Amelogenin-guided Crystal Growth on Fluoroapatite Glass-ceramics

The power of weak ion-exchange resins assisted by amelogenin for natural remineralization of dental enamel: an in vitro study

This study aims to develop an innovative dental product to remineralize dental enamel by a proper combination of ion-exchange resins as controlled release of mineral ions that form dental enamel, in the presence of amelogenin to guide the appropriate crystal growth. The novel product proposed consists of a combination of ion-exchange resins (weak acid and weak base) individually loaded with the remineralizing ions: Ca²⁺, PO₄^3- and F^-, also including Zn²⁺ in a minor amount as antibacterial, together with the protein amelogenin. Such cocktail provides onsite controlled release of the ions necessary for enamel remineralization due to the weak character of the resins and at the same time, a guiding tool for related crystal growth by the indicated protein. Amelogenin protein is involved in the structural development of natural enamel and takes a key role in controlling the crystal growth morphology and alignment at the enamel surface. Bovine teeth were treated by applying the resins and protein together with artificial saliva. Treated teeth were evaluated with nanoindentation, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The innovative material induces the dental remineralization creating a fluorapatite layer with a hardness equivalent to sound enamel, with the appropriate alignment of corresponding nanocrystals, being the fluorapatite more acid resistant than the original mineral. Our results suggest that the new product shows potential for promoting long-term remineralization leading to the inhibition of caries and protection of dental structures.

Advances in biomineralization-inspired materials for hard tissue repair

Biomineralization is the process by which organisms form mineralized tissues with hierarchical structures and excellent properties, including the bones and teeth in vertebrates. The underlying mechanisms and pathways of biomineralization provide inspiration for designing and constructing materials to repair hard tissues. In particular, the formation processes of minerals can be partly replicated by utilizing bioinspired artificial materials to mimic the functions of biomolecules or stabilize intermediate mineral phases involved in biomineralization. Here, we review recent advances in biomineralization-inspired materials developed for hard tissue repair. Biomineralization-inspired materials are categorized into different types based on their specific applications, which include bone repair, dentin remineralization, and enamel remineralization. Finally, the advantages and limitations of these materials are summarized, and several perspectives on future directions are discussed.

A Review of the Role of Amelogenin Protein in Enamel Formation and Novel Experimental Techniques to Study its Function

:

Amelognein protein plays a vital role in the formation and mineralization of enamel matrix. Amelogenin structure is complex in nature and researchers have studied it with different experimental techniques. Considering its important role, there is a need to understand this important protein, which has been discussed in detail in this review. In addition, various experimental techniques to study amelogenin protein used previously have been tackled along with their advantages and disadvantages. A selection of 67 relevant articles/book chapters was included in this study. The review concluded that amelogenins act as nanospheres or spacers for the growth of enamel crystals. Various experimental techniques can be used to study amelogenins, however, their advantages and drawbacks should be kept in mind before performing analysis.

Role of Macromolecular Assembly of Enamel Matrix Proteins in Enamel Formation

Unlike other mineralized tissues, mature dental enamel is primarily (> 95% by weight) composed of apatitic crystals and has a unique hierarchical structure. Due to its high mineral content and organized structure, enamel has exceptional functional properties and is the hardest substance in the human body. Enamel formation (amelogenesis) is the result of highly orchestrated extracellular processes that regulate the nucleation, growth, and organization of forming mineral crystals. However, major aspects of the mechanism of enamel formation are not well-understood, although substantial evidence suggests that protein-protein and protein-mineral interactions play crucial roles in this process. The purpose of this review is a critical evaluation of the present state of knowledge regarding the potential role of the assembly of enamel matrix proteins in the regulation of crystal growth and the structural organization of the resulting enamel tissue. This review primarily focuses on the structure and function of amelogenin, the predominant enamel matrix protein. This review also provides a brief description of novel in vitro approaches that have used synthetic macromolecules ( i.e., surfactants and polymers) to regulate the formation of hierarchical inorganic (composite) structures in a fashion analogous to that believed to take place in biological systems, such as enamel. Accordingly, this review illustrates the potential for developing bio-inspired approaches to mineralized tissue repair and regeneration. In conclusion, the authors present a hypothesis, based on the evidence presented, that the full-length amelogenin uniquely regulates proper enamel formation through a process of cooperative mineralization, and not as a pre-formed matrix.

Amelogenin in Enamel Tissue Engineering

In this chapter the basic premises, the recent findings and the future challenges in the use of amelogenin for enamel tissue engineering are being discoursed on. Results emerging from the experiments performed to assess the fundamental physicochemical mechanisms of the interaction of amelogenin, the main protein of the enamel matrix, and the growing crystals of apatite, are mentioned, alongside a moderately comprehensive literature review of the subject at hand. The clinical importance of understanding this protein/mineral interaction at the nanoscale are highlighted as well as the potential for tooth enamel to act as an excellent model system for studying some of the essential aspects of biomineralization processes in general. The dominant paradigm stating that amelogenin directs the uniaxial growth of apatite crystals in enamel by slowing down the growth of (hk0) faces on which it adheres is being questioned based on the results demonstrating the ability of amelogenin to promote the nucleation and crystal growth of apatite under constant titration conditions designed to mimic those present in the developing enamel matrix. The role of numerous minor components of the enamel matrix is being highlighted as essential and impossible to compensate for by utilizing its more abundant ingredients only. It is concluded that the three major aspects of amelogenesis outlined hereby--(1) the assembly of amelogenin and other enamel matrix proteins, (2) the proteolytic activity, and (3) crystallization--need to be in precise synergy with each other in order for the grounds for the proper imitation of amelogenesis in the lab to be created.

EBSD-measurements of textured apatite glass-ceramics

A partially crystallized glass melt is extruded to align the apatite crystals. An orientation dependent EBSD-pattern acquisition is observed, making texture analysis problematic.

Enamel prism-like tissue regeneration using enamel matrix derivative

BACKGROUNDS

Enamel matrix derivative (EMD) has been shown to promote periodontal regeneration, but its effect on biomimetic mineralisation of enamel is not reported.

OBJECTIVES

This in vitro study aimed to investigate the effect of commercially available EMD on promoting biomimetic mineralisation in demineralised enamel using an agarose hydrogel model.

METHODS

Human enamel slices were demineralised with 37% phosphoric acid for 1 min. They were covered with a 2-mm-thick EMD-calcium chloride (CaCl2) agarose hydrogel. Another 2-mm-thick ion-free agarose hydrogel was added on top of the EMD-CaCl2 hydrogel. They were incubated in a phosphate solution containing fluoride at 37°C for 96 h. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) were used to evaluate the crystals formed on the demineralised enamel surface. A nano-indenter was used to evaluate the elastic modulus and nanohardness on the surface of the enamel slices.

RESULTS

SEM observed enamel prism-like crystals formed on the enamel. They had typical apatite hexagonal structures, which corroborated the enamel's microstructure. EDX revealed that the elements were predominantly calcium, phosphorus, and fluorine. XRD confirmed that they were fluorinated hydroxyapatite. The mean elastic modulus before and after remineralisation was 59.1GPa and 78.5GPa (p<0.001), respectively; the mean nanohardness was 1.1GPa and 2.2GPa, respectively (p<0.001).

CONCLUSIONS

EMD promoted in vitro biomimetic mineralisation and facilitated enamel prism-like tissue formation on demineralised human enamel.

CLINICAL SIGNIFICANCE

This study is the first to report on using EMD in biomimetic mineralisation, which may serve as a biomaterial for enamel repair.

Quantitatively and kinetically identifying binding motifs of amelogenin proteins to mineral crystals through biochemical and spectroscopic assays

Tooth enamel is the hardest tissue in vertebrate animals. Consisting of millions of carbonated hydroxyapatite crystals, this highly mineralized tissue develops from a protein matrix in which amelogenin is the predominant component. The enamel matrix proteins are eventually and completely degraded and removed by proteinases to form mineral-enriched tooth enamel. Identification of the apatite-binding motifs in amelogenin is critical for understanding the amelogenin-crystal interactions and amelogenin-proteinases interactions during tooth enamel biomineralization. A stepwise strategy is introduced to kinetically and quantitatively identify the crystal-binding motifs in amelogenin, including a peptide screening assay, a competitive adsorption assay, and a kinetic-binding assay using amelogenin and gene-engineered amelogenin mutants. A modified enzyme-linked immunosorbent assay on crystal surfaces is also applied to compare binding amounts of amelogenin and its mutants on different planes of apatite crystals. We describe the detailed protocols for these assays and provide the considerations for these experiments in this chapter.

Self-assembly of filamentous amelogenin requires calcium and phosphate: from dimers via nanoribbons to fibrils

Enamel matrix self-assembly has long been suggested as the driving force behind aligned nanofibrous hydroxyapatite formation. We tested if amelogenin, the main enamel matrix protein, can self-assemble into ribbon-like structures in physiologic solutions. Ribbons 17 nm wide were observed to grow several micrometers in length, requiring calcium, phosphate, and pH 4.0-6.0. The pH range suggests that the formation of ion bridges through protonated histidine residues is essential to self-assembly, supported by a statistical analysis of 212 phosphate-binding proteins predicting 12 phosphate-binding histidines. Thermophoretic analysis verified the importance of calcium and phosphate in self-assembly. X-ray scattering characterized amelogenin dimers with dimensions fitting the cross-section of the amelogenin ribbon, leading to the hypothesis that antiparallel dimers are the building blocks of the ribbons. Over 5-7 days, ribbons self-organized into bundles composed of aligned ribbons mimicking the structure of enamel crystallites in enamel rods. These observations confirm reports of filamentous organic components in developing enamel and provide a new model for matrix-templated enamel mineralization.

Self-assembly of amelogenin proteins at the water-oil interface

Self-assembly of amelogenin plays a key role in controlling enamel biomineralization. Recently, we generated self-aligning nanoribbons of amelogenin in water-in-oil emulsions stabilized by the full-length protein (rH174). Here, we tested the hypothesis that the hydrophilic C-terminus is critical for self-assembly of amelogenin into nanoribbons. The self-assembled structures of two amelogenin cleavage products, rH163 and rH146, were compared with structures of rH174 at different pH values and degrees of saturation using atomic force microscopy, electron microscopy, and dynamic light scattering. We observed that the number density of rH174 nanoribbons increased significantly when the initial pH was raised from 4.5 to 5.6. Nanoribbons, as well as unique helical nanostructures, were also readily observed when amelogenin rH146 was used, but showed little tendency for parallel alignment and did not bundle into fibrils like rH174. In contrast, rH163 rarely formed nanoribbons but predominantly assembled into nanospheres under the same conditions. We conclude that the presence of a hydrophilic C-terminus may not be a prerequisite for nanoribbon formation but may be critical for ribbon alignment and subsequent fibril formation. These results highlight the contribution of the hydrophobic domain in the self-assembly of elongated structures of amelogenins. Molecular mechanisms governing these processes based on the formation of reverse micelles are discussed.

Protein-mediated enamel mineralization

Enamel is a hard nanocomposite bioceramic with significant resilience that protects the mammalian tooth from external physical and chemical damages. The remarkable mechanical properties of enamel are associated with its hierarchical structural organization and its thorough connection with underlying dentin. This dynamic mineralizing system offers scientists a wealth of information that allows the study of basic principels of organic matrix-mediated biomineralization and can potentially be utilized in the fields of material science and engineering for development and design of biomimetic materials. This chapter will provide a brief overview of enamel hierarchical structure and properties and the process and stages of amelogenesis. Particular emphasis is given to current knowledge of extracellular matrix protein and proteinases, and the structural chemistry of the matrix components and their putative functions. The chapter will conclude by discussing the potential of enamel for regrowth.

Hydrolysis of amelogenin by matrix metalloprotease-20 accelerates mineralization in vitro

In the following respects, tooth enamel is a unique tissue in the mammalian body: (a) it is the most mineralized and hardest tissue in it comprising up to 95 wt% of apatite; (b) its microstructure is dominated by parallel rods composed of bundles of 40-60 nm wide apatite crystals with aspect ratios reaching up to 1:10,000 and (c) not only does the protein matrix that gives rise to enamel guides the crystal growth, but it also conducts its own degradation and removal in parallel. Hence, when mimicking the process of amelogenesis in vitro, crystal growth has to be coupled to proteolytic digestion of the amelogenin assemblies that are known to play a pivotal role in conducting the proper crystal growth. Experimental settings based on controlled and programmable titration of amelogenin sols digested by means of MMP-20 with buffered calcium and phosphate solutions were employed to imitate the formation of elongated, plate-shaped crystals. Whilst amelogenin can act as a promoter of nucleation and crystal growth alone, in this study we show that proteolysis exerts an additional nucleation- and growth-promoting effect. Hydrolysis of full-length amelogenin by MMP-20 decreases the critical time needed for the protein and peptides to adhere and to cover the substrate. The formation and immobilization of a protein layer subsequently reduces the time for calcium phosphate crystallization. Coupling the proteolytic reaction to titration in the presence of 0.4 mg/ml rH174 has been shown to have the same effect on the crystal growth promotion as quadrupling the concentration of rH174 to 1.6 mg/ml. Controlling the rate and the extent of the proteolytic cleavage can thus be used to control the nucleation and growth rates in a protein-guided crystallization system.

Altered self-assembly and apatite binding of amelogenin induced by N-terminal proline mutation

OBJECTIVE

A single Pro-70 to Thr (p.P70T) mutation of amelogenin is known to result in hypomineralised amelogenesis imperfecta (AI). This study aims to test the hypothesis that the given mutation affects the self-assembly of amelogenin molecules and impairs their ability to conduct the growth of apatite crystals.

DESIGN

Recombinant human full-length wild-type (rh174) and p.P70T mutated amelogenins were analysed using dynamic light scattering (DLS), protein quantification assay and atomic force microscopy (AFM) before and after the binding of amelogenins to hydroxyapatite crystals. The crystal growth modulated by both amelogenins in a dynamic titration system was observed using AFM.

RESULTS

As compared to rh174 amelogenin, p.P70T mutant displayed significantly increased sizes of the assemblies, higher binding affinity to apatite, and decreased crystal height.

CONCLUSION

Pro-70 plays an important structural role in the biologically relevant amelogenin self-assembly. The disturbed regularity of amelogenin nanospheres by this single mutation resulted in an increased binding to apatite and inhibited crystal growth.

Biomimetic Precipitation of Uniaxially Grown Calcium Phosphate Crystals from Full-Length Human Amelogenin Sols

Human dental enamel forms over a period of 2 - 4 years by substituting the enamel matrix, a protein gel mostly composed of a single protein, amelogenin with fibrous apatite nanocrystals. Self-assembly of a dense amelogenin matrix is presumed to direct the growth of apatite fibers and their organization into bundles that eventually comprise the mature enamel, the hardest tissue in the mammalian body. This work aims to establish the physicochemical and biochemical conditions for the synthesis of fibrous apatite crystals under the control of a recombinant full-length human amelogenin matrix in combination with a programmable titration system. The growth of apatite substrates was initiated from supersaturated calcium phosphate solutions in the presence of dispersed amelogenin assemblies. It was shown earlier and confirmed in this study that binding of amelogenin onto apatite surfaces presents the first step that leads to substrate-specific crystal growth. In this work, we report enhanced nucleation and growth under conditions at which amelogenin and apatite carry opposite charges and adsorption of the protein onto the apatite seeds is even more favored. Experiments at pH below the isoelectric point of amelogenin showed increased protein binding to apatite and at low Ca/P molar ratios resulted in a change in crystal morphology from plate-like to fibrous and rod-shaped. Concentrations of calcium and phosphate ions in the supernatant did not show drastic decreases throughout the titration period, indicating controlled precipitation from the protein suspension metastable with respect to calcium phosphate. It is argued that ameloblasts in the developing enamel may vary the density of the protein matrix at the nano scale by varying local pH, and thus control the interaction between the mineral and protein phases. The biomimetic experimental setting applied in this study has thus proven as convenient for gaining insight into the fundamental nature of the process of amelogenesis.

Amelogenin as a Promoter of Nucleation and Crystal Growth of Apatite

Human dental enamel forms over a period of 2 - 4 years by substituting the enamel matrix, a protein gel mostly composed of a single protein, amelogenin with fibrous apatite nanocrystals. Self-assembly of amelogenin and the products of its selective proteolytic digestion are presumed to direct the growth of apatite fibers and their organization into bundles that eventually comprise the mature enamel, the hardest tissue in the mammalian body. This work aimed to establish the physicochemical and biochemical conditions for the growth of apatite crystals under the control of a recombinant amelogenin matrix (rH174) in combination with a programmable titration system. The growth of apatite substrates was initiated in the presence of self-assembling amelogenin particles. A series of constant titration rate experiments was performed that allowed for a gradual increase of the calcium and/or phosphate concentrations in the protein suspensions. We observed a significant amount of apatite crystals formed on the substrates following the titration of rH174 sols that comprised the initial supersaturation ratio equal to zero. The protein layers adsorbed onto the substrate apatite crystals were shown to act as promoters of nucleation and growth of calcium phosphates subsequently grown on the substrate surface. Nucleation lag time experiments have showed that rH174 tends to accelerate precipitation from metastable calcium phosphate solutions in proportion to its concentration. Despite their mainly hydrophobic nature, amelogenin nanospheres, the size and surface charge properties of which were analyzed using dynamic light scattering, acted as a nucleating agent for the crystallization of apatite. The biomimetic experimental setting applied in this study proves as convenient for gaining insight into the fundamental nature of the process of amelogenesis.

Self-aligning amelogenin nanoribbons in oil-water system

The highly organized microstructure of dental enamel is a result of protein-guided anisotropic growth of apatite nanofibers. It is established that amelogenin proteins, the main constituent of the developing enamel matrix, form nanospheres in vitro, but the amphiphilic nature of the full-length protein conveys the possibility of generating more complex structures as observed with other surfactant-like molecules. This study tested if the use of metastable oil-water emulsions can induce supramolecular assemblies of amelogenin. Recombinant full-length amelogenin, rH174, was mixed into octanol/ethyl acetate preparations of different ratios to form emulsions at pH 4.5 and 7.4. Atomic force and electron microscopy showed the formation of 16.7±1.0nm wide nanoribbons which grew to several micrometer length over a period of days. Nanoribbons formed from reverse micelles by enabling hydrophobic tails of the molecules to interact while preventing the formation of amelogenin nanospheres. Ribbon formation required the presence of calcium and phosphate ions and may be localized at a dark central line along the amelogenin ribbons. The ribbons have a strong tendency to align in parallel maintaining 5-20nm space between each other. The growth rates and number of ribbons were significantly higher at pH 4.5 and related to the metastability of the emulsion. A model for ribbon extension proposes the addition of short segments or amelogenin dimers to the ends of the ribbon. The formation of self-aligning and uniaxially elongating amelogenin structures triggered by the presence of calcium and phosphate may represent a suitable new model for protein controlled mineralization in enamel.

Effects of phosphorylation on the self-assembly of native full-length porcine amelogenin and its regulation of calcium phosphate formation in vitro

The self-assembly of the predominant extracellular enamel matrix protein amelogenin plays an essential role in regulating the growth and organization of enamel mineral during early stages of dental enamel formation. The present study describes the effect of the phosphorylation of a single site on the full-length native porcine amelogenin P173 on self-assembly and on the regulation of spontaneous calcium phosphate formation in vitro. Studies were also conducted using recombinant non-phosphorylated (rP172) porcine amelogenin, along with the most abundant amelogenin cleavage product (P148) and its recombinant form (rP147). Amelogenin self-assembly was assessed using dynamic light scattering (DLS) and transmission electron microscopy (TEM). Using these approaches, we have shown that self-assembly of each amelogenin is very sensitive to pH and appears to be affected by both hydrophilic and hydrophobic interactions. Furthermore, our results suggest that the phosphorylation of the full-length porcine amelogenin P173 has a small but potentially important effect on its higher-order self-assembly into chain-like structures under physiological conditions of pH, temperature, and ionic strength. Although phosphorylation has a subtle effect on the higher-order assembly of full-length amelogenin, native phosphorylated P173 was found to stabilize amorphous calcium phosphate for extended periods of time, in sharp contrast to previous findings using non-phosphorylated rP172. The biological relevance of these findings is discussed.

Prospects and Pits on the Path of Biomimetics: The case of tooth enamel

This review presents a discourse on challenges in understanding and imitating the process of amelogenesis in vitro on the molecular scale. In light of the analysis of imitation of the growth of dental enamel, it also impends on the prospects and potential drawbacks of the biomimetic approach in general. As the formation of enamel proceeds with the protein matrix guiding the crystal growth, while at the same time conducting its own degradation and removal, it is argued that three aspects of amelogenesis need to be induced in parallel: a) crystal growth; b) protein assembly; c) proteolytic degradation. A particular emphasis is therefore placed on ensuring conditions for proteolysis-coupled protein-guided crystallization to occur. Discussed are structural and functional properties of the protein species involved in amelogenesis, mainly amelogenin and enamelysin, the main protein and the protease of the developing enamel matrix, respectively. A model of enamel growth based on controlled delivery of constituent ions or crystalline or amorphous building blocks by means of amelogenin is proposed. The importance of high viscosity of the enamel matrix and a more intricate role that water may play in such a gelatinous medium are also touched upon. The tendency of amelogenin to self-assemble into fibrous and rod-shaped morphologies is considered as potentially important in explaining the formation of elongated apatite crystals. The idea that a preassembling protein matrix serves as a template for the uniaxial growth of apatite crystals in enamel is finally challenged with the one based on co-assembly of the protein and the mineral phases.

Amelogenin nanoparticles in suspension: deviations from spherical shape and pH-dependent aggregation

It is well-known that amelogenin self-assembles to form nanoparticles, usually referred to as amelogenin nanospheres, despite the fact that not much is known about their actual shape in solution. In the current paper, we combine SAXS and DLS to study the three-dimensional shape of the recombinant amelogenins rP172 and rM179. Our results show for the first time that amelogenins build oblate nanoparticles in suspension using experimental approaches that do not require the proteins to be in contact with a support material surface. The SAXS studies give evidence for the existence of isolated amelogenin nano-oblates with aspect ratios in the range of 0.45-0.5 at pH values higher than pH 7.2 and show an aggregation of these nano-oblates at lower pH values. The role of the observed oblate shape in the formation of chain-like structures at physiological conditions is discussed as a key factor in the biomineralization of dental enamel.

A solution NMR investigation into the murine amelogenin splice-variant LRAP (Leucine-Rich Amelogenin Protein)

Amelogenins are the dominant proteins present in ameloblasts during the early stages of enamel biomineralization, making up >90% of the matrix protein. Along with the full-length protein there are several splice-variant isoforms of amelogenin present including LRAP (Leucine-Rich Amelogenin Protein), a protein that consists of the first 33 and the last 26 residues of full-length amelogenin. Using solution-state NMR spectroscopy we have assigned the (1)H-(15)N HSQC spectrum of murine LRAP (rp(H)LRAP) in 2% acetic acid at pH 3.0 by making extensive use of previous chemical shift assignments for full-length murine amelogenin (rp(H)M180). This correlation was possible because LRAP, like the full-length protein, is intrinsically disordered under these solution conditions. The major difference between the (1)H-(15)N HSQC spectra of rp(H)M180 and rp(H)LRAP was an additional set of amide resonances for each of the seven non-proline residues between S12 and Y12 near the N-terminus of rp(H)LRAP indicating that the N-terminal region of LRAP exists in two different conformations. Analysis of the proline carbon chemical shifts suggests that the molecular basis for the two states is not a cis-trans isomerization of one or more of the proline residues in the N-terminal region. Starting from 2% acetic acid, where rp(H)LRAP was monomeric in solution, NaCl addition effected residue specific changes in molecular dynamics manifested by the reduction in intensity and disappearance of (1)H-(15)N HSQC cross peaks. As observed for the full-length protein, these perturbations may signal early events governing supramolecular self-assembly of rp(H)LRAP into nanospheres. However, the different patterns of (1)H-(15)N HSQC cross peak perturbation between rp(H)LRAP and rp(H)M180 in high salt suggest that the termini may behave differently in their respective nanospheres, and perhaps, these differences contribute to the cell signaling properties attributable to LRAP but not to the full-length protein.

How amelogenin orchestrates the organization of hierarchical elongated microstructures of apatite

Amelogenin (Amel) accelerates the nucleation of hydroxyapatite (HAP) in supersaturated solutions of calcium phosphate (Ca-P), shortening the induction time (delay period), under near-physiological conditions of pH, temperature, and ionic strength. Hierarchically organized Amel and amorphous calcium phosphate (ACP) nanorod microstructures are formed involving a coassembly of Amel-ACP particles at low supersaturations and low protein concentrations in a slow, well-controlled, constant composition (CC) crystallization system. At the earliest nucleation stages, the CC method allows the capture of prenucleation clusters and intermediate nanoclusers, spherical nanoparticles, and nanochains prior to enamel-like nanorod microstructure formations at later maturation stages. Amel-ACP nanoscaled building blocks are formed spontaneously by synergistic interactions between flexible Amel protein molecules and Ca-P prenucleation clusters, and these spherical nanoparticles evolve by orientated aggregation to form nanochains. Our results suggest that, in vivo, Amel may determine the structure of enamel by controlling prenucleation cluster aggregation at the earliest stages by forming stable Amel-ACP microstructures prior to subsequent crystal growth and mineral maturation.

A study in situ of the effect of metallo- and serine proteinase inhibitors on the birefringence of the secretory stage enamel organic extracellular matrix

Dental enamel formation occurs extracellularly and establishment of an ordered enamel organic extracellular matrix (ECM) seems to be crucial for proper construction of the enamel mineral phase. Polarizing microscopy shows that the ordered supramolecular structure of the secretory stage enamel organic ECM exhibits strong birefringence. We reported earlier that this birefringence is lost in unfixed specimens, probably due to extensive proteolytic cleavage of enamel proteins. Therefore, we investigated the association between enamel proteinase activities by analyzing the effects of metallo- and serine proteinase inhibitors in situ on the birefringence of the secretory stage enamel organic ECM. Male rats were used in the present study. After sacrifice, distal 10 mm fragments of upper incisors were removed and immersed for 15 h under continuous shaking at 37°C in one of the following solutions: 1) 10 mM Tris, pH 8.0; 150 mM NaCl (negative control, n = 8); 2) 2% paraformaldehyde and 0.5% glutaraldehyde in 0.2 M phosphate-buffered saline (PBS), pH 7.2 (positive control, n = 5); 3) 10 mM Tris, pH 8.0; 150 mM NaCl; 2 mM 1,10-phenanthroline (n = 9); 4) 10 mM Tris, pH 8.0; 150 mM NaCl; 2 mM phenylmethyl-sulfonyl fluoride (PMSF) (n = 8); 5) 10 mM Tris, pH 8.0; 150 mM NaCl; 2 mM 1,10-phenanthroline; 2 mM PMSF (n = 9). Samples then were immersed in fixative solution for 24 h and processed to obtain 5 μm thick longitudinal sections of the secretory stage enamel organic ECM. The sections were immersed in 80% glycerin for 30 min and analyzed by transmitted polarizing light microscopy. 1,10-Phenanthroline (inhibitor of metalloproteinases) and 1,10-phenanthroline + PMSF (inhibitor of serine proteinases) clearly prevented a decrease in the optical retardation of birefringence brightness from the tissue. PMSF alone promoted a slight preservation of the birefringence exhibited by the secretory stage enamel organic ECM. Rapid loss of birefringence in secretory stage enamel organic ECM that is not fixed immediately is caused by enamel proteinases and the activity of metalloproteinases seems to lead to preliminary degradation of the enamel organic ECM, which in turn facilitates subsequent serine proteinase activity.

Zeta-potential and particle size analysis of human amelogenins

The developing enamel matrix is a highly dynamic system mainly composed of the full-length amelogenin and its proteolytic cleavage products. In this study, size, zeta-potential, and the isoelectric points of nanoparticles of the recombinant full-length human amelogenin (rH174) and two proteolytic products (rH163 and rH146) were analyzed by dynamic light-scattering and electrokinetic measurements. We tested the hypothesis that zeta-potential may be used as a control parameter in directing the self-assembly of amelogenins. Extensive aggregation of amelogenin molecules with the particle size reaching about one micron occurred at a mildly acidic to neutral pH, and coincided with the red shift of the internal fluorescence. Zeta-potential was between +/- 15 mV in the same pH range, indicating that amelogenin aggregation occurred when surface potentials were minimal. This suggests that electrostatic interactions may be another crucial factor, aside from hydrophobic interaction, in the aggregation and hierarchical assembly of spherical particles of amelogenins into supramolecular structures of a higher order.

Characterization of the dominant molecular step orientations on hydroxyapatite (100) surfaces

Hydroxyapatite (HAP) is the major inorganic component of bones and teeth. The characterization of HAP surfaces on the molecular level is important for achieving a fundamental understanding of bone remodeling and dental caries processes. On the microscopic level, hydroxyapatite growth and dissolution reactions mainly occur at steps. Therefore, this study focuses on individual molecular steps on HAP (100) facets under both static conditions and dynamic dissolution conditions using atomic force microscopy (AFM). We found that molecular steps parallel to the elongated axes of HAP crystals and those angled approximately 54 degrees against the elongated axis are not only energetically favorable but also kinetically dominant under dissolution conditions.

In vitro study on the interaction between the 32 kDa enamelin and amelogenin

Enamel extracelluar matrix components play vital roles in controlling crystal nucleation and growth during enamel formation. We investigated the interaction between the 32 kDa enamelin fragment and amelogenin using immunochemical and biophysical methods. Immunoprecipitation studies revealed that the 32 kDa enamelin and amelogenin eluted together from a Protein A column. Dynamic light scattering results showed that the 32 kDa enamelin had a profound effect on amelogenin assembly at pH 8.0, causing partial dissociation of the nanospheres, in a dose-dependent manner. The appearance of an isodichroic point and the shifting and intensity decrease of the ellipticity minima in the circular dichroism spectra of amelogenin following the addition of the 32 kDa enamelin were indicative of conformational changes in amelogenin and of a direct interaction between the two macromolecules. Our results collectively demonstrate that the 32 kDa enamelin has a direct interaction with amelogenin in vitro. Our current studies provide novel insights into understanding possible cooperation between enamelin and amelogenin in macromolecular self-assembly and in controlling enamel mineral formation.

Adsorption of amelogenin onto self-assembled and fluoroapatite surfaces

The interactions of proteins at surfaces are of great importance to biomineralizaton processes and to the development and function of biomaterials. Amelogenin is a unique biomineralization protein because it self-assembles to form supramolecular structures called "nanospheres", spherical aggregates of monomers that are 20-60 nm in diameter. Although the nanosphere quaternary structure has been observed in solution, the quaternary structure of amelogenin adsorbed onto surfaces is also of great interest because the surface structure is critical to its function. We report studies of the adsorption of the amelogenin onto self-assembled monolayers (SAMs) with COOH and CH(3) end group functionality and single crystal fluoroapatite (FAP). Dynamic light scattering (DLS) experiments showed that the solutions contained nanospheres and aggregates of nanospheres. Protein adsorption onto the various substrates was evidenced by null ellipsometry, X-ray photoelectron spectroscopy (XPS), and external reflectance Fourier transform infrared spectroscopy (ERFTIR). Although only nanospheres were observed in solution, ellipsometry and atomic force microscopy (AFM) indicated that the protein adsorbates were much smaller structures than the original nanospheres, from monomers to small oligomers in size. Monomer adsorption was promoted onto the CH(3) surfaces, and small oligomer adsorption was promoted onto the COOH and FAP substrates. In some cases, remnants of the original nanospheres adsorbed as multilayers on top of the underlying subnanosphere layers. Although the small structures may be present in solution even though they are not detected by DLS, we also propose that amelogenin may adsorb by the "shedding" or disassembling of substructures from the nanospheres onto the substrates. This work suggests that amelogenin may have a range of possible quaternary structures that interact with surfaces.

Changes in the quaternary structure of amelogenin when adsorbed onto surfaces

Amelogenin is a unique protein that self-assembles into spherical aggregates called "nanospheres" and is believed to be involved in controlling the formation of the highly anisotropic and ordered hydroxyapatite crystallites that form enamel. The adsorption behavior of amelogenin onto substrates is of great interest because protein-surface interactions are critical to its function. We report studies of the adsorption of amelogenin onto self-assembled monolayers containing COOH end group functionality as well as single crystal fluoroapatite, a biologically relevant surface. We found that although our solutions contained only nanospheres of narrow size distribution, smaller structures such as dimers or trimers were observed on the hydrophilic surfaces. This suggests that amelogenin can adsorb onto surfaces as small structures that "shed" or disassemble from the nanospheres that are present in solution.

Controlled remineralization of enamel in the presence of amelogenin and fluoride

Reconstructing enamel-like structures on teeth have been an important topic of study in the material sciences and dentistry. The important role of amelogenin in modulating the mineralization of organized calcium phosphate crystals has been previously reported. We used amelogenin and utilized a modified biomimetic deposition method to remineralize the surface of etched enamel to form mineral layers containing organized needle-like fluoridated hydroxyapatite crystals. The effect of a recombinant amelogenins (rP172) on the microstructure of the mineral in the coating was analyzed by SEM, XRD and FT-IR. At rP172 concentrations below 33 microg/mL, no significant effect was observed. In the presence of 1 mg/L F and at a concentration of 33 microg/mL rP172, formation of fused crystals growing from the enamel surface was initiated. Amelogenin promoted the oriented bundle formation of needle-like fluoridated hydroxyapatite in a dose dependent manner. Biomimetic synthesis of the amelogenin fluoridated hydroxyapatite nano-composite is one of the primary steps towards the development and design of novel biomaterial for future application in reparative and restorative dentistry.

A solution NMR investigation into the early events of amelogenin nanosphere self-assembly initiated with sodium chloride or calcium chloride

Using solution-state NMR spectroscopy, new insights into the early events governing amelogenin supramolecular self-assembly have been identified using sodium chloride and calcium chloride to trigger the association. Two-dimensional 1H-15N HSQC spectra were recorded for 15N- and 13C-labeled murine amelogenin as a function of increasing NaCl and CaCl2 concentration beginning with solution conditions of 2% acetic acid at pH 3.0, where amelogenin was monomeric. Residue specific changes in molecular dynamics, manifested by the reduction in intensity and disappearance of 1H-15N HSQC cross-peaks, were observed with the addition of either salt to the protein. With increasing NaCl concentrations, residues between T21 and R31 near the N-terminus were affected first, suggesting that these residues may initiate amelogenin dimerization, the first step in nanosphere assembly. At higher NaCl concentrations, more residues near the N-terminus (Y12-I51) were affected, and with further additions of NaCl, residues near the C-terminus (L141-T171) began to show a similar change in molecular dynamics. With increasing CaCl2 concentrations, a similar stepwise change in molecular dynamics involving essentially the same set of amelogenin residues was observed. As the concentration of either salt was increased, a concomitant increase in the estimated overall rotational correlation time (tau(c)) was observed, consistent with assembly. Self-assembly into a dimer or trimer was established with dynamic light scattering studies under similar conditions that showed an increase in diameter of the smallest species from 4.1 nm in the absence of salt to 10 nm in the presence of salt. These results suggest a possible stepwise interaction mechanism, starting with the N-terminus and followed by the C-terminus, leading to amelogenin nanosphere assembly.

Enzymatic Processing of Amelogenin during Continuous Crystallization of Apatite

Dental enamel forms through a protein-controlled mineralization and enzymatic degradation with a nanoscale precision that new engineering technologies may be able to mimic. Recombinant full-length human amelogenin (rH174) and a matrix-metalloprotease (MMP-20) were employed in a pH-stat titration system that enabled a continuous supply of calcium and phosphate ions over several days, mimicking the initial stages of matrix processing and crystallization in enamel in-vitro. Effects on the self-assembly and crystal growth from a saturated aqueous solution containing 0.4 mg/ml rH174 and MMP-20 with the weight ratio of 1:1000 with respect to rH174 were investigated. A transition from nanospheres to fibrous amelogenin assemblies was facilitated under conditions that involved an interaction between rH174 and the proteolytic cleavage products. Despite continuous titration, the levels of calcium exhibited a consistent trend of decreasing, thereby indicating its possible role in the protein self-assembly. This study suggests that mimicking enamel formation in-vitro requires the synergy between the aspects of matrix self-assembly, proteolysis and crystallization.

Immunogold labeling of amelogenin in developing porcine enamel revealed by field emission scanning electron microscopy

The present study describes a method using immunohistochemical labeling in combination with high-resolution imaging (field emission scanning electron microscopy) to investigate the spatial localization of amelogenins on apatite crystallites in developing porcine enamel. Cross-sections of developing enamel tissue from freeze-fractured pig third molar were treated with antiserum against recombinant mouse amelogenin and immunoreactivity confirmed by Western blot analysis. The samples were then treated with the goat anti-rabbit IgG conjugated with 10-nm gold particles. The control samples were treated with the secondary antibody only. The in-lens secondary electrons detector and quadrant back-scattering detector were employed to reveal the high-resolution morphology of enamel structures and gold particle distribution. The immunolabeling showed a preference of the gold particle localization along the side faces of the ribbon-like apatite crystals. The preferential localization of amelogenin in vivo on enamel crystals strongly supports its direct function in controlling crystal morphology.

The 32kDa enamelin undergoes conformational transitions upon calcium binding

The 32 kDa hydrophilic and acidic enamelin, the most stable cleavage fragment of the enamel specific glycoprotein, is believed to play vital roles in controlling crystal nucleation or growth during enamel biomineralization. Circular dichroism and Fourier transform infrared spectra demonstrate that the secondary structure of the 32 kDa enamelin has a high content of alpha-helix (81.5%). Quantitative analysis on the circular dichroism data revealed that the 32 kDa enamelin undergoes conformational changes with a structural preference to beta-sheet with increasing concentration of calcium ions. We suggest that the increase of beta-sheet conformation in the presence of Ca(2+) may allow preferable interaction of the 32 kDa enamelin with apatite crystal surfaces during enamel biomineralization. The calcium association constant (K(a)=1.55 (+/-0.13)x10(3)M(-1)) of the 32 kDa enamelin calculated from the fitting curve of ellipticity at 222 nm indicated a relatively low affinity. Our current biophysical studies on the 32 kDa enamelin structure provide novel insights towards understanding the enamelin-mineral interaction and subsequently the functions of enamelin during enamel formation.

Mimicking the Self-Organized Microstructure of Tooth Enamel

Under near-physiological pH, temperature, and ionic strength, amelogenin (Amel) accelerates hydroxyapatite (HAP) nucleation kinetics, decreasing the induction time in a concentration-dependent manner. Hierarchically organized apatite microstructures are achieved by self-assembly involving nucleated nanocrystallites and Amel oligomers and nanospheres at low supersaturations and protein concentrations in a slow and well-controlled constant composition (CC) system. The CC method allows the capture of an intermediate structure, the nanorod, following the formation of the critical nuclei at the earliest nucleation stages of calcium phosphate crystallization. The nanorod building blocks form spontaneously by synergistic interactions between flexible Amel protein assemblies and rigid calcium phosphate nanocrystallites. These intermediate structures further assemble by a self-epitaxial growth mechanism to form the final hierarchically organized microstructures that are compositionally and morphologically similar to natural enamel. This in vitro observation provides direct evidence that Amel promotes apatite crystallization and organization. We interpret our observations to propose that in vivo Amel may maximally exert an influence on the structural control of developing enamel crystals at the earliest nucleation stages.

Effects of fluoride on the interactions between amelogenin and apatite crystals

Fluorosed enamel is more porous and less mineralized, possibly related to altered amelogenin-modulated crystal growth. The purpose of this study was to examine the role of fluoride in interactions between amelogenin and apatite crystals. Recombinant human amelogenin (rh174) was bound to carbonated hydroxyapatite containing various amounts of fluoride, and analyzed by protein assay, SDS PAGE, and AFM. Interactions between rh174 and fluoride were assayed by isothermal titration calorimetry (ITC). The initial binding rate of rh174, as well as total amount of rh174 bound to fluoride-containing carbonated hydroxyapatite, was greater than that in the control carbonated hydroxyapatite. Fluoride in solution at physiologic (5.3 micromolar, or 0.1 ppm) concentrations showed no significant effect on binding, but higher fluoride levels significantly decreased protein binding. ITC showed no interactions between fluoride and rh174. These results suggest that fluoride incorporation into the crystal lattice alters the crystal surface to enhance amelogenin binding, with no direct interactions between fluoride and amelogenin.

pH triggered self-assembly of native and recombinant amelogenins under physiological pH and temperature in vitro

Self-assembly of the extracellular matrix protein amelogenin is believed to play an essential role in regulating the growth and organization of enamel crystals during enamel formation. This study examines the effect of temperature and pH on amelogenin self-assembly under physiological pH conditions in vitro, using dynamic light scattering, turbidity measurements, and transmission electron microscopy. Full-length recombinant amelogenins from mouse (rM179) and pig (rP172) were investigated, along with proteolytic cleavage products (rM166 and native P148) lacking the hydrophilic C-terminus of parent molecules. Results indicated that the self-assembly of full-length amelogenin is primarily triggered by pH in the temperature range from 13 to 37 degrees C and not by temperature. Furthermore, very large assemblies of all proteins studied formed through the rearrangement of similarly sized nanospherical particles, although at different pH values: pH 7.7 (P148), pH 7.5 (rM166), pH 7.2 (rP172), and pH 7.2 (rM179). Structural differences were also observed. The full-length molecules formed apparently tightly connected elongated, high-aspect ratio assemblies comprised of small spheres, while the amelogenin cleavage products appeared as loosely associated spherical particles, suggesting that the hydrophilic C-terminus plays an essential role in higher-order amelogenin assembly. Hence, tightly controlled pH values during secretory amelogenesis may serve to regulate the functions of both full-length and cleaved amelogenins.

Amelogenin Promotes the Formation of Elongated Apatite Microstructures in a Controlled Crystallization System

The organic matrix in forming enamel consists largely of the amelogenin protein self-assembled into nanospheres that play a pivotal role in controlling the oriented and elongated growth of highly ordered apatitic crystals during enamel biomineralization. However, the mechanisms of amelogenin-mediated mineralization have not yet been fully elucidated. Here we report that amelogenin dramatically accelerates the nucleation kinetics by decreasing the induction time in a dose-dependent manner in a controlled constant composition (CC) in vitro crystallization system. Remarkably, at very low protein concentrations, elongated microstructures which are similar in appearance to apatitic crystals in enamel were formed at relatively low supersaturations, through interfacial structural match/synergy between structured amelogenin assemblies and apatite nanocrystallites. This heterogeneous crystallization study provides experimental evidence to support the concept that templating by amelogenin very early in the crystallization process facilitates the formation of developing enamel crystals.

Advances in defining regulators of cementum development and periodontal regeneration

Substantial advancements have been made in defining the cells and molecular signals that guide tooth crown morphogenesis and development. As a result, very encouraging progress has been made in regenerating crown tissues by using dental stem cells and recombining epithelial and mesenchymal tissues of specific developmental ages. To date, attempts to regenerate a complete tooth, including the critical periodontal tissues of the tooth root, have not been successful. This may be in part due to a lesser degree of understanding of the events leading to the initiation and development of root and periodontal tissues. Controversies still exist regarding the formation of periodontal tissues, including the origins and contributions of cells, the cues that direct root development, and the potential of these factors to direct regeneration of periodontal tissues when they are lost to disease. In recent years, great strides have been made in beginning to identify and characterize factors contributing to formation of the root and surrounding tissues, that is, cementum, periodontal ligament, and alveolar bone. This review focuses on the most exciting and important developments over the last 5 years toward defining the regulators of tooth root and periodontal tissue development, with special focus on cementogenesis and the potential for applying this knowledge toward developing regenerative therapies. Cells, genes, and proteins regulating root development are reviewed in a question-answer format in order to highlight areas of progress as well as areas of remaining uncertainty that warrant further study.

Dynamic light scattering study of an amelogenin gel-like matrix in vitro

Amelogenin self-assembly is critical for the structural organization of apatite crystals during enamel mineralization. The aim of the present study was to investigate the influence of temperature and protein concentration on the aggregation of amelogenin nanospheres at high protein concentrations (>4.4 mg ml-1) in order to obtain an insight into the mechanism of amelogenin self-assembly to form higher-order structures. Amelogenins were extracted from enamel scrapings of unerupted mandibular pig molars. The dynamics of protein solutions were measured using dynamic light scattering (DLS) as a function of temperature and at acidic pH. At pH 4-5.5, three kinds of particles were observed, ranging in size from 3 to 80 nm. At pH 6, heating the solution above approximately 30 degrees C resulted in a drastic change in the solution transparency, from clear to opaque. Low pH showed no aggregation effect, whilst solutions at a slightly acidic pH exhibited diffusion dynamics associated with the onset of aggregation. In addition, at the same temperature range, the hydrodynamic radii of the aggregates increased drastically, by almost one order of magnitude. These observations support the view that hydrophobic interactions are the primary driving force for the pH- and temperature-sensitive self-assembly of amelogenin particles in a 'gel-like' matrix. The trend of self-assembly in a 'gel-like matrix' is similar to that in solution.

Self-assembly and effect on crystal growth of the leucine-rich amelogenin peptide

Amelogenins are a unique group of alternatively spliced proteins. While the full-length amelogenin is known to assemble into nanospheres and alter apatite crystal growth and alignment, the function of the leucine-rich amelogenin peptide (LRAP) in biomineralization is not understood. This study tested the hypothesis that LRAP self-assembles into a supramolecular structure and guides crystal growth similarly to the full-length protein. Synthetic LRAP and recombinant full-length amelogenin (rH175) were used at different concentrations and either immobilized onto fluoroapatite substrates (FAP) or immersed into saturated calcium-phosphate solutions. The structure of the assembled protein and the height of apatite crystals formed on the FAP template were determined using atomic force microscopy. Both LRAP and rH175 assembled into nanospheres. LRAP self-assembly, however, was only observed at concentrations of >0.5 mg ml-1 and limited to sizes between 5 and 30 nm. Apatite crystal growth was not significantly affected by LRAP, while rH175 accelerated crystal growth by up to 50-fold. The increased growth rate was only observed when rH175 precipitated at concentrations of >0.8 mg ml-1. It was concluded that the ability of amelogenins to self-assemble into nanospheres and to bind to apatite in vitro is not inevitably an indication for the ability to control apatite crystal growth.

On the formation of amelogenin microribbons

We recently reported the remarkable spontaneous self-assembly and hierarchical organization of amelogenin 'microribbons' and their ability to facilitate oriented growth of apatite crystals in vitro. In a letter of correction we communicated the finding that the X-ray diffraction pattern reported in our original report was that of cellulose contaminant and not amelogenin microribbon. We have re-evaluated our data and confirmed the protein nature of the microribbons using Fourier transform infrared and Raman microspectroscopy. Some microribbons were remarkably similar in their morphology to that of cellulose fibers. The size distribution of amelogenin microribbons was wider, particularly in width and length, and generally smaller than those originally reported. Here we present additional detailed information on the formation of a series of intermediate hierarchical structures of amelogenin assemblies prior to the formation of microribbon. The most significant finding was that full-length amelogenin nanospheres had a tendency to assemble into collinear arrays whose function is assumed to be critical at the initial stage of enamel mineral deposition. The present data gives an insight into the step-by-step assembly process of amelogenin from nanometer scale molecules to micrometer scale organized structures that can be used as templates for controlled and oriented growth of apatite mineralization in vitro.

Comparative calcium binding of leucine-rich amelogenin peptide and full-length amelogenin

Leucine-rich amelogenin peptide (LRAP) is an alternately spliced amelogenin. LRAP is known to bind to hydroxyapatite, and has been shown to signal mesenchymal cells to proliferate, but its function in enamel formation is unclear. The purpose of this study was to determine the calcium-binding properties and structure of recombinant human LRAP (rLRAP) compared with full-length amelogenin (rH174). rLRAP and rH174 were synthesized in Escherichia coli and purified by affinity chromatography and reverse-phase high-performance liquid chromatography. Calcium binding was measured by isothermal titration calorimetry (ITC) at pH 7.5 and 25 degrees C, and raw data were analyzed by origin 7.0 software. The structure of rLRAP was analyzed by nuclear magnetic resonance (NMR) and circular dichroism (CD) in the absence or presence of Ca2+, pH 7.5 and 4.0, at 25 degrees C. Thermodynamic values showed that rLRAP had a Ca2+-binding affinity approximately 6.4-times greater than rH174. NMR and CD data revealed that rLRAP was randomly coiled, and that this structure was not altered by Ca2+, which bound to rLRAP and rH174 via ionic interactions. Unlike r174 (beta-spiral), rLRAP had a random-coiled structure. The calcium binding and structural differences between rLRAP and rH174 suggest that these proteins have different functions in enamel biomineralization.

Amelogenin Supra-Molecular Assembly in vitro Compared with the Architecture of the Forming Enamel Matrix

Tooth enamel is formed in the extracellular space within an organic matrix enriched in amelogenin proteins. Amelogenin nanosphere assembly is a key factor in controlling the oriented and organized growth of enamel apatite crystals. Recently, we have reported the formation of higher ordered structures resulting from organized association and self-orientation of amelogenin nanospheres in vitro. This remarkable hierarchical organization includes self-assembly of amelogenin molecules into subunits of 4-6 nm in diameter followed by their assembly to form nanospheres of 15-25 nm in radii. Chains of >100 nm length are then formed as the result of nanosphere association. These linear arrays of nanospheres assemble to form the microribbons that are hundreds of microns in length, tens of microns in width, and a few microns in thickness. Here, we review the step by step process of amelogenin self-assembly during the formation of microribbon structures in vitro. Assembly properties of selected amelogenins lacking the hydrophilic C terminus will then be reviewed. We will consider amelogenin as a template for the organized growth of crystals in vitro. Finally, we will compare the structures formed in vitro with globular and periodic structures observed earlier, in vivo, by different sample preparation conditions. We propose that the alignment of amelogenin nanospheres into long chains is evident in vivo, and is an important indication for the function of this protein in controlling the oriented and elongated growth of apatite crystals during enamel biomineralization.

Electromechanical imaging of biomaterials by scanning probe microscopy

The majority of calcified and connective tissues possess complex hierarchical structure spanning the length scales from nanometers to millimeters. Understanding the biological functionality of these materials requires reliable methods for structural imaging on the nanoscale. Here, we demonstrate an approach for electromechanical imaging of the structure of biological samples on the length scales from tens of microns to nanometers using piezoresponse force microscopy (PFM), which utilizes the intrinsic piezoelectricity of biopolymers such as proteins and polysaccharides as the basis for high-resolution imaging. Nanostructural imaging of a variety of protein-based materials, including tooth, antler, and cartilage, is demonstrated. Visualization of protein fibrils with sub-10nm spatial resolution in a human tooth is achieved. Given the near-ubiquitous presence of piezoelectricity in biological systems, PFM is suggested as a versatile tool for micro- and nanostructural imaging in both connective and calcified tissues.

Protein–Protein Interactions of the Developing Enamel Matrix

Extracellular matrix proteins control the formation of the inorganic component of hard tissues including bone, dentin, and enamel. The structural proteins expressed primarily in the enamel matrix are amelogenin, ameloblastin, enamelin, and amelotin. Other proteins, like biglycan, are also present in the enamel matrix as well as in other mineralizing and nonmineralizing tissues of mammals. In addition, the presence of sulfated enamel proteins, and "tuft" proteins has been examined and discussed in relation to enamel formation. The structural proteins of the enamel matrix must have specific protein-protein interactions to produce a matrix capable of directing the highly ordered structure of the enamel crystallites. Protein-protein interactions are also likely to occur between the secreted enamel proteins and the plasma membrane of the enamel producing cells, the ameloblasts. Such protein-protein interactions are hypothesized to influence the secretion of enamel proteins, establish short-term order of the forming matrix, and to mediate feedback signals to the transcriptional machinery of these cells. Membrane-bound proteins identified in ameloblasts, and which interact with the structural enamel proteins, include Cd63 (cluster of differentiation 63 antigen), annexin A2 (Anxa2), and lysosomal-associated glycoprotein 1 (Lamp1). These and related data help explain the molecular and cellular mechanisms responsible for the removal of the organic enamel matrix during the events of enamel mineralization, and how the enamel matrix influences its own fate through signaling initiated at the cell surface. The knowledge gained from enamel developmental studies may lead to better dental and nondental materials, or materials inspired by Nature. These data will be critical to scientists, engineers, and dentists in their pursuits to regenerate an entire tooth. For tooth regeneration to become a reality, the protein-protein interactions involving the key dental proteins must be identified and understood. The scope of this review is to discuss the current understanding of protein-protein interactions of the developing enamel matrix, and relate this knowledge to enamel biomineralization.

High yield of biologically active recombinant human amelogenin using the baculovirus expression system

The amelogenins are secreted by the ameloblast cells of developing teeth; they constitute about 90% of the enamel matrix proteins and play an important role in enamel biomineralization. Recent evidence suggests that amelogenin may also be involved in the regeneration of the periodontal tissues and that different isoforms may have cell-signalling effects. During enamel development and mineralization, the amelogenins are lost from the tissue due to sequential degradation by specific proteases, making isolation of substantial purified quantities of full-length amelogenin challenging. The aim of the present study was to express and characterize a recombinant human amelogenin protein in the eukaryotic baculovirus system in quantities sufficient for structural and functional studies. Human cDNA coding for a 175 amino acid amelogenin protein was subcloned into the pFastBac HTb vector (Invitrogen), this system adds a hexa-histidine tag and an rTEV protease cleavage site to the amino terminus of the expressed protein, enabling effective one-step purification by Ni2+-NTA affinity chromatography. The recombinant protein was expressed in Spodoptera frugiperda (Sf9) insect cells and the yield of purified his-tagged human amelogenin (rHAM+) was up to 10 mg/L culture. Recombinant human amelogenin (rHAM+) was characterized by SDS-PAGE, Western blot, ESI-TOF spectrometry, peptide mapping, and MS/MS sequencing. Production of significant amounts of pure, full-length amelogenin opened up the possibility to investigate novel functions of amelogenin. Our recent in vivo regeneration studies reveal that the rHAM+ alone could bring about regeneration of the periodontal tissues; cementum, periodontal ligament, and bone.