Efficient genomic prediction based on whole-genome sequence data using split-and-merge Bayesian variable selection

GWABLUP: genome-wide association assisted best linear unbiased prediction of genetic values

BACKGROUND

Since the very beginning of genomic selection, researchers investigated methods that improved upon SNP-BLUP (single nucleotide polymorphism best linear unbiased prediction). SNP-BLUP gives equal weight to all SNPs, whereas it is expected that many SNPs are not near causal variants and thus do not have substantial effects. A recent approach to remedy this is to use genome-wide association study (GWAS) findings and increase the weights of GWAS-top-SNPs in genomic predictions. Here, we employ a genome-wide approach to integrate GWAS results into genomic prediction, called GWABLUP.

RESULTS

GWABLUP consists of the following steps: (1) performing a GWAS in the training data which results in likelihood ratios; (2) smoothing the likelihood ratios over the SNPs; (3) combining the smoothed likelihood ratio with the prior probability of SNPs having non-zero effects, which yields the posterior probability of the SNPs; (4) calculating a weighted genomic relationship matrix using the posterior probabilities as weights; and (5) performing genomic prediction using the weighted genomic relationship matrix. Using high-density genotypes and milk, fat, protein and somatic cell count phenotypes on dairy cows, GWABLUP was compared to GBLUP, GBLUP (topSNPs) with extra weights for GWAS top-SNPs, and BayesGC, i.e. a Bayesian variable selection model. The GWAS resulted in six, five, four, and three genome-wide significant peaks for milk, fat and protein yield and somatic cell count, respectively. GWABLUP genomic predictions were 10, 6, 7 and 1% more reliable than those of GBLUP for milk, fat and protein yield and somatic cell count, respectively. It was also more reliable than GBLUP (topSNPs) for all four traits, and more reliable than BayesGC for three of the traits. Although GWABLUP showed a tendency towards inflation bias for three of the traits, this was not statistically significant. In a multitrait analysis, GWABLUP yielded the highest accuracy for two of the traits. However, for SCC, which was relatively unrelated to the yield traits, including yield trait GWAS-results reduced the reliability compared to a single trait analysis.

CONCLUSIONS

GWABLUP uses GWAS results to differentially weigh all the SNPs in a weighted GBLUP genomic prediction analysis. GWABLUP yielded up to 10% and 13% more reliable genomic predictions than GBLUP for single and multitrait analyses, respectively. Extension of GWABLUP to single-step analyses is straightforward.

Genomic prediction based on selective linkage disequilibrium pruning of low-coverage whole-genome sequence variants in a pure Duroc population

BACKGROUND

Although the accumulation of whole-genome sequencing (WGS) data has accelerated the identification of mutations underlying complex traits, its impact on the accuracy of genomic predictions is limited. Reliable genotyping data and pre-selected beneficial loci can be used to improve prediction accuracy. Previously, we reported a low-coverage sequencing genotyping method that yielded 11.3 million highly accurate single-nucleotide polymorphisms (SNPs) in pigs. Here, we introduce a method termed selective linkage disequilibrium pruning (SLDP), which refines the set of SNPs that show a large gain during prediction of complex traits using whole-genome SNP data.

RESULTS

We used the SLDP method to identify and select markers among millions of SNPs based on genome-wide association study (GWAS) prior information. We evaluated the performance of SLDP with respect to three real traits and six simulated traits with varying genetic architectures using two representative models (genomic best linear unbiased prediction and BayesR) on samples from 3579 Duroc boars. SLDP was determined by testing 180 combinations of two core parameters (GWAS P-value thresholds and linkage disequilibrium r2). The parameters for each trait were optimized in the training population by five fold cross-validation and then tested in the validation population. Similar to previous GWAS prior-based methods, the performance of SLDP was mainly affected by the genetic architecture of the traits analyzed. Specifically, SLDP performed better for traits controlled by major quantitative trait loci (QTL) or a small number of quantitative trait nucleotides (QTN). Compared with two commercial SNP chips, genotyping-by-sequencing data, and an unselected whole-genome SNP panel, the SLDP strategy led to significant improvements in prediction accuracy, which ranged from 0.84 to 3.22% for real traits controlled by major or moderate QTL and from 1.23 to 11.47% for simulated traits controlled by a small number of QTN.

CONCLUSIONS

The SLDP marker selection method can be incorporated into mainstream prediction models to yield accuracy improvements for traits with a relatively simple genetic architecture, however, it has no significant advantage for traits not controlled by major QTL. The main factors that affect its performance are the genetic architecture of traits and the reliability of GWAS prior information. Our findings can facilitate the application of WGS-based genomic selection.

Utilizing Variants Identified with Multiple Genome-Wide Association Study Methods Optimizes Genomic Selection for Growth Traits in Pigs

Improving the prediction accuracies of economically important traits in genomic selection (GS) is a main objective for researchers and breeders in the livestock industry. This study aims at utilizing potentially functional SNPs and QTLs identified with various genome-wide association study (GWAS) models in GS of pig growth traits. We used three well-established GWAS methods, including the mixed linear model, Bayesian model and meta-analysis, as well as 60K SNP-chip and whole genome sequence (WGS) data from 1734 Yorkshire and 1123 Landrace pigs to detect SNPs related to four growth traits: average daily gain, backfat thickness, body weight and birth weight. A total of 1485 significant loci and 24 candidate genes which are involved in skeletal muscle development, fatty deposition, lipid metabolism and insulin resistance were identified. Compared with using all SNP-chip data, GS with the pre-selected functional SNPs in the standard genomic best linear unbiased prediction (GBLUP), and a two-kernel based GBLUP model yielded average gains in accuracy by 4 to 46% (from 0.19 ± 0.07 to 0.56 ± 0.07) and 5 to 27% (from 0.16 ± 0.06 to 0.57 ± 0.05) for the four traits, respectively, suggesting that the prioritization of preselected functional markers in GS models had the potential to improve prediction accuracies for certain traits in livestock breeding.

Genomic prediction with whole-genome sequence data in intensely selected pig lines

Background

Early simulations indicated that whole-genome sequence data (WGS) could improve the accuracy of genomic predictions within and across breeds. However, empirical results have been ambiguous so far. Large datasets that capture most of the genomic diversity in a population must be assembled so that allele substitution effects are estimated with high accuracy. The objectives of this study were to use a large pig dataset from seven intensely selected lines to assess the benefits of using WGS for genomic prediction compared to using commercial marker arrays and to identify scenarios in which WGS provides the largest advantage.

Methods

We sequenced 6931 individuals from seven commercial pig lines with different numerical sizes. Genotypes of 32.8 million variants were imputed for 396,100 individuals (17,224 to 104,661 per line). We used BayesR to perform genomic prediction for eight complex traits. Genomic predictions were performed using either data from a standard marker array or variants preselected from WGS based on association tests.

Results

The accuracies of genomic predictions based on preselected WGS variants were not robust across traits and lines and the improvements in prediction accuracy that we achieved so far with WGS compared to standard marker arrays were generally small. The most favourable results for WGS were obtained when the largest training sets were available and standard marker arrays were augmented with preselected variants with statistically significant associations to the trait. With this method and training sets of around 80k individuals, the accuracy of within-line genomic predictions was on average improved by 0.025. With multi-line training sets, improvements of 0.04 compared to marker arrays could be expected.

Conclusions

Our results showed that WGS has limited potential to improve the accuracy of genomic predictions compared to marker arrays in intensely selected pig lines. Thus, although we expect that larger improvements in accuracy from the use of WGS are possible with a combination of larger training sets and optimised pipelines for generating and analysing such datasets, the use of WGS in the current implementations of genomic prediction should be carefully evaluated against the cost of large-scale WGS data on a case-by-case basis.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12711-022-00756-0.

Evaluation of Whole-Genome Sequence Imputation Strategies in Korean Hanwoo Cattle

Simple Summary

In this study, we evaluated various imputation strategies for the Korean Hanwoo cattle. We observed that a large reference panel consisting of many cattle breeds did not improve the imputation accuracy when compared to a proportionally small purebred Hanwoo reference. This was because the multi-breed reference did not contain animals sufficiently related to the Hanwoo to improve the accuracies and, although not detrimental, in effect, only added to the computational burden of the imputation. Despite the large multi-breed reference, when the Hanwoo were removed from the reference, the imputation accuracies were low. These results suggest additional sequencing efforts are needed for underrepresented breeds, particularly those less genetically related to the main European breeds.

Abstract

This study evaluated the accuracy of sequence imputation in Hanwoo beef cattle using different reference panels: a large multi-breed reference with no Hanwoo (n = 6269), a much smaller Hanwoo purebred reference (n = 88), and both datasets combined (n = 6357). The target animals were 136 cattle both sequenced and genotyped with the Illumina BovineSNP50 v2 (50K). The average imputation accuracy measured by the Pearson correlation (R) was 0.695 with the multi-breed reference, 0.876 with the purebred Hanwoo, and 0.887 with the combined data; the average concordance rates (CR) were 88.16%, 94.49%, and 94.84%, respectively. The accuracy gains from adding a large multi-breed reference of 6269 samples to only 88 Hanwoo was marginal; however, the concordance rate for the heterozygotes decreased from 85% to 82%, and the concordance rate for fixed SNPs in Hanwoo also decreased from 99.98% to 98.73%. Although the multi-breed panel was large, it was not sufficiently representative of the breed for accurate imputation without the Hanwoo animals. Additionally, we evaluated the value of high-density 700K genotypes (n = 991) as an intermediary step in the imputation process. The imputation accuracy differences were negligible between a single-step imputation strategy from 50K directly to sequence and a two-step imputation approach (50K-700K-sequence). We also observed that imputed sequence data can be used as a reference panel for imputation (mean R = 0.9650, mean CR = 98.35%). Finally, we identified 31 poorly imputed genomic regions in the Hanwoo genome and demonstrated that imputation accuracies were particularly lower at the chromosomal ends.

Association Studies and Genomic Prediction for Genetic Improvements in Agriculture

To feed the fast growing global population with sufficient food using limited global resources, it is urgent to develop and utilize cutting-edge technologies and improve efficiency of agricultural production. In this review, we specifically introduce the concepts, theories, methods, applications and future implications of association studies and predicting unknown genetic value or future phenotypic events using genomics in the area of breeding in agriculture. Genome wide association studies can identify the quantitative genetic loci associated with phenotypes of importance in agriculture, while genomic prediction utilizes individual genetic value to rank selection candidates to improve the next generation of plants or animals. These technologies and methods have improved the efficiency of genetic improvement programs for agricultural production via elite animal breeds and plant varieties. With the development of new data acquisition technologies, there will be more and more data collected from high-through-put technologies to assist agricultural breeding. It will be crucial to extract useful information among these large amounts of data and to face this challenge, more efficient algorithms need to be developed and utilized for analyzing these data. Such development will require knowledge from multiple disciplines of research.

Functionally prioritised whole-genome sequence variants improve the accuracy of genomic prediction for heat tolerance

BACKGROUND

Heat tolerance is a trait of economic importance in the context of warm climates and the effects of global warming on livestock production, reproduction, health, and well-being. This study investigated the improvement in prediction accuracy for heat tolerance when selected sets of sequence variants from a large genome-wide association study (GWAS) were combined with a standard 50k single nucleotide polymorphism (SNP) panel used by the dairy industry.

METHODS

Over 40,000 dairy cattle with genotype and phenotype data were analysed. The phenotypes used to measure an individual's heat tolerance were defined as the rate of decline in milk production traits with rising temperature and humidity. We used Holstein and Jersey cows to select sequence variants linked to heat tolerance. The prioritised sequence variants were the most significant SNPs passing a GWAS p-value threshold selected based on sliding 100-kb windows along each chromosome. We used a bull reference set to develop the genomic prediction equations, which were then validated in an independent set of Holstein, Jersey, and crossbred cows. Prediction analyses were performed using the BayesR, BayesRC, and GBLUP methods.

RESULTS

The accuracy of genomic prediction for heat tolerance improved by up to 0.07, 0.05, and 0.10 units in Holstein, Jersey, and crossbred cows, respectively, when sets of selected sequence markers from Holstein cows were added to the 50k SNP panel. However, in some scenarios, the prediction accuracy decreased unexpectedly with the largest drop of - 0.10 units for the heat tolerance fat yield trait observed in Jersey cows when 50k plus pre-selected SNPs from Holstein cows were used. Using pre-selected SNPs discovered on a combined set of Holstein and Jersey cows generally improved the accuracy, especially in the Jersey validation. In addition, combining Holstein and Jersey bulls in the reference set generally improved prediction accuracy in most scenarios compared to using only Holstein bulls as the reference set.

CONCLUSIONS

Informative sequence markers can be prioritised to improve the genomic prediction of heat tolerance in different breeds. In addition to providing biological insight, these variants could also have a direct application for developing customized SNP arrays or can be used via imputation in current industry SNP panels.

Dissection of the impact of prioritized QTL-linked and -unlinked SNP markers on the accuracy of genomic selection1

Background

Use of genomic information has resulted in an undeniable improvement in prediction accuracies and an increase in genetic gain in animal and plant genetic selection programs in spite of oversimplified assumptions about the true biological processes. Even for complex traits, a large portion of markers do not segregate with or effectively track genomic regions contributing to trait variation; yet it is not clear how genomic prediction accuracies are impacted by such potentially nonrelevant markers. In this study, a simulation was carried out to evaluate genomic predictions in the presence of markers unlinked with trait-relevant QTL. Further, we compared the ability of the population statistic F_ST and absolute estimated marker effect as preselection statistics to discriminate between linked and unlinked markers and the corresponding impact on accuracy.

Results

We found that the accuracy of genomic predictions decreased as the proportion of unlinked markers used to calculate the genomic relationships increased. Using all, only linked, and only unlinked marker sets yielded prediction accuracies of 0.62, 0.89, and 0.22, respectively. Furthermore, it was found that prediction accuracies are severely impacted by unlinked markers with large spurious associations. F_ST-preselected marker sets of 10 k and larger yielded accuracies 8.97 to 17.91% higher than those achieved using preselection by absolute estimated marker effects, despite selecting 5.1 to 37.7% more unlinked markers and explaining 2.4 to 5.0% less of the genetic variance. This was attributed to false positives selected by absolute estimated marker effects having a larger spurious association with the trait of interest and more negative impact on predictions. The Pearson correlation between F_ST scores and absolute estimated marker effects was 0.77 and 0.27 among only linked and only unlinked markers, respectively. The sensitivity of F_ST scores to detect truly linked markers is comparable to absolute estimated marker effects but the consistency between the two statistics regarding false positives is weak.

Conclusion

Identification and exclusion of markers that have little to no relevance to the trait of interest may significantly increase genomic prediction accuracies. The population statistic F_ST presents an efficient and effective tool for preselection of trait-relevant markers.

Validation of the Prediction Accuracy for 13 Traits in Chinese Simmental Beef Cattle Using a Preselected Low-Density SNP Panel

Simple Summary

To reduce the breeding costs and promote the application of genomic selection (GS) in Chinese Simmental beef cattle, we developed a customized low-density single-nucleotide polymorphism (SNP) panel consisting of 30,684 SNPs. When comparing the predictive performance of the low-density SNP panel to that of the BovineHD Beadchip for 13 traits, we found that this ~30 K panel achieved moderate to high prediction accuracies for most traits, while reducing the prediction accuracies of six traits by 0.04–0.09 and decreasing the prediction accuracy of one trait by 0.2. For the remaining six traits, the usage of the low-density SNP panel was associated with a slight increase in prediction accuracy. Our studies suggested that the low-density SNP panel (~30 K) is a feasible and promising tool for cost-effective genomic prediction in Chinese Simmental beef cattle, which may provide breeding organizations with a cheaper option and greater returns on investment.

Abstract

Chinese Simmental beef cattle play a key role in the Chinese beef industry due to their great adaptability and marketability. To achieve efficient genetic gain at a low breeding cost, it is crucial to develop a customized cost-effective low-density SNP panel for this cattle population. Thirteen growth, carcass, and meat quality traits and a BovineHD Beadchip genotyping of 1346 individuals were used to select trait-associated variants and variants contributing to great genetic variance. In addition, highly informative SNPs with high MAF in each 500 kb sliding window and in each genic region were also included separately. A low-density SNP panel consisting of 30,684 SNPs was developed, with an imputation accuracy of 97.4% when imputed to the 770 K level. Among 13 traits, the average prediction accuracy levels evaluated by genomic best linear unbiased prediction (GBLUP) and BayesA/B/Cπ were 0.22–0.47 and 0.18–0.60 for the ~30 K array and BovineHD Beadchip, respectively. Generally, the predictive performance of the ~30 K array was trait-dependent, with reduced prediction accuracies for seven traits. While differences in terms of prediction accuracy were observed among the 13 traits, the low-density SNP panel achieved moderate to high accuracies for most of the traits and even improved the accuracies for some traits.

Increased accuracy of genomic predictions for growth under chronic thermal stress in rainbow trout by prioritizing variants from GWAS using imputed sequence data

Through imputation of genotypes, genome‐wide association study (GWAS) and genomic prediction (GP) using whole‐genome sequencing (WGS) data are cost‐efficient and feasible in aquaculture breeding schemes. The objective was to dissect the genetic architecture of growth traits under chronic heat stress in rainbow trout (Oncorhynchus mykiss) and to assess the accuracy of GP based on imputed WGS and different preselected single nucleotide polymorphism (SNP) arrays. A total of 192 and 764 fish challenged to a heat stress experiment for 62 days were genotyped using a customized 1 K and 26 K SNP panels, respectively, and then, genotype imputation was performed from a low‐density chip to WGS using 102 parents (36 males and 66 females) as the reference population. Imputed WGS data were used to perform GWAS and test GP accuracy under different preselected SNP scenarios. Heritability was estimated for body weight (BW), body length (BL) and average daily gain (ADG). Estimates using imputed WGS data ranged from 0.33 ± 0.05 to 0.55 ± 0.05 for growth traits under chronic heat stress. GWAS revealed that the top five cumulatively SNPs explained a maximum of 0.94%, 0.86% and 0.51% of genetic variance for BW, BL and ADG, respectively. Some important functional candidate genes associated with growth‐related traits were found among the most important SNPs, including signal transducer and activator of transcription 5B and 3 (STAT5B and STAT3, respectively) and cytokine‐inducible SH2‐containing protein (CISH). WGS data resulted in a slight increase in prediction accuracy compared with pedigree‐based method, whereas preselected SNPs based on the top GWAS hits improved prediction accuracies, with values ranging from 1.2 to 13.3%. Our results support the evidence of the polygenic nature of growth traits when measured under heat stress. The accuracies of GP can be improved using preselected variants from GWAS, and the use of WGS marginally increases prediction accuracy.

Imputation accuracy to whole-genome sequence in Nellore cattle

BACKGROUND

A cost-effective strategy to explore the complete DNA sequence in animals for genetic evaluation purposes is to sequence key ancestors of a population, followed by imputation mechanisms to infer marker genotypes that were not originally reported in a target population of animals genotyped with single nucleotide polymorphism (SNP) panels. The feasibility of this process relies on the accuracy of the genotype imputation in that population, particularly for potential causal mutations which may be at low frequency and either within genes or regulatory regions. The objective of the present study was to investigate the imputation accuracy to the sequence level in a Nellore beef cattle population, including that for variants in annotation classes which are more likely to be functional.

METHODS

Information of 151 key sequenced Nellore sires were used to assess the imputation accuracy from bovine HD BeadChip SNP (~ 777 k) to whole-genome sequence. The choice of the sires aimed at optimizing the imputation accuracy of a genotypic database, comprised of about 10,000 genotyped Nellore animals. Genotype imputation was performed using two computational approaches: FImpute3 and Minimac4 (after using Eagle for phasing). The accuracy of the imputation was evaluated using a fivefold cross-validation scheme and measured by the squared correlation between observed and imputed genotypes, calculated by individual and by SNP. SNPs were classified into a range of annotations, and the accuracy of imputation within each annotation classification was also evaluated.

RESULTS

High average imputation accuracies per animal were achieved using both FImpute3 (0.94) and Minimac4 (0.95). On average, common variants (minor allele frequency (MAF) > 0.03) were more accurately imputed by Minimac4 and low-frequency variants (MAF ≤ 0.03) were more accurately imputed by FImpute3. The inherent Minimac4 Rsq imputation quality statistic appears to be a good indicator of the empirical Minimac4 imputation accuracy. Both software provided high average SNP-wise imputation accuracy for all classes of biological annotations.

CONCLUSIONS

Our results indicate that imputation to whole-genome sequence is feasible in Nellore beef cattle since high imputation accuracies per individual are expected. SNP-wise imputation accuracy is software-dependent, especially for rare variants. The accuracy of imputation appears to be relatively independent of annotation classification.

Integration of single nucleotide variants and whole-genome DNA methylation profiles for classification of rheumatoid arthritis cases from controls

This study evaluated the use of multiomics data for classification accuracy of rheumatoid arthritis (RA). Three approaches were used and compared in terms of prediction accuracy: (1) whole-genome prediction (WGP) using SNP marker information only, (2) whole-methylome prediction (WMP) using methylation profiles only, and (3) whole-genome/methylome prediction (WGMP) with combining both omics layers. The number of SNP and of methylation sites varied in each scenario, with either 1, 10, or 50% of these preselected based on four approaches: randomly, evenly spaced, lowest p value (genome-wide association or epigenome-wide association study), and estimated effect size using a Bayesian ridge regression (BRR) model. To remove effects of high levels of pairwise linkage disequilibrium (LD), SNPs were also preselected with an LD-pruning method. Five Bayesian regression models were studied for classification, including BRR, Bayes-A, Bayes-B, Bayes-C, and the Bayesian LASSO. Adjusting methylation profiles for cellular heterogeneity within whole blood samples had a detrimental effect on the classification ability of the models. Overall, WGMP using Bayes-B model has the best performance. In particular, selecting SNPs based on LD-pruning with 1% of the methylation sites selected based on BRR included in the model, and fitting the most significant SNP as a fixed effect was the best method for predicting disease risk with a classification accuracy of 0.975. Our results showed that multiomics data can be used to effectively predict the risk of RA and identify cases in early stages to prevent or alter disease progression via appropriate interventions.

Genomic prediction based on selected variants from imputed whole-genome sequence data in Australian sheep populations

Background

Whole-genome sequence (WGS) data could contain information on genetic variants at or in high linkage disequilibrium with causative mutations that underlie the genetic variation of polygenic traits. Thus far, genomic prediction accuracy has shown limited increase when using such information in dairy cattle studies, in which one or few breeds with limited diversity predominate. The objective of our study was to evaluate the accuracy of genomic prediction in a multi-breed Australian sheep population of relatively less related target individuals, when using information on imputed WGS genotypes.

Methods

Between 9626 and 26,657 animals with phenotypes were available for nine economically important sheep production traits and all had WGS imputed genotypes. About 30% of the data were used to discover predictive single nucleotide polymorphism (SNPs) based on a genome-wide association study (GWAS) and the remaining data were used for training and validation of genomic prediction. Prediction accuracy using selected variants from imputed sequence data was compared to that using a standard array of 50k SNP genotypes, thereby comparing genomic best linear prediction (GBLUP) and Bayesian methods (BayesR/BayesRC). Accuracy of genomic prediction was evaluated in two independent populations that were each lowly related to the training set, one being purebred Merino and the other crossbred Border Leicester x Merino sheep.

Results

A substantial improvement in prediction accuracy was observed when selected sequence variants were fitted alongside 50k genotypes as a separate variance component in GBLUP (2GBLUP) or in Bayesian analysis as a separate category of SNPs (BayesRC). From an average accuracy of 0.27 in both validation sets for the 50k array, the average absolute increase in accuracy across traits with 2GBLUP was 0.083 and 0.073 for purebred and crossbred animals, respectively, whereas with BayesRC it was 0.102 and 0.087. The average gain in accuracy was smaller when selected sequence variants were treated in the same category as 50k SNPs. Very little improvement over 50k prediction was observed when using all WGS variants.

Conclusions

Accuracy of genomic prediction in diverse sheep populations increased substantially by using variants selected from whole-genome sequence data based on an independent multi-breed GWAS, when compared to genomic prediction using standard 50K genotypes.

1000 Bull Genomes Project to Map Simple and Complex Genetic Traits in Cattle: Applications and Outcomes

The 1000 Bull Genomes Project is a collection of whole-genome sequences from 2,703 individuals capturing a significant proportion of the world's cattle diversity. So far, 84 million single-nucleotide polymorphisms (SNPs) and 2.5 million small insertion deletions have been identified in the collection, a very high level of genetic diversity. The project has greatly accelerated the identification of deleterious mutations for a range of genetic diseases, as well as for embryonic lethals. The rate of identification of causal mutations for complex traits has been slower, reflecting the typically small effect size of these mutations and the fact that many are likely in as-yet-unannotated regulatory regions. Both the deleterious mutations that have been identified and the mutations associated with complex trait variation have been included in low-cost SNP array designs, and these arrays are being genotyped in tens of thousands of dairy and beef cattle, enabling management of deleterious mutations in these populations as well as genomic selection.

Using imputation-based whole-genome sequencing data to improve the accuracy of genomic prediction for combined populations in pigs

BACKGROUND

For genomic selection in populations with a small reference population, combining populations of the same breed or populations of related breeds is an effective way to increase the size of the reference population. However, genomic predictions based on single nucleotide polymorphism (SNP)-chip genotype data using combined populations with different genetic backgrounds or from different breeds have not shown a clear advantage over using within-population or within-breed predictions. The increasing availability of whole-genome sequencing (WGS) data provides new opportunities for combined population genomic prediction. Our objective was to investigate the accuracy of genomic prediction using imputation-based WGS data from combined populations in pigs. Using 80K SNP panel genotypes, WGS genotypes, or genotypes on WGS variants that were pruned based on linkage disequilibrium (LD), three methods [genomic best linear unbiased prediction (GBLUP), single-step (ss)GBLUP, and genomic feature (GF)BLUP] were implemented with different prior information to identify the best method to improve the accuracy of genomic prediction for combined populations in pigs.

RESULTS

In total, 2089 and 2043 individuals with production and reproduction phenotypes, respectively, from three Yorkshire populations with different genetic backgrounds were genotyped with the PorcineSNP80 panel. Imputation accuracy from 80K to WGS variants reached 92%. The results showed that use of the WGS data compared to the 80K SNP panel did not increase the accuracy of genomic prediction in a single population, but using WGS data with LD pruning and GFBLUP with prior information did yield higher accuracy than the 80K SNP panel. For the 80K SNP panel genotypes, using the combined population resulted in a slight improvement, no change, or even a slight decrease in accuracy in comparison with the single population for GBLUP and ssGBLUP, while accuracy increased by 1 to 2.4% when using WGS data. Notably, the GFBLUP method did not perform well for both the combined population and the single populations.

CONCLUSIONS

The use of WGS data was beneficial for combined population genomic prediction. Simply increasing the number of SNPs to the WGS level did not increase accuracy for a single population, while using pruned WGS data based on LD and GFBLUP with prior information could yield higher accuracy than the 80K SNP panel.

Applications of the Soil, Plant and Rumen Microbiomes in Pastoral Agriculture

The production of dairy, meat, and fiber by ruminant animals relies on the biological processes occurring in soils, forage plants, and the animals' rumens. Each of these components has an associated microbiome, and these have traditionally been viewed as distinct ecosystems. However, these microbiomes operate under similar ecological principles and are connected via water, energy flows, and the carbon and nitrogen nutrient cycles. Here, we summarize the microbiome research that has been done in each of these three environments (soils, forage plants, animals' rumen) and investigate what additional benefits may be possible through understanding the interactions between the various microbiomes. The challenge for future research is to enhance microbiome function by appropriate matching of plant and animal genotypes with the environment to improve the output and environmental sustainability of pastoral agriculture.

Overlap between eQTL and QTL associated with production traits and fertility in dairy cattle

Background

Identifying causative mutations or genes through which quantitative trait loci (QTL) act has proven very difficult. Using information such as gene expression may help to identify genes and mutations underlying QTL. Our objective was to identify regions associated both with production traits or fertility and with gene expression, in dairy cattle. We used three different approaches to discover QTL that are also expression QTL (eQTL): 1) estimate the correlation between local genomic estimated breeding values (GEBV) and gene expression, 2) investigate whether the 300 intervals explaining most genetic variance for a trait contain more eQTL than 300 randomly selected intervals, and 3) a colocalisation analysis. Phenotypes and genotypes up to sequence level of 35,775 dairy bulls and cows were used for QTL mapping, and gene expression and genotypes of 131 cows were used to identify eQTL.

Results

With all three approaches, we identified some overlap between eQTL and QTL, though the majority of QTL in our dataset did not seem to be eQTL. The most significant associations between QTL and eQTL were found for intervals on chromosome 18, where local GEBV for all traits showed a strong association with the expression of the FUK and DDX19B. Intervals whose local GEBV for a trait correlated highly significantly with the expression of a nearby gene explained only a very small part of the genetic variance for that trait. It is likely that part of these correlations were due to linkage disequilibrium (LD) in the interval. While the 300 intervals explaining most genetic variance explained most of the GEBV variance, they contained only slightly more eQTL than 300 randomly selected intervals that explained a minimal portion of the GEBV variance. Furthermore, some variants showed a high colocalisation probability, but this was only the case for few variants.

Conclusions

Several reasons may have contributed to the low level of overlap between QTL and eQTL detected in our study, including a lack of power in the eQTL study and long-range LD making it difficult to separate QTL and eQTL. Furthermore, it may be that eQTL explain only a small fraction of QTL.

Electronic supplementary material

The online version of this article (10.1186/s12864-019-5656-7) contains supplementary material, which is available to authorized users.

Impact of rare and low-frequency sequence variants on reliability of genomic prediction in dairy cattle

Background

Availability of whole-genome sequence data for a large number of cattle and efficient imputation methodologies open a new opportunity to include rare and low-frequency variants (RLFV) in genomic prediction in dairy cattle. The objective of this study was to examine the impact of including RLFV that are within genes and selected from whole-genome sequence variants, on the reliability of genomic prediction for fertility, health and longevity in dairy cattle.

Results

All genic RLFV with a minor allele frequency lower than 0.05 were extracted from imputed sequence data and subsets were created using different strategies. These subsets were subsequently combined with Illumina 50 k single nucleotide polymorphism (SNP) data and used for genomic prediction. Reliability of prediction obtained by using 50 k SNP data alone was used as reference value and absolute changes in reliabilities are referred to as changes in percentage points. Adding a component that included either all the genic or a subset of selected RLFV into the model in addition to the 50 k component changed the reliability of predictions by − 2.2 to 1.1%, i.e. hardly no change in reliability of prediction was found, regardless of how the RLFV were selected. In addition to these empirical analyses, a simulation study was performed to evaluate the potential impact of adding RLFV in the model on the reliability of prediction. Three sets of causal RLFV (containing 21,468, 1348 and 235 RLFV) that were randomly selected from different numbers of genes were generated and accounted for 10% additional genetic variance of the estimated variance explained by the 50 k SNPs. When genic RLFV based on mapping results were included in the prediction model, reliabilities improved by up to 4.0% and when the causal RLFV were included they improved by up to 6.8%.

Conclusions

Using selected RLFV from whole-genome sequence data had only a small impact on the empirical reliability of genomic prediction in dairy cattle. Our simulations revealed that for sequence data to bring a benefit, the key is to identify causal RLFV.

Electronic supplementary material

The online version of this article (10.1186/s12711-018-0432-8) contains supplementary material, which is available to authorized users.

SNPrune: an efficient algorithm to prune large SNP array and sequence datasets based on high linkage disequilibrium

Background

High levels of pairwise linkage disequilibrium (LD) in single nucleotide polymorphism (SNP) array or whole-genome sequence data may affect both performance and efficiency of genomic prediction models. Thus, this warrants pruning of genotyping data for high LD. We developed an algorithm, named SNPrune, which enables the rapid detection of any pair of SNPs in complete or high LD throughout the genome.

Methods

LD, measured as the squared correlation between phased alleles (r²), can only reach a value of 1 when both loci have the same count of the minor allele. Sorting loci based on the minor allele count, followed by comparison of their alleles, enables rapid detection of loci in complete LD. Detection of loci in high LD can be optimized by computing the range of the minor allele count at another locus for each possible value of the minor allele count that can yield LD values higher than a predefined threshold. This efficiently reduces the number of pairs of loci for which LD needs to be computed, instead of considering all pairwise combinations of loci. The implemented algorithm SNPrune considered bi-allelic loci either using phased alleles or allele counts as input. SNPrune was validated against PLINK on two datasets, using an r² threshold of 0.99. The first dataset contained 52k SNP genotypes on 3534 pigs and the second dataset contained simulated whole-genome sequence data with 10.8 million SNPs and 2500 animals.

Results

SNPrune removed a similar number of SNPs as PLINK from the pig data but SNPrune was almost 12 times faster than PLINK. From the simulated sequence data with 10.8 million SNPs, SNPrune removed 6.4 and 1.4 million SNPs due to complete and high LD. Results were very similar regardless of whether phased alleles or allele counts were used. Using allele counts and multi-threading with 10 threads, SNPrune completed the analysis in 21 min. Using a sliding window of up to 500,000 SNPs, PLINK removed ~ 43,000 less SNPs (0.6%) in the sequence data and SNPrune was 24 to 170 times faster, using one or ten threads, respectively.

Conclusions

The SNPrune algorithm developed here is able to remove SNPs in high LD throughout the genome very efficiently in large datasets.

Electronic supplementary material

The online version of this article (10.1186/s12711-018-0404-z) contains supplementary material, which is available to authorized users.

Utility of whole-genome sequence data for across-breed genomic prediction

Background

Genomic prediction (GP) across breeds has so far resulted in low accuracies of the predicted genomic breeding values. Our objective was to evaluate whether using whole-genome sequence (WGS) instead of low-density markers can improve GP across breeds, especially when markers are pre-selected from a genome-wide association study (GWAS), and to test our hypothesis that many non-causal markers in WGS data have a diluting effect on accuracy of across-breed prediction.

Methods

Estimated breeding values for stature and bovine high-density (HD) genotypes were available for 595 Jersey bulls from New Zealand, 957 Holstein bulls from New Zealand and 5553 Holstein bulls from the Netherlands. BovineHD genotypes for all bulls were imputed to WGS using Beagle4 and Minimac2. Genomic prediction across the three populations was performed with ASReml4, with each population used as single reference and as single validation sets. In addition to the 50k, HD and WGS, markers that were significantly associated with stature in a large meta-GWAS analysis were selected and used for prediction, resulting in 10 prediction scenarios. Furthermore, we estimated the proportion of genetic variance captured by markers in each scenario.

Results

Across breeds, 50k, HD and WGS markers resulted in very low accuracies of prediction ranging from − 0.04 to 0.13. Accuracies were higher in scenarios with pre-selected markers from a meta-GWAS. For example, using only the 133 most significant markers in 133 QTL regions from the meta-GWAS yielded accuracies ranging from 0.08 to 0.23, while 23,125 markers with a − log10(p) higher than 7 resulted in accuracies of up 0.35. Using WGS data did not significantly improve the proportion of genetic variance captured across breeds compared to scenarios with few but pre-selected markers.

Conclusions

Our results demonstrated that the accuracy of across-breed GP can be improved by using markers that are pre-selected from WGS based on their potential causal effect. We also showed that simply increasing the number of markers up to the WGS level does not increase the accuracy of across-breed prediction, even when markers that are expected to have a causal effect are included.

Genomic evaluation of feed efficiency component traits in Duroc pigs using 80K, 650K and whole-genome sequence variants

BACKGROUND

Increasing marker density was proposed to have potential to improve the accuracy of genomic prediction for quantitative traits; whole-sequence data is expected to give the best accuracy of prediction, since all causal mutations that underlie a trait are expected to be included. However, in cattle and chicken, this assumption is not supported by empirical studies. Our objective was to compare the accuracy of genomic prediction of feed efficiency component traits in Duroc pigs using single nucleotide polymorphism (SNP) panels of 80K, imputed 650K, and whole-genome sequence variants using GBLUP, BayesB and BayesRC methods, with the ultimate purpose to determine the optimal method to increase genetic gain for feed efficiency in pigs.

RESULTS

Phenotypes of average daily feed intake (ADFI), average daily gain (ADG), ultrasound backfat depth (FAT), and loin muscle depth (LMD) were available for 1363 Duroc boars from a commercial breeding program. Genotype imputation accuracies reached 92.1% from 80K to 650K and 85.6% from 650K to whole-genome sequence variants. Average accuracies across methods and marker densities of genomic prediction of ADFI, FAT, LMD and ADG were 0.40, 0.65, 0.30 and 0.15, respectively. For ADFI and FAT, BayesB outperformed GBLUP, but increasing marker density had little advantage for genomic prediction. For ADG and LMD, GBLUP outperformed BayesB, while BayesRC based on whole-genome sequence data gave the best accuracies and reached up to 0.35 for LMD and 0.25 for ADG.

CONCLUSIONS

Use of genomic information was beneficial for prediction of ADFI and FAT but not for that of ADG and LMD compared to pedigree-based estimates. BayesB based on 80K SNPs gave the best genomic prediction accuracy for ADFI and FAT, while BayesRC based on whole-genome sequence data performed best for ADG and LMD. We suggest that these differences between traits in the effect of marker density and method on accuracy of genomic prediction are mainly due to the underlying genetic architecture of the traits.

Which Individuals To Choose To Update the Reference Population? Minimizing the Loss of Genetic Diversity in Animal Genomic Selection Programs

Genomic selection (GS) is commonly used in livestock and increasingly in plant breeding. Relying on phenotypes and genotypes of a reference population, GS allows performance prediction for young individuals having only genotypes. This is expected to achieve fast high genetic gain but with a potential loss of genetic diversity. Existing methods to conserve genetic diversity depend mostly on the choice of the breeding individuals. In this study, we propose a modification of the reference population composition to mitigate diversity loss. Since the high cost of phenotyping is the limiting factor for GS, our findings are of major economic interest. This study aims to answer the following questions: how would decisions on the reference population affect the breeding population, and how to best select individuals to update the reference population and balance maximizing genetic gain and minimizing loss of genetic diversity? We investigated three updating strategies for the reference population: random, truncation, and optimal contribution (OC) strategies. OC maximizes genetic merit for a fixed loss of genetic diversity. A French Montbéliarde dairy cattle population with 50K SNP chip genotypes and simulations over 10 generations were used to compare these different strategies using milk production as the trait of interest. Candidates were selected to update the reference population. Prediction bias and both genetic merit and diversity were measured. Changes in the reference population composition slightly affected the breeding population. Optimal contribution strategy appeared to be an acceptable compromise to maintain both genetic gain and diversity in the reference and the breeding populations.

Multi-breed genomic prediction using Bayes R with sequence data and dropping variants with a small effect

Background

The increasing availability of whole-genome sequence data is expected to increase the accuracy of genomic prediction. However, results from simulation studies and analysis of real data do not always show an increase in accuracy from sequence data compared to high-density (HD) single nucleotide polymorphism (SNP) chip genotypes. In addition, the sheer number of variants makes analysis of all variants and accurate estimation of all effects computationally challenging. Our objective was to find a strategy to approximate the analysis of whole-sequence data with a Bayesian variable selection model. Using a simulated dataset, we applied a Bayes R hybrid model to analyse whole-sequence data, test the effect of dropping a proportion of variants during the analysis, and test how the analysis can be split into separate analyses per chromosome to reduce the elapsed computing time. We also investigated the effect of imputation errors on prediction accuracy. Subsequently, we applied the approach to a dataset that contained imputed sequences and records for production and fertility traits for 38,492 Holstein, Jersey, Australian Red and crossbred bulls and cows.

Results

With the simulated dataset, we found that prediction accuracy was highly increased for a breed that was not represented in the training population for sequence data compared to HD SNP data. Either dropping part of the variants during the analysis or splitting the analysis into separate analyses per chromosome decreased accuracy compared to analysing whole-sequence data. First, dropping variants from each chromosome and reanalysing the retained variants together resulted in an accuracy similar to that obtained when analysing whole-sequence data. Adding imputation errors decreased prediction accuracy, especially for errors in the validation population. With real data, using sequence variants resulted in accuracies that were similar to those obtained with the HD SNPs.

Conclusions

We present an efficient approach to approximate analysis of whole-sequence data with a Bayesian variable selection model. The lack of increase in prediction accuracy when applied to real data could be due to imputation errors, which demonstrates the importance of developing more accurate methods of imputation or directly genotyping sequence variants that have a major effect in the prediction equation.

Electronic supplementary material

The online version of this article (doi:10.1186/s12711-017-0347-9) contains supplementary material, which is available to authorized users.

Influence of epistasis on response to genomic selection using complete sequence data

BACKGROUND

The effect of epistasis on response to selection is a highly debated topic. Here, we investigated the impact of epistasis on response to sequence-based selection via genomic best linear prediction (GBLUP) in a regime of strong non-symmetrical epistasis under divergent selection, using real Drosophila sequence data. We also explored the possible advantage of including epistasis in the evaluation model and/or of knowing the causal mutations.

RESULTS

Response to selection was almost exclusively due to changes in allele frequency at a few loci with a large effect. Response was highly asymmetric (about four phenotypic standard deviations higher for upward than downward selection) due to the highly skewed site frequency spectrum. Epistasis accentuated this asymmetry and affected response to selection by modulating the additive genetic variance, which was sustained for longer under upward selection whereas it eroded rapidly under downward selection. Response to selection was quite insensitive to the evaluation model, especially under an additive scenario. Nevertheless, including epistasis in the model when there was none eventually led to lower accuracies as selection proceeded. Accounting for epistasis in the model, if it existed, was beneficial but only in the medium term. There was not much gain in response if causal mutations were known, compared to using sequence data, which is likely due to strong linkage disequilibrium, high heritability and availability of phenotypes on candidates.

CONCLUSIONS

Epistatic interactions affect the response to genomic selection by modulating the additive genetic variance used for selection. Epistasis releases additive variance that may increase response to selection compared to a pure additive genetic action. Furthermore, genomic evaluation models and, in particular, GBLUP are robust, i.e. adding complexity to the model did not modify substantially the response (for a given architecture).

Selecting sequence variants to improve genomic predictions for dairy cattle

Background

Millions of genetic variants have been identified by population-scale sequencing projects, but subsets of these variants are needed for routine genomic predictions or genotyping arrays. Methods for selecting sequence variants were compared using simulated sequence genotypes and real July 2015 data from the 1000 Bull Genomes Project.

Methods

Candidate sequence variants for 444 Holstein animals were combined with high-density (HD) imputed genotypes for 26,970 progeny-tested Holstein bulls. Test 1 included single nucleotide polymorphisms (SNPs) for 481,904 candidate sequence variants. Test 2 also included 249,966 insertions-deletions (InDels). After merging sequence variants with 312,614 HD SNPs and editing steps, Tests 1 and 2 included 762,588 and 1,003,453 variants, respectively. Imputation quality from findhap software was assessed with 404 of the sequenced animals in the reference population and 40 randomly chosen animals for validation. Their sequence genotypes were reduced to the subset of genotypes that were in common with HD genotypes and then imputed back to sequence. Predictions were tested for 33 traits using 2015 data of 3983 US validation bulls with daughters that were first phenotyped after August 2011.

Results

The average percentage of correctly imputed variants across all chromosomes was 97.2 for Test 1 and 97.0 for Test 2. Total time required to prepare, edit, impute, and estimate the effects of sequence variants for 27,235 bulls was about 1 week using less than 33 threads. Many sequence variants had larger estimated effects than nearby HD SNPs, but prediction reliability improved only by 0.6 percentage points in Test 1 when sequence SNPs were added to HD SNPs and by 0.4 percentage points in Test 2 when sequence SNPs and InDels were included. However, selecting the 16,648 candidate SNPs with the largest estimated effects and adding them to the 60,671 SNPs used in routine evaluations improved reliabilities by 2.7 percentage points.

Conclusions

Reliabilities for genomic predictions improved when selected sequence variants were added; gains were similar for simulated and real data for the same population, and larger than previous gains obtained by adding HD SNPs. With many genotyped animals, many data sources, and millions of variants, computing strategies must efficiently balance costs of imputation, selection, and prediction to obtain subsets of markers that provide the highest accuracy.

Electronic supplementary material

The online version of this article (doi:10.1186/s12711-017-0307-4) contains supplementary material, which is available to authorized users.

Evaluating Sequence-Based Genomic Prediction with an Efficient New Simulator

The vast amount of sequence data generated to analyze complex traits is posing new challenges in terms of the analysis and interpretation of the results. Although simulation is a fundamental tool to investigate the reliability of genomic analyses and to optimize experimental design, existing software cannot realistically simulate complete genomes. To remedy this, we have developed a new strategy (Sequence-Based Virtual Breeding, SBVB) that uses real sequence data and simulates new offspring genomes and phenotypes in a very efficient and flexible manner. Using this tool, we studied the efficiency of full sequence in genomic prediction compared to SNP arrays. We used real porcine sequences from three breeds as founder genomes of a 2500-animal pedigree and two genetic architectures: "neutral" and "selective." In the neutral architecture, frequencies and allele effects were sampled independently whereas, in the selective case, SNPs were sites putatively under selection after domestication and a negative correlation between effect and frequency was induced. We compared the effectiveness of different genotyping strategies for genomic selection, including the use of full sequence commercial arrays or randomly chosen SNP sets in both outbred and crossbred experimental designs. We found that accuracy increases using sequence instead of commercial chips but modestly, perhaps by ≤ 4%. This result was robust to extreme genetic architectures. We conclude that full sequence is unlikely to offset commercial arrays for predicting genetic value when the number of loci is relatively large and the prior given to each SNP is uniform. Using sequence to improve selection thus requires optimized prior information and, likely, increased population sizes. The code and manual for SBVB are available at https://github.com/mperezenciso/sbvb0.

Genomic prediction using preselected DNA variants from a GWAS with whole-genome sequence data in Holstein-Friesian cattle

Background

Whole-genome sequence data is expected to capture genetic variation more completely than common genotyping panels. Our objective was to compare the proportion of variance explained and the accuracy of genomic prediction by using imputed sequence data or preselected SNPs from a genome-wide association study (GWAS) with imputed whole-genome sequence data.

Methods

Phenotypes were available for 5503 Holstein–Friesian bulls. Genotypes were imputed up to whole-genome sequence (13,789,029 segregating DNA variants) by using run 4 of the 1000 bull genomes project. The program GCTA was used to perform GWAS for protein yield (PY), somatic cell score (SCS) and interval from first to last insemination (IFL). From the GWAS, subsets of variants were selected and genomic relationship matrices (GRM) were used to estimate the variance explained in 2087 validation animals and to evaluate the genomic prediction ability. Finally, two GRM were fitted together in several models to evaluate the effect of selected variants that were in competition with all the other variants.

Results

The GRM based on full sequence data explained only marginally more genetic variation than that based on common SNP panels: for PY, SCS and IFL, genomic heritability improved from 0.81 to 0.83, 0.83 to 0.87 and 0.69 to 0.72, respectively. Sequence data also helped to identify more variants linked to quantitative trait loci and resulted in clearer GWAS peaks across the genome. The proportion of total variance explained by the selected variants combined in a GRM was considerably smaller than that explained by all variants (less than 0.31 for all traits). When selected variants were used, accuracy of genomic predictions decreased and bias increased.

Conclusions

Although 35 to 42 variants were detected that together explained 13 to 19% of the total variance (18 to 23% of the genetic variance) when fitted alone, there was no advantage in using dense sequence information for genomic prediction in the Holstein data used in our study. Detection and selection of variants within a single breed are difficult due to long-range linkage disequilibrium. Stringent selection of variants resulted in more biased genomic predictions, although this might be due to the training population being the same dataset from which the selected variants were identified.

Electronic supplementary material

The online version of this article (doi:10.1186/s12711-016-0274-1) contains supplementary material, which is available to authorized users.