A Bayesian method for calculating real-time quantitative PCR calibration curves using absolute plasmid DNA standards

Quantitative fecal pollution assessment with bacterial, viral, and molecular methods in small stream tributaries

Stream water quality can be impacted by a myriad of fecal pollution sources and waste management practices. Identifying origins of fecal contamination can be challenging, especially in high order streams where water samples are influenced by pollution from large drainage areas. Strategic monitoring of tributaries can be an effective strategy to identify conditions that influence local water quality. Water quality is assessed using fecal indicator bacteria (FIB); however, FIB cannot differentiate sources of fecal contamination nor indicate the presence of disease-causing viruses. Under different land use scenarios, three small stream catchments were investigated under 'wet' and 'dry' conditions (Scenario 1: heavy residential; Scenario 2: rural residential; and Scenario 3: undeveloped/agricultural). To identify fecal pollution trends, host-associated genetic targets HF183/BacR287 (human), Rum2Bac (ruminant), GFD (avian), and DG3 (canine) were analyzed along with FIB (Escherichia coli and enterococci), viral indicators (somatic and F+ coliphage), six general water quality parameters, and local rainfall. Levels of E. coli exceeded single sample maximum limits (235 CFU/100 mL) in 70.7 % of samples, enterococci (70 CFU/100 mL) in 100 % of samples, and somatic coliphage exceeded advisory thresholds (600 PFU/L) in 34.1 % of samples. The detection frequency for the human-associated genetic marker was highest in Scenario 3 (50 % of samples) followed by Scenario 2 (46 %), while the ruminant-associated marker was most prevalent in Scenario 1 (64 %). Due to the high proportion of qPCR-based measurements below the limit of quantification, a Bayesian data analysis approach was applied to investigate links between host-associated genetic marker occurrence with that of rainfall and fecal indicator levels. Multiple trends associated with small stream monitoring were revealed, emphasizing the role of rainfall, the utility of fecal source information to improve water quality management. And furthermore, water quality monitoring with bacterial or viral methodologies can alter the interpretation of fecal pollution sources in impaired waters.

Quantitative fecal source characterization of urban municipal storm sewer system outfall 'wet' and 'dry' weather discharges

Urban areas are built environments containing substantial amounts of impervious surfaces (e.g., streets, sidewalks, roof tops). These areas often include elaborately engineered drainage networks designed to collect, transport, and discharge untreated stormwater into local surface waters. When left uncontrolled, these discharges may contain unsafe levels of fecal waste from sources such as sanitary sewage and wildlife even under dry weather conditions. This study evaluates paired measurements of host-associated genetic markers (log10 copies per reaction) indicative of human (HF183/BacR287 and HumM2), ruminant (Rum2Bac), canine (DG3), and avian (GFD) fecal sources, 12-hour cumulative precipitation (mm), four catchment land use metrics determined by global information system (GIS) mapping, and Escherichia coli (MPN/100 ml) from seven municipal separate storm sewer system outfall locations situated at the southern portion of the Anacostia River Watershed (District of Columbia, U.S.A.). A total of 231 discharge samples were collected twice per month (n = 24 sampling days) and after rain events (n = 9) over a 13-month period. Approximately 50 % of samples (n = 116) were impaired, exceeding the local E. coli single sample maximum of 2.613 log10 MPN/100 ml. Genetic quality controls indicated the absence of amplification inhibition in 97.8 % of samples, however 14.7 % (n = 34) samples showed bias in DNA recovery. Of eligible samples, quantifiable levels were observed for avian (84.1 %), human (57.4 % for HF183/BacR287 and 40 % for HumM2), canine (46.7 %), and ruminant (15.9 %) host-associated genetic markers. Potential links between paired measurements are explored with a recently developed Bayesian qPCR censored data analysis approach. Findings indicate that human, pet, and urban wildlife all contribute to storm outfall discharge water quality in the District of Columbia, but pollutant source contributions vary based on 'wet' and 'dry' conditions and catchment land use, demonstrating that genetic-based fecal source identification methods combined with GIS land use mapping can complement routine E. coli monitoring to improve stormwater management in urban areas.

A fecal score approximation model for analysis of real-time quantitative PCR fecal source identification measurements

Numerous qPCR-based methods are available to estimate the concentration of fecal pollution sources in surface waters. However, qPCR fecal source identification data sets often include a high proportion of non-detections (reactions failing to attain a prespecified minimal signal intensity for detection) and measurements below the assay lower limit of quantification (minimal signal intensity required to estimate target concentration), making it challenging to interpret results in a quantitative manner while accounting for error. In response, a Bayesian statistic based Fecal Score (FS) approach was developed that estimates the weighted average concentration of a fecal source identification genetic marker across a defined group of samples, mathematically incorporating qPCR measurements from all samples. Yet, implementation is technically demanding and computationally intensive requiring specialized training, the use of expert software, and access to high performance computing. To address these limitations, this study reports a novel approximation model for FS determination based on a frequentist approach. The performance of the Bayesian and Frequentist models are compared using fecal source identification qPCR data representative of different 'censored' data scenarios from a recently published study focusing on the impact of stormwater discharge in urban streams. In addition, data set eligibility recommendations for the responsible use of these models are presented. Findings indicate that the Frequentist model can generate similar average concentrations and uncertainty estimates for FS, compared to the original Bayesian approach. The Frequentist model should make calculations less computationally and technically intensive, allowing for the development of easier to use data analysis tools for fecal source identification applications.

Paranannizziopsis spp. infections in wild snakes and a qPCR assay for detection of the fungus

The emergence of ophidiomycosis (or snake fungal disease) in snakes has prompted increased awareness of the potential effects of fungal infections on wild reptile populations. Yet, aside from Ophidiomyces ophidiicola, little is known about other mycoses affecting wild reptiles. The closely related genus Paranannizziopsis has been associated with dermatomycosis in snakes and tuataras in captive collections, and P. australasiensis was recently identified as the cause of skin infections in non-native wild panther chameleons (Furcifer pardalis) in Florida, USA. Here we describe five cases of Paranannizziopsis spp. associated with skin lesions in wild snakes in North America and one additional case from a captive snake from Connecticut, USA. In addition to demonstrating that wild Nearctic snakes can serve as a host for these fungi, we also provide evidence that the genus Paranannizziopsis is widespread in wild snakes, with cases being identified in Louisiana (USA), Minnesota (USA), Virginia (USA), and British Columbia (Canada). Phylogenetic analyses conducted on multiple loci of the fungal strains we isolated identified P. australasiensis in Louisiana and Virginia; the remaining strains from Minnesota and British Columbia did not cluster with any of the described species of Paranannizziopsis, although the strains from British Columbia appear to represent a single lineage. Finally, we designed a pan-Paranannizziopsis real-time PCR assay targeting the internal transcribed spacer region 2. This assay successfully detected DNA of all described species of Paranannizziopsis and the two potentially novel taxa isolated in this study and did not cross-react with closely related fungi or other fungi commonly found on the skin of snakes. The assay was 100% sensitive and specific when screening clinical (skin tissue or skin swab) samples, although full determination of the assay's performance will require additional follow up due to the small number of clinical samples (n = 14 from 11 snakes) available for testing in our study. Nonetheless, the PCR assay can provide an important tool in further investigating the prevalence, distribution, and host range of Paranannizziopsis spp. and facilitate more rapid diagnosis of Paranannizziopsis spp. infections that are otherwise difficult to differentiate from other dermatomycoses.

Biogeographical patterns of the soil fungal:bacterial ratio across France

Soils are one of the major reservoirs of biological diversity on our planet because they host a huge richness of microorganisms. The fungal:bacterial (F:B) ratio targets two major functional groups of organisms in soils and can improve our understanding of their importance and efficiency for soil functioning. To better decipher the variability of this ratio and rank the environmental parameters involved, we used the French Soil Quality Monitoring Network (RMQS)-one of the most extensive and a priori-free soil sampling surveys, based on a systematic 16 km × 16 km grid and including more than 2,100 samples. F:B ratios, measured by quantitative PCR targeting the 18S and 16S rDNA genes, turned out to be heterogenously distributed and spatially structured in geographical patterns across France. These distribution patterns differed from bacterial or fungal densities taken separately, supporting the hypothesis that the F:B ratio is not the mere addition of each density but rather results from the complex interactions of the two functional groups. The F:B ratios were mainly influenced by soil characteristics and land management. Among soil characteristics, the pH and, to a lesser extent, the organic carbon content and the carbon:nitrogen (C:N) ratio were the main drivers. These results improved our understanding of soil microbial communities, and from an operational point of view, they suggested that the F:B ratio should be a useful new bioindicator of soil status. The resulting dataset can be considered as a first step toward building up a robust repository essential to any bioindicator and aimed at guiding and helping decision making. IMPORTANCE In the face of human disturbances, microbial activity can be impacted and, e.g., can result in the release of large amounts of soil carbon into the atmosphere, with global impacts on temperature. Therefore, the development and the regular use of soil bioindicators are essential to (i) improve our knowledge of soil microbial communities and (ii) guide and help decision makers define suitable soil management strategies. Bacterial and fungal communities are key players in soil organic matter turnover, but with distinct physiological and ecological characteristics. The fungal:bacterial ratio targets these two major functional groups by investigating their presence and their equilibrium. The aim of our study is to characterize this ratio at a territorial scale and rank the environmental parameters involved so as to further develop a robust repository essential to the interpretation of any bioindicator of soil quality.

Genetic fecal source identification in urban streams impacted by municipal separate storm sewer system discharges

Municipal stormwater systems are designed to collect, transport, and discharge precipitation from a defined catchment area into local surface waters. However, these discharges may contain unsafe levels of fecal waste. Paired measurements of Escherichia coli, precipitation, three land use metrics determined by geographic information system (GIS) mapping, and host-associated genetic markers indicative of human (HF183/BacR287 and HumM2), ruminant (Rum2Bac), dog (DG3), and avian (GFD) fecal sources were assessed in 231 urban stream samples impacted by two or more municipal stormwater outfalls. Receiving water samples were collected twice per month (n = 24) and after rain events (n = 9) from seven headwaters of the Anacostia River in the District of Columbia (United States) exhibiting a gradient of impervious surface, residential, and park surface areas. Almost 50% of stream samples (n = 103) were impaired, exceeding the local E. coli single sample maximum assessment level (410 MPN/100 ml). Fecal scores (average log10 copies per 100 ml) were determined to prioritize sites by pollution source and to evaluate potential links with land use, rainfall, and E. coli levels using a recently developed censored data analysis approach. Dog, ruminant, and avian fecal scores were almost always significantly increased after rain or when E. coli levels exceeded the local benchmark. Human fecal pollution trends showed the greatest variability with detections ranging from 9.1% to 96.7% across sites. Avian fecal scores exhibited the closest connection to land use, significantly increasing in catchments with larger residential areas after rain events (p = 0.038; R2 = 0.62). Overall, results demonstrate that combining genetic fecal source identification methods with GIS mapping complements routine E. coli monitoring to improve management of urban streams impacted by stormwater outfalls.

Interlaboratory performance and quantitative PCR data acceptance metrics for NIST SRM® 2917

Surface water quality quantitative polymerase chain reaction (qPCR) technologies are expanding from a subject of research to routine environmental and public health laboratory testing. Readily available, reliable reference material is needed to interpret qPCR measurements, particularly across laboratories. Standard Reference Material® 2917 (NIST SRM® 2917) is a DNA plasmid construct that functions with multiple water quality qPCR assays allowing for estimation of total fecal pollution and identification of key fecal sources. This study investigates SRM 2917 interlaboratory performance based on repeated measures of 12 qPCR assays by 14 laboratories (n = 1008 instrument runs). Using a Bayesian approach, single-instrument run data are combined to generate assay-specific global calibration models allowing for characterization of within- and between-lab variability. Comparable data sets generated by two additional laboratories are used to assess new SRM 2917 data acceptance metrics. SRM 2917 allows for reproducible single-instrument run calibration models across laboratories, regardless of qPCR assay. In addition, global models offer multiple data acceptance metric options that future users can employ to minimize variability, improve comparability of data across laboratories, and increase confidence in qPCR measurements.

Developing a novel Bifidobacterium phage quantitative polymerase chain reaction-based assay for tracking untreated wastewater

Microbial source tracking (MST) tools provide insights on fecal pollution levels in aquatic environments using predominantly quantitative PCR (qPCR) assays that target host-associated molecular marker genes. Existing wastewater-associated marker genes have shown limited or significant cross-reactions with non-human fecal samples. In this study, we mined the current Gut Phage Database (GPD) and designed a novel untreated wastewater-specific Bifidobacterium phage qPCR assay (i.e., Bifi assay). The sensitivity and specificity of the Bifi marker genes were assessed by collectively analyzing untreated (n = 33) and treated (n = 15) wastewater and non-human fecal samples (i.e., Rabbit, mouse, cow, horse, pig, chicken, sheep, dog, deer, kangaroos; n = 113) in Shenzhen, Guangdong Province, China and Brisbane, Australia. Bifi assay revealed 100% host-specificity against non-human fecal samples collected from Shenzhen and Brisbane. Furthermore, this marker gene was also detected in all untreated and treated wastewater samples, whose concentrations ranged from 5.54 to 6.83 log₁₀ GC/L. In Shenzhen, the concentrations of Bifi marker gene were approximately two orders of magnitude lower than Bacteroides (HF183/BacR287 assay) and CrAssphage (CPQ_56 assay). The concentration of Bifi marker gene in untreated wastewater from Brisbane was 1.35 log₁₀ greater than those in Shenzhen. Our results suggest that Bifi marker gene has the potential to detect and quantify the levels of human fecal pollution in Shenzhen and Brisbane. If additional detection sensitivity is required for environmental studies, Bifi marker gene should be paired with either CrAssphage or HF183/BacR287 marker genes.

Performance of NIST SRM® 2917 with 13 recreational water quality monitoring qPCR assays

Fecal pollution remains a significant challenge for recreational water quality management worldwide. In response, there is a growing interest in the use of real-time quantitative PCR (qPCR) methods to achieve same-day notification of recreational water quality and associated public health risk as well as to characterize fecal pollution sources for targeted mitigation. However, successful widespread implementation of these technologies requires the development of and access to a high-quality standard control material. Here, we report a single laboratory qPCR performance assessment of the National Institute of Standards and Technology Standard Reference Material 2917 (NIST SRM® 2917), a linearized plasmid DNA construct that functions with 13 recreational water quality qPCR assays. Performance experiments indicate the generation of standard curves with amplification efficiencies ranging from 0.95 ± 0.006 to 0.99 ± 0.008 and coefficient of determination values (R2) ≥ 0.980. Regardless of qPCR assay, variability in repeated measurements at each dilution level were very low (quantification threshold standard deviations ≤ 0.657) and exhibited a heteroscedastic trend characteristic of qPCR standard curves. The influence of a yeast carrier tRNA added to the standard control material buffer was also investigated. Findings demonstrated that NIST SRM® 2917 functions with all qPCR methods and suggests that the future use of this control material by scientists and water quality managers should help reduce variability in concentration estimates and make results more consistent between laboratories.

Whey allergens: Influence of nonthermal processing treatments and their detection methods

Whey and its components are recognized as value-added ingredients in infant formulas, beverages, sports nutritious foods, and other food products. Whey offers opportunities for the food industrial sector to develop functional foods with potential health benefits due to its unique physiological and functional attributes. Despite all the above importance, the consumption of whey protein (WP) can trigger hypersensitive reactions and is a constant threat for sensitive individuals. Although avoiding such food products is the most successful approach, there is still a chance of incorrect labeling and cross-contamination during food processing. As whey allergens in food products are cross-reactive, the phenomenon of homologous milk proteins of various species may escalate to a more serious problem. In this review, nonthermal processing technologies used to prevent and eliminate WP allergies are presented and discussed in detail. These processing technologies can either enhance or mitigate the impact of potential allergenicity. Therefore, the development of highly precise analytical technologies to detect and quantify the existence of whey allergens is of considerable importance. The present review is an attempt to cover all the updated approaches used for the detection of whey allergens in processed food products. Immunological and DNA-based assays are generally used for detecting allergenic proteins in processed food products. In addition, mass spectrometry is also employed as a preliminary technique for detection. We also highlighted the latest improvements in allergen detection toward biosensing strategies particularly immunosensors and aptasensors.

Large-scale comparison of E. coli levels determined by culture and a qPCR method (EPA Draft Method C) in Michigan towards the implementation of rapid, multi-site beach testing

Fecal pollution remains a challenge for water quality managers at Great Lakes and inland recreational beaches. The fecal indicator of choice at these beaches is typically Escherichia coli (E. coli), determined by culture-based methods that require over 18 h to obtain results. Researchers at the United States Environmental Protection Agency (EPA) have developed a rapid E. coli qPCR methodology (EPA Draft Method C) that can provide same-day results for improving public health protection with demonstrated sensitivity, specificity, and data acceptance criteria. However, limited information is currently available to compare the occurrence of E. coli determined by cultivation and by EPA Draft Method C (Method C). This study provides a large-scale data collection effort to compare the occurrence of E. coli determined by these alternative methods at more than 100 Michigan recreational beach and other sites using the complete set of quantitative data pairings and selected subsets of the data and sites meeting various eligibility requirements. Simple linear regression analyses of composite (pooled) data indicated a correlation between results of the E. coli monitoring approaches for each of the multi-site datasets as evidenced by Pearson R-squared values ranging from 0.452 to 0.641. Theoretical Method C threshold values, expressed as mean log10 target gene copies per reaction, that corresponded to an established E. coli culture method water quality standard of 300 MPN or CFU /100 mL varied only from 1.817 to 1.908 for the different datasets using this model. Different modeling and derivation approaches that incorporated within and between-site variability in the estimates also gave Method C threshold values in this range but only when relatively well-correlated datasets were used to minimize the error. A hypothetical exercise to evaluate the frequency of water impairments based on theoretical qPCR thresholds corresponding to the E. coli water quality standard for culture methods suggested that the methods may provide the same beach notification outcomes over 90% of the time with Method C results differing from culture method results that indicated acceptable and unacceptable water quality at overall rates of 1.9% and 6.6%, respectively. Results from this study provide useful information about the relationships between E. coli determined by culture and qPCR methods across many diverse freshwater sites and should facilitate efforts to implement qPCR-based E. coli detection for rapid recreational water quality monitoring on a large scale in the State of Michigan.

Variable fecal source prioritization in recreational waters routinely monitored with viral and bacterial general indicators

Somatic and F+ coliphage methods are under consideration as potential routine surface water quality monitoring tools to identify unsafe levels of fecal pollution in recreational waters. However, little is known about the cooccurrence of these virus-based fecal indicators and host-associated genetic markers used to prioritize key pollution sources for remediation. In this study, paired measurements of cultivated coliphage (somatic and F+) and bacterial (E. coli and enterococci) general fecal indicators and genetic markers indicative of human (HF183/BacR287 and HumM2), ruminant (Rum2Bac), canine (DG3), and avian (GFD) fecal pollution sources were assessed in 365 water samples collected from six Great Lakes Basin beach and river sites over a 15-week recreational season. Water samples were organized into groups based on defined viral and bacterial fecal indicator water quality thresholds and average log10 host-associated genetic marker fecal score ratios were estimated to compare pollutant source inferences based on variable routine water quality monitoring practices. Eligible log10 fecal score ratios ranged from -0.051 (F+ coliphage, GFD) to 2.08 (enterococci, Rum2Bac). Using a fecal score ratio approach, findings suggest that general fecal indicator selection for routine water quality monitoring can influence the interpretation of host-associated genetic marker measurements, in some cases, prioritizing different pollutant sources for remediation. Variable trends were also observed between Great Lake beach and river sites suggesting disparate management practices may be useful for each water type.

The current state of Bayesian methods in nonclinical pharmaceutical statistics: Survey results and recommendations from the DIA/ASA-BIOP Nonclinical Bayesian Working Group

The use of Bayesian methods to support pharmaceutical product development has grown in recent years. In clinical statistics, the drive to provide faster access for patients to medical treatments has led to a heightened focus by industry and regulatory authorities on innovative clinical trial designs, including those that apply Bayesian methods. In nonclinical statistics, Bayesian applications have also made advances. However, they have been embraced far more slowly in the nonclinical area than in the clinical counterpart. In this article, we explore some of the reasons for this slower rate of adoption. We also present the results of a survey conducted for the purpose of understanding the current state of Bayesian application in nonclinical areas and for identifying areas of priority for the DIA/ASA-BIOP Nonclinical Bayesian Working Group. The survey explored current usage, hurdles, perceptions, and training needs for Bayesian methods among nonclinical statisticians. Based on the survey results, a set of recommendations is provided to help guide the future advancement of Bayesian applications in nonclinical pharmaceutical statistics.

Fecal pollution source characterization at non-point source impacted beaches under dry and wet weather conditions

Though Lake Michigan beaches in Chicago are not impacted by stormwater or wastewater outfalls, several of those beaches often exceed USEPA Beach Action Values (BAVs). We investigated the role of microbial source tracking (MST) as a complement to routine beach monitoring at Chicago beaches. In summer 2016, water samples from nine Chicago beaches were analyzed for E. coli by culture and enterococci by qPCR. A total of 195 archived samples were then tested for human (HF183/BacR287, HumM2), canine (DG3, DG37), and avian (GFD) microbial source tracking (MST) markers. Associations between MST and general fecal indicator bacteria (FIB) measures were evaluated and stratified based on wet and dry weather definitions. Among the 195 samples, HF183/BacR287 was quantifiable in 4%, HumM2 in 1%, DG3 in 6%, DG37 in 2%, and GFD in 23%. The one beach with a dog area was far more likely to have DG3 present in the quantifiable range than other beaches. Exceedance of general FIB BAVs increased the odds of human, dog and avian marker detection. MST marker weighted-average fecal scores for DG3 was 2.4 times, DG37 was 2.1 times, and GFD was 1.6 times higher during wet compared to dry weather conditions. HF183/BacR287 weighted-average fecal scores were not associated with precipitation. Associations between FIB BAV exceedance and MST marker detection were generally stronger in wet weather. Incorporating MST testing into routine beach water monitoring can provide information that beach managers can use when developing protection plans for beaches not impacted by point sources.

Gene Expression and Photophysiological Changes in Pocillopora acuta Coral Holobiont Following Heat Stress and Recovery

The ability of corals to withstand changes in their surroundings is a critical survival mechanism for coping with environmental stress. While many studies have examined responses of the coral holobiont to stressful conditions, its capacity to reverse responses and recover when the stressor is removed is not well-understood. In this study, we investigated among-colony responses of Pocillopora acuta from two sites with differing distance to the mainland (Kusu (closer to the mainland) and Raffles Lighthouse (further from the mainland)) to heat stress through differential expression analysis of target genes and quantification of photophysiological metrics. We then examined how these attributes were regulated after the stressor was removed to assess the recovery potential of P. acuta. The fragments that were subjected to heat stress (2 °C above ambient levels) generally exhibited significant reduction in their endosymbiont densities, but the extent of recovery following stress removal varied depending on natal site and colony. There were minimal changes in chl a concentration and maximum quantum yield (Fv/Fm, the proportion of variable fluorescence (Fv) to maximum fluorescence (Fm)) in heat-stressed corals, suggesting that the algal endosymbionts’ Photosystem II was not severely compromised. Significant changes in gene expression levels of selected genes of interest (GOI) were observed following heat exposure and stress removal among sites and colonies, including Actin, calcium/calmodulin-dependent protein kinase type IV (Camk4), kinesin-like protein (KIF9), and small heat shock protein 16.1 (Hsp16.1). The most responsive GOIs were Actin, a major component of the cytoskeleton, and the adaptive immune-related Camk4 which both showed significant reduction following heat exposure and subsequent upregulation during the recovery phase. Our findings clearly demonstrate specific responses of P. acuta in both photophysiological attributes and gene expression levels, suggesting differential capacity of P. acuta corals to tolerate heat stress depending on the colony, so that certain colonies may be more resilient than others.

Effect of Quantitative Polymerase Chain Reaction Data Analysis Using Sample Amplification Efficiency on Microbial Source Tracking Assay Performance and Source Attribution

The widely used microbial source tracking (MST) technique, quantitative polymerase chain reaction (qPCR), quantifies host-specific gene abundance in polluted water to identify and prioritize contamination sources. This study characterized the effects of a qPCR data analysis using the sample PCR efficiencies (the LinRegPCR model) on gene abundance and compared them with the standard curve-based method (the mixed model). Five qPCR assays were evaluated: the universal GenBac3, human-specific HF183/BFDrev and CPQ_056, swine-specific Pig-2-Bac, and cattle-specific Bac3qPCR assays. The LinRegPCR model increased the low-copy amplification, especially in the HF183/BFDrev assay, thus lowering the specificity to 0.34. Up to 1.41 log₁₀ copies/g and 0.41 log₁₀ copies/100 mL differences were observed for composite fecal and sewage samples (n = 147) by the LinRegPCR approach, corresponding to an 18.2% increase and 6.4% decrease, respectively. Freshwater samples (n = 48) demonstrated a maximum of 1.95 log₁₀ copies/100 mL difference between the two models. Identical attributing sources by both models were shown in 54.55% of environmental samples; meanwhile, the LinRegPCR approach improved the inability to identify sources by the mixed model in 29.55% of the samples. This study emphasizes the need for a standardized data analysis protocol for qPCR MST assays for interlaboratory consistency and comparability.

Discordance for genotypic sex in phenotypic female Atlantic salmon (Salmo salar) is related to a reduced sdY copy number

The master sex determinant in rainbow trout (Oncorhynchus mykiss), sexually dimorphic on the Y chromosome (sdY), is strongly but not perfectly associated with male phenotype in several other species from the family Salmonidae. Currently, the cause and implications of discordance for sdY-predicted genotypic sex and phenotypic sex in these species is unclear. Using an established multiplex PCR test for exons 2 and 3 of sdY, we demonstrated that sdY-predicted genotypic sex was discordant with histologically evidenced phenotypic sex in 4% of 176 Tasmanian Atlantic salmon. All discordant individuals were phenotypic females presenting a male genotype. Using real-time qPCR assays that we developed and validated for exons 2, 3 and 4 of sdY, all genotype-phenotype discordant females were confirmed to possess sdY, albeit at a reduced number of copies when compared to phenotypic males. The real-time qPCR assays also demonstrated reduced levels of sdY in 30% of phenotypic females that the established multiplex PCR-based test indicated to be devoid of sdY. These findings suggest sdY may be reduced in copy number or mosaicked in the genomic DNA of sdY-positive phenotypic female Atlantic salmon and highlight the importance of understanding the effects of reduced sdY copies on the development of phenotypic sex.

Human fecal contamination of water, soil, and surfaces in households sharing poor-quality sanitation facilities in Maputo, Mozambique

Identifying the origin of fecal contamination can support more effective interventions to interrupt enteric pathogen transmission. Microbial source tracking (MST) assays may help to identify environmental routes of pathogen transmission although these assays have performed poorly in highly contaminated domestic settings, highlighting the importance of both diagnostic validation and understanding the context-specific ecological, physical, and sociodemographic factors driving the spread of fecal contamination. We assessed fecal contamination of compounds (clusters of 2-10 households that share sanitation facilities) in low-income neighborhoods of urban Maputo, Mozambique, using a set of MST assays that were validated with animal stool and latrine sludge from study compounds. We sampled five environmental compartments involved in fecal microbe transmission and exposure: compound water source, household stored water and food preparation surfaces, and soil from the entrance to the compound latrine and the entrances to each household. Each sample was analyzed by culture for the general fecal indicator Escherichia coli (cEC) and by real-time PCR for the E. coli molecular marker EC23S857, human-associated markers HF183/BacR287 and Mnif, and GFD, an avian-associated marker. We collected 366 samples from 94 households in 58 compounds. At least one microbial target (indicator organism or marker gene) was detected in 96% of samples (353/366), with both E. coli targets present in the majority of samples (78%). Human targets were frequently detected in soils (59%) and occasionally in stored water (17%) but seldom in source water or on food surfaces. The avian target GFD was rarely detected in any sample type but was most common in soils (4%). To identify risk factors of fecal contamination, we estimated associations with sociodemographic, meteorological, and physical sample characteristics for each microbial target and sample type combination using Bayesian censored regression for target concentration responses and Bayesian logistic regression for target detection status. Associations with risk factors were generally weak and often differed in direction between different targets and sample types, though relationships were somewhat more consistent for physical sample characteristics. Wet soils were associated with elevated concentrations of cEC and EC23S857 and odds of detecting HF183. Water storage container characteristics that expose the contents to potential contact with hands and other objects were weakly associated with human target detection. Our results describe a setting impacted by pervasive domestic fecal contamination, including from human sources, that was largely disconnected from the observed variation in socioeconomic and sanitary conditions. This pattern suggests that in such highly contaminated settings, transformational changes to the community environment may be required before meaningful impacts on fecal contamination can be realized.

Simplified Analysis of Measurement Data from A Rapid E. coli qPCR Method (EPA Draft Method C) Using A Standardized Excel Workbook

Draft method C is a standardized method for quantifying E. coli densities in recreational waters using quantitative polymerase chain reaction (qPCR). The method includes a Microsoft Excel workbook that automatically screens for poor-quality data using a set of previously proposed acceptance criteria, generates weighted linear regression (WLR) composite standard curves, and calculates E. coli target gene copies in test samples. We compared standard curve parameter values and test sample results calculated with the WLR model to those from a Bayesian master standard curve (MSC) model using data from a previous multi-lab study. The two models' mean intercept and slope estimates from twenty labs' standard curves were within each other's 95% credible or confidence intervals for all labs. E. coli gene copy estimates of six water samples analyzed by eight labs were highly overlapping among labs when quantified with the WLR and MSC models. Finally, we compared multiple labs' 2016-2018 composite curves, comprised of data from individual curves where acceptance criteria were not used, to their corresponding composite curves with passing acceptance criteria. Composite curves developed from passing individual curves had intercept and slope 95% confidence intervals that were often narrower than without screening and an analysis of covariance test was passed more often. The Excel workbook WLR calculation and acceptance criteria will help laboratories implement draft method C for recreational water analysis in an efficient, cost-effective, and reliable manner.

Large-scale implementation of standardized quantitative real-time PCR fecal source identification procedures in the Tillamook Bay Watershed

Fecal pollution management remains one of the biggest challenges for water quality authorities worldwide. Advanced fecal pollution source identification technologies are now available that can provide quantitative information from many animal groups. As public interest in these methodologies grows, it is vital to use standardized procedures with clearly defined data acceptance metrics and conduct field studies demonstrating the use of these techniques to help resolve real-world water quality challenges. Here we apply recently standardized human-associated qPCR methods with custom data acceptance metrics (HF183/BacR287 and HumM2), along with established procedures for ruminant (Rum2Bac), cattle (CowM2 and CowM3), canine (DG3 and DG37), and avian (GFD) fecal pollution sources to (i) demonstrate the feasibility of implementing standardized qPCR procedures in a large-scale field study, and (ii) characterize trends in fecal pollution sources in the research area. A total of 602 water samples were collected over a one-year period at 29 sites along the Trask, Kilchis, and Tillamook rivers and tributaries in the Tillamook Bay Watershed (OR, USA). Host-associated qPCR results were combined with high-resolution geographic information system (GIS) land use and general indicator bacteria (E. coli) measurements to elucidate water quality fecal pollution trends. Results demonstrate the feasibility of implementing standardized fecal source identification qPCR methods with established data acceptance metrics in a large-scale field study leading to new investigative leads suggesting that elevated E. coli levels may be linked to specific pollution sources and land use activities in the Tillamook Bay Watershed.

Extended persistence of general and cattle-associated fecal indicators in marine and freshwater environment

Fecal contamination of recreational waters with cattle manure can pose a risk to public health due to the potential presence of various zoonotic pathogens. Fecal indicator bacteria (FIB) have a long history of use in the assessment of recreational water quality, but FIB quantification provides no information about pollution sources. Microbial source tracking (MST) markers have been developed in response to a need to identify pollution sources, yet factors that influence their decay in ambient waters are often poorly understood. We investigated the influence of water type (freshwater versus marine) and select environmental parameters (indigenous microbiota, ambient sunlight) on the decay of FIB and MST markers originating from cattle manure. Experiments were conducted in situ using a submersible aquatic mesocosm containing dialysis bags filled with a mixture of cattle manure and ambient water. Culturable FIB (E. coli, enterococci) were enumerated by membrane filtration and general fecal indicator bacteria (GenBac3, Entero1a, EC23S857) and MST markers (Rum2Bac, CowM2, CowM3) were estimated by qPCR. Water type was the most significant factor influencing decay (three-way ANOVA, p: 0.006 to <0.001), although the magnitude of the effect differed among microbial targets and over time. The presence of indigenous microbiota and exposure to sunlight were significantly correlated (three-way ANOVA, p: 0.044 to <0.001) with decay of enterococci and CowM2, while E. coli, EC23S857, Rum2Bac, and CowM3 (three-way ANOVA, p: 0.044 < 0.001) were significantly impacted by sunlight or indigenous microbiota. Results indicate extended persistence of both cultivated FIB and genetic markers in marine and freshwater water types. Findings suggest that multiple environmental stressors are important determinants of FIB and MST marker persistence, but their magnitude can vary across indicators. Selective exclusion of natural aquatic microbiota and/or sunlight typically resulted in extended survival, but the effect was minor and limited to select microbial targets.

Evidence of Genetic Fecal Marker Interactions between Water Column and Periphyton in Artificial Streams

Periphyton is a complex mixture of algae, microbes, inorganic sediment, and organic matter that is attached to submerged surfaces in most flowing freshwater systems. This natural community is known to absorb pollutants from the water column, resulting in improved water quality. However, the role of periphyton in the fate and transport of genetic fecal markers suspended in the water column remains unclear. As application of genetic-based methodologies continues to increase in freshwater settings, it is important to identify any interactions that could potentially confound water quality interpretations. A 16 week indoor mesocosm study was conducted to simultaneously measure genetic fecal markers in the water column and in the associated periphyton when subject to wastewater source loading. Treated wastewater effluent was pumped directly from a treatment facility adjacent to the experimental stream facility. Inflow and outflow surface water grabs were paired with the collection of periphyton samples taken from the mesocosm substrates on a weekly basis. Samples were analyzed with three genetic fecal indicator quantitative real-time polymerase chain reaction assays targeting Escherichia coli (EC23S857), enterococci (Entero1), and Bacteroidales (GenBac3), as well as, two human host-associated fecal pollution markers (HF183 and HumM2). In addition, periphyton dry mass was measured. During wastewater effluent loading, genetic markers were detected in periphyton at frequencies up to 100% (EC23S857, Entero1, and GenBac3), 59.4% (HF183), and 21.9% (HumM2) confirming sequestration from the water column. Mean net-flux shifts in water column inflow and outflow genetic indicator concentrations further supported interactions between the periphyton and water column. In addition, positive correlations were observed between periphyton dry mass and genetic marker concentrations ranging from r = 0.693 (Entero1) to r = 0.911 (GenBac3). Overall, findings support the notion that genetic markers suspended in the water column can be trapped by periphyton, further suggesting that the benthic environment in flowing freshwater systems may be an important factor to consider for water quality management with molecular methods.

Estimating virus occurrence using Bayesian modeling in multiple drinking water systems of the United States

Drinking water treatment plants rely on purification of contaminated source waters to provide communities with potable water. One group of possible contaminants are enteric viruses. Measurement of viral quantities in environmental water systems are often performed using polymerase chain reaction (PCR) or quantitative PCR (qPCR). However, true values may be underestimated due to challenges involved in a multi-step viral concentration process and due to PCR inhibition. In this study, water samples were concentrated from 25 drinking water treatment plants (DWTPs) across the US to study the occurrence of enteric viruses in source water and removal after treatment. The five different types of viruses studied were adenovirus, norovirus GI, norovirus GII, enterovirus, and polyomavirus. Quantitative PCR was performed on all samples to determine presence or absence of these viruses in each sample. Ten DWTPs showed presence of one or more viruses in source water, with four DWTPs having treated drinking water testing positive. Furthermore, PCR inhibition was assessed for each sample using an exogenous amplification control, which indicated that all of the DWTP samples, including source and treated water samples, had some level of inhibition, confirming that inhibition plays an important role in PCR-based assessments of environmental samples. PCR inhibition measurements, viral recovery, and other assessments were incorporated into a Bayesian model to more accurately determine viral load in both source and treated water. Results of the Bayesian model indicated that viruses are present in source water and treated water. By using a Bayesian framework that incorporates inhibition, as well as many other parameters that affect viral detection, this study offers an approach for more accurately estimating the occurrence of viral pathogens in environmental waters.

The construction of recombinant Lactobacillus casei expressing BVDV E2 protein and its immune response in mice

Bovine viral diarrhea virus (BVDV) is the etiological agent of BVD causes substantial economic losses and endemic in world-wide cattle population. Mucosal immunity plays an important role in protection against BVDV infection and Lactobacillus casei is believed as an excellent live vaccine vector for expressing foreign genes. In this study, we have constructed a novel recombinant L. casei/pELX1-E2 strain expressing the most immunogenic E2 antigen of BVDV; using growth phage dependent surface expression system pELX1. The expression of E2 protein was verified by SDS-PAGE, Western blotting, and Immunofluorescence microscopic analysis. The immune responses triggered by the E2 producing recombinant L. casei were evaluated in BALB/c mice revealed that oral and intranasal (IN) administration of the recombinant strain was able to induce a significantly higher level of specific anti-E2 mucosal IgA and serum IgG as well as the greater level of cellular response by IFN-γ and IL-12 than those of intramuscular (IM) and control groups of mice. However, IN inoculation was found the most potent route of immunization. The ability of the recombinant strain to induce serum neutralizing antibody against BVDV and reduced viral load after viral challenge indicated better protection of BVDV infection. Therefore, this recombinant L. casei expressing E2 could be a safe and promising mucosal vaccine candidate against BVD.

A human fecal contamination score for ranking recreational sites using the HF183/BacR287 quantitative real-time PCR method

Human fecal pollution of recreational waters remains a public health concern worldwide. As a result, there is a growing interest in the application of human-associated fecal source identification quantitative real-time PCR (qPCR) technologies for water quality research and management. However, there are currently no standardized approaches for field implementation and interpretation of qPCR data. In this study, a standardized HF183/BacR287 qPCR method was combined with a water sampling strategy and a novel Bayesian weighted average approach to establish a human fecal contamination score (HFS) that can be used to prioritize sampling sites for remediation based on measured human waste levels. The HFS was then used to investigate 975 study design scenarios utilizing different combinations of sites with varying sampling intensities (daily to once per week) and number of qPCR replicates per sample (2-14 replicates). Findings demonstrate that site prioritization with HFS is feasible and that both sampling intensity and number of qPCR replicates influence reliability of HFS estimates. The novel data analysis strategy presented here provides a prescribed approach for the implementation and interpretation of human-associated HF183/BacR287 qPCR data with the goal of site prioritization based on human fecal pollution levels. In addition, information is provided for future users to customize study designs for optimal HFS performance.

Differential decomposition of bacterial and viral fecal indicators in common human pollution types

Understanding the decomposition of microorganisms associated with different human fecal pollution types is necessary for proper implementation of many water quality management practices, as well as predicting associated public health risks. Here, the decomposition of select cultivated and molecular indicators of fecal pollution originating from fresh human feces, septage, and primary effluent sewage in a subtropical marine environment was assessed over a six day period with an emphasis on the influence of ambient sunlight and indigenous microbiota. Ambient water mixed with each fecal pollution type was placed in dialysis bags and incubated in situ in a submersible aquatic mesocosm. Genetic and cultivated fecal indicators including fecal indicator bacteria (enterococci, E. coli, and Bacteroidales), coliphage (somatic and F+), Bacteroides fragilis phage (GB-124), and human-associated genetic indicators (HF183/BacR287 and HumM2) were measured in each sample. Simple linear regression assessing treatment trends in each pollution type over time showed significant decay (p ≤ 0.05) in most treatments for feces and sewage (27/28 and 32/40, respectively), compared to septage (6/26). A two-way analysis of variance of log10 reduction values for sewage and feces experiments indicated that treatments differentially impact survival of cultivated bacteria, cultivated phage, and genetic indicators. Findings suggest that sunlight is critical for phage decay, and indigenous microbiota play a lesser role. For bacterial cultivated and genetic indicators, the influence of indigenous microbiota varied by pollution type. This study offers new insights on the decomposition of common human fecal pollution types in a subtropical marine environment with important implications for water quality management applications.

Human Progenitor Cell Quantification after Xenotransplantation in Rat and Mouse Models by a Sensitive qPCR Assay

Xenotransplantation of human cells in animal models is an essential tool for evaluation of safety and efficacy of cell-based products for therapeutic use. Sensitive and reproducible methods are needed to detect and quantify human cells engrafted into the host tissue either in the targeted organ or in undesired locations. We developed a robust quantitative polymerase chain reaction (qPCR) assay based on amplification of human AluYb8 repeats, to assess the number of human cells present in rat or mouse tissues after transplantation. Standard curves of mixed human/rodent DNA and mixed human/rodent cells have been performed to determine the limit of detection and linear range of the assay. Standard curves from DNA mixing differed significantly from standard curves from cell mixing. We show here that the AluYb8 qPCR assay is highly reproducible and is able to quantify human cells in a rodent cell matrix over a large linear range that extends from 50% to 0.01% human cells. Short-term in vivo studies showed that human cells could be quantified in mouse liver up to 7 days after intrasplenic transplantation and in rat liver 4 h after intrahepatic transplantation.

Bayesian Estimation of the Active Concentration and Affinity Constants Using Surface Plasmon Resonance Technology

Surface plasmon resonance (SPR) has previously been employed to measure the active concentration of analyte in addition to the kinetic rate constants in molecular binding reactions. Those approaches, however, have a few restrictions. In this work, a Bayesian approach is developed to determine both active concentration and affinity constants using SPR technology. With the appropriate prior probabilities on the parameters and a derived likelihood function, a Markov Chain Monte Carlo (MCMC) algorithm is applied to compute the posterior probability densities of both the active concentration and kinetic rate constants based on the collected SPR data. Compared with previous approaches, ours exploits information from the duration of the process in its entirety, including both association and dissociation phases, under partial mass transport conditions; do not depend on calibration data; multiple injections of analyte at varying flow rates are not necessary. Finally the method is validated by analyzing both simulated and experimental datasets. A software package implementing our approach is developed with a user-friendly interface and made freely available.

DNA copy number concentration measured by digital and droplet digital quantitative PCR using certified reference materials

The value assignment for properties of six certified reference materials (ERM-AD623a–f), each containing a plasmid DNA solution ranging from 1 million to 10 copies per μL, by using digital PCR (dPCR) with the BioMark™ HD System (Fluidigm) has been verified by applying droplet digital PCR (ddPCR) using the QX100 system (Bio-Rad). One of the critical factors in the measurement of copy number concentrations by digital PCR is the partition volume. Therefore, we determined the average droplet volume by optical microscopy, revealing an average droplet volume that is 8 % smaller than the droplet volume used as the defined parameter in the QuantaSoft software version 1.3.2.0 (Bio-Rad) to calculate the copy number concentration. This observation explains why copy number concentrations estimated with ddPCR and using an average droplet volume predefined in the QuantaSoft software were systematically lower than those measured by dPCR, creating a significant bias between the values obtained by these two techniques. The difference was not significant anymore when the measured droplet volume of 0.834 nL was used to estimate copy number concentrations. A new version of QuantaSoft software (version 1.6.6.0320), which has since been released with Bio-Rad’s new QX200 systems and QX100 upgrades, uses a droplet volume of 0.85 nL as a defined parameter to calculate copy number concentration.

Graphical Abstract

Improving statistical inference on pathogen densities estimated by quantitative molecular methods: malaria gametocytaemia as a case study

Background

Quantitative molecular methods (QMMs) such as quantitative real-time polymerase chain reaction (q-PCR), reverse-transcriptase PCR (qRT-PCR) and quantitative nucleic acid sequence-based amplification (QT-NASBA) are increasingly used to estimate pathogen density in a variety of clinical and epidemiological contexts. These methods are often classified as semi-quantitative, yet estimates of reliability or sensitivity are seldom reported. Here, a statistical framework is developed for assessing the reliability (uncertainty) of pathogen densities estimated using QMMs and the associated diagnostic sensitivity. The method is illustrated with quantification of Plasmodium falciparum gametocytaemia by QT-NASBA.

Results

The reliability of pathogen (e.g. gametocyte) densities, and the accompanying diagnostic sensitivity, estimated by two contrasting statistical calibration techniques, are compared; a traditional method and a mixed model Bayesian approach. The latter accounts for statistical dependence of QMM assays run under identical laboratory protocols and permits structural modelling of experimental measurements, allowing precision to vary with pathogen density. Traditional calibration cannot account for inter-assay variability arising from imperfect QMMs and generates estimates of pathogen density that have poor reliability, are variable among assays and inaccurately reflect diagnostic sensitivity. The Bayesian mixed model approach assimilates information from replica QMM assays, improving reliability and inter-assay homogeneity, providing an accurate appraisal of quantitative and diagnostic performance.

Conclusions

Bayesian mixed model statistical calibration supersedes traditional techniques in the context of QMM-derived estimates of pathogen density, offering the potential to improve substantially the depth and quality of clinical and epidemiological inference for a wide variety of pathogens.

Electronic supplementary material

The online version of this article (doi:10.1186/s12859-014-0402-2) contains supplementary material, which is available to authorized users.

Factors affecting the presence of human-associated and fecal indicator real-time quantitative PCR genetic markers in urban-impacted recreational beaches

Urban runoff can carry a variety of pollutants into recreational beaches, often including bacterial pathogens and indicators of fecal contamination. To develop complete recreational criteria and risk assessments, it is necessary to understand conditions under which human contamination could be present at beaches solely impacted by urban runoff. Accurately estimating risk requires understanding sources, concentrations, and transport mechanisms of microbial contaminants in these environments. By applying microbial source tracking methods and empirical modeling, we assessed the presence and level of human contamination at urban runoff impacted recreational beaches. We also identified environmental parameters and pollution sources that can influence the concentration and transport of culturable and molecular fecal indicator bacteria (FIB) in systems impacted solely by urban runoff. Water samples and physico-chemical parameters were collected from shoreline locations from three South Carolina (SC) beaches (five locations per beach) and two Florida (FL) beaches (three locations per beach). Each SC beach was directly impacted by swashes or tidal creeks receiving stormwater runoff from the urbanized area and therefore were designated as swash drain associated (SDA) beaches, while FL beaches were designated as non-swash drain associated (NSDA). Sampling in swash drains (SD; three sites per SD) directly impacting each SC beach was also conducted. Results indicate that although culturable (enterococci) and real-time quantitative polymerase chain reaction (qPCR) (EC23S857, Entero1, and GenBac3) FIB concentrations were, on average, higher at SD locations, SDA beaches did not have consistently higher molecular FIB signals compared to NSDA beaches. Both human-associated markers (HF183 and HumM2) were concomitantly found only at SDA beaches. Bacteroidales species-specific qPCR markers (BsteriF1 and BuniF2) identified differences in the Bacteroidales community, depending on beach type. The marker for general Bacteroidales was most abundant at SD locations and exhibited a high correlation with both culturable and other molecular markers. Combining molecular information with predictive modeling allowed us to identify both alongshore movement of currents and SD outflow as significant influences on the concentration of molecular and culturable indicators in the bathing zone. Data also suggests that combining methodologies is a useful and cost effective approach to help understand transport dynamics of fecal contamination and identify potential sources of contamination at marine beaches.

Human fecal source identification with real-time quantitative PCR

Waterborne diseases represent a significant public health risk worldwide and can originate from contact with water contaminated with human fecal material. We describe a real-time quantitative PCR (qPCR) method that targets a genetic marker of the human-associated Bacteroides dorei for identification of human fecal pollution in ambient water samples. The following protocol includes water sample collection, filtration, DNA isolation with a sample processing control, qPCR amplification with an internal amplification control, and quality control data analysis.

Development of rapid canine fecal source identification PCR-based assays

The extent to which dogs contribute to aquatic fecal contamination is unknown despite the potential for zoonotic transfer of harmful human pathogens. We used genome fragment enrichment (GFE) to identify novel nonribosomal microbial genetic markers potentially useful for detecting dog fecal contamination with PCR-based methods in environmental samples. Of the 679 sequences obtained from GFE, we used 84 for the development of PCR assays targeting putative canine-associated genetic markers. Twelve genetic markers were shown to be prevalent among dog fecal samples and were rarely found in other animals. Three assays, DG3, DG37, and DG72, performed best in terms of specificity and sensitivity and were used for the development of SYBR Green and TaqMan quantitative PCR (qPCR) assays. qPCR analysis of 244 fecal samples collected from a wide geographic range indicated that marker concentrations were below limits of detection in noncanine hosts. As a proof-of-concept, these markers were detected in urban stormwater samples, suggesting a future application of newly developed methods for water quality monitoring.

Multiplex event-specific qualitative polymerase chain reaction for detecting three transgenic rice lines and application of a standard plasmid as a quantitative reference molecule

The three most well-known genetically modified (GM) rice lines in China are TT51-1, KMD1, and KF6. The purposes of this study were to establish a multiplex event-specific qualitative polymerase chain reaction (meqPCR) system for simultaneous detection of the three transgenic rice events and to construct a plasmid as the reference molecule for quantitative analysis. Event-specific primers for each event were selected or designed by focusing on the transgene borders between the inserted DNA and the flanking rice DNA. The developed meqPCR was anticipated to detect distinct amplicons as 454, 398, 301, and 250bp from KF6, KMD1, TT51-1, and the rice endogenous reference gene, respectively. The robustness of the meqPCR was tested with different levels of the three transgenic rice genomic DNAs, and the sensitivity threshold of the meqPCR was at least 50ng of 0.1% rice DNA for each event when the three transgenic rice events present and with other GM materials together. The constructed plasmid was evaluated using mixed samples with known GM contents in real-time quantitative PCR. The results indicated that the constructed plasmid was acceptable and suitable for GM rice quantitative analysis.

Biotic interactions and sunlight affect persistence of fecal indicator bacteria and microbial source tracking genetic markers in the upper Mississippi river

The sanitary quality of recreational waters that may be impacted by sewage is assessed by enumerating fecal indicator bacteria (FIB) (Escherichia coli and enterococci); these organisms are found in the gastrointestinal tracts of humans and many other animals, and hence their presence provides no information about the pollution source. Microbial source tracking (MST) methods can discriminate between different pollution sources, providing critical information to water quality managers, but relatively little is known about factors influencing the decay of FIB and MST genetic markers following release into aquatic environments. An in situ mesocosm was deployed at a temperate recreational beach in the Mississippi River to evaluate the effects of ambient sunlight and biotic interactions (predation, competition, and viral lysis) on the decay of culture-based FIB, as well as molecularly based FIB (Entero1a and GenBac3) and human-associated MST genetic markers (HF183 and HumM2) measured by quantitative real-time PCR (qPCR). In general, culturable FIB decayed the fastest, while molecularly based FIB and human-associated genetic markers decayed more slowly. There was a strong correlation between the decay of molecularly based FIB and that of human-associated genetic markers (r(2), 0.96 to 0.98; P < 0.0001) but not between culturable FIB and any qPCR measurement. Overall, exposure to ambient sunlight may be an important factor in the early-stage decay dynamics but generally was not after continued exposure (i.e., after 120 h), when biotic interactions tended to be the only/major influential determinant of persistence.

An extended ΔCT-method facilitating normalisation with multiple reference genes suited for quantitative RT-PCR analyses of human hepatocyte-like cells

Reference genes (RG) as sample internal controls for gene transcript level analyses by quantitative RT-PCR (RT-qPCR) must be stably expressed within the experimental range. A variety of in vitro cell culture settings with primary human hepatocytes, and Huh-7 and HepG2 cell lines, were used to determine candidate RG expression stability in RT-qPCR analyses. Employing GeNorm, BestKeeper and Normfinder algorithms, this study identifies PSMB6, MDH1 and some more RG as sufficiently unregulated, thus expressed at stable levels, in hepatocyte-like cells in vitro. Inclusion of multiple RG, quenching occasional regulations of single RG, greatly stabilises gene expression level calculations from RT-qPCR data. To further enhance validity and reproducibility of relative RT-qPCR quantifications, the ΔCT calculation can be extended (e-ΔCT) by replacing the CT of a single RG in ΔCT with an averaged CT-value from multiple RG. The use of two or three RG - here identified suited for human hepatocyte-like cells - for normalisation with the straightforward e-ΔCT calculation, should improve reproducibility and robustness of comparative RT-qPCR-based gene expression analyses.

Improved HF183 quantitative real-time PCR assay for characterization of human fecal pollution in ambient surface water samples

Quantitative real-time PCR (qPCR) assays that target the human-associated HF183 bacterial cluster within members of the genus Bacteroides are among the most widely used methods for the characterization of human fecal pollution in ambient surface waters. In this study, we show that a current TaqMan HF183 qPCR assay (HF183/BFDrev) routinely forms nonspecific amplification products and introduce a modified TaqMan assay (HF183/BacR287) that alleviates this problem. The performance of each qPCR assay was compared in head-to-head experiments investigating limits of detection, analytical precision, predicted hybridization to 16S rRNA gene sequences from a reference database, and relative marker concentrations in fecal and sewage samples. The performance of the modified HF183/BacR287 assay is equal to or improves upon that of the original HF183/BFDrev assay. In addition, a qPCR chemistry designed to combat amplification inhibition and a multiplexed internal amplification control are included. In light of the expanding use of PCR-based methods that rely on the detection of extremely low concentrations of DNA template, such as qPCR and digital PCR, the new TaqMan HF183/BacR287 assay should provide more accurate estimations of human-derived fecal contaminants in ambient surface waters.

Integrating quantitative PCR and Bayesian statistics in quantifying human adenoviruses in small volumes of source water

Rapid quantification of viral pathogens in drinking and recreational water can help reduce waterborne disease risks. For this purpose, samples in small volume (e.g. 1L) are favored because of the convenience of collection, transportation and processing. However, the results of viral analysis are often subject to uncertainty. To overcome this limitation, we propose an approach that integrates Bayesian statistics, efficient concentration methods, and quantitative PCR (qPCR) to quantify viral pathogens in water. Using this approach, we quantified human adenoviruses (HAdVs) in eighteen samples of source water collected from six drinking water treatment plants. HAdVs were found in seven samples. In the other eleven samples, HAdVs were not detected by qPCR, but might have existed based on Bayesian inference. Our integrated approach that quantifies uncertainty provides a better understanding than conventional assessments of potential risks to public health, particularly in cases when pathogens may present a threat but cannot be detected by traditional methods.

Age-related shifts in the density and distribution of genetic marker water quality indicators in cow and calf feces

Calves make up about 16% of the current bovine population in the United States and can excrete high levels of human pathogens in their feces. We describe the density and distribution of genetic markers from 9 PCR- and real-time quantitative PCR-based assays, including CF128, CF193, CowM2, CowM3, GenBac3, Entero1, EC23S857, CampF2, and ttr-6, commonly used to help assess ambient surface water quality. Each assay was tested against a collection of 381 individual bovine fecal samples representing 31 mother and calf pairings collected over a 10-month time period from time of birth through weaning. Genetic markers reported to be associated with ruminant and/or bovine fecal pollution were virtually undetected in calves for up to 115 days from birth, suggesting that physiological changes in calf ruminant function impact host-associated genetic marker shedding. In addition, general fecal indicator markers for Bacteroidales, Escherichia coli, and Enterococcus spp. exhibited three separate trends across time, indicating that these bacteria respond differently to age-related physiological and dietary changes during calf development. The results of this study suggest that currently available PCR-based water quality indicator technologies can under- or overestimate fecal pollution originating from calves and identify a need for novel calf-associated source identification methods.

Characterization of fecal concentrations in human and other animal sources by physical, culture-based, and quantitative real-time PCR methods

The characteristics of fecal sources, and the ways in which they are measured, can profoundly influence the interpretation of which sources are contaminating a body of water. Although feces from various hosts are known to differ in mass and composition, it is not well understood how those differences compare across fecal sources and how differences depend on characterization methods. This study investigated how nine different fecal characterization methods provide different measures of fecal concentration in water, and how results varied across twelve different fecal pollution sources. Sources investigated included chicken, cow, deer, dog, goose, gull, horse, human, pig, pigeon, septage and sewage. A composite fecal slurry was prepared for each source by mixing feces from 6 to 22 individual samples with artificial freshwater. Fecal concentrations were estimated by physical (wet fecal mass added and total DNA mass extracted), culture-based (Escherichia coli and enterococci by membrane filtration and defined substrate), and quantitative real-time PCR (Bacteroidales, E. coli, and enterococci) characterization methods. The characteristics of each composite fecal slurry and the relationships between physical, culture-based and qPCR-based characteristics varied within and among different fecal sources. An in silico exercise was performed to assess how different characterization methods can impact identification of the dominant fecal pollution source in a mixed source sample. A comparison of simulated 10:90 mixtures based on enterococci by defined substrate predicted a source reversal in 27% of all possible combinations, while mixtures based on E. coli membrane filtration resulted in a reversal 29% of the time. This potential for disagreement in minor or dominant source identification based on different methods of measurement represents an important challenge for water quality managers and researchers.

Species-specific diagnostic assays for Bonamia ostreae and B. exitiosa in European flat oyster Ostrea edulis: conventional, real-time and multiplex PCR

Bonamia ostreae and B. exitiosa have caused mass mortalities of various oyster species around the world and co-occur in some European areas. The World Organisation for Animal Health (OIE) has included infections with both species in the list of notifiable diseases. However, official methods for species-specific diagnosis of either parasite have certain limitations. In this study, new species-specific conventional PCR (cPCR) and real-time PCR techniques were developed to diagnose each parasite species. Moreover, a multiplex PCR method was designed to detect both parasites in a single assay. The analytical sensitivity and specificity of each new method were evaluated. These new procedures were compared with 2 OIE-recommended methods, viz. standard histology and PCR-RFLP. The new procedures showed higher sensitivity than the OIE recommended ones for the diagnosis of both species. The sensitivity of tests with the new primers was higher using oyster gills and gonad tissue, rather than gills alone. The lack of a 'gold standard' prevented accurate estimation of sensitivity and specificity of the new methods. The implementation of statistical tools (maximum likelihood method) for the comparison of the diagnostic tests showed the possibility of false positives with the new procedures, although the absence of a gold standard precluded certainty. Nevertheless, all procedures showed negative results when used for the analysis of oysters from a Bonamia-free area.

Effect of platform, reference material, and quantification model on enumeration of Enterococcus by quantitative PCR methods

Quantitative polymerase chain reaction (qPCR) is increasingly being used for the quantitative detection of fecal indicator bacteria in beach water. QPCR allows for same-day health warnings, and its application is being considered as an option for recreational water quality testing in the United States (USEPA, 2011. EPA-OW-2011-0466, FRL-9609-3, Notice of Availability of Draft Recreational Water Quality Criteria and Request for Scientific Views). However, transition of qPCR from a research tool to routine water quality testing requires information on how various method variations affect target enumeration. Here we compared qPCR performance and enumeration of enterococci in spiked and environmental water samples using three qPCR platforms (Applied Biosystem StepOnePlus™, the BioRad iQ™5 and the Cepheid SmartCycler(®) II), two reference materials (lyophilized cells and frozen cells on filters) and two comparative CT quantification models (ΔCT and ΔΔCT). Reference materials exerted the biggest influence, consistently affecting results by approximately 0.5 log(10) unit. Platform had the smallest effect, generally exerting <0.1 log(10) unit difference in final results. Quantification model led to small differences (0.04-0.2 log(10) unit) in this study with relatively uninhibited samples, but has the potential to cause as much as 8-fold (0.9 log(10) unit) difference in potentially inhibitory samples. Our findings indicate the need for a certified and centralized source of reference materials and additional studies to assess applicability of the quantification models in analyses of PCR inhibitory samples.

Application of quantitative PCR for the detection of microorganisms in water

The occurrence of microorganisms in water due to contamination is a health risk and control thereof is a necessity. Conventional detection methods may be misleading and do not provide rapid results allowing for immediate action. The quantitative polymerase chain reaction (qPCR) method has proven to be an effective tool to detect and quantify microorganisms in water within a few hours. Quantitative PCR assays have recently been developed for the detection of specific adeno- and polyomaviruses, bacteria and protozoa in different water sources. The technique is highly sensitive and able to detect low numbers of microorganisms. Quantitative PCR can be applied for microbial source tracking in water sources, to determine the efficiency of water and wastewater treatment plants and act as a tool for risk assessment. Different qPCR assays exist depending on whether an internal control is used or whether measurements are taken at the end of the PCR reaction (end-point qPCR) or in the exponential phase (real-time qPCR). Fluorescent probes are used in the PCR reaction to hybridise within the target sequence to generate a signal and, together with specialised systems, quantify the amount of PCR product. Quantitative reverse transcription polymerase chain reaction (q-RT-PCR) is a more sensitive technique that detects low copy number RNA and can be applied to detect, e.g. enteric viruses and viable microorganisms in water, and measure specific gene expression. There is, however, a need to standardise qPCR protocols if this technique is to be used as an analytical diagnostic tool for routine monitoring. This review focuses on the application of qPCR in the detection of microorganisms in water.

Influences of sample interference and interference controls on quantification of enterococci fecal indicator bacteria in surface water samples by the qPCR method

A quantitative polymerase chain reaction (qPCR) method for the detection of enterococci fecal indicator bacteria has been shown to be generally applicable for the analysis of temperate fresh (Great Lakes) and marine coastal waters and for providing risk-based determinations of water quality at recreational beaches. In this study we further examined the applicability of the method for analyses of diverse inland waters as well as tropical marine waters from Puerto Rico based on the frequencies of samples showing presumptive PCR interference. Interference was assessed by salmon DNA sample processing control (SPC) and internal amplification control (IAC) assay analysis results and pre-established acceptance criteria of <3.0 and <1.5 cycle threshold (Ct) offsets from control samples, respectively. SPC assay results were accepted in analyses of 93% of the inland water samples whereas the criterion was met at frequencies of 60% and 97% in analyses of samples from Puerto Rico in two different years of sampling. The functionality of the control assays and their acceptance criteria was assessed on the basis of relative recovery estimates of spiked enterococci target organisms extracted in the presence of water sample filters and sample-free control filters and was supported by observations that recovery estimates from the water sample and control filters were substantially different for samples that failed these criteria. Through the combined use of the SPC and IAC assays, two presumptive types of interference were identified. One type, observed in the tropical marine water samples, appeared to primarily affect the availability of the DNA templates for detection. The second type, observed in river water samples, appeared to primarily affect PCR amplification efficiency. In the presence of DNA template interference, adjustments from SPC assay results by the ΔΔCt comparative Ct calculation method decreased the variability of spiked enterococci recovery estimates and increased the similarity with control filters as compared to unadjusted recovery estimates obtained by the ΔCt calculation method. Use of a higher salmon DNA concentration in the extraction buffer also reduced this type of interference. The effects of amplification interference were largely reversed by dilution of the DNA extracts and even more effectively by the use of an alternative, commercial PCR reagent, designed for the analysis of environmental samples.