Predictability of rotational tooth movement with orthodontic aligners comparing software-based and achieved data: A systematic review and meta-analysis of observational studies

Effect of post-printing curing time on cytotoxicity of direct printed aligners: A pilot study

INTRODUCTION

The aim of this in vitro study was to examine the potential impact of different curing times of 3D-printed orthodontic aligners on their cytotoxicity.

METHOD

Some 60 samples of aligner material were directly 3D printed using Tera Harz TC-85 DAC resin and randomly allocated to three different curing time groups (14, 24 and 50 min). Zendura FLX samples were used as control. The samples were incubated in saliva for 14 days, and then the supernatant was collected. Human gingival fibroblasts (HGF-1)-CRL2014 were used to evaluate potential cytotoxicity. Furthermore, HGF-1 cells were plated on the samples as well as on a glass control sample. After 72 h of growth, their viability was tested.

RESULTS

Compared with the glass, only the 50-min curing time markedly reduced fibroblast cell growth. Additionally, a negative linear trend was observed between curing time and fibroblast growth. In comparison with the aligner control group, all samples, including the aligner control samples, exhibited a significant reduction in the viability of human fibroblasts when exposed to saliva.

CONCLUSIONS

3D directly printed aligners showed a cytotoxic effect similar to that of thermoformed conventional aligners in terms of fibroblasts growth. A linear trend was found between curing time and cells growth, indicating that directly printed aligners could exhibit higher cytotoxicity if exposed to a longer curing time. This dependence on curing time underscores the importance of following a strict manufacturing process.

Accuracy of clear aligners in the orthodontic rotational movement using different attachment configurations

OBJECTIVE

To evaluate the accuracy of dental rotational movements using clear aligners with different attachment configurations.

MATERIALS AND METHODS

This retrospective study analysed 212 teeth from 89 patients undergoing Invisalign treatment. Digital models were analysed after the virtual treatment plan (ST1) and after the first treatment phase (ET1) to evaluate the effective clinical rotational movement. The rotational movements of incisors, canines, and bicuspids were measured using data from the Clincheck Movements Table. ST1 and ET1 were compared to determine the actual rotational movement achieved (ST1-ET1). The presence or absence of attachments (rectangular or optimized) on teeth was analysed. The accuracy of rotational movements among attachment types was compared using the Kruskal-Wallis test. Multiple linear regressions were conducted with accuracy as the dependent variable and tooth type, gender, and age as predictors.

RESULTS

Optimized attachments had the highest median accuracy (70%), followed by rectangular (65%), and without attachment (63%), with no significant differences (p = .5). There were no significant differences across age groups, genders, or tooth types. Baseline accuracy was 68.62% (95% CI: 56.03-81.20, p < .001). Age was a significant predictor (estimate = -0.30, 95% CI: -0.58 - -0.03, p = .032), indicating decreased accuracy with increasing age. The model's R2 was 0.046, with an adjusted R2 of 0.003, indicating minimal variance explained.

CONCLUSION

The addition of attachment configurations to clear aligners improves rotational accuracy, but not significantly. Further advancements in these configurations are needed to enhance the performance of the aligners.

Attachment Wear in Different Clear Aligner Therapy: A Comparative Study

Background

Because of its ease and visual attractiveness, clear aligner therapy has grown in popularity as an orthodontic treatment option. On the other hand, the results of therapy may be impacted by attachment wear. Comparing attachment wear in three distinct clear aligner systems-System A, System B, and System C-was the goal of this investigation.

Methods

The research comprised 60 individuals receiving clear aligners as part of their orthodontic treatment. Depending on whatever clear aligner system was being utilised, the patients were split into three groups. Attachment wear was evaluated using a standardised scoring method regularly. The various systems' attachment wear was compared using statistical analysis.

Results

Compared to Systems B and C, System A showed less attachment wear. There were notable variations in attachment wear ratings between the systems. System C's attachments had the most wear, whereas System A's attachments had the least.

Conclusion

Different clear aligner systems showed varying degrees of attachment wear, with System A exhibiting the least amount of wear. To maximise treatment procedures and guarantee treatment efficacy and longevity in clear aligner therapy, it is vital to comprehend attachment wear patterns.

Predictability of tooth rotations in patients treated with clear aligners

Clear aligners are employed daily for the treatment of several malocclusions. Previous clinical studies indicated low accuracy for the correction of tooth rotations. The aim of this study was to evaluate the predictability of tooth rotations with clear aligners. The sample comprised 390 teeth (190 mandibular; 200 maxillary), measured from the virtual models of 45 participants (21 men, 24 women; mean age: 29.2 ± 6.6 years old). For each patient, pre-treatment (T0) digital dental models (STL files), virtual plan (T1) and post-treatment digital dental models (T2) of both the mandibular and maxillary arches were imported onto Geomagic Control X, a 3D metrology software which allows angular measurements. Rotations were calculated by defining reproducible vectors for all teeth in each STL file and superimposing both T0 with T1 to determine the prescribed rotation, and T0 with T2 to determine the achieved rotation. Prescribed and achieved rotations were compared to assess movement's accuracy. The Wilcoxon signed-rank test and paired t-test were used to assess differences between the prescribed and achieved movements (P < 0.05). The overall predictability of rotational movement was 78.6% for the mandibular arch and 75.0% for the maxillary arch. Second molar accuracy was the lowest in both arches. Clear aligners were not able to achieve 100% of the planned movements.

Surface wear and adhesive failure of resin attachments used in clear aligner orthodontic treatment

PURPOSE

This study evaluated adhesive and cohesive failures and the surface wear of attachments employed in clear aligner treatment (CAT) using three-dimensional (3D) superimposition.

METHODS

In all, 3D models of 150 teeth were obtained from intraoral scans from patients undergoing CAT with at least 4 months between each scan. Of the initial sample, 25 teeth were discarded, and 125 teeth were included in the study. Superimpositions of each individual tooth at the first and second time points were made using computer-aided design (CAD) software (Meshmixer; Autodesk, Mill Valley, CA, USA). Analyses were performed to compare surface wear and failures related to type of attachment (optimized/conventional), dental group (molars/premolars/anterior teeth), and arch (mandibular/maxillary). Mann-Whitney and Kruskal-Wallis statistical tests were applied with significance set at 5%.

RESULTS

More surface wear was observed in conventional attachments, mandibular and anterior teeth with statistical significance for surface wear on the distal surface of conventional attachments (p < 0.05). Cohesive failure was observed in 10% of attachments, occurring most frequently on optimized attachments and molar teeth. Adhesive failure was observed in 10% of the samples, more frequently on conventional attachments and posterior teeth.

CONCLUSION

Attachment type (conventional vs. optimized) was significantly correlated with surface wear on the distal surface of the attachment. Arch (mandibular or maxillary) and group of teeth (anterior or posterior) showed no correlation with surface wear. Failure, both adhesive and cohesive, correlated with attachment type and group of teeth, but not with the arch in which they were located.

An evaluation of the Invisalign® Aligner Technique and consideration of the force system: a systematic review

OBJECTIVE

Since its introduction 25 years ago, the Invisalign® system has undergone multiple digital and biomechanical evolutions and its effectiveness is often compared to traditional systems without considering the many differences which characterize them. The main aim of this systematic review is to look at the literature dealing with studies on teeth movements using the Invisalign® system and the management of these movements through digital planning and artificial intelligence.

MATERIALS AND METHODS

The following electronic databases were searched: MEDLINE, Embase, the Cochrane Oral Health Group's Trials Register, and CENTRAL. Unpublished studies were searched on ClinicalTrials.gov, the National Research Register, and Pro-Quest Dissertation Abstracts and Thesis database.

RESULTS

Twenty-four studies (15 retrospective, 5 prospective, 2 pilot, and 2 case-control) were included. The results of the analysis carried out on the available literature show that the Invisalign® system is recognized to be a valid alternative to conventional orthodontic treatment in no-extraction cases. The results are influenced by the methods for assessing the effectiveness of this technique and by the comparison bias of the traditional system with the innovative digital system.

CONCLUSIONS

Since the introduction of SmartForce and SmartTrack material, the efficacy of the treatment has improved. There is still a shortage of high-quality evidence concerning the treatment modality. In order to make the treatment with the aligners more efficient, a correct management of the ClinCheck® software and a proper use of the biomechanics are necessary. The aligned force-driven system should be taken into account when developing the digital planning.

In vivo aging-induced surface roughness alterations of Invisalign® and 3D-printed aligners

OBJECTIVE

To assess the surface roughness of in-house 3D-printed orthodontic aligners compared with Invisalign® appliances, both retrieved as well as in the 'as-received' control status.

DESIGN

An in vitro study following intra-oral material aging.

SETTING AND PARTICIPANTS

Twelve clinically used Invisalign® appliances and the same number of 3D-printed aligners, without involvement of attachments, were obtained from a respective number of patients. A similar number of 'as-received' aligners, of each material, were used as control (CON) groups.

METHOD

Four groups of materials were examined: A = Invisalign® CON; B = Invisalign® used; C = 3D-printed CON; and D = 3D-printed used. Optical profilometry was employed to examine the following surface roughness parameters: amplitude parameters Sa, Sq and Sz and functional parameters Sc and Sv. Descriptive statistics and quantile regression modeling were conducted, and the level of statistical significance was set at α = 0.05.

RESULTS

Intra-oral exposure of 3D-printed aligners was significantly associated with increase in all tested parameters (P < 0.001 at all occasions). Significant differences were detected in the retrieved 3D-printed aligners compared with Invisalign® retrieved, with the exception of Sz. The respective effect sizes (median differences) were as follows: Sa: 169 nm, 95% confidence interval [CI] = 89-248, P < 0.001; Sq: 315 nm, 95% CI = 152-477, P < 0.001; Sc: 233 nm3/nm2, 95% CI = 131-335, P < 0.001; and Sv: 43 nm3/nm2, 95% CI = 17-68, P = 0.002.

CONCLUSION

Within the limitations of this study, we concluded that surface roughness differences existed between 3D-printed aligners and Invisalign® in the retrieved status, as well as between the control and retrieved 3D-printed groups.

Impact of Orthodontic Appliances on Hiring Prospects in Saudi Arabia: A Cross-Sectional Study

This study provides valuable insights into the cosmetic impact of orthodontic appliances on job-hiring prospects in Saudi Arabia. Both ceramic braces and clear aligners are considered cosmetic corrective devices compared to traditional metallic braces. This survey-based, cross-sectional study used two models, one male, and one female. Four standardized smiling frontal photographs were taken for each model: one without any appliance and three with different orthodontic appliances (i.e., metal braces, ceramic braces, and clear aligners). The photographs of each model were shown to potential employers, followed by three questions for each photo to assess the employers' views on the applicants' professionalism, communication skills, and the likelihood of being hired. The survey was distributed via an electronic questionnaire to employers in Saudi Arabia, collecting feedback from 189 participants. The sample was collected from October 2022 to February 2023. The models' scores while wearing metal and ceramic bracket appliances were significantly lower than when the models were wearing clear aligners or were not wearing any appliance in each domain. In conclusion, orthodontic appliances have cosmetic implications that affect job-hiring prospects, with a higher chance of being hired if the candidate does not have an orthodontic appliance.

Effectiveness and predictability of treatment with clear orthodontic aligners: A scoping review

INTRODUCTION

In an ideal clinical setting, orthodontic therapy with clear aligners (CA) should improve the patients' initial malocclusion and must guarantee equivalence between the results predicted and those obtained clinically to be considered an effective treatment. Therefore, this scoping review aimed to identify the orthodontic literature concerning the effectiveness and predictability of CA treatments.

METHODS

A systematic computerized search was performed in 3 databases: PubMed, Scopus, and Embase. Inclusion criteria selected observational and clinical studies performed in at least 10 adult orthodontic patients, whose results of CA treatment's effectiveness and/or predictability were assessed.

RESULTS

The 3 database computerized searches resulted in 1,553 articles, and 169 full texts were considered potentially relevant. After applying the eligibility criteria, 33 studies were included. Most studies (76%) were designed as cohort studies and have been published in the last 5 years (79%). The majority included only non-extraction treatments (73%), and 79% reported results achieved with the Invisalign® system. The most predictable movement was the buccolingual tipping, while the least predictable movements were rotation, intrusion, and extrusion. Aligner treatment was effective for mild to moderate crowding resolution, and the success of overbite correction still seems to be limited.

CONCLUSIONS

The studies have demonstrated improvement of initial malocclusion through CA treatments. Still, predictability degree is overestimated and does not accurately reflect the occlusion immediately at the end of treatment. In future studies, there should be an effort to broaden the utilization of alternative aligner systems beyond Invisalign® and broadly disseminate their outcomes to strengthen clear aligners evidence base.

Predictability of orthodontic tooth movement with aligners: effect of treatment design

BACKGROUNDS

The present study was designed to define: (1) which are the less predictable OTM with Invisalign aligners when the treatment plan is designed by expert operators, (2) if the presence and shape of attachments influence the predictability of OTM and (3) if patients' demographics influence OTM predictability. The sample comprises 79 prospectively recruited patients (mean age 30.8 years; SD 12.0; 23 M, 56 F), treated by expert operators with an average of 27 aligners (SD 15) in the maxillary arch and 25 aligners (SD 11) in the mandibular arch. Post-treatment digital models and final virtual treatment plan models were exported from ClinCheck® software as STL files and subsequently imported into Geomagic Qualify ®software, to compare final teeth positions. The differences were calculated and tested for statistical significance for each tooth in the mesial-distal, vestibular-lingual and occlusal-gingival directions, as well as for angulation, inclination and rotation. In addition, the statistical significance of categorical variables was tested.

RESULTS

The lack of correction was significant for all movements and in all group of teeth (P < 0.01) except for the rotation of maxillary first molar. The prescribed OTM, the group of teeth and movement, the frequency of aligner change and the use of attachment influence the outcome. The greatest discrepancies in predicted and achieved tooth position were found for angular movements and rotation of teeth characterized by round-shaped crowns, for a ratio of approximately 0.4° per 1° prescribed. Optimized attachments for upper canines and lower premolar rotation seem not working properly. Second molar movements are mostly unexpressed. Furthermore, changing the aligner every 14 days will reduce the lack of correction of the 12% with respect to 7 days aligner change.

CONCLUSIONS

Predictability of orthodontic movement with aligners still has limitations related to the biomechanics of the system: the shape of some attachments and the characteristics of aligner material need to be redefined. However, the results of this study allow to properly design the virtual treatment plan, revealing how much overcorrection is needed and which attachments are most effective.

Orthodontic pretreatment with aligners for optimizing the result prior to fixed restorations in the esthetic zone

OBJECTIVE

To show the benefit of a minor orthodontic pretreatment prior to fixed restorations in the esthetic zone in challenging situations.

OVERVIEW

Esthetic rehabilitations in complex situations need careful treatment planning and comprehensive interdisciplinary approach. Minor orthodontic pretreatments may transfer complex situations into straight forward situations. Typical indications are space opening in order to provide space for a restoration with anatomic proportion or corrections of the tooth axis.

CONCLUSION

This article presents three clinical cases that show how decision making can be facilitated by a functional and esthetic wax-up/mock-up workflow and how orthodontic pretreatment can contribute to a more functional, less invasive, and more esthetic outcome of restorative treatments in the esthetic zone.

CLINICAL SIGNIFICANCE

Some complex cases in restorative dentistry can be transformed to straight forward cases with the help of minor orthodontic tooth movements.

Aligner hybrid orthodontic approach to treat severe transverse divergence in an adolescent girl: A case report

OBJECTIVE

To resolve a complex Class II case with unilateral crossbite through an aesthetic approach, namely a hybrid orthodontic treatment combining aligners with miniscrews and auxiliaries.

MATERIALS AND METHODS

A 14-year-old hypodivergent female patient with dental Class II and posterior crossbite presented for orthodontic treatment. The patient refused conventional fixed multibracket treatment and was therefore prescribed aligners used in association with miniscrews and sectional lingual appliances. Pre- and post-treatment records and 2-year follow-up records are presented.

RESULTS

Treatment objectives, namely ideal occlusion and improved profile, were achieved in 12 months. Post-treatment panoramic radiography showed good root parallelism, and no sign of either crestal bone height reduction or apical root resorption. The patient was satisfied with the functional and aesthetic outcomes, which were stable at 2 years.

CONCLUSION

This case report illustrates that a hybrid aligner approach may be used to treat posterior crossbite and class II malocclusion with reduced treatment times, optimal oral hygiene and excellent aesthetics.

Cytotoxicity and estrogenicity of a novel 3-dimensional printed orthodontic aligner

INTRODUCTION

Orthodontic aligners printed with in-office 3-dimensional (3D) procedures have been described, but no data on their biocompatibility exist. This study investigates the cytotoxicity and estrogenicity of a 3D-printed orthodontic aligner by assessing its biological and behavioral effects.

METHODS

Ten sets of 1 type of aligner were immersed in sterile deionized water for 14 days, and the cytotoxicity and estrogenicity of released factors were assessed via MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) assays on human gingival fibroblasts and the estrogen-sensitive MCF-7 and the estrogen-insensitive MDA-MB-231 breast cancer cell lines. 17β-Estradiol and bisphenol-A were used as positive controls. The statistical analysis of data was performed with generalized linear models at a 0.05 level of significance.

RESULTS

No signs of cytotoxicity were seen for the aligner samples for concentrations (v/v) of 20% (P = 0.32), 10% (P = 0.79), or 5% (P = 0.76). The antioxidant activity expressed as the capacity to reduce intracellular levels of reactive oxygen species was not affected in the aligner samples (P = 0.08). No significant estrogenicity was induced by the aligner samples compared with eluents from the negative control for both MCF-7 (P = 0.65) and MDA-MB-231 (P = 0.78). As expected, 17β-Estradiol and bisphenol-A stimulated MCF-7 cell proliferation, whereas no effect was observed on MDA-MB-231 cells.

CONCLUSIONS

In conclusion, if any factors were released during the 14-day aging of 3D-printed aligners in water, these were not found to be cytotoxic for human gingival fibroblasts and did not affect their intracellular reactive oxygen species levels. Moreover, no estrogenic effects of these putative eluates were observed based on an E-screen assay.

Predicting Interest in Orthodontic Aligners: A Google Trends Data Analysis

Aligners are an example of how advances in dentistry can develop from innovative combinations of 3D technologies in imaging, planning and printing to provide new treatment modalities. With increasing demand for esthetic orthodontic treatment, aligners have grown in popularity because they are esthetically more pleasing and less obstructive to oral hygiene and other oral functions compared to fixed orthodontic appliances. To observe and estimate aligner treatment interest among Google Search users, Google Trends data were obtained and analyzed for the search term, "Invisalign". A prediction of interest for the year 2022 for three European Union countries with the highest GDP was developed. "Invisalign" was chosen to represent all orthodontic aligners as the most searched term in Google Trends for aligners. This is the first study to predict interest in the query "Invisalign" in a Google search engine. The Prophet algorithm, which depends on advanced statistical analysis methods, positions itself as an automatic prediction procedure and was used to predict Google Trends data. Seasonality modeling was based on the standard Fourier series to provide a flexible model of periodic effects. The results predict an increase in "Invisalign" in Google Trends queries in the coming year, increasing by around 6%, 9% and 13% by the end of 2022 compared to 2021 for France, Italy and Germany, respectively. Forecasting allows practitioners to plan for growing demand for particular treatments, consider taking continuing education, specifically, aligner certification courses, or introduce modern scanning technology into offices. The oral health community can use similar prediction tools and methods to remain alert to future changes in patient demand to improve the responses of professional organizations as a whole, work more effectively with governments if needed, and provide better coordination of care for patients.

Clinical effectiveness of clear aligner treatment compared to fixed appliance treatment: an overview of systematic reviews

OBJECTIVE

To evaluate the available evidence regarding clinical effectiveness of clear aligner treatment (CAT).

MATERIALS AND METHODS

A comprehensive literature search was conducted for systematic reviews investigating effectiveness of CAT published up to July 15, 2021. This was accomplished using different electronic databases. No language restriction was applied. Screening, quality assessment, and data extraction were performed by two authors independently. Information was categorized and narratively synthesized for the key findings from moderate and high-quality reviews.

RESULTS

A total of 361 potentially eligible reviews were identified. After excluding the non-relevant/low-quality reviews, 18 systematic reviews were included. CAT was found to be effective for mild to moderate malocclusions, and was associated with inferior outcomes when treating severe cases or with achieving specific tooth movements. There were conflicting results regarding treatment duration; however, CAT may be associated with shorter treatment in mild to moderate cases. Relapse was greater with CAT, while periodontal health was better. The risk of root resorption tended to be lower with CAT. Regarding pain, the results were unclear, although CAT was found to be more comfortable and associated with a reduced impact on eating and chewing.

CONCLUSIONS

The level of evidence regarding CAT is moderate; hence, further high-quality randomized clinical trials are required. Evidence supports use of aligners as an alternate to fixed appliances in patients with mild-to-moderate malocclusion but not in severe cases. Advancement in technology could enhance the accuracy of CAT in delivering planned outcomes.

CLINICAL RELEVANCE

CAT can be used effectively for selected cases with mild to moderate malocclusion.

REGISTRATION

PROSPERO registration number: CRD42021246855.