Myco-synthesized copper oxide nanoparticles using harnessing metabolites of endophytic fungal strain Aspergillus terreus: an insight into antibacterial, anti-Candida, biocompatibility, anticancer, and antioxidant activities

Synthesis and characterization of gelatin/chondroitin sulfate microgels with NaCl: Preliminary research toward wound healing applications

Gelatin and chondroitin sulfate are natural polymers with significant potential in the biomedical field, particularly for wound healing applications. They can form hydrogels that absorb exudates and exhibit anti-inflammatory and antioxidant properties. Silver nanoparticles (AgNPs) can be used as antibacterial agents in wound management. Moreover, the addition of NaCl may enhance the efficacy and mechanical properties of the microgels. This study focuses on the synthesis and characterization of gelatin/chondroitin sulfate powder hydrogels, both with and without AgNPs, obtained through fungal digestion and NaCl for potential acute wound healing application. As a result, AgNPs were successfully synthesized, they are spherical with an average size of 19 ± 6 nm. Microgels were obtained via electrostatic interactions and processed using spray drying equipment, the highest yield was 50.2 ± 7.1 %. Characterization results indicated that the composition significantly influenced the yield percentage, which was greater in samples containing NaCl. Moreover, particle areas varied significantly from 6.0 ± 1.3 μm2 to 85.6 ± 35.9 μm2 with the incorporation of salt. Swelling capacities were similar over time, with highest values at 15 min exceeding 500 % under physiological conditions. Notably, microgels exhibited enhanced disintegration resistance compared to gelatin alone, making them suitable for sustained wound coverage. The incorporation of AgNPs conferred notable antimicrobial activity; however, it adversely affected erythrocyte viability. Therefore, microgels without AgNPs, particularly those containing NaCl, may be suitable for acute wounds management, while alternative methods or lower concentrations of AgNPs may be required to retain antibacterial properties.

Biosynthesis of nanoparticles using microorganisms: A focus on endophytic fungi

The concept of this review underscores a significant shift towards sustainable agricultural practices, particularly from the view point of microbial biotechnology and nanotechnology. The global food insecurity that causes increasing ecological imbalances is exacerbating food insecurity, and this has necessitated eco-friendly agricultural innovations. The chemical fertilizers usage aims at boosting crop yields, but with negative environmental impact, thus pushing for alternatives. Microbial biotechnology and nanotechnology fields are gaining traction for their potential in sustainable agriculture. Endophytic fungi promise to synthesize nanoparticles (NPs) that can enhance crop productivity and contribute to ecosystem stability. Leveraging on endophytic fungi could be key to achieving food security goals. Endophytic fungi explore diverse mechanisms in enhancing plant growth and resilience to environmental stresses. The application of endophytic fungi in agricultural settings is profound with notable successes. Hence, adopting interdisciplinary research approaches by combining mycology, nanotechnology, agronomy, and environmental science can meaningfully serve as potential pathways and hurdles for the commercialization of these biotechnologies. Therefore, setting regulatory frameworks for endophytic nanomaterials use in agriculture, by considering their safety and environmental impact assessments will potentially provide future research directions in addressing the current constraints and unlock the potential of endophytic fungi in agriculture.

Metallic nanoparticles: a promising novel therapeutic tool against antimicrobial resistance and spread of superbugs

In recent years, antimicrobial resistance (AMR) has become an alarming threat to global health as notable increase in morbidity and mortality has been ascribed to the emergence of superbugs. The increase in microbial resistance because of harboured or inherited resistomes has been complicated by the lack of new and effective antimicrobial agents, as well as misuse and failure of existing ones. These problems have generated severe and growing public health concern, due to high burden of bacterial infections resulting from scarce financial resources and poor functioning health systems, among others. It is therefore, highly pressing to search for novel and more efficacious alternatives for combating the action of these super bacteria and their infection. The application of metallic nanoparticles (MNPs) with their distinctive physical and chemical attributes appears as promising tools in fighting off these deadly superbugs. The simple, inexpensive and eco-friendly model for enhanced biologically inspired MNPs with exceptional antimicrobial effect and diverse mechanisms of action againsts multiple cell components seems to offer the most promising option and said to have enticed many researchers who now show tremendous interest. This synopsis offers critical discussion on application of MNPs as the foremost intervening strategy to curb the menace posed by the spread of superbugs. As such, this review explores how antimicrobial properties of the metallic nanoparticles which demonstrated considerable efficacy against several multi-drugs resistant bacteria, could be adopted as promising approach in subduing the threat of AMR and harvoc resulting from the spread of superbugs.

Synthesis of omega-3 mediated copper (ω-3-Cu) and copper oxide (ω-3-CuO) nanocatalyst dual application of dye decolourization and aerobic oxidation of eco-friendly sustainable approach

In this study, ω-3-Cu and ω-3-CuO nanocatalysts were investigated for industrial environmental issues. Nowadays, green methodology is very important for addressing industrial environmental issues. In this regard, the current study focuses on ω-3-Cu and ω-3-CuO used for aerobic oxidation and dye decolourization via an eco-friendly approach. The synthesised ω-3-Cu and ω-3-CuO nanocatalysts were characterised using FT-IR, UV, XRD, TEM, GC-MS, 1H and 13C NMR. The results showed that the prepared ω-3-Cu catalyst was almost spherical with forms and sizes typically less than 20 nm and the ω-3-CuO nanocatalyst 10 nm. The ω-3 Cu and ω-3-CuO nanocatalysts were investigated for the conversion of pentan-2-ol into pentan-2-one, which was observed by GC-MS analysis. The ω-3-CuO nanocatalyst decolourised the Brilliant Blue dye more quickly (100% in 30 min) than ω-3-Cu (85% in 60 min) and ω-3 (no colour in 60 min), and Rhodamine B was not decolourised because our ω-3-Cu and ω-3-CuO nanocatalysts inactivated the rhodamine B dye. The aerobic oxidation process using the ω-3-CuO nanocatalyst as the end product of pentan-2-one resulted in a retention time of 30.33. To the best of our knowledge, ω-3-Cu and ω-3-CuO nanocatalysts have not been documented for their application in decolourisation and aerobic oxidation. By highlighting the potential use for the continued advancement and innovation of ω-3-CuO nanocatalysts in the long-term future, cost-effective and eco-friendly methods for producing reusable ω-3-CuO nanocatalysts have the potential to be applied in advanced technical fields, particularly in the areas of dye decolourisation and aerobic oxidation. Finally, we successfully accomplished these processes using the ω-3-CuO nanocatalyst. The ω-3-CuO nanocatalyst evaporated more quickly than the ω-3-Cu and ω-3-CuO nanocatalyst, without any additional energy. ω-3-CuO is the most effective nanocatalyst for dye decolourization and aerobic oxidation (Dual application). ω-3-CuO is used in textile and pharmaceutical industries.

Actinobacterium-Mediated Green Synthesis of CuO/Zn-Al LDH Nanocomposite Using Micromonospora sp. ISP-2 27: A Synergistic Study that Enhances Antimicrobial Activity

Bacterial resistance to conventional antibiotics has created an urgent need to develop enhanced alternatives. Nanocomposites combined with promising antibacterial nanomaterials can show improved antimicrobial activity compared to that of their components. In this work, green synthesized CuO nanoparticles (NPs) supported on an anionic clay with a hydrotalcite-like structure such as Zn-Al layered double hydroxide (LDH) nanocomposite were investigated as antimicrobial agents. This nanocomposite was synthesized using Micromonospora sp. ISP-2 27 cell-free supernatant to form CuO NPs on the surface of previously synthesized LDH. The prepared samples were characterized using UV-Vis spectrophotometry, XRD, FTIR, Field emission scanning electron microscopy with EDX, zeta potential, and hydrodynamic particle size. UV-vis spectral analysis of the biosynthesized CuO NPs revealed a maximum peak at 300 nm, indicating their successful synthesis. The synthesized CuO NPs had a flower-like morphology with a size range of 43-78 nm, while the LDH support had a typical hexagonal layered structure. The zeta potentials of the CuO NPs, Zn-Al LDH, and CuO NPs/LDH nanocomposite were -21.4, 22.3, and 30.8 mV, respectively, while the average hydrodynamic sizes were 687, 735, and 528 nm, respectively. The antimicrobial activity of the produced samples was tested against several microbes. The results demonstrated that the nanocomposite displayed superior antimicrobial properties compared to those of its components. Among the microbes tested, Listeria monocytogenes ATCC 7644 was more sensitive (30 ± 0.34) to the biosynthesized nanocomposite than to CuO NPs (25 ± 0.05) and Zn-Al LDH (22 ± 0.011). In summary, the use of nanocomposites with superior antimicrobial properties has the potential to offer innovative solutions to the global challenge of antibiotic resistance by providing alternative treatments, reducing the reliance on traditional antibiotics, and contributing to the development of more effective and targeted therapeutic approaches.

Green mediated synthesis of cerium oxide nanoparticles by using Oroxylum indicum for evaluation of catalytic and biomedical activity

The present perspective emphasizes the green synthesis of CeO2-NPs using Oroxylum indicum fruit extract. The synthesized NPs were characterized utilizing analytical techniques, including FT-IR, UV-vis, XRD, SEM-EDX, and VSM. Of them, XRD analysis ratifies the cubic fluorite crystal structure along with a particle size of 23.58 nm. EDX results support the presence of cerium and oxygen in a proper ratio. The surface morphology of NPs, however, was scrutinized using SEM. The lower IC50 value (20.8 μg mL-1) of NPs compared to the reference substance, ascorbic acid (33.2 μg mL-1), demonstrates CeO2-NPs to be a compatible antioxidant. Moreover, the drug-releasing capability of CeO2-NPs was a buffer pH-dependent parameter. The acidic pH solution was 20.5%, while the basic pH solution was 16.9%. The drug-releasing capability was analyzed using the Higuchi model and Korsmeyer-Peppas kinetics. The values of the determination coefficient (R 2) were found to be 0.9944 and 0.9834, respectively. The photocatalytic activity of CeO2-NPs was evaluated, considering methylene blue as a model dye. The degradation percentage was attained up to 56.77% after it had been exposed for 150 min. Apart from this, the synthesized NPs were screened against two fungus species, Bipolaris sorokiniana and Fusarium. The percentage of growth was measured at 56% and 49%, respectively.

Synthesis, Optimization, and Characterization of Cellulase Enzyme Obtained from Thermotolerant Bacillus subtilis F3: An Insight into Cotton Fabric Polishing Activity

The efficacy of 40 bacterial isolates obtained from hot spring water samples to produce cellulase enzymes was investigated. As a result, the strain Bacillus subtilis F3, which was identified using traditional and molecular methods, was selected as the most potent for cellulase production. Optimization was carried out using one-factor-at-a-time (OFAT) and BOX-Behnken Design to detect the best conditions for the highest cellulase activity. This was accomplished after an incubation period of 24 h at 45°C and pH 8, with an inoculum size of 1% (v/v), 5 g/l of peptone as nitrogen source, and 7.5 g/l of CMC. Moreover, the best concentration of ammonium sulfate for cellulase enzyme precipitation was 60% followed by purification using a dialysis bag and Sephadex G-100 column chromatography to collect the purified enzyme. The purified cellulase enzyme was characterized by 5.39-fold enrichment, with a specific activity of 54.20 U/mg and a molecular weight of 439 kDa. There were 15 amino acids involved in the purified cellulase, with high concentrations of 160 and 100 mg/l for glycine and proline respectively. The highest stability and activity of the purified cellulase was attained at pH 7 and 50°C in the presence of 150 ppm of CaCl2, NaCl, and ZnO metal ions. Finally, the biopolishing activity of the cellulase enzyme, as indicated by weight loss percentages of the cotton fabric, was dependent on concentration and treatment time. Overall, the thermotolerant B. subtilis F3 strain has the potential to provide highly stable and highly active cellulase enzyme for use in biopolishing of cotton fabrics.