Colorimetric Humidity Sensors Based on Electrospun Polyamide/CoCl2 Nanofibrous Membranes

Ultrafast spectroscopic studies on the interaction of reactive oxygen species with a probe impregnated in nanoscopic and microscopic matrix formulation

Reactive oxygen species (ROS) plays important role to maintain homeostasis in living bodies. Here we have studied interaction of ROS generated from hydrogen peroxide (H2O2) with a well-known spectroscopic probe Rose Bengal (RB) encapsulated in nanoscopic sodium dodecyl sulphate (SDS) micelles in aqueous medium and entrapped in microscopic nylon 66 solid matrix generated using electrospinning technique. A detailed spectroscopic characterization of ROS with SDS encapsulated RB (RB-SDS) shows efficient interaction compared to that in bulk medium. The time resolved analysis on the probe based on femtosecond resolved 2D-spectrum time images collected from streak camera reveal the simultaneous existence of an ultrafast electron (∼6 ps) and a hole transfer mechanism (∼93 ps) resulting from generation of hydroxyl radicals through photobleaching of the probe in presence of H2O2. Based on the spectroscopic and time resolved studies of RB in bulk and in restricted (SDS) medium, we have further translated it for the development of an in-field prototype device which utilizes RB as a ROS sensor impregnated in a nylon thin film. The microscopic nylon solid matrix characterized by scanning electron microscope (SEM) shows porous structure for holding sample containing ROS. Our study quantitatively measures the amount of ROS by using RB embedded microfiber membrane. Thus, our developed prototype device based on RB embedded on the nylon matrix would be beneficial for the potential use in quantification of ROS in extracellular fluids and food materials.

Moisture-Adaptive Contractile Biopolymer-Derived Fibers for Wound Healing Promotion

The advancement in thermosensitive active hydrogels has opened promising opportunities to dynamic full-thickness skin wound healing. However, conventional hydrogels lack breathability to avoid wound infection and cannot adapt to wounds with different shapes due to the isotropic contraction. Herein, a moisture-adaptive fiber that rapidly absorbs wound tissue fluid and produces a large lengthwise contractile force during the drying process is reported. The incorporation of hydroxyl-rich silica nanoparticles in the sodium alginate/gelatin composite fiber greatly improves the hydrophilicity, toughness, and axial contraction performance of the fiber. This fiber exhibits a dynamic contractile behavior as a function of humidity, generating ≈15% maximum contraction strain or ≈24 MPa maximum isometric contractile stress. The textile knitted by the fibers features excellent breathability and generates adaptive contraction in the target direction during the natural desorption of tissue fluid from the wounds. In vivo animal experiments further demonstrate the advantages of the textiles over traditional dressings in accelerating wound healing.

"Enzyme-Like" Spatially Fixed Polyhydroxyl Microenvironment-Activated Hydrochromic Molecular Switching for Naked Eye Detection of ppm Level Humidity

The detection and monitoring of ultralow humidity (<100 ppm) are critical in many important industries, such as high-tech manufacturing, scientific research, and aerospace. However, the development of ppm level humidity sensors with portability, low cost, and ease of regeneration remains a significant challenge. Herein, an innovative "enzyme-like" construction strategy is proposed to address this problem by employing suitable molecular-level humidity-sensitive units and chemically constructing a multilevel spatial synergistic sensitization microenvironment around it. The as-prepared ultralow humidity-sensitive paper (UHSP) achieved a naked eye recognition humidity of 0.01-100 ppm. UHSP not only is simple to prepare, handy and low-cost, but can also be simply and efficiently regenerated as well as recycled many times by skillfully utilizing the "unconventional sublimation" and "lime slaked" of calcium oxide. The molecular reaction mechanisms involved in the humidity response and regeneration of UHSP have been demonstrated in detail. UHSP can provide a promising new method for ultralow humidity detection in the form of portable kits or sirens. The demonstrated "enzyme-like" construction strategy can bring unlimited ideas and implications to the design and development of sensors with tunable response thresholds, particularly high sensitivity.

Biodegradable, three-dimensional colorimetric fliers for environmental monitoring

Recently reported winged microelectronic systems offer passive flight mechanisms as a dispersal strategy for purposes in environmental monitoring, population surveillance, pathogen tracking, and other applications. Initial studies indicate potential for technologies of this type, but advances in structural and responsive materials and in aerodynamically optimized geometries are necessary to improve the functionality and expand the modes of operation. Here, we introduce environmentally degradable materials as the basis of 3D fliers that allow remote, colorimetric assessments of multiple environmental parameters-pH, heavy metal concentrations, and ultraviolet exposure, along with humidity levels and temperature. Experimental and theoretical investigations of the aerodynamics of these systems reveal design considerations that include not only the geometries of the structures but also their mass distributions across a range of bioinspired designs. Preliminary field studies that rely on drones for deployment and for remote colorimetric analysis by machine learning interpretation of digital images illustrate scenarios for practical use.

Optical humidity sensors based on lead-free Cu-based perovskite nanomaterials

Organometallic halide perovskite materials possess unique and tunable optical properties with a wide range of optoelectronic applications. However, these materials suffer from humidity-driven degradation in ambient atmospheres. In this paper we investigate stable copper-based perovskite nanocrystals for potential use in humidity sensors, specifically examining their unique humidity-dependent optical properties and reversibility. We controlled stoichiometric ratios of Cu-based perovskites and demonstrated that (methylammonium)₂CuBr₄ nanocrystals showed excellent reversible physisorption of water molecules. These perovskite nanocrystals exhibited reversible hydro-optical properties, including transparency changes in response to variations in relative humidity under ambient conditions. The perovskite nanomaterial humidity sensor was highly reliable and stable, with a linear correlation in a relative humidity range of 7% to 98%. Accordingly, the lead-free Cu-based perovskite materials developed herein have the potential to be employed as real-time, self-consistent humidity sensors.

An inorganic Co-containing heteropolyoxoniobate: reversible chemochromism and H2O-dependent proton conductivity properties

A novel pure inorganic cobalt-containing heteropolyoxoniobate is constructed from crescent-shaped [SiNb18O54]14− units. It exhibits reversible chemochromism, H2O-dependent proton conductivity, water vapor adsorption and magnetic properties.

Silver-loaded carbon nanofibers for ammonia sensing

Carbon nanofibers (CNFs) were prepared by electrospinning, and silver (Ag) ions were grown on the surface of the CNFs by in situ solution synthesis. The structure and morphology of obtained Ag-doped CNFs (Ag-CNFs) were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The gas sensibility of the composite fiber was investigated by ammonia (NH3) obtained by natural volatilization from 1 to 4 mL of NH3 solution at room temperature. It was found that the fibers exhibited a sensitive current corresponding to different NH3 concentrations and a greater response at high concentrations. The sensing mechanism was discussed, and the good absorptivity was demonstrated. The results show that Ag-CNF is a promising material for the detection of toxic NH3.

The Influence of Co Additive on the Sintering, Mechanical Properties, Cytocompatibility, and Digital Light Processing Based Stereolithography of 3Y-TZP-5Al2O3 Ceramics

Nanocrystalline 3 mol% yttria-tetragonal zirconia polycrystal (3Y-TZP) ceramic powder containing 5 wt.% Al₂O₃ with 64 m²/g specific area was synthesized through precipitation method. Different amounts of Co (0-3 mol%) were introduced into synthesized powders, and ceramic materials were obtained by heat treatment in the air for 2 h at 1350-1550 °C. The influence of Co addition on the sintering temperature, phase composition, microstructure, mechanical and biomedical properties of the obtained composite materials, and on the resolution of the digital light processing (DLP) printed and sintered ceramic samples was investigated. The addition of a low amount of Co (0.33 mol%) allows us to decrease the sintering temperature, to improve the mechanical properties of ceramics, to preserve the nanoscale size of grains at 1350-1400 °C. The further increase of Co concentration resulted in the formation of both substitutional and interstitial sites in solid solution and appearance of CoAl₂O₄ confirmed by UV-visible spectroscopy, which stimulates grain growth. Due to the prevention of enlarging grains and to the formation of the dense microstructure in ceramic based on the tetragonal ZrO₂ and Al₂O₃ with 0.33 mol% Co the bending strength of 720 ± 33 MPa was obtained after sintering at 1400 °C. The obtained materials demonstrated the absence of cytotoxicity and good cytocompatibility. The formation of blue CoAl₂O₄ allows us to improve the resolution of DLP based stereolithographic printed green bodies and sintered samples of the ceramics based on ZrO₂-Al₂O₃. The developed materials and technology could be the basis for 3D manufacturing of bioceramic implants for medicine.

Advances in portable electrospinning devices for in situ delivery of personalized wound care

Electrospinning and electrospun fibrous assemblies have attracted interest in a variety of biomedical fields including woundcare, tissue engineering and drug delivery, due to the large surface-area-to-volume ratio and high porosity of nanofibrous webs. Normally, wound dressings are manufactured well before the point of care, and then packaged and distributed for use at a later stage. More recently, in situ electrospinning of fibers directly onto wound sites has been proposed as a route to personalized wound dressing manufacture, tailored to the needs of individual patients. Practically, in situ deposition of nanofibers on to a wound could be envisaged using a portable or hand-held electrospinning device that is safe and easy to operate. This review focuses on recent advances in portable electrospinning technology and potential applications in woundcare and regenerative medicine. The main research challenges and future trends are also considered.

Cu-nanoflower decorated gold nanoparticles-graphene oxide nanofiber as electrochemical biosensor for glucose detection

A novel electrospinning approach is proposed for the fabrication of copper (Cu)-nanoflower decorated gold nanoparticles (AuNPs)-graphene oxide (GO) nanofiber (NF) as an electrochemical biosensor for the glucose detection. In this study, GO was mixed with poly(vinyl alcohol) (PVA) and used as a fiber precursor, which greatly improves the electrochemical properties. The above solution was uniformly coated onto the surfaces of gold chip to form GO NFs via electrospinning. AuNPs were coated onto the surface of GO NFs and then incorporated organic-inorganic hybrid nanoflower [Cu nanoflower-glucose oxidase (GOx) and horseradish peroxidase (HRP)]. The electrochemical experiments revealed that Cu-nanoflower@AuNPs-GO NFs exhibited outstanding electrochemical catalytic nature, and selectivity for the conversion of glucose to gluconic acid in the presence of GOx-HRP-Cu nanoflower. The Cu-nanoflower@AuNPs-GO NFs coated Au chip exhibited good linear range 0.001-0.1 mM, with a detection limit of 0.018 μM. The Cu-nanoflower@AuNPs-GO NFs modified Au chip exhibited higher catalytic properties, which are attributed to the coating of unique organic-inorganic nanostructured materials on the surfaces of Au chip. These results indicate that the nano-bio hybrid materials can be applied as a promising electrochemical biosensor to monitor glucose levels in biofluids.

Humidity-Driven Soft Actuator Built up Layer-by-Layer and Theoretical Insight into Its Mechanism of Energy Conversion

An improved protocol is proposed for preparation of a humidity-sensitive soft actuator through the layer-by-layer assembling of weight-ratio-variable composites of sodium alginate (SA) and poly(vinyl alcohol) (PVA) into laminated structures. The design induces nonuniform hygroscopicity in the thickness direction and gives rise to strong interfacial interaction between layers, making the actuator have directional motility. A mathematical model reveals that the directional motion is driven by the chemical potential of humidity, and its energy conversion efficiency from humidity to mechanical work reaches 81.2% at 25 °C. By coating with CoCl₂, the composite film of SA@PVA/CoCl₂ can act as a warning sign that provides reminder information to prevent people from slipping or falling by a conspicuous red sign during a high-humidity environment. When the film is involved in a bidirectional switch, it is capable of turning on/off light-emitting diodes by humidity, showing promising potential in control over humidity-dependent devices.