The pretreatment of corn stover with Gloeophyllum trabeum KU-41 for enzymatic hydrolysis

Insights into lignocellulosic waste fractionation for lignin nanospheres fabrication using acidic/alkaline deep eutectic solvents

Facile fractionation of lignocellulosic waste into useable forms is essential to achieve a multi-product treatment process especially when the resulting lignin streams are expected for high-value materials valorization. Despite acidic/alkaline deep eutectic solvents (DESs) are promising solvents for lignocellulosic waste fractionation, there is little information about their differences in the fractionation and lignin extraction profiles. In this work, four DESs that were cataloged to acidic types (formic acid-choline chloride, lactic acid-choline chloride) and alkaline types (monoethanolamine-choline chloride, glycerol-K₂CO₃) were investigated to compare their abilities of bamboo waste fractionation. Physicochemical properties of these resulting cellulose, lignin and derived lignin nanospheres (LNPs) were also assessed. Results showed that DESs could selectively extract lignin via cleaving lignin-carbohydrate linkages and lignin ether bonds. Acidic DESs pretreatments were more effective in biomass delignification (~95.0 %), while alkaline DESs showed better polysaccharide retention. Glycerol-K₂CO₃ LNPs exhibited much smaller sphere size (50-100 nm) while acidic DESs LNPs showed higher thermal stability due to higher extent of lignin condensation. In addition, MEA-ChCl could introduce amine groups onto lignin hydroxyl. This work provided insightful information for tailoring technique routes to selective lignocellulosic waste fractionation, while facilitating the downstream applications of the obtained cellulose/lignin.

Mild fractionation of poplar into reactive lignin via lignin-first strategy and its enhancement on cellulose saccharification

The lignin-first biorefinery approach was desirable to produce lignin-derived products by protecting the linkages of lignin and reducing condensation reaction. However, so far lignin-first strategy studies were mainly carried out under harsh conditions, causing serious destruction of lignin structure and reduction of chemically labile linkages, which was not conducive to enhance value of lignin adequately. In this work, mild fractionation of poplar via lignin-first strategy using dioxane/methanol at 80 °C was developed for purposely extracting reactive lignin with a relatively higher yield (>50%), purity (>99%), β-O-4' linkages and p-hydroxybenzoate group as compared with controlled sample. In addition, glucose yield of cellulose-rich residue under lignin-first strategy was significantly enhanced to 98.57% due to the superior cellulase adsorption abilities, which was obviously higher than the controlled group (53.88%). Overall, this mild lignin-first strategy was promising to fractionate lignocellulose into reactive lignin and fermentable glucose, thereby achieving full utilization of lignocellulose biomass.

Increased enzyme activities and fungal degraders by Gloeophyllum trabeum inoculation improve lignocellulose degradation efficiency during manure-straw composting

The present study investigated the effect of brown-rot fungus Gloeophyllum trabeum inoculation on lignocellulose degradation, enzyme activities and fungal community during co-composting of swine manure and wheat straw. G. trabeum inoculation shortened the maturation period of composting from 39 to 30 days. Composting piles inoculated with G. trabeum showed a higher degree of maturity as indicated by 31.6% lower C/N ratio and 29.4% higher GI. The decomposition rate of cellulose, hemicellulose and lignin was increased by 181.1%, 49.4% and 109.4%, respectively, due to higher activities of filter paper enzyme, xylanase, manganese peroxidase and laccase. Redundancy analysis showed that inoculating G. trabeum influenced the succession of fungal communities by changing the main physicochemical parameters, resulting in the increased relative abundance of Aspergillus, Mycothermus and Melanocarpus. Pearson correlation analysis indicated that more dominant fungal genera were involved in the production of lignocellulose-degrading enzymes after G. trabeum inoculation.

Digestibility of Bacillus firmus K-1 pretreated rice straw by different commercial cellulase cocktails

Removal of xylan in plant biomass is believed to increase cellulose hydrolysis by uncovering cellulose surfaces for cellulase adsorption and, in turn, catalysis reaction. Herein, we describe an eco-friendly method by culturing a xylanolytic Bacillus firmus K-1 on rice straw to remove xylan. The bacterium was grown on 2.5% (w/v) rice straw with different biomass particle sizes for two days at 37 °C. We found that the particle sizes ranged from <1 to 5 mm gave a similar xylan removal degree (about 21%). Besides, the porosity and disintegration of the rice straw fibers were observed at the molecular level. The digestibility of pretreated rice straw was tested with different commercial cellulase cocktails. We found that the pretreated rice straw was more susceptible to enzymatic hydrolysis, giving 30-70% glucan conversion than the untreated one. The degree of cellulose hydrolysis depended strongly on the kinds of enzyme and their formulations. HighlightCulturing B. firmus K-1 on rice straw yielded about 21% removal of xylan.Particle sizes (of 1-5 mm) had negligible effects on xylan removal efficiency.The degree of glucan conversion in pretreated biomass relied on enzyme formulation.

High potential of Rhizopus treated rice bran waste for the nutrient-free anaerobic fermentative biohydrogen production

In this study, Rhizopus oligosporus MTCC 556 (Rhizopus) treated rice bran was utilized for the anaerobic bacterial fermentative hydrogen production. The Enterobacter aerogenes MTCC 2822 with nutrients addition fermented the treated rice bran to give hydrogen yield of 5.4 mmol H₂/g of biomass. A closely similar hydrogen yield of 4.6 mmol H₂/g of biomass was obtained from the treated rice bran under the condition without nutrients addition, suggesting the potential of the fungus treatment to produce hydrogen from nutrient-free fermentation. The pretreated rice bran showed efficient hydrogen production upon anaerobic fermentation without nutrients addition. The Rhizopus pretreated biomass can provide required nutrients for the enhancement of hydrogen yield by anaerobic fermentation. The Rhizopus pretreatment of rice bran enhanced the hydrogen production under nutrient-free conditions which reduced the overall production cost. The findings provide a promising solution to efficiently utilize the rice bran waste for low cost hydrogen production.

Biotransformation of lignocellulosic biomass into industrially relevant products with the aid of fungi-derived lignocellulolytic enzymes

Lignocellulosic material has drawn significant attention among the scientific community due to its year-round availability as a renewable resource for industrial consumption. Being an economic substrate alternative, various industries are reevaluating processes to incorporate derived compounds from these materials. Varieties of fungi and bacteria have the ability to depolymerize lignocellulosic biomass by synthesizing degrading enzymes. Owing to catalytic activity stability and high yields of conversion, lignocellulolytic enzymes derived from fungi currently have a high spectrum of industrial applications. Moreover, these materials are cost effective, eco-friendly and nontoxic while having a low energy input. Techno-economic analysis for current enzyme production technologies indicates that synthetic production is not commercially viable. Instead, the economic projection of the use of naturally-produced ligninolytic enzymes is promising. This approach may improve the economic feasibility of the process by lowering substrate expenses and increasing lignocellulosic by-product's added value. The present review will discuss the classification and enzymatic degradation pathways of lignocellulolytic biomass as well as the potential and current industrial applications of the involved fungal enzymes.

Symposium review: Technologies for improving fiber utilization

The forage lignocellulosic complex is one of the greatest limitations to utilization of the nutrients and energy in fiber. Consequently, several technologies have been developed to increase forage fiber utilization by dairy cows. Physical or mechanical processing techniques reduce forage particle size and gut fill and thereby increase intake. Such techniques increase the surface area for microbial colonization and may increase fiber utilization. Genetic technologies such as brown midrib mutants (BMR) with less lignin have been among the most repeatable and practical strategies to increase fiber utilization. Newer BMR corn hybrids are better yielding than the early hybrids and recent brachytic dwarf BMR sorghum hybrids avoid lodging problems of early hybrids. Several alkalis have been effective at increasing fiber digestibility. Among these, ammoniation has the added benefit of increasing the nitrogen concentration of the forage. However, few of these have been widely adopted due to the cost and the caustic nature of the chemicals. Urea treatment is more benign but requires sufficient urease and moisture for efficacy. Ammonia-fiber expansion technology uses high temperature, moisture, and pressure to degrade lignocellulose to a greater extent than ammoniation alone, but it occurs in reactors and is therefore not currently usable on farms. Biological technologies for increasing fiber utilization such as application of exogenous fibrolytic enzymes, live yeasts, and yeast culture have had equivocal effects on forage fiber digestion in individual studies, but recent meta-analyses indicate that their overall effects are positive. Nonhydrolytic expansin-like proteins act in synergy with fibrolytic enzymes to increase fiber digestion beyond that achieved by the enzyme alone due to their ability to expand cellulose microfibrils allowing greater enzyme penetration of the cell wall matrix. White-rot fungi are perhaps the biological agents with the greatest potential for lignocellulose deconstruction, but they require aerobic conditions and several strains degrade easily digestible carbohydrates. Less ruminant nutrition research has been conducted on brown rot fungi that deconstruct lignocellulose by generating highly destructive hydroxyl radicals via the Fenton reaction. More research is needed to increase the repeatability, efficacy, cost effectiveness, and on-farm applicability of technologies for increasing fiber utilization.

Microbial pretreatment of lignocellulosic biomass for enhanced biomethanation and waste management

Biogas obtained from organic remains entails a developed technology and an appreciable methane yield, but its use may not be sustainable. The potential methane yield of various lignocellulose biomass and the operational conditions employed are inherently reviewed. Although of lower methane yields compared to conventional substrates, agricultural biomass is a cheap option. The major challenges encountered during its biogasification are its recalcitrance nature primarily due to the presence of crystalline cellulose and lignin. This necessitates an essential pretreatment step through physical, chemical or biological interventions for enhanced biomethanation potential. Various pretreatment-physical, chemical, and biological-strategies have been developed to overcome the inherent recalcitrance of lignocellulose to anaerobic degradation. Biological pretreatment approach, however, outcompete other pretreatments due to their application in milder conditions, little corrosiveness, and lower byproduct formation. Such pretreatment importantly aids in selectively reducing the lignin content and crystalline nature of the lignocellulosic biomass, which would evidently enhance the hydrolysis and production of monomers for their further anaerobic digestion (AD) for methanation. A variety of applied biological pretreatment strategies comprises microaerobic treatments, ensiling or composting, separation of digestion stages, and pretreatments using various lignocellulolytic fungi alongside. The net energy output through such approaches is substantially more and relatively inexpensive compared to other established chemical and mechanical approaches. The present review highlights the use of biological agents including bacterial, fungal and/or their enzymes which trigger biodegradation of wastes and utilization of lignocellulose for biofuel production. Additionally, the different physical, chemical, and biological pretreatment strategies for biogas yield enhancement are presented.

Pretreatment with concurrent UV photocatalysis and alkaline H2O2 enhanced the enzymatic hydrolysis of sisal waste

This work studied a concurrent UV photocatalysis and alkaline H₂O₂ pretreatment (UHP) to enhance the subsequent enzymatic hydrolysis of sisal waste in comparison with alkaline H₂O₂ pretreatment (AHP). An optimal condition was identified for UHP at H₂O₂ charge 0.1 g/g dried sisal waste, pH 10.0, and UV radiation for 6 h. Under this condition, UHP led to a delignification rate of 76.6%, a conversion to reducing sugar at 71.2%, and a conversion to glucose at 91.6%, respectively. XRD, FT-IR and SEM analysis showed an increase in crystalline degree and significant changes in the structure of sisal during UHP. The current study implicates that UHP is more efficient than AHP in pretreating sisal waste, with reduced H₂O₂ charge, shortened pretreatment time, and enhanced enzymatic digestibility.

Enhanced biohydrogen production from nutrient-free anaerobic fermentation medium with edible fungal pretreated rice straw

An edible fungal pretreatment of rice straw was proposed for enhanced hydrogen production while reducing the chemical cost for traditional biological hydrogen production from lignocellulose. In this research, rice straw was pretreated by edible fungus Gymnopus contrarius J2 at room temperature under static conditions for 15 d at first. The highest hydrogen yield of 5.71 mmol g-1-pretreated rice straw was obtained, 74% higher than the counterpart without pretreatment. Chemical composition analysis demonstrated that lignin removal was up to 22.4% with a little cellulose and hemicellulose loss of 13.3% and 17.1%, respectively, which is in favor of hydrogen production. Additionally, microscopic structure observation combined with FT-IR and XRD analysis illustrated the structural disruption of pretreated rice straw, and the crystalline index of rice straw can be decreased by 46.2% after pretreatment, which might account for the hydrogen production enhancement. The results also indicated that the hydrogen yield from pretreated rice straw was not affected without the addition of yeast extract and vitamins to the culture medium, which is substantial evidence that edible fungal pretreated rice straw could provide prerequisite nutrients for hydrogen-producing bacteria. Overall, edible fungal pretreatment has great potential under the mild conditions for high hydrogen yields and thus leads to a new direction to realize a highly efficient and economically competitive biological hydrogen production process from lignocellulosic biomass.

Use of bacteria for improving the lignocellulose biorefinery process: importance of pre-erosion

BACKGROUND

Biological pretreatment is an important alternative strategy for biorefining lignocellulose and has attracted increasing attention in recent years. However, current designs for this pretreatment mainly focus on using various white rot fungi, overlooking the bacteria. To the best of our knowledge, for the first time, we evaluated the potential contribution of bacteria to lignocellulose pretreatment, with and without a physicochemical process, based on the bacterial strain Pandoraea sp. B-6 (hereafter B-6) that was isolated from erosive bamboo slips. Moreover, the mechanism of the improvement of reducing sugar yield by bacteria was elucidated via analyses of the physicochemical changes of corn stover (CS) before and after pretreatment.

RESULTS

The digestibility of CS pretreated with B-6 was equivalent to that of untreated CS. The recalcitrant CS surface provided fewer mediators for contact with the extracellular enzymes of B-6. A pre-erosion strategy using a tetrahydrofuran-water co-solvent system was shown to destroy the recalcitrant CS surface. The optimal condition for pre-erosion showed a 6.5-fold increase in enzymatic digestibility compared with untreated CS. The pre-erosion of CS can expose more phenolic compounds that were chelated to oxidized Mn³⁺ and also provided mediators for combination with laccase, which was attributable to B-6 pretreatment. B-6 pretreatment following pre-erosion exhibited a sugar yield that was 91.2 mg/g greater than that of pre-erosion alone and 7.5-fold higher than that of untreated CS. This pre-erosion application was able to destroy the recalcitrant CS surface, thus leading to a rough and porous architecture that better facilitated the diffusion and transport of lignin derivatives. This enhanced the ability of laccase and manganese peroxidase secreted by B-6 to improve the efficiency of this biological pretreatment.

CONCLUSION

Bacteria were not found useful alone as a biological pretreatment, but they significantly improved enzymatic digestion after lignocellulose breakdown via other physicochemical methods. Nonetheless, phenyl or phenoxy radicals were used by laccase and manganese peroxidase in B-6 for lignin attack or lignin depolymerization. These particular mediators released from the recalcitrance network of lignocellulose openings are important for the efficacy of this bacterial pretreatment. Our findings thus offer a novel perspective on the effective design of biological pretreatment methods for lignocellulose.

A novel and efficient fungal delignification strategy based on versatile peroxidase for lignocellulose bioconversion

BACKGROUND

The selective lignin-degrading white-rot fungi are regarded to be the best lignin degraders and have been widely used for reducing the saccharification recalcitrance of lignocellulose. However, the biological delignification and conversion of lignocellulose in biorefinery is still limited. It is necessary to develop novel and more efficient bio-delignification systems.

RESULTS

Physisporinus vitreus relies on a new versatile peroxidase (VP)-based delignification strategy to remove enzymatic recalcitrance of corn stover efficiently, so that saccharification of corn stover was significantly enhanced to 349.1 mg/g biomass (yield of glucose) and 91.5% (hydrolysis yield of cellulose) at 28 days, as high as levels reached by thermochemical treatment. Analysis of the lignin structure using pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) showed that the total abundance of lignin-derived compounds decreased by 54.0% and revealed a notable demethylation during lignin degradation by P. vitreus. Monomeric and dimeric lignin model compounds were used to confirm the ligninolytic capabilities of extracellular ligninases secreted by P. vitreus. The laccase (Lac) from P. vitreus could not oxidize nonphenolic lignin compounds and polymerized β-O-4 and 5-5' dimers to precipitate which had a negative effect on the enzymatic hydrolysis of corn stover in vitro. However, the VP from P. vitreus could oxidize both phenolic and nonphenolic lignin model compounds as well as break the β-O-4 and 5-5' dimers into monomeric compounds, which were measured by high-performance liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS). Moreover, we showed that addition of purified VP in vitro improved the enzymatic hydrolysis of corn stover by 14.1%.

CONCLUSIONS

From the highly efficient system of enzymatic recalcitrance removal by new white-rot fungus, we identified a new delignification strategy based on VP which could oxidize both phenolic and nonphenolic lignin units and break different linkages in lignin. In addition, this is the first evidence that VP could break 5-5' linkage efficiently in vitro. Moreover, VP improved the enzymatic hydrolysis of corn stover in vitro. The remarkable lignin-degradative potential makes VP attractive for biotechnological applications.

Role of carbon source in the shift from oxidative to hydrolytic wood decomposition by Postia placenta

Brown rot fungi initiate wood decay using oxidative pretreatments to improve access for cellulolytic enzymes. These pretreatments are incompatible with enzymes, and we recently showed that Postia placenta overcomes this issue by delaying glycoside hydrolase (GH) gene upregulation briefly (<48h) until expression of oxidoreductases (ORs) is repressed. This implies an inducible cellulase system rather than a constitutive system, as often reported, and it remains unclear what cues this transition. To address this, we grew P. placenta along wood wafers and spatially mapped expression (via quantitative PCR) of twelve ORs and GHs targeted using functional genomics analyses. By layering expression patterns over solubilized sugar data (via HPLC) from wood, we observed solubilization of wood glucose, cellobiose, mannose, and xylose coincident with the OR-GH transition. We then tested effects of these soluble sugars, plus polymeric carbon sources (spruce powder, cellulose), on P. placenta gene expression in liquid cultures. Expression of ORs was strictly (aox1, cro5) or progressively repressed over time (qrd1, lcc1) by all soluble sugars, including cellobiose, but not by polymeric sources. Simple sugars repressed hemicellulase gene expression over time, but these sugars did not repress cellulases. Cellulase genes were upregulated, however, along with hemicellulases in the presence of soluble cellobiose and in the presence of polymeric carbon sources, relative to starvation (carbon-free). This verifies an inducible cellulase system in P. placenta that lacks carbon catabolite repression (CCR), and it suggests that brown rot fungi use soluble sugars, particularly cellobiose, to cue a critical oxidative-hydrolytic transition.

Comparative techno-economic analysis of steam explosion, dilute sulfuric acid, ammonia fiber explosion and biological pretreatments of corn stover

Pretreatment is required to destroy recalcitrant structure of lignocelluloses and then transform into fermentable sugars. This study assessed techno-economics of steam explosion, dilute sulfuric acid, ammonia fiber explosion and biological pretreatments, and identified bottlenecks and operational targets for process improvement. Techno-economic models of these pretreatment processes for a cellulosic biorefinery of 113.5 million liters butanol per year excluding fermentation and wastewater treatment sections were developed using a modelling software-SuperPro Designer. Experimental data of the selected pretreatment processes based on corn stover were gathered from recent publications, and used for this analysis. Estimated sugar production costs ($/kg) via steam explosion, dilute sulfuric acid, ammonia fiber explosion and biological methods were 0.43, 0.42, 0.65 and 1.41, respectively. The results suggest steam explosion and sulfuric acid pretreatment methods might be good alternatives at present state of technology and other pretreatment methods require research and development efforts to be competitive with these pretreatment methods.

Insect biorefinery: a green approach for conversion of crop residues into biodiesel and protein

BACKGROUND

As a major lignocellulosic biomass, which represented more than half of the world's agricultural phytomass, crop residues have been considered as feedstock for biofuel production. However, large-scale application of this conventional biofuel process has been facing obstacles from cost efficiency, pretreatment procedure, and secondary pollution. To meet the growing demands for food, feed, and energy as the global population continues to grow, certain kinds of insects, many of which are voracious feeders of organic wastes that may help address environmental, economic, and health issues, have been highlighted as a source of protein and fat.

RESULTS

The biorefinery studied includes initial corn stover degradation by yellow mealworm (Tenebrio molitor L.), followed by a second stage that employs black soldier fly (Hermetia illucens L.), to utilize the residues produced during the first stage. These two insect-based biorefinery yielded 8.50 g of insect biomass with a waste dry mass reduction rate of 51.32%, which resulted in 1.95 g crude grease from larval biomass that produced 1.76 g biodiesel, 6.55 g protein, and 111.59 g biofertilizer. The conversion rate of free fatty acids of crude grease into biodiesel reached 90%. The components of cellulose, hemicellulose, and lignin contained in corn stover hydrolyzed harmoniously, resulting in declines of 45.69, 51.85, and 58.35%, respectively. Moreover, fluctuations in lipid, protein, and reducing sugar were also analyzed.

CONCLUSION

The investigation findings demonstrated that successive co-conversion of corn stover by insects possessing different feeding habits could be an attractive option for efficient utilization of lignocellulosic resources, and represents a potentially valuable solution to crop residues management, rise of global liquid energy, and animal feed demand.

Mesophilic-hydrothermal-thermophilic (M-H-T) digestion of green corn straw

Mesophilic-hydrothermal (80-160 °C, 30 min)-thermophilic (M-H-T) digestion and control tests of mesophilic (M), thermophilic (T), hydrothermal-mesophilic (H-M), and mesophilic-thermophilic digestion (M-T) of green corn straw were conducted for a 20-day fermentation period. The results indicate that M-H-T is an efficient method to improve methane production. A maximum methane yield of 371.74 mL/g volatile solid was obtained by the M (3 days)-H (140 °C)-T (17 days) process, which was 20.44%, 16.55%, 31.44%, and 14.31% higher than the yields of the M, T, 140-M, and M-T processes. The enhanced methane production was attributed to (1) the improved hemicellulose degradation and lignin disorganization; (2) prevention of the degradation of soluble sugar, easily hydrolyzed hemicellulose and cellulose into furfural and methylfurfural; and (3) lack of formation of Maillard reaction products during initial hydrothermal treatment.

Biological pretreatment of lignocellulosic biomass--An overview

Pretreatment is an important step involved in the production of bioethanol from lignocelluosic biomass. Though several pretreatment regimes are available, biological pretreatment seems to be promising being an eco-friendly process and there is no inhibitor generation during the process. In the current scenario there are few limitations in using this strategy for pilot scale process. The first and foremost one is the long incubation time for effective delignification. This can be minimized to an extent by using suitable microbial consortium. There is an urgent need for research and development activities and fine tuning of the process for the development of an economically viable process. This review presents an overview of various aspects of biological pretreatment, enzymes involved in the process, parameters affecting biological pretreatment as well as future perspectives.

Enhanced biogas production from wheat straw with the application of synergistic microbial consortium pretreatment

Pretreatment of lignocellulosic biomass by using synergistic microbial consortium is an efficient way to promote biomass utilization efficiency.

Molecular breeding of lignin-degrading brown-rot fungus Gloeophyllum trabeum by homologous expression of laccase gene

The basidiomycete Gloeophyllum trabeum KU-41 can degrade Japanese cedar wood efficiently. To construct a strain better suited for biofuel production from Japanese cedar wood, we developed a gene transformation system for G. trabeum KU-41 using the hygromycin phosphotransferase-encoding gene (hpt) as a marker. The endogenous laccase candidate gene (Gtlcc3) was fused with the promoter of the G. trabeum glyceraldehyde-3-phosphate dehydrogenase-encoding gene and co-transformed with the hpt-bearing pAH marker plasmid. We obtained 44 co-transformants, and identified co-transformant L#61, which showed the highest laccase activity among all the transformants. Moreover, strain L#61 was able to degrade lignin in Japanese cedar wood-containing medium, in contrast to wild-type G. trabeum KU-41 and to a typical white-rot fungus Phanerochaete chrysosporium. By using strain L#61, direct ethanol production from Japanese cedar wood was improved compared to wild type. To our knowledge, this study is the first report of the molecular breeding of lignin-degrading brown-rot fungus and direct ethanol production from softwoods by co-transformation with laccase overproduction constructs.

Comparing lignocellulose physiochemistry after decomposition by brown rot fungi with distinct evolutionary origins

Among wood-degrading fungi, lineages holding taxa that selectively metabolize carbohydrates without significant lignin removal (brown rot) are polyphyletic, having evolved multiple times from lignin-removing white rot fungi. Given the qualitative nature of the 'brown rot' classifier, we aimed to quantify and compare the temporal sequence of carbohydrate removal among brown rot clades. Lignocellulose deconstruction was compared among fungi using distinct plant substrates (angiosperm, conifer, grass). Specifically, aspen, pine and corn stalk were harvested over a 16-week time series from microcosms containing Gloeophyllum trabeum, Fomitopsis pinicola, Ossicaulis lignatilis, Fistulina hepatica, Serpula lacrymans, Wolfiporia cocos or Dacryopinax sp. After quantifying plant mass loss, a thorough compositional analysis was complemented by a saccharification test to determine wood cell wall accessibility. Mass loss and accessibility varied depending on fungal decomposer and substrate, and trajectories of loss for hemicellulosic components and cellulose differed among plant tissue types. At any given stage of decomposition, however, lignocellulose accessibility and the fraction remaining of carbohydrates and lignin within a plant tissue type were generally the same, regardless of fungal isolate. This suggests that the sequence of plant component removal at this typical scale of characterization is shared among these brown rot lineages, despite their diverse genomes and secretomes.

A new lipid-rich microalga Scenedesmus sp. strain R-16 isolated using Nile red staining: effects of carbon and nitrogen sources and initial pH on the biomass and lipid production

BACKGROUND

Biodiesel production from oleaginous microalgae shows great potential as a promising alternative to conventional fossil fuels. Currently, most research focus on algal biomass production with autotrophic cultivation, but this cultivation strategy induces low biomass concentration and it is difficult to be used in large-scale algal biomass production. By contrast, heterotrophic algae allows higher growth rate and can accumulate higher lipid. However, the fast-growing and lipid-rich microalgae that can be cultivated in heterotrophic system for the industrial application of biodiesel production are still few. Traditional solvent extraction and gravimetric determination to detect the microalgal total lipid content is time-consuming and laborious, which has become a major limiting factor for selecting large number of algae specimens. Thus, it is critical to develop a rapid and efficient procedure for the screening of lipid-rich microalgae.

RESULTS

A novel green microalga Scenedesmus sp. strain R-16 with high total lipid content was selected using the Nile red staining from eighty-eight isolates. Various carbon sources (fructose, glucose and acetate) and nitrogen sources (nitrate, urea, peptone and yeast extract) can be utilized for microalgal growth and lipid production, and the optimal carbon and nitrogen sources were glucose (10 g L-1) and nitrate (0.6 g L-1), respectively. Compared to autotrophic situation, the strain R-16 can grow well heterotrophically without light and the accumulated total lipid content and biomass reached 43.4% and 3.46 g L-1, respectively. In addition, nitrogen deficiency led to an accumulation of lipid and the total lipid content was as high as 52.6%, and it was worth noting that strain R-16 exhibited strong tolerance to high glucose (up to 100 g L-1) and a wide range of pH (4.0-11.0).

CONCLUSIONS

The newly developed ultrasonic-assisted Nile red method proved to be an efficient isolation procedure and was successfully used in the selection of oleaginous microalgae. The isolated novel green microalgal strain R-16 was rich in lipid and can live in varied and contrasting conditions. The algae appeared to have great potential for application in microalgae-based biodiesel production.

Using a grass substrate to compare decay among two clades of brown rot fungi

Interest in the mechanisms of wood-degrading fungi has grown in tandem with lignocellulose bioconversion efforts, yet many potential biomass feedstocks are non-woody. Using corn stover (Zea mays) as a substrate, we tracked degradative capacities among brown rot fungi from the Antrodia clade, including Postia placenta, the first brown rot fungus to have its genome sequenced. Decay dynamics were compared against Gloeophyllum trabeum from the Gloeophyllum clade. Weight loss induced by P. placenta (6.2 %) and five other Antrodia clade isolates (average 7.4 %) on corn stalk after 12 weeks demonstrated inefficiency among these fungi, relative to decay induced by G. trabeum (44.4 %). Using aspen (Populus sp.) as a woody substrate resulted in, on average, a fourfold increase in weight loss induced by Antrodia clade fungi, while G. trabeum results matched those on stover. The sequence and trajectories of chemical constituent losses differed as a function of substrate but not fungal clade. Instead, chemical data suggest that characters unique to stover limit decay by the Antrodia clade, rather than disparities in growth rate or extractives toxicity. High p-coumaryl lignin content, lacking the methoxy groups characteristically cleaved during brown rot, is among potential rate-distinguishing characters in grasses. This ineptitude among Antrodia clade fungi on grasses was supported by meta-analysis of other unrelated studies using grass substrates. Concerning application, results expose a problem if adopting the strategy of the model decay fungus P. placenta to treat corn stover, a widely available plant feedstock. Overall, the results insinuate phylogenetically distinct modes of brown rot and demonstrate the benefit of using non-woody substrates to probe wood degradation mechanisms.