Highly purified mussel adhesive protein to secure biosafety for in vivo applications

Acrylated adhesive proteinic microneedle patch for local drug delivery and stable device implantation

Microneedle patches have been developed as favorable platforms for delivery systems, such as the locoregional application of therapeutic drugs, and implantation systems, such as electronic devices on visceral tissue surfaces. However, the challenge lies in finding materials that can achieve both biocompatibility and stable fixation on the target tissue. To address this issue, utilizing a biocompatible adhesive biomaterial allows the flat part of the patch to adhere as well, enabling double-sided adhesion for greater versatility. In this work, we propose an adhesive microneedle patch based on mussel adhesive protein (MAP) with enhanced mechanical strength via ultraviolet-induced polyacrylate crosslinking and Coomassie brilliant blue molecules. The strong wet tissue adhesive and biocompatible nature of engineered acrylated-MAP resulted in the development of a versatile wet adhesive microneedle patch system for in vivo usage. In a mouse tumor model, this microneedle patch effectively delivered anticancer drugs while simultaneously sealing the skin wound. Additionally, in an application of rat subcutaneous implantation, an electronic circuit was stably anchored using a double-sided wet adhesive microneedle patch, and its signal location underneath the skin did not change over time. Thus, the proposed acrylated-MAP-based wet adhesive microneedle patch system holds great promise for biomedical applications, paving the way for advancements in drug delivery therapeutics, tissue engineering, and implantable electronic medical devices.

Protective Topical Dual-Sided Nanofibrous Hemostatic Dressing Using Mussel and Silk Proteins with Multifunctionality of Hemostasis and Anti-Bacterial Infiltration

Topical hemostatic agents are preferred for application to sensitive bleeding sites because of their immediate locoregional effects with less tissue damage. However, the majority of commercial hemostatic agents fail to provide stable tissue adhesion to bleeding wounds or act as physical barriers against contaminants. Hence, it has become necessary to investigate biologically favorable materials that can be applied and left within the body post-surgery. In this study, a dual-sided nanofibrous dressing for topical hemostasis is electrospun using a combination of two protein materials: bioengineered mussel adhesive protein (MAP) and silk fibroin (SF). The wound-adhesive inner layer is fabricated using dihydroxyphenylalanine (DOPA)-containing MAP, which promotes blood clotting by aggregation of hemocytes and activation of platelets. The anti-adhesive outer layer is composed of alcohol-treated hydrophobic SF, which has excellent spinnability and mechanical strength for fabrication. Because both proteins are fully biodegradable in vivo and biocompatible, the dressing would be suitable to be left in the body. Through in vivo evaluation using a rat liver damage model, significantly reduced clotting time and blood loss are confirmed, successfully demonstrating that the proposed dual-sided nanofibrous dressing has the right properties and characteristics as a topical hemostatic agent having dual functionality of hemostasis and physical protection.

Anti-Microbial Activities of Mussel-Derived Recombinant Proteins against Gram-Negative Bacteria

Many anti-microbial peptides (AMPs) and pro-apoptotic peptides are considered as novel anti-microbial agents, distinguished by their different characteristics. Nevertheless, AMPs exhibit certain limitations, including poor stability and potential toxicity, which hinder their suitability for applications in pharmaceutics and medical devices. In this study, we used recombinant mussel adhesive protein (MAP) as a robust scaffold to overcome these limitations associated with AMPs. Mussel adhesive protein fused with functional peptides (MAP-FPs) was used to evaluate anti-microbial activities, minimal inhibitory concentration (MIC), and time-kill kinetics (TKK) assays against six of bacteria strains. MAP and MAP-FPs were proved to have an anti-microbial effect with MIC of 4 or 8 µM against only Gram-negative bacteria strains. All tested MAP-FPs killed four different Gram-negative bacteria strains within 180 min. Especially, MAP-FP-2 and -5 killed three Gram-negative bacteria strain, including E. coli, S. typhimurium, and K. pneumoniae, within 10 min. A cytotoxicity study using Vero and HEK293T cells indicated the safety of MAP and MAP-FP-2 and -3. Thermal stability of MAP-FP-2 was also validated by HPLC analysis at an accelerated condition for 4 weeks. This study identified that MAP-FPs have novel anti-microbial activity, inhibiting the growth and rapidly killing Gram-negative bacteria strains with high thermal stability and safety.

Self-Healable Adhesive Hydrogel with a Preserved Underwater Adhesive Ability Based on Histidine-Zinc Coordination and a Bioengineered Hybrid Mussel Protein

Mussels are marine organisms that are capable of constructing an underwater adhesion between their bodies and rigid structures. It is well known that mussels achieve underwater adhesion through the presence of mussel adhesive proteins (MAPs) that contain high levels of 3,4-dihydroxyphenylalanine (DOPA). Although the extraordinary underwater adhesive properties of mussels are attributed to DOPA, its capacity to play a dual role in surface adhesion and internal cohesion is inherently limited. However, mussels employ a combination of chemical moieties, not just DOPA, along with anatomical components, such as plaque and byssus, in underwater adhesion. This also involves junction proteins that connect the plaque and byssus. In this study, a novel hybrid MAP was bioengineered via the fusion of the plaque protein (foot protein type 1) and the histidine-rich domain of the junction protein (foot protein type 4). To achieve direct adhesion underwater, the adhesive should maintain surface adhesion without disintegrating. Notably, the histidine-Zn-coordinated hybrid MAP hydrogel maintained a high surface adhesion ability even after cross-linking because of the preservation of its unoxidized and non-cross-linked DOPA moieties. The formulated adhesive hydrogel system based on the bioengineered hybrid MAP exhibited self-healing properties, owing to the reversible metal coordination bonds. The developed adhesive hydrogel exhibits outstanding levels of bulk adhesion in underwater environments, highlighting its potential as an effective adhesive biomaterial. Therefore, the introduction of histidine-rich domains into MAPs may be applied in various studies to formulate mussel-inspired adhesives with self-healing properties and to fully utilize the adhesive ability of DOPA.

Molecular cloning, expression, mRNA secondary structure and immunological characterization of mussel foot proteins (Mfps) (Mollusca: Bivalvia)

The macroscale production of mussel foot proteins (Mfps) in the expression system has not succeeded to date. The principal reasons for this are low levels of expression and yield of Mfps, lack of post-translational modifications (PTMs), and immunological toxic effects on the host system. Identification of post-translational modification sites, suitable expression hosts, and immunological responses through an experimental approach is very costly and time-consuming. However, in the present study, in silico post-translation modification, antigenicity, allergenicity, and the immunological reaction of all available Mfps were characterized. Furthermore, all Mfps were codon optimized in three different expression systems to determine the best expression host. Finally, we performed the in-silico cloning of all codon-optimized Mfps in a suitable host (E. coli K12, pET28a(+) vector) and analyzed the secondary structure of mRNA and its structural stability. Among the 78 Mfps, six fps are considered potential allergenic proteins, six fps are considered non-allergenic proteins, and all other fps are probably allergenic. High antigenicity was observed in bacterial cells as compared to yeast and tumor cells. Nevertheless, the predicted expression of Mfps in a bacterial host is higher than in other expression hosts. Important to note that all Mfps showed significant immunological activity in the human system, and we concluded that these antigenic, allergenic, and immunological properties are directly correlated with their amino acid composition. The study's major goal is to provide a comprehensive understanding of Mfps and aid in the future genetic engineering and expression of Mfps and its diverse applications in different fields.Communicated by Ramaswamy H. Sarma.

Biomaterials and Bioactive Natural Products from Marine Invertebrates: From Basic Research to Innovative Applications

Aquatic invertebrates are a major source of biomaterials and bioactive natural products that can find applications as pharmaceutics, nutraceutics, cosmetics, antibiotics, antifouling products and biomaterials. Symbiotic microorganisms are often the real producers of many secondary metabolites initially isolated from marine invertebrates; however, a certain number of them are actually synthesized by the macro-organisms. In this review, we analysed the literature of the years 2010–2019 on natural products (bioactive molecules and biomaterials) from the main phyla of marine invertebrates explored so far, including sponges, cnidarians, molluscs, echinoderms and ascidians, and present relevant examples of natural products of interest to public and private stakeholders. We also describe omics tools that have been more relevant in identifying and understanding mechanisms and processes underlying the biosynthesis of secondary metabolites in marine invertebrates. Since there is increasing attention on finding new solutions for a sustainable large-scale supply of bioactive compounds, we propose that a possible improvement in the biodiscovery pipeline might also come from the study and utilization of aquatic invertebrate stem cells.

Mussel Adhesive-Inspired Proteomimetic Polymer

Herein, a synthetic polymer proteomimetic is described that reconstitutes the key structural elements and function of mussel adhesive protein. The proteomimetic was prepared via graft-through ring-opening metathesis polymerization of a norbornenyl-peptide monomer. The peptide was derived from the natural underwater glue produced by marine mussels that is composed of a highly repetitive 10 amino acid tandem repeat sequence. The hypothesis was that recapitulation of the repeating unit in this manner would provide a facile route to a nature-inspired adhesive. To this end, the material, in which the arrangement of peptide units was as side chains on a brush polymer rather than in a linear fashion as in the natural protein, was examined and compared to the native protein. Mechanical measurements of adhesion forces between solid surfaces revealed improved adhesion properties over the natural protein, making this strategy attractive for diverse applications. One such application is demonstrated, using the polymers as a surface adhesive for the immobilization of live cells.

Tunicate-Inspired Photoactivatable Proteinic Nanobombs for Tumor-Adhesive Multimodal Therapy

Near-IR (NIR) light-responsive multimodal nanotherapeutics have been proposed to achieve improved therapeutic efficacy and high specificity in cancer therapy. However, their clinical application is still elusive due to poor biometabolization and short retention at the target site. Here, innovative photoactivatable vanadium-doped adhesive proteinic nanoparticles (NPs) capable of allowing biological photoabsorption and NIR-responsive anticancer therapeutic effects to realize trimodal photothermal-gas-chemo-therapy treatments in a highly biocompatible, site-specific manner are proposed. The photoactivatable tumor-adhesive proteinic NPs can enable efficient photothermal conversion via tunicate-inspired catechol-vanadium complexes as well as prolonged tumor retention by virtue of mussel protein-driven distinctive adhesiveness. The incorporation of a thermo-sensitive nitric oxide donor and doxorubicin into the photoactivatable adhesive proteinic NPs leads to synergistic anticancer therapeutic effects as a result of photothermal-triggered "bomb-like" multimodal actions. Thus, this protein-based phototherapeutic tumor-adhesive NPs have great potential as a spatiotemporally controllable therapeutic system to accomplish effective therapeutic implications for the complete ablation of cancer.

Sutureless Transplantation of Amniotic Membrane Using a Visible Light-Curable Protein Bioadhesive for Ocular Surface Reconstruction

The conjunctiva is a thin mucous membrane of the eye. Pterygium, a commonly appearing disease on the ocular surface, requires surgery to excise the conjunctiva to prevent visual deterioration. Recently, transplantation of the amniotic membrane (AM), which is the innermost membrane of the placenta, has been highlighted as an efficient method to cure conjunctiva defects because of its advantages of no side effects compared to mitomycin C treatment and not leaving additional scars on donor site compared to conjunctival autografting. However, to minimize additional damage to the ocular surface by suturing, AM transplantation (AMT) needs to be simplified by using a less invasive, time-saving method. In this work, a visible light-curable protein bioadhesive (named FixLight) for efficient sutureless AMT is applied. FixLight, which is based on bioengineered mussel adhesive protein (MAP), is easily applied between damaged ocular surfaces and transplanted AM, and rapidly cured by harmless blue light activation. Through in vivo evaluation using a rabbit model, the authors demonstrated that FixLight enabled facile, fast, and strong attachment of AM on sclera and promoted ocular surface reconstruction with good biocompatibility. Thus, FixLight can be successfully used as a promising clinical bioadhesive in opthalmological surgeries that require sutureless and rapid operation.

Preclinical evaluation of a regenerative immiscible bioglue for vesico-vaginal fistula

Currently, there are no clinically available tissue adhesives that work effectively in the fluid-rich and highly dynamic environments of the human body, such as the urinary system. This is especially relevant to the management of vesico-vaginal fistula, and developing a high-performance tissue adhesive for this purpose could vastly expand urologists' surgical repertoire and dramatically reduce patient discomfort. Herein, we developed a water-immiscible mussel protein-based bioadhesive (imWIMBA) with significantly improved properties in all clinical respects, allowing it to achieve rapid and strong underwater adhesion with tunable rheological properties. We evaluated in vivo potential of imWIMBA for sealing thermally injured fistula tracts between the bladder and vagina. Importantly, the use of imWIMBA in the presence of prolonged bladder drainage resulted in perfect closure of the vesico-vaginal fistula in operated pigs. Thus, imWIMBA could be successfully used for many surgical applications and improve treatment efficacy when combined with conventional surgical methods. STATEMENT OF SIGNIFICANCE: Vesico-vaginal fistula (VVF) is an abnormal opening between the bladder and the vagina, which is a stigmatized disease in many developing countries. Leakage of urine into internal organs can induce serious complications and delay wound repair. Conventional VVF treatment requires skillful suturing to provide a tension-free and watertight closure. In addition, there is no clinically approved surgical glue that works in wet and highly dynamic environments such as the urinary system. In this work, for potential clinical VVF closure and regeneration, we developed an advanced immiscible mussel protein-based bioglue with fast, strong, wet adhesion and tunable rheological properties. This regenerative immiscible bioglue could be successfully used for sealing fistulas and further diverse surgical applications as an adjuvant for conventional suture methods.

Component-resolved microarray analysis of IgE sensitization profiles to Culicoides recombinant allergens in horses with insect bite hypersensitivity

Background

Allergy to bites of blood‐sucking insects, including biting midges, can affect both human and veterinary patients. Horses are often suffering from an IgE‐mediated allergic dermatitis caused by bites of midges (Culicoides spp). With the aim to improve allergen immunotherapy (AIT), numerous Culicoides allergens have been produced as recombinant (r‐) proteins. This study aimed to test a comprehensive panel of differently expressed Culicoides r‐allergens on a cohort of IBH‐affected and control horses using an allergen microarray.

Methods

IgE levels to 27 Culicoides r‐allergens, including 8 previously unpublished allergens, of which 11 were expressed in more than one expression system, were determined in sera from 347 horses. ROC analyses were carried out, cut‐offs selected using a specificity of 95% and seropositivity rates compared between horses affected with insect bite hypersensitivity (IBH) and control horses. The combination of r‐allergens giving the best performing test was determined using logistic regression analysis.

Results

Seropositivity was significantly higher in IBH horses compared with controls for 25 r‐allergens. Nine Culicoides r‐allergens were major allergens for IBH with seven of them binding IgE in sera from > 70% of the IBH‐affected horses. Combination of these top seven r‐allergens could diagnose > 90% of IBH‐affected horses with a specificity of > 95%. Correlation between differently expressed r‐allergens was usually high (mean = 0.69, range: 0.28‐0.91).

Conclusion

This microarray will be a powerful tool for the development of component‐resolved, patient‐tailored AIT for IBH and could be useful for the study of allergy to biting midges in humans and other species.

Adhesive protein-based angiogenesis-mimicking spatiotemporal sequential release of angiogenic factors for functional regenerative medicine

Damaged vascular structures after critical diseases are difficult to completely restore to their original conditions without specific treatments. Thus, therapeutic angiogenesis has been spotlighted as an attractive strategy. However, effective strategies for mimicking angiogenic processes in the body have not yet been developed. In the present work, we developed a bioengineered mussel adhesive protein (MAP)-based novel therapeutic angiogenesis platform capable of spatiotemporally releasing angiogenic growth factors to target disease sites with high viscosity and strong adhesiveness in a mucus-containing environment with curvature. Polycationic MAP formed complex coacervate liquid microdroplets with polyanionic hyaluronic acid and subsequently gelated into microparticles. Platelet-derived growth factor (PDGF), which is a late-phase angiogenic factor, was efficiently encapsulated during the process of coacervate microparticle formation. These PDGF-loaded microparticles were blended with vascular endothelial growth factor (VEGF), which is the initial-phase angiogenic factor, in MAP-based pregel solution and finally crosslinked in situ into a hydrogel at the desired site. The microparticle-based angiogenic-molecule spatiotemporal sequential (MASS) release platform showed good adhesion and underwater durability, and its elasticity was close to that of target tissue. Using two in vivo critical models, i.e., full-thickness excisional wound and myocardial infarction models, the MASS release platform was evaluated for its in vivo feasibility as an angiogenesis-inducing platform and demonstrated effective angiogenesis as well as functional regenerative efficacy. Based on these superior physicochemical characteristics, the developed MASS release platform could be successfully applied in many biomedical practices as a waterproof bioadhesive with the capability for the spatiotemporal delivery of angiogenic molecules in the treatment of ischemic diseases.

Body temperature-activated protein-based injectable adhesive hydrogel incorporated with decellularized adipose extracellular matrix for tissue-specific regenerative stem cell therapy

Adipose tissue engineering represents a valuable alternative for reconstructive and cosmetic applications to restore soft tissue loss. Herein, for the development of a tissue-engineered adipose substitute, we designed an injectable thermoresponsive tissue adhesive hydrogel by grafting bioengineered mussel adhesive protein (MAP) with poly(N-isopropylacrylamide) (PNIPAM) and incorporating decellularized adipose tissue (DAT) powder as a biochemical cue. The body temperature-activated PNIPAM-grafted MAP (MAP-PNIPAM) hydrogel showed 3.2-times higher water retention ability, high porosity, and 8.4-times stronger tissue adhesive properties compared to the PNIPAM gel alone with pore collapse. Moreover, we found that the introduction of 5 wt% DAT powder had adipo-inductive and adipo-conductive effects, which might be due to the provision of biochemical substrates enriched in collagen and laminin for cell-cell and cell-matrix interactions. In vivo subcutaneous injection of the adipose-derived stem cell-laden DAT-incorporated MAP-PNIPAM hydrogel further demonstrated better volume maintenance, angiogenesis, and lipid accumulation than control injectable alginate gel or DAT powder only. Collectively, our injectable body temperature-activated tissue adhesive MAP-PNIPAM hydrogel system with a decellularized extracellular matrix source can be utilized as a promising alternative for tissue-specific regenerative stem cell therapy. STATEMENT OF SIGNIFICANCE: For adipose tissue engineering, we designed an injectable body temperature-activated adhesive hydrogel by grafting bioengineered mussel adhesive protein (MAP) with poly(N-isopropylacrylamide) (PNIPAM) and incorporating adipose-derived stem cells (ASCs) and decellularized adipose tissue (DAT) powder as regenerative cell and ECM sources. PNIPAM has been widely used for cell sheet engineering, but not for cell carriers due to its dramatic thermal contractive properties. By conjugation with hydrophilic MAP, water retention ability and tissue adhesiveness of the scaffold increased by a factor of 3.2- and 8.4-fold, respectively, which are highly required for survival of the transplanted cells and interfacial integration with host tissues. In vivo performance demonstrated that ASCs/DAT powder-laden MAP-PNIPAM hydrogel achieved better volume maintenance, neovascularization, and adipogenesis than control injectable groups.

Bio-inspired swellable hydrogel-forming double-layered adhesive microneedle protein patch for regenerative internal/external surgical closure

Significant tissue damage, scarring, and an intense inflammatory response remain the greatest concerns for conventional wound closure options, including sutures and staples. In particular, wound closure in internal organs poses major clinical challenges due to air/fluid leakage, local ischemia, and subsequent impairment of healing. Herein, to overcome these limitations, inspired by endoparasites that swell their proboscis to anchor to host's intestines, we developed a hydrogel-forming double-layered adhesive microneedle (MN) patch consisting of a swellable mussel adhesive protein (MAP)-based shell and a non-swellable silk fibroin (SF)-based core. By possessing tissue insertion capability (7-times greater than the force for porcine skin penetration), MAP-derived surface adhesion, and selective swelling-mediated physical entanglement, our hydrogel-forming adhesive MN patch achieved ex vivo superior wound sealing capacity against luminal leaks (139.7 ± 14.1 mmHg), which was comparable to suture (151.0 ± 23.3 mmHg), as well as in vivo excellent performance for wet and/or dynamic external and internal tissues. Collectively, our bioinspired adhesive MN patch can be successfully used in diverse practical applications ranging from vascular and gastrointestinal wound healing to transdermal delivery for pro-regenerative or anti-inflammatory agents to target tissues.

Bioinspired Multifunctional Protein Coating for Antifogging, Self-Cleaning, and Antimicrobial Properties

A multifunctional coating with antifogging, self-cleaning, and antimicrobial properties has been prepared based on a mussel-inspired chimeric protein MP-KE, which is the first example that these proteins were successfully applied to fabricate antifogging surfaces. The coating exhibits super hydrophilic properties, as indicated by contact angles less than 5° and high light transmittance similar to bare glass substrates about 90%. The zwitterionic peptides of MP-KE empower water molecules to expand into thin hydrated films rapidly, providing the protein coating with diverse surface functions. Moreover, the coatings have excellent stability and a convenient preparation process because of the mussel adhesive motif of MP-KE which makes the coating anchor onto the surface strongly. As a protein material, this multifunctional coating possesses remarkable biocompatibility and has a potential application prospects in the biomedical and pharmaceutical fields.

Effect of mussel adhesive protein coating on osteogenesis in vitro and osteointegration in vivo to alkali-treated titanium with nanonetwork structures

Purpose: On the basis of reasonable superposition of various surface treatment methods, alkali-treated titanium with nanonetwork structures (TNS) was coated with mussel adhesive protein (MAP) and named TNS-MAP. The aims were to optimize the biological properties of TNS, endue it with new properties, and enhance its utility in clinical dental applications. Methods: TNS disks were coated with MAP and the product surface was characterized. Its osteogenic properties were determined by evaluating its effects on cell adhesion, cell proliferation, the expression of osteogenesis-related genes, and in vivo experiments. Results: The treated materials showed excellent hydrophilicity, good surface roughness, and advantages of both TNS and MAP. TNS-MAP significantly promoted initial cell attachment especially after 15 mins and 30 mins. At every time point, cell adhesion and proliferation, the detection rate of osteogenesis-related markers in the extracellular matrix, and the expression of osteogenesis-related genes were markedly superior on TNS-MAP than the control. The in vivo experiments revealed that TNS-MAP promoted new bone growth around the implants and the bone-implant interface. Conclusion: We verified through in vitro and in vivo experiments that we successfully created an effective TNS-MAP composite implant with excellent biocompatibility and advantages of both its TNS and MAP parent materials. Therefore, the new biocomposite implant material TNS-MAP may potentially serve in practical dentistry and orthopedics.

Multi-dimensional bioinspired tactics using an engineered mussel protein glue-based nanofiber conduit for accelerated functional nerve regeneration

Limited regenerative capacity of the nervous system makes treating traumatic nerve injuries with conventional polymer-based nerve grafting a challenging task. Consequently, utilizing natural polymers and biomimetic topologies became obvious strategies for nerve conduit designs. As a bioinspired natural polymer from a marine organism, mussel adhesive proteins (MAPs) fused with biofunctional peptides from extracellular matrix (ECM) were engineered for accelerated nerve regeneration by enhancing cell adhesion, proliferation, neural differentiation, and neurite formation. To physically promote contact guidance of neural and Schwann cells and to achieve guided nerve regeneration, MAP was fabricated into an electrospun aligned nanofiber conduit by introducing synthetic polymer poly(lactic-co-glycolic acid) (PLGA) to control solubility and mechanical property. In vitro and in vivo experiments demonstrated that the multi-dimensional tactics of combining adhesiveness from MAP, integrin-mediated interaction from ECM peptides (in particular, IKVAV derived from laminin α1 chain), and contact guidance from aligned nanofibers synergistically accelerated functional nerve regeneration. Thus, MAP-based multi-dimensional approach provides new opportunities for neural regenerative applications including nerve grafting. STATEMENT OF SIGNIFICANCE: Findings in neural regeneration indicate that a bioinspired polymer-based nerve conduit design should harmoniously constitute various factors, such as biocompatibility, neurotrophic molecule, biodegradability, and contact guidance. Here, we engineered three fusion proteins of mussel-derived adhesive protein with ECM-derived biofunctional peptides to simultaneously provide biocompatibility and integrin-based interactions. In addition, a fabrication of robust aligned nanofiber conduits containing the fusion proteins realized suitable biodegradability and contact guidance. Thus, our multi-dimensional strategy on conduit design provided outstanding biocompatibility, biodegradability, integrin-interaction, and contact guidance to achieve an accelerated functional nerve regeneration. We believe that our bioengineered mussel adhesive protein-based multi-dimensional strategy would offer new insights into the design of nerve tissue engineering biomaterials.

Novel Mussel-Inspired Universal Surface Functionalization Strategy: Protein-Based Coating with Residue-Specific Post-Translational Modification in Vivo

Surface functionalization can effectively endow materials with desirable properties, promoting the performance between the material and environment, with extensive applications. However, a universal and straightforward surface functionalization method with biocompatibility is scarce. In this study, with synthetic biology strategy, recombinant mussel plaque protein with a zwitterionic peptide inspired by molecular chaperone was engineered through post-translational modification, in which 3,4-dihydroxyphenylalanine was residue-specifically obtained efficiently from tyrosine with tyrosinase coexpressed in vivo. The rational designed chimeric protein coating in this work could successfully anchor to various substrates and exhibit excellent antifouling performance in resisting protein adsorption, cell attachment, and bacterial adhesion with eminent biocompatibility.

Combinational Biomimicking of Lotus Leaf, Mussel, and Sandcastle Worm for Robust Superhydrophobic Surfaces with Biomedical Multifunctionality: Antithrombotic, Antibiofouling, and Tissue Closure Capabilities

Surface wetting occurring in daily life causes undesired contaminations, which are critical issues in various fields. To solve these problems, the nonwetting property of a superhydrophobic (SH) surface has proven its utility by preventing contaminant infiltration, serious infections, or malfunction. However, the application of SH surfaces in the biomedical field has been limited due to the weak durability and toxicity of the related components. To overcome these limitations, we developed a robust and biocompatible SH surface through combinational biomimicking of three natural organisms, lotus leaf, mussel, and sandcastle worm, for the first time. Using the water-immiscible and polycationic characteristics of mussel adhesive protein (iMglue), an SH iMglue-SiO₂(TiO₂/SiO₂)₂ coating was fabricated by solution-based electrical charge-controlled layer-by-layer growth of nanoparticles (NPs). The fabricated iMglue-SiO₂(TiO₂/SiO₂)₂ SH surface showed excellent durable nonwetting properties and was applied to an intracatheter tube coating to develop antithrombotic catheters under blood flow. Furthermore, we developed a iMglue-employed SH patch for a tissue closure bandage by spraying hydrophobic SiO₂ NPs on the iMglue-covered cotton pads. The prepared iMglue-employing SH patch showed perfect bifunctionality with excellent antibiofouling and tissue closure capabilities. Our work presents a novel, useful strategy for fabricating a biomedically multifunctional, robust SH surface through combinational mimicking of natural organisms.

Prolonged cell persistence with enhanced multipotency and rapid angiogenesis of hypoxia pre-conditioned stem cells encapsulated in marine-inspired adhesive and immiscible liquid micro-droplets

Stem cell therapies are emerging regenerative treatments for ischemic and chronic diseases. Although high cell retention and prompt angiogenesis are prerequisites to improving efficacy, advancements have not yet been developed. Here, we proposed long-term surviving and angiogenesis-inducing stem cell with high cell retention thanks to fluid immiscible liquid micro-droplets bio-inspired by a glue modality 'complex coacervate' found in the sandcastle worm. Formed by the Coulombic force between polycationic MAP and polyanionic hyaluronic acid, the exploited coacervate micro-droplets enabled the encapsulation of stem cells. The underwater adhesiveness facilitated integrating the encapsulated stem cells onto various surfaces with impressive cell retention after facile injection. Stem cells encapsulated in the coacervate platform formed cell clusters capable of pre-adjusting to hypoxia by expressing hypoxia-inducible factor 1α (HIF-1α), increasing viability and reducing apoptosis under hypoxia and ischemia as well as normoxia. Interestingly, multipotent and angiogenic factors were significantly enhanced by HIF-1α expression. In the in vivo evaluation, the coacervate platform showed impressive angiogenesis with biocompatibility and long-term cell retention capacity with sustainable release as protein factories. Therefore, the proposed MAP-based water-immiscible, injectable, sticky, and bioactive 3D coacervate micro-droplets offers a promising tool for chronic diseases in body fluid-rich environments. STATEMENT OF SIGNIFICANCE: High cell retention, long-term survival, and rapid angiogenesis are prerequisites of successful stem cell therapy. However, no previous advancements have simultaneously satisfied all of these requirements. In this work, we clearly developed a novel, revolutionary stem cell carrier platform with underwater adhesiveness from a mussel-derived glue protein and water immiscibility from a sandcastle-worm-inspired glue modality via 'complex coacervation'. To the best of our knowledge, no report has emerged employing coacervate as a stem cell therapeutic platform. This fluid-immiscible, injectable, sticky, and bioactive 3-dimensional stem cell micro-droplets demonstrated the excellent stem cell retention and viability under hypoxia environments and enhanced multipotent and angiogenic effects with minimal immune response.

Sprayable Adhesive Nanotherapeutics: Mussel-Protein-Based Nanoparticles for Highly Efficient Locoregional Cancer Therapy

Following surgical resection for primary treatment of solid tumors, systemic chemotherapy is commonly used to eliminate residual cancer cells to prevent tumor recurrence. However, its clinical outcome is often limited due to insufficient local accumulation and the systemic toxicity of anticancer drugs. Here, we propose a sprayable adhesive nanoparticle (NP)-based drug delivery system using a bioengineered mussel adhesive protein (MAP) for effective locoregional cancer therapy. The MAP NPs could be administered to target surfaces in a surface-independent manner through a simple and easy spray process by virtue of their unique adhesion ability and sufficient dispersion property. Doxorubicin (DOX)-loaded MAP NPs (MAP@DOX NPs) exhibited efficient cellular uptake, endolysosomal trafficking, and subsequent low pH microenvironment-induced DOX release in cancer cells. The locally sprayed MAP@DOX NPs showed a significant inhibition of tumor growth in vivo, resulting from the prolonged retention of the MAP@DOX NPs on the tumor surface. Thus, this adhesive MAP NP-based spray therapeutic system provides a promising approach for topical drug delivery in adjuvant cancer therapy.

Natural healing-inspired collagen-targeting surgical protein glue for accelerated scarless skin regeneration

Skin scarring after deep dermal injuries is a major clinical problem due to the current therapies limited to established scars with poor understanding of healing mechanisms. From investigation of aberrations within the extracellular matrix involved in pathophysiologic scarring, it was revealed that one of the main factors responsible for impaired healing is abnormal collagen reorganization. Here, inspired by the fundamental roles of decorin, a collagen-targeting proteoglycan, in collagen remodeling, we created a scar-preventive collagen-targeting glue consisting of a newly designed collagen-binding mussel adhesive protein and a specific glycosaminoglycan. The collagen-targeting glue specifically bound to type I collagen in a dose-dependent manner and regulated the rate and the degree of fibrillogenesis. In a rat skin excisional model, the collagen-targeting glue successfully accelerated initial wound regeneration as defined by effective reepithelialization, neovascularization, and rapid collagen synthesis. Moreover, the improved dermal collagen architecture was demonstrated by uniform size of collagen fibrils, their regular packing, and a restoration of healthy tissue component. Collectively, our natural healing-inspired collagen-targeting glue may be a promising therapeutic option for improving the healing rate with high-quality and effective scar inhibition.

Mussel-inspired hydrogel tissue adhesives for wound closure

Tissue adhesives have been introduced as a promising alternative for the traditional wound closure method of suturing.

Proteomics: Technologies and Their Applications

Proteomics involves the applications of technologies for the identification and quantification of overall proteins present content of a cell, tissue or an organism. It supplements the other "omics" technologies such as genomic and transcriptomics to expound the identity of proteins of an organism, and to cognize the structure and functions of a particular protein. Proteomics-based technologies are utilized in various capacities for different research settings such as detection of various diagnostic markers, candidates for vaccine production, understanding pathogenicity mechanisms, alteration of expression patterns in response to different signals and interpretation of functional protein pathways in different diseases. Proteomics is practically intricate because it includes the analysis and categorization of overall protein signatures of a genome. Mass spectrometry with LC-MS-MS and MALDI-TOF/TOF being widely used equipment is the central among current proteomics. However, utilization of proteomics facilities including the software for equipment, databases and the requirement of skilled personnel substantially increase the costs, therefore limit their wider use especially in the developing world. Furthermore, the proteome is highly dynamic because of complex regulatory systems that control the expression levels of proteins. This review efforts to describe the various proteomics approaches, the recent developments and their application in research and analysis.

Adding Functions to Biomaterial Surfaces through Protein Incorporation

The concept of biomaterials has evolved from one of inert mechanical supports with a long-term, biologically inactive role in the body into complex matrices that exhibit selective cell binding, promote proliferation and matrix production, and may ultimately become replaced by newly generated tissues in vivo. Functionalization of material surfaces with biomolecules is critical to their ability to evade immunorecognition, interact productively with surrounding tissues and extracellular matrix, and avoid bacterial colonization. Antibody molecules and their derived fragments are commonly immobilized on materials to mediate coating with specific cell types in fields such as stent endothelialization and drug delivery. The incorporation of growth factors into biomaterials has found application in promoting and accelerating bone formation in osteogenerative and related applications. Peptides and extracellular matrix proteins can impart biomolecule- and cell-specificities to materials while antimicrobial peptides have found roles in preventing biofilm formation on devices and implants. In this progress report, we detail developments in the use of diverse proteins and peptides to modify the surfaces of hard biomaterials in vivo and in vitro. Chemical approaches to immobilizing active biomolecules are presented, as well as platform technologies for isolation or generation of natural or synthetic molecules suitable for biomaterial functionalization.

Protein Aggregation Formed by Recombinant cp19k Homologue of Balanus albicostatus Combined with an 18 kDa N-Terminus Encoded by pET-32a(+) Plasmid Having Adhesion Strength Comparable to Several Commercial Glues

The barnacle is well known for its tenacious and permanent attachment to a wide variety of underwater substrates, which is accomplished by synthesizing, secreting and curing a mixture of adhesive proteins termed “barnacle cement”. In order to evaluate interfacial adhesion abilities of barnacle cement proteins, the cp19k homologous gene in Balanus albicostatus (Balcp19k) was cloned and expressed in Escherichia coli. Here, we report an intriguing discovery of a gel-like super adhesive aggregation produced by Trx-Balcp19k, a recombinant Balcp19k fusion protein. The Trx-Balcp19k consists of an 18 kDa fragment at the N-terminus, which is encoded by pET-32a(+) plasmid and mainly comprised of a thioredoxin (Trx) tag, and Balcp19k at the C-terminus. The sticky aggregation was designated as “Trx-Balcp19k gel”, and the bulk adhesion strength, biochemical composition, as well as formation conditions were all carefully investigated. The Trx-Balcp19k gel exhibited strong adhesion strength of 2.10 ± 0.67 MPa, which was approximately fifty folds higher than that of the disaggregated Trx-Balcp19k (40 ± 8 kPa) and rivaled those of commercial polyvinyl acetate (PVA) craft glue (Mont Marte, Australia) and UHU glue (UHU GmbH & Co. KG, Germany). Lipids were absent from the Trx-Balcp19k gel and only a trace amount of carbohydrates was detected. We postulate that the electrostatic interactions play a key role in the formation of Trx-Balcp19k gel, by mediating self-aggregation of Trx-Balcp19k based on its asymmetric distribution pattern of charged amino acids. Taken together, we believe that our discovery not only presents a promising biological adhesive with potential applications in both biomedical and technical fields, but also provides valuable paradigms for molecular design of bio-inspired peptide- or protein-based materials.

Rapidly light-activated surgical protein glue inspired by mussel adhesion and insect structural crosslinking

Currently approved surgical tissue glues do not satisfy the requirements for ideal bioadhesives due to limited adhesion in wet conditions and severe cytotoxicity. Herein, we report a new light-activated, mussel protein-based bioadhesive (LAMBA) inspired by mussel adhesion and insect dityrosine crosslinking chemistry. LAMBA exhibited substantially stronger bulk wet tissue adhesion than commercially available fibrin glue and good biocompatibility in both in vitro and in vivo studies. Besides, the easily tunable, light-activated crosslinking enabled an effective on-demand wound closure and facilitated wound healing. Based on these outstanding properties, LAMBA holds great potential as an ideal surgical tissue glue for diverse medical applications, including sutureless wound closures of skin and internal organs.

Bioengineered mussel glue incorporated with a cell recognition motif as an osteostimulating bone adhesive for titanium implants

An engineered mussel glue MAP-RGD can be successfully used as a novel functional osteostimulating bone adhesive for titanium implants through improved osteoblastic cell behaviors, blood responses, and eventually enhanced bone regeneration.