Fibrinogen variant BbetaD432A has normal polymerization but does not bind knob "B"

A role of methionines in the functioning of oxidatively modified fibrinogen

Posttranslational modifications in fibrinogen resulting from induced oxidation or oxidative stress in the organism can have deleterious influence on optimal functioning of fibrinogen, causing a disturbance in assembly and properties of fibrin. The protective mechanism supporting the ability of fibrinogen to function in ROS-generating environment remains completely unexplored. The effects of very low and moderately low HOCl/-OCl concentrations on fibrinogen oxidative modifications, the fibrin network structure as well as the kinetics of both fibrinogen-to-fibrin conversion and fibrin hydrolysis have been explored in the current study. As opposed to 25 Μm, HOCl/-OCl, 10 μM HOCl/-OCl did not affect the functional activity of fibrinogen. It is shown for the first time that a number of Met residues, AαMet476, AαMet517, AαMet584, BβMet367, γMet264, and γMet94, identified in 10 μM HOCl/-OCl fibrinogen by the HPLC-MS/MS method, operate as ROS scavengers, performing an important antioxidant function. In turn, this indicates that the fibrinogen structure is adapted to the detrimental action of ROS. The results obtained in our study provide evidence for a protective mechanism responsible for maintaining the structure and functioning of fibrinogen molecules in the bloodstream under conditions of mild and moderate oxidative stress.

Fibrin protofibril packing and clot stability are enhanced by extended knob-hole interactions and catch-slip bonds

Fibrin polymerization involves thrombin-mediated exposure of knobs on one monomer that bind to holes available on another, leading to the formation of fibers. In silico evidence has suggested that the classical A:a knob-hole interaction is enhanced by surrounding residues not directly involved in the binding pocket of hole a, via noncovalent interactions with knob A. We assessed the importance of extended knob-hole interactions by performing biochemical, biophysical, and in silico modeling studies on recombinant human fibrinogen variants with mutations at residues responsible for the extended interactions. Three single fibrinogen variants, γD297N, γE323Q, and γK356Q, and a triple variant γDEK (γD297N/γE323Q/γK356Q) were produced in a CHO (Chinese Hamster Ovary) cell expression system. Longitudinal protofibril growth probed by atomic force microscopy was disrupted for γD297N and enhanced for the γK356Q mutation. Initial polymerization rates were reduced for all variants in turbidimetric studies. Laser scanning confocal microscopy showed that γDEK and γE323Q produced denser clots, whereas γD297N and γK356Q were similar to wild type. Scanning electron microscopy and light scattering studies showed that fiber thickness and protofibril packing of the fibers were reduced for all variants. Clot viscoelastic analysis showed that only γDEK was more readily deformable. In silico modeling suggested that most variants displayed only slip-bond dissociation kinetics compared with biphasic catch-slip kinetics characteristics of wild type. These data provide new evidence for the role of extended interactions in supporting the classical knob-hole bonds involving catch-slip behavior in fibrin formation, clot structure, and clot mechanics.

Strength, deformability and toughness of uncrosslinked fibrin fibers from theoretical reconstruction of stress-strain curves

Structural mechanisms underlying the mechanical properties of fibrin fibers are elusive. We combined tensile testing of uncrosslinked fibrin polymers in vitro and in silico to explore their material properties. The experimental stress (σ) - strain (ε) curves for fibrin fibers are characterized by elastic deformations with a weaker elastic response for ε<160% due to unraveling of αC tethers and straightening of fibrin protofibrils, and a stronger response for ε>160% owing to unfolding of the coiled coils and γ nodules in fibrin monomers. Fiber rupture for strains ε>212% is due to dissociation of the knob-hole bonds and rupture of D:D interfaces. We developed the Fluctuating Bilinear Spring model to interpret the σ-ε profiles in terms of the free energy for protofibril alignment ΔG0 = 10.1-11.5 kBT, Young's moduli for protofibril alignment Yu = 1.9-3.2 MPa and stretching Ya = 5.7-9.7 MPa, strain scale ε˜≈ 12-40% for fiber rupture, and protofibril cooperativity m= 3.6-8. We applied the model to characterize the fiber strength σcr≈ 12-13 MPa, deformability εcr≈ 222%, and rupture toughness U≈ 9 MJ/m3, and to resolve thermodynamic state functions, 96.9 GJ/mol entropy change for protofibril alignment (at room temperature) and 113.6 GJ/mol enthalpy change for protofibril stretching, which add up to 210.5 GJ/mol free-energy change. Fiber elongation is associated with protofibril dehydration and sliding mechanism to create an ordered protofibril array. Fibrin fibers behave like a hydrogel; protofibril dehydration and water expulsion account for ∼94-98% of the total free-energy changes for fiber elongation and rupture. STATEMENT OF SIGNIFICANCE: Structural mechanisms underlying the mechanical properties of fibrin fibers, major components of blood clots and obstructive thrombi, are elusive. We performed tensile testing of uncrosslinked fibrin polymers in vitro and in silico to explore their material properties. Fluctuating Bilinear Spring theory was developed to interpret the stress-strain profiles in terms of the energy for protofibril alignment, elastic moduli for protofibril alignment and stretching, and strain scale for fiber rupture, and to probe the limits of fiber strength, extensibility and toughness. Fibrin fibers behave like a hydrogel. Fiber elongation is defined by the protofibril dehydration and sliding. Structural rearrangements in water matrix control fiber elasticity. These results contribute to fundamental understanding of blood clot breakage that underlies thrombotic embolization.

Hypochlorite-induced oxidation of fibrinogen: Effects on its thermal denaturation and fibrin structure

BACKGROUND

Human fibrinogen, which plays a key role in plasma haemostasis, is a highly vulnerable target for oxidants. Fibrinogen undergoes posttranslational modifications that can potentially disrupt protein structure and function.

METHODS

For the first time, by differential scanning calorimetry, dynamic and elastic light scattering and confocal laser scanning microscopy, the consequences of HOCl/^-OCl-induced oxidation of fibrinogen on its thermal denaturation, molecular size distribution and fibrin clot network have been explored.

RESULTS

Within a wide range of HOCl/^-OCl concentrations (50-300 μM), the molecular size distribution remained unimodal; however, the average size of the hydrated molecules decreased. HOCl/^-OCl-induced oxidation of fibrinogen resulted in the diminished thermal stability of regions D and E. As evidenced by elastic light scattering and confocal laser scanning microscopy, HOCl/^-OCl caused the formation of abnormal fibrin with a decreased diameter of individual fibres.

CONCLUSIONS

The current results along with data from previous studies enable one to conclude that the effect of HOCl/^-OCl-mediated oxidation on the thermal stability of region D is influenced directly by oxidative damage to the D region structure. Since the E region is not subjected to oxidative modification, its structural damage is likely to be mediated by the oxidation of other protein structures, in particular α-helical coiled-coils.

GENERAL SIGNIFICANCE

The experimental findings acquired in the current study could help to elucidate the consequences of oxidative stress in vivo on damage to the structure of fibrinogen/fibrin under the action of different ROS species.

Oxidation-induced modification of the fibrinogen polypeptide chains

By using the mass-spectrometry method, the oxidative modifications of the fibrinogen Aα, Bβ, and γ polypeptide chains induced by its oxidation have been studied. The αC-region has been proven to be the most vulnerable target for the oxidizer (ozone) as compared with the other structural elements of the Aα chain. The Bβ chain mapping shows that the oxidative sites are localized within all the structural elements of the chain in which the β-nodule exhibits high susceptibility to oxidation. The γ chains are the least vulnerable to the oxidizer action. The results obtained demonstrate convincingly that the self-assembly centers dealing with interactions of knob "A": hole "a" are not involved in oxidative modification. It is concluded that the numerous oxidative sites revealed are mainly responsible for inhibiting lateral aggregation of protofibrils. The part of amino acid residues subjected to oxidation is supposed to carry out the antioxidant function.

Structural Basis of Interfacial Flexibility in Fibrin Oligomers

Fibrin is a filamentous network made in blood to stem bleeding; it forms when fibrinogen is converted into fibrin monomers that self-associate into oligomers and then to polymers. To gather structural insights into fibrin formation and properties, we combined high-resolution atomic force microscopy of fibrin(ogen) oligomers and molecular modeling of crystal structures of fibrin(ogen) and its fragments. We provided a structural basis for the intermolecular flexibility of single-stranded fibrin(ogen) oligomers and identified a hinge region at the D:D inter-monomer junction. Following computational reconstruction of the missing portions, we recreated the full-atomic structure of double-stranded fibrin oligomers that was validated by quantitative comparison with the experimental images. We characterized previously unknown intermolecular binding contacts at the D:D and D:E:D interfaces, which drive oligomerization and reinforce the intra- and inter-strand connections in fibrin besides the known knob-hole bonds. The atomic models provide valuable insights into the submolecular mechanisms of fibrin polymerization.

Neprilysin Inhibits Coagulation through Proteolytic Inactivation of Fibrinogen

Neprilysin (NEP) is an endogenous protease that degrades a wide range of peptides including amyloid beta (Aβ), the main pathological component of Alzheimer's disease (AD). We have engineered NEP as a potential therapeutic for AD but found in pre-clinical safety testing that this variant increased prothrombin time (PT) and activated partial thromboplastin time (APTT). The objective of the current study was to investigate the effect of wild type NEP and the engineered variant on coagulation and define the mechanism by which this effect is mediated. PT and APTT were measured in cynomolgus monkeys and rats dosed with a human serum albumin fusion with an engineered variant of NEP (HSA-NEPv) as well as in control plasma spiked with wild type or variant enzyme. The coagulation factor targeted by NEP was determined using in vitro prothrombinase, calibrated automated thrombogram (CAT) and fibrin formation assays as well as N-terminal sequencing of fibrinogen treated with the enzyme. We demonstrate that HSA-NEP wild type and HSA-NEPv unexpectedly impaired coagulation, increasing PT and APTT in plasma samples and abolishing fibrin formation from fibrinogen. This effect was mediated through cleavage of the N-termini of the Aα- and Bβ-chains of fibrinogen thereby significantly impairing initiation of fibrin formation by thrombin. Fibrinogen has therefore been identified for the first time as a substrate for NEP wild type suggesting that the enzyme may have a role in regulating fibrin formation. Reductions in NEP levels observed in AD and cerebral amyloid angiopathy may contribute to neurovascular degeneration observed in these conditions.

Mice expressing a mutant form of fibrinogen that cannot support fibrin formation exhibit compromised antimicrobial host defense

Fibrin(ogen) is central to hemostasis and thrombosis and also contributes to multiple physiologic and pathologic processes beyond coagulation. However, the precise contribution of soluble fibrinogen vs insoluble fibrin matrices to vascular integrity, tissue repair, inflammation, and disease has been undefined and unapproachable. To establish the means to distinguish fibrinogen- and fibrin-dependent processes in vivo, Fib(AEK) mice were generated that carry normal levels of circulating fibrinogen but lack the capacity for fibrin polymer formation due to a germ-line mutation in the Aα chain thrombin cleavage site. Homozygous Fib(AEK) mice developed to term and exhibited postnatal survival superior to that of fibrinogen-deficient mice. Unlike fibrinogen-deficient mice, platelet-rich plasma from Fib(AEK) mice supported normal platelet aggregation in vitro, highlighting that fibrinogen(AEK) retains the functional capacity to support interactions with platelets. Thrombin failed to release fibrinopeptide-A from fibrinogen(AEK) and failed to induce polymer formation with Fib(AEK) plasma or purified fibrinogen(AEK) in 37°C mixtures regardless of incubation time. Fib(AEK) mice displayed both an absence of fibrin polymer formation following liver injury, as assessed by electron microscopy, and a failure to generate stable occlusive thrombi following FeCl3 injury of carotid arteries. Fib(AEK) mice exhibited a profound impediment in Staphylococcus aureus clearance following intraperitoneal infection similar to fibrinogen-deficient mice, yet Fib(AEK) mice displayed a significant infection dose-dependent survival advantage over fibrinogen-deficient mice following peritonitis challenge. Collectively, these findings establish for the first time that fibrin polymer is the molecular form critical for antimicrobial mechanisms while simultaneously highlighting biologically meaningful contributions and functions of the soluble molecule.

Mechanisms of fibrin polymerization and clinical implications

Research on all stages of fibrin polymerization, using a variety of approaches including naturally occurring and recombinant variants of fibrinogen, x-ray crystallography, electron and light microscopy, and other biophysical approaches, has revealed aspects of the molecular mechanisms involved. The ordered sequence of fibrinopeptide release is essential for the knob-hole interactions that initiate oligomer formation and the subsequent formation of 2-stranded protofibrils. Calcium ions bound both strongly and weakly to fibrin(ogen) have been localized, and some aspects of their roles are beginning to be discovered. Much less is known about the mechanisms of the lateral aggregation of protofibrils and the subsequent branching to yield a 3-dimensional network, although the αC region and B:b knob-hole binding seem to enhance lateral aggregation. Much information now exists about variations in clot structure and properties because of genetic and acquired molecular variants, environmental factors, effects of various intravascular and extravascular cells, hydrodynamic flow, and some functional consequences. The mechanical and chemical stability of clots and thrombi are affected by both the structure of the fibrin network and cross-linking by plasma transglutaminase. There are important clinical consequences to all of these new findings that are relevant for the pathogenesis of diseases, prophylaxis, diagnosis, and treatment.

Multiscale model of fibrin accumulation on the blood clot surface and platelet dynamics

A multiscale computational model of thrombus (blood clot) development is extended by incorporating a submodel describing formation of fibrin network through "fibrin elements" representing regions occupied by polymerized fibrin. Simulations demonstrate that fibrin accumulates on the surface of the thrombus and that fibrin network limits growth by reducing thrombin concentrations on the thrombus surface and decreasing adhesivity of resting platelets in blood near thrombus surface. These results suggest that fibrin accumulation may not only increase the structural integrity of the thrombus but also considerably contribute toward limiting its growth. Also, a fast Graphics Processing Unit implementation is described for a multiscale computational model of the platelet-blood flow interaction.

Substitution of the human αC region with the analogous chicken domain generates a fibrinogen with severely impaired lateral aggregation: fibrin monomers assemble into protofibrils but protofibrils do not assemble into fibers

Fibrin polymerization occurs in two steps: the assembly of fibrin monomers into protofibrils and the lateral aggregation of protofibrils into fibers. Here we describe a novel fibrinogen that apparently impairs only lateral aggregation. This variant is a hybrid, where the human αC region has been replaced with the homologous chicken region. Several experiments indicate this hybrid human-chicken (HC) fibrinogen has an overall structure similar to normal. Thrombin-catalyzed fibrinopeptide release from HC fibrinogen was normal. Plasmin digests of HC fibrinogen produced fragments that were similar to normal D and E; further, as with normal fibrinogen, the knob 'A' peptide, GPRP, reversed the plasmin cleavage associated with addition of EDTA. Dynamic light scattering and turbidity studies with HC fibrinogen showed polymerization was not normal. Whereas early small increases in hydrodynamic radius and absorbance paralleled the increases seen during the assembly of normal protofibrils, HC fibrinogen showed no dramatic increase in scattering as observed with normal lateral aggregation. To determine whether HC and normal fibrinogen could form a copolymer, we examined mixtures of these. Polymerization of normal fibrinogen was markedly changed by HC fibrinogen, as expected for mixed polymers. When the mixture contained 0.45 μM normal and 0.15 μM HC fibrinogen, the initiation of lateral aggregation was delayed and the final fiber size was reduced relative to normal fibrinogen at 0.45 μM. Considered altogether, our data suggest that HC fibrin monomers can assemble into protofibrils or protofibril-like structures, but these either cannot assemble into fibers or assemble into very thin fibers.

Streptococcal M1 protein constructs a pathological host fibrinogen network

M1 protein, a major virulence factor of the leading invasive strain of group A Streptococcus, is sufficient to induce toxic shock-like vascular leakage and tissue injury. These events are triggered by the formation of a complex between M1 and fibrinogen (Fg) that, unlike M1 or Fg alone, leads to neutrophil activation. Here we provide a structural explanation for the pathological properties of the M1-Fg complex. A conformationally dynamic coiled-coil dimer of M1 was found to organize four Fg molecules into a specific cross-like pattern. This pattern supported the construction of a supramolecular network that was required for neutrophil activation but was distinct from a fibrin clot. Disruption of this network into other supramolecular assemblies was not tolerated. These results have bearing on the pathophysiology of streptococcal toxic shock.

Molecular mechanisms affecting fibrin structure and stability

Fibrin structure and stability have been linked to many thrombotic diseases, including venous thromboembolism. Analysis of the molecular mechanisms that affect fibrin structure and stability became possible when the crystal structure of fibrinogen was solved. Biochemical studies of natural and recombinant variant fibrinogens have examined the interactions that mediate the conversion of soluble fibrinogen to the insoluble fibrin network. These studies identified intermolecular interactions that control fibrin structure, although some critical events remain ambiguous. Studies show that fibrin structure modulates the enzymatic lysis of the fibrin network, so the molecular mechanisms that control structure also control stability. Studies show that the mechanical stability of the fibrin clot depends on the properties of the fibrin monomer, leading investigators to explore the molecular basis of the monomer's mechanical properties. The work summarized here provides insights that might allow the development of pharmaceuticals and treatments to modulate fibrin structure and stability in vivo and thereby prevent or limit thrombotic disease.

Impaired protofibril formation in fibrinogen gamma N308K is due to altered D:D and "A:a" interactions

"A:a" knob-hole interactions and D:D interfacial interactions are important for fibrin polymerization. Previous studies with recombinant gammaN308K fibrinogen, a substitution at the D:D interface, showed impaired polymerization. We examined the molecular basis for this loss of function by solving the crystal structure of gammaN308K fragment D. In contrast to previous fragment D crystals, the gammaN308K crystals belonged to a tetragonal space group with an unusually long unit cell (a = b = 95 A, c = 448.3 A). Alignment of the normal and gammaN308K structures showed the global structure of the variant was not changed and the knob "A" peptide GPRP was bound as usual to hole "a". The substitution introduced an elongated positively charged patch in the D:D region. The structure showed novel, symmetric D:D crystal contacts between gammaN308K molecules, indicating the normal asymmetric D:D interface in fibrin would be unstable in this variant. We examined GPRP binding to gammaN308K in solution by plasmin protection assay. The results showed weaker peptide binding, suggesting that "A:a" interactions were altered. We examined fibrin network structures by scanning electron microscopy and found the variant fibers were thicker and more heterogeneous than normal fibers. Considered together, our structural and biochemical studies indicate both "A:a" and D:D interactions are weaker. We conclude that stable protofibrils cannot assemble from gammaN308K monomers, leading to impaired polymerization.