Synthesis, Characterization, and Microwave Absorption Properties of Reduced Graphene Oxide/Strontium Ferrite/Polyaniline Nanocomposites

CoFe2O4/PANI/MWCNTs ternary hybrid composites. Synthesis, characterization, the effect of MWCNTs ratio and dye removal capability

We have synthesized cobalt ferrite (CoFe2O4) using the sucrose auto-combustion method and subsequently employed the in situ polymerization technique to fabricate ternary composites comprising CoFe2O4, polyaniline (PANI), and multi-walled carbon nanotubes (MWCNTs). In this novel investigation, we explored the influence of varying MWCNTs ratios on these composites' structural, magnetic, thermal, and electrical properties. The crystal structures of the synthesized composites were analyzed using X-ray diffraction (XRD), while Fourier transform infrared (FT-IR) spectroscopy revealed changes in bonding patterns, including the disappearance of ferrite bonds and the emergence of new ones. Transmission electron microscopy (TEM) images illustrated a complete coating of PANI on both MWCNTs and CoFe2O4 particles, resulting in a substantial reduction in magnetization compared to pure CoFe2O4 ferrite due to PANI's nonmagnetic nature. Vibrating sample magnetometer (VSM) measurements confirmed this reduction, indicating a decrease to 7.3 emu.g-1. Thermal analysis demonstrated an enhancement in thermal stability with increasing MWCNTs content, as evidenced by an increase in the temperature equivalent for half decomposition (T50) from 486 to 522 °C for composites with 40% MWCNTs. Moreover, the electrical conductivity showed a corresponding rise with MWCNTs content, increasing from 3.1 × 10-3 Ω-1.cm-1 to 2.2 × 10-2 Ω-1.cm-1, possibly indicating charge transfer from PANI to MWCNTs. To assess practical applications, we investigated the ability of the composite with 40% MWCNTs to remove phenol red (PR) dye from aqueous solutions. Through a systematic study of adsorption parameters and kinetics, we determined optimal conditions for effective dye removal and elucidated the underlying adsorption mechanism. Our results demonstrated the composite's efficiency in dye removal, with a 6.4 mg·g-1 capacity for PR dye, highlighting its potential for environmental remediation efforts.

Titanium doped cobalt ferrite fabricated graphene oxide nanocomposite for efficient photocatalytic and antibacterial activities

Dyes and microbes are the main sources of water pollution and their treatment with titanium doped cobalt ferrite nanoparticles (CoTixFe2-xO4 NPs) is highly challenging due to the recombination ability of their electron-hole pairs which could be mitigated by making their composite with graphene oxide (GO). In the present study, titanium doped cobalt ferrite was fabricated on GO (CoTi0.2Fe1.8O4/GO NC) via the facile ultrasonication method and its confirmation was done by various analytical studies. Homogeneous dispersion of spherical CoTi0.2Fe1.8O4 NPs on the GO surface was realized by SEM analysis. Excellent crystallinity was corroborated by XRD while a Zeta Potential value -21.52 mV depicted exceptional stability. The photocatalytic power of CoTi0.2Fe1.8O/GO NC against Congo Red (CR) dye showed 91% degradation efficiency after 120 min visible light irradiation under optimum conditions of pH 9 and dye concentration 1 mg L-1 which was reasonably higher as compared to bare CoTi0.2Fe1.8O NPs (78% degradation efficiency). The improved photocatalytic performance is accredited to its narrow bandgap value (1.07 eV) and enhanced charge separation as indicated by the Tauc plot and Photoluminescence analysis, respectively. Additionally, CoTi0.2Fe1.8O/GO NC could be readily regenerated and reused five times with only ∼2% performance loss. Meanwhile, MICs of CoTi0.2Fe1.8O4/GO NC against P. aeruginosa and S. aureus were 0.046 and 0.093 mg mL-1 while MBCs were 0.093 and 0.187 mg mL-1, respectively. Thereby, optimized NC can open new avenues for the degradation of dyes from polluted water besides acting as a promising antimicrobial agent by rupturing the cell walls of pathogens.

A polymer sponge with dual absorption of mechanical and electromagnetic energy

Polyaniline, a modified conductive polymer, has been widely studied in the field of electromagnetic (EM) wave absorption due to its excellent dielectric and conductive properties. However, it has limited applications due to its hard molding and processing, and poor mechanical stability. In this study, ice crystals with rapid directional growth were used as templates for polymerization to obtain polymer precursors with directional channels, and then ternary polymer sponges with oriented pore channels were designed and synthesized using a secondary template method. The Poisson's ratio of the study material reaches -1.52 and it absorbs 5.1 mJ/cm³ energy in a single compression cycle at 25% longitudinal strain. Also, the material has more than 90% absorption efficiency for X-band EM waves at a thickness of 4 mm. The flexibility of polymer molecular chains and the arrangement of oriented pores are the reasons for the negative Poisson's ratio property of the material, while the key to the loss of EM energy in the absorption process is the conversion of quinone bipolaron to monopolaron structure. Due to its large-scale green preparation with ice crystal as the template, this lightweight and robust material system are ideal for absorbing EM waves under extreme conditions.

Investigation of structural, morphological and magnetic properties of nanostructured strontium hexaferrite through co-precipitation technique: Impacts of annealing temperature and Fe/Sr ratio

M-type strontium hexaferrite (SrM) were successfully synthesized from Sr²⁺ and Fe³⁺ precursor salt through co-precipitation technique. Different higher sintering temperatures (800-1000 °C) were used to get the desired SrM with variation of Fe³⁺/Sr²⁺ mole ratio as well. The characterization of SrM and its properties were investigated using modern instrumental techniques viz. X-ray diffraction (XRD), Fourier Transform Infrared Spectrometer, Scanning Electron Microscopy, Vibrating Sample Magnetometer, UV-Visible NIR Spectrometer, Impedance Analyzer and Thermal Conductivity Meter. The phase of the synthesized SrM were confirmed by comparing the XRD patterns with the standard ICDD data and Reitvelt Refinement for the SrM having Fe³⁺/Sr²⁺ ratio 10 and SrM with distinct annealing temperature were performed. The structural parameters, particle size (75 nm-318 nm) and shape of the as prepared samples were changed with calcination temperature as well as mole ratio. The saturation magnetization (73.77-24.27 emu/g), coercivity (3732.28-642.10 Oe) and remanant magnetization (39.15-8.86 emu/g) were varied with calcination temperature and composition. The dielectric properties, optical properties and thermophysical properties were measured for the SrM keeping Fe³⁺/Sr²⁺ ratio 10 calcined at 1000 °C. The synthesized SrM can be applied in magnetic recording media and as photocatalyst due to its low coercivity (2764.48 Oe), high saturation magnetization (73.77 emu/g) and low band gap energy (Eg-2.04 eV) respectively.

Graphene oxide enhances thermal stability and microwave absorption/regeneration of a porous polymer

Microwave regeneration of adsorbents offers several advantages over conventional regeneration methods; however, its application for microwave transparent adsorbents such as polymers is challenging. In this study, hypercrosslinked polymer/graphene oxide (GO) nanocomposites with large surface area and enhanced microwave absorption ability were synthesized. Polymers of 4, 4´-bis ((chloromethyl)-1, 1´-biphenyl- benzyl chloride) were hypercrosslinked through the Friedel-Crafts reactions. GO sheets were synthesized through the Hummer's method. Nanocomposites with different GO contents (1-8 wt%) were synthesized by solution mixing method. Thermogravimetry analysis revealed a large enhancement in the thermal stability of GO-filled nanocomposites compared to pristine polymer. N₂ adsorption isotherm analysis showed 7% and 10% reduction in BET surface area and total pore volume of the nanocomposite with 8 wt% GO. Compared to the pristine polymer, the dielectric constant and dielectric loss factor increased from 5 to 17 and 0.05-1.6, respectively, for the nanocomposites with 8 wt% GO. Microwave-assisted desorption of toluene from samples revealed more than 160 ºC and 4 times improvement in the desorption temperature and desorption efficiency, respectively, by addition of 4 wt% GO to the polymer. This study showed the important role of GO addition for efficient microwave-assisted regeneration of polymer adsorbents.

Synergistic effect of GO/SrFe12O19 as magnetic hybrid nanocatalyst for regioselective ring-opening of epoxides with amines under eco-friendly conditions

Highly efficient magnetically separable hybrid GO/SrFe12O19 nanocomposite was synthesized, as catalyst for epoxide ring-opening, via dispersing M-type strontium hexaferrite (SrFe12O19) on graphene oxide (GO) sheets.

Electromagnetic performance, optical and physiochemical features of CaTiO3/NiO and SrFe12O19/NiO nanocomposites based bilayer absorber

Herein, two distinct nanocomposites of CaTiO₃ micro-cubes and polygonal SrFe₁₂O₁₉, both decorated with NiO nanoparticles, were successfully synthesized using hydrothermal method. The physico-chemical features of as-prepared samples were evaluated via XRD, FTIR, UV-vis, BET, XPS, FESEM and EDS analysis. Microwave attenuation features of as-prepared single layer absorbers were determined by VNA analysis in 2-18 GHz. Simulation confirmation was checked by preparing a bi-layer samples and evaluating it using VNA analysis after finding the appropriate thickness of each layer. The reflection loss from each single layer samples containing 20 wt% of each CaTiO₃/NiO and SrFe₁₂O₁₉/NiO nanocomposites were -16 dB and -35 dB at 6.3 GHz with 2.5 mm matching thickness respectively. However, the RL was -34 dB at 10 GHz frequency with 2 mm thickness in a bilayer absorber with SrFe₁₂O₁₉/NiO nanocomposite layer put as absorbing layer with 1 mm thickness and CaTiO₃/NiO positioned as matching layer with 1 mm thickness. Furthermore, at the X-band frequency, approximately entire band absorption is obtained. The findings demonstrate that adjusting the order and thickness of the layers in a bilayer absorber may readily improve microwave absorption performance. By comparing the results of simulation with real prepared bilayer absorbers, we found that with a 2 mm overall thickness, the bi-layer absorbers display accurate RL values, but not the matching frequency monitored in the simulation process. In reality, this discrepancy was unavoidable.

Functionalized-CNT Polymer Composite for Microwave and Electromagnetic Shielding

In this research work, we studied the microwave properties of multi-wall carbon nanotube (MWCNT) surface functionalized with metallic oxides composites. Three different concentrations (5%, 10%, and 20%) of metallic oxides were used, namely cobalt, iron, and cobalt ferrite. The surface-decorated CNTS were impregnated into polyurethane (PU) matrix. The surface-decorated MWCNTs and the MWCNTs-PU composites were characterized using electron microscopy. The dielectric properties of the samples are studied using an open-ended coaxial probe technique in a wide frequency range of (5–50 GHz). The metallic oxide-decorated surface MWCNTs-PU composites demonstrated different microwave-frequency absorption characteristics depending on the concentration of the metallic oxides.

A breathable and flexible fiber cloth based on cellulose/polyaniline cellular membrane for microwave shielding and absorbing applications

High-performance electromagnetic (EM) wave absorption and shielding materials integrating with flexibility, air permeability, and anti-fatigue characteristics are of great potential in portable and wearable electronics. These materials usually prepared by depositing metal or alloy coatings on fabrics. However, the shortcomings of heavy weight and easy corrosion hamper its application. In this work, the cellulose nanofiber (CF) fabric was prepared by electrospinning technology. Then, conductive polyaniline (PANI) was deposited on the CF surface via a facile in-situ polymerization process. The interweaving cellulose/polyaniline nanofiber (CPF) composite constructs a conductive network, and the electrical conductivity can be adjusted by polymerization time. Benefiting from optimal impedance matching, strong conductive loss, as well as interfacial polarization, the CPF possesses excellent EM absorption performance. The minimum reflection loss (RL_min) value is -49.24 dB, and the effective absorption bandwidth (RL < -10 dB, f_e) reaches 6.90 GHz. Furthermore, the CPF also exhibits outstanding electromagnetic interference (EMI) shielding capability with shielding efficiency (SE) of 34.93 dB in the whole X band. Most importantly, the lightweight CPF fabrics have the merits of mechanical flexibility, breathability and wash resistance, which is highly applicable for wearable devices.

Effects of Recycled Fe2O3 Nanofiller on the Structural, Thermal, Mechanical, Dielectric, and Magnetic Properties of PTFE Matrix

The purpose of this study was to improve the dielectric, magnetic, and thermal properties of polytetrafluoroethylene (PTFE) composites using recycled Fe₂O₃ (rFe₂O₃) nanofiller. Hematite (Fe₂O₃) was recycled from mill scale waste and the particle size was reduced to 11.3 nm after 6 h of high-energy ball milling. Different compositions (5–25 wt %) of rFe₂O₃ nanoparticles were incorporated as a filler in the PTFE matrix through a hydraulic pressing and sintering method in order to fabricate rFe₂O₃–PTFE nanocomposites. The microstructure properties of rFe₂O₃ nanoparticles and the nanocomposites were characterized through X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and high-resolution transmission electron microscopy (HRTEM). The thermal expansion coefficients (CTEs) of the PTFE matrix and nanocomposites were determined using a dilatometer apparatus. The complex permittivity and permeability were measured using rectangular waveguide connected to vector network analyzer (VNA) in the frequency range 8.2–12.4 GHz. The CTE of PTFE matrix decreased from 65.28×10−6/°C to 39.84×10−6/°C when the filler loading increased to 25 wt %. The real (ε′) and imaginary (ε″) parts of permittivity increased with the rFe₂O₃ loading and reached maximum values of 3.1 and 0.23 at 8 GHz when the filler loading was increased from 5 to 25 wt %. A maximum complex permeability of 1.1−j0.07 was also achieved by 25 wt % nanocomposite at 10 GHz.

Functionalized Graphene/Nickel/Polyaniline Ternary Nanocomposites: Fabrication and Application as Electromagnetic Wave Absorbers

The evolution of high electromagnetic absorption materials is essential in the fast growing electronic industry in overcoming electromagnetic pollution. In view of this, a series of Ni nanoparticle-decorated functionalized graphene sheets (FG/Ni) are synthesized by a solvothermal method using different ratios of FG/Ni precursors. Subsequently, FG/Ni is subjected to in situ polymerization of aniline to form FG/Ni/PANI ternary composites and characterized. The total electromagnetic interference shielding efficiency (SE_T) measurements on FG/Ni/PANI with an optimized FG/Ni ratio (50 mg:600 mg NiCl₂·6H₂O) exhibit enhanced performance, i.e., ∼47-65 dB (2-3.8 GHz) and ∼65-45 dB (3.8-8 GHz), following absorption as the dominant mechanism due to the matching of dielectric loss and magnetic loss. It is anticipated that such excellent performance of robust FG/Ni/PANI ternary composites at a very low thickness (0.5 mm) has great potential in the application of microwave-absorbing materials.

Excellent, Lightweight and Flexible Electromagnetic Interference Shielding Nanocomposites Based on Polypropylene with MnFe2O4 Spinel Ferrite Nanoparticles and Reduced Graphene Oxide

In this work, various tunable sized spinel ferrite MnFe₂O₄ nanoparticles (namely MF20, MF40, MF60 and MF80) with reduced graphene oxide (RGO) were embedded in a polypropylene (PP) matrix. The particle size and structural feature of magnetic filler MnFe₂O₄ nanoparticles were controlled by sonochemical synthesis time 20 min, 40 min, 60 min and 80 min. As a result, the electromagnetic interference shielding characteristics of developed nanocomposites MF20-RGO-PP, MF40-RGO-PP, MF60-RGO-PP and MF80-RGO-PP were also controlled by tuning of magnetic/dielectric loss. The maximum value of total shielding effectiveness (SE_T) was 71.3 dB for the MF80-RGO-PP nanocomposite sample with a thickness of 0.5 mm in the frequency range (8.2–12.4 GHz). This lightweight, flexible and thin nanocomposite sheet based on the appropriate size of MnFe₂O₄ nanoparticles with reduced graphene oxide demonstrates a high-performance advanced nanocomposite for cutting-edge electromagnetic interference shielding application.

A Study on Microwave Absorption Properties of Carbon Black and Ni0.6Zn0.4Fe2O4 Nanocomposites by Tuning the Matching-Absorbing Layer Structures

Microwave absorption properties were systematically studied for double-layer carbon black/epoxy resin (CB) and Ni_0.6Zn_0.4Fe₂O₄/epoxy resin (F) nanocomposites in the frequency range of 8 to 18 GHz. The Ni_0.6Zn_0.4Fe₂O₄ nanoparticles were synthesized via high energy ball milling with subsequent sintering while carbon black was commercially purchased. The materials were later incorporated into epoxy resin to fabricate double-layer composite structures with total thicknesses of 2 and 3 mm. The CB1/F1, in which carbon black as matching and ferrite as absorbing layer with each thickness of 1 mm, showed the highest microwave absorption of more than 99.9%, with minimum reflection loss of −33.8 dB but with an absorption bandwidth of only 2.7 GHz. Double layer absorbers with F1/CB1(ferrite as matching and carbon black as absorbing layer with each thickness of 1 mm) structure showed the best microwave absorption performance in which more than 99% microwave energy were absorbed, with promising minimum reflection loss of −24.0 dB, along with a wider bandwidth of 4.8 GHz and yet with a reduced thickness of only 2 mm.

Synthesis of Polyaniline in Seawater

To date, polyaniline (PANI) has been synthesized in pure water. Aside from this, the application of PANI as a conducting polymer could be extended if it can be effectively synthesized in seawater, which constitutes 70% of the surface of the Earth. The production of functional plastics using natural resources without any additional purification would improve industrial production and enhance the comfort associated with our daily life. However, no examples of the effective application of seawater to PANI synthesis have been reported. Herein, PANI with an electrical conductivity of ~10⁻² S/cm was synthesized in seawater as the reaction solvent. The electron spin resonance measurements confirmed the role of the polarons of PANI as charge carriers. In addition, a PANI/silk composite was prepared in seawater to produce a conducting cloth for further applications. The performance of the PANI prepared in seawater as the solvent was comparable to that of the PANI prepared in pure water. Thus, the proposed method allowed for the production of the conducting polymer via a convenient and low-cost method. This is the first study to report the usage of seawater as an abundant natural resource for synthesizing conducting polymers, promoting their wide application.

Broadband microwave absorber constructed by reduced graphene oxide/La0.7Sr0.3MnO3 composites

High-performance microwave absorbing materials require optimized impedance matching and high attenuation ability. Here we meet the challenge by incorporating electric loss with magnetic loss materials to prepare carbon-based/magnetic hybrids. The reduced graphene oxide (rGO)/La0.7Sr0.3MnO3 (LSMO) composites were prepared by dispersing the LSMO powders into 4.25, 6.25, 8.16, and 10 wt% of the graphene oxide aqueous solution, then the rGO/LSMO composites were formed by hydrothermal method. The pure rGO, LSMO, and rGO/LSMO composites were studied using X-ray diffraction and SEM. Microwave absorption properties were investigated by using coin method. Simulation studies show that 6.25 wt% of rGO/LSMO in a wax matrix exhibits the strongest reflection loss of -47.9 dB @ 10.7 GHz at a thickness of 2.5 mm. Moreover, the effective absorption bandwidth with the reflection loss below -10 dB is up to 14.5 GHz, ranged from 3.5 to 18 GHz for the composites with a thickness of 1.5-5.5 mm, due to a synergism between dielectric loss of rGO and magnetic loss of magnetic LSMO, which is an interesting exploration in the applications of rGO and LSMO. This method can be extended to design and fabricate hybrid absorbers with effective microwave absorption.

Facile Interface Design Strategy for Improving the Uvioresistant and Self-Healing Properties of Poly(p-phenylene benzobisoxazole) Fibers

Graphene-based coaxial hybrid fibers (CHFs) with a typical core-sheath structure have attracted extensive attention in recent years because of their potentially excellent mechanical performance. However, direct introduction of the micrometer-thick graphene stack structure on the extremely inert fiber surface with little negative effect has barely been reported so far and is still a great challenge. In the present work, a facile and cost-efficient dimensionally confined hydrothermal reduction, static adsorption, and thermal-assisted shrinkage sequential treatment strategy was developed to fabricate one-dimensional CHFs. The large-scale reduced graphene oxide-metal organic framework (RGO-UIO-66) hybrid layer and poly(p-phenylene benzobisoxazole) (PBO) fiber serve as the sheath part and core part, respectively, and the final product is denoted as PGU-CHFs. The experimental results confirmed that the prepared monofilament composite with thermoplastic polyurethane (PGU-CHF-TPU) exhibited an excellent and stable intrinsically self-healing efficiency (about 85%) over 5 cycles and an extraordinary uvioresistant performance (increased by 128%) compared to those of pristine PBO fibers after 288 h UV aging irradiation. Moreover, the anti-ultraviolet (UV) properties of PGU-CHFs at 96 h are basically at the optimum level among most of the reported literatures at present after comparison. The highly near-infrared photothermal conversion ability and stability of micrometer-thick RGO stack structure and the synergism of RGO-UIO-66 hybrid sheath layer including UV adsorption, shielding attenuation, and reflection are responsible for the satisfactorily interfacial self-healing efficiency and UV-resistance properties of PGU-CHFs, respectively. Considering the diversities and versatilities of RGO and MOFs, the proposed fabrication strategy will promisingly endow PBO fibers with great application potential in the other fields such as fiber-based sensors and smart fibers.

Poly(pyrrole-co-o-toluidine) wrapped CoFe2O4/R(GO–OXSWCNTs) ternary composite material for Ga3+ sensing ability

A ternary P(Py-co-OT)/CF/R(GO–OXSWCNTs) nanocomposite has been fabricated as a novel conductive hybrid material with high stability and excellent electrochemical Ga³⁺ sensing ability.

Enhanced microwave absorption properties of PMMA modified MnFe2O4–polyaniline nanocomposites

Nanocomposites consisting of polymethyl methacrylate modified MnFe₂O₄ prepared by solution combustion synthesis and polyaniline exhibit enhanced electromagnetic interference (EMI) shielding property.

Microwave absorption properties of reduced graphene oxide strontium hexaferrite/poly(methyl methacrylate) composites

The key factors to consider when designing microwave absorber materials for eradication of electromagnetic (EM) pollution are absorption of incident EM waves and good impedance matching. By keeping these things in mind, flexible microwave absorber composite films can be fabricated by simple gel casting techniques using reduced graphene oxide (RGO) and strontium ferrite (SF) in a poly(methyl methacrylate) (PMMA) matrix. SF nanoparticles are synthesized by the well known sol-gel method. Subsequently, reduced graphene oxide (RGO) and SF nanocomposite (RGOSF) are prepared through a chemical reduction method using hydrazine. The structure, morphology, chemical composition, thermal stability and magnetic properties of the nanocomposite are characterized in detail by various techniques. The SF particles are found to be nearly 500 nm and decorated on RGO sheets as revealed by field emission scanning electron microscopy and transmission electron microscopy analysis. Fourier transform infrared and and Raman spectroscopy clearly show the presence of SF in the graphene sheet by the lower peak positions. Finally, ternary polymer composites of RGO/SF/PMMA are prepared by an in situ polymerization method. Magnetic and dielectric studies of the composite reveal that the presence of RGO/SF/PMMA lead to polarization effects contributing to dielectric loss. Also, RGO surrounding SF provides a conductive network in the polymer matrix which is in turn responsible for the magnetic loss in the composite. Thus, the permittivity as well as the permeability of the composite can be controlled by an appropriate combination of RGO and SF in PMMA. More than 99% absorption efficiency is achieved by a suitable combination of magneto-dielectric coupling in the X-band frequency range by incorporating 9 wt% of RGO and 1 wt% of SF in the polymer matrix.

The Fabrication and High-Efficiency Electromagnetic Wave Absorption Performance of CoFe/C Core-Shell Structured Nanocomposites

CoFe/C core-shell structured nanocomposites (CoFe@C) have been fabricated through the thermal decomposition of acetylene with CoFe2O4 as precursor. The as-prepared CoFe@C was characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, transmission electron microscopy, and thermogravimetric analysis. The results demonstrate that the carbon shell in CoFe@C has a poor crystallization with a thickness about 5-30 nm and a content approximately 48.5 wt.%. Due to a good combination between intrinsic magnetic properties and high-electrical conductivity, the CoFe@C exhibits not only excellent absorption intensity but also wide frequency bandwidth. The minimum RL value of CoFe@C can reach - 44 dB at a thickness of 4.0 mm, and RL values below - 10 dB is up to 4.3 GHz at a thickness of 2.5 mm. The present CoFe@C may be a potential candidate for microwave absorption application.

Porous Graphene Microflowers for High-Performance Microwave Absorption

Graphene has shown great potential in microwave absorption (MA) owing to its high surface area, low density, tunable electrical conductivity and good chemical stability. To fully realize graphene's MA ability, the microstructure of graphene should be carefully addressed. Here we prepared graphene microflowers (Gmfs) with highly porous structure for high-performance MA filler material. The efficient absorption bandwidth (reflection loss ≤ -10 dB) reaches 5.59 GHz and the minimum reflection loss is up to -42.9 dB, showing significant increment compared with stacked graphene. Such performance is higher than most graphene-based materials in the literature. Besides, the low filling content (10 wt%) and low density (40-50 mg cm^-3) are beneficial for the practical applications. Without compounding with magnetic materials or conductive polymers, Gmfs show outstanding MA performance with the aid of rational microstructure design. Furthermore, Gmfs exhibit advantages in facile processibility and large-scale production compared with other porous graphene materials including aerogels and foams.

Facile Fabrication of Multi-hierarchical Porous Polyaniline Composite as Pressure Sensor and Gas Sensor with Adjustable Sensitivity

A multi-hierarchical porous polyaniline (PANI) composite which could be used in good performance pressure sensor and adjustable sensitivity gas sensor has been fabricated by a facile in situ polymerization. Commercial grade sponge was utilized as a template scaffold to deposit PANI via in situ polymerization. With abundant interconnected pores throughout the whole structure, the sponge provided sufficient surface for the growth of PANI nanobranches. The flexible porous structure helped the composite to show high performance in pressure detection with fast response and favorable recoverability and gas detection with adjustable sensitivity. The sensing mechanism of the PANI/sponge-based flexible sensor has also been discussed. The results indicate that this work provides a feasible approach to fabricate efficient sensors with advantages of low cost, facile preparation, and easy signal collection.

Recent Advances in Conjugated Polymer-Based Microwave Absorbing Materials

Microwave absorbing materials (MAMs) are paving the way for exciting applications in electromagnetic (EM) pollution precaution and national defense security, as they offer an advanced alternative to conventional reflection principles to fundamentally eliminate the EM waves. Conjugated polymer (CP)-based composites appear as a promising kind of MAM with the desirable features of low density and high performance. In this review, we introduce the theory of microwave absorption and summarize recent advances in the fabrication of CP-based MAMs, including rational design of the microstructure of pure conjugated polymers and tunable chemical integration with magnetic ferrites, magnetic metals, transition metal oxides, and carbon materials. The key point of enhancing microwave absorption in CP-based MAMs is to regulate their EM properties, improve matching of characteristic impedance, and create diversified loss mechanisms. The examples presented in this review will provide new insights into the design and preparation of CP-based composites that can satisfy the high demands of the oncoming generation of MAMs.

Excellent microwave absorption properties by tuned electromagnetic parameters in polyaniline-coated Ba0.9La0.1Fe11.9Ni0.1O19/reduced graphene oxide nanocomposites

The obvious enhancement of microwave absorption performance of Ba_0.9La_0.1Fe_11.9Ni_0.1O₁₉/reduced graphene oxide/polyaniline ternary nanocomposites in 2–18 GHz was observed. The minimum reflection loss can reach −49.1 dB with thickness of 1.9 mm.

One-step in situ synthesis of strontium ferrites and strontium ferrites/graphene composites as microwave absorbing materials

The synergistic effect between graphene and SrFe₁₂O₁₉ assures outstanding absorbing properties.

Three-dimensional reduced graphene oxide powder for efficient microwave absorption in the S-band (2–4 GHz)

Three-dimensional reduced graphene oxide (3D-rGO) powders are synthesized and demonstrate remarkably enhanced microwave absorption in the S-band (2–4 GHz).

Synthesis and excellent visible light photocatalysis performance of magnetic reduced graphene oxide/ZnO/ZnFe2O4 composites

The partial photogenerated electrons from conduction band of ZnFe₂O₄ are transferred to the conduction band of ZnO, oppositely, the photogenerated holes lefted in the valance band of ZnFe₂O₄. The ternary composite has high photocatalytic activity.