Development and characterization of chitosan-polycarbophil interpolyelectrolyte complex-based 5-fluorouracil formulations for buccal, vaginal and rectal application

Polyelectrolyte-Complex-Based Hydrogel Inserts for Vaginal Delivery of Posaconazole and Probiotics

Worldwide, 40 to 50% of women suffer from reproductive tract infections. Most of these infections are mixed infections, are recurrent and difficult to treat with antimicrobials or antifungals alone. For symptomatic relief of infections, oral antimicrobial therapy must be combined with topical therapy. The purpose of this work is to optimize and develop a polyelectrolyte complex (PEC) of chitosan/anion for the formulation of posaconazole- and probiotic-loaded vaginal hydrogel inserts with prolonged release and significant mucoadhesion. PECs were prepared using chitosan as cationic and carrageenan, pectin and polycarbophil as anionic polymers via a lyophilization technique. PEC formation was confirmed by scanning electron microscopy, Fourier transform infrared spectroscopy and differential scanning calorimetry, by observing changes in its surface, physical and thermal properties. The probiotic, Lactobacillus casei, was added to the PEC during the lyophilization process and the effect on the probiotic viability was studied. The PECs were further compressed along with posaconazole to form hydrogel inserts and optimized using a 32 full-factorial design. The hydrogel inserts were assessed for swelling behavior, drug release, in vitro mucoadhesion and in vitro antifungal activity. The chitosan-pectin hydrogel insert demonstrated excellent mucoadhesion (1.25 N), sustained drug release (88.2 ± 2.4% in 8 h) and a swelling index of 154.7%. The efficacy of hydrogel inserts was evaluated using in vitro study with a co-culture of Lactobacillus casei and Candida albicans. This study revealed an increase in Lactobacilli casei count and a significant drop in the viable count of Candida albicans (4-log reduction in 24 h), indicating the effectiveness of hydrogel inserts in alleviating the fungal infection. Overall, our study demonstrated the potential of the hydrogel insert for preventing vaginal infection and restoring normal vaginal microbiota.

Sustainable Superheated Water Hydrolysis of Black Soldier Fly Exuviae for Chitin Extraction and Use of the Obtained Chitosan in the Textile Field

Interest in insects as waste biomass bioconverters and their use as valuable resources for fat, proteins, and chitin has increased considerably in the last few years. In this study, proteins were extracted from defatted black soldier fly (BSF) (Hermetia illucens) exuviae by green hydrolysis using superheated water at 150 °C for 20 h, and the remaining chitin was deacetylated into chitosan and used as a finishing agent for polyester fabrics. A total amount of 7% fat, 40% proteins, and 20% chitin was obtained from BSF exuviae. Different hydrolysis times ranging from 1 to 20 h were tried until the complete purification of chitin. The purity of chitin and the obtained chitosan after deacetylation was assessed by Fourier transform infrared spectroscopy and thermal analysis. A preliminary study was successfully carried out to use the obtained chitosan as a finishing agent for polyester pretreated fabrics using citric acid as a grafting agent. The presence of chitosan on the fabric was verified by scanning electron microscopy and by dyeing of the pretreated polyester fabric using a reactive dye with sulfonated groups that are able to be absorbed by electrostatic attraction because of the created cationic nature of the fiber surface treated by chitosan.

Production and physicochemical characterization of chitosan for the harvesting of wild microalgae consortia

•

The chitosan obtained shows physicochemical properties similar to commercials.

•

The low molecular chitosan for harvesting microalgae shows better results than aluminum sulfate.

•

The use chitosan for harvesting microalgae reduces the process costs.

The use of chitosan to harvest microalgae is a strategic step that seeks to reach an economically competitive price to recover lipids, proteins, and pigments. The aim of the present work was to design low-molecular-weight chitosan from shrimp shells and its physicochemical characterization, to be used for the harvesting of wild microalgae consortia. The chitosan was obtained by chemical deacetylation of shrimp shells, and physicochemical characterization was made using the instrumental methods DSC, TGA, X-ray, FTIR, and SEM. The harvesting of wild microalgae consortia was performed by the jar test method. The obtained chitosan had a low molecular weight (169 KDa), a deacetylation degree of 83 %, a decomposition temperature (T_D) of 280 °C, and a crystallinity of 38.2 %. The microalgae genera found in the consortium were Scenedesmus sp., Chlorella sp., Schroderia sp., and Chlamydomonas sp. The microalgae removal efficiency of the chitosan was 99.2 % with 20 mg L⁻¹.

Impact of cyclodextrin derivatives on systemic release of duloxetine HCl via buccal route

Aim: The aim of this work was to develop buccoadhesive tablets for the systemic delivery of duloxetine HCl (DXT) using more soluble derivatives of β-cyclodextrin, i.e. hydroxypropyl-β-cyclodextrin (HPβCD) and sulfobutylether-β-cyclodextrin (SBEβCD) and to investigate enhanced cellular uptake of inclusion complexed drug.Materials and methods: Freeze dried and spray dried complexes of both cyclodextrin derivatives with DXT (1:1 molar) were prepared and characterized with DSC, FTIR, and PXRD techniques. C971 and PC, on the basis of swelling behavior, erosion and in vitro residence time, were selected for further study at different levels (-1, 0, +1) to optimize the formulation in terms of enhanced drug release and ex vivo permeation.Results: SBEβCD based complexes show more aqueous solubility of DXT (0.782 and 0.958 mM) and more complexation efficiency compared to HPβCD at 25 °C and 37 °C, respectively. Apparent stability constant was reported to be higher (1109.94 and 1693.25 M^-1) for DXT-SBEβCD at 25 °C and 37 °C, respectively, than the corresponding values for DXT-HPβCD systems. Enhanced cellular uptake using fibroblast cells was revealed for complexed drug compared to free drug .Conclusion: Both cyclodextrin derivatives are able to enhance drug release and permeation in vitro and ex vivo.

Amphiphilic hyperbranched polyester coated rod mesoporous silica nanoparticles for pH-responsive doxorubicin delivery

Rod-like mesoporous silica nanoparticles with pH-responsive amphiphilic hyperbranched polyester shells were prepared for doxorubicin (DOX) delivery. First, rod-shaped mesoporous silica nanoparticles (MSNs) were obtained, then hydrophobic hyperbranched polyester Boltorn H40 (H40) was grafted on their surface. The H40 coated MSNs were next treated with amine-functionalized polyethylene glycol (PEG) to achieve the hydrophilic and pH-responsive material denoted as PEG-H40-MSNs. The experimental results showed that PEG-H40-MSNs were successfully synthesized. BET analysis showed that rod MSNs exhibits a type IV standard isotherm. TEM revealed that the thin gray polymer layer was formed around the SBA-15 particle with a diameter of around 150 nm. DOX was effectively loaded, which can be released according to the ambient pH inside the cell as follow: at pH 7.4, only 9.7% of the DOX was released after 48 h; as the pH decreased to 5.5, the cumulative release reached to 49% at the same time. PEG-H40-MSNs showed less than 1.6% of hemolytic activity and a slight effect on the liver and kidney of treated mice were observed at a high disposal dosage implying negligible toxicities were caused by PEG-H40-MSNs in both in vitro hemolysis analysis and in vivo biochemical in mice. However, the in vitro cytotoxicity evaluation of the DOX-PEG-H40-MSNs showed that the cell cytotoxicity of both pure DOX and DOX-loaded PEG-H40-MSNs generally enhanced by increasing the concentration of DOX. Graphical abstract Schematic of cellular uptake and DOX release of PEG-H40-MSNs nanoparticle.

Optimized Chitosan/Anion Polyelectrolyte Complex Based Inserts for Vaginal Delivery of Fluconazole: In Vitro/In Vivo Evaluation

(1) Background: Fluconazole, used orally for vaginal candidiasis, has reported gastrointestinal side effects. Therefore, researchers directed towards the drug vaginal delivery. However, vaginal delivery is limited by poor retention and leakage. Thus, this work aimed at exploring chitosan/anion polyelectrolyte complex (PEC) for the formulation of fluconazole vaginal inserts with controlled release and appreciable mucoadhesion. (2) Methods: PECs were prepared and assessed for interactions. Fluconazole PEC based vaginal inserts were prepared by lyophilization using mannitol. 3¹5¹ factorial design was applied to investigate the effect of the anion type and Chitosan/anion ratio on the inserts mucoadhesion and release properties. The optimized insert [based on 5:5 chitosan: anionic polymer (sodium alginate)] release was modulated by the release retardant; Compritol^® 888. The selected formulation was subjected to microbiological and histological evaluation. (3) Results: Fluconazole inserts showed satisfactory drug content, acceptable friability percentages and highest swelling indices at six hours. Statistical analysis showed significant effect of the studied factors on detachment force and release properties. Microbiological assays revealed significantly higher antifungal activity of inserts compared to fluconazole solution. Reduced inflammatory cells were confirmed by histological evaluation. (4) Conclusion: CH/Alg based vaginal insert could be a promising platform for vaginal delivery of antifungal drugs used for vaginal candidiasis treatment.

Preparation and Characterization of Hydroxypropyl Methylcellulose/Polycarbophil Mucoadhesive Blend Films Using a Mixture Design Approach

The objectives of this study were to prepare the hydroxypropyl methylcellulose (HPMC)/polycarbophil (PC) mucoadhesive blend film and to investigate the main and interaction effect of HPMC and PC mixtures on the physicochemical and mechanical properties of blend films using a simplex lattice mixture design approach. The cubic and quadratic models were selected to analyze mucoadhesive properties in terms of work of adhesion and maximum detachment force, respectively. It was shown that HPMC/PC blend film had higher mucoadhesive properties than pure HPMC film. The suitable models for analyzing swelling index of blend films at various times were assessed. The puncture strength, % elongation and hydrophilicity of films were also examined. The pure HPMC film displayed more homogeneous and smoother structures compared with the blend film, as observed by scanning electron microscope and atomic force microscopy. Intermolecular hydrogen bonding between HPMC and PC was detected using Fourier transform infrared and X-ray diffraction. Therefore, the blend film shows high potential for use as a buccal delivery system.

Microbicides for the Treatment of Sexually Transmitted HIV Infections

Approximately 34 million people were living with human immunodeficiency virus (HIV-1) at the end of 2011. From the last two decades, researchers are actively involved in the development of an effective HIV-1 treatment, but the results intended are still doubtful about the eradication of HIV. The HIV-1 virus has gone from being an "inherently untreatable" infectious agent to the one liable to be affected by a range of approved therapies. Candidate microbicides have been developed to target specific steps in the process of viral transmission. Microbicides are self-administered agents that can be applied to vaginal or rectal mucosal surfaces with the aim of preventing, or reducing, the transmission of sexually transmitted infections (STIs) including HIV-1. The development of efficient, widely available, and low-cost microbicides to prevent sexually transmitted HIV infections should be given high priority. In this review, we studied the various forms of microbicides, their mechanism of action, and their abundant approaches to control the transmission of sexually transmitted infections (STIs).