Evidence for bacterial causation of adverse pulpal responses in resin-based dental restorations

Advances in clinical diagnosis and management of amelogenesis imperfecta in children and adolescents

OBJECTIVE

To summarize studies published between 2017 and 2023 examining the clinical diagnosis and restorative management of amelogenesis imperfecta (AI) in children and adolescents.

DATA

The review incorporated publications on clinical diagnosis, patient-reported outcomes, clinical trials, cohort studies, and case reports that included individuals below 19 years of age with non-syndromic AI.

SOURCES

A literature search was conducted across electronic databases, PubMed, Web of Science, and CINAHL, including papers published between 2017 and 2023. The search yielded 335 unique results, of which 38 were eligible for inclusion.

RESULTS

New evidence on the genetic background of AI makes it now advisable to recommend genetic testing to supplement a clinical AI diagnosis. The discussions of the dental profession and the public on social media do not always incorporate recent scientific evidence. Interview studies are finding that the impact of AI on quality of life is more severe than previously appreciated. New evidence suggests that single-tooth ceramic crowns should be the first choice of treatment. Due to incomplete reporting, case reports have been of limited value.

CONCLUSION

In young patients with AI symptoms of pain and hypersensitivity decreased, and aesthetics were improved following all types of restorative therapy. Resin composite restorations were mainly performed in cases with hypoplastic AI and mild symptoms. Single tooth ceramic crown restorations have a high success rate in all types of AI and can be used in young individuals with AI.

CLINICAL SIGNIFICANCE

Prosthetic rehabilitation in adolescents with severe AI is cost effective, improves esthetics, reduces tooth sensitivity, and improves oral health-related quality of life.

Assessment of dental pulp response to carries via MR T2mapping and histological analysis

OBJECTIVES

The aim of our study was to assess the correlation between T2 relaxation times and their variability with the histopathological results of the same teeth in relation to caries progression.

MATERIALS AND METHODS

52 extracted permanent premolars were included in the study. Prior to extractions, patients underwent magnetic resonance imaging (MRI) scanning and teeth were evaluated using ICDAS classification. Pulps of extracted teeth were histologically analysed.

RESULTS

MRI T2 relaxation times (ms) were 111,9 ± 11.2 for ICDAS 0, 132.3 ± 18.5* for ICDAS 1, 124.6 ± 14.8 for ICDAS 2 and 112. 6 ± 18.2 for ICDAS 3 group (p = 0,013). A positive correlation was observed between MRI T2 relaxation times and macrophage and T lymphocyte density in healthy teeth. There was a positive correlation between vascular density and T2 relaxation times of dental pulp in teeth with ICDAS score 1. A negative correlation was found between T2 relaxation times and macrophage density. There was a positive correlation between T2 relaxation time variability and macrophage and T lymphocyte density in teeth with ICDAS score 2. In teeth with ICDAS score 3, a positive correlation between T2 relaxation times and T2 relaxation time variability and lymphocyte B density was found.

CONCLUSION

The results of our study confirm the applicability of MRI in evaluation of the true condition of the pulp tissue.

CLINICAL RELEVANCE

With the high correlation to histological validation, MRI method serves as a promising imaging implement in the field of general dentistry and endodontics.

Loss of pulp vitality correlated with the duration of the interim restoration and the experience of the dentist: A retrospective study

STATEMENT OF PROBLEM

The second most common biological complication in fixed prosthodontics is loss of pulp vitality, which may lead to restoration loss. While reasons for loss of pulp vitality are unclear, 2 potential contributing factors, duration of the interim restoration and operator experience, have not been fully investigated.

PURPOSE

The purpose of this retrospective study was to investigate whether the duration of the interim restoration or the experience of the dentist was correlated with loss of pulp vitality.

MATERIAL AND METHODS

Fixed prosthetic restorations placed between 2005 and 2012 were retrospectively analyzed. Abutment teeth supporting single-unti or multiunit restorations were evaluated regarding loss of pulp vitality. The Mann-Whitney U test and simple logistic regression were used, with α=.05 for the subsequent multiple logistic regression. The experience of dental professionals was defined by the number of treatments performed and coupled with failure rate by using an analysis of variance.

RESULTS

One hundred seventy-four dentists made 15 879 restorations, of which 1136 failed during the observation period, a failure rate of 7.2%. Two hundred fifty restorations were randomly selected from the failed restorations, and a corresponding 250 restorations were randomly selected from nonfailed restorations for the control group. Increased duration with interim replacement was linked to a higher risk of loss of pulp vitality (P<.001). Failure rate in the dentist group varied from 0% to 100%. No significant differences in failure rate were found among dentists who did few restorations and those who performed larger numbers of restorations.

CONCLUSIONS

The results of the present study suggest that operator experience does not affect failure rate. However, extended time with an interim restoration was a contributing factor to the loss of pulp vitality.

Periapical Status of Non-Root-Filled Teeth With Amalgam, Composite, or Crown Restorations: A Cross-Sectional Study

OBJECTIVES

This study aimed to evaluate the periapical status (PAS) of restored non-root-filled (RNRF) teeth amongst a group of patients attending dental teaching clinics at Jordan University of Science & Technology. It also aimed to assess the association of type and quality of coronal restorations and periapical disease.

METHODS

This was a cross-sectional study. To be included, participants needed to have at least 1 non-root-filled tooth restored with either direct or indirect restoration. A sample of 491 participants was examined. Clinical examination and digital periapical radiographs were used to record material used and assess the quality of the restorations. Chi-square test and logistic regression analysis were used to analyse the association between PAS and gender, age, restoration material/type, and quality.

RESULTS

Overall, 26.3% of the participants were diagnosed with apical periodontitis (AP) on 1 or more of the examined teeth. No significant differences in the prevalence of AP were observed when comparing amalgam to composite or indirect restorations (P = .386). Furthermore, no association was reported between AP and gender or age, while a significant association was observed with the restoration's quality (P < .001).

CONCLUSIONS

The high prevalence of AP in the examined sample is of clinical concern and suggests that more attention should be directed towards dental health awareness in Jordan. Teeth restored with inadequate restorations were twice as likely to have AP.

Bacteria in the cavity-restoration interface after varying periods of clinical service - SEM description of distribution and 16S rRNA gene sequence identification of isolates

OBJECTIVES

To use extracted human teeth with amalgam (n = 26) or GIC (n = 3) restorations in service up to 20 years to evaluate microbiota at the cavity/restoration interface by SEM or culture.

MATERIALS AND METHODS

Extracted teeth with intracoronal restorations (n = 20) of known history (2-20 years) were fixed, split, and prepared for SEM to ascertain the pattern and structure of bacterial aggregates on cavity and restoration surfaces. Another 9 teeth were anaerobically decontaminated, split and sampled (cavity/restorations), and cultured (anaerobically, aerobically); recovered isolates were identified by 16S rRNA gene sequencing.

RESULTS

SEM showed rods, cocci, and filaments in 11/20 teeth (55%) on cavity and corresponding restoration surfaces; 4/20 (20%) on neither surface; 1/20 (5%) on just cavity; and 4/20 (20%) on just restoration. Microbial growth extended from marginal openings into the deeper interfacial microspace to varying extents but was not always evident. Restoration size or age did not predict bacterial presence. Bacteria-free surfaces (cavity/amalgam) showed possible calcification. Cultivation yielded 160 isolates, mainly Gram-positive (86%) and facultative (81%); and morphotypes of rods (43%), cocci (36%), and cocco-bacilli (18%) belonging to Actinobacteria (45%) and Firmicutes (50%). The most frequent genera were Staphylococcus, Streptococcus, Actinomyces, and Lactobacillus. Biofilms on cavity and restoration appeared independent of each other.

CONCLUSIONS

Cavity and amalgam surfaces were independently colonised and some not. The penetration of microbiota into marginal gaps varied; resembled root caries and was dominated by Gram-positive species.

CLINICAL RELEVANCE

Marginal gaps around restorations are unavoidable but are not always colonised by bacteria after long-term clinical service. Calcification of biofilms in the restorative interface may prevent further colonisation. The viable microbiota in the restorative interface resembled root caries and may be subject to ecological fluxes of activity and arrest and therefore preventative management.

Leptin in Dental Pulp and Periapical Tissues: A Narrative Review

Leptin is a non-glycosylated 16 kDa protein synthesized mainly in adipose cells. The main function of leptin is to regulate energy homeostasis and weight control in a central manner. There is increasing evidence that leptin also has systemic effects, acting as a link between innate and acquired immune responses. The expression of leptin and its receptor in human dental pulp and periradicular tissues have already been described, as well as several stimulatory effects of leptin protein expression in dental and periodontal tissues. The aim of this paper was to review and to compile the reported scientific literature on the role and effects of leptin in the dental pulp and periapical tissues. Twelve articles accomplished the inclusion criteria, and a comprehensive narrative review was carried out. Review of the available scientific literature concluded that leptin has the following effects on pulpal and periapical physiology: 1) Stimulates odontogenic differentiation of dental pulp stem cells (DPSCs), 2) Increases the expression of dentin sialophosphoprotein (DSPP) and dentin matrix protein-1 (DMP-1), odontoblastic proteins involved in odontoblastic differentiation and dentin mineralization, 3) Stimulates vascular endothelial growth factor (VEGF) expression in human dental pulp tissue and primary cultured cells of human dental pulp (hDPCs), 4) Stimulates angiogenesis in rat dental pulp cells, and 5) Induces the expression of interleucinas 6 and 8 in human periodontal ligament cells (hPDLCs). There is evidence which suggests that leptin is implicated in the dentin mineralization process and in pulpal and periapical inflammatory and reparative responses.

EZH2 Promotes Extracellular Matrix Degradation via Nuclear Factor-κB (NF-κB) and p38 Signaling Pathways in Pulpitis

Pulpitis is a complicated chronic inflammatory process which can be in a dynamic balance between damage and repair. The extracellular matrix plays an important regulatory role in wound healing and tissue repair. The aim of this study was to explore the role of the epigenetic mark, enhancer of zeste homolog 2 (EZH2) on the degradation of extracellular matrix during pulpitis. Quantitative polymerase chain reaction was used to assess the expression of matrix metalloproteinases (MMPs) and type I collagen in human dental pulp cells (HDPCs) upon EZH2 and EI1 (EZH2 inhibitor) stimulation. The mechanism of EZH2 affecting extracellular matrix was explored through quantitative polymerase chain reaction and Western blot. A rat model of dental pulp inflammation was established, and the expression of type I collagen in dental pulp under EZH2 stimulation was detected by immunohistochemical staining. EZH2 upregulated the expression of MMP-1, MMP-3, MMP-8, and MMP-10 and decreased the production of type I collagen in HDPCs, while EI1 had the opposite effect. EZH2 activated the nuclear factor-kappa B (NF-κB) and p38 signaling pathways in HDPCs, the inhibition of which reversed the induction of MMPs and the suppression of type I collagen. EZH2 can downregulate the type I collagen levels in an experimental model of dental pulpitis in rats. EZH2 promotes extracellular matrix degradation via nuclear factor-κB (NF-κB) and P38 signaling pathways in pulpitis. EZH2 can decrease the type I collagen levels in vivo and in vitro.

Radiographic periapical healing associated with root-treated teeth accessed through existing crowns: a historical controlled cohort study

OBJECTIVES

The aim of this study was to determine the periapical healing rate and complications arising from non-surgical root canal treatment (NSRCT) conducted through the existing and retained restoration, compared to that conducted after removal of restoration (direct or indirect) with subsequent placement of a new crown.

MATERIALS AND METHODS

Two-hundred-and-forty-five teeth met the inclusion criteria and were followed up for 2 years. One-hundred-and-six teeth had NSRCT completed through existing cast restorations, and 57 and 82 had the existing crowns and direct restorations removed (respectively) and received a new crown after NSRCT. Periapical healing was assessed radiographically using strict (complete healing) and loose (complete and incomplete healing) criteria. Multivariable logistic regression models were used to investigate the effect of prior restoration removal on periapical healing following NSRCT, adjusting for potential confounding (p < 0.05).

RESULTS

There was no significant (p > 0.05) difference in the periapical healing rates amongst teeth accessed through existing crowns (72%, 90%) versus those where crowns (79%, 93%) or direct restorations (77%, 90%) were removed for NSRCT. The findings were adjusted for the significant influencing factor: size of pre-operative radiolucency (p < 0.05). Of the 109 teeth that were initially accessed through existing crowns, 9 (8%) displayed porcelain fracture or crown de-cementation.

CONCLUSION

Performing root canal treatment through an existing full coverage restoration did not compromise periapical healing and was associated with a low incidence of associated complications.

CLINICAL RELEVANCE

Crown removal before NSRCT is not mandatory for periapical healing but requires a judicious pre-assessment of current and future marginal and restorative integrity.

Biocompatibility assessment of resin-based cements on vascularized dentin/pulp tissue-engineered analogues

OBJECTIVES

A three-dimensional (3D) dentin/pulp tissue analogue, resembling the human natural tissue has been engineered in an in vitro setup, aiming to assess the cytocompatibility of resin-based dental restorative cements.

METHODS

Stem Cells from Apical Papilla (SCAP) and Human Umbilical Vein Endothelial Cells (HUVEC) were embedded in Collagen-I/Fibrin hydrogels at 1:3 ratio within 24-well plates. Hanging culture inserts were placed over the hydrogels, housing an odontoblast-like cell layer and a human treated-dentin barrier. Shear modulus of the hydrogels at 3.5 and 5 mg/ml was evaluated by dynamic mechanical analysis. Eluates of two resin-based cements, a dual-cure- (Breeze™, Pentron: Cement-1/C1), and a self-adhesive cement (SpeedCEMplus™, Ivoclar-Vivadent: Cement-2/C2) were applied into the dentin/pulp tissue analogue after pre-stimulation with LPS. Cytocompatibility was assessed by MTT assay, live/dead staining and real-time PCR analysis.

RESULTS

Both hydrogel concentrations showed similar shear moduli to the natural pulp until day (D) 7, while the 5 mg/ml-hydrogel substantially increased stiffness by D14. Both cements caused no significant toxicity to the dentin/pulp tissue analogue. C1 induced stimulation (p < 0.01) of cell viability (158 ± 3%, 72 h), while pre-stimulation with LPS attenuated this effect. C2 (±LPS) caused minor reduction of viability (15-20%, 24 h) that recovered at 72 h for the LPS+ group. Both cements caused upregulation of VEGF, ANGP-1, and downregulation of the respective receptors VEGFR-2 and Tie-1.

SIGNIFICANCE

Both resin-based cements showed good cytocompatibility and triggered angiogenic response within the dentin/pulp tissue analogue, indicating initiation of pulp repair responses to the released xenobiotics.

Evaluation of human pulp tissue response following direct pulp capping with a self-etching adhesive system containing MDPB

This study evaluated the human pulp tissue response following direct pulp capping with Clearfil Protect Bond (CPB) self-etching adhesive containing an antibacterial monomer MDPB. The pulps of third molar teeth were exposed by the removal of carious tissue. In an experimental group, CPB was applied to the exposed pulp and dentin. In the control groups, Clearfil SE Bond (CSE) or calcium hydroxide-based cement (CH) was applied to the exposed pulp surfaces. All teeth were filled with resin composite, extracted after 90 days, and the pulp responses were histologically analyzed. No severe inflammation or soft tissue disorganization was observed in CPB and CH groups. CSE group exhibited a disorganized odontoblastic layer and severe inflammatory infiltration. No hard tissue formation was observed in CSE group, and CH formed more of a hard tissue formation than CPB. CPB induced an acceptable healing response when directly applied to exposed pulps with bacterial contamination.

Material Pulp Cells and Tissue Interactions

Two increasingly common endodontic procedures, vital pulp therapy (VPT) and regenerative endodontic procedures, rely on dental tissue regeneration/repair mechanisms with the aid of biomaterials. These materials are applied in close contact to the pulpal tissue and are required to be biocompatible, form an antimicrobial seal, not induce staining, and be easy to manipulate. Historically, calcium hydroxide played an important role in VPT. However, over the last 3 decades, significant efforts in research and industry have been made to develop various biomaterials, including hydraulic tricalcium silicate cements. The present review summarized various hydraulic tricalcium silicate cements and their biological properties in clinical procedures, namely VPT and regenerative endodontic procedures.

Resinous adhesive systems differentially affect the expression of cytokines by human monocytes stimulated or not with Streptococcus mutans in vitro

OBJECTIVES

The polymerization of adhesive systems is incomplete and the residual monomers that have been released have a cytotoxic capacity. Some teeth develop into pulp necrosis after composite resin restorations. Considering frequent pulpal inflammation in response to cariogenic bacteria, substances released from the patches could affect the cells of the inflammatory infiltrate and interfere with the mechanisms of defense against microorganisms and protection of pulpal tissue. The aim of this study was to evaluate the effect of substances released by different resinous adhesive systems on cell viability and cytokine expression by human monocytes stimulated in vitro with Streptococcus mutans.

DESIGN

Peripheral blood mononuclear cells from 10 healthy subjects were stimulated with S. mutans and then incubated with supernatants obtained from the Single Bond Universal (SBU) or Clearfil SE Bond (CSEB) adhesive systems for eight hours. Staining with Annexin V and 7AAD for analysis of apoptosis were performed and detection of monocytes expressing cytokines IL-1α, IL-6, IL-8, IL-10, IL-12 and TNF-α were performed by flow cytometry.

RESULTS

No treatment significantly affected apoptosis in monocytes. SBU supernatant increased the frequency of monocytes expressing IL-8 and decreased the monocytes expressing IL-10. Considering S. mutans-stimulated cells, while SBU increased the frequency of IL-8⁺ monocytes, CSEB reduced the frequency of IL-6 and TNF-α positive monocytes.

CONCLUSIONS

Products released from SBU seem to induce proinflammatory effects on monocytes while those from CSEB show an anti-inflammatory outcome. These effects may interfere in the control of cytokine-mediated immunoinflammatory pulp reactions, both in the presence and absence of stimulation by cariogenic bacteria.

Three-dimensional tissue engineering-based Dentin/Pulp tissue analogue as advanced biocompatibility evaluation tool of dental restorative materials

OBJECTIVE

Two-dimensional (2D) in vitro models have been extensively utilized for cytotoxicity assessment of dental materials, but with certain limitations in terms of direct in vitro-in vivo extrapolation (IVIVE). Three-dimensional (3D) models seem more appropriate, recapitulating the structure of human tissues. This study established a 3D dentin/pulp analogue, as advanced cytotoxicity assessment tool of dental restorative materials (DentCytoTool).

METHODS

DentCytoTool comprised two compartments: the upper, representing the dentin component, with a layer of odontoblast-like cells expanded on microporous membrane of a cell culture insert and covered by a treated dentin matrix; and the lower, representing a pulp analogue, incorporating HUVEC/SCAP co-cultures into collagen I/fibrin hydrogels. Representative resinous monomers (HEMA: 1-8mM; TEGDMA: 0.5-5mM) and bacterial components (LPS: 1μg/ml) were applied into the construct. Cytotoxicity was assessed by MTT and LDH assays, live/dead staining and real-time PCR for odontogenesis- and angiogenesis-related markers.

RESULTS

DentCytoTool supported cell viability and promoted capillary-like network formation inside the pulp analogue. LPS induced expression of odontogenesis-related markers (RUNX2, ALP, DSPP) without compromising viability of the odontoblast-like cells, while co-treatment with LPS and resin monomers induced cytotoxic effects (live/dead staining, MTT and LDH assays) in cells of both upper and lower compartments and reduced expression angiogenesis-related markers (VEGF, VEGFR2, ANGPT-1, Tie-2, PECAM-1) in a concentration- and time- dependent manner. LPS treatment aggravated TEGDMA-induced and -in certain concentrations (2-4mM)- HEMA-induced cytotoxicity.

SIGNIFICANCE

DentCytoTool represents a promising tissue-engineering-based cytotoxicity assessment tool, providing more insight into the mechanistic aspects of interactions of dental materials to the dentin/pulp complex.

Management of deep caries and the exposed pulp

Caries prevalence remains high throughout the world, with the burden of disease increasingly affecting older and socially disadvantaged groups in Western cultures. If left untreated, caries will advance through dentine stimulating pulpitis and eventually pulp infection and necrosis; however, if conservatively managed, pulpal recovery occurs even in deep carious lesions. Traditionally, deep caries management was destructive with nonselective (complete) removal of all carious dentine; however, the promotion of minimally invasive biologically based treatment strategies has been advocated for selective (partial) caries removal and a reduced risk of pulp exposure. Selective caries removal strategies can be one-visit as indirect pulp treatment or two-visit using a stepwise approach. Management strategies for the treatment of the cariously exposed pulp are also shifting with avoidance of pulpectomy and the re-emergence of vital pulp treatment (VPT) techniques such as partial and complete pulpotomy. These changes stem from an improved understanding of the pulp-dentine complex's defensive and reparative response to irritation, with harnessing the release of bioactive dentine matrix components and careful handling of the damaged tissue considered critical. Notably, the development of new pulp capping materials such as mineral trioxide aggregate, which although not an ideal material, has resulted in more predictable treatments from both a histological and a clinical perspective. Unfortunately, the changes in management are only supported by relatively weak evidence with case series, cohort studies and preliminary studies containing low patient numbers forming the bulk of the evidence. As a result, critical questions related to the superiority of one caries removal technique over another, the best pulp capping biomaterial or whether pulp exposure is a negative prognostic factor remain unanswered. There is an urgent need to promote minimally invasive treatment strategies in Operative Dentistry and Endodontology; however, the development of accurate diagnostic tools, evidence-based management strategies and education in management of the exposed pulp are critical in the future.

Modifying Adhesive Materials to Improve the Longevity of Resinous Restorations

Dental caries is a common disease on a global scale. Resin composites are the most popular materials to restore caries by bonding to tooth tissues via adhesives. However, multiple factors, such as microleakage and recurrent caries, impair the durability of resinous restorations. Various innovative methods have been applied to develop adhesives with particular functions to tackle these problems, such as incorporating matrix metalloproteinase inhibitors, antibacterial or remineralizing agents into bonding systems, as well as improving the mechanical/chemical properties of adhesives, even combining these methods. This review will sum up the latest achievements in this field.

Durability of a low shrinkage TEGDMA/HEMA-free resin composite system in Class II restorations. A 6-year follow up

OBJECTIVE

The objective of this randomized controlled prospective trial was to evaluate the durability of a low shrinkage and TEGDMA/HEMA-free resin composite system in posterior restorations in a 6-year follow up.

METHODS

139 Class II restorations were placed in 67 patients with a mean age of 53 years (range 29-82). Each participant received at random two, as similar as possible, Class II restorations. In the first cavity of each pair the TEGDMA/HEMA-free resin composite system was placed with its 3-step etch-and-rinse adhesive (cmf-els). In the second cavity a 1-step HEMA-free self-etch adhesive was used (AdheSe One F). The restorations were evaluated using slightly modified USPHS criteria at baseline and then yearly during 6 years. Caries risk and parafunctional habits of the participants were estimated.

RESULTS

Three molar teeth showed mild post-operative sensitivity during 3 weeks for temperature changes and occlusal forces. After 6 years, 134 Class II restorations were evaluated. Twenty-one restorations, 8 cmf-els (11.4%) and 13 ASE-els (20%) failed during the 6 years (p<0.0001). The annual failure rates were 1.9% and 3.3%, respectively. The main reasons for failure were fracture followed by recurrent caries. Most fractures and all caries lesions were found in high risk participants.

SIGNIFICANCE

The Class II resin composite restorations performed with the new TEGDMA/HEMA-free low shrinkage resin composite system showed good durability over six years.

Balancing the risks and benefits associated with cosmetic dentistry - a joint statement by UK specialist dental societies

Cosmetic dentistry has become increasingly popular, largely as a result of social trends and increased media coverage. This understandable desire for the alleged 'perfect smile' needs to be tempered with an appropriate awareness of the significant risks associated with invasive cosmetic procedures such as veneers and crowns. Patients need to be properly informed that elective removal of healthy enamel and dentine can result in pulpal injury and poorer periodontal health in the longer term, particularly if they are young. The duty of candour means that they ought to be informed that aggressive reduction of sound tooth tissue is not biologically neutral and results in structural weakening of their teeth. Less invasive procedures such as bleaching on its own or for example, combined with direct resin composite bonding, can satisfy many patient's demands, while still being kinder to teeth and having much better fall-back positions for their future requirements. It is the opinion of the British Endodontic Society, British Society for Restorative Dentistry, Restorative Dentistry UK, Dental Trauma UK, British Society of Prosthodontics and the British Society of Paediatric Dentistry that elective invasive cosmetic dental treatments can result in great benefit to patients, but that some aggressive treatments used to achieve them can produce significant morbidities in teeth which were previously healthy. This is a worrying and growing problem with many ethical, legal and biologic aspects, but many adverse outcomes for patients who request cosmetic dental improvements are preventable by using biologically safer initial approaches to treatment planning and its provision.

Controversies in Endodontics

Diseases of the dental pulp often have an infectious origin, and treatments are aimed to control infections of the root canal system. Endodontic treatment principles originally evolved on the basis of trial and error, and only in recent decades have scientific methods been adopted to support clinical strategies. Yet, relevant research on the disease processes, their diagnoses, and efficient treatment are rare in the endodontic literature. Hence, the advancement of biologically based knowledge significant to clinical endodontics has been slow. Therefore, many differences of opinion still prevail in this field of dentistry. This review highlights and analyzes the background of some of the more heavily debated issues in recent years. Specifically, it deals with disagreements regarding the clinical management of pulpal exposures by caries in the adult dentition, definitions of success and failure of endodontic therapy, and causes of and measures to control infections of the root canal system. Clearly, a most apparent gap in the published endodontic literature is the lack of randomized clinical trials that address the more significant controversial matters relating to the management of pulpal wounds, medication, and the number of appointments required for the treatment of infected root canals. However, trials in endodontics require extremely long follow-up periods if valid conclusions are to be generated. Therefore, it is not to be expected that there will be rapid solutions to these issues in the foreseeable future.

Antibacterial activity of a modified unfilled resin containing a novel polymerizable quaternary ammonium salt MAE-HB

Resins with strong and long-lasting antibacterial properties are critical for the prevention of secondary dental caries. In this study, we evaluated the antibacterial effect and the underlying mechanism of action of an unfilled resin incorporating 2-methacryloxylethyl hexadecyl methyl ammonium bromide (MAE-HB) against Streptococcus mutans UA159 (S. mutans UA159). MAE-HB was added into unfilled resin at 10 mass%, and unfilled resin without MAE-HB served as the control. Bacterial growth was inhibited on 10%-MAE-HB unfilled resin compared with the control at 1 d, 7 d, 30 d, or 180 d (P < 0.05). The growth inhibitory effect was independent of the incubation time (P > 0.05). No significant differences in the antibacterial activities of eluents from control versus 10%-MAE-HB unfilled resins were observed at any time point (P > 0.05). The number of bacteria attached to 10%-MAE-HB unfilled resin was considerably lower than that to control. Fe-SEM and CLSM showed that 10%-MAE-HB unfilled resin disturbed the integrity of bacterial cells. Expression of the bacterial glucosyltransferases, gtfB and gtfC, was lower on 10%-MAE-HB unfilled resin compared to that on control (P < 0.05). These data indicate that incorporation of MAE-HB confers unfilled resin with strong and long-lasting antibacterial effects against S. mutans.

Novel Cavity Disinfectants Containing Quaternary Ammonium Monomer Dimethylaminododecyl Methacrylate

This study was set to assess the possible benefits of novel cavity disinfectants with 5% dimethylaminododecyl methacrylate (DMADDM); and compare the effectiveness of saliva microbial-aging method with water-aging in measuring the changing of resin-dentin bond strength. Three cavity disinfectants were tested: 0.2% Chlorhexidine (CHX); 5% DMADDM; and 5% DMADDM + 0.2% CHX. Microtensile bond strength (μTBS) test was performed after microbial-aging with saliva microbial or water aging for one month. Hydroxyproline (HYP), the production of collagen degradation, was measured spectrophotometrically. Additionally, the antibacterial effects of each reagent were evaluated. The 5% DMADDM exerted the least percentage of resin-dentin bond strength loss after one month microbial-aging (p < 0.05). There were no statistically significant differences of bond strength decrease after one month water aging among the tested groups (p > 0.05). Microbial-aging method yield more drop of bond strength than water aging in all groups except 5% DMADDM (p < 0.05). Meanwhile, 5% DMADDM had the same matrix metalloproteinases (MMPs) inhibitory effects as the other two agents (p > 0.05), but much stronger antibacterial capability than 0.2% CHX (p < 0.05). This indicated that a cavity disinfectant with 5% DMADDM is promising for improving the stability of resin-dentin bonds in appearance of saliva biofilm; and the saliva microbial-aging method is more promising for studying the durability of resin-dentin bonds than water aging.

Clinical evaluation of composite restorations in Er:YAG laser-prepared cavities re-wetting with chlorhexidine

OBJECTIVES

The objective of this study was to evaluate longitudinally the composite restorations, performed in cavities prepared by Er:YAG or conventional bur, and dentin re-wetting with water or chlorhexidine.

MATERIALS AND METHODS

Twenty individuals with four active caries with cavitation reaching the dentin located on the occlusal surface of molars counterparts are selected. The teeth of each individual were randomly assigned into four groups: (I) Er:YAG laser (260 mJ/4 Hz) re-wetting with chlorhexidine, (II) Er:YAG laser (260 mJ/4 Hz) re-wetting with deionized water, (III) conventional method re-wetting with chlorhexidine, and (IV) conventional method re-wetting with deionized water. The teeth were isolated, prepared cavities, phosphoric acid etching, and re-wetting according to previously assigned method. Restoration was performed employing the Single Bond 2 and Z350XT resin. Clinical follow-up was held after the polishing of the restoration (baseline) and 6 and 12 months of the making of the restoration using the modified USPHS criteria. The restorations were qualitatively analyzed by means of photographs. In the evaluation period, replicas of the restorations were analyzed by SEM. Data were analyzed by statistics using chi-square test (p < 0.05).

RESULTS

After 12 months of clinical evaluation, groups prepared with laser and re-wetting with chlorhexidine and water showed the lowest marginal staining value. There was no statistical difference between the groups for other factors. SEM analysis revealed that a non-expressive amount of restorations showed gaps and irregularities of tooth-restoration interface after 6 and 12 months compared to the baseline.

CONCLUSION

The restorations performed in laser-prepared cavities, regardless of the re-wetting, presented the best clinical performance over the evaluated period.

CLINICAL RELEVANCE

Laser-prepared teeth, regardless of re-wetting, showed greater resistance to marginal discoloration.

Different materials for direct pulp capping: systematic review and meta-analysis and trial sequential analysis

OBJECTIVES

We systematically assessed randomized controlled trials comparing direct pulp capping materials.

METHODS

Trials comparing materials for direct capping and evaluating clinically and/or radiographically determined success after minimum 3 months were included. Two reviewers independently screened electronic databases (Medline, Central, Embase) and performed hand searches. Risk of bias was assessed and meta-analyses were performed, separated for dentition. Trial sequential analysis was used to assess risk of random errors. Strength of evidence was graded using the GRADE approach.

RESULTS

From a total of 453 identified studies, 11 (all with high risk of bias) investigating 1094 teeth (922 patients) were included. Six studies were on primary teeth (all with carious exposures) and five on permanent teeth (carious and artificial exposures). Mean follow-up was 14 months (range 3-24). Most studies used calcium hydroxide as control, comparing it to mineral trioxide aggregate (MTA) (three studies), bonding without prior etching/conditioning (two), or bonding with prior etching/conditioning, enamel matrix proteins, resin-modified glass ionomer cement, calcium sulfate, zinc oxide eugenol, corticosteroids, antibiotics, or formocresol (each in only one study). One study compared MTA and calcium-enriched cement. In permanent teeth, risk of failure was significantly decreased if MTA instead of calcium hydroxide was used (risk ratio (RR) [95 % confidence intervals (CI)] 0.59 [0.39/0.90]); no difference was found for primary teeth. Other comparisons did not find significant differences or were supported by only one study. No firm evidence was reached according to trial sequential analysis.

CONCLUSION

There is insufficient data to recommend or refute the use of a specific material. More long-term practice-based studies with real-life exposures are required.

CLINICAL RELEVANCE

To reduce risk of failure, dentists might consider using MTA instead of calcium hydroxide (CH) for direct capping. Current evidence is insufficient for definitive recommendations.

Synthesis of dental matrix proteins and viability of odontoblast-like cells irradiated with blue LED

To evaluate the effect of irradiation with light-emitting diode (LED; 455 nm) on the viability and synthesis of dentin matrix proteins by odontoblast-like cells, MDPC-23 cells were cultivated (10(4) cells/cm(2)) in 24-well culture plates. After 12 h incubation in Dulbecco's modified Eagle's medium (DMEM), the cells were submitted to nutritional restriction by means of reducing the concentration of fetal bovine serum (FBS) for an additional 12 h. Cells were irradiated one single time with one of the following energy densities (EDs): 0.5, 2, 4, 10, or 15 J/cm(2) and irradiance fixed at 20 mW/cm(2). Non-irradiated cells served as control. After 72 h, cells were evaluated with regard to viability (methylthiazol tetrazolium technique (MTT)), mineralization nodule (MN) formation, total protein (TP) production, alkaline phosphatase activity (ALP), and collagen synthesis (Sircol), n = 8. The data were submitted to Kruskal-Wallis and Mann-Whitney tests (p > 0.05). There was no statistical difference between the viability of cells irradiated or not (control), for all the EDs. However, an increase in TP was observed for all the EDs when compared with the control group. A reduced ALP activity was seen in all irradiated groups, except for the ED of 0.5 J/cm(2), which did not differ from the control. There was no difference between the irradiated groups and control regarding collagen synthesis, with the exception of the ED of 10 J/cm(2), which inhibited this cell function. Significant reduction in MN occurred only for the EDs of 0.5 and 2 J/cm(2). The single irradiation with blue LED (455 nm), irradiance of 20 mW/cm(2), and energy densities ranging from 0.5 to 15 J/cm(2) exerted no effective biostimulatory capacity on odontoblast-like cells.

Mechanical Properties Comparing Composite Fiber Length to Amalgam

Photocure fiber-reinforced composites (FRCs) with varying chopped quartz-fiber lengths were incorporated into a dental photocure zirconia-silicate particulate-filled composite (PFC) for mechanical test comparisons with a popular commercial spherical-particle amalgam. FRC lengths included 0.5-mm, 1.0 mm, 2.0 mm, and 3.0 mm all at a constant 28.2 volume percent. Four-point fully articulated fixtures were used according to American Standards Test Methods with sample dimensions of 2×2×50 mm³ across a 40 mm span to provide sufficient Euler flexural bending and prevent top-load compressive shear error. Mechanical properties for flexural strength, modulus, yield strength, resilience, work of fracture, critical strain energy release, critical stress intensity factor, and strain were obtained for comparison. Fiber length subsequently correlated with increasing all mechanical properties, p < 1.1×10^-5. Although the modulus was significantly statistically higher for amalgam than all composites, all FRCs and even the PFC had higher values than amalgam for all other mechanical properties. Because amalgams provide increased longevity during clinical use compared to the standard PFCs, modulus would appear to be a mechanical property that might sufficiently reduce margin interlaminar shear stress and strain-related microcracking that could reduce failure rates. Also, since FRCs were tested with all mechanical properties that statistically significantly increased over the PFC, new avenues for future development could be provided toward surpassing amalgam in clinical longevity.

Material Tissue Interaction--From Toxicity to Tissue Regeneration

The topic of material tissue interaction has gained increasing interest over recent decades from both the dental profession and the public. The primary goal initially was to avoid adverse reactions after the application of dental materials. New laboratory test methods have been developed, and currently premarket testing programs, which attempt to guarantee a basic level of patient safety, are legally required worldwide. The dentist is responsible for selecting the correct indication as well as the proper handling of any newly emerging risk. Apart from this phenomenon-oriented "inert materials concept," the "analytical concept" focuses primarily on analyzing the reasons for adverse reactions, and identifying their associated modifying factors, in order to prevent them or to develop new and more biocompatible materials. The "concept of bioactivity" involves addressing the possibility of positively influencing tissue by materials application, such as the generation of tertiary dentin or antibacterial effects. Finally, tissue regeneration may be supported and promoted by the use of various suitable materials (matrices/scaffolds) into which stem cells can migrate or be seeded, leading to cell differentiation and the generation of new tissue. These new dental materials must also fulfill additional requirements such as controlled degradability in order to be suitable for clinical use. Clearly, the field of material tissue interaction is complex and comprises a wide range of issues. To be successful as dentists in the future, practitioners should remain informed of these important new developments and have the argumentative competence to both properly advise and treat their patients.

Role of matrix metalloproteinases in dental caries, pulp and periapical inflammation: An overview

Matrix metalloproteinases (MMPs) are a group of more than 25 secreted and membrane bound enzymes that represent class of enzymes responsible for degradation of pericellular substrates. They have been isolated from dentine, odontoblasts, pulp and periapical tissue. They play an important role in dentine matrix formation, modulating caries progression and secondary dentine formation. Earlier microbial proteolytic enzymes were believed to be responsible for degradation of dentine organic matrix, but lately the accumulated body of evidence suggests that MMPs have an important role in the process. During normal tissue modelling, differentiation during development, in modulating the cell behaviour, maintaining homeostasis and in numerous extracellular pathologic conditions, MMPs tends to be an equally important participant. Odontoblasts secrete some of the essential MMPs for both physiologic and pathologic conditions. MMPs also appear to be a participant in the process of reversible and irreversible pulpitis. Although they tend to have low expression and activity in adult tissues but at the onset of any destructive pathologic process, their production shoots up. They appear to have a significant presence during times of inflammation in the periapical region as well. We take a look at the various factors and evidence pointing towards the role of MMPs in the progression of caries, pulpal and periapical inflammation.

A 15-year randomized controlled study of a reduced shrinkage stress resin composite

OBJECTIVES

The aim of this randomized controlled study was to evaluate the long term effectiveness of a reduced shrinkage stress resin composite in Class II restorations. The material was compared intra-individually with a microhybrid resin composite.

MATERIALS AND METHODS

Each of 50 patients with at least one pair of two similar sized Class II cavities participated (22 female, 28 male, mean age 43 years, range 18-64). Each participant received in each pair, in a randomized way, one Class II restoration performed with a reduced shrinkage stress resin composite (InTen-S) and the other restoration with a microhybrid resin composite restoration (Point 4). Both restorations were placed with an etch-and-rinse bonding system and an oblique layering technique. A total of 106 restorations, 33 premolar and 73 molars, were placed. The restorations were evaluated blindly each year using modified USPHS criteria. The overall performance of the experimental restorations was tested after intra-individual comparison using the Friedmańs two-way analysis of variance test. The hypothesis was rejected at the 5% level.

RESULTS

At 15 years, 91 restorations were evaluated. The drop out frequency was 15 restorations (5 male, 3 female participants; 2 premolar and 13 molar restorations). Except for 2 participants, who reported slight symptoms during a few weeks after placement, no post-operative sensitivity was observed at the recalls. The overall success rate at 15 years was 77%. Twenty-one non acceptable restorations were observed during the 15 years follow up, 10 InTen-S (21.7%) and 11 Point 4 (24.4%) restorations (p>0.05). Annual failure rates for the resin composites were 1.5% and 1.6%, respectively. The main reasons for failure were secondary caries (8) and resin composite fracture (7). The differences between premolar vs. molar restorations and between restorations in male vs. female participants were not significant. Significant differences were observed between 2-surface vs. 3-surface restorations.

SIGNIFICANCE

During the 15-year follow up, the reduced shrinkage stress resin composite showed a good clinical durability in Class II cavities, but not significantly better than the control microhybrid resin composite. Secondary caries and material fracture were the main reasons of failure.

Periapical status of non-root-filled teeth with resin composite, amalgam, or full crown restorations: a cross-sectional study of a Swedish adult population

INTRODUCTION

Experimental studies show that dental pulp cells respond unfavorably to contact with resin composite restorative material. Hypothetically, in a random population, the frequency of apical periodontitis should be higher for teeth restored with resin composite than with amalgam. Therefore, the aim was to compare the periapical status of non-root-filled teeth restored with resin composite, amalgam, or laboratory-fabricated crowns in an adult Swedish population.

METHODS

The subjects comprised 440 individuals from a randomly selected sample of 1,000 adult residents of a Swedish county. The type, material, and quality of the restorations were recorded for all non-root-filled teeth by clinical examination and intraoral clinical photographs. Periapical status was evaluated on panoramic radiographs. The association between periapical status and type, material, and quality of the restorations was analyzed using the chi-square test and logistic regression analysis.

RESULTS

There was no significant difference in the frequency of apical periodontitis (AP) between teeth restored with resin composite or amalgam (1.3% and 1.1%, respectively). The frequency of AP for teeth restored with laboratory-fabricated crowns was significantly higher (6.3%). Regression analysis showed no association between AP and resin composite restorations but a significant association with laboratory-fabricated crowns.

CONCLUSIONS

The results indicate that the risk of damage to the pulp-dentin complex from exposure to resin composite material and dentin bonding agents shown in experimental studies is not reflected in the clinical setting. However, in the study sample, AP was diagnosed in a significantly higher proportion of teeth restored with laboratory-fabricated crowns.

Pulp response to dentine adhesives: A study on mature human pulps

Objective:

To clinically investigate the antibacterial effects of a commercially available self-etch 12-methacryloyloxy- dodecylpyridinium bromide (MDPB)-containing adhesive system in comparison with its respective non-MDPB-containing adhesive and to evaluate the pulp responses when in use on human teeth.

Materials and Methods:

Sixty-two viable human teeth scheduled for extraction were used. Class V cavities were prepared on the buccal surfaces of the teeth and filled with the tested materials (Protect Bond/Clearfil AP-X, SE Bond/Clearfil AP-X and Dycal/Ketac Fill Plus) as a control group, according to manufacturer's recommendations. Randomly divided to two groups teeth remained intra-orally for 4 and 8 weeks. After extraction, teeth were decalcified, sectioned and stained using the Mayer's hematoxylin and eosin, and modified Brown-Brenn's technique. Pulp responses were evaluated microscopically under a microscope and remaining dentine thickness measured under a stereomicroscope.

Results:

No statistically significant differences regarding pulp inflammation or bacterial infiltration were found either for the materials tested or for periods of post-operative evaluation.

Conclusions:

The results suggested that for a short period of evaluation there are no quantitative differences, regardless to restoring material used.

Inhibitory effects of a cured antibacterial bonding system on viability and metabolic activity of oral bacteria

OBJECTIVES

To evaluate the antimicrobial efficacy of Clearfil SE Protect (CP) and Clearfil SE Bond (CB) after curing and rinsed against five individual oral microorganisms as well as a mixture of bacterial culture prepared from the selected test organisms.

METHODS

Bacterial suspensions were prepared from single species of Streptococcus mutans, Streptococcus sobrinus, Streptococcus gordonii, Actinomyces viscosus and Lactobacillus lactis, as well as mixed bacterial suspensions from these organisms. Dentin bonding system discs (6 mm×2 mm) were prepared, cured, washed and placed on the bacterial suspension of single species or multispecies bacteria for 15, 30 and 60 min. MTT, Live/Dead bacterial viability (antibacterial effect), and XTT (metabolic activity) assays were used to test the two dentin system's antibacterial effect. All assays were done in triplicates and each experiment repeated at least three times. Data were submitted to ANOVA and Scheffe's f-test (5%).

RESULTS

Greater than 40% bacteria killing was seen within 15 min, and the killing progressed with increasing time of incubation with CP discs. However, a longer (60 min) period of incubation was required by CP to achieve similar antimicrobial effect against mixed bacterial suspension. CB had no significant effect on the viability or metabolic activity of the test microorganisms when compared to the control bacterial culture. CP was significantly effective in reducing the viability and metabolic activity of the test organisms.

SIGNIFICANCE

The results demonstrated the antimicrobial efficacy of CP both on single and multispecies bacterial culture. CP may be beneficial in reducing bacterial infections in cavity preparations in clinical dentistry.

Composite-induced toxicity in human gingival and pulp fibroblast cells

OBJECTIVE

The most important requirement for a material to be used in medical applications is its biocompatibility. Dental composite materials come into direct contact with oral tissues, especially gingival and pulpal cells. This study was performed to evaluate possible DNA damage in cells of human origin exposed to dental composites in vitro using a cytogenetic assay.

MATERIALS AND METHODS

Two composite resins (Vertise Flow, Kalore) were tested on human gingival and pulp fibroblasts using the acridine orange/ethidium bromide viability staining and alkaline comet assay. Cultures were treated with polymerized composites in two different concentrations (20 mg/ml, 40 mg/ml) for 14 days. Chi-square and Kruskall-Wallis non-parametric test were used for the statistical analysis (p < 0.05).

RESULTS

Significant cytotoxicity was observed for 40 mg/ml of Vertise Flow in both cultures, while Kalore (40 mg/ml) showed cytotoxic effect only on human pulp fibroblasts. A significant level of DNA damage was detected for both materials and concentrations, in both cell cultures.

CONCLUSION

If the two cell cultures are compared, the pulp cells were more sensitive to the cyto/genotoxic effects of dental composites. Based on the results, one can conclude that the use of tested materials may cause cellular damage in gingival and pulp fibroblasts in vitro.

Photocatalytic inactivation of biofilms on bioactive dental adhesives

Biofilms are the most prevalent mode of microbial life in nature and are 10-1000 times more resistant to antibiotics than planktonic bacteria. Persistent biofilm growth associated at the margin of a dental restoration often leads to secondary caries, which remains a challenge in restorative dentistry. In this work, we present the first in vitro evaluation of on-demand photocatalytic inactivation of biofilm on a novel dental adhesive containing TiO2 nanoparticles. Streptococcus mutans biofilm was cultured on this photocatalytic surface for 16 h before photocatalytic treatment with ultraviolet-A (UV-A) light. UV-A doses ranging from 3 to 43 J/cm(2) were applied to the surface and the resulting viability of biofilms was evaluated with a metabolic activity assay incorporating phenol red that provided a quantitative measure of the reduction in viability due to the photocatalytic treatments. We show that an UV-A irradiation dose of 8.4 J/cm(2) leads to one order of magnitude reduction in the number of biofilm bacteria on the surface of the dental adhesives while as much as 5-6 orders of magnitude reduction in the corresponding number can be achieved with a dose of 43 J/cm(2). This material maintains its functional properties as an adhesive in restorative dentistry while offering the possibility of a novel dental procedure in the treatment or prevention of bacterial infections via on-demand UV-A irradiation. Similar materials could be developed for the treatment of additional indications such as peri-implantits.

Pulpal and periradicular response to caries: current management and regenerative options

The pulp-dentin complex is a strategic and dynamic barrier to various insults that plague the dentition. Researchers have yet to understand the complete potential of this shifting junction and its components. The most common cause of injury to the pulp-dentin complex is carious breakdown of enamel and dentin. In recent years, there has been a change in restorative management of caries. The emphasis is on strategies to preserve dentin and protect the pulp. This article provides a brief review of the effect of caries on the pulp, of subsequent events on the periradicular tissues, and of current understanding of treatment modalities.

Future dentistry: cell therapy meets tooth and periodontal repair and regeneration

Cell-based tissue repair of the tooth and – tooth-supporting – periodontal ligament (PDL) is a new attractive approach that complements traditional restorative or surgical techniques for replacement of injured or pathologically damaged tissues. In such therapeutic approaches, stem cells and/or progenitor cells are manipulated in vitro and administered to patients as living and dynamic biological agents. In this review, we discuss the clonogenic potential of human dental and periodontal tissues such as the dental pulp and the PDL and their potential for tooth and periodontal repair and/or regeneration. We propose novel therapeutic approaches using stem cells or progenitor cells, which are targeted to regenerate the lost dental or periodontal tissue.

Antibacterial activity of a triclosan-containing resin composite matrix against three common oral bacteria

This study investigated the antibacterial effect of a resin composite matrix with or without incorporated triclosan (0.3 wt%) on Streptococcus mutans, Actinomyces viscosus and Lactobacillus casei. In the quantitative assay, bacterial suspensions were filled into 20-μl cavities within temporary restorative resins. After 0, 4, 8, 12, 24 and 48 h of incubation, the suspensions were removed from the restoratives and the numbers of viable bacteria were determined. Bacterial suspensions incubated without restoratives served as the controls. Ten replicates were carried out for each experiment. The resin composite containing triclosan demonstrated variable degrees of antibacterial activity against the microorganisms, revealing a significant inhibitory effect on S. mutans within 12 h compared to the control. The viable counts of A. viscosus significantly decreased after 24 h. A significant reduction of L. casei was observed after 48 h. The unloaded resin composite did not reveal a marked antibacterial effect. The resin composite loaded with triclosan might be beneficial in preventing cavity contamination and minimizing the risk of pulpal irritation in the short-term.

Proliferation of rat molar pulp cells after direct pulp capping with dentine adhesive and calcium hydroxide

The aim was to evaluate the proliferation of pulp cells 1, 3 and 7 days after direct pulp capping with the dentine adhesive Gluma Comfort Bond (GCB) and to compare it with calcium hydroxide (Ca(OH)(2)). An occlusal cavity was prepared in 72 molar teeth of 36 Wistar rats. Then GCB or Ca(OH)(2) was placed on the exposed pulp. All cavities were restored with composite. After 1, 3 and 7 days, the animals were sacrificed. One hour prior sacrification, 5-bromo-2'-desoxyuridine (BrdU) was injected into the intraperitoneal cavity for immunohistological analysis of 18 animals. BrdU was incorporated into the DNA to tag proliferating cells using an antibody staining. Three animals served as controls and were not further treated. The number of the tagged cells was statistically analysed by comparing the results of the three groups. In 18 rats, routine histological analysis was performed in order to evaluate the pulp tissue for bacterial infection, inflammatory cells and necrosis. The marked cells were identified as fibroblasts, endothelial cells (after 1, 3 and 7 days) and Höhl cells (after 7 days). One day after capping, significantly more cells were stained in the GCB than in the Ca(OH)(2) group (p < 0.05). After 3 days, significantly more cells were stained in the GCB than in the Ca(OH)(2) and the control group (p < 0.016). Direct contact of GCB with pulp tissue leads to an increased formation of granulation tissue (fibroblasts, endothelial cells) because of an inflammatory reaction. This may be explained by missing antibacterial effect and foreign body reactions. Also, GCB may have a negative effect on Höhl cells.

Durability of resin composite restorations in high C-factor cavities: a 12-year follow-up

OBJECTIVE

Polymerization shrinkage and shrinkage stress has been considered as one of the main disadvantages of resin composite restorations. Cavities with high C-factors increase the risk for interfacial failures. Several restorative techniques have been suggested to decrease the shrinkage stress. The purpose of this study was to evaluate the durability of techniques as oblique layering, indirect curing and/or a laminate with a poly-acid modified resin composite in direct Class I resin composite restorations in a 12-year follow-up.

METHODS

Each of 29 patients received one or two pair(s) rather extensive Class I restorations. The first restoration was a poly-acid modified resin composite/resin composite sandwich restoration and the second a direct resin composite restoration. Both restorations, except for the laminate layer, were placed with oblique layering and two-step curing technique. 90 restorations were evaluated annually with slightly modified USPHS criteria during 12 years.

RESULTS

At 12 years, 38 pairs were evaluated. Two cases of slight post-operative sensitivity were observed in one patient. A cumulative failure rate of 2.4% was observed for both the resin composite and the laminate restorations. One laminate restoration showed non-acceptable color match, but was not replaced and one resin composite restoration showed a chip fracture. Five restorations were replaced due to primary proximal caries.

CONCLUSIONS

The high failure rate expected in the high C-factor Class I cavity, associated with polymerization shrinkage and shrinkage stress, were not observed. The techniques used resulted in an excellent durability for the Class I resin composite restorations.

Reparative dentinogenesis induced by mineral trioxide aggregate: a review from the biological and physicochemical points of view

This paper aims to review the biological and physicochemical properties of mineral trioxide aggregate (MTA) with respect to its ability to induce reparative dentinogenesis, which involves complex cellular and molecular events leading to hard-tissue repair by newly differentiated odontoblast-like cells. Compared with that of calcium hydroxide-based materials, MTA is more efficient at inducing reparative dentinogenesis in vivo. The available literature suggests that the action of MTA is attributable to the natural wound healing process of exposed pulps, although MTA can stimulate hard-tissue-forming cells to induce matrix formation and mineralization in vitro. Physicochemical analyses have revealed that MTA not only acts as a "calcium hydroxide-releasing" material, but also interacts with phosphate-containing fluids to form apatite precipitates. MTA also shows better sealing ability and structural stability, but less potent antimicrobial activity compared with that of calcium hydroxide. The clinical outcome of direct pulp capping and pulpotomy with MTA appears quite favorable, although the number of controled prospective studies is still limited. Attempts are being conducted to improve the properties of MTA by the addition of setting accelerators and the development of new calcium silicate-based materials.