In vitro and in vivo evaluation of orthopedic interface repair using a tissue scaffold with a continuous hard tissue-soft tissue transition

Optimizing Tissue Engineering for Clinical Relevance in Rotator Cuff Repair

Rotator cuff tear (RCT) is the most common cause of disability in the upper extremity. It results in 4.5 million physician visits in the United States every year and is the most common etiology of shoulder conditions evaluated by orthopedic surgeons. Over 460,000 RCT repair surgeries are performed in the United States annually. Rotator cuff (RC) retear and failure to heal remain significant postoperative complications. Literature suggests that the retear rates can range from 29.5% to as high as 94%. Weakened and irregular enthesis regeneration is a crucial factor in postsurgical failure. Although commercially available RC repair grafts have been introduced to augment RC enthesis repair, they have been associated with mixed clinical outcomes. These grafts lack appropriate biological cues such as stem cells and signaling molecules at the bone-tendon interface. In addition, they do little to prevent fibrovascular scar tissue formation, which causes the RC to be susceptible to retear. Advances in tissue engineering have demonstrated that mesenchymal stem cells (MSCs) and growth factors (GFs) enhance RC enthesis regeneration in animal models. These models show that delivering MSCs and GFs to the site of RCT enhances native enthesis repair and leads to greater mechanical strength. In addition, these models demonstrate that MSCs and GFs may be delivered through a variety of methods including direct injection, saturation of repair materials, and loaded microspheres. Grafts that incorporate MSCs and GFs enhance anti-inflammation, osteogenesis, angiogenesis, and chondrogenesis in the RC repair process. It is crucial that the techniques that have shown success in animal models are incorporated into the clinical setting. A gap currently exists between the promising biological factors that have been investigated in animal models and the RC repair grafts that can be used in the clinical setting. Future RC repair grafts must allow for stable implantation and fixation, be compatible with current arthroscopic techniques, and have the capability to deliver MSCs and/or GFs.

The effects of heat and hydrogen peroxide treatment on the osteoinductivity of demineralized cortical bone: a potential method for preparing tendon/ligament repair scaffolds

Recent studies have indicated that demineralized cortical bone (DCB) may be used to repair tendons and ligaments, such as the patellar tendon and anterior cruciate ligament (ACL). Hydrogen peroxide (H2O2) has been shown to reduce the osteoinductivity of DCB, and heat treatment may also decrease the osteoinductivity of DCB. The purpose of this study was (i) to determine whether heat treatment reduces the osteoinductivity of DCB and (ii) to compare the effectiveness of heat treatment and H2O2 treatment on BMP-2 inactivation. DCB was prepared by immersion in 0.6 N hydrochloric acid, and DCB-H and DCB-HO were prepared by heat treatment (70°C for 8 h) and H2O2 treatment (3% H2O2 for 8 h), respectively. The surface topographies, elemental distributions and histological structures of the scaffolds were observed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and histological staining. The viability and osteogenic differentiation of TDSCs cultured on the scaffolds were evaluated via live/dead cell staining and Cell Counting Kit-8 (CCK-8) testing, real-time polymerase chain reaction (RT-PCR) and western bolt (WB) analysis, alkaline phosphatase activity (ALP) and alizarin red S (ARS) staining. The intramuscular implantation of the scaffolds in rats was also used to evaluate the effect of heat treatment and H2O2 treatment on the osteoinductivity of DCB. Our results demonstrated that both treatments removed BMP-2 and osteocalcin (OCN) within the DCB and that DCB-H and DCB-HO had good cytocompatibility and reduced the osteogenic differentiation of TDSCs. Moreover, the in vivo results indicated that the DCB-H and DCB-HO groups had smaller areas of osteoid formation than did the DCB group, and the DCB-HO group had the smallest area among the three groups. Our study demonstrated that heat treatment could reduce the osteoinductivity of DCB, and that H2O2 treatment was more effective than heat treatment.

Inlay Scaffold Augmentation of Rotator Cuff Repairs Enhances Histologic Resemblance to Native Enthesis in Animal Studies: A Systematic Review

PURPOSE

To investigate the outcomes of inlay positioned scaffolds for rotator cuff healing and regeneration of the native enthesis after augmentation of rotator cuff tendon repairs in preclinical studies.

METHODS

A literature search was performed using the PubMed, Embase, and Cumulative Index to Nursing and Allied Health Literature databases according to Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines. Preclinical studies reporting on outcomes after inlay tendon augmentation in rotator cuff repair were included. Preclinical study quality was assessed using an adapted version of the Gold Standard Publication Checklist for animal studies. The level of evidence was defined based on the inclusion of clinical analyses (grade A), biomechanical analyses (grade B), biochemical analyses (grade C), semiquantitative analyses (grade D), and qualitative histologic analyses (grade E).

RESULTS

Thirteen preclinical studies met the inclusion criteria. Quality assessment scores ranged from 4 to 8 points, and level-of-evidence grades ranged from B to E. Sheep/ewes were the main animal rotator cuff tear model used (n = 7). Demineralized bone matrix or demineralized cortical bone was the most commonly investigated scaffold (n = 6). Most of the preclinical evidence (n = 10) showed qualitative or quantitative differences regarding histologic, biomechanical, and biochemical outcomes in favor of interpositional scaffold augmentation of cuff repairs in comparison to controls.

CONCLUSIONS

Inlay scaffold positioning in preclinical studies has been shown to enhance the healing biology of the enthesis while providing histologic similarities to its native 4-zone configuration.

CLINICAL RELEVANCE

Although onlay positioned grafts and scaffolds have shown mixed results in preclinical and early clinical studies, inlay scaffolds may provide enhanced healing and structural support in comparison owing to the ability to integrate with the bone-tendon interface.

Indications and Technique: Rotator Cuff Repair Augmentation

Rotator cuff repair (RCR) augmentation is often considered for patients with large-to-massive rotator cuff tears or chronic tears with poor tissue quality. Augmentation can provide mechanical stability and improved biology to improve the likelihood of a successful repair. This article discusses the indications, diagnosis, surgical techniques, and outcomes for RCR augmentation using an acellular dermal allograft, partially demineralized cancellous allograft, dermal xenograft, bone marrow aspirate concentrate, and platelet-rich plasma.

Novel Osteochondral Biotemplate Improves Long-term Cartilage Repair Compared With Microfracture in an Ovine Model

BACKGROUND

Current cartilage repair therapies do not re-create the complex mechanical interface between cartilage and bone, which is critical for long-term repair durability. New biomaterial designs that include hard tissue-soft tissue interface structures offer promise to improve clinical outcomes.

PURPOSE/HYPOTHESIS

The purpose of this study was to evaluate the efficacy and safety of a naturally derived osteochondral biotemplate with a novel contiguous hard tissue-soft tissue interface in an ovine model as a regenerative solution for articular cartilage defects. It was hypothesized that the osteochondral biotemplate would produce structurally superior repair tissue compared with microfracture over a 13-month period.

STUDY DESIGN

Controlled laboratory study.

METHODS

Osteochondral biotemplates were manufactured from porcine cancellous bone. Skeletally mature sheep (N = 30) were randomly allocated to 3 groups: early healing stage (euthanasia at 4 months), 6-month treatment, and 13-month treatment. In the early healing stage group, an 8 mm-diameter by 5 mm-deep osteochondral defect was created on the medial femoral condyle and treated at the time of iatrogenic injury with an osteochondral biotemplate. The contralateral limb received the same treatment 2 months later. In the 6- and 13-month treatment groups, 1 limb received the same osteochondral procedure as the early healing stage group. In the contralateral limb, an 8 mm-diameter, full-thickness cartilage defect (1-2 mm deep) was created and treated with microfracture. Cartilage repair and integration were quantitatively and qualitatively assessed with gross inspection, histological evaluation, and magnetic resonance imaging (MRI). Wilcoxon signed-rank and McNemar tests were used to compare the treatments.

RESULTS

At 6 and 13 months after treatment, the biotemplate was not present histologically. At 13 months, the biotemplate treatment demonstrated statistically higher histological scores than microfracture for integration with surrounding cartilage (biotemplate: 74 ± 31; microfracture: 28 ± 39; P = .03), type 2 collagen (biotemplate: 72 ± 33; microfracture: 40 ± 38; P = .02), total cartilage (biotemplate: 71 ± 9; microfracture: 59 ± 9; P = .01), and total integration (biotemplate: 85 ± 15; microfracture: 66 ± 20; P = .04). The osteochondral biotemplate treatment produced a notable transient nonneutrophilic inflammatory response that appeared to approach resolution at 13 months. MRI results were not statistically different between the 2 treatments.

CONCLUSION

Even with the inflammatory response, after 13 months, the osteochondral biotemplate outperformed microfracture in cartilage regeneration and demonstrated superiority in integration between the repair tissue and host tissue as well as integration between the newly formed cartilage and the underlying bone.

CLINICAL RELEVANCE

This work has demonstrated the clinical potential of a novel biomaterial template to regenerate the complex mechanical interface between cartilage and the subchondral bone.

Biphasic Interpositional Allograft for Rotator Cuff Repair Augmentation Is Safe in an Ovine Model

PURPOSE

To perform a preclinical histologic assessment of a biphasic acellular interpositional cancellous allograft in an ovine model of rotator cuff repair (RCR) designed to better understand its safety profile and effects on tendon healing after RCR.

METHODS

Thirty skeletally mature sheep with clinically normal shoulders with an artificially created degenerative infraspinatus tendon tear were randomized to control and treatment groups. Animals were euthanized at 3 weeks, 6 weeks, and 12 weeks. After gross dissection, rotator cuff specimens were fixed with formalin and polymerized for sectioning and staining. Blinded histologic scores evaluated inflammatory cell infiltrates, signs of degradation, particulate debris, collagen arrangement, neovascularization, and enthesis qualitative measures.

RESULTS

There were no treatment specimens that exhibited histologic signs of a significant infection, inflammatory infiltrate, or foreign body reaction such as granuloma or fibrous capsule formation. Histologic scores in all categories were not significantly different at all time points, including the primary end point mean cumulative inflammatory score (control: 3.66 ± 1.21 vs treated: 4.33 ± 1.51, P = .42), when comparing the treatment and control RCR groups. In general, the degree of tendon healing and host tissue response was essentially equivalent between the 2 groups with observation of low overall levels of inflammation and progressive improvements in collagen organization, reduced tenocyte activity, and fibrocartilaginous enthesis reformation.

CONCLUSIONS

This histologic study demonstrated the use of a biphasic interpositional allograft for RCR augmentation in an ovine model does not generate an inflammatory response or foreign body reaction. Use of the biphasic interpositional allograft resulted in a histological profile that was essentially equivalent to that of a standard RCR at 3-, 6-, and 12-week postoperative timepoints. These findings suggest that a biphasic interpositional allograft is safe for further clinical investigation in humans before broader clinical application.

CLINICAL RELEVANCE

Patch augmentation of RCR is a popular technique that has shown clinical success in improving the likelihood of a successful repair in patients at elevated risk for retear. Newer augmentation technologies are being developed to address the biology at the interface between the bone and soft tissue where failure typically occurs.

Polysaccharide-Based Composite Scaffolds for Osteochondral and Enthesis Regeneration

The rotator cuff and Achilles tendons along with the anterior cruciate ligament (ACL) are frequently injured with limited healing capacity. At the soft-hard tissue interface, enthesis is prone to get damaged and its regeneration in osteochondral defects is essential for complete healing. The current clinical techniques used in suturing procedures to reattach tendons to bones need much improvement for the generation of the native interface tissue, that is, enthesis, for patients to regain their full functions. Recently, inspired by the composite native tissue, much effort has been made to fabricate composite scaffolds for enthesis tissue regeneration. This review first focuses on the studies that used composite scaffolds for the regeneration of enthesis. Then, the use of polysaccharides for osteochondral tissue engineering is reviewed and their potential for enthesis regeneration is presented based on their supporting effects on osteogenesis and chondrogenesis. Gellan gum (GG) is selected and reviewed as a promising polysaccharide due to its unique osteogenic and chondrogenic activities that help avoid the inherent weakness of dissimilar materials in composite scaffolds. In addition, original preliminary results showed that GG supports collagen type I production and upregulation of osteogenic marker genes. Impact Statement Enthesis regeneration is essential for complete and functional healing of tendon and ligament tissues. Current suturing techniques to reattach the tendon/ligament to bones have high failure rates. This review highlights the studies on biomimetic scaffolds aimed to regenerate enthesis. In addition, the potential of using polysaccharides to regenerate enthesis is discussed based on their ability to regenerate osteochondral tissues. Gellan gum is presented as a promising biopolymer that can be modified to simultaneously support bone and cartilage regeneration by providing structural continuity for the scaffold.

Scaffold-based tissue engineering strategies for soft-hard interface regeneration

Repairing injured tendon or ligament attachments to bones (enthesis) remains costly and challenging. Despite superb surgical management, the disorganized enthesis newly formed after surgery accounts for high recurrence rates after operations. Tissue engineering offers efficient alternatives to promote healing and regeneration of the specialized enthesis tissue. Load-transmitting functions thus can be restored with appropriate biomaterials and engineering strategies. Interestingly, recent studies have focused more on microstructure especially the arrangement of fibers since Rossetti successfully demonstrated the variability of fiber underspecific external force. In this review, we provide an important update on the current strategies for scaffold-based tissue engineering of enthesis when natural structure and properties are equally emphasized. We firstly described compositions, structures and features of natural enthesis with their special mechanical properties highlighted. Stimuli for growth, development and healing of enthesis widely used in popular strategies are systematically summarized. We discuss the fabrication of engineering scaffolds from the aspects of biomaterials, techniques and design strategies and comprehensively evaluate the advantages and disadvantages of each strategy. At last, this review pinpoints the remaining challenges and research directions to make breakthroughs in further studies.

Arthroscopic Rotator Cuff Repair with Biphasic Interpositional Allograft Augmentation

Rotator cuff repair in the setting of a chronic tear or poor tissue quality presents a surgical challenge because of the high risk of structural failure. Patients with an increased risk of retear may be candidates for enthesis augmentation with a novel, biphasic allograft, composed of a demineralized cancellous matrix with a layer of mineralized bone. This interpositional graft was designed with the intention to promote both soft-tissue and osseous integration into the matrix, thereby conferring greater stability and regeneration of the transitional zone of the rotator cuff enthesis. Here, we describe a technique for a transosseous-equivalent supraspinatus repair with placement of a biphasic interpositional allograft.

Segmentally Demineralized Cortical Bone With Stem Cell-Derived Matrix Promotes Proliferation, Migration and Differentiation of Stem Cells in vitro

A recent study has shown that demineralized cortical bone (DCB) did not improve the healing of tendon-bone interface. Considering that there is a gradient of mineral content in the tendon-bone interface, we designed a segmentally demineralized cortical bone (sDCB) scaffold with two different regions: undemineralized cortical bone section within the scaffold (sDCB-B) and complete demineralized cortical bone section within the scaffold (sDCB-D), to mimic the natural structure of the tendon-bone interface. Furthermore, the extracellular matrix (ECM) from tendon-derived stem cells (TDSCs) was used to modify the sDCB-D region of sDCB to construct a novel scaffold (sDCB-ECM) for enhancing the bioactivity of the sDCB-D. The surface topography, elemental distribution, histological structure, and surface elastic modulus of the scaffold were observed using scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, histological staining and atomic force microscopy. Cell proliferation of bone marrow mesenchymal stem cells (BMSCs) and TDSCs cultured on scaffolds was evaluated using the Cell Counting kit-8, and cell viability was assessed by Live/Dead cell staining. Cell morphology was detected by fluorescent staining. The ability of the scaffolds to recruit stem cells was tested using transwell migration assay. The expression levels of bone-, cartilage- and tendon-related genes and proteins in stem cells were assessed by the polymerase chain reaction and western blotting. Our results demonstrated that there was a gradient of Ca and P elements in sDCB, and TDSC-derived ECM existed on the surface of the sDCB-D region of sDCB. The sDCB-ECM could promote stem cell proliferation and migration. Moreover, the sDCB-B region of sDCB-ECM could stimulate osteogenic and chondrogenic differentiation of BMSCs, and the sDCB-D-ECM region of sDCB-ECM could stimulate chondrogenic and tenogenic differentiation of TDSCs when compared to DCB. Our study indicated that sDCB-ECM might be a potential bioscaffold to enhance the tendon-bone interface regeneration.

Hierarchically Demineralized Cortical Bone Combined With Stem Cell-Derived Extracellular Matrix for Regeneration of the Tendon-Bone Interface

BACKGROUND

Poor healing of the tendon-bone interface after rotator cuff repair is one of the main causes of surgical failure. Previous studies demonstrated that demineralized cortical bone (DCB) could improve healing of the enthesis.

PURPOSE

To evaluate the outcomes of hierarchically demineralized cortical bone (hDCB) coated with stem cell-derived extracellular matrix (hDCB-ECM) in the repair of the rotator cuff in a rabbit model.

STUDY DESIGN

Controlled laboratory study.

METHODS

Tendon-derived stem cells (TDSCs) were isolated, cultured, and identified. Then, hDCB was prepared by the graded demineralization procedure. Finally, hDCB-ECM was fabricated via 2-week cell culture and decellularization, and the morphologic features and biochemical compositions of the hDCB-ECM were evaluated. A total of 24 rabbits (48 samples) were randomly divided into 4 groups: control, DCB, hDCB, and hDCB-ECM. All rabbits underwent bilateral detachment of the infraspinatus tendon, and the tendon-bone interface was repaired with or without scaffolds. After surgery, 8 rabbits were assessed by immunofluorescence staining at 2 weeks, and the others were assessed by micro-computed tomography (CT) examination, immunohistochemical staining, histological staining, and biomechanical testing at 12 weeks.

RESULTS

TDSCs were identified to have universal stem cell characteristics including cell markers, clonogenicity, and multilineage differentiation. The hDCB-ECM contained 3 components (bone, partial DCB, and DCB coated with ECM) with a gradient of calcium and phosphorus elements, and the ECM had stromal cell-derived factor 1, biglycan, and fibromodulin. Macroscopic observations demonstrated the absence of infection and rupture around the enthesis. The results of immunofluorescence staining showed that hDCB-ECM promoted stromal cell recruitment. Results of micro-CT analysis, immunohistochemical staining, and histological staining showed that hDCB-ECM enhanced bone and fibrocartilage formation at the tendon-bone interface. Biomechanical analysis showed that the hDCB-ECM group had higher ultimate tensile stress and Young modulus than the DCB group.

CONCLUSION

The administration of hDCB-ECM promoted healing of the tendon-bone interface.

CLINICAL RELEVANCE

hDCB-ECM could provide useful information for the design of scaffolds to repair the tendon-bone interface, and further studies are needed to determine its effectiveness.

Biomimetic strategies for tendon/ligament-to-bone interface regeneration

Tendon/ligament-to-bone healing poses a formidable clinical challenge due to the complex structure, composition, cell population and mechanics of the interface. With rapid advances in tissue engineering, a variety of strategies including advanced biomaterials, bioactive growth factors and multiple stem cell lineages have been developed to facilitate the healing of this tissue interface. Given the important role of structure-function relationship, the review begins with a brief description of enthesis structure and composition. Next, the biomimetic biomaterials including decellularized extracellular matrix scaffolds and synthetic-/natural-origin scaffolds are critically examined. Then, the key roles of the combination, concentration and location of various growth factors in biomimetic application are emphasized. After that, the various stem cell sources and culture systems are described. At last, we discuss unmet needs and existing challenges in the ideal strategies for tendon/ligament-to-bone regeneration and highlight emerging strategies in the field.

Nanofiber-based matrices for rotator cuff regenerative engineering

The rotator cuff consists of a cuff of soft tissue responsible for rotating the shoulder. Rotator cuff tendon tears are responsible for a significant source of disability and pain in the adult population. Most rotator cuff tendon tears occur at the bone-tendon interface. Tear size, patient age, fatty infiltration of muscle, have a major influence on the rate of retear after surgical repair. The high incidence of retears (up to 94% in some studies) after surgery makes rotator cuff injuries a critical musculoskeletal problem to address. The limitations of current treatments motivate regenerative engineering approaches for rotator cuff regeneration. Various fiber-based matrices are currently being investigated due to their structural similarity with native tendons and their ability to promote regeneration. This review will discuss the current approaches for rotator cuff regeneration, recent advances in fabrication and enhancement of nanofiber-based matrices and the development and use of complex nano/microstructures for rotator cuff regeneration. STATEMENT OF SIGNIFICANCE: Regeneration paradigms for musculoskeletal tissues involving the rotator cuff of the shoulder have received great interest. Novel technologies based on nanomaterials have emerged as possible robust solutions for rotator cuff injury and treatment due to structure/property relationships. The aim of the review submitted is to comprehensively describe and evaluate the development and use of nano-based material technologies for applications to rotator cuff tendon healing and regeneration.

Effects of hydrogen peroxide on biological characteristics and osteoinductivity of decellularized and demineralized bone matrices

Due to the similar collagen composition and closely physiological relationship with soft connective tissues, demineralized bone matrices (DBMs) were used to repair the injured tendon or ligament. However, the osteoinductivity of DBMs would be a huge barrier of these applications. Hydrogen peroxide (H₂ O₂ ) has been proved to reduce the osteoinductivity of DBMs. Nevertheless, the biological properties of H₂ O₂ -treated DBMs have not been evaluated completely, while the potential mechanism of H₂ O₂ compromising osteoinductivity is also unclear. Hence, the purpose of this study was to characterize the biological properties of H₂ O₂ -treated DBMs and search for the proof that H₂ O₂ could compromise osteoinductivity of DBMs. Decellularized and demineralized bone matrices (DCDBMs) were washed by 3% H₂ O₂ for 12 h to fabricate the H₂ O₂ -treated DCDBMs (HPTBMs). Similar biological properties including collagen, biomechanics, and biocompatibility were observed between DCDBMs and HPTBMs. The immunohistochemistry staining of bone morphogenetic protein 2 (BMP-2) was negative in HPTBMs. Furthermore, HPTBMs exhibited significantly reduced osteoinductivity both in vitro and in vivo. Taken together, these findings suggest that the BMP-2 in DCDBMs could be the target of H₂ O₂ . HPTBMs could be expected to be used as a promising scaffold for tissue engineering. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2019.

A Collagen and Silk Scaffold for Improved Healing of the Tendon and Bone Interface in a Rabbit Model

Background

The study aimed to develop a novel orthopedic surgical scaffold made of collagen and silk to repair the tendon and bone interface, and to investigate its influence on tendon and bone healing in a rabbit model.

Material/Methods

Four types of surgical scaffold were prepared, including a random collagen scaffold (RCS), an aligned collagen scaffold (ACS), a random collagen scaffold combined with knitted silk (RCSS), and an aligned collagen scaffold combined with knitted silk (ACSS). Rabbit bone marrow stem cells (BMSCs) were cultured and seeded onto the RCS and ACS scaffold. The animal model included four-month-old female New Zealand White rabbits (N=20) that underwent drilling into the rotator cuff of the left supraspinatus muscle tendon, randomized into the ACSS and RCSS groups.

Results

Rabbit BMSCs adhered to and proliferated on the RCS and ACS in vitro. Transcription levels of the COL I, COL III, and tenascin (TCN) genes were significantly increased in the ACS group compared with the RCS group. Transcription levels of COL I, runt-related transcription factor-2 (RUNX-2) and bone morphogenetic protein-2 (BMP-2) were significantly increased in the RCS group compared with the ACS group. RCSS and ACSS implanted in the rabbit models for eight weeks resulted in more regenerative tissue in the RCSS group compared with the ACSS group, with new cartilage at the tendon and bone interface at 12 weeks.

Conclusions

A collagen and silk scaffold improved healing of the tendon and bone interface in a rabbit model.

Integrating soft and hard tissues via interface tissue engineering

The enthesis, or interface between bone and soft tissues such as ligament and tendon, is prone to injury and often does not heal, even post surgical intervention. Interface tissue engineering represents an integrative strategy for regenerating the native enthesis by functionally connecting soft and hard tissues and thereby improving clinical outcome. This review focuses on integrative and cell-instructive scaffold designs that target the healing of the two most commonly injured soft tissue-bone junctions: tendon-bone interface (e.g., rotator cuff) and ligament-bone interface (e.g., anterior cruciate ligament). The inherent connectivity between soft and hard tissues is instrumental for musculoskeletal motion and is therefore a key design criterion for soft tissue regeneration. To this end, scaffold design for soft tissue regeneration have progressed from single tissue systems to the emerging focus on pre-integrated and functional composite tissue units. Specifically, a multifaceted, bioinspired approach has been pursued wherein scaffolds are tailored to stimulate relevant cell responses using spatially patterned structural and chemical cues, growth factors, and/or mechanical stimulation. Moreover, current efforts to elucidate the essential scaffold design criteria via strategic biomimicry are emphasized as these will reduce complexity in composite tissue regeneration and ease the related burden for clinical translation. These innovative studies underscore the clinical relevance of engineering connective tissue integration and have broader impact in the formation of complex tissues and total joint regeneration. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1069-1077, 2018.

Regenerative Engineering of the Rotator Cuff of the Shoulder

Rotator cuff tears often heal poorly, leading to re-tears after repair. This is in part attributed to the low proliferative ability of the resident cells (tendon fibroblasts and tendon-stem cells) upon injury to the rotator cuff tissue and the low vascularity of the tendon insertion. In addition, surgical outcomes of current techniques used in clinical settings are often suboptimal, leading to the formation of neo-tissue with poor biomechanics and structural characteristics, which results in re-tears. This has prompted interest in a new approach, which we term as "Regenerative Engineering", for regenerating rotator cuff tendons. In the Regenerative Engineering paradigm, roles played by stem cells, scaffolds, growth factors/small molecules, the use of local physical forces, and morphogenesis interplayed with clinical surgery techniques may synchronously act, leading to synergistic effects and resulting in successful tissue regeneration. In this regard, various cell sources such as tendon fibroblasts and adult tissue-derived stem cells have been isolated, characterized, and investigated for regenerating rotator cuff tendons. Likewise, numerous scaffolds with varying architecture, geometry, and mechanical characteristics of biologic and synthetic origin have been developed. Furthermore, these scaffolds have been also fabricated with biochemical cues (growth factors and small molecules), facilitating tissue regeneration. In this Review, various strategies to regenerate rotator cuff tendons using stem cells, advanced materials, and factors in the setting of physical forces under the Regenerative Engineering paradigm are described.

Enhancing tissue integration and angiogenesis of a novel nanocomposite polymer using plasma surface polymerisation, an in vitro and in vivo study

Current surgical reconstruction of facial defects including nose or ear involves harvesting patient's own autologous tissue, causing donor site morbidity and is limited by tissue availability. The use of alternative synthetic materials is also limited due to complications related to poor tissue integration and angiogenesis, which lead to extrusion of implants and infection. We intend to meet this clinical challenge by using a novel nanocomposite called polyhedral oligomeric silsesquioxane poly(carbonate-urea)urethane (POSS-PCU), which has already been successfully taken to the clinical bench-side as a replacement for trachea, tear duct and vascular by-pass graft. In this study, we aimed to enhance tissue integration and angiogenesis of POSS-PCU using an established surface treatment technique, plasma surface polymerisation (PSP), functionalising the surface using NH2 and COOH chemical groups. Physical characterisation of scaffolds was achieved by using a number of techniques, including water contact angle, SEM, AFM and XPS to study the effects of PSM modification on the POSS-PCU nanocomposite in detail, which has not been previously documented. Wettability evaluation confirmed that scaffolds become hydrophilic and AFM analysis confirmed that nano topographical alterations resulted as a consequence of PSP treatment. Chemical functionalisation was confirmed using XPS, which suggested the presence of NH2 and COOH functional groups on the scaffolds. The modified scaffolds were then tested both in vitro and in vivo to investigate the potential of PSP modified POSS-PCU scaffolds on tissue integration and angiogenesis. In vitro analysis confirmed that PSM modification resulted in higher cellular growth, proliferation and ECM production as assessed by biochemical assays and immunofluorescence. Subcutaneous implantation of modified POSS-PCU scaffolds was then carried out over 12-weeks, resulting in enhanced tissue integration and angiogenesis (p < 0.05). This study demonstrates a simple and cost effective surface modification method to overcome the current challenge of implant extrusion and infection caused by poor integration and angiogenesis.

Biomimetic strategies for engineering composite tissues

The formation of multiple tissue types and their integration into composite tissue units presents a frontier challenge in regenerative engineering. Tissue-tissue synchrony is crucial in providing structural support for internal organs and enabling daily activities. This review highlights the state-of-the-art in composite tissue scaffold design, and explores how biomimicry can be strategically applied to avoid over-engineering the scaffold. Given the complexity of biological tissues, determining the most relevant parameters for recapitulating native structure-function relationships through strategic biomimicry will reduce the burden for clinical translation. It is anticipated that these exciting efforts in composite tissue engineering will enable integrative and functional repair of common soft tissue injuries and lay the foundation for total joint or limb regeneration.

Engineering complex orthopaedic tissues via strategic biomimicry

The primary current challenge in regenerative engineering resides in the simultaneous formation of more than one type of tissue, as well as their functional assembly into complex tissues or organ systems. Tissue-tissue synchrony is especially important in the musculoskeletal system, wherein overall organ function is enabled by the seamless integration of bone with soft tissues such as ligament, tendon, or cartilage, as well as the integration of muscle with tendon. Therefore, in lieu of a traditional single-tissue system (e.g., bone, ligament), composite tissue scaffold designs for the regeneration of functional connective tissue units (e.g., bone-ligament-bone) are being actively investigated. Closely related is the effort to re-establish tissue-tissue interfaces, which is essential for joining these tissue building blocks and facilitating host integration. Much of the research at the forefront of the field has centered on bioinspired stratified or gradient scaffold designs which aim to recapitulate the structural and compositional inhomogeneity inherent across distinct tissue regions. As such, given the complexity of these musculoskeletal tissue units, the key question is how to identify the most relevant parameters for recapitulating the native structure-function relationships in the scaffold design. Therefore, the focus of this review, in addition to presenting the state-of-the-art in complex scaffold design, is to explore how strategic biomimicry can be applied in engineering tissue connectivity. The objective of strategic biomimicry is to avoid over-engineering by establishing what needs to be learned from nature and defining the essential matrix characteristics that must be reproduced in scaffold design. Application of this engineering strategy for the regeneration of the most common musculoskeletal tissue units (e.g., bone-ligament-bone, muscle-tendon-bone, cartilage-bone) will be discussed in this review. It is anticipated that these exciting efforts will enable integrative and functional repair of soft tissue injuries, and moreover, lay the foundation for the development of composite tissue systems and ultimately, total limb or joint regeneration.

Kartogenin induces cartilage-like tissue formation in tendon-bone junction

Tendon–bone junctions (TBJs) are frequently injured, especially in athletic settings. Healing of TBJ injuries is slow and is often repaired with scar tissue formation that compromises normal function. This study explored the feasibility of using kartogenin (KGN), a biocompound, to enhance the healing of injured TBJs. We first determined the effects of KGN on the proliferation and chondrogenic differentiation of rabbit bone marrow stromal cells (BMSCs) and patellar tendon stem/progenitor cells (PTSCs) in vitro. KGN enhanced cell proliferation in both cell types in a concentration-dependent manner and induced chondrogenic differentiation of stem cells, as demonstrated by high expression levels of chondrogenic markers aggrecan, collagen II and Sox-9. Besides, KGN induced the formation of cartilage-like tissues in cell cultures, as observed through the staining of abundant proteoglycans, collagen II and osteocalcin. When injected into intact rat patellar tendons in vivo, KGN induced cartilage-like tissue formation in the injected area. Similarly, when KGN was injected into experimentally injured rat Achilles TBJs, wound healing in the TBJs was enhanced, as evidenced by the formation of extensive cartilage-like tissues. These results suggest that KGN may be used as an effective cell-free clinical therapy to enhance the healing of injured TBJs.