Human dental pulp stem cell responses to different dental pulp capping materials

Comparison of bioactive material failure rates in vital pulp treatment of permanent matured teeth - a systematic review and network meta-analysis

Mineral Trioxide Aggregate (MTA) is the gold standard for vital pulp treatment (VPT), but its superiority over novel calcium silicate-based cements in permanent teeth lacks systematic evidence. This study aimed to compare the efficacy of these materials in VPT through a network meta-analysis. A systematic search was conducted in MEDLINE, EMBASE, Cochrane Library, and Web of Science until January 20, 2024. The inclusion criteria were randomized controlled trials involving VPT with biomaterials and reversible or irreversible pulpitis diagnoses in mature permanent teeth. The primary outcome was the odds ratio (OR) of failure rates with 95% confidence intervals. In the 21 eligible trials, failure rates were significantly higher with calcium-hydroxide than MTA at six (OR 2.26 [1.52-3.36]), 12 (OR 2.53 [1.76-3.62]), and 24 months (OR 2.46 [1.60-3.79]). Failure rates for Totalfill at six (OR 1.19 [0.55-2.58]) and 12 months (OR 1.43 [0.71-2.92]), and Biodentine at six (OR 1.09 [0.66-1.78]), 12 (OR 1.21 [0.74-1.96]), and 24 months (OR 1.47 [0.81-2.68]) were not significantly different from MTA. The results were similar in the direct pulp capping subgroup, whereas, in the partial and full pulpotomy subgroup, there was not enough evidence to achieve significant differences. MTA, Biodentine, and Totalfill are the most efficient materials for VPT. However, calcium-hydroxide-based materials are not recommended in VPT.

Apoptotic effects of biodentine, calcium-enriched mixture (CEM) cement, ferric sulfate, and mineral trioxide aggregate (MTA) on human mesenchymal stem cells isolated from the human pulp of exfoliated deciduous teeth

BACKGROUND

Preservation of primary teeth in children is highly important. Pulpotomy is a commonly performed treatment procedure for primary teeth with extensive caries. Thus, biocompatibility of pulpotomy agents is highly important. Biodentine, calcium enriched mixture (CEM) cement, ferric sulfate, and mineral trioxide aggregate (MTA) Angelus are commonly used for this purpose. Thus, this study aimed to assess the apoptotic effects of Biodentine, CEM cement, ferric sulfate, and MTA on stem cells isolated from the human pulp of exfoliated deciduous teeth.

METHODS

In this in-vitro, experimental study, stem cells isolated from the human pulp of exfoliated deciduous teeth were exposed to three different concentrations of Biodentine, CEM cement, ferric sulfate, and MTA for different time periods. The cytotoxicity of the materials was evaluated by flow cytometry using the annexin propidium iodide (PI) kit. Data were analyzed by ANOVA and Tukey's test at P<0.05 level of significance.

RESULTS

All four tested materials induced significantly greater apoptosis compared with the control group. The difference in cell apoptosis caused by the first concentration of ferric sulfate and MTA was not significant at 24 hours. In other comparisons, the cytotoxicity of ferric sulfate was significantly lower than that of other materials. Biodentine showed higher cytotoxicity than MTA at first; but this difference faded over time. The cytotoxicity of CEM cement was comparable to that of MTA. The highest cell viability was noted at 24 hours in presence of the minimum concentration of ferric sulfate. The lowest cell viability was noted at 72 hours in presence of the maximum concentration of CEM cement.

CONCLUSIONS

In comparison with other materials, ferric sulfate showed minimum cytotoxicity; the cytotoxicity of the three cements was comparable. It appears that the concentration of ferric sulfate and the composition of cements are responsible for different levels of cytotoxicity.

Can flowable short-fiber-reinforced resins achieve a strong adhesion to bioceramics?

This study compared the microshear bond strength (μSBS) of four calcium silicate-based cements (CSCs), TheraCal PT (TPT), TheraCal LC (TLC), Biodentine (BD), and Dia-Root Bio MTA (DR), with a short fiber-reinforced composite resin (SFRC). Forty cylindrical acrylic blocks were used, each with a center hole (diameter 5 mm, depth 2 mm). CSCs were placed in the holes (n = 10/group), and the blocks were incubated for 48 h. G-Premio BOND, a self-etching adhesive, was applied to the CSCs surfaces using a micro-applicator for 10 s and then air-dried for 5 s, followed by light curing for 20 s. SFRC materials placed in cylindrical polyethylene capsules (diameter 2 mm, height 2 mm) were polymerized for 20 s and placed over the CSCs. The samples were then incubated at 37°C and 100% humidity for 24 h, and their μSBSs were tested using an "Instron Universal Testing Machine." Data were statistically analyzed using chi-square and Kruskal-Wallis tests. Statistically significant differences were observed between the tested CSCs. The μSBS of TPT (45.17 ± 4.56 MPa) was significantly higher (p < .05) than that of the other materials: BD, TLC, and DR had μSBSs of 29.18 ± 2.86 MPa (p < .05), 23.86 ± 2.84 MPa (p > .05), and 18.08 ± 2.69 MPa (p < .05), respectively. Considering the importance of bond strength for CSC sealing with restorative material, using SFRC over CSC was promising for improving the μSBS, adhesion, and sealing of the material. RESEARCH HIGHLIGHTS: Adhesion is critical to the success of vital pulp restorations. To achieve strong adhesion, the bioceramic material and the resin composite to which it is bonded are very important. In our study, short fiber-reinforced composite resin, which is gaining popularity, was used and found to be a promising material for improved adhesion.

Molecular insights to in vitro biocompatibility of endodontic Pulpotec with macrophages determined by oxidative stress and apoptosis

Pulp therapy has been emerged as a one of the efficient therapies in the field of endodontics. Among different types of new endodontic materials, pulpotec has been materialized as a recognized material for vital pulp therapy. However, its efficacy has been challenged due to lack of information about its cellular biocompatibility. This study evaluates the mechanistic biocompatibility of pulpotec cement with macrophage cells (RAW 264.7) at cellular and molecular level. The biocompatibility was evaluated using experimental and computational techniques like MTT assay, oxidative stress analysis and apoptosis analysis through flow cytometry and fluorescent microscopy. The results showed concentration-dependent cytotoxicity of pulpotec cement extract to RAW 264.7 cells with an LC 50 of X/10-X/20. The computational analysis depicted the molecular interaction of pulpotec cement extract components with metabolic proteins like Sod1 and p53. The study revealed the effects of Pulpotec cement's extract, showing a concentration-dependent induction of oxidative stress and apoptosis. These effects were due to influential structural and functional abnormalities in the Sod1 and p53 proteins, caused by their molecular interaction with internalized components of Pulpotec cement. The study provided a detailed view on the utility of Pulpotec in endodontic applications, highlighting its biomedical aspects.

Elucidating epigenetic mechanisms governing odontogenic differentiation in dental pulp stem cells: an in-depth exploration

Epigenetics refers to the mechanisms such as DNA methylation and histone modification that influence gene expression without altering the DNA sequence. These epigenetic modifications can regulate gene transcription, splicing, and stability, thereby impacting cell differentiation, development, and disease occurrence. The formation of dentin is intrinsically linked to the odontogenic differentiation of dental pulp stem cells (DPSCs), which are recognized as the optimal cell source for dentin-pulp regeneration due to their varied odontogenic potential, strong proliferative and angiogenic characteristics, and ready accessibility Numerous studies have demonstrated the critical role of epigenetic regulation in DPSCs differentiation into specific cell types. This review thus provides a comprehensive review of the mechanisms by which epigenetic regulation controls the odontogenesis fate of DPSCs.

"Biological responses of two calcium-silicate-based cements on a tissue-engineered 3D organotypic deciduous pulp analogue"

OBJECTIVES

The biological responses of MTA and Biodentine™ has been assessed on a three-dimensional, tissue-engineered organotypic deciduous pulp analogue.

METHODS

Human endothelial (HUVEC) and dental mesenchymal stem cells (SHED) at a ratio of 3:1, were incorporated into a collagen I/fibrin hydrogel; succeeding Biodentine™ and MTA cylindrical specimens were placed in direct contact with the pulp analogue 48 h later. Cell viability/proliferation and morphology were evaluated through live/dead staining, MTT assay and Scanning Electron Microscopy (SEM), and expression of angiogenic, odontogenic markers through real time PCR.

RESULTS

Viable cells dominated at day 3 after treatment presenting typical morphology, firmly attached within the hydrogel structures, as shown by live/dead staining and SEM images. MTT assay at day 1 presented a significant increase of cell proliferation in Biodentine™ group. Real-time PCR showed significant upregulation of odontogenic markers DSPP, BMP-2 (day 3,6), RUNX2, ALP (day 3) in contact with Biodentine™ compared to MTA and the control, whereas MTA promoted significant upregulation of DSPP, BMP-2, RUNX2, Osterix (day 3) and ALP (day 6) compared to the control. MSX1 presented downregulation in both experimental groups. Expression of angiogenic markers VEGFa and ANGPT-1 at day 3 was significantly upregulated in contact with Biodentine™ and MTA respectively, while the receptors VEGFR1, VEGFR2 and Tie-2, as well as PECAM-1 were downregulated.

SIGNIFICANCE

Both calcium silicate-based materials are biocompatible and exert positive angiogenic and odontogenic effects, although Biodentine™ during the first days of culture, seems to induce higher cell proliferation and provoke a more profound odontogenic and angiogenic response from SHED.

Exploring vital pulp Therapies: A bibliometric analysis of the most cited articles

Aim

The aim of this study was to identify and analyze the most cited articles on vital pulp therapies.

Methodology

Bibliographical data related to the abstract, citations, keywords, and other relevant information was extracted using different combinations of keywords. Further evaluation and visualization of the selected data were performed with the help of various tools, including MS Excel, Microsoft Word, Google open refine, BibExcel, and VOS viewer. An initial search revealed 91 documents, of which 40 were chosen for further analysis. We used the Kolmogorov-Smirnov test and Spearman correlation coefficient test, and our adopted significance level was p < 0.05.

Results

In total, the articles received 1,905 citations, with six of them receiving at least 100 citations. Among the top 40 articles, the United States of America (10 articles) and Ireland (6 articles) were the countries with the highest number of cited articles. The journals "Journal of Endodontics" (14 articles; 650 citations) and "International Endodontic Journal" (13 articles; 577 citations) published most of the articles among the 50 most cited ones. Duncan H. was the author with the highest number of works cited (11 articles; 339 citations). Of the articles, systematic reviews accounted for 32%, literature reviews for 14%, in vitro experimental studies for 12%, clinical trials for 8%. Among the biomaterials used in vital pulp therapies, mineral trioxide aggregate (MTA) was discussed in 37 articles (74%), followed by calcium hydroxide, mentioned in 30 studies (60%). Interestingly, the publication year did not demonstrate a significant impact on citation count.

Conclusion

The present study provided a detailed list of the top 50 most cited and classic articles on vital pulp therapies. This will help researchers, students, and clinicians in the field of endodontics with an impressive source of information.

Effect of Low-Level Diode Laser and Red Light-Emitting Diode on Survival and Osteogenic/Odontogenic Differentiation of Human Dental Pulp Stem Cells

Background: This investigation set out to compare the impacts of low-level diode laser (LLDL) and red light-emitting diode (LED) on the survival of human dental pulp stem cells (hDPSCs) and osteogenic/odontogenic differentiation. Methods and materials: In this ex vivo experimental study, the experimental groups underwent the irradiation of LLDL (4 J/cm2 energy density) and red LED in the osteogenic medium. Survival of hDPSCs was assessed after 24 and 48 h (n = 9) using the methyl thiazolyl tetrazolium (MTT) assay. The assessment of osteogenic/odontogenic differentiation was conducted using alizarin red staining (ARS; three repetitions). The investigation of osteogenic and odontogenic gene expression was performed at two time points, specifically 24 and 48 h (n = 12). This analysis was performed utilizing real-time reverse-transcription polymerase chain reaction (RT-PCR). The groups were compared at each time point using SPSS version 24. To analyze the data, the Mann-Whitney U test, analysis of variance, Tukey's test, and t-test were utilized. Results: The MTT assay showed that LLDL significantly decreased the survival of hDPSCs after 48 h, compared with other groups (p < 0.05). The qualitative results of ARS revealed that LLDL and red LED increased the osteogenic differentiation of hDPSCs. LLDL and red LED both upregulated the expression of osteogenic/odontogenic genes, including bone sialoprotein (BSP), alkaline phosphatase (ALP), dentin matrix protein 1 (DMP1), and dentin sialophosphoprotein (DSPP), in hDPSCs. The LLDL group exhibited a higher level of gene upregulation (p < 0.0001). Conclusions: The cell survival of hDPSCs was reduced, despite an increase in osteogenic/odontogenic activity. Clinical relevance: Introduction of noninvasive methods in regenerative endodontic treatments.

Fabrication of novel nanofiber composed of gelatin/alginate with zirconium oxide NPs regulate orthodontic progression of cartilage degeneration on Wnt/β-catenin signaling axis in MC3T3-E1 cells

Natural macromolecules like alginate and gelatin are employed to create medication delivery systems that are both safe and effective. Zirconium nanoparticles (ZrO2 NPs) have been proposed as a means of enhancing the alginate-gelatin hydrogel's physical and biological properties. This study combines the synthesis of the biopolymers gelatin and alginate nanofibers with nanoparticles of zirconium oxide (GA/NF- ZrO2 NPs). UV, XRD, FTIR, and SEM were used to characterize the synthesized nanofibers. The expression of osteogenic genes was analyzed by western blotting and qualitative real-time polymerase chain reaction (qRT-PCR). Based on our findings, MC3T3-E1 cells are performed for cell viability, apoptosis and reactive oxygen species production by GA/NF- ZrO2 NPs through the Wnt/β-catenin signaling pathway. Cell migration was accelerated at 75 μg/mL concentration after 24 h of damage in a scratch wound healing assay. Proliferation of the MC3T3-E1 cell line was also detected. GA/NF-ZrO2 NPs influenced the osteogenic variation of MC3T3-E1 cells by inducing autophagy. Furthermore, the impact of obstruction on the temporomandibular joint (TMJ) is a subject of ongoing discussion and analysis within the context of animal models. Coordinated GA/NF-ZrO2 NPs on biomaterial nanofibers could be used to introduce physical signals for modifying MC3T3-E1 responds for orthodontic engineering constructs.

Analysis of the cytotoxicity and bioactivity of CeraSeal, BioRoot™ and AH Plus® sealers in pre-osteoblast lineage cells

BACKGROUND

The objective of the present study was to evaluate in vitro the cytotoxicity and bioactivity of various endodontic sealers (CeraSeal, BioRoot™ and AH Plus®) in pre-osteoblast mouse cells (MC3T3 cells).

METHODS

MC3T3 cells (ATCC CRL-2594) were plated in 1 × 104 cells/well in 96-well plates in contact with endodontic sealers at concentrations of 1:10 and 1:100. Cell viability was evaluated by MTT assay after 24 and 48 h. In addition, sealer bioactivity was measured by RT-PCR for mediator of inflammation (Tnf, Ptgs2) and mineralization (Runx2, Msx1, Ssp1 and Dmp1) after 24 h and by Alizarin Red S Assay of mineralization after 28 days. Data were analyzed using one-way ANOVA followed by the Tukey's post-test at a significance level of 5%.

RESULTS

BioRoot™ presented 24-hour cytotoxicity (p < 0.05) at 1:10 concentration. In the period of 48 h, no endodontic cement was cytotoxic to the cells compared to the control (p > 0.05). TNF-α gene expression was induced by AH Plus® (p < 0.05), while Ptgs2 was induced by the CeraSeal and BioRoot™ (p < 0.05). The expression of Runx2 was stimulated by BioRoot™ and AH Plus® (p < 0.05). In contrast, the expression of Dmp-1 Dmp1 was higher for the CeraSeal and BioRoot™ (p < 0.05). Nonetheless, the sealers did not impact the formation of mineralization nodules (p > 0.05).

CONCLUSION

CeraSeal, BioRoot™ and AH Plus® sealers were not cytotoxic to MC3T3 cells within 48 h, but differentially induced the expression of genes related to inflammation and mineralization without impacting biomineralization by the cells.

Effect of pulp capping materials on odontogenic differentiation of human dental pulp stem cells: An in vitro study

OBJECTIVES

Migration and differentiation of human dental pulp stem cells (hDPSCs) is a vital and key factor in the success of reparative dentin formation for maintenance of pulp vitality. Pulp capping materials are used to stimulate DPSCs to induce new dentin formation. Thus, the aim of the present study was to compare the response of DPSCs to four commercially available pulp capping materials: a bioactive bioceramic (Material 1), a nonresinous ready-to-use bioceramic cement (Material 2), a bioactive composite (Material 3), and a biocompatible, dual-cured, resin-modified calcium silicate (Material 4).

MATERIALS AND METHODS

hDPSCs were isolated and cultured from freshly extracted teeth and were then characterized by flow cytometry and multilineage differentiation. Discs prepared from pulp capping materials were tested with hDPSCs and MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, cell migration assay and odontogenic differentiation assay was performed. Expression of osteogenic markers (osteopontin, RUNX family transcription factor 2, osteocalcin) and the odontogenic marker (dentin sialophosphoprotein) was detected using reverse transcription-polymerase chain reaction.

RESULTS

Materials 1, 2, and 3 generated more cell viability than Material 4. Furthermore, Material 4 showed the least wound exposure percentage, while Material 3 showed the highest percentage. Enhanced mineralization was found in hDSCPs cultured with Material 3, followed by Material 1, and then Material 2, while Material 4 revealed the least calcified mineralization.

CONCLUSIONS

The results of this study were inconclusive regards contemporary bioceramic materials designed for vital pulp therapy as they have different effects on hDPSC. Further testing for cytotoxicity using live-dead staining, animal experiments, clinical trials, and independent analyses of these biomaterials is necessary for clinicians to make an informed decision for their use.

Icariin negatively regulated lipopolysaccharide-induced inflammation and ameliorated the odontogenic activity of human dental pulp cells in vitro

Alleviating inflammation and promoting dentine regeneration is critical for the healing of pulpitis. In this study, we investigated the anti-inflammatory, angiogenesis and odontogenesis function of icariin on Human dental pulp cells (HDPCs) under inflammatory state. Furthermore, the underlying mechanisms was also evaluated. Icariin attenuated the LPS-induced pro-inflammatory marker expression, such as interleukin-1β (IL-1β), IL-6 and IL-8. The immunoblotting and immunofluorescence staining results showed that icariin suppressed the inflammatory responses mediated by the protein kinase B (Akt) and nuclear factor kappa-B (NF-κB) signaling cascades. Additionally, icariin also upregulated the expression of odontogenic and angiogenic genes and proteins (namely dentin sialophosphoprotein (DSPP), dentin matrix protein 1 (DMP1), anti-collagen Ⅰ (COL-Ⅰ), and vascular endothelial growth factor (VEGF) and fibroblast growth factor-1 (FGF-1)), alkaline phosphatase activity, and calcium nodule deposition in LPS-exposed HDPCs. In a word, our findings indicated that icariin attenuated pulp inflammation and promoted odontogenic and angiogenic differentiation in the inflammatory state. Icariin may be a promising vital pulp therapy agent for the regenerative treatment of the inflamed dental pulp.

Comparative biological properties of resin-free and resin-based calcium silicate-based endodontic repair materials on human periodontal ligament stem cells

OBJECTIVES

To investigate the effect of three different calcium silicate-based materials (CSBM) on the biological behavior of human periodontal ligament stem cells (hPDLSCs).

METHODS

Eluates of Biodentine, NeoPutty and TheraCal PT prepared at 1:1, 1:2, and 1:4 ratios were extracted under sterile conditions. The cytotoxicity of the extracts to the hPDLSCs was assessed using the MTT assay. Scratch wound healing assay was utilized for assessing cell migration. Scanning electron microscopy was used to detect cell attachment and morphology. Calcium ion release was measured using inductively coupled plasma-optical emission spectrometry; the pH-value was evaluated with a pH-meter. ANOVA with post hoc Tukey test was used for statistical analysis.

RESULTS

Cell viability was significantly higher for Biodentine and NeoPutty at day 1 with all dilutions (p < 0.05), while at day 3 and day 7 with dilutions 1:2 and 1:4; all materials showed similar behavior (p > 0.05). Biodentine had the highest percentage of cell migration into the scratched area at day 1 for all dilutions (p < 0.05). Stem cells were attached favorably on Biodentine and NeoPutty with evident spreading, and intercellular communications; however, this was not shown for TheraCal PT. Biodentine showed the highest pH values and calcium ion release (p < 0.05).

CONCLUSIONS

The resin-free CSBM showed better performance and favorable biological effects on hPDLSCs and were therefore considered promising for usage as endodontic repair materials.

CLINICAL SIGNIFICANCE

Proper selection of materials with favorable impact on the host stem cells is crucial to ensure outcome in different clinical scenarios.

The effects of melatonin on the viability and osteogenic/odontogenic differentiation of human stem cells from the apical papilla

BACKGROUND

An experimental study was conducted to examine whether melatonin influences osteogenic/odontogenic differentiation of human stem cells derived from the apical papilla (hSCAPs).

MATERIALS AND METHODS

In order to isolate hSCAPs, the undeveloped root of a third molar of a human tooth was used. Melatonin was administered to the experimental groups in an osteogenic medium. No treatment was administered to the control group. The methyl thiazolyl tetrazolium (MTT) assay was performed on days 1, 2, and 3 to assess cell viability (n = 8). A determination of odontogenic/osteogenic differentiation was accomplished using alkaline phosphatase (ALP) activity alizarin red staining (ARS) (n = 6), and the expression of osteogenic genes by real-time polymerase chain reaction (RT-PCR) (n = 3) on days 1, 2, and 7. Evaluation of the data was conducted using SPSS version 18. All experiments were conducted at least three times. The Mann Whitney U test, the ANOVA analysis, Tukey's test, and t-test was implemented to analyze the data (α = 0.05).

RESULTS

After 24 h, 48 h, and 72 h, No significant difference was observed between the control group and the melatonin treatment group in terms of viability of hSCAPs. (from 1 up to 10 µg/ml) (P > 0.05). The assessment of ARS and ALP activity showed that melatonin treatment enhanced osteogenic differentiation of hSCAPs (P < 0.001). Melatonin treatment caused hSCAPs to show an increase of genes related to osteogenic/odontogenic differentiation. These genes included ALP, dentin sialophosphoprotein (DSPP), dentin matrix protein 1 (DMP-1), and bone sialoprotein (BSP) (P < 0.001).

CONCLUSIONS

Melatonin treatment enhanced osteogenic/odontogenic differentiation of hSCAPs with a dose dependent effect on cell viability.

Hydraulic calcium silicate-based root canal sealers mitigate proinflammatory cytokine synthesis and promote osteogenesis in vitro

Background/purpose

The mineralized tissue-inductive ability and anti-inflammatory properties of hydraulic calcium silicate-based (HCSB) sealers have not been fully elucidated. This study aimed to evaluate the effects of the HCSB sealers Bio-C sealer (BioC), Well-Root ST (WST), and EndoSequence BC sealer (BC), on osteoblastic differentiation/mineralization and proinflammatory cytokine synthesis by macrophages.

Materials and methods

Diluted extracts of set sealers or calcium chloride solutions of approximately equivalent Ca2+ concentrations were applied to a mouse osteoblastic cell line (Kusa-A1 cells) and lipopolysaccharide-stimulated mouse macrophage cell line (RAW264.7 cells). Expressions of osteoblastic markers in Kusa-A1 cells and proinflammatory cytokines in RAW264.7 cells were evaluated by reverse transcription-quantitative polymerase chain reaction and enzyme-linked immunosorbent assays. Mineralized nodules were detected by Alizarin red S staining. Cell proliferation was assessed by WST-8 assay and cell attachment on set sealers was examined by scanning electron microscopy.

Results

The three sealer extracts significantly upregulated osteocalcin and osteopontin mRNA, and promoted significant mineralized nodule formation in Kusa-A1 cells. The three sealer extracts significantly downregulated the mRNA expressions of interleukin (IL)-1α, IL-1β, IL-6, and tumor necrosis factor (TNF)-α and protein levels of IL-6 and TNF-α in RAW264.7 cells. Calcium chloride solutions induced osteoblastic differentiation/mineralization. AH Plus Jet (a control sealer) extract did not. The three HCSB sealers did not interfere with the growth and attachment of Kusa-A1 cells.

Conclusion

BioC, WST, and BC were biocompatible, upregulated osteoblastic differentiation/mineralization, and downregulated proinflammatory cytokine expression. Ca2+ released from HCSB sealers might be involved, at least in part, in the induction of osteoblastic differentiation/mineralization.

Engineering core-shell chromium nanozymes with inflammation-suppressing, ROS-scavenging and antibacterial properties for pulpitis treatment

Oral diseases are usually caused by inflammation and bacterial infection. Reactive oxygen species (ROS), which come from both autologous inflammation tissue and bacterial infection, play an important role in this process. Thus, the elimination of excessive intracellular ROS can be a promising strategy for anti-inflammatory treatment. With the rapid development of nanomedicines, nanozymes, which can maintain the intracellular redox balance and protect cells against oxidative damage, have shown great application prospects in the treatment of inflammation-related diseases. However, their performance in pulpitis and their related mechanisms have yet to be explored. Herein, we prepared dozens of metallic nanoparticles with core-shell structures, and among them, chromium nanoparticles (NanoCr) were selected for their great therapeutic potential for pulpitis disease. NanoCr showed a broad antibacterial spectrum and strong anti-inflammatory function. Antibacterial assays showed that NanoCr could effectively inhibit a variety of common pathogens of oral infection. In vitro experiments offered evidence of the multienzyme activity of NanoCr and its function in suppressing ROS-induced inflammation reactions. The experimental results show that NanoCr has optimal antibacterial and anti-inflammatory properties in in vitro cell models, showing great potential for the treatment of pulpitis. Therefore, the use of NanoCr could become a new therapeutic strategy for clinical pulpitis.

Comparative Biocompatibility and Odonto-/Osteogenesis Effects of Hydraulic Calcium Silicate-Based Cements in Simulated Direct and Indirect Approaches for Regenerative Endodontic Treatments: A Systematic Review

BACKGROUND

Regenerative dentistry is the operation of restoring dental, oral and maxillofacial tissues. Currently, there are no guidelines for the ideal cement/material in regenerative endodontic treatments (RET). Hydraulic calcium silicate-based cements (hCSCs) are currently the material of choice for RET.

OBJECTIVES

This systematic review was conducted to gather all of the different direct and indirect approaches of using hCSCs in RET in vitro and in vivo, and to ascertain if there are any superiorities to indirect approaches.

METHODS AND MATERIALS

This systematic review was conducted according to the 2020 PRISMA guidelines. The study question according to the PICO format was as follows: Comparison of the biological behavior (O) of stem cells (P) exposed to hCSCs through direct and indirect methods (I) with untreated stem cells (C). An electronic search was executed in Scopus, Google Scholar, and PubMed.

RESULTS

A total of 78 studies were included. Studies were published between 2010 and 2022. Twenty-eight commercially available and eighteen modified hCSCs were used. Seven exposure methods (four direct and three indirect contacts) were assessed. ProRoot MTA and Biodentine were the most used hCSCs and had the most desirable results. hCSCs were either freshly mixed or set before application. Most studies allowed hCSCs to set in incubation for 24 h before application, which resulted in the most desirable biological outcomes. Freshly mixed hCSCs had the worst outcomes. Indirect methods had significantly better viability/proliferation and odonto-/osteogenesis outcomes.

CONCLUSION

Biodentine and ProRoot MTA used in indirect exposure methods result in desirable biological outcomes.

The Effects of Tricalcium-Silicate-Nanoparticle-Containing Cement: In Vitro and In Vivo Studies

A tricalcium-silicate-nanoparticle-containing cement (Biodentine) was developed to overcome the disadvantages of existing mineral trioxide aggregate (MTA) dental materials. This study aimed at evaluating the effects of Biodentine on the osteogenic differentiation of human periodontal ligament fibroblasts (HPLFs) in vitro and the healing of furcal perforations created experimentally in rat molars in vivo, in comparison to MTA. The in vitro studies performed the following assays: pH measurement using a pH meter, the release of calcium ions using a calcium assay kit, cell attachment and morphology using SEM, cell proliferation using a coulter counter, marker expression using quantitative reverse transcription polymerase chain reaction (qRT-PCR) and cell mineralized deposit formation using Alizarin Red S (ARS) staining. In the in vivo studies, MTA and Biodentine were used to fill the rat molar perforations. Rat molars were processed at 7, 14 and 28 days for analysis of inflammatory processes using hematoxylin and eosin (HE) staining, immunohistochemical staining of Runx2 and tartrate-resistant acid phosphate (TRAP) staining. The results demonstrate that the nanoparticle size distribution of Biodentine is critical for osteogenic potential at an earlier stage compared to MTA. Further studies are required to elucidate the mechanism of action of Biodentine in osteogenic differentiation.

Evaluation of the chemical, physical, and biological properties of a newly developed bioceramic cement derived from cockle shells: an in vitro study

BACKGROUND

Tricalcium silicate is the main component of commercial bioceramic cements that are widely used in endodontic treatment. Calcium carbonate, which is manufactured from limestone, is one of the substrates of tricalcium silicate. To avoid the environmental impact of mining, calcium carbonate can be obtained from biological sources, such as shelled mollusks, one of which is cockle shell. The aim of this study was to evaluate and compare the chemical, physical, and biological properties of a newly developed bioceramic cement derived from cockle shell (BioCement) with those of a commercial tricalcium silicate cement (Biodentine).

METHODS

BioCement was prepared from cockle shells and rice husk ash and its chemical composition was determined by X-ray diffraction and X-ray fluorescence spectroscopy. The physical properties were evaluated following the International Organization for Standardization (ISO) 9917-1;2007 and 6876;2012. The pH was tested after 3 h to 8 weeks. The biological properties were assessed using extraction medium from BioCement and Biodentine on human dental pulp cells (hDPCs) in vitro. The 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5[(phenylamino)carbonyl]-2 H-tetrazolium hydroxide assay was used to evaluate cell cytotoxicity following ISO 10993-5;2009. Cell migration was examined using a wound healing assay. Alizarin red staining was performed to detect osteogenic differentiation. The data were tested for a normal distribution. Once confirmed, the physical properties and pH data were analyzed using the independent t-test, and the biological property data were analyzed using one way ANOVA and Tukey's multiple comparisons test at a 5% significance level.

RESULTS

The main components of BioCement and Biodentine were calcium and silicon. BioCement's and Biodentine's setting time and compressive strength were not different. The radiopacity of BioCement and Biodentine was 5.00 and 3.92 mmAl, respectively (p < 0.05). BioCement's solubility was significantly higher than Biodentine. Both materials exhibited alkalinity (pH ranged from 9 to 12) and demonstrated > 90% cell viability with cell proliferation. The highest mineralization was found in the BioCement group at 7 days (p < 0.05).

CONCLUSIONS

BioCement exhibited acceptable chemical and physical properties and was biocompatible to human dental pulp cells. BioCement promotes pulp cell migration and osteogenic differentiation.

Evaluation of dental pulp stem cells behavior after odontogenic differentiation induction by three different bioactive materials on two different scaffolds

BACKGROUND

To study the odontogenic potential of dental pulp stem cells (DPSCs) after induction with three different bioactive materials: activa bioactive (base/liner) (AB), TheraCal LC (TC), and mineral trioxide aggregate (MTA), when combined with two different types of scaffolds.

METHODS

DPSCs were isolated from freshly extracted premolars of young orthodontic patients, cultured, expanded to passage 4 (P), and characterized by flow cytometric analysis. DPSCs were seeded onto two scaffolds in contact with different materials (AB, TC, and MTA). The first scaffold contained polycaprolactone-nano-chitosan and synthetic hydroxyapatite (PCL-NC-HA), whereas the second scaffold contained polycaprolactone-nano-chitosan and synthetic Mg-substituted hydroxyapatite (PCL-NC-Mg-HA). DPSC viability and proliferation were evaluated at various time points. To assess odontoblastic differentiation, gene expression analysis of dentin sialophosphoprotein (DSPP) by quantitative real-time polymerase chain reaction (qRT-PCR) and morphological changes in cells were performed using inverted microscope phase contrast images and scanning electron microscopy. The fold-change in DSPP between subgroups was compared using a one-way ANOVA. Tukey's test was used to compare the fold-change in DSPP between the two subgroups in multiple comparisons, and P was set at p < 0.05.

RESULTS

DSPP expression was significantly higher in the PCL-NC-Mg-HA group than in the PCL-NC-HA group, and scanning electron microscopy revealed a strong attachment of odontoblast-like cells to the scaffold that had a stronger odontogenic differentiation effect on DPSCs than the scaffold that did not contain magnesium. MTA has a significantly higher odontogenic differentiation effect on cultured DPSCs than AB or TC does. The combination of scaffolds and bioactive materials improves DPSCs induction in odontoblast-like cells.

CONCLUSIONS

The PCL-NC-Mg-HA scaffold showed better odontogenic differentiation effects on cultured DPSCs. Compared to AB and TC, MTA is the most effective bioactive material for inducing the odontogenic differentiation of cultured DPSCs.

Micro-shear bond strength of different calcium silicate materials to bulk-fill composite

Introduction

This study aimed to compare the micro-shear bond strength (µSBS) performances of two resin-based calcium silicate-based cement (CSC) (TheraCal PT and TheraCal LC), Biodentine, and two modified-MTA CSC materials (NeoMTA 2 and BioMTA+) to bulk-fill restorative material.

Materials and Methods

Fifty 3D printed cylindrical resin blocks with a central hole were used (2 mm in depth and 4 mm in diameter). CSCs were placed in the holes (per each group n = 10) and incubated for 24 h. Cylindrical polyethylene molds (2 mm in height and diameter) were used to place the bulk-fill restorative materials on the CSCs and polymerize for 20 s. Then, all specimens were incubated for 24 h at 37 °C at a humidity of 100%. Specimen’s µSBSs were determined with a universal testing machine. Data were analyzed with one-way ANOVA (Welch) and Tamhane test.

Results

Statistically higher µSBS was found for TheraCal PT (29.91 ± 6.13 MPa) (p < 0.05) respect to all the other materials tested. TheraCal LC (20.23 ± 6.32 MPa) (p > 0.05) reported higher µSBS than NeoMTA 2 (11.49 ± 5.78 MPa) and BioMTA+ (6.45 ± 1.89 MPa) (p < 0.05). There was no statistical difference among TheraCal LC, NeoMTA 2 and Biodentine (15.23 ± 7.37 MPa) and between NeoMTA 2 and BioMTA+ (p > 0.05).

Conclusion

Choosing TheraCal PT as the pulp capping material may increase the adhesion and µSBS to the bulk-fill composite superstructure and sealing ability.

Fast-Setting Calcium Silicate-Based Pulp Capping Cements-Integrated Antibacterial, Irritation and Cytocompatibility Assessment

Calcium silicate-based cements (CSCs) are endodontic materials widely used in vital pulp-capping approaches. Concerning the clinical application, the reduced set time and pre-mixed formulations are relevant characteristics during the operative management of pulpal exposure, aiming to optimise the work time and improve cross-infection/asepsis control. Additionally, clinical success seems to be greatly dependent on the biological performance of the materials that directly contact the living pulp. As such, this work approaches an integrative biological characterisation (i.e., antibacterial, irritation, and cytocompatibility assays) of three fast-setting CSCs-Biodentine^TM, TotalFill^® BC RRM™ Fast Putty, and Theracal LC^®. These cements, after setting for 24 h, presented the expected topography and elemental composition (assessed by scanning electron microscopy, coupled with EDS analysis), in accordance with the information of the manufacturer. The set cements displayed a significant and similar antibiofilm activity against S. mutans, in a direct contact assay. Twenty-four-hour eluates were not irritant in the standardised CAM assay, but elicited distinct dose- and time-dependent cytotoxicity profiles on fibroblastic cells-i.e., Biodentine was devoid of toxicity, TotalFill presented a slight dose-dependent initial toxicity that was easily overcome, and Theracal LC was deleterious at high concentrations. When compared to long-setting ProRoot MTA cement, which highlighted the pursued integrative approach, Biodentine presented a similar profile, but TotalFill and Theracal LC displayed a poorer performance regarding antibiofilm activity/cytocompatibility features, and Theracal LC suggested eventual safety concerns.

Effect of diode low level laser and red light emitting diode irradiation on cell proliferation and osteogenic/odontogenic differentiation of stem cells from the apical papilla

BACKGROUND

This experimental study aimed to assess the effect of irradiation of red light-emitting diode (LED) and Diode low-level laser (LLL) on osteogenic/odontogenic differentiation of stem cells from the apical papilla (SCAPs).

MATERIALS AND METHODS

SCAPs were isolated from the human tooth root. The experimental groups were subjected to 4 J/cm² diode low level laser and red LED irradiation in osteogenic medium. The control group did not receive any irradiation. Cell viability/proliferation of SCAPs was assessed by the methyl thiazolyl tetrazolium (MTT) assay on days 1 and 2 (n = 9). Osteogenic differentiation was evaluated by alizarin red staining (ARS) (n = 3), and expression of osteogenic genes by real-time polymerase chain reaction (RT-PCR) (n = 12) on days 1 and 2. SPSS version 18 was used for data evaluation. The Kruskal-Wallis and Mann-Whitney tests were used to compare the groups at each time point.

RESULTS

The MTT assay showed no significant difference in cell viability/proliferation of SCAPs in the low level laser, red LED, and control groups at 24 or 48 h (P < 0.001). The ARS assessment showed that low level laser and red LED irradiation enhanced osteogenic differentiation of SCAPs. low level laser and red LED irradiation both induced over-expression of osteogenic/dentinogenic genes including alkaline phosphatase (ALP), dentin sialophosphoprotein (DSPP), dentin matrix protein 1 (DMP-1), and bone sialoprotein (BSP) in SCAPs. Up-regulation of genes was significantly greater in low level laser irradiation group than red LED group (P < 0.001).

CONCLUSION

Diode low level laser irradiation with 4 J/cm² energy density and red LED irradiation enhanced osteogenic differentiation of SCAPs without adversely affecting cell viability.

The scientific management of deep carious lesions in vital teeth using contemporary materials—A narrative review

Aim

The aim of this article is to review the scientific evidence for deep caries removal in permanent vital teeth and the choice of dentine replacement material and restoration of the teeth to maintain long term tooth vitality and function.

Method

The two position statements namely the European Society of Endodontology and the American Association of Endodontists position statements on vital pulp therapy will be scrutinized and compared with regards to the deep caries removal strategy and assessed for evidence of best practice. The properties of materials used to manage vital pulps and the best way to restore the teeth will be reviewed and guidance on the full management of vital teeth will be suggested.

Conclusions

Promoting new treatment modalities for reversible and irreversible pulpitis allowing for pulp preservation should be considered. Although debatable, cases with deep caries should be managed by complete non-selective caries removal which will allow for pulpal management if needed and a more predictable outcome can be expected when using the new materials and treatment modalities of vital pulp therapy.

Caffeic Acid Phenethyl Ester Induces Vascular Endothelial Growth Factor Production and Inhibits CXCL10 Production in Human Dental Pulp Cells

The survival rate of root non-vital teeth is lower than that of vital teeth. Therefore, to preserve the dental pulp is very important. The vascular endothelial growth factor (VEGF) is the most potent angiogenic factor involved in the vitality of dental pulp including reparative dentin formation. Caffeic acid phenethyl ester (CAPE) is a physiologically active substance of propolis and has some bioactivities such as anti-inflammatory effects. However, there are no reports on the effects of CAPE on dental pulp inflammation. In this study, we investigated the effects of CAPE on VEGF and inflammatory cytokine production in human dental pulp cells (HDPCs) to apply CAPE to an ideal dental pulp protective agent. We found that CAPE induced VEGF production from HDPCs. Moreover, CAPE induced the phosphorylation of p38 mitogen-activated protein kinase (MAPK), extracellular signal-regulated kinases (ERK), and stress-activated protein kinase/c-Jun N-terminal kinase (SAP/JNK) in HDPCs. Furthermore, CAPE inhibited C-X-C motif chemokine ligand 10 (CXCL10) production in Pam3CSK4- and tumor necrosis factor-alpha (TNF-α)-stimulated HDPCs. In conclusion, these results suggest that CAPE might be useful as a novel biological material for vital pulp therapy by exerting the effects of VEGF production and anti-inflammatory activities.

Synthesis and Biocompatibility Evaluation of PCL Electrospun Membranes Coated with MTA/HA for Potential Application in Dental Pulp Capping

This study aimed to develop polycaprolactone (PCL) electrospun membranes coated with mineral trioxide aggregate/hydroxyapatite (MTA/HA) as a potential material for dental pulp capping. Initially, the PCL membrane was prepared by an electrospinning process, which was further surface coated with MTA (labeled as PCLMTA) and HA (labeled as PCLHA). The physico-chemical characterization of the fabricated membranes was carried out using field emission scanning electron microscopy (FE-SEM)/Energy dispersive X-ray (EDX), X-ray diffraction (XRD), Raman spectroscopy, and contact angle analysis. The biocompatibility of the human dental pulp stem cells (hDPSCs) on the fabricated membranes was checked by XTT assay, and the hDPSCs adhesion and spreading were assessed by FE-SEM and confocal microscopy. The wound healing ability of hDPSCs in response to different electrospun membrane extracts was examined by scratch assay. The surface morphology analysis of the membranes by FE-SEM demonstrated a uniform nanofibrous texture with an average fiber diameter of 594 ± 124 nm for PCL, 517 ± 159 nm for PCLHA, and 490 ± 162 nm for PCLMTA. The elemental analysis of the PCLHA membrane indicated the presence of calcium and phosphorous elements related to HA, whereas the PCLMTA membrane showed the presence of calcium and silicate, related to MTA. The presence of MTA and HA in the PCL membranes was also confirmed by Raman spectroscopy. The water contact analysis demonstrated the hydrophobic nature of the membranes. The results indicated that PCL, PCLHA, and PCLMTA membranes were biocompatible, while PCLMTA exhibited better cell adhesion, spreading, and migration.

Comparative chemical properties, bioactivity, and cytotoxicity of resin-modified calcium silicate-based pulp capping materials on human dental pulp stem cells

OBJECTIVES

This study investigated the cytotoxicity, the residual monomer release, degree of conversion (DC), calcium ion (Ca²⁺) release, and crystal structure of TheraCal PT (ThPT) by comparison with TheraCal LC (ThLC) and mineral trioxide aggregate (MTA).

MATERIALS AND METHODS

The cytotoxicity of the cured materials was evaluated on human dental pulp stem cells (hDPSCs) isolated from third molars by the water-soluble tetrazolium salt (WST-1) method. The monomer release and DC of the resin-containing materials were analyzed by high-performance liquid chromatography (HPLC) and Fourier transform infrared (FTIR), respectively. The chemical composition and Ca²⁺ release of the materials were determined by scanning electronic microscopy-energy-dispersive spectroscopy (SEM-EDS), X-ray diffractometry (XRD), and inductively coupled plasma-optical emission spectroscopy (ICP-OES), respectively. Statistical differences were evaluated with one-way ANOVA, repeated measure ANOVA, and the Tukey test (p < 0.05).

RESULTS

MTA showed significantly lower cytotoxicity than either ThLC or ThPT after 1, 3, and 7 days (p < 0.05). TEGDMA release of ThPT is significantly higher than ThLC (p < 0.05). All materials showed calcium Ca²⁺ release, with MTA significantly higher than the others (p < 0.05).

CONCLUSIONS

MTA showed low cytotoxicity and high Ca²⁺ release compared to ThLC and ThPT.

CLINICAL RELEVANCE

The cytotoxicity and residual monomer release of ThLC and ThPT may raise concerns about the viability of hDPSCs. Further investigations with the use of in vivo research models are required to validate in vitro bioactivity properties and the potential adverse biological effects of ThLC and ThPT on hDPSCs.

The Cytotoxicity and Genotoxicity of Bioactive Dental Materials

The promotion of biologically based treatment strategies in restorative dentistry is of paramount importance, as invasive treatments should be avoided to maintain the tooth's vitality. This study aimed to assess the biocompatibility of commercially available bioactive materials that can be used for dental pulp capping. The study was performed with a monocyte/macrophage peripheral blood SC cell line (ATCC CRL-9855) on the following six specific bioactive materials: ProRoot MTA (Dentsply Sirona), MTA Angelus (Angelus), Biodentine (Septodont), TheraCal LC (Bisco), ACTIVA BioACTIVE (Pulpdent) and Predicta Bioactive Bulk (Parkell). The cytotoxicity of the investigated agents was measured using a resazurin-based cell viability assay, while the genotoxicity was evaluated using an alkaline comet assay. Additionally, flow cytometry (FC) apoptosis detection was conducted with a FITC (fluorescein isothiocyanate) Annexin V Apoptosis Detection Kit I. FC cell-cycle arrest assessment was carried out with propidium iodide staining. The results of this study showed no significant cytotoxicity and genotoxicity (p > 0.05) in ProRoot MTA, MTA Angelus, Biodentine, ACTIVA BioACTIVE and Predicta Bioactive. Conversely, TheraCal LC presented a significant decrease (p < 0.001). In conclusion, due to excellent biocompatibility and low cytotoxicity, MTA, Biodentine, ACTIVA BioACTIVE and Predicta Bioactive may be suitable for pulp capping treatments. On the other hand, due to the high cytotoxicity of TheraCal LC, its use should be avoided in vital pulp therapies.

Cytocompatibility and bioactive potential of AH Plus Bioceramic Sealer: an in vitro study

Aim

To assess the cytocompatibility and bioactive potential of the new calcium silicate cement‐based sealer AH Plus Bioceramic Sealer (AHPbcs) on human periodontal ligament stem cells (hPDLSCs) compared with the epoxy resin‐based sealer AH Plus (AHP) and the calcium silicate cement‐based sealer Endosequence BC Sealer (ESbcs).

Methodology

Standardized sample discs and 1:1, 1:2 and 1:4 eluates of the tested materials were prepared. The following assays were performed: surface element distribution via SEM–EDX, cell attachment and morphology via SEM, cell viability via a MTT assay, cell migration/proliferation via a wound‐healing assay, osteo/cemento/odontogenic marker expression via RT‐qPCR and cell mineralized nodule formation via Alizarin Red S staining. HPDLSCs were isolated from extracted third molars. Comparisons were made with hPDLSCs cultured in unconditioned (negative control) or osteogenic (positive control) culture media. Statistical significance was established at p < .05.

Results

A higher peak of Ca²+ was detected from ESbcs compared with AHPbcs and AHP in SEM–EDX. Both AHPbcs and ESbcs showed significantly positive results in the cytocompatibility assays (cell viability, migration/proliferation, attachment and morphology) compared with a negative control group, whilst AHP showed significant negative results. Both AHPbcs and ESbcs exhibited an upregulation of at least one osteo/odonto/cementogenic marker compared with the negative and positive control groups. Both ESbcs and AHPbcs showed a significantly higher calcified nodule formation than the negative and positive control groups, indicative of their biomineralization potential and were also significantly higher than AHP group.

Conclusion

AH Plus Bioceramic Sealer exhibited a significantly higher cytocompatibility and bioactive potential than AH Plus and a similar cytocompatibility to that of Endosequence BC Sealer. Endosequence BC Sealer exhibited a significantly higher mineralization potential than the other tested sealers. The results from this in vitro study act as supporting evidence for the use of AH Plus Bioceramic Sealer in root canal treatment.

Comparative transcriptome profiles of human dental pulp stem cells from maxillary and mandibular teeth

The molecular control of tooth development is different between the maxilla and mandible, contributing to different tooth shapes and locations; however, whether this difference occurs in human permanent teeth is unknown. The aim of this study was to investigate and compare the transcriptome profiles of permanent maxillary and mandibular posterior teeth. Ten participants who had a pair of opposing premolars or molars extracted were recruited. The RNA obtained from cultured dental pulp stem cells underwent RNA-sequencing and qRT-PCR. The transcriptome profiles of two opposing premolar pairs and two molar pairs demonstrated that the upper premolars, lower premolars, upper molars, and lower molars expressed the same top-ranked genes, comprising FN1, COL1A1, COL1A2, ACTB, and EEFIA1, which are involved in extracellular matrix organization, immune system, signal transduction, hemostasis, and vesicle-mediated transport. Comparative transcriptome analyses of each/combined tooth pairs demonstrated that PITX1 was the only gene with different expression levels between upper and lower posterior teeth. PITX1 exhibited a 64-fold and 116-fold higher expression level in lower teeth compared with their upper premolars and molars, respectively. These differences were confirmed by qRT-PCR. Taken together, this study, for the first time, reveals that PITX1 is expressed significantly higher in mandibular posterior teeth compared with maxillary posterior teeth. The difference is more evident in the molars compared with premolars and consistent with its expression pattern in mouse developing teeth. We demonstrate that differences in lower versus upper teeth gene expression during odontogenesis occur in permanent teeth and suggest that these differences should be considered in molecular studies of dental pulp stem cells. Our findings pave the way to develop a more precise treatment in regenerative dentistry such as gene-based therapies for dentin/pulp regeneration and regeneration of different tooth types.

Present status and future directions: Hydraulic materials for endodontic use

BACKGROUND

Hydraulic materials are used in Endodontics due to their hydration characteristics namely the formation of calcium hydroxide when mixing with water and also because of their hydraulic properties. These materials are presented in various consistencies and delivery methods. They are composed primarily of tricalcium and dicalcium silicate, and also include a radiopacifier, additives and an aqueous or a non-aqueous vehicle. Only materials whose primary reaction is with water can be classified as hydraulic.

OBJECTIVES

Review of the classification of hydraulic materials by Camilleri and the literature pertaining to specific uses of hydraulic cements in endodontics namely intra-coronal, intra-radicular and extra-radicular. Review of the literature on the material properties linked to specific uses providing the current status of these materials after which future trends and gaps in knowledge could be identified.

METHODS

The literature was reviewed using PUBMED, and for each clinical use, the in vitro properties such as physical, chemical, biological and antimicrobial characteristics and clinical data were extracted and evaluated.

RESULTS

A large number of publications were retrieved for each clinical use and these were grouped depending on the property type being investigated.

CONCLUSIONS

The hydraulic cements have made a difference in clinical outcomes. The main shortcoming is the poor testing methodologies employed which provide very limited information and also inhibits adequate clinical translation. Furthermore, the clinical protocols need to be updated to enable the materials to be employed effectively.

Effects of BMAL1 on dentinogenic differentiation of Dental Pulp Stem Cells via PI3K / Akt / mTOR pathway

AIM

The present study was aimed to investigate the effect of the circadian clock gene Bmal1 on dentinogenic differentiation of dental pulp stem cells (DPSCs) under inflammatory conditions.

METHODOLOGY

DPSCs were isolated from the pulp tissue of the healthy donor and were then stimulated with different concentrations of lipopolysaccharide (LPS) to mimic inflammatory conditions. Real-time polymerase chain reaction (PCR) was used to detect the gene expression of circadian clock genes Bmal1, Clock, Per1, Per2, Cry1, and Cry2. Western blot (WB) was applied to analyze the protein expression of circadian clock proteins (BMAL1, CLOCK) and dentinogenic differentiation related proteins (DSPP, DMP1). In addition, the apoptosis and osteogenic differentiation of DPSCs were also analyzed in the presence of different concentrations of LPS.

RESULTS

The expression of circadian clock genes of DPSCs significantly changed in an inflammatory environment. WB analysis shows that BMAL1 is relevant to the dentinogenic differentiation of DPSCs. In low concentrations of LPS-mimicked inflammatory condition, the expression of BMAL1 increased and promoted the dentinogenic differentiation of DPSCs. However, under high concentrations of LPS-mimicked inflammatory condition, the expression of BMAL1 decreased and inhibited the dentinogenic differentiation of DPSCs. Moreover, the effects of BMAL1 on dentinogenic differentiation of DPSCs may be through PI3K / Akt / mTOR pathway.

CONCLUSIONS

This study showed that the circadian clock gene Bmal1 affected dentinogenic differentiation of DPSCs, providing a new insight for clinical stem cell-based restorative dentinogenesis therapies.

Combining Materials Obtained by 3D-Printing and Electrospinning from Commercial Polylactide Filament to Produce Biocompatible Composites

The design of scaffolds to reach similar three-dimensional structures mimicking the natural and fibrous environment of some cells is a challenge for tissue engineering, and 3D-printing and electrospinning highlights from other techniques in the production of scaffolds. The former is a well-known additive manufacturing technique devoted to the production of custom-made structures with mechanical properties similar to tissues and bones found in the human body, but lacks the resolution to produce small and interconnected structures. The latter is a well-studied technique to produce materials possessing a fibrillar structure, having the advantage of producing materials with tuned composition compared with a 3D-print. Taking the advantage that commercial 3D-printers work with polylactide (PLA) based filaments, a biocompatible and biodegradable polymer, in this work we produce PLA-based composites by blending materials obtained by 3D-printing and electrospinning. Porous PLA fibers have been obtained by the electrospinning of recovered PLA from 3D-printer filaments, tuning the mechanical properties by blending PLA with small amounts of polyethylene glycol and hydroxyapatite. A composite has been obtained by blending two layers of 3D-printed pieces with a central mat of PLA fibers. The composite presented a reduced storage modulus as compared with a single 3D-print piece and possessing similar mechanical properties to bone tissues. Furthermore, the biocompatibility of the composites is assessed by a simulated body fluid assay and by culturing composites with 3T3 fibroblasts. We observed that all these composites induce the growing and attaching of fibroblast over the surface of a 3D-printed layer and in the fibrous layer, showing the potential of commercial 3D-printers and filaments to produce scaffolds to be used in bone tissue engineering.