MicroCT analysis of vascular morphometry: a comparison of right lung lobes in the SUGEN/hypoxic rat model of pulmonary arterial hypertension

Microcomputed tomography visualization and quantitation of the pulmonary arterial microvascular tree in mouse models of chronic lung disease

Pulmonary vascular dysfunction is characterized by remodeling and loss of microvessels in the lung and is a major manifestation of chronic lung diseases (CLD). In murine models of CLD, the small arterioles and capillaries are the first and most prevalent vessels that are affected by pruning and remodeling. Thus, visualization of the pulmonary arterial vasculature in three dimensions is essential to define pruning and remodeling both temporally and spatially and its role in the pathogenesis of CLD, aging, and tissue repair. To this end, we have developed a novel method to visualize and quantitate the murine pulmonary arterial circulation using microcomputed tomography (µCT) imaging. Using this perfusion technique, we can quantitate microvessels to approximately 6 µM in diameter. We hypothesize that bleomycin-induced injury would have a significant impact on the arterial vascular structure. As proof of principle, we demonstrated that as a result of bleomycin-induced injury at peak fibrosis, significant alterations in arterial vessel structure were visible in the three-dimensional models as well as quantification. Thus, we have successfully developed a perfusion methodology and complementary analysis techniques, which allows for the reconstruction, visualization, and quantitation of the mouse pulmonary arterial microvasculature in three-dimensions. This tool will further support the examination and understanding of angiogenesis during the development of CLD as well as repair following injury.

The CT pulmonary vascular parameters and disease severity in COPD patients on acute exacerbation: a correlation analysis

Background

It is necessary to analyze the CT pulmonary vascular parameters and disease severity in chronic obstructive pulmonary disease (COPD) patients to provide evidence support for the management of COPD.

Methods

COPD patients on acute exacerbation admitted to our hospital from COPD patients from January 2019 to March 2020 was selected. The characteristics and ratio of the cross-sectional area (CSA) of small pulmonary vessels to the total area of the lung field, and the ratio of pulmonary artery and aorta (PA/A) cross-sectional diameter in patients with COPD were analyzed.

Results

A total of 128 COPD patients were included. There were significant differences in the duration of COPD, smoking history, the PaO₂, PaCO₂, pH, and FEV1, FVC and FEV1/FVC among COPD patients with different severity (all p < 0.05). The duration of COPD, smoking, PaO₂, PaCO₂, CSA and PA/A were correlated with the COPD severity (all p < 0.05). Both CSA, PA/A were correlated with post BD FEV1 (all p < 0.05). The cutoff value of CSA and PA/A for the diagnosis of severe COPD was 0.61 and 0.87 respectively, and the AUC of CSA and PA/A for the diagnosis of severe COPD was 0.724 and 0.782 respectively.

Conclusions

Patients with CSA ≤ 0.61 and PA/A ≥ 0.87 may have higher risks for severe COPD, and more studies are needed in the future to further elucidate the management of COPD.

Combination of µCT and light microscopy for generation-specific stereological analysis of pulmonary arterial branches: a proof-of-concept study

Various lung diseases, including pulmonary hypertension, chronic obstructive pulmonary disease or bronchopulmonary dysplasia, are associated with structural and architectural alterations of the pulmonary vasculature. The light microscopic (LM) analysis of the blood vessels is limited by the fact that it is impossible to identify which generation of the arterial tree an arterial profile within a LM microscopic section belongs to. Therefore, we established a workflow that allows for the generation-specific quantitative (stereological) analysis of pulmonary blood vessels. A whole left rabbit lung was fixed by vascular perfusion, embedded in glycol methacrylate and imaged by micro-computed tomography (µCT). The lung was then exhaustively sectioned and 20 consecutive sections were collected every 100 µm to obtain a systematic uniform random sample of the whole lung. The digital processing involved segmentation of the arterial tree, generation analysis, registration of LM sections with the µCT data as well as registration of the segmentation and the LM images. The present study demonstrates that it is feasible to identify arterial profiles according to their generation based on a generation-specific color code. Stereological analysis for the first three arterial generations of the monopodial branching of the vasculature included volume fraction, total volume, lumen-to-wall ratio and wall thickness for each arterial generation. In conclusion, the correlative image analysis of µCT and LM-based datasets is an innovative method to assess the pulmonary vasculature quantitatively.

Microvascularization of the human central and peripheral nervous system: A new microcomputed tomography method

Microcomputed X-ray tomography (microCT), developed since the late 1990s, is a miniaturized version of the tomographs used daily in medical imaging. It produces vascular images that are different from those obtained by microradiography, in particular by facilitating the vision in space, thus understanding microvascularisation. The anatomical specimens, once treated with formalin, are injected with a mixture made of gelatin containing a contrast product (barium) and then analyzed by microCT. The acquisition times that can exceed 24hours and metal sheets used for X-ray filtering vary according to the sample. The projection images are reconstructed to produce 2D sections. These are combined for the reconstruction of 3D models using a volume rendering software. Four examples will allow the imaging of microvascularization: the inferior alveolar nerve, the cerebral cortex and pia-mother, brain stem, central gray nuclei (ganglia at the base of the brain). Small capillaries are highlighted using high-end software for reconstruction. Conventional software or freeware cause a considerable loss of information on small vessels that are not visualized. The VGStudio max high-end software allows the production of videos that are particularly useful for 3D exploration and teaching (four videos are provided with this article).

Pulmonary vessel casting in a rat model of monocrotaline-mediated pulmonary hypertension

Pulmonary hypertension is a chronic vascular disease characterized by pulmonary vasoconstriction and pulmonary arterial remodeling. Pulmonary arterial remodeling is mainly due to small pulmonary arterial wall thickening and lumen occlusion. Previous studies have described intravascular changes in lung sections using histopathology, but few were able to obtain a fine detailed image of the pulmonary vascular system. In this study, we used Microfil compounds to cast the pulmonary arteries in a rat model of monocrotaline-induced pulmonary hypertension. High-quality images that enabled quantification of distal pulmonary arterial branching based on the number of vessel bifurcations/junctions were demonstrated in this model. The branch and junction counts of distal pulmonary arteries significantly decreased in the monocrotaline group compared to the control group, and this effect was inversely proportional to the mean pulmonary artery pressure observed in each group. The patterns of pulmonary vasculature and the methods for pulmonary vessel casting are presented to provide a basis for future studies of pulmonary arterial remodeling due to pulmonary hypertension and other lung diseases that involve the remodeling of vasculature.

Vascular Casting of Adult and Early Postnatal Mouse Lungs for Micro-CT Imaging

Blood vessels form intricate networks in 3-dimensional space. Consequently, it is difficult to visually appreciate how vascular networks interact and behave by observing the surface of a tissue. This method provides a means to visualize the complex 3-dimensional vascular architecture of the lung. To accomplish this, a catheter is inserted into the pulmonary artery and the vasculature is simultaneously flushed of blood and chemically dilated to limit resistance. Lungs are then inflated through the trachea at a standard pressure and the polymer compound is infused into the vascular bed at a standard flow rate. Once the entire arterial network is filled and allowed to cure, the lung vasculature may be visualized directly or imaged on a micro-CT (µCT) scanner. When performed successfully, one can appreciate the pulmonary arterial network in mice ranging from early postnatal ages to adults. Additionally, while demonstrated in the pulmonary arterial bed, this method can be applied to any vascular bed with optimized catheter placement and endpoints.

Optimizing imaging of the rat pulmonary microvasculature by micro-computed tomography

Micro-computed tomography (micro-CT) is used in pre-clinical research to generate high-resolution three-dimensional (3D) images of organs and tissues. When combined with intravascular contrast agents, micro-CT can provide 3D visualization and quantification of vascular networks in many different organs. However, the lungs present a particular challenge for contrast perfusion due to the complexity and fragile nature of the lung microcirculation. The protocol described here has been optimized to achieve consistent lung perfusion of the microvasculature to vessels < 20 microns in both normal and pulmonary arterial hypertension rats. High-resolution 3D micro-CT imaging can be used to better visualize changes in 3D architecture of the lung microcirculation in pulmonary vascular disease and to assess the impact of therapeutic strategies on microvascular structure in animal models of pulmonary arterial hypertension.

Combination therapy improves vascular volume in female rats with pulmonary hypertension

Pulmonary arterial hypertension (PAH) is a female predominant disease in which progressive vascular remodeling and vasoconstriction result in right ventricular (RV) failure and death. Most PAH patients utilize multiple therapies. In contrast, the majority of preclinical therapeutic studies are performed in male rats with a single novel drug often markedly reversing disease in the model. We sought to differentiate single drug therapy from combination therapy in female rats with severe disease. One week after left pneumonectomy, we induced PH in young female Sprague-Dawley rats with an injection of monocrotaline (45 mg/kg). Female rats were then randomized to receive combination therapy (ambrisentan plus tadalafil), ambrisentan monotherapy, tadalafil monotherapy, or vehicle. We measured RV size and function on two serial echocardiograms during the development of disease. We measured RV systolic pressure (RVSP) invasively at day 28 after monocrotaline before analyzing the vascular volume with microcomputed tomography (microCT) of the right middle lobe. RVSP was significantly lower in female rats treated with combination therapy, and combination therapy resulted in increased small vessel volume density measured by microCT compared with untreated rats. Combination-treated rats had the smallest RV end-diastolic diameter on echocardiogram as compared with the other groups. In summary, we report a female model of pulmonary hypertension that can distinguish between one and two drug therapies; this model may facilitate better preclinical drug testing for novel compounds.

Adverse effect of smoking on cross-sectional area of small pulmonary vessel and arterial stiffness in healthy smokers without COPD

INTRODUCTION

Because it induces systemic inflammation, smoking is a risk factor of atherosclerosis and pulmonary hypertension. The brachial-ankle pulse wave velocity (baPWV) and cross-sectional area (CSA) of small pulmonary vessels can be useful markers to assess early changes of arterial stiffness and pulmonary vascular alteration in smokers.

OBJECTIVES

This study aimed to explore association between the CSA of small pulmonary vessel and arterial stiffness in healthy male smokers.

METHODS

We enrolled 90 male non-smokers and 90 male smokers (age: 51.5 ± 9.7 years and 52.1 ± 7.9 years, respectively). All subjects underwent chest computed tomography (CT), pulmonary function test and baPWV measurement. We evaluated the total CSAs less than 5 mm² using ImageJ software and divided by the total lung area (%CSA<5). We compared the association between baPWV and %CSA<5 in two groups as well as correlations among the amount of smoking, baPWV and %CSA<5. Multiple linear regression analysis using %CSA<5 as the dependent variable was also performed.

RESULTS

The mean baPWV and mean %CSA<5 were significantly different between the smokers and non-smokers. The pack-years was significantly correlated with %CSA<5 (r = -0.631, P < 0.001) and baPWV (r = 0.534, P < 0.001) in smokers. In multiple linear regression analysis, age, pack-years, FEV₁ /FVC and baPWV were associated with %CSA<5, regardless of body mass index, blood pressure and heart rate.

CONCLUSIONS

There is a dose-response relationship between cigarette smoking and the CSA of small pulmonary vessels and arterial stiffness, respectively. Arterial stiffness, age, pack-years and mild airflow impairment are independent predictors of small pulmonary vascular destruction in smokers.

Application of a novel in vivo imaging approach to measure pulmonary vascular responses in mice

Noninvasive imaging of the murine pulmonary vasculature is challenging due to the small size of the animal, limits of resolution of the imaging technology, terminal nature of the procedure, or the need for intravenous contrast. We report the application of laboratory-based high-speed, high-resolution x-ray imaging, and image analysis to detect quantitative changes in the pulmonary vascular tree over time in the same animal without the need for intravenous contrast. Using this approach, we detected an increased number of vessels in the pulmonary vascular tree of animals after 30 min of recovery from a brief exposure to inspired gas with 10% oxygen plus 5% carbon dioxide (mean ± standard deviation: 2193 ± 382 at baseline vs. 6177 ± 1171 at 30 min of recovery; P < 0.0001). In a separate set of animals, we showed that the total pulmonary blood volume increased (P = 0.0412) while median vascular diameter decreased from 0.20 mm (IQR: 0.15-0.28 mm) to 0.18 mm (IQR: 0.14-0.26 mm; P = 0.0436) over the respiratory cycle from end-expiration to end-inspiration. These findings suggest that the noninvasive, nonintravenous contrast imaging approach reported here can detect dynamic responses of the murine pulmonary vasculature and may be a useful tool in studying these responses in models of disease.

Recent developments in 3-D reconstruction and stereology to study the pulmonary vasculature

Alterations of the pulmonary vasculature are an important feature of human lung diseases such as chronic obstructive pulmonary disease, pulmonary hypertension, and bronchopulmonary dysplasia. Experimental studies to investigate the pathogenesis or a therapeutic intervention in animal models of these diseases often require robust, meaningful, and efficient morphometric data that allow for appropriate statistical testing. The gold standard for obtaining such data is design-based stereology. However, certain morphological characteristics of the pulmonary vasculature make the implementation of stereological methods challenging. For example, the alveolar capillary network functions according to the sheet flow principle, thus making unbiased length estimations impossible and requiring other strategies to obtain mechanistic morphometric data. Another example is the location of pathological changes along the branches of the vascular tree. For developmental defects like in bronchopulmonary dysplasia or for pulmonary hypertension, it is important to know whether certain segments of the vascular tree are preferentially altered. This cannot be overcome by traditional stereological methods but requires the combination of a three-dimensional data set and stereology. The present review aims at highlighting the great potential while discussing the major challenges (such as time consumption and data volume) of this combined approach. We hope to raise interest in the potential of this approach and thus stimulate solutions to overcome the existing challenges.

Novel imaging approaches for small animal models of lung disease (2017 Grover Conference series)

Imaging in small animal models of lung disease is challenging, as existing technologies are limited either by resolution or by the terminal nature of the imaging approach. Here, we describe the current state of small animal lung imaging, the technological advances of laboratory-sourced phase contrast X-ray imaging, and the application of this novel technology and its attendant image analysis techniques to the in vivo imaging of the large airways and pulmonary vasculature in murine models of lung health and disease.