Functional and radiological evaluations of high-energy tibial plateau fractures treated with double-buttress plate fixation

Bicondylar tibial plateau fracture osteosynthesis with double-plate fixation: Similar complication rates and clinical results but improved radiographic outcomes with dual compared to single approach

INTRODUCTION

Associating posteromedial and anterolateral approaches should improve fracture line visualization and optimize bicondylar tibial plateau fracture reduction compared to a single midline approach. The present study aimed to compare postoperative complications rates and functional and radiographic results after double-plate fixation via either a single or a dual approach. The study hypothesis was that double-plate fixation using a dual approach provides equivalent complications rates with improved radiographic results compared to a single approach.

MATERIAL AND METHODS

A retrospective 2-center study compared bicondylar tibial plateau fractures treated by double-plate fixation on a single versus a dual approach between January 2016 and December 2020. Comparison focused on major complications requiring surgical revision, radiographic measurements of medial proximal tibial angle (MPTA) and posterior proximal tibial angle (PPTA); change from their respective baseline values of 87° and 83° (deltaMPTA and deltaPPTA), and functional results on KOOS, SF12 and EQ5D-3L self-reported questionnaires.

RESULTS

Major complications occurred in 2 of the 20 single approach group patients (10%) [1 surgical site infection (SSI) (5%), and 1 skin complication (5%)], and in 3 of the 39 dual approach group patients (7.69%) (p=0.763), at an average 29 months' follow-up. In the sagittal plane, deltaPPTA was significantly lower with dual than single approach (respectively, 4.67° versus 7.43°; p=0.0104). There were no significant intergroup differences in deltaMPTA or functional results at last follow-up.

CONCLUSION

The present study suggests an absence of significant difference in major complications, between single and dual approach for double-plate osteosynthesis of bicondylar tibial plateau fractures. Using a dual approach enabled improved anatomic restoration in the sagittal plane, without significant differences observed in the frontal plane or functional scores at an average 29months' follow-up.

LEVEL OF EVIDENCE

III; case-control study.

Modified gastrocnemius splitting anatomic approach to the tibial plateau. Medium-term evaluation

BACKGROUND

Posterior tibial plateau fractures, including avulsion fractures of the posterior cruciate ligament (PCL) insertion, represent a challenge for the orthopedic trauma surgeon. These injuries have gained a new perspective both diagnostically and therapeutically after the regular use of multiplanar computed tomography. In the herein study, we describe the outcome of patients sustaining a tibial plateau fracture with posterior articular involvement treated by open reduction and internal fixation (ORIF) using our modified gastrocnemius splitting anatomic approach.

METHODS

This observational retrospective descriptive study was conducted at Complejo Medico de la Policia Federal Argentina Churruca-Visca. All patients were treated by ORIF by our team through our modified gastrocnemius splitting anatomic approach, and followed-up for a minimum of 12 months.

RESULTS

A total of 18 patients sustaining plateau fracture were treated by this approach. Satisfactory tomographic reduction with articular gap and/or step-off <2 mm was achieved in 16. The mean time to the return to activities of daily living was 192.2 days.

CONCLUSION

The modified gastrocnemius splitting anatomic approach represents a good alternative for the management of tibial plateau fractures involving the posterior quadrants.

The Comparative Analysis of Single Plating Versus Double Plating in the Treatment of Unstable Bicondylar Proximal Tibial Plateau Fractures

Introduction In the present study, we aimed to compare the clinical and radiological results of the single lateral locking plate fixation method to the dual plate (DP) fixation method in cases of unstable bicondylar proximal tibial plateau fractures. Materials and methods Fifty-six patients managed surgically with internal fixation for unstable bicondylar tibial plateau fractures (UBTF) (Schatzker type V and type VI or Arbeitsgemeinschaft für Osteosynthesefragen/Orthopaedic Trauma Association {AO/OTA} type 41-C) over 36 months from January 2017 to December 2020 were included in this prospective study. All the fractures were fixed surgically either using dual locking plates through double incisions (DP group) or with a single lateral locking plate (single plate {SP} group). All intraoperative and postoperative complications were assessed and recorded. Oxford Knee Score (OKS), Rasmussen's functional grading system, and Rasmussen's radiological scoring system were used to evaluate the functional and radiological outcomes. Result All of the patients were followed for at least 12 months. Twenty-six patients were fixed with a single lateral locking plate, and 30 patients were fixed with a double-incision dual locking plate. The mean Oxford Knee Score (OKS) was 43.24 ± 4.46 in the DP group and 42.7 ± 2.57 in the SP group (P = 0.544). The mean Rasmussen's functional score (RFS) score in the present study was 26.6 ± 2.21 in the DP group and 24.97 ± 3.92 in the SP group (P = 0.056). At the final follow-up, the mean Rasmussen's radiological score (RRS) was 9.06 ± 1.01 in the DP group and 8.1 ± 0.81 in the SP group (P = 0.0003). Conclusion There are no statistically significant differences in the functional outcomes between the two groups, but higher benefits were found in the radiological outcomes in the dual plating group as compared to single lateral locking plate group.

Bridge Plating Versus Hybrid External Fixation in the Management of Proximal Tibia Metaphyseal Fractures

BACKGROUND

Due to the surge in high-speed road traffic accidents during the past few years, extra-articular proximal tibia fractures have also risen in number. For the treatment of such fractures, various options are available like conservative treatment with casting, surgical treatment with plate osteosynthesis, or a hybrid external fixator. Exposure of the bone surface and extensive soft tissue dissection is needed in bridge plating, posing a risk of bleeding, infection, and soft-tissue healing issues, and the blood supply of the fractured area is also hampered as the periosteum is also destroyed. To avoid these complications, a hybrid external fixator can be used but it has its own risks of malunion, non-union, and pin-tract infections; another drawback is patient compliance. In this study, we compare the clinical and functional outcomes of two treatment modalities, i.e., bridge plating and hybrid external fixator, in the treatment of proximal tibia metaphyseal fractures.

MATERIALS AND METHODS

This prospective randomized study was conducted from February 2021 to June 2022 on 46 adult patients diagnosed with proximal tibia metaphyseal fracture and willing to participate. An odd number of patients were treated with a bridge plate and even with a hybrid external fixator.

RESULTS

A total of 46 patients were included in the study, sustaining proximal tibia metaphyseal fracture, out of which 23 patients underwent hybrid external fixation with an outcome of 69.43 ± 8.11 according to the Knee Society Score (KSS) and 23 for bridge plating which showed better results as their score at final follow-up was 75.00 ± 8.22.

CONCLUSION

According to our study, we found that bridge plating is a better treatment modality than the hybrid external fixator as the former showed better postoperative knee range of motion and functional outcome and led to a smaller number of complications. But the clinical outcome would also be influenced by the type of fracture, degree of comminution, type of injury, i.e., open or closed, and quality of bone.

Single versus double plating for bicondylar tibia plateau fractures: Comparison of range of motion, muscle strength, clinical outcomes and accelerometer-measured physical activity levels

BACKGROUND

Optimal treatment of bicondylar plateau fractures is still a matter of debate. Accelerometer-measured physical activity levels may help us to obtain objective information regarding the quality of life of patients. The aim of this study was to compare the physical activity levels, objective and subjective functional results and stabilities of fixations of patients with treated bicondylar plateau fractures.

METHODS

In this cross-sectional study of 23 patients, accelerometer-measured physical activity levels, daily energy consumption and measurements of knee joint range of motion (ROM) and muscle strength were measured. While Knee Injury and Osteoarthritis Outcome Score (KOOS) was used as a patient-reported outcome measurement, Rasmussen Radiological Score was used for radiological evaluation.

RESULTS

There was no significant difference between the groups in terms of physical activity levels and daily energy consumption (P = 0.667). While Total KOOS, Symptom and Stiffness and Sports Activities scores were higher in patients with a single plate (P = 0.034, P = 0.003 and P = 0.014, respectively), knee flexion and extension ROM and flexor and extensor muscle strength were similar between groups (P = 0.405, P = 0.095, P = 0.982 and P = 0.988, respectively).

CONCLUSIONS

While patient-reported outcome measurements were better with single plating, there was no difference between the groups in terms of physical activity levels, ROM, muscle strength and radiological results. Although it should be kept in mind that the choice of the primary surgeon, the condition of the soft tissue and the fracture geometry are also effective in the decision-making process, single plating seems to be a valid surgical option in the treatment of bicondylar plateau fractures.

Comparative Analysis of Single Lateral Locked Plate and Double Locked Plate Application in the Treatment of Bicondylar Tibial Plateau Fractures

Background and objective

Bicondylar tibial plateau fractures (BTPFs) have been controversial in terms of surgery planning, due to articular joint surface comminution, severe soft tissue injury, and the risk of complications. The aim of this study was to conduct a clinical, functional, and radiologic comparison of the dual locked plate (DLP) and single lateral locked plate (SLLP) techniques.

Methods

Retrospectively analysed were 54 patients who underwent surgical treatment with DLP or SLLP due to the diagnosis of BTPFs, between January 2018 and June 2020. Patients were evaluated in the clinic with regard to their demographic characteristics, mechanisms of injury, follow-up periods, measurement of the range of motion degrees, functional scores, and radiographic parameters. The Knee Injury and Osteoarthritis Outcome Score (KOOS), Lysholm Knee Score (Lysholm) and Oxford Knee Score (OKS) were chosen as the functional scores. The condylar width, medial proximal tibial angle (MPTA), posterior tibial slope (PTS) and fracture union time were calculated radiographically.

Results

The patients in the DLP group achieved significantly higher scores for all three scales when the KOOS, Lysholm, and OKS, respectively (P = 0.008, P = 0.048, P = 0.006), were compared. Radiographically, the mean increase in the condylar width of 1.72 mm in the DLP group and 2.59 mm in the SLLP group was measured (P = 0.010, P = 0.010, respectively). The mean decrease in MPTA was 1.75° in the DLP group and 3.54° in the SLLP group, which was statistically significant (P = 0.005, P = 0.001, respectively). An increase in the posterior tibial slope was measured at a mean of 1.8° in the DLP group and 1.4° in the SLLP group (P = 0.001, P = 0.008, respectively). On the other hand, when the condylar width, MPTA and PTS between the DLP and SLLP groups were compared, no significant difference was found (P = 0.179, P = 0.247, P = 0.611, respectively).

Conclusion

Better results were obtained in patients who underwent the DLP procedure when compared to those who had the SLLP. There was no radiographic difference between the two surgical procedures. Although DLP is an effective and reliable method in the treatment of BTPFs, the SLLP procedure also provides satisfactory results in patients with appropriate indications.

Column specific fixation for complex tibial plateau fractures - Midterm prospective study in South - Indian population

BACKGROUND

Tibial plateau fractures involving two or more columns were routinely assessed by two-dimensional radiography in the past. This often misled surgeons and attention was given only to the medial and lateral column without consideration of the posterior column, especially the postero-medial corner. Luo in 2010 introduced the new three-column classification system based on multiplanar computed tomography images. This study was conducted to assess the outcome after internal fixation of tibial plateau fractures involving two or more columns in our centre based on the column specific approach.

MATERIALS AND METHODS

This was a prospective study conducted at our institute, between 2011 and 2016. Total of 183 patients with tibial plateau fractures involving two or more columns were admitted during this study period of which 123 patients were satisfied our inclusion criteria. 8 patients were lost to follow up. Hence 115 patients with tibial plateau fractures involving two or more columns were classified based on the new three column classification system. Dual column fixation (Anterolateral +Anteromedial) was done in 76 patients, (Anterolateral+Posteromedial) fixation in 25 patients and triple column fixation (Anterolateral + Anteromedial + Posteromedial) in 14 patients. Post operatively patients were assessed by Modified Rasmussen functional and radiological scoring system.

RESULTS

Based on Modified Rasmussen functional scoring system, 73 patients (63.5%) had excellent results, 37 patients (32.2%) had good results and 5 patients (4.3%) had fair results. Based on Modified Rasmussen radiological scoring system, 71 patients (61.7%) had excellent results, 38 patients (33.1%) had good results, 6 patients (5.2%) had fair results. 3 patients had deep infections.

CONCLUSION

Based on our study, we like to conclude that we had good outcomes utilizing this modern column specific approach to the treatment of these two or more column tibial plateau fracture injuries, which includes assessment of three columns.

Mapping recovery in simple and complex tibial plateau fracture fixation

Aims

The aim of this study was to determine the trajectory of recovery following fixation of tibial plateau fractures up to five-year follow-up, including simple (Schatzker I-IV) versus complex (Schatzker V-VI) fractures.

Patients and Methods

Patients undergoing open reduction and internal fixation (ORIF) for tibial plateau fractures were enrolled into a prospective database. Functional outcome, using the 36-Item Short Form Health Survey Physical Component Summary (SF-36 PCS), was collected at baseline, six months, one year, and five years. The trajectory of recovery for complex fractures (Schatzker V and VI) was compared with simple fractures (Schatzker I to IV). Minimal clinically important difference (MCID) was calculated between timepoints. In all, 182 patients were enrolled: 136 (74.7%) in simple and 46 (25.3%) in complex. There were 103 female patients and 79 male patients with a mean age of 45.8 years (15 to 86).

Results

Mean SF-36 PCS improved significantly in both groups from six to 12 months (p < 0.001) and one to five years (simple, p = 0.008; complex, p = 0.007). In both groups, the baseline scores were not reached at five years. The SF-36 PCS was significantly higher in the simple group compared with the complex group at both six months (p = 0.007) and 12 months (p = 0.01), but not at five years (p = 0.17). Between each timepoint, approximately 50% or more of the patients in each group achieved an MCID in their score change, indicating a significant clinical change in condition. The complex group had a much larger drop off in the first six months, with comparable proportions achieving MCID at the subsequent time intervals.

Conclusion

Tibial plateau fracture recovery was characterized overall by an initial decline in functional outcome from baseline, followed by a steep improvement from six to 12 months, and ongoing recovery up to five years. In simple patterns, patients tended to achieve a higher functional score by six months compared with the complex patterns. However, comparable functional scores between the groups achieved only at the five-year point suggest later recovery in the complex group. Function does not improve to baseline by five years in either group. This information is useful in counselling patients about the course of prospective recovery. Cite this article: Bone Joint J 2019;101-B:1009–1014.

Outcome of complex tibial plateau fractures with Ilizarov external fixation with or without minimal internal fixation

PURPOSE

To evaluate the clinico-radiological outcome of complex tibial plateau fractures treated with Ilizarov external fixation with or without minimal internal fixation.

METHODS

This retrospective review was conducted on all the cases of Schatzker types V and VI tibial plateau fractures treated by Ilizarov external fixation between July 2006 and December 2015 with the minimum follow-up duration of one year. There were 30 patients: 24 males and 6 females, mean age 43.33 years, and mean follow-up 3.6 years. Three of them were open fractures; 15 cases were Schatzkertype V fractures and the other 15 type VI. According to AO/OTA classification, there were 11 type C1, 12 C2 and 7 type C3 fractures. Outcome assessment was made with American Knee Society Score (AKSS) and Rasmussen's Radiological Score (RRS) at final follow-up.

RESULTS

Out of the 30 cases, mini-open reduction was performed in 7, bone graft in 4, minimal internal fixation in 10 and knee temporary immobilisation in 11 patients. Mean duration of external fixation was 11.8 weeks. All fractures united. Pin tract infections in 7 and common peroneal neuropathy in 2 patients were self-limiting. Two patients had axial misalignment of less than 10°. At final follow-up, the mean knee range of motion was 114.7, mean AKSS 81.5 and mean RRS 16.7. On statistical analysis, Schatzker type of fractures, use of minimal internal fixation and knee-spanning did not influence the final outcome.

CONCLUSION

Ilizarov external fixator with or without minimal internal fixation provides acceptable outcome for complex tibial plateau fractures. Care must be taken to look for minor loss of alignment, especially in Type VI Schatzker fractures after removal of the fixator. However small sample size precludes firm conclusions.

Preliminary application of three-dimension printing technology in surgical management of bicondylar tibial plateau fractures

OBJECTIVE

Surgical management of bicondylar tibial plateau fractures, which is frequently associate with high wound complication rates and functional impairment, remains a challenge for orthopedic surgeons. Recently, the emergence of three-dimension(3D) printing provided orthopedic surgeons with a new technology which has revolutionary impacts on surgical planning, operative guidance and custom-made implants manufacture. The aim of this study is to explore the clinical feasibility and application value of 3D printing in the surgical management of bicondylar tibial plateau fractures.

METHOD

Data of this retrospective study was collected from 11 patients suffering bicondylar tibial plateau fracture from October 2015 to August 2016. All of them underwent surgical treatment with the assistance of 3D printing technology. Real-size solid models and screw guide templates were printed for preoperative planning, surgical simulation and intraoperative guidance. Patients' Demographics, surgery duration, intraoperative blood loss, the accuracy of preoperative planning were recorded and evaluated.

RESULT

The 3D printed models successfully provided the omni-directional exhibition of the fracture morphology. Model-based surgical simulation procedures and pre-selection of implants were generally consistent with the results of actual surgeries. There were no significant differences between the length of the osteosynthesis screws and that of actual surgeries (59.43 ± 11.13 mm vs 60.14 ± 12.05 mm). Beyond that, other parameters, such as surgical duration, intraoperative blood loss and HSS scores was satisfactory according to the surgical records and follow-up.

CONCLUSIONS

According to our experience, the assistance of 3D printing technology in the surgical management of bicondylar tibial plateau fractures provides a comprehensive understanding of fracture features, an accurate patient-specific preoperative planning and an intraoperative guidance for real surgeries, thus leading to the optimization of clinical outcomes.

Contribution of minimally invasive bone augmentation to primary stabilization of the osteosynthesis of Schatzker type II tibial plateau fractures: Balloon vs bone tamp

BACKGROUND

Schatzker type II tibial plateau fractures necessitate the least invasive treatment possible. Arthroscopic reduction by bone tamp followed by osteosynthesis is the current gold standard for this type of tibial plateau fracture. The objective of this study was to compare this technique to anterior approach tuberoplasty with balloon reduction. The comparison criteria were residual articular step off, metaphyseal cavity volume formed during reduction, and mechanical strength to separation and to depression displacement.

METHODS

Fractures were created on 12 human cadaveric tibiae and reduced by a minimally invasive approach in six specimens by a balloon, and by bone tamp in the six others. Articular step off and metaphyseal-epiphyseal cavity volume were measured by TDM. Mechanical tests were performed up to assembly failure to characterize structural strength. Secondary displacements, fracture depression displacement and separation were measured by optical methods.

FINDINGS

There was no significant difference in step off measurement after balloon reduction or bone tamp (0.29 cm vs 0.37 cm; p = 0.06). The cavity volume formed by balloon reduction was significantly smaller than the volume created by bone tamp reduction (0.45 cm³ vs 5.12 cm; p = 0.002). The compressive load required for assembly failure was significantly greater in the balloon group than in the bone tamp group (1210.17 N vs 624.50 N; p = 0.015).

INTERPRETATION

There exists a correlation between load to failure of the assembly frame and the metaphyseal volume required for bone fracture reduction. The minimally invasive balloon technique has fewer negative effects on the osseous stock, thereby enabling better primary structural strength of the fracture.

Duration of incapacity of work after tibial plateau fracture is affected by work intensity

BACKGROUND

Tibial plateau fractures requiring surgery are severe injuries of the lower extremity. Tibial plateau fractures have an impact not only on physically demanding jobs but notably on general professional life too. The aim of this study was to assess how the professional activity of patients will be affected after a tibial plateau fracture.

METHODS

39 consecutive patients (ages 20-61 years) were retrospectively included in the study and were clinically examined at a minimum of 14 month postoperatively. Inclusion criteria were surgical treatment of tibial plateau fractures between November 2009 and December 2012. The clinical evaluation included the Lysholm score and the Oxford Knee Score. Fractures were classified and analyzed using the AO classification. Intensity of work was classified as established by the REFA Association. The patients themselves provided postoperative duration of the incapacity of work and subjective ratings.

RESULTS

17 (43.6%) women and 22 (56.4%) men were examined with a mean follow-up of 29.7 ± 10.4 months (range 14-47). According to the AO classification there were 20 (51.3%) B-type-fractures and 19 (48.7%) C-type-fractures. The median incapacity of work was 120 days (range 10-700 days) with no significant differences between B- and C-type-fractures. Four (10.3%) patients reduced their working hours by 10.5 h per week on average. Patients with low workload (REFA 0-1, median incapacity of work 90 days, range 10-390 days) had a significant shorter incapacity of work than patients with heavy workload (REFA 2-4, median incapacity of work 180 days, range 90-700 days) (p < 0.05). The median Lysholm score decreased significantly from 100 points (range 69-100) before the injury to 73 points (range 23-100) at the time of the follow-up. All patients received postoperative physiotherapy (median 25 appointments, range 6-330), with a significant higher number of appointments for C-type-fractures than for B-type-fractures (p = 0.004).

CONCLUSION

A relationship was found between workload and the duration of incapacity of work after tibial plateau fractures. The post-injury shift to less demanding jobs and the reduction of working hours highlight the impact of a tibial plateau fracture on a patient's subsequent physical ability to work.

Characteristics of postoperative weight bearing and management protocols for tibial plateau fractures: Findings from a scoping review

OBJECTIVE

To identify and describe the characteristics of existing practices for postoperative weight bearing and management of tibial plateau fractures (TPFs), identify gaps in the literature, and inform the design of future research.

METHODS

Seven electronic databases and clinical trial registers were searched from inception until November 17th 2016. Studies were included if they reported on the surgical management of TPFs, had a mean follow-up time of ≥1year and provided data on postoperative management protocols. Data were extracted and synthesized according to study demographics, patient characteristics and postoperative management (weight bearing regimes, immobilisation devices, exercises and complications).

RESULTS

124 studies were included involving 5156 patients with TPFs. The mean age across studies was 45.1 years (range 20.8-72; 60% male), with a mean follow-up of 34.9 months (range 12-264). The most frequent fracture types were AO/OTA classification 41-B3 (29.5%) and C3 (25%). The most commonly reported non-weight bearing time after surgery was 4-6 weeks (39% of studies), with a further 4-6 weeks of partial weight bearing (51% of studies), resulting in 9-12 weeks before full weight bearing status was recommended (55% of studies). Loading recommendations for initial weight bearing were most commonly toe-touch/<10kg (28%), 10kg-20kg (33%) and progressive (39%). Time to full weight bearing was positively correlated with the proportion of fractures of AO/OTA type C (r=0.465, p=0.029) and Schatzker type IV-VI (r=0.614, p<0.001). Similar rates of rigid (47%) and hinged braces were reported (58%), most frequently for 3-6 weeks (43% of studies). Complication rates averaged 2% of patients (range 0-26%) for abnormal varus/valgus and 1% (range 0-22%) for non-union or delayed union.

CONCLUSIONS

Postoperative rehabilitation for TPFs most commonly involves significant non-weight bearing time before full weight bearing is recommended at 9-12 weeks. Partial weight bearing protocols and brace use were varied. Type of rehabilitation may be an important factor influencing recovery, with future high quality prospective studies required to determine the impact of different protocols on clinical and radiological outcomes.

Functional and Radiological Outcome of Schatzker type V and VI Tibial Plateau Fracture Treatment with Dual Plates with Minimum 3 years follow-up: A Prospective Study

INTRODUCTION

High energy intra-articular fractures involving the tibial plateau causes various problems related to management like wound dehiscence, severe comminution leading to malalignment and delayed complications like varus collapse, implant failure and arthritis of knee joint.

AIM

This study was done to determine functional, radiological outcome and the complications of Schatzker V and VI tibial plateau fractures treated with bipillar plating with dual plates with a regular follow-up of atleast 3 years.

MATERIALS AND METHODS

Total 34 cases of tibial plateau fracture type V and VI treated with dual plating were studied from January 2011 to December 2013 in KIMS Hospital were followed for minimum of 3 years. The patients were operated through an anterolateral approach for lateral plate and a medial column plate was put through a minimally invasive medial approach or an open posteromedial approach.

RESULTS

Total 34 patients were evaluated postoperatively thoroughly for functional outcome using The Knee Society Score and radiological outcomes by Modified Rasmussen Assessment criteria which showed 29 patients (85.29%) had excellent and 5 patients (14.71%) had good objective knee society score. 24 patients (70.59%) had excellent, 8 patients (23.53%) had good and 1patient (2.94%) were each of poor and fair functional knee society score. Eleven patients (32.35%) had excellent, 21patients (61.76%) had good and 2 patients (5.88%) had fair radiological outcome.

CONCLUSION

We conclude that open reduction and internal fixation of high-energy tibial plateau fractures with dual plates via 2 incisions gives excellent to good functional outcome with minimal soft tissue complications. Thus, a minimally invasive approach should be used which helps in preventing soft tissue problems and helps in early wound healing. Fixation done by bipillar plating is important for early mobilization of knee joint. Early mobilization leads to better range of movements and thereby better functional outcome.

What's new in the management of complex tibial plateau fractures?

The management of complex tibial plateau fractures is ever evolving. The severity of the injury to the surrounding soft tissues influences the timing and the method of fixation. Minimal invasive techniques continue to dominate our philosophy of reduction and reconstruction whereas augmentation of depressed intra-articular fragments remains an accepted strategy to maintain reduction and prevent secondary collapse. Locking plates, conventional plates and fine wire fixators all have been used successfully with satisfactory outcomes. In this article we report on the latest advances made in the management of these complex injuries.

Surgical Management of Tibial Plateau Fractures With 3.5 mm Simple Plates

BACKGROUND

Tibial plateau fractures can be successfully fixed utilizing 3.5 mm locking plates. However, there are some disadvantages to using these plates.

OBJECTIVES

In the current prospective study, we investigated the outcome of treating different types of tibial plateau fractures with 3.5 mm simple plates which, to our knowledge, has not been evaluated in previous studies.

MATERIALS AND METHODS

Between 2011 and 2013, 32 patients aged 40 ± 0.2 years underwent open reduction and internal fixation for tibial plateau fractures with 3.5 mm simple plates. The patients were followed for 16.14 ± 2.1 months. At each patient's final visit, the articular surface depression, medial proximal tibial angle, and slope angle were measured and compared with measurements taken early after the operation. The functional outcomes were measured with the WOMAC and Lysholm knee scores.

RESULTS

The mean union time was 13 ± 1.2 weeks. The mean knee range of motion was 116.8° ± 3.3°. The mean WOMAC and Lysholm scores were 83.5 ± 1.8 and 76.8 ± 1.6, respectively. On the early postoperative and final X-rays, 87.5% and 84% of patients, respectively, had acceptable reduction. Medial proximal tibial and slope angles did not change significantly by the last visit. No patient was found to have complications related to the type of plate.

CONCLUSIONS

In this case series study, the fixation of different types of tibial plateau fractures with 3.5 mm simple non-locking and non-precontoured plates was associated with acceptable clinical, functional, and radiographic outcomes. Based on the advantages and costs of these plates, the authors recommend using 3.5 mm simple plates for different types of tibial plateau fractures.

Use of a raft construct through a locking plate without bone grafting for split-depression tibial plateau fractures

PURPOSE

To review the outcome after open reduction and internal fixation using a periarticular raft construct through a locking plate without bone grafting for split-depression tibial plateau fractures.

METHODS

Records of 38 knees in 31 men and 7 women aged 25 to 75 (mean, 42.7) years who underwent open reduction and internal fixation using a periarticular raft construct through a locking plate without use of a bone graft or bone substitute for split-depression (>5 mm) proximal tibial plateau fractures (Schatzker type II or AO/OTA type 4.1 B3) were reviewed. The integrity of the articular surface was assessed using radiographs. The Rasmussen radiological score and clinical score, the Lysholm knee score, and the Tegner activity score were also assessed.

RESULTS

The mean follow-up period was 22.8 (range, 6-36) months. All patients achieved bone union after a mean of 13.2 (range, 8-26) weeks. The mean range of motion was 118º (range, 100º-130º). The Rasmussen radiological score was excellent in 27 patients, good in 9, and fair in 2. The Rasmussen clinical score was excellent in 15 patients, good in 21, and fair in 2. The Lysholm knee score was excellent in 26 patients, good in 8, and fair in 4. 32 of the 38 patients recovered to their preoperative Tegner activity scores. Only one patient with severe comminution had loss of reduction after full weightbearing.

CONCLUSION

Fixation using a periarticular raft construct through a locking plate without use of a bone graft or bone substitute for split-depression proximal tibial plateau fractures is a viable option.

Complications of high-energy bicondylar tibial plateau fractures treated with dual plating through 2 incisions

OBJECTIVES

To characterize the rate of complications after operative fixation of bicondylar (OTA/AO 41-C) tibial plateau fractures and to evaluate the contribution of common risk factors.

DESIGN

Retrospective review.

SETTING

Level 1 regional trauma center.

PATIENTS/PARTICIPANTS

One hundred thirty-eight patients older than 18 years with 140 bicondylar tibial plateau fractures were participated in this study.

INTERVENTION

Open reduction and internal fixation using medial and lateral plate construct through 2 incisions.

MAIN OUTCOME MEASUREMENTS

Development of a deep infection or a nonunion.

RESULTS

The overall major complication rate was 27.9%: 23.6% deep infection and 10.0% nonunion. Open fractures were associated with a higher rate of infection: 43.8% versus 21.0% for closed injuries (odds ratio = 2.96, P = 0.05). Fasciotomy closure before definitive fixation was associated with significantly fewer deep infections compared with internal fixation with open fasciotomy wounds: 11.8% versus 50.0% (odds ratio = 7.5, P = 0.05). The presence of compartment syndrome, tobacco use, diabetes, and timing of surgery had no statistically significant association on the rate of infection or nonunion.

CONCLUSIONS

Nonunion and deep infections occur commonly after staged open reduction and internal fixation of high-energy tibial plateau fractures. Open fractures and open fasciotomy wounds at the time of internal fixation are associated with higher rates of infection.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

An efficacy analysis of surgical timing and procedures for high-energy complex tibial plateau fractures

OBJECTIVE

To identify the most effective treatment for application to high-energy complex plateau fractures.

METHODS

125 patients with closed high-energy complex tibial plateau fractures who had been surgically treated between 2003 and 2010 were reviewed retrospectively. Five procedure methods were studied (e.g. four open reduction and internal fixations, and close reduction via a minimal incision with hybrid external fixation) in five surgical timings, with a control group. The incidence of wound complications after operative treatment in the five surgical timings and the clinical effects of the five surgical procedure options were evaluated statistically. A postoperative follow-up ranging 26-110 months (mean, 36.5 months) was performed.

RESULTS

Among the various groups, the respective overall wound complication incidences were 20.0%, 41.6%, 33.3%, 2.5%, and 16.7% within 4 hours, 4 hours to 3 days, 3-5 days, 5-8 days, and more than 8 days after injury. Failed fixation was clearly observed in Group 1 (23.1%, 6/26) and Group 5 (21.7%, 5/23) (P < 0.05). Significant differences were also found among Group 2 (92.6%), Group 3 (93.3%), and Group 5 (69.6%), in terms of the good and excellent rate of joint function according to the Rasmussen score (P < 0.05).

CONCLUSION

The optimal surgical timing is within 4 hours after trauma, for which no obvious swelling was observed in the limbs. This is followed by surgical timing within 5-8 days, after which trauma showed only subsided limb swelling. Dual plating provides the best stabilization option, as it allows early joint mobilization, cartilage regeneration, and joint remodeling, thus decreasing the risk of joint stiffness. Hybrid external fixation may provide relative stability to maintain fracture alignment without the need for massive soft tissue dissection, and also minimizes blood loss and potential soft tissue complications.

Fixed-angle plates in patella fractures - a pilot cadaver study

Objective

Modified anterior tension wiring with K-wires and cannulated lag screws with anterior tension wiring are currently the fixation of choice for patellar fractures. Failure of fixation, migration of the wires, postoperative pain and resulting revision surgery, however, are not uncommon. After preliminary biomechanical testing of a new fixed-angle plate system especially designed for fixation of patella fractures the aim of this study was to evaluate the surgical and anatomical feasibility of implanting such a plate-device at the human patella.

Methods

In six fresh unfixed female cadavers without history of previous fractures around the knee (average age 88.8 years) a bilateral fixed-angle plate fixation of the patella was carried out after previous placement of a transverse central osteotomy. Operative time, intra-operative problems, degree of retropatellar arthritis (following Outerbridge), quality of reduction and existence of any intraarticular screw placement have been raised. In addition, lateral and anteroposterior radiographs of all specimens were made.

Results

Due to the high average age of 88.8 years no patella showed an unimpaired retropatellar articular surface and all were severely osteoporotic, which made a secure fixation of the reduction forceps during surgery difficult. The operation time averaged 49 minutes (range: 36-65). Although in postoperative X-rays the fracture gap between the fragments was still visible, the analysis of the retropatellar surface showed no residual articular step or dehiscence > 0.5 mm. Also in a total of 24 inserted screws not one intraarticular malposition was found. No intraoperative complications were noticed.

Conclusions

Osteosynthesis of a medial third patella fracture with a bilateral fixed-angle plate-device is surgically and anatomically feasible without difficulties. Further studies have to depict whether the bilateral fixed-angle plate-osteosynthesis of the patella displays advantages over the established operative procedures.