Potential of selected fungal species to degrade wheat straw, the most abundant plant raw material in Europe

Challenges in developing strategies for the valorization of lignin-a major pollutant of the paper mill industry

Apart from protecting the environment from undesired waste impacts, wastewater treatment is a crucial platform for recovery. The exploitation of suitable technology to transform the wastes from pulp and paper industries (PPI) to value-added products is vital from an environmental and socio-economic point of view that will impact everyday life. As the volume and complexity of wastewater increase in a rapidly urbanizing world, the challenge of maintaining efficient wastewater treatment in a cost-effective and environmentally friendly manner must be met. In addition to producing treated water, the wastewater treatment plant (WWTP) has a large amount of paper mill sludge (PMS) daily. Sludge management and disposal are significant problems associated with wastewater treatment plants. Applying the biorefinery concept is necessary for PPI from an environmental point of view and because of the piles of valuables contained therein in the form of waste. This will provide a renewable source for producing valuables and bio-energy and aid in making the overall process more economical and environmentally sustainable. Therefore, it is compulsory to continue inquiry on different applications of wastes, with proper justification of the environmental and economic factors. This review discusses current trends and challenges in wastewater management and the bio-valorization of paper mills. Lignin has been highlighted as a critical component for generating valuables, and its recovery prospects from solid and liquid PPI waste have been suggested.

From pomiculture waste to biotechnological raw material: efficient transformation using ligninosomes and cellulosomes from Pleurotus spp

The goal of this study was to determine the capacity of Pleurotus spp. lignocellulosome to transform frequent pomiculture residues (grapevine-, plum-, and raspberry sawdust) into raw materials for biotechnological processes. All three lignocellulosics induced the synthesis of ligninolytic and cellulolytic enzymes in the tested species. Laccase was dominant in the ligninolytic cocktail, with a maximum activity of 40,494.88 U L-1 observed after the cultivation of P. pulmonarius on grapevine sawdust. Grapevine sawdust also proved to be the optimal substrate for the synthesis of versatile peroxidases especially in P. eryngii (1010.10 U L-1), while raspberry sawdust favored the production of Mn-dependent peroxidase in P. pulmonarius (479.17 U L-1). P. pulmonarius was the dominant cellulolytic agent and raspberry sawdust was optimal for the synthesis of xylanases, and endo- and exo-cellulases (15,746.35 U L-1, 9741.56 U L-1, and 836.62 U L-1), while grapevine sawdust mostly induced β-glucosidase activity (166.11 U L-1). The degree of residues delignification was more substrate- than species-dependent, ranging between 6.44 and 23.72% after the fermentation of grapevine and raspberry sawdust with P. pulmonarius. On the other hand, the lowest level of cellulose consumption was also observed on raspberry sawdust after the cultivation of P. eryngii, which together with high delignification also induced the highest selectivity index (1.27). The obtained results show the exceptional lignocellulolytic potential of Pleurotus spp. enzyme cocktails which opens up many possibilities for their application in numerous biotechnological processes.

Bundling the removal of emerging contaminants with the production of ligninolytic enzymes from residual streams

Abstract

Enzymes offer interesting features as biological catalysts for industry: high specificity, activity under mild conditions, accessibility, and environmental friendliness. Being able to produce enzymes in large quantities and having them available in a stable and reusable form reduces the production costs of any enzyme-based process. Agricultural residues have recently demonstrated their potential as substrates to produce ligninolytic enzymes by different white rot fungi. In this study, the biotechnological production of a manganese peroxidase (MnP) by Irpex lacteus was conducted through solid-state fermentation (SSF) with wheat straw as substrate and submerged fermentation (SmF) employing wheat straw extract (WSE). The obtained enzyme cocktail also showed manganese-independent activity (MiP), related to the presence of a short MnP and a dye-decolorizing peroxidase (DyP) which was confirmed by shotgun proteomic analyses. In view of the enhanced production of ligninolytic enzymes in SmF, different parameters such as WSE concentration and nitrogen source were evaluated. The highest enzyme titers were obtained with a medium formulated with glucose and peptone (339 U/L MnP and 15 U/L MiP). The scale-up to a 30 L reactor achieved similar activities, demonstrating the feasibility of enzyme production from the residual substrate at different production scales. Degradation of five emerging pollutants was performed to demonstrate the high oxidative capacity of the enzyme. Complete removal of hormones and bisphenol A was achieved in less than 1 h, whereas almost 30% degradation of carbamazepine was achieved in 24 h, which is a significant improvement compared to previous enzymatic treatments of this compound.

Key points

• Wheat straw extract is suitable for the growth of I. lacteus.

• The enzyme cocktail obtained allows the degradation of emerging contaminants.

• Mn-dependent and Mn-independent activities increases the catalytic potential.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s00253-022-11776-7.

Degradation of pretreated agroforestry residues by selected micromycetes

Nowadays, there are huge amounts of lignocellulosic materials left in agroforestry practice, which can be transformed into useful products. Biomass exploitation could be aiming not only at replacing conventional energy sources but also at preserving biodiversity and natural ecosystems. Five micromycetes were studied with goal to determine their potential to produce active cellulases as well as the ability to decompose pretreated wheat straw and oak sawdust after seven days of solid-state fermentation. Wheat straw was better lignocellulosic substrate than oak sawdust for the production of cellulases in all five micromycetes. Thus, Penicillium solitum BEOFB 1190m has shown to be the best producer of highly active forms of xylanases (7532.36 ? 89.37 U/L). The most active endo- and exocellulases (2299.70 ? 72.17 U/L and 195.66 ? 4.64 U/L, respectively) were produced by Trichoderma harzianum BEOFB 1230m, while the maximal value of ?-glucosidase activity (215.69 ? 3.13 U/L) was detected after Fusarium graminearum BEOFB 820m cultivation. T. harzianum also showed high efficiency in wheat straw cellulose and hemicellulose depolymerization (23.90% and 33.00%, respectively), which resulted in the highest dry matter loss (36.25%). The results of the study showed great potential of tested micromycetes to synthesize cellulolytic enzymes and consequently transform abundant, low-cost plant residues such as wheat straw into useful products including biofuel.

A Possibility to Use Selected Crop Post-Extraction Wastes to Improve the Composition of Cultivated Mushroom Pleurotus citrinopileatus

A cultivated mushroom species, Pleurotus citrinopileatus, is becoming increasingly popular thanks to its attractive colour and medicinal properties. In this study, P. citrinopileatus was grown in a cultivation medium enriched with wheat bran (WB), thymus post-extraction waste (TPEW) and pumpkin post-extraction waste (PPEW) products. The study showed that the post-extraction wastes are a crucial factor determining the accumulation of minerals, the content/profile of low-molecular-weight organic acids (LMWOAs) and phenolic compounds in fruit bodies, thereby increasing their nutritional value. The use of the waste materials significantly increased LMWOAs contents. The sum of LMWOAs under all cultivation mediums increased, especially quinic, malic and citric acids under the 20% PPEW, 25 and 50% TPEW addition. Total phenolic content, phenolic content, as well as the composition and scavenging effect on DPPH radicals, were strongly dependent on the used substrate. The control variant was poor in phenolic compounds, while the supplementation increased the contents and diversity of these metabolites. In the control, only four phenolic compounds were quantified (chlorogenic, gallic, syringic and vanillic acids), while in the supplemented substrates up to 14 different phenolic compounds (caffeic, chlorogenic, p-coumaric, 2,5-dihydroxybenzoic acid, ferulic, gallic, protocatechuic, salicylic, sinapic, syringic, trans-cinnamic and vanillic acids, catechin and rutin).

Obtaining Cellulose-Available Raw Materials by Pretreatment of Common Agro-Forestry Residues With Pleurotus spp

The goals of the present study were to characterize the profile of ligninolytic enzymes in five Pleurotus species and determine their ability to delignify eight common agro-forestry residues. Generally, corn stalks were the optimal inducer of Mn-dependent peroxidase activity, but the activity peak was noted after wheat straw fermentation by P. eryngii (3066.92 U/L). P. florida was the best producer of versatile peroxidase, especially on wheat straw (3028.41 U/L), while apple sawdust induced the highest level of laccase activity in P. ostreatus (49601.82 U/L). Efficiency of the studied enzymes was expressed in terms of substrate dry matter loss, which was more substrate-than species-dependent. Reduction of substrate dry mass ranged between 24.83% in wheat straw and 8.83% in plum sawdust as a result of fermentation with P. florida and P. pulmonarius, respectively. The extent of delignification of the studied substrates was different, ranging from 51.97% after wheat straw fermentation by P. pulmonarius to 4.18% in grapevine sawdust fermented by P. ostreatus. P. pulmonarius was also characterized by the highest cellulose enrichment (6.54) and P. ostreatus by very low one (1.55). The tested biomass is a highly abundant but underutilized source of numerous value-added products, and a cocktail of ligninolytic enzymes of Pleurotus spp. could be useful for its environmentally and economically friendly transformation.

Ganoderma (Ganodermataceae, Basidiomycota) Species from the Greater Mekong Subregion

The cosmopolitan fungal genus Ganoderma is an important pathogen on arboreal plant hosts, particularly in tropical and temperate regions. It has long been used as a traditional medicine because of its medicinal properties and chemical constituents. In this study, Ganoderma collections were made in the Greater Mekong Subregion (GMS), encompassing tropical parts of Laos, Myanmar, Thailand, Vietnam, and temperate areas in Yunnan Province, China. The specimens used in this study are described based on micro-macro-characteristics and phylogenetic analysis of combined ITS, LSU, TEF1α, and RPB2 sequence data. In this comprehensive study, we report 22 Ganoderma species from the GMS, namely, G. adspersum, G. applanatum, G. australe, G. calidophilum, G. ellipsoideum, G. flexipes, G. gibbosum, G. heohnelianum, G. hochiminhense, G. leucocontextum, G. lucidum, G. multiplicatum, G. multipileum, G. myanmarense, G. orbiforme, G. philippii, G. resinaceum, G. sichuanense, G. sinense, G. subresinosum, G. williamsianum, and G. tsugae. Some of these species were reported in more than one country within the GMS. Of these 22 species, 12 were collected from Yunnan Province, China; three were collected from Laos; three species, two new records, and one new species were collected from Myanmar; 15 species and four new records were collected from Thailand, and one new species was collected from Vietnam. Comprehensive descriptions, color photographs of macro- and micro-characteristics, the distribution of Ganoderma within the GMS, as well as a phylogenetic tree showing the placement of all reported Ganoderma from the GMS are provided.

3-Methyl-2-benzothiazolinone hydrazone and 3-dimethylamino benzoic acid as substrates for the development of polyphenoloxidase and phenoloxidase activity by zymograms

In the present study, a sequential staining process of polyphenoloxidase and phenoloxidase enzymes was designed by the zymography technique. As a first step, electrophoresis was carried out under native conditions, and later, first staining was carried out with a revealing solution of 3-methyl-2-benzothiazoline hydrazone (MBTH)-3-dimethylamino benzoic acid (DMAB) that allowed the visualization of polyphenoloxidase enzymes, and later and using the same gel, we proceeded to the differential staining of phenoloxidase, adding a solution of H2O2. The technique was standardized using commercial enzymes of laccase (T. versicolor) and horseradish. The technique was used to identify polyphenoloxidases (laccases) and phenoloxidases (lignin peroxidase) of crude extracts obtained from the growth of the basidiomycete Lentinus strigosus on Pinus radiata. The technique showed great sensitivity to detect the different enzymatic activities (1.56 Activity Unit/mL minimum) in the same gel without interference between the enzymes and the solutions used. On the other hand, the efficiency of the technique was compared with the substrates that are commonly used for the detection of this type of activities such as 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) and guaiacol, observing greater sensitivity and minimal interference, so that the present method will allow in the same gel, and visualize polyphenoloxidase and phenoloxidase activities simultaneously facilitating expression studies.

Enzymatic pretreatment of lignocellulosic biomass for enhanced biomethane production-A review

The rapid depletion of natural resources and the environmental concerns associated with the use of fossil fuels as the main source of global energy is leading to an increased interest in alternative and renewable energy sources. Particular interest has been given to the lignocellulosic biomass as the most abundant source of organic matter with a potential of being utilized for energy recovery. Different approaches have been applied to convert the lignocellulosic biomass to energy products including anaerobic digestion (AD), fermentation, combustion, pyrolysis, and gasification. The AD process has been proven as an effective technology for converting organic material into energy in the form of methane-rich biogas. However, the complex structure of the lignocellulosic biomass comprised of cellulose, hemicelluloses, and lignin hinders the ability of microorganisms in an AD process to degrade and convert these compounds to biogas. Therefore, a pretreatment step is essential to improve the degradability of the lignocellulosic biomass to achieve higher biogas rate and yield. A system that uses pretreatment and AD is known as advanced AD. Several pretreatment methods have been studied over the past few years including physical, thermal, chemical and biological pretreatment. This paper reviews the enzymatic pretreatment as one of the biological pretreatment methods which has received less attention in the literature than the other pretreatment methods. This paper includes a review of lignocellulosic biomass composition, AD process, challenges in degrading lignocellulosic materials, the current status of research to improve the biogas rate and yield from the AD of lignocellulosic biomass via enzymatic pretreatment, and the future trend in research for the reduction of enzymatic pretreatment cost.

Ability of different edible fungi to degrade crop straw

Extracellular enzymes play an important role in the growth and development of edible fungi. Extracellular enzyme activities have also become an important object of measurement. In this study, Agaricus brunnescens Peck, Coprinus comatus, and Pleurotus ostreatus were compared in terms of their enzyme production in liquid-and solid-state fermentation. Differences in the ability of various types of edible fungi to utilize biomass raw materials were analyzed by monitoring the fiber degradation rate during crop straw degradation, and changes in their cellulolytic enzyme systems during growth and metabolism were discussed. This study provided insights into the changes in the lignocellulose degradation ability of edible fungi during their growth and facilitated the discovery of new approaches to accelerate their growth in culture.

Mechanistic insight in the selective delignification of wheat straw by three white-rot fungal species through quantitative 13C-IS py-GC-MS and whole cell wall HSQC NMR

BACKGROUND

The white-rot fungi Ceriporiopsis subvermispora (Cs), Pleurotus eryngii (Pe), and Lentinula edodes (Le) have been shown to be high-potential species for selective delignification of plant biomass. This delignification improves polysaccharide degradability, which currently limits the efficient lignocellulose conversion into biochemicals, biofuels, and animal feed. Since selectivity and time efficiency of fungal delignification still need optimization, detailed understanding of the underlying mechanisms at molecular level is required. The recently developed methodologies for lignin quantification and characterization now allow for the in-depth mapping of fungal modification and degradation of lignin and, thereby, enable resolving underlying mechanisms.

RESULTS

Wheat straw treated by two strains of Cs (Cs1 and Cs12), Pe (Pe3 and Pe6) and Le (Le8 and Le10) was characterized using semi-quantitative py-GC-MS during fungal growth (1, 3, and 7 weeks). The remaining lignin after 7 weeks was quantified and characterized using 13C lignin internal standard based py-GC-MS and whole cell wall HSQC NMR. Strains of the same species showed similar patterns of lignin removal and degradation. Cs and Le outperformed Pe in terms of extent and selectivity of delignification (Cs ≥ Le >> Pe). The highest lignin removal [66% (w/w); Cs1] was obtained after 7 weeks, without extensive carbohydrate degradation (factor 3 increased carbohydrate-to-lignin ratio). Furthermore, though after treatment with Cs and Le comparable amounts of lignin remained, the structure of the residual lignin vastly differed. For example, Cα-oxidized substructures accumulated in Cs treated lignin up to 24% of the total aromatic lignin, a factor two higher than in Le-treated lignin. Contrarily, ferulic acid substructures were preferentially targeted by Le (and Pe). Interestingly, Pe-spent lignin was specifically depleted of tricin (40% reduction). The overall subunit composition (H:G:S) was not affected by fungal treatment.

CONCLUSIONS

Cs and Le are both able to effectively and selectively delignify wheat straw, though the underlying mechanisms are fundamentally different. We are the first to identify that Cs degrades the major β-O-4 ether linkage in grass lignin mainly via Cβ-O-aryl cleavage, while Cα-Cβ cleavage of inter-unit linkages predominated for Le. Our research provides a new insight on how fungi degrade lignin, which contributes to further optimizing the biological upgrading of lignocellulose.