Gene-enhanced tissue engineering for dental hard tissue regeneration: (2) dentin-pulp and periodontal regeneration

Transcriptomic profiling of human dental pulp cells treated with tricalcium silicate-based cements by RNA sequencing

OBJECTIVES

Tricalcium silicate (TCS)-based biomaterials induce differentiation of human dental pulp cells (hDPCs) into odontoblasts/osteoblasts, which is regulated by the interplay between various intracellular pathways and their resultant secretome. The aim of this study was to compare the transcriptome-wide effects by next-generation RNA sequencing of custom-prepared hDPCs stimulated with TCS-based biomaterials: ProRoot white MTA (WMTA) (Dentsply, Tulsa; Tulsa, OK) and Biodentine (Septodont, Saint Maur des Fosses, France).

METHODS

Self-isolated hDPCs were seeded in a 6-well plate at a density of 5 × 10⁵ cells per well. ProRoot white MTA and Biodentine were then placed in transwell inserts with a pore size of 0.4 μm and inserted in the well plate. RNA sequencing was performed after 3 and 7 days treatment. For post-validation, RT-PCR analyses were done on some of the RNA samples used for RNA sequencing.

RESULTS

Our RNA sequencing results for the first time identified 7533 differentially expressed genes (DEGs) between different treatments and the number of DEGs in Biodentine was higher than ProRoot WMTA at both 3 and 7 days. Despite their differential gene expression, both the TCS-based biomaterial treatments showed gene expressions mainly involved in odontoblast differentiation, angiogenesis, neurogenesis, dentinogenesis, and tooth mineralization.

CONCLUSIONS

The results of the present study illustrate that several important signalling pathways are induced by hDPCs stimulated with TCS-based biomaterials.

CLINICAL RELEVANCE

The differential expression of the genes associated with odontogenesis, angiogenesis, neurogenesis, dentinogenesis, and mineralization may affect the prognosis of teeth treated with Biodentine or ProRoot white MTA.

Reparative Dentin Formation Using Stem Cell Therapy versus Calcium Hydroxide in Direct Pulp Capping: An Animal Study

Direct pulp capping process is a therapeutic method aimed at maintenance of pulp vitality and health by using a biocompatible material placed directly over the exposed pulp. The aim of this study was to evaluate and compare the effect of direct pulp capping procedures by dental pulp stem cells (DPSCs) or calcium hydroxide on dentin tissue formation. Three mongrel dogs were used as experimental model. Two access cavities were prepared in the right and left mandibular fourth premolars in all dogs to expose and extirpate the pulp tissues which were processed in the lab to obtain a single-cell suspensions. The isolated cells were cultures in odontogenic medium for subsequent differentiation. The maxillary teeth (3 incisors and one canine) of the corresponding dog number were subjected to class V cavities to expose their pulps which were assigned into 2 groups of 12 teeth each ( group I - pulp capping with calcium hydroxide) and (group II - pulp capping with dental stem cells DPSCs). The operated teeth were collected after 3 months and processed for histological and electron microscopic examinations. Specimens were subjected to elemental analysis of calcium and phosphorus. EDX elemental analysis revealed significant differences in the calcium and phosphorous wt, % in the reparative dentin of calcium hydroxide treated group which confirmed histologically. Direct pulp capping by DPSCs has shown promising generative potential for regaining normal dentin.

Remineralization, Regeneration, and Repair of Natural Tooth Structure: Influences on the Future of Restorative Dentistry Practice

Currently, the principal strategy for the treatment of carious defects involves cavity preparations followed by the restoration of natural tooth structure with a synthetic material of inferior biomechanical and esthetic qualities and with questionable long-term clinical reliability of the interfacial bonds. Consequently, prevention and minimally invasive dentistry are considered basic approaches for the preservation of sound tooth structure. Moreover, conventional periodontal therapies do not always ensure predictable outcomes or completely restore the integrity of the periodontal ligament complex that has been lost due to periodontitis. Much effort and comprehensive research have been undertaken to mimic the natural development and biomineralization of teeth to regenerate and repair natural hard dental tissues and restore the integrity of the periodontium. Regeneration of the dentin-pulp tissue has faced several challenges, starting with the basic concerns of clinical applicability. Recent technologies and multidisciplinary approaches in tissue engineering and nanotechnology, as well as the use of modern strategies for stem cell recruitment, synthesis of effective biodegradable scaffolds, molecular signaling, gene therapy, and 3D bioprinting, have resulted in impressive outcomes that may revolutionize the practice of restorative dentistry. This Review covers the current approaches and technologies for remineralization, regeneration, and repair of natural tooth structure.

Gold nanoparticles promote osteogenic differentiation of human periodontal ligament stem cells via the p38 MAPK signaling pathway

Gold nanoparticles (AuNPs) are a promising material for use in regenerative medicine due to their biocompatibility and easy functionalization with biomolecules including growth factors, DNA and peptides. In the present study, transmission electron microscopy indicated that the AuNPs were monodisperse and spherical in shape, with an estimated average diameter of 13 nm. And the cellular effects of AuNPs on the osteogenic differentiation of human periodontal ligament stem cells (hPDLSCs) and the associated signaling pathways in cell differentiation were investigated based on histochemical analysis of alkaline phosphatase activity and mineralization, quantitative polymerase chain reaction, and western blotting. The results indicated that AuNPs enhanced the differentiation of hPDLSCs into osteoblasts, increasing their osteogenic transcriptional profile including alkaline phosphatase, osterix, collagen type I and runt‑related transcription factor 2 (RUNX2) and activating the p38 mitogen‑activated protein kinase (MAPK) signaling pathway. Furthermore, AuNPs increased the protein level of RUNX2, which is crucial for osteogenic differentiation. These results suggested that AuNPs stimulate the osteogenesis of hPDLSCs partially via activation of the p38 MAPK signaling pathway.

Bone marrow mesenchymal stem cells combine with Treated dentin matrix to build biological root

Treated dentin matrix (TDM) as a kind of scaffolding material has been proved odontogenic induction ability on dental-derived stem cells. Given the limited resources of dental stem cells, it is necessary to seek new seed cell which easily obtained. Jaw bone marrow mesenchymal stem cell (JBMMSC) as non-dental-derived stem cell relates to the development of teeth and jaws which suggest us JBMMSCs could act as a new seed cell for tooth tissue engineering. To assess the odontogenic and osteogenic potential of JBMMSCs, cells were induced by TDM extraction in vitro and combined with TDM in vivo. Results were analyzed by PCR, Western Blotting and histology. PCR and Western Blotting showed odontogenic and osteogenic makers were significantly enhanced in varying degrees after induced by TDM extraction in vitro. In vivo, JBMMSCs expressed both odontogenic and osteogenic-related protein, and the latter showed stronger positive expression. Furthermore, histological examination of the harvested grafts was observed the formation of bone-like tissue. Therefore, osteogenic differentiation ability of JBMMSCs were enhanced significantly after being inducted by TDM which illustrates that non-odontogenic derived stem cells are still promising seed cells in tooth root tissue engineering.

Gene Therapy for Bone Defects in Oral and Maxillofacial Surgery: A Systematic Review and Meta-Analysis of Animal Studies

Craniofacial bone defects are challenging problems for maxillofacial surgeons over the years. With the development of cell and molecular biology, gene therapy is a breaking new technology with the aim of regenerating tissues by acting as a delivery system for therapeutic genes in the craniofacial region rather than treating genetic disorders. A systematic review was conducted summarizing the articles reporting gene therapy in maxillofacial surgery to answer the question: Was gene therapy successfully applied to regenerate bone in the maxillofacial region? Electronic searching of online databases was performed in addition to hand searching of the references of included articles. No language or time restrictions were enforced. Meta-analysis was done to assess significant bone formation after delivery of gene material in the surgically induced maxillofacial defects. The search identified 2081 articles, of which 57 were included with 1726 animals. Bone morphogenetic proteins were commonly used proteins for gene therapy. Viral vectors were the universally used vectors. Sprague-Dawley rats were the frequently used animal model in experimental studies. The quality of the articles ranged from excellent to average. Meta-analysis results performed on 21 articles showed that defects favored bone formation by gene therapy. Funnel plot showed symmetry with the absence of publication bias. Gene therapy is on the top list of innovative strategies that developed in the last 10 years with the hope of developing a simple chair-side protocol in the near future, combining improvement of gene delivery as well as knowledge of the molecular basis of oral and maxillofacial structures.

Nanomaterials for Tissue Engineering In Dentistry

The tissue engineering (TE) of dental oral tissue is facing significant changes in clinical treatments in dentistry. TE is based on a stem cell, signaling molecule, and scaffold triad that must be known and calibrated with attention to specific sectors in dentistry. This review article shows a summary of micro- and nanomorphological characteristics of dental tissues, of stem cells available in the oral region, of signaling molecules usable in TE, and of scaffolds available to guide partial or total reconstruction of hard, soft, periodontal, and bone tissues. Some scaffoldless techniques used in TE are also presented. Then actual and future roles of nanotechnologies about TE in dentistry are presented.

Dynamic Mechanical and Nanofibrous Topological Combinatory Cues Designed for Periodontal Ligament Engineering

Complete reconstruction of damaged periodontal pockets, particularly regeneration of periodontal ligament (PDL) has been a significant challenge in dentistry. Tissue engineering approach utilizing PDL stem cells and scaffolding matrices offers great opportunity to this, and applying physical and mechanical cues mimicking native tissue conditions are of special importance. Here we approach to regenerate periodontal tissues by engineering PDL cells supported on a nanofibrous scaffold under a mechanical-stressed condition. PDL stem cells isolated from rats were seeded on an electrospun polycaprolactone/gelatin directionally-oriented nanofiber membrane and dynamic mechanical stress was applied to the cell/nanofiber construct, providing nanotopological and mechanical combined cues. Cells recognized the nanofiber orientation, aligning in parallel, and the mechanical stress increased the cell alignment. Importantly, the cells cultured on the oriented nanofiber combined with the mechanical stress produced significantly stimulated PDL specific markers, including periostin and tenascin with simultaneous down-regulation of osteogenesis, demonstrating the roles of topological and mechanical cues in altering phenotypic change in PDL cells. Tissue compatibility of the tissue-engineered constructs was confirmed in rat subcutaneous sites. Furthermore, in vivo regeneration of PDL and alveolar bone tissues was examined under the rat premaxillary periodontal defect models. The cell/nanofiber constructs engineered under mechanical stress showed sound integration into tissue defects and the regenerated bone volume and area were significantly improved. This study provides an effective tissue engineering approach for periodontal regeneration—culturing PDL stem cells with combinatory cues of oriented nanotopology and dynamic mechanical stretch.

Frequently asked questions in direct pulp capping of permanent teeth

Direct pulp capping is a proven method of preserving tooth vitality of a mature permanent tooth in cases of pulp exposures. The indications for this treatment, treatment modalities and materials are discussed in this paper.

CLINICAL RELEVANCE

This paper answers many of the frequently asked questions by general practitioners, dental students and specialists about direct pulp capping.

Dentin-like tissue formation and biomineralization by multicellular human pulp cell spheres in vitro

Introduction

Maintaining or regenerating a vital pulp is a preferable goal in current endodontic research. In this study, human dental pulp cell aggregates (spheres) were applied onto bovine and human root canal models to evaluate their potential use as pre-differentiated tissue units for dental pulp tissue regeneration.

Methods

Human dental pulp cells (DPC) were derived from wisdom teeth, cultivated into three-dimensional cell spheres and seeded onto bovine and into human root canals. Sphere formation, tissue-like and mineralization properties as well as growth behavior of cells on dentin structure were evaluated by light microscopy (LM), confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX).

Results

Spheres and outgrown cells showed tissue-like properties, the ability to merge with other cell spheres and extra cellular matrix formation; CLSM investigation revealed a dense network of actin and focal adhesion contacts (FAC) inside the spheres and a pronounced actin structure of cells outgrown from the spheres. A dentin-structure-orientated migration of the cells was shown by SEM investigation. Besides the direct extension of the cells into dentinal tubules, the coverage of the tubular walls with cell matrix was detected. Moreover, an emulation of dentin-like structures with tubuli-like and biomineral formation was detected by SEM- and EDX-investigation.

Conclusions

The results of the present study show tissue-like behavior, the replication of tubular structures and the mineralization of human dental pulp spheres when colonized on root dentin. The application of cells in form of pulp spheres on root dentin reveals their beneficial potential for dental tissue regeneration.

Adipose-derived stem cells transfected with pEGFP-OSX enhance bone formation during distraction osteogenesis

This study was designed to investigate the effects of local delivery of adipose-derived stem cells (ADSCs) transfected with transcription factor osterix (OSX) on bone formation during distraction osteogenesis. New Zealand white rabbits (n=54) were randomly divided into three groups (18 rabbits per group). A directed cloning technique was used for the construction of recombinant plasmid pEGFP-OSX, where EGFP is the enhanced green fluorescence protein. After osteodistraction of the right mandible of all experimental rabbits, rabbits in group A were treated with ADSCs transfected with pEGFP-OSX, group B with ADSCs transfected with pEGFP-N1, and group C with physiological saline. Radiographic and histological examinations were processed after half of the animals within each group were humanely killed by injection of sodium pentothal at Week 2 or 6 after surgery. The distraction bone density was measured as its projectional bone mineral density (BMD). Three parameters were measured, namely, the thickness of new trabeculae (TNT), and the volumes of the newly generated cortical bone (NBV1) and the cancellous bone (NBV2) of the distracted regions. Good bone generation in the distraction areas was found in group A, which had the highest BMD, TNT, and NBV in the distraction zones among the groups. There was no significant difference in bone generation in the distraction areas between groups B and C. The results indicate that the transplantation of ADSCs transfected with pEGFP-OSX can effectively promote bone generation during distraction in vivo.

Pulp tissue from primary teeth: new source of stem cells

SHED (stem cells from human exfoliated deciduous teeth) represent a population of postnatal stem cells capable of extensive proliferation and multipotential differentiation. Primary teeth may be an ideal source of postnatal stem cells to regenerate tooth structures and bone, and possibly to treat neural tissue injury or degenerative diseases. SHED are highly proliferative cells derived from an accessible tissue source, and therefore hold potential for providing enough cells for clinical applications. In this review, we describe the current knowledge about dental pulp stem cells and discuss tissue engineering approaches that use SHED to replace irreversibly inflamed or necrotic pulps with a healthy and functionally competent tissue that is capable of forming new dentin.

Periodontal tissue engineering and regeneration: current approaches and expanding opportunities

The management of periodontal tissue defects that result from periodontitis represents a medical and socioeconomic challenge. Concerted efforts have been and still are being made to accelerate and augment periodontal tissue and bone regeneration, including a range of regenerative surgical procedures, the development of a variety of grafting materials, and the use of recombinant growth factors. More recently, tissue-engineering strategies, including new cell- and/or matrix-based dimensions, are also being developed, analyzed, and employed for periodontal regenerative therapies. Tissue engineering in periodontology applies the principles of engineering and life sciences toward the development of biological techniques that can restore lost alveolar bone, periodontal ligament, and root cementum. It is based on an understanding of the role of periodontal formation and aims to grow new functional tissues rather than to build new replacements of periodontium. Although tissue engineering has merged to create more opportunities for predictable and optimal periodontal tissue regeneration, the technique and design for preclinical and clinical studies remain in their early stages. To date, the reconstruction of small- to moderate-sized periodontal bone defects using engineered cell-scaffold constructs is technically feasible, and some of the currently developed concepts may represent alternatives for certain ideal clinical scenarios. However, the predictable reconstruction of the normal structure and functionality of a tooth-supporting apparatus remains challenging. This review summarizes current regenerative procedures for periodontal healing and regeneration and explores their progress and difficulties in clinical practice, with particular emphasis placed upon current challenges and future possibilities associated with tissue-engineering strategies in periodontal regenerative medicine.

Engineering craniofacial structures: facing the challenge

The human innate regenerative ability is known to be limited by the intensity of the insult together with the availability of progenitor cells, which may cause certain irreparable damage. It is only recently that the paradigm of tissue engineering found its way to the treatment of irreversibly affected body structures with the challenge of reconstructing the lost part. In the current review, we underline recent trials that target engineering of human craniofacial structures, mainly bone, cartilage, and teeth. We analyze the applied engineering strategies relative to the selection of cell types to lay down a specific targeted tissue, together with their association with an escorting scaffold for a particular engineered site, and discuss their necessity to be sustained by growth factors. Challenges and expectations for facial skeletal engineering are discussed in the context of future treatment.

Osterix overexpression enhances osteoblast differentiation of muscle satellite cells in vitro

Muscle satellite cells have long been considered a distinct myogenic lineage responsible for postnatal growth, repair and maintenance of skeletal muscle. Recent studies have demonstrated that they are multi-potential. Osterix (Osx), a novel zinc-finger-containing transcription factor of the sp family, is required for osteoblast differentiation and bone formation. It was hypothesized that Osx overexpression would enhance osteoblast differentiation of muscle satellite cells in vitro. Recombinant adenovirus-mediated Osx gene (Ad-Osx) was constructed and used to transfect muscle satellite cells. Osx overexpression inhibited myogenesis, as demonstrated by suppression of MyoD and myogenin mRNA levels and reduced myotube formation. Muscle satellite cells transduced with Ad-Osx exhibited apparent osteoblast differentiation as determined by the expression of related osteoblastic genes, increased activity of alkaline phosphatase and the formation of mineralized nodules. These results confirmed the ability of Osx to enhance osteoblast differentiation of muscle satellite cells in vitro, and the competence of muscle satellite cells as promising seed cells for bone tissue engineering.