High-Fidelity Anthropometric Facial Measurements Can Be Obtained From a Single Stereophotograph From the Vectra H1 3-Dimensional Camera

Current status of optical scanning in facial prosthetics: A systematic review and meta-analysis

Purpose To assess the accuracy of scanning technologies for constructing facial prostheses on human faces.Study selection Our systematic search was performed on five databases. Studies reporting on human volunteers (P) whose faces were scanned with a scanning technology were eligible. The anthropometrical interlandmark distances (ILDs) were used as indicators of accuracy; the ILDs are measured on the virtual models (I) and directly on the faces (C). The virtual models deviated from their true values (O). Studies reporting the measurements on patients with or without facial deformities were included, but cadavers or inanimate objects were reasons for exclusion. We performed a mean difference (MD) / standardized MD analysis with a random effect model. The difficulties regarding the scanning procedure mentioned in the articles were also assessed.Results We found 3723 records after duplicate removal. Twenty five articles were eligible for the qualitative review, and ten articles were included in the quantitative synthesis. Eight different ILDs were compared in MD analyses. The differences were between -0.54-0.43 mm. We also performed a regional three-dimensional analysis to compare scanning technologies in each major region. No significant differences were found in any of the regions and axes. The most mentioned difficulties were artifacts due to motion or blinking.Conclusions The results suggest no systematic skew in linear dimensions neither between direct caliper measurements nor between measurements on the scanned models, scanning technologies, or facial regions.

Acquisition of Precision and Reliability of Modalities for Facial Reconstruction and Aesthetic Surgery: A Systematic Review

The foundation of reconstructive and cosmetic surgery is a confluence of advanced technologies, plethora of procedures, inventive modifications, and planned strategies. In surgical planning, the most crucial steps for treating a patient are evaluating the facial morphometry and recognizing the deviations from the baseline values of facial parameters. Various imaging and non-imaging modalities and sub-modalities contribute to diagnosis, treatment planning, and follow-up care. These techniques are an important milestone of pre-, peri-, and postoperative care in facial reconstruction. The current research aims to comprehensively explain imaging and non-imaging technologies encompassing both innovative and traditional approaches in facial reconstruction. PubMed, Scopus, and Web of Science were searched from 1990 to 2022, and systematic review was conducted in accordance with the PRISMA recommendations. Undoubtedly, various factors impact the selection of facial analysis acquisition approaches and their prospective. The surgical team must understand such modalities' potential for diagnosis and treatment. The evolution of three-dimensional imaging has been fueled because of the need for devices with high speed, small size, and several functions. Automation with more efficiency and precision is the way of the future for three-dimensional imaging. Stereophotogrammetry can clearly quantify the field of facial analysis. All the publications under consideration came to the same conclusion: Canfield's Vectra three-dimensional imaging devices can provide accurate, repeatable stereophotogrammetric pictures. Although a few minor mistakes were recorded, most examined devices are deemed reliable and accurate tools for Plastic surgeons.

Vectra 3D Simulation in Lower Eyelid Blepharoplasty: How Accurate is it?

BACKGROUND

Estimating the volume of fat to be resected during lower lid blepharoplasty can be challenging. While the excess fat is clearly visible in the upright position, it retracts into the orbital cavity when the patient is in decubitus. Several tools have been developed to predict the volume required for adequate outcomes and to reduce the risk of complications. Among these, 3D photography, in addition to being noninvasive, radiation-free, portable and relatively inexpensive, can be used to make simulations.

OBJECTIVE

To assess the level of agreement between Vectra H1 camera simulations and the outcome of lower eyelid blepharoplasties with volume removal based on these simulations.

METHODS

Preoperatively, a 3D camera and simulation software (Vectra H1, Canfield Imaging Systems) was used to estimate the fat pad volume to be resected from the lower eyelids in a sample of 35 patients (female n = 34) aged 55 years on average. Following the procedure, the patients were photographed at 1, 3 and 6 months and the outcome was compared to the simulation.

RESULTS

The agreement between the simulated volume and the intraoperative volume was high. While the difference between the postoperative volume and the simulated volume decreased over time, at 6 months the actual volume was still 0.30 mL (right eye) and 0.24 mL (left eye) larger than the simulated volume.

CONCLUSIONS

A systematic and significant difference was found between the simulation volume and the postoperative volume. The low level of agreement observed suggests that the accuracy of the tested software is insufficient for reliable simulations.

LEVEL OF EVIDENCE IV

This journal requires that authors assign a level of evidence to each article. For a full description of these evidence-based medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Mini-microform cleft lip with complete cleft alveolus and palate: A case report

Cleft lip and cleft alveolus are caused by incomplete fusion of the frontonasal and maxillary prominences. However, milder forms of cleft lip are rarely accompanied by cleft alveolus. Here, we report a rare case of mini-microform cleft lip with complete cleft alveolus and cleft palate. No findings suggestive of cleft lip were evident on initial examination. However, three-dimensional facial measurements confirmed the presence of cleft lip despite no evidence of orbicularis oris muscle (OOM) rupture on ultrasonography. Collapsed nostril, as observed in this case, is usually associated with OOM rupture. However, it can also be caused by skeletal abnormalities, such as cleft alveolus. Three-dimensional facial measurements and ultrasonography can assist in accurate diagnosis when visual examination is ambiguous.

Determination of Ethnic Variation in Infant Nasolabial Anthropometry Using 3D Photographs: Implications for Bilateral Cleft Lip Nasal Correction

OBJECTIVE

We aimed to assess significant ethnic variabilities in infants' nasolabial anthropometry to motivate variations in surgical correction of a synchronous bilateral cleft lip/nasal anomaly, specifically whether a long columella is a European feature, therefore accepting a short columella and/or delayed columellar lengthening suitable for reconstruction in ethnic patients.

METHODS

Thirty-three infants without craniofacial pathology (10 African American [AA], 7 Hispanic [H], and 16 of European descent [C]), ages 3 to 8 months, presenting to the Johns Hopkins All Children's general pediatric clinic were recruited. Four separate 3D photographs (2 submental and frontal views each) were taken using the Vectra H1 handheld camera (Canfield Imaging). Eighteen linear facial distances were measured using Mirror 3D analysis (Canfield Imaging Systems). Difference between ethnicities was measured using analysis of variance with the Bonferroni/Dunn post hoc comparisons. Pearson correlation was employed for interrater reliability. All statistical analyses were carried out using SPSS version 21.0 (IBM Corp), with statistical significance set at P < .05.

RESULTS

Nasal projection (sn-prn) and columella length (sn-c) did not differ significantly between groups (P = .9). Significant differences were seen between ethnic groups in nasal width (sbal-sbal [C-AA; P = .02]; ac-ac [C-AA; P = .00; H-AA; P = .04]; al-al [C-AA; P = .00; H-AA; P = .001]) and labial length (sn-ls [C-AA; P = .041]; sn-sto [C-AA; P = .005]; Cphs-Cphi L [C-AA; P = .013]; Cphs-Cphi R [C-AA; P = .015]). Interrater reliability was good to excellent and significantly correlated for all measures.

CONCLUSIONS

African American infants exhibited wider noses and longer lips. No difference was noted in nasal projection or columella length, indicating that these structures should be corrected during the primary cleft lip and nasal repair for all patients and should not be deferred to secondary correction.

Morphological Correlations in Nasolabial Formation After Primary Lip Repair for Unilateral Cleft Lip

PURPOSE

We aim to reveal postoperative morphological correlations between the nasolabial components in patients with unilateral cleft lip (UCL). The hypothetical correlations are first, a correlation between the vertical height of the cleft-side alar base and the length of the cleft-side red lip, and second, a correlation between the length of the cleft-side red lip and the vertical position of the cleft-side oral commissure. We explain how these morphological balances are controlled by surgery.

METHODS

Three-dimensional bilateral measurements of the length of the red lip, vertical height of the nasal alar base, and vertical height of the oral commissure were conducted retrospectively on 31 patients with UCL and palate (complete UCL: 26; incomplete UCL: 5) who underwent primary lip plasty at Osaka Women's and Children's Hospital from 2017 to 2019.

RESULTS

We found a statistically significant correlation between the vertical height of the cleft-side alar base and cleft-side red lip length (P = .012, r = 0.45); thus, the longer the red lip, the lower was the nasal alar base. The correlation between the cleft-side red lip length and the vertical height of the cleft-side oral commissure also showed a statistical significance (P = .00074, r = 0.57); thus, the shorter the red lip, the higher was the oral commissure.

CONCLUSIONS

The present results provided objective evidence showing basic morphological relationships between the postoperative nasolabial features of patients with UCL. The results lead to a reasonable approach to define the proposed peak of the Cupid's bow, an unsettled major controversy in cleft lip surgery.

Updating Standards of Facial Growth in Romanian Children and Adolescents Using the Anthropometric Method-A Pilot Study

The anthropometric method is an important tri-dimensional and non-invasive assessment instrument for accurate diagnosis in paedodontics, orthodontics, and other medical fields. Our aim was to propose a technique that is accessible for clinicians and to determine the reference values for Romanian children and adolescents for the facial parameters selected. We proposed three basic instruments: a plastic compass, a ruler, and a digital caliper. Eighty-five children and adolescents (62% girls and 38% boys), aged between 3.5 and 14.5 years, were included in the study. We selected eight transversal, 12 vertical, and three sagittal measurements. Facial indices, according to Farkas L.G., were directly determined. The correlations between facial and general growth parameters, using Pearson correlation coefficient, for the entire sample were significant, direct, and strong for the following: Zy-Zy, Go-Go, N-Gn, N-Sn, Sto-Gn, Tr-Gn, Tr-Sn, Tr-Tr (r = 0.526–0.925, p < 0.001), and insignificant for Sn-Sto (r = 0.099–0.124, p > 0.354). The highest correlation coefficient is exhibited by Tr-Gn (r = 0.893 with height and r = 0.925 with weight). When performing a gender related comparison, we noticed that the vertical and transversal linear parameters and some facial indices are increased in boys (p < 0.05), depending on the age group. The simplified anthropometric technique represents an accessible method to every clinician, bringing important information related to dentofacial growth, diagnosis, and treatment planning in dentistry.

Degree of Asymmetry Between Patients With Complete and Incomplete Cleft Lips

INTRODUCTION

Surgical outcomes for patients with complete cleft lips are not as ideal as those achieved for milder phenotypes. We hypothesized that in addition to the greater width of the cleft, patients with complete cleft lip and palate exhibit a greater degree of hypoplasia and asymmetry.

METHODS

Stereophotographs of 14 infants with unrepaired unilateral complete and 14 with incomplete cleft lips were measured using Vectra imaging software (Canfield Imaging). Unpaired t tests were used to compare measured asymmetry between groups. Measurements included nasion to endocathion, sn-sbal, subnasale to alare (sn-al), subnasale to crista philtra, subalare to crista philtra (sbal-cphi), chelion to crista philtra, lateral lip element fullness, medial lip element fullness (mef), and non-cleft lip fullness. Duplicate measurements allowed Pearson correlation to be used to determine intra-rater reliability. Statistical significance was set at P < .05.

RESULTS

Degree of asymmetry of the nasal base, sn-al, and sn-sbal was significantly greater for patients with complete clefts (P = .0001, P = .0001). Hypoplasia of the lateral lip element was seen when comparing lateral and mef (P = .04, P = .004) and lateral lip height (sbal-cphi''; P = .002). The degree of cupid's bow asymmetry did not differ between groups (P = .23). Intrarater reliability was high for all facial measures, ranging from 0.70 to 0.99.

CONCLUSIONS

More severe, complete cleft lips demonstrate statistically significant greater asymmetry in surgically relevant dimensions. There was greater width of the nasal base. Vertical asymmetry of cupid's bow was unaffected by cleft severity, but that asymmetry was greater in patients with complete clefts due to hypoplasia of the lateral lip element. This may contribute to the less favorable results in these patients.