In vitro Estrogenicity of Resin Composites

Non-monotonic effects of Bisphenol A Dimethacrylate on male mouse reproductive system and fertility leads to impaired conceptive performance

As an estrogenic agent, Bisphenol A Dimethacrylate (Bis-DMA) may incite alterations in both the reproductive tract and the neuroendocrine axis, and thus have the potential to affect the proper development, maturity and conceptive performance in animals. We investigated the consequences of 14 weeks of exposure to different concentrations of Bis-DMA on male mouse conceptive performance. Male mice were exposed to Bis-DMA (0, 0.1 mg/L, 1.0 mg/L or 10 mg/L) via drinking water, and the effects on fertility, reproductive organ weights, reproductive hormone levels, sperm counts and testicular histology were assessed. We clearly demonstrate that prolonged exposure of male mice to Bis-DMA negatively affects fertility and reproduction causing significant reductions in sperm counts, non-monotonic effects on serum LH and testosterone levels, increased seminal vesicle weights, lower number of embryonic implantations and viable fetuses, as well as, increased embryonal resorptions in females mated by Bis-DMA treated males. Furthermore, Bis-DMA caused abnormalities in testicular infrastructure with atrophic seminiferous tubules exhibiting intraepithelial vacuolization and disorganization, loss and shedding of germ cells into the lumen, and presence of apoptotic cells. Our data collectively suggest that Bis-DMA adversely affects male fertility and reproduction by interference with normal hormone signaling in the testis, inducing changes in testicular infrastructure and ultimately leading to impaired reproductive function and fertility.

Comprehensive assessment of the estrogenic activity of resin composites

Resin-based dental composites have been developed to restore decayed teeth or modify tooth color due to their excellent physical and chemical properties. Such composites may have intrinsic toxicity due to components released into the mouth during the early stage of polymerization, and afterward as a result of erosion or material decomposition. In addition, resin-based dental composites have potential environmental pollutant by elution of monomers and degradation. Since certain monomers of resin matrices are synthesized from bisphenol A (BPA), which acts as an estrogenic endocrine disruptor, these resin matrices may have estrogenic activity. Therefore, the estrogenic endocrine-disrupting activity of various dental composites should be evaluated. In this study, we evaluated the estrogenic endocrine-disrupting activity of 10 resin composites by using a BRET-based estrogen receptor (ER)α and ERβ dimerization assays and ER transactivation assay. BPA, BisDMA, BisGMA, BisEMA, TEGDMA, HMBP, and DMPA mediated ERα dimerization, and BPA, BisDMA, and DMPA also mediated ERβ dimerization. Except for UDMA and CQ, all the compounds were identified as estrogen agonists or antagonists. In-depth information for the safe use of dental composites was acquired, and it was confirmed how the component of dental composites acts in the ER signaling pathway. Further studies on the low-dose and long-term release of these compounds are needed to ensure the safe use of these resin-based dental composites.

Comparison of residual monomer amounts released from indirect bonding adhesives

OBJECTIVES

To quantify the amount of residual monomer released from orthodontic adhesives used in the indirect bonding technique and compare it to a direct bonding composite resin.

MATERIALS AND METHODS

Five hundred stainless steel orthodontic brackets were bonded on bovine incisors using five groups of bonding resins: Transbond XT (TXT), Transbond Supreme LV (SLV), Sondhi Rapid-Set (SRS), Transbond IDB (IDB), and Custom I.Q. (CIQ). Liquid samples were gathered on the first, seventh, 21st, and 35th days. Residual monomer release was measured from the liquid samples with a liquid chromatography device. In addition, the amount and shape of the adhesive between the tooth surface and the bracket base was evaluated using obtained electron microscopy images. The data were analyzed using analysis of variance, and a Tukey post-hoc test was applied.

RESULTS

Hydroxyethylmethacrylate and bisphenol A-glycidyl methacrylate monomers were released by all study groups. Urethane-dimethacrylate was released from the TXT, SLV, IDB, and CIQ groups. Triethylene glycol dimethacrylate was released from TXT, SLV, IDB, and SRS groups. The amount of total monomer release was higher in chemically cured adhesives than in light-cured adhesives. Among the chemically cured adhesives, premix adhesives had the highest amount of total monomer release. The light-cured adhesives had less thickness.

CONCLUSIONS

Light-curing adhesives have significantly less monomer release than chemically polymerized adhesives.

A comparative life cycle assessment of dental restorative materials

OBJECTIVES

Different types of direct-placement dental materials are used for the restoration of structure, function and aesthetics of teeth. The aim of this research investigation is to determine, through a comparative cradle-to-gate life cycle assessment, the environmental impacts of three direct-placement dental restorative materials (DRMs) and their associated packaging.

METHODS

Three direct-placement dental materials; dental amalgam, resin-based composite (RBC) and glass polyalkenoate cements (GIC) are assessed using primary data from a manufacturer (SDI Limited, Australia). The functional unit consisted of 'one dental restoration' of each restorative system under investigation: 1.14 g of dental amalgam; 0.25 g of RBC (plus the adhesive = 0.10 g); and 0.54 g of GIC. The system boundary per restoration included the raw materials and their associated packaging materials for each DRM together with the processing steps for both the materials and packaging. The environmental impacts were assessed using an Egalitarian approach under the ReCiPe method using Umberto software and the Ecoinvent database. Nine different impact categories were used to compare the environmental performance of these materials.

RESULTS

Dental amalgam had the highest impact across most of the categories, but RBC had the highest Global Warming Potential. The highest sources of the environmental impacts for each restorative material were: Amalgam, derived from material use; RBC, derived from energy use in processing material and packaging material; GIC, derived from material and energy use for packaging.

SIGNIFICANCE

Less intensive energy sources or more sustainable packaging materials can potentially reduce the impacts associated with RBC and GIC thus making them suitable alternatives to dental amalgam.

Safety and efficacy of a feed additive consisting of butylated hydroxytoluene (BHT) for all animal species (Lanxess Deutschland GmbH)

Following a request from the European Commission, the Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) was asked to deliver a scientific opinion on the safety and efficacy of butylated hydroxytoluene (BHT) as a feed additive for all animal species. The additive BHT is considered safe for chickens for fattening and weaned piglets at the maximum proposed concentration of 150 mg/kg complete feed. This conclusion is extended to chickens reared for laying and extrapolated to pigs for fattening. In the absence of data, no conclusion on the safety for the other target species could be drawn. The exposure of the consumer to BHT from tissues and products of animals fed the additive ranged from 1% to 3% of the acceptable daily intake (ADI). The FEEDAP Panel concluded that the use of BHT as a feed additive at the proposed conditions of use is of no concern for the safety of the consumers. Exposure of the user to BHT via inhalation is likely; however, the Panel is not in the position to conclude on the potential inhalation toxicity of the additive. BHT is a skin and eye irritant, no conclusions can be drawn on the potential of the additive to be a skin sensitiser. In the absence of data, the FEEDAP Panel cannot conclude on the safety of BHT for the environment. The additive BHT is considered an efficacious antioxidant in feedingstuffs for all animal species.

Safety and efficacy of a feed additive consisting of butylated hydroxytoluene (BHT) for all animal species (Katyon Technologies Limited)

Following a request from the European Commission, the Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) was asked to deliver a scientific opinion on the safety and efficacy of butylated hydroxytoluene (BHT) as a feed additive for all animal species. The additive BHT is considered safe for chickens for fattening and weaned piglets at the maximum proposed concentration of 150 mg/kg complete feed. This conclusion is extended to chickens reared for laying and extrapolated to pigs for fattening. In the absence of data, no conclusion on the safety for the other target species could be drawn. The exposure of the consumer to BHT from tissues and products of animals fed the additive ranged from 1% to 3% of the acceptable daily intake (ADI). The FEEDAP Panel concluded that the use of BHT as a feed additive at the proposed conditions of use is of no concern for the safety of the consumers. Exposure of the user to BHT via inhalation is likely; however, the Panel is not in the position to conclude on the potential inhalation toxicity of the additive. BHT is a skin and eye irritant, no conclusions can be drawn on the potential of the additive to be a skin sensitiser. In the absence of data, the FEEDAP Panel cannot conclude on the safety of BHT for the environment. The additive BHT is considered an efficacious antioxidant in feedingstuffs for all animal species.

Preparation and evaluation of novel bio-based Bis-GMA-free dental composites with low estrogenic activity

OBJECTIVE

Although bisphenol Aglycidyl methacrylate (Bis-GMA) are widely used in the dental composite, its raw materials include the petroleum-based product bisphenol A (BPA) with high estrogenic activity (EA). In this study, two new BPA-free dimethacrylate monomers from bio-based material creosol were synthesized and evaluated.

METHODS

The renewable bisphenol monomer 5, 5'-methylenedicreosol (BCF) was prepared from bio-based material creosol. By the human breast cancer cells (MCF-7 cells) proliferation assay, a risk assessment of BCF was performed to determine if BCF possessed reduced EA in comparison to BPA. Then, the novel monomers 5, 5'-methylenedicreosol diglycidyl ether diacrylate (BCF-EA) and 5, 5'-methylenedicreosol diglycidyl ether dimethacrylate (BCF-GMA) were synthesized from BCF with epichlorohydrin and (meth)acrylate. All products were investigated by ¹H NMR and FT-IR spectra. The control resin was a mixture based on Bis-GMA and tri(ethyleneglycol) dimethacrylate (TEGDMA) with a weight ratio of 5:5 (5B5T). Similarly, experimental resin matrix was a mixture based on BCF-EA/TEGDMA (5E5T) and BCF-GMA/TEGDMA (5G5T). And their corresponding composites were then prepared with corresponding resin matrices and hybrid SiO₂ (5E5TC, 5G5TC and 5B5TC). The properties of these composites were investigated according to the standard or referenced methods. Each sample was evaluated for double bond conversion (DC), shrinkage stress (SS) and volumetric polymerization shrinkage (VS). Water sorption (WS), water solubility (SL), mechanical properties and cytotoxicity were also measured.

RESULTS

¹H NMR and FT-IR spectra confirmed the chemical structure of each monomer. EA test revealed that bio-based bisphenol monomer BCF as the precursor of BCF-EA and BCF-GMA showed lower EA than BPA. Cured resin matrix: Both 5E5T and 5G5T had nearly the same DC (p < 0.05), which was higher than 5B5T (p < 0.05); 5E5T and 5G5T had lower VS, SL and cytotoxicity than 5B5T (p < 0.05); mechanical properties of 5E5T and 5G5T were all better than those of 5B5T (p < 0.05). Cured composite: There was no significant difference in conversion (p < 0.05); 5E5TC and 5G5TC had significantly lower VS (p < 0.05); WS of 5E5TC and 5G5TC were similar (p < 0.05), but higher compared to 5B5TC (p < 0.05); 5E5TC and 5G5TC had the deeper depth of cure (p > 0.05); before water immersion, there was no significant difference in flexural strength between 5E5TC and 5G5TC (p > 0.05), and higher than 5B5TC (p < 0.05); 5E5TC and 5G5TC showed less cytotoxicity than 5B5TC (p < 0.05).

SIGNIFICANCE

The new BPA-free di(meth)acrylates are promising photocurable dental monomers owning to bio-based raw material, high degree of conversion coupled with low curing shrinkage and good mechanical properties. Therefore, BCF-EA and BCF-GMA has a potential to be used as the substitution for Bis-GMA to prepare Bis-GMA-free dental composite.

Identification of chemicals leaching from dental resin-based materials after in vitro chemical and salivary degradation

OBJECTIVES

Only little is known about degradation of methacrylate monomers. Therefore, using in vitro chemical and saliva degradation this study aimed to identify the degradation products of organic compounds present in resin-based dental materials.

METHODS

Ten dental monomers and nine polymerized dental resin-based materials were immersed for 24 h in chemical media (0.1 M HCl, 0.1 M NaOH) and human pooled saliva in order to identify leached monomers and degradation products from chemical and saliva degradation. Samples were analyzed using liquid chromatography coupled to high-resolution mass spectrometry to identify previously unknown degradation products.

RESULTS

During in vitro chemical degradation, uncured monomers were rapidly hydrolyzed into mono- and demethacrylated degradation products. During chemical degradation in alkaline conditions of polymerized materials, considered the worst-case scenario, only degradation products could be detected. In acidic conditions, monomers and their degradation products were detected. In addition, different additives such as EDMAB, DMPA and HMBP were present in acidic degradation samples. Degradation in human pooled saliva for 24 h to mimic the in vivo situation, resulted in the identification of both monomers and their degradation products.

CLINICAL SIGNIFICANCE

Using state-of-the-art high-resolution mass spectrometry previously unknown degradation products of commonly used monomers were identified for the first time. Results show that patients may be exposed to monomers and their degradation products in the first 24 h after restorative procedures. The results provide a base for further research on the degradation of resin-based dental composites in order to assess their safety using elution and toxicity studies.

Assessing the estrogenic activity of chemicals present in resin based dental composites and in leachates of commercially available composites using the ERα-CALUX bioassay

OBJECTIVE

The biocompatibility of resin based dental composites has not yet been fully characterized even though certain monomers used in these composites are synthesized from Bisphenol A (BPA), a well-known estrogenic endocrine disruptor. As a result, they show structural relationship to BPA and can contain it as an impurity. Therefore, the estrogenic activity of 9 monomers, 2 photoinitiators, one photostabilizer and leachates of 4 commercially available composites was determined.

METHODS

The ERα-CALUX bioassay was used to determine both agonistic and antagonistic estrogenic activities of the pure compounds (BPA, BisDMA, BisGMA, BisEMA(3), BisEMA(6), BisEMA(10), TEGDMA, TCD-DI-HEA, BADGE, UDMA, HMBP, DMPA, CQ) and the leachates of cured composite disks. The leachates of 4 commercially available composites (Solitaire 2, Ceram.x Spectra ST, G-ænial Posterior and Filtek Supreme XTE) in water and 0.1 M NaOH (pH = 13, 'worst-case scenario') were tested for estrogenic activity (pooled leachates from 10 cured composite disks).

RESULTS

Agonistic estrogenic activity was found for the monomer BisDMA, the photostabilizer HMBP and photoinitiator DMPA. All leachates from the 4 tested composites showed significant agonistic estrogenic activity higher than the DMSO control, and the highest activity (potency and efficacy) was found for Solitaire 2, followed by Ceram.x Spectra ST. Furthermore, antagonistic estrogenic activity was found in the leachates from G-ænial Posterior.

SIGNIFICANCE

These results show that significant estrogenic activity was found in all leachates of the cured composite disks, and that this estrogenicity is most likely due to a mixture effect of multiple estrogenic compounds (including BPA, HMBP and DMPA). This indicates that further research into the endocrine activity of all the compounds that are present in these composites (even at low quantities) and their possible mixture effect is warranted to guarantee their safe use.

Long-term elution of bisphenol A from dental composites

OBJECTIVES

BPA release from composites on the short term has been reported in several in-vitro and in-vivo studies. However, it remains unclear whether these materials also leach BPA on the long term. Even though composites may release various (BPA-based) methacrylate monomers up to one year, quantitative data about BPA have not been reported due to the lack of a sensitive method to accurately quantify low levels of BPA. In this context, the aim of the study was to quantify the one-year release of BPA with an optimized analytical method.

METHODS

Composite disks (n = 6, 6 mm diameter and 2 mm height) from four commercial materials (G-ӕnial Posterior, Venus, Ceram.x mono and Filtek Supreme XTE) were immersed in 1 mL of water or ethanol as extraction solvent and stored in the dark at 37 °C. The extraction solvent was renewed weekly for a period of 52 weeks. Samples were derivatized with pyridine-3-sulfonyl chloride before analysis with ultra-pressure liquid chromatography tandem mass spectrometry (UPLC-MS/MS).

RESULTS

Derivatizing BPA increased the sensitivity of the analytical method and allowed accurate quantification of very low levels of BPA (i.e. 0.78 pmol BPA). BPA eluted continuously in ethanol from all four tested composites over a period of one year. BPA elution was clearly higher when ethanol was used as extraction solution. In water, BPA eluted could be detected up to one year, but levels could not be accurately quantified anymore after several weeks.

SIGNIFICANCE

Composites can be considered as a potential long-term source of BPA, and thus should not be neglected when assessing the overall exposure to endocrine disrupting chemicals.

Characterisation of Microparticle Waste from Dental Resin-Based Composites

Clinical applications of resin-based composite (RBC) generate environmental pollution in the form of microparticulate waste. Methods: SEM, particle size and specific surface area analysis, FT-IR and potentiometric titrations were used to characterise microparticles arising from grinding commercial and control RBCs as a function of time, at time of generation and after 12 months ageing in water. The RBCs were tested in two states: (i) direct-placement materials polymerised to simulate routine clinical use and (ii) pre-polymerised CAD/CAM ingots milled using CAD/CAM technology. Results: The maximum specific surface area of the direct-placement commercial RBC was seen after 360 s of agitation and was 1290 m²/kg compared with 1017 m²/kg for the control material. The median diameter of the direct-placement commercial RBC was 6.39 μm at 360 s agitation and 9.55 μm for the control material. FTIR analysis confirmed that microparticles were sufficiently unique to be identified after 12 months ageing and consistent alteration of the outermost surfaces of particles was observed. Protonation-deprotonation behaviour and the pH of zero proton charge (pH_zpc) ≈ 5–6 indicated that the particles are negatively charged at neutral pH7. Conclusion: The large surface area of RBC microparticles allows elution of constituent monomers with potential environmental impacts. Characterisation of this waste is key to understanding potential mitigation strategies.

Cytotoxicity evaluation of dental and orthodontic light-cured composite resins

INTRODUCTION

The aim of this study was to determine the cytotoxicity of light-cured composite resins (Clearfil ES-2, Clearfil ES Flow, Filtek Supreme XTE, Grengloo, Blugloo, Transbond XT, and Transbond LR) then to assess leachable components in contact with human gingival fibroblasts (GFs) and to quantity detected bisphenol A (BPA).

METHODS

Light-cured composite resin discs were immersed for 24 hours in gingival fibroblastic medium (n = 3 for each product) and in control medium (n = 2 for each product) contained in plate. Cytotoxicity of the products (n = 95) was determined by the measure of cell viability using MTT assay after reading the optical densities of the plates. The analysis of leachable components was done by gas phase chromatography and mass spectrometry (GC-MS) and detected BPA was quantified. The limit of quantification was 0.01 μg/mL. Statistical analyses were performed by using IBM SPSS Statistics 20 and Kruskal-Wallis and Mann-Whitney U-tests were applied.

RESULTS

Cell viabilities were between 85 and 90%. Many chemical compounds including triethylene glycol dimethacrylate (TEGDMA) and BPA were identified. The average concentrations were 0.67 μg/mL ± 0.84 in the control medium and 0.73 μg/mL ± 1.05 in the fibroblastic medium. Filtek Supreme XTE presented the highest concentration of BPA with 2.16 μg/mL ± 0.65 and Clearfil ES Flow presented the lowest with 0.25 μg/mL ± 0.35. No BPA was detected with Transbond XT and Transbond LR. Clearfil ES Flow, Filtek Supreme XTE, Grengloo and Transbond LR presented residual TEGDMA.

CONCLUSIONS

Light-cured composite resins are slightly cytotoxic opposite GFs and release many components including BPA and TEGDMA. Clinical precautions should be taken to decrease the release of these monomers.

Biodegradation of orthodontic composites by Streptococcus mutans: An in vitro qualitative and quantitative assessment

Objectives:

The purpose of this study was to evaluate the degradation products of orthodontic composites (Grengloo, Blugloo, Transbond XT, and Transbond LR) by Streptococcus mutans and then to quantify the levels of released bisphenol A (BPA) using gas-phase chromatography and mass spectrometry (GC–MS).

Materials and Methods:

Orthodontic light-cured composite discs were incubated at 37°C in brain heart infusion (BHI) (control group) and in a culture of S. mutans with BHI (test group). Incubation solutions were collected every 48 h in each group and replaced with fresh solutions. These incubation solutions were accumulated and grouped. The assessment of degradation products from composites was done at 1 and 30 days. Detected BPA was then quantified. The limit of quantification was 0.01 μg/mL.

Results:

Degradation products were present at day 30. For the test group, BPA was detected in Blugloo at day 1 (0.38 μg/mL) and triethylene glycol dimethacrylate (TEGDMA) was detected in Grengloo and Transbond LR at day 1.

Conclusion:

S. mutans can hydrolyze long-term orthodontic composites. Monomers such as BPA and TEGDMA may be present in degradation products. It is possible to separate and identify leaching compounds by GC–MS technique.

Dentin tubule obturation of a bioglass-based dentin desensitizer under repeated exposure to lactid acid and brushing

Background

Dentin hypersensitivity is a frequent finding especially in periodontitis patients. Conventional treatment aims for obstruction of dentin tubules by disabling liquid and osmotic fluctuation to and from the pulpal chamber. A novel bioglass-based desensitizer was shown to obstruct tubules and to resist periodic exposure to lactic acid. Whether this obstruction is resistant to brushing had not been tested so far. Accordingly, the present study aimed to assess dentin tubule obstruction after repeated acid exposure and brushing.

Methods

Sixty dentin discs were cleaned with 17% EDTA, mounted into a pulp fluid simulator and randomly divided into 3 groups: No surface treatment in Group A, Seal&Protect® in group B and DentinoCer in group C. Discs were exposed to 0.1 M non-saturated lactic acid thrice and standardized brushing twice a day for 12 days. At baseline and after 2, 4 and 12 d samples were removed from the setting and prepared for top-view SEM analysis to assess tubule obstruction using the Olley score. Discs were then vertically cut and the section surface morphologically assessed using backscatter imaging. For both vertical and sectional surfaces EDX analysis was used to characterize the surface composition in the tubular and inter-tubular area.

Results

Group A showed clean tubular lumina at all time points. From day 2 onwards dentin showed exposed collagen fibers. Group 2 initially showed a complete surface coverage that flattened out during treatment without ever exposing tubules. At baseline, samples of Group C displayed a complete homogeneous coverage. From day 2 on tubules entrances with obstructed lumen became visible. While on day 4 and 12 the dentin surface exposed collagen fibers the lumina remained closed. EDX analysis of the vertical and horizontal views showed that P and Ca were predominant elements in both the inter- and tubular dentin while Si peaks were found in the tubule plugs.

Conclusion

While group B displayed a packed layer on the surface during the whole investigation time group C samples lost their superficial layer within 48 h. Tubule plugs containing considerable Si proportions indicated previous presence of DentinoCer, while high Ca and P proportions suggest obturation by dentin-like material.

Determining the endocrine disruption potential of industrial chemicals using an integrative approach: Public databases, in vitro exposure, and modeling receptor interactions

Environmental and occupational exposure to industrial chemicals has been linked to toxic and carcinogenic effects in animal models and human studies. However, current toxicology testing does not thoroughly explore the endocrine disrupting effects of industrial chemicals, which may have low dose effects not predicted when determining the limit of toxicity. The objective of this study was to evaluate the endocrine disrupting potential of a broad range of chemicals used in the petrochemical sector. Therefore, 139 chemicals were classified for reproductive toxicity based on the United Nations Globally Harmonized System for hazard classification. These chemicals were evaluated in PubMed for reported endocrine disrupting activity, and their endocrine disrupting potential was estimated by identifying chemicals with active nuclear receptor endpoints publicly available databases. Evaluation of ToxCast data suggested that these chemicals preferentially alter the activity of the estrogen receptor (ER). Four chemicals were prioritized for in vitro testing using the ER-positive, immortalized human uterine Ishikawa cell line and a range of concentrations below the reported limit of toxicity in humans. We found that 2,6-di-tert-butyl-p-cresol (BHT) and diethanolamine (DEA) repressed the basal expression of estrogen-responsive genes PGR, NPPC, and GREB1 in Ishikawa cells, while tetrachloroethylene (PCE) and 2,2'-methyliminodiethanol (MDEA) induced the expression of these genes. Furthermore, low-dose combinations of PCE and MDEA produced additive effects. All four chemicals interfered with estradiol-mediated induction of PGR, NPPC, and GREB1. Molecular docking demonstrated that these chemicals could bind to the ligand binding site of ERα, suggesting the potential for direct stimulatory or inhibitory effects. We found that these chemicals altered rates of proliferation and regulated the expression of cell proliferation associated genes. These findings demonstrate previously unappreciated endocrine disrupting effects and underscore the importance of testing the endocrine disrupting potential of chemicals in the future to better understand their potential to impact public health.

Performance of a bioglass-based dentine desensitizer under lactid acid exposition: an in-vitro study

Background

Dentine hypersensitivity is especially frequent in patients with pronounced periodontal attachment loss. Aim of the treatment is an obstruction of the dentine tubules in order to inhibit liquid or osmotic motion, which is considered as trigger for pain sensations. Novel approaches aim for obstruction by calcium phosphate compounds in order to rely on biocompatible compounds. It was the aim of the study to optically investigate the morphology and to assess the fluid permeability of treated dentine surfaces.

Methods

Dentine discs were pretreated in an ultrasonic bath with 17% EDTA to clean the lumina of the dentine tubules. Samples of group A remained untreated while Seal&Protect® as a conventional desensitizer was applied for group B and DentinoCer in group C. Discs were mounted into a pulp fluid simulator (PFS) with a methylene blue solution in order to create a flow pressure of 0.5 bar. Over 12 d, discs were exposed three times per day to 0.1 M nonsaturated lactic acid. At baseline and after 2, 8 and 12 d samples were removed from PFS and prepared for SEM analysis. Tubule obstruction was assessed quantitatively using Olley scores and by qualitative description of the surface. Absorption spectrometry was used to assess the concentration of leaked methylene blue outside the samples in order to estimate dentine permeability.

Results

Untreated discs showed clean lumina of all tubules at all time points and magnifications. From day 2 onwards dentine showed exposed collagene fibers due to acid exposition. Seal&Protect® initially showed homogenous dentine surface coverage that got a more granulomatous aspect in the course of treatment time. Few samples showed sporadic tubules with open lumen at day 8 and 12. Group C showed samples with a homogeneous, even surface. Narrow slits in the superficial layer are visible from day 4 on, but the dentine surface remained invisible and dentine tubules were closed till the end of the investigation period.

Conclusion

Over 12 d of lactid acid exposure, samples showed complete coverage of the dentine tubules in the chosen in-vitro-model when treated with Seal&Protect® or DentinoCer.

Cytotoxic and biological effects of bulk fill composites on rat cortical neuron cells

The aim of this study was to investigate potential cellular responses and biological effects of new generation dental composites on cortical neuron cells in two different exposure times. The study group included five different bulk-fill flow able composites; Surefil SDR Flow, X-tra Base Flow, Venus Bulk Flow, Filtek Bulk Flow and Tetric-Evo Flow. They were filled in Teflon molds (Height: 4 mm, Width: 6 mm) and irradiated for 20 s. Cortical neuron cells were inoculated into 24-well plates. After 80% of the wells were coated, the 3 µm membrane was inserted and dental filling materials were added. The experiment was continued for 24 and 72 h. Cell viability measured by MTT assay test, total antioxidant and total oxidant status were examined using real assay diagnostic kits. The patterns of cell death (apoptosis) were analyzed using annexin V-FITC staining with flow cytometry. Β-defensins were quantitatively assessed by RT-PCR. IL-6, IL-8 and IL-10 cytokines were measured from the supernatants. All composites significantly affected analyses parameters during the exposure durations. Our data provide evidence that all dental materials tested are cytotoxic in acute phase and these effects are induced cellular death after different exposure periods. Significant cytotoxicity was detected in TE, XB, SS, FBF and VBF groups at 24 and 72 h, respectively.

Monomer release from orthodontic retentions: An in vitro study

INTRODUCTION

The adhesives used to bond orthodontic retentions are low-loaded composite resins with a resinous matrix containing bisphenol A diglycidyl ether dimethacrylate synthesized from bisphenol A (BPA), fluidizers such as triethylene glycol dimethacrylate (TEGDMA) and hydrophilic polymers such as hydroxyethylmethacrylate. BPA disrupts the endocrine balance, and TEGDMA has high risks for human health: eg, allergies and cytotoxicity. The aim of this study was to evaluate in vitro the release of monomers from orthodontic bonded retentions.

METHODS

A reproducible model of bonded retentions was carried out using calibrated molds. We analyzed the release of monomers by gas phase chromatography coupled with mass spectrometry.

RESULTS

This model allowed us to qualitatively and quantitatively evaluate the in-vitro release of monomers from orthodontic adhesives. The quantitative and qualitative analyses showed no BPA release above the 0.02 ppm detection limit. A greater release of TEGDMA was observed with Transbond LR (31.7 μg/mL) than with Transbond XT (13.12 μg/mL) (both, 3M Unitek, Monrovia, Calif). Other toxic components (iodobenzene, iodobiphenyl, triphenyl stibine, and so on) were also identified.

CONCLUSIONS

Toxic and carcinogenic molecules not mentioned in the material safety data sheets were identified.

Impact of pecan nut shell aqueous extract on the oxidative properties of margarines during storage

BACKGROUND

The oxidative properties of margarines supplemented with pecan nut shell extract, rosemary extract and butylated hydroxytoluene (BHT) were investigated.

RESULTS

The extracts of pecan nut shell and rosemary showed a high content of total phenolics and condensed tannins (93 and 102.9 mg GAE g^-1 and 46 and 38.9 mg CE g^-1 respectively) as well as a high antioxidant activity (1257 and 2306 µmol TEAC g^-1 and 293 and 856 mg TEAC g^-1 by ABTS and DPPH methods respectively). Gallic acid, chlorogenic acid, p-hydroxybenzoic acid, epicatechin and epicatechin gallate were identified in the pecan nut shell extract. Peroxide and p-anisidine values of 3.75-4.43 meq kg^-1 and 1.22-2.73 respectively, Totox values of 9.88-10.8 and specific extinction values of 4.38-4.59 and 0.92-0.94 at 232 and 268 nm respectively were observed after 8 months of storage in the studied samples.

CONCLUSION

Margarines supplemented with pecan nut shell extract, rosemary extract or BHT during prolonged storage were found to be of equal quality within the degree of confidence limits. The extract of pecan nut shell may be considered as a natural product replacement for the synthetic antioxidant BHT. © 2016 Society of Chemical Industry.

Release of monomers from orthodontic adhesives

INTRODUCTION

Most composite resins release both bisphenol A (BPA), which disrupts the endocrine balance, and triethylene glycol dimethacrylate (TEGDMA), which has high risks for human health: eg, allergies and cytotoxicity. The aim of this study was to characterize monomers released from orthodontic adhesives.

METHODS

We studied samples of orthodontic adhesives by associating 2 techniques: gas phase chromatography and mass spectrometry.

RESULTS

The in-vitro analysis detected significant quantities of BPA, TEGDMA, and other monomers in orthodontic adhesives used in daily practice: Transbond XT, Transbond Supreme LV (both, 3M Unitek, Monrovia, Calif), Blugloo (Ormco, Orange, Calif), and MonoLok 2 (Rocky Mountain Orthodontics, Denver, Colo).

CONCLUSIONS

Clinicians should consider that orthodontic adhesives contain BPA, an endocrine disruptor; TEGDMA, an allergic and a cytotoxic compound; and carcinogenic genotoxic compounds. These molecules are not mentioned in the material safety data sheets. Manufacturers should declare all components of dental composites to identify these substances that may result in allergic or undesirable side effects for patients and dental staff.

Cytotoxicity and cytokine expression induced by silorane and methacrylate-based composite resins

OBJECTIVE

The aim of this study was to evaluate cytotoxicity and cytokine production induced by light-cured or non-light-cured methacrylate-based and silorane composite resins in RAW 264.7 macrophages.

MATERIAL AND METHODS

Cells were stimulated with the extracts from light-cured or non-light-cured composite resins. After incubation for 24 h, cytotoxicity was assessed with the lactate dehydrogenase (LDH) and methyl thiazolyl tetrazolium (MTT) assays, and total protein was quantified using the Lowry method. TNF-α detection was examined with an enzyme-linked immunosorbent assay (ELISA) conducted with cell supernatants after cell stimulation for 6, 12, and 24 h. Data were analyzed using one-way analysis of variance (ANOVA) and Tukey's post hoc test (α=0.05).

RESULTS

KaloreTM and FiltekTM Silorane were cytotoxic with or without light curing (p<0.05) after 24 h of incubation. KaloreTM stimulated the early production of TNF-α in comparison with control (p<0.05), whereas FiltekTM Silorane did not affect TNF-α levels after 6 and 12 h (p>0.05). However, after 24 h FiltekTM Silorane inhibited the production of TNF-α (p<0.05).

CONCLUSIONS

KaloreTM and FiltekTM Silorane were cytotoxic regardless of light curing. The extract obtained from KaloreTM after 15 days of incubation stimulated the production of TNF-α, unlike that obtained from FiltekTM Silorane.

Estrogenic endocrine disruptors: Molecular mechanisms of action

A comprehensive summary of more than 450 estrogenic chemicals including estrogenic endocrine disruptors is provided here to understand the complex and profound impact of estrogen action. First, estrogenic chemicals are categorized by structure as well as their applications, usage and effects. Second, estrogenic signaling is examined by the molecular mechanism based on the receptors, signaling pathways, crosstalk/bypassing and autocrine/paracrine/homeostatic networks involved in the signaling. Third, evaluation of estrogen action is discussed by focusing on the technologies and protocols of the assays for assessing estrogenicity. Understanding the molecular mechanisms of estrogen action is important to assess the action of endocrine disruptors and will be used for risk management based on pathway-based toxicity testing.

Dental composite materials and renal function in children

OBJECTIVE

To examine whether greater exposure to resin-based composite materials, which may intra-orally release bisphenol A (BPA), is associated with worse renal function outcomes in children.

DESIGN

Prospective multi-centre study.

SETTING

Community health dental clinics in Boston and Maine from 1997-2005.Subjects and methods Five hundred and thirty-four New England Children's Amalgam Trial participants aged six to ten years were randomised to treatment with amalgam or resin-based composite restorations over five years of follow-up.

INTERVENTIONS

Restorations were placed according to treatment arm, and sealants placed per standard of care. Cumulative composite exposure was calculated using surface-years (each treated surface weighted by number years present).

MAIN OUTCOME MEASURES

Urinary excretion of albumin, gamma-glutamyl transpeptidase (gamma-GT), and N-acetyl-β-D-glucosaminidase (NAG) were available for 417 children.

RESULTS

Analysis of covariance showed no association between exposure to dental composites, polyacid-modified compomer, or flowable composite dental sealants and preventative resin restorations with levels of renal function. There was no association between composite materials and thresholds indicating renal damage in logistic regression models.

CONCLUSIONS

This study found no harmful associations between dental composite materials and renal function in children. Therefore, concerns about renal function need not be a consideration in the choice of dental restoration material or placement of preventative dental sealants.

Gene expression analysis of conventional and interactive human gingival cell systems exposed to dental composites

OBJECTIVES

The aim of this study was the detection of putative gene expression-related effects of dental composites in conventional and interactive gingival cell systems.

METHODS

Conventional monoculture (MC) and interactive cell systems (ICS) comprising human gingival fibroblast (HGF) and immortalized human gingival keratinocytes (IHGK) were exposed for 24h and 7 days according to ISO10993-12:2012 manufactured eluates of different composites (Ceram X(®), Filtek™ Supreme XT, Filtek™ Silorane, Fusio™ Liquid Dentin, and Vertise™ Flow). qRT-PCR-based mRNA analysis for biomarkers indicating cell proliferation, differentiation, apoptosis, inflammation, and adhesion was performed. Apoptotic cells were quantified by annexin-V labeling.

RESULTS

Due to low RNA amounts, qPCR could not be performed for Vertise™ Flow and Fusio™ Liquid Dentin at day 7. At 24h, flowables yielded increased transcription for biomarkers of inflammation and apoptosis in IHGK, irrespective of the cell system. HGF cultures displayed lower transcription for cell adhesion markers in both cell systems. Filtek™ Supreme XT showed increased differentiation by elevated filaggrin gene expression in both cell systems for IHGK at day 7, while Filtek™ Silorane and Ceram X(®) yielded elevation of inflammation biomarkers in both cell types. Annexin-V labeling revealed high apoptosis rates for both flowables and Filtek™ Supreme XT for IHGK, while low rates were detected for Filtek™ Silorane and Ceram X(®).

SIGNIFICANCE

Among the composites evaluated, exposition of IHGK and HGF in conventional and interactive cell systems demonstrated most pronounced gene expression alterations in response to flowables, coinciding with elevated levels of apoptosis.

Mapping the human toxome by systems toxicology

Toxicity testing typically involves studying adverse health outcomes in animals subjected to high doses of toxicants with subsequent extrapolation to expected human responses at lower doses. The low-throughput of current toxicity testing approaches (which are largely the same for industrial chemicals, pesticides and drugs) has led to a backlog of more than 80,000 chemicals to which human beings are potentially exposed whose potential toxicity remains largely unknown. Employing new testing strategies that employ the use of predictive, high-throughput cell-based assays (of human origin) to evaluate perturbations in key pathways, referred as pathways of toxicity, and to conduct targeted testing against those pathways, we can begin to greatly accelerate our ability to test the vast 'storehouses' of chemical compounds using a rational, risk-based approach to chemical prioritization and provide test results that are more predictive of human toxicity than current methods. The NIH Transformative Research Grant project Mapping the Human Toxome by Systems Toxicology aims at developing the tools for pathway mapping, annotation and validation as well as the respective knowledge base to share this information.

Effect of the environmental pollutant bisphenol A dimethacylate (BAD) on Ca2+ movement and viability in OC2 human oral cancer cells

The environmental pollutant bisphenol A dimethacylate (BAD) has been used as a dental composite. The effect of BAD on cytosolic Ca(2+) concentrations ([Ca(2+)]i) and viability in OC2 human oral cancer cells was explored. The Ca(2+)-sensitive fluorescent dye fura-2 was applied to measure [Ca(2+)]i. BAD induced [Ca(2+)]i rises in a concentration-dependent manner. The response was reduced by removing extracellular Ca(2+). BAD-evoked Ca(2+) entry was suppressed by nifedipine, econazole, and SK&F96365. In Ca(2+)-free medium, incubation with the endoplasmic reticulum Ca(2+) pump inhibitor thapsigargin abolished BAD-induced [Ca(2+)]i rise. Inhibition of phospholipase C with U73122 did not alter BAD-induced [Ca(2+)]i rise. At 10-30μM, BAD inhibited cell viability, which was not reversed by chelating cytosolic Ca(2+). BAD (20-30μM) also induced apoptosis. Collectively, in OC2 cells, BAD induced a [Ca(2+)]i rise by evoking phospholipase C-independent Ca(2+) release from the endoplasmic reticulum and Ca(2+) entry via store-operated Ca(2+) channels. BAD also caused apoptosis.

Effect-directed analysis of endocrine-disrupting compounds in multi-contaminated sediment: identification of novel ligands of estrogen and pregnane X receptors

Effect-directed analysis (EDA)-based strategies have been increasingly used in order to identify the causative link between adverse (eco-)toxic effects and chemical contaminants. In this study, we report the development and use of an EDA approach to identify endocrine-disrupting chemicals (EDCs) in a multi-contaminated river sediment. The battery of in vitro reporter cell-based bioassays, measuring estrogenic, (anti)androgenic, dioxin-like, and pregnane X receptor (PXR)-like activities, revealed multi-contamination profiles. To isolate active compounds of a wide polarity range, we established a multi-step fractionation procedure combining: (1) a primary fractionation step using normal phase-based solid-phase extraction (SPE), validated with a mixture of 12 non-polar to polar standard EDCs; (2) a secondary fractionation using reversed-phase-based high-performance liquid chromatography (RP-HPLC) calibrated with 33 standard EDCs; and (3) a purification step using a recombinant estrogen receptor (ER) affinity column. In vitro SPE and HPLC profiles revealed that ER and PXR activities were mainly due to polar to mid-polar compounds, while dioxin-like and anti-androgenic activities were in the less polar fractions. The overall procedure allowed final isolation and identification of new environmental PXR (e.g., di-iso-octylphthalate) and ER (e.g., 2,4-di-tert-butylphenol and 2,6-di-tert-butyl-α-methoxy-p-cresol) ligands by using gas chromatography coupled with mass spectrometry with full-scan mode acquisition in mid-polar fractions. In vitro biological activity of these chemicals was further confirmed using commercial standards, with di-iso-octylphthalate identified for the first time as a potent hPXR environmental agonist.

Detection and quantification of monomers in unstimulated whole saliva after treatment with resin-based composite fillings in vivo

Resin-based dental restorative materials contain allergenic methacrylate monomers, which may be released into saliva after restorative treatment. Monomers from resin-based composite materials have been demonstrated in saliva in vitro; however, studies analyzing saliva after restorative therapy are scarce. The aim of this study was to quantify methacrylate monomers in saliva after treatment with a resin-based composite filling material. Saliva was collected from 10 patients at four start points--before treatment, and 10 min, 24 h, and 7 d after treatment--and analysed by combined chromatography/mass spectrometry. The monomers bisphenol-A diglycidyl methacrylate (Bis-GMA), 2-hydroxyethyl methacrylate (HEMA), and urethane dimethacrylate (UDMA) were detected and quantified in the samples collected shortly (10 min) after treatment. The amounts detected ranged from 0.028 to 9.65 μg ml(-1) for Bis-GMA, from 0.015 to 0.19 μg ml(-1) for HEMA, and from 0.004 to 1.2 μg ml(-1) for UDMA. Triethyleneglycol dimethacrylate (TEGDMA) was detected in four of the samples. Ethoxylated bisphenol-A dimethacrylate (Bis-EMA) was not detected. Monomers were not detected in saliva samples collected before treatment, or 24 h or 7 d after treatment, with the exception of one sample, 24 h after treatment, in which HEMA was detected. In conclusion, monomers from the investigated resin-based composite and adhesive system were present in saliva shortly after treatment. One week after treatment, no monomers could be detected in patients' saliva samples.

Filtek™ Silorane and Filtek™ Supreme XT resins: tissue reaction after subcutaneous implantation in isogenic mice

The aim of this study was to evaluate the tissue compatibility of a silorane-based resin system (Filtek™ Silorane) and a methacrylate-based nanoparticle resin (Filtek™ Supreme XT) after implantation in the subcutaneous connective tissue of isogenic mice. One hundred and thirty five male isogenic BALB/c mice were randomly assigned to 12 experimental and 3 control groups, according to the implanted material and the experimental period of 7, 21 and 63 days. At the end of each period, the animals were killed and the tubes with the surrounding tissues were removed and processed for microscopic analysis. Samples were subjected to a descriptive and a semi-quantitative analyses using a 4-point scoring system (0-3) to evaluate the collagen fiber formation and inflammatory infiltrate. Data were statistically analyzed using the Kruskal Wallis test (α=0.05). The results showed that there was no significant difference between the experimental and control groups considering the three evaluation periods (p>0.05). The silorane-based and the methacrylate-based nanoparticle resins presented similar tissue response to that of the empty tube (control group) after subcutaneous implantation in isogenic mice.

Changes in pituitary and prolactin cells of Wistar rats after two dental fillings with bisphenolic resins

Bisphenol-A (BPA) is used to manufacture dental materials such as sealants, fillings and cements. There is evidence of its estrogenic effects on recipients after the placement of dental sealants. Pituitary and especially prolactin (PRL) cells are targets for estrogens.

OBJECTIVES

The aim of this research was to determine if BPA eluted from dental resins can alter the proliferation of pituitary cells and PRL cells in the short, medium and long term in a case-control assay.

METHODS

Two dental fillings were inserted in the lower incisors of Wistar rats divided into groups sacrificed after one, three, five and seven months. Immunocytochemical treatment was carried out in order to determine proliferating cell nuclear antigen (PCNA) positive cells, PRL-positive cells, PRL- and PCNA-positive cells.

RESULTS

A significant increase of PCNA-positive cells after one (p < 0.05), three (p < 0.01) and five months (p < 0.01) was recorded. PRL-positive cells showed no statistically significant difference between intervened animals and controls. PRL- and PCNA-positive cells manifested a significant increase after five months (p < 0.05). A significant decrease in proliferating cells was observed after seven months (p < 0.05) for PCNA-positive cells and (p < 0.01) for PRL- and PCNA-positive cells.

CONCLUSION

Low quantities of BPA eluted during mastication can affect immunocytochemical patterns of pituitary cells, increasing cellular proliferation in the short, medium and long term although PRL cell population remained unaffected after dental fillings.

Bisphenol A-glycidyl methacrylate induces a broad spectrum of DNA damage in human lymphocytes

Bisphenol A-glycidyl methacrylate (BisGMA) is monomer of dental filling composites, which can be released from these materials and cause adverse biologic effects in human cells. In the present work, we investigated genotoxic effect of BisGMA on human lymphocytes and human acute lymphoblastic leukemia cell line (CCRF-CEM) cells. Our results indicate that BisGMA is genotoxic for human lymphocytes. The compound induced DNA damage evaluated by the alkaline, neutral, and pH 12.1 version of the comet assay. This damage included oxidative modifications of the DNA bases, as checked by DNA repair enzymes EndoIII and Fpg, alkali-labile sites and DNA double-strand breaks. BisGMA induced DNA-strand breaks in the isolated plasmid. Lymphocytes incubated with BisGMA at 1 mM were able to remove about 50% of DNA damage during 120-min repair incubation. The monomer at 1 mM evoked a delay of the cell cycle in the S phase in CCRF-CEM cells. The experiment with spin trap—DMPO demonstrated that BisGMA induced reactive oxygen species, which were able to damage DNA. BisGMA is able to induce a broad spectrum of DNA damage including severe DNA double-strand breaks, which can be responsible for a delay of the cell cycle in the S phase.

Cytotoxicity and degree of conversion of orthodontic adhesives

OBJECTIVES

To test the hypothesis that there is no difference in the cytotoxicity related to the modes of polymerization of five commercially available orthodontic bonding resins, with and without an oxygen-inhibited layer (OIL), and to evaluate the degree of conversion (DC) of these resins and correlate this to cytotoxicity.

MATERIALS AND METHODS

Five commercially available orthodontic bonding resins were tested for cytotoxicity and DC. Thirty-six disks of standardized dimensions, for each resin, were used for cytotoxicity assessment. Half of them were washed with 99% acetone to remove the OIL (washed resins), and the remaining disks were left intact (intact resins). Glass disks were used as a control. Vero cells were exposed to intact and washed resins on day 1. Cell viability was determined by tetrazolium bromide reduction assay 1, 3, and 6 days after exposure. The DC of the adhesive specimens of each resin, prepared with a procedure identical to the clinical bonding process, was assessed by Fourier transform infrared spectroscopy.

RESULTS

Single-cured systems were comparatively less cytotoxic than dual-cured systems. With removal of the OIL, increased cell viability was noted only with two resins on all three days. Resins tested showed differences in DC. A positive correlation was demonstrated by two resins.

CONCLUSION

The hypothesis is rejected. Single-cured systems are superior to dual-cured systems in exhibiting comparatively less toxicity and higher DC. A significant positive correlation was not established between cytotoxicity and DC.

Molecular toxicology of substances released from resin-based dental restorative materials

Resin-based dental restorative materials are extensively used today in dentistry. However, significant concerns still remain regarding their biocompatibility. For this reason, significant scientific effort has been focused on the determination of the molecular toxicology of substances released by these biomaterials, using several tools for risk assessment, including exposure assessment, hazard identification and dose-response analysis. These studies have shown that substances released by these materials can cause significant cytotoxic and genotoxic effects, leading to irreversible disturbance of basic cellular functions. The aim of this article is to review current knowledge related to dental composites' molecular toxicology and to give implications for possible improvements concerning their biocompatibility.

Quantification of chemical-polymer surface interactions in microfluidic cell culture devices

Microfluidic cell culture devices have been used for drug development, chemical analysis, and environmental pollutant detection. Because of the decreased fluid volume and increased surface area to volume ratio, interactions between device surfaces and the fluid is a key element that affects the performance and detection accuracy of microfluidic devices, particularly if fluid is recirculated by a peristaltic pump. However, this issue has not been studied in detail in a microfluidic cell culture environment. In this study, chemical loss and contaminant leakage from various polymer surfaces in a microfluidic setup were characterized. The effects of hydrophilic coating with Poly (vinyl alcohol), Pluronic(R) F-68, and multi-layer ionic coating were measured. We observed significant surface adsorption of estradiol, doxorubicin, and verapamil with PharMed BPT tubing, whereas PTFE/BPT and stainless steel/BPT hybrid tubing caused less chemical loss in proportion to the fraction of BPT tubing in the hybrid system. Contaminants leaching out of the BPT tubing were found to be estrogen receptor agonists as determined by estrogen-induced green fluorescence expression in an estrogen responsive Ishikawa cell line and also caused interference with an estradiol enzyme-linked immunosorbent assay (ELISA) assay. Stainless steel/BPT hybrid tubing caused the least interference with ELISA. In summary, polymer surface and chemical interactions inside microfluidic systems should not be neglected and require careful investigations when results from a microfluidic system are compared with results from a macroscale cell culture setup.

Biocompatibility of Resin-based Dental Materials

Oral and mucosal adverse reactions to resin-based dental materials have been reported. Numerous studies have examined the biocompatibility of restorative dental materials and their components, and a wide range of test systems for the evaluation of the biological effects of these materials have been developed. This article reviews the biological aspects of resin-based dental materials and discusses the conventional as well as the new techniques used for biocompatibility assessment of dental materials.

Cytotoxicity and genotoxicity of glycidyl methacrylate

Methacrylates are used in the polymer form as composite restorative materials in dentistry. However, the polymers can release monomers and co-monomers into the oral cavity and pulp, from where they can migrate into the bloodstream reaching virtually all organs. The local concentration of the released monomers can be in the millimolar range, high enough to induce adverse biological effects. Genotoxicity of methacrylate monomers is of a special significance due to potential serious phenotypic consequences, including cancer, and long latency period. In the present work, we investigated cytotoxicity and genotoxicity of glycidyl methacrylate (GMA) in the human peripheral blood lymphocytes and the CCR-CM human cancer cells. GMA at concentrations up to 5mM evoked a concentration-dependent decrease in the viability of the lymphocytes up to about 80%, as assessed by flow cytometry. This agent did not induce strand breaks in the isolated plasmid DNA, but evoked concentration-dependent DNA damage in the human lymphocytes evaluated by the alkaline and neutral comet assay. This damage included oxidative modifications to the DNA bases, as checked by DNA repair enzymes Endo III and Fpg as well as single and double DNA strand breaks. The lymphocytes exposed to GMA at 2.5 microM were able to remove about 90% of damage to their DNA in 120 min. The ability of GMA to induce DNA double-strand breaks was confirmed by pulsed field gel electrophoresis. The drug evoked apoptosis and induced an increase in the G2/M cell population, accompanied by a decrease in the S cell population and an increase in G0/G1 cell population. Due to broad spectrum of GMA genotoxicity, including DNA double-strand breaks, and a potential long-lasting exposure to this compound, its use should be accompanied by precautions, reducing the chance of its release into blood stream and the possibility to induce adverse biological effects.

Human exposure to bisphenol A (BPA)

The plastic monomer and plasticizer bisphenol A (BPA) is one of the highest volume chemicals produced worldwide. BPA is used in the production of polycarbonate plastics and epoxy resins used in many consumer products. Here, we have outlined studies that address the levels of BPA in human tissues and fluids. We have reviewed the few epidemiological studies available that explore biological markers of BPA exposure and human health outcomes. We have examined several studies of levels of BPA released from consumer products as well as the levels measured in wastewater, drinking water, air and dust. Lastly, we have reviewed acute metabolic studies and the information available about BPA metabolism in animal models. The reported levels of BPA in human fluids are higher than the BPA concentrations reported to stimulate molecular endpoints in vitro and appear to be within an order of magnitude of the levels needed to induce effects in animal models.

In vitro cytotoxicity of dental composites based on new and traditional polymerization chemistries

The biological response to dental restorative polymer composites is mediated by the release of unpolymerized residual monomers. Several new composite formulations claim to reduce unpolymerized residual mass. The current study assessed the cytotoxic responses to several of these new formations and compared them with more traditional formulations. Our hypothesis predicted that if these new polymerization chemistries reduce unpolymerized residual mass, the cytotoxicity of these materials also should be reduced relative to traditional formulations.

METHODS

Materials (HerculiteXRV, Premise, Filtek Supreme, CeramxDuo, Hermes, and Quixfil) were tested in vitro in direct contact with Balb mouse fibroblasts, initially, then after aging in artificial saliva for 0, 1, 3, 5, or 8 weeks. The toxicity was determined by using the MTT assay to the estimate SDH activity. Knoop hardness of the materials also was measured at 0 and 8 weeks to determine whether surface breakdown of the materials in artificial saliva contributed to cytotoxic responses.

RESULTS

Materials with traditional methacrylate chemistries (Herculite, Premise, Filtek Supreme) were severely (>50%) cytotoxic throughout the 8-week interval, but materials with newer chemistries or filling strategies (Hermes, CeramXDuo, and Quixfil) improved over time of aging in artificial saliva. Hermes showed the least cytotoxicity at 8 weeks, and was statistically equivalent to Teflon negative controls. Hardness of the materials was unaffected by exposure to artificial saliva.

CONCLUSIONS

Newer polymerization and filling strategies for dental composites show promise for reducing the release of unpolymerized components and cytotoxicity.

The safety of dental amalgam in children

The safety of mercury-containing dental amalgam has been hotly debated for well over a century. Dental exposures from mercury have been suggested as the cause of numerous diseases including multiple sclerosis, autism and many others. Known health effects of mercury exposure include CNS and renal damage. However, these effects have only been shown at occupational or higher levels of exposure, and have not been conclusively shown to be present at levels of mercury exposure consistent with that from dental amalgam fillings. The use of mercury amalgam fillings remains a state-of-the-art treatment for dental caries throughout the world. Although there have been a small number of peer-reviewed reports examining the health effects of dental mercury in children, only very recently have the only randomised, controlled clinical trials (two) of the safety of mercury amalgam been published. The purpose of this review is to discuss the scientific evidence on the safety of the use of mercury-containing dental amalgam as a treatment for dental caries.

Genetic and cellular toxicology of dental resin monomers

Monomers are released from dental resin materials, and thus cause adverse biological effects in mammalian cells. Cytotoxicity and genotoxicity of some of these methacrylates have been identified in a vast number of investigations during the last decade. It has been well-established that the co-monomer triethylene glycol dimethacrylate (TEGDMA) causes gene mutations in vitro. The formation of micronuclei is indicative of chromosomal damage and the induction of DNA strand breaks detected with monomers like TEGDMA and 2-hydroxyethyl methacrylate (HEMA). As a consequence of DNA damage, the mammalian cell cycle was delayed in both G1 and G2/M phases, depending on the concentrations of the monomers. Yet, the mechanisms underlying the genetic and cellular toxicology of resin monomers have remained obscure until recently. New findings indicate that increased oxidative stress results in an impairment of the cellular pro- and anti-oxidant redox balance caused by monomers. It has been demonstrated that monomers reduced the levels of the natural radical scavenger glutathione (GSH), which protects cell structures from damage caused by reactive oxygen species (ROS). Depletion of the intracellular GSH pool may then significantly contribute to cytotoxicity, because a related increase in ROS levels can activate pathways leading to apoptosis. Complementary, cytotoxic, and genotoxic effects of TEGDMA and HEMA are inhibited in the presence of ROS scavengers like N-acetylcysteine (NAC), ascorbate, and Trolox (vitamin E). Elevated intracellular levels of ROS can also activate a complex network of redox-responsive macromolecules, including redox-sensitive transcription factors like nuclear factor kappaB (NF-kappaB). It has been shown that NF-kappaB is activated probably to counteract HEMA-induced apoptosis. The induction of apoptosis by TEGDMA in human pulp cells has been associated with an inhibition of the phosphatidylinositol 3-kinase (PI3-K) cell-survival signaling pathway. Although the details of the mechanisms leading to cell death, genotoxicity, and cell-cycle delay are not completely understood, resin monomers may be able to alter the functions of the cells of the oral cavity. Pathways regulating cellular homeostasis, dentinogenesis, or tissue repair may be modified by monomers at concentrations well below those which cause acute cytotoxicity.