxide reaches 535 F g-1 at 0.5 A g-1, increase of nearly 128% compared to representing a significant polyaniline-S. The specific capacitance retention rate is 93.6% after 10,000 cycles.

Geomimetic Hydrothermal Synthesis of Polyimide-Based Covalent Organic Frameworks

Despite its abundance, water is not widely used as a medium for organic reactions. However, under geothermal conditions, water exhibits unique physicochemical properties, such as viscosity and a dielectric constant, and the ionic product become similar to those of common organic solvents. We have synthesized highly crystalline polyimide-based covalent organic frameworks (PICs) under geomimetic hydrothermal conditions. By exploiting triphenylene-2,3,6,7,10,11-hexacarboxylic acid in combination with various aromatic diamines, PICs with various pore dimensions and crystallinities were synthesized. XRD, FT-IR, and DFT calculations revealed that the solubility of the oligomeric intermediates under hydrothermal conditions affected the stacking structures of the crystalline PICs. Furthermore, the synthesized PICs demonstrate promising potential as an anode material in lithium-ion batteries owing to its unique redox-active properties and high surface area.

Electrochemical fabrication of polyaniline/graphene paper (PANI/GP) supercapacitor electrode materials on free-standing flexible graphene paper

Free-standing flexible supercapacitive electrodes have practical application for wearable energy storage devices. In this paper, graphene paper (GP), a flexible electrode substrate, was prepared by one-step reduction of graphene oxide (GO) using HI solution. GP can be used independently as a flexible electrode with specific capacitance of 227 F/g. In order to make up for the shortage of GP specific capacitance storage, polyaniline (PANI) with high specific capacitance and good electrical conductivity was selected to composite with GP by electrochemical polymerization approach. This method to fabricate electrode material by direct electrochemical polymerization avoids the use of conductive binder and organic solvent. Owing to the specific capacitance contribution of PANI and GP, the PANI/GP composites exhibit higher specific capacitance when the polymerization time is 30 s and the polymerization voltage is 0.8 V. At 1 A/g current density, the specific capacitance of composite is up to 759 F/g, which is 3.34 times of neat GP.

Smart-Fabric-Based Supercapacitor with Long-Term Durability and Waterproof Properties toward Wearable Applications

The rapid development of wearable electronics and smart textiles has dramatically motivated the generation of flexible textile-based supercapacitors (SCs). However, the rapid evaporation of water moisture in gel electrolyte substantially limits the working durability and performance enhancements of the flexible devices. Therefore, a high-performance multifunctional textile-based SC with long-term durability is highly desired. Herein, a poly(vinyl alcohol) (PVA)/polyacrylamide (PAM) composite gel electrolyte was developed to fabricate multifunctional device with water-retaining and water-proofing properties based on multidimensional hierarchical fabric. And the assembled SC based on composite gel exhibited a superior water-retaining property and long-term working durability (93.29% retention rate after operation for 15 days), whereas the performance of SC based on pure PVA gel declined sharply and only 43.2% capacitance remained. In addition, the assembled SC exhibited enhanced specific capacitance of 707.9 mF/cm² and high energy density of 62.92 μWh/cm² and maintained a good stability of 80.8% even after 10 000 cyclic tests. After water repellency treatment, the integrated device immersed in water could still work normally. What's more, the assembled devices could be charged by a portable hand generator, which could be potentially applied for field rescue and military applications. We foresee that this strategy would be a potential route to prepare high-performance multifunctional textile-based SCs for wearable electronic systems and smart textile applications.