Does femoral morphology and stem alignment influence outcomes of cementless total hip arthroplasty with proximally coated double-tapered titanium stems?

Influence of bone mineral density on femoral stem subsidence after cementless THA

INTRODUCTION

Femoral stem subsidence can lead to aseptic loosening after total hip arthroplasty (THA). Low bone mineral density (BMD) is a risk factor for stem subsidence as it can affect the initial stability and osteointegration. We evaluated whether reduced bone mineral density is related to higher subsidence of the femoral stem after primary cementless THA with enhanced recovery rehabilitation.

METHODS

79 patients who had undergone primary cementless THA with enhanced recovery rehabilitation were analyzed retrospectively. Subsidence of the femoral stem was measured on standing pelvic anterior-posterior radiographs after 4-6 weeks and one year. Patient individual risk factors for stem subsidence (stem size, canal flare index, canal fill ratio, body mass index (BMI), demographic data) were correlated. Dual X-ray absorptiometry (DXA) scans were performed of the formal neck and the lumbar spine including the calculation of T-score and Z-score. Patient-reported outcome measures were evaluated 12 months postoperatively.

RESULTS

Stem subsidence appeared regardless of BMD (overall collective 2.3 ± 1.64 mm). Measure of subsidence was even higher in patients with normal BMD (2.8 ± 1.7 mm vs. 2.0 ± 1.5 mm, p = 0.05). High BMI was correlated with increased stem subsidence (p = 0.015). Subsidence had no impact on improvement of patient-related outcome measures (WOMAC, EQ-5D-5L and EQ-VAS) after THA. Patients with low BMD reported lower quality of life 12 month postoperatively compared to patients with normal BMD (EQ-5D-5L 0.82 vs. 0.91, p = 0.03).

CONCLUSION

Stable fixation of a cementless stem succeeds also in patients with reduced BMD. Regarding stem subsidence, enhanced recovery rehabilitation can be safely applied in patients with low BMD.

Can Selected Use of Cemented and Uncemented Femoral Components in a Broad Population Produce Comparable Results Following Primary Total Hip Arthroplasty for Osteoarthritis?

BACKGROUND

Registry data have demonstrated lower rates of revision and periprosthetic fracture in select cohorts with cemented femoral fixation at primary total hip arthroplasty. Whether this is true of all component designs is not known. We hypothesized that selected use of ream-and-broach triple-tapered uncemented stem designs may provide comparable results to cemented stems.

METHODS

From 2000 to 2018, 5,809 primary total hip arthroplasties were performed with either a cemented (1,304) or ream-and-broach triple-tapered uncemented stem (4,505). Implant choice was at surgeon discretion. The cemented group was older, more often women, and had slightly lower body mass index. A subgroup analysis was performed on patients ≥75 years of age. Statistical weighting accounted for baseline cohort differences.

RESULTS

At 10 years, there was a trend toward higher all-cause revision (hazards ratio (HR) 1.6, P = .053) and higher all-cause reoperation (HR 1.6, P = .02) in the cemented fixation cohort. The cemented fixation group had fewer intraoperative periprosthetic fractures (HR 0.21, P < .001) but no difference in postoperative fractures (HR 0.99, P = .96). The same was true in patients ≥75 years. In the ≥75-years subgroup, there was no difference in revision or reoperation at 10 years.

CONCLUSION

Compared to cemented stems, the use of ream-and-broach triple-tapered uncemented stems in select patients, including those ≥75 years, was associated with more intraoperative fractures but no difference in 10-year implant survivorship. These findings are different than some registry data and suggest that specific uncemented components, implanted in selected patients by experienced surgeons, can perform as well as cemented implants in a broad patient population.

The anatomical shape of the proximal femur correlates with the distal femur anatomy

PURPOSE

In the case of stemmed implants for lower limb joint arthroplasty procedures, implant stability and survivorship generally rely on the strength of fixation in the medullary canal regardless of whether the procedure is primary or revision surgery. This study aimed to investigate the relationship between the proximal (Dorr classification) and distal (Citak classification) femoral canal geometry classification systems.

METHODS

A total of 200 patients who received standing long leg radiographs (hip to ankle) at our institution were identified using our institutional electronic radiology database. Patients were recruited into 4 groups. There were 100 male and 100 female patients with each of those being split into 50 right-sided and 50 left-sided long-leg standing anteroposterior (AP) radiographs. Two independent, blinded observers reviewed each radiograph on two separate occasions, with a minimum of a one-week interval between sittings to review each respective radiograph.

RESULTS

No statistically significant correlation was found between demographic data and clinical measurements. A statistically significant correlation was found between the patient's age and BMI results and Citak and Dorr measurements. There was excellent inter-observer and intra-observer agreement for the Citak and Dorr Classifications. The mean Cronbach's α coefficient was 0.96 (range 0.93-0.98) for the Citak Classification and 0.95 (range 0.83-0.97) for the Dorr Classification. There was also an excellent intra-observer agreement with 95% average pairwise per cent agreement for the Citak Classification and 95% average pairwise per cent agreement for the Dorr classification. A statistically significant positive correlation was found between Dorr Calcar Isthmus and Citak Ratio (p < 0.05).

CONCLUSION

In this study, the Dorr and Citak classifications are put into relation to each other for the first time. The morphology of the femur was investigated in its entirety and it was shown that there was a positive correlation between the anatomical shape of the proximal and distal medullary canals.

The influence of stem alignment on the bone mineral density around the Polarstem following total hip arthroplasty

INTRODUCTION

Bone mineral density is important in detecting implant loosening after total hip arthroplasty. The Polarstem can improve postoperative bone mineral density changes, but no information exists on the influence of postoperative stem alignment. Therefore, we investigated the relationship between bone mineral density change and stem alignment following total hip arthroplasty using a cementless Polarstem.

MATERIALS AND METHODS

This retrospective study included 42 patients (50 hips) who underwent total hip arthroplasty using a cementless Polarstem. Bone mineral density around the stem was measured according to the established Gruen zone classification using dual-energy X-ray absorptiometry. Measurements were performed 2 months postoperatively (baseline) and 6, 12, 18, and 24 months postoperatively. Bone mineral density changes at each follow-up were calculated as (bone mineral density at follow-up/at 2 weeks) × 100 (%). The stem varus, anterior tilt, and anteversion angles were measured using computed tomography. The correlation coefficient between bone mineral density changes and stem alignment were investigated.

RESULTS

The 24-month postoperative bone mineral density increased in zones 4 (106.0%) and 5 (107.3%) and decreased in zones 1 (89.6%) and 7 (90.6%). The mean stem varus angle, anterior tilt, and anteversion error were - 0.3° ± 1.8°, 1.9° ± 2.2°, and 6.8° ± 5.4°. Negative correlations were observed between the stem varus angle and 24-month postoperative bone mineral density change in zone 1 (r = - 0.34, p = 0.02), and the stem anteversion error and 24-month postoperative bone mineral density change in zone 1 (r = - 0.48, p < 0.01) and zone 7 (r = - 0.31, p = 0.03).

CONCLUSIONS

The cementless Polarstem may have a positive effect on postoperative bone mineral density in the distal femur. However, varus malalignment and anteversion error of the stem could have a negative influence on the bone mineral density changes in the proximal femur.

Cementless femoral stem fixation and leg-length discrepancy after total hip arthroplasty in different proximal femoral morphological types

PURPOSE

Leg-length changes at total hip arthroplasty (THA) may result from too proximal position of the femoral component, i.e. not being sunk deep enough into the femoral canal due to the size and shape of both medullary canal and implant. Some femoral implants are designed to achieve such fixation in the mediolateral dimension, while others also engage the bone anteroposteriorly. Our aim was to examine the relationship between proximal femoral morphology, osseointegration and leg-length equalization at THA. We asked whether the Dorr classification, femoral cortical index and canal flare index on preoperative radiographs had significant impact on THA aseptic loosening rates and post-operative leg-length discrepancy (LLD).

METHODS

Literature review included original articles on proximal femoral morphology with post-operative LLD and other clinical outcomes of THA, published in the last decade. Case reports and biomechanical studies without clinical data were excluded.

RESULTS

Higher femoral cortical index and/or canal flare index (corresponding to the Dorr type A) increases the risk of leg lengthening at THA. This is particularly notable in femoral stems with metaphyseal fixation, where high canal flare index has also been linked to osseointegration failure and implant loosening. On the other hand, lower canal flare index (corresponding to the Dorr type C) is more prevalent in the elderly population and increases late periprosthetic fracture rates and stress shielding. Even the most commonly used cementless femoral stems cannot offer optimal fit to intra-/extramedullary geometry or offset restoration in up to 30% of clinical cases.

CONCLUSIONS

Femoral morphology can have significant impact on post-operative LLD and osseointegration of cementless THA. Quantitative measurements of the proximal femoral canal may improve the choice of a particular implant and fixation method.