Construction and development of an auto-regulatory gene expression system in Bacillus subtilis

Construction of cytomegalovirus promoter-driven gene expression system in Laodelphax striatellus

The small brown planthopper (SBPH, Laodelphax striatellus) is a significant rice pest, responsible for transmitting rice stripe virus (RSV) in a persistent and propagative manner. RSV is one of the most detrimental rice viruses, causing rice stripe disease, which results in considerable loss of rice grain yield. While RNA interference and gene knockout techniques have enabled gene downregulation in SBPH, no system currently exists for the overexpression of endogenous or exogenous genes. Consequently, the development of a protein expression system for SBPH is imperative to serve as a technical foundation for pest control and gene function investigations. This study aimed to construct an expression vector using the promoter of the constitutive-expressed tubulin gene of SBPH, and promoter of human cytomegalovirus (CMV). Fluorescence experiments demonstrated that both tubulin and CMV promoter could drive green fluorescent protein (GFP) expression in SBPH, and could also facilitate the expression of a nucleocapsid protein (NP) -GFP fusion protein containing viral NP with comparable efficiency. Through expression vector optimization, we have identified that the 3 tandem CMV promoters display a significantly higher promoter activity compared with both the 2 tandem CMV promoters and the single CMV promoter. In addition, the incorporation of Star polycation nanoparticles significantly enhanced the expression efficiency in SBPH. These results provide a promising technical platform for investigating gene functions in SBPH.

Integrated Biofilm Modification and Transcriptional Analysis for Improving Fengycin Production in Bacillus amyloliquefaciens

Although fengycin exhibits broad-spectrum antifungal properties, its application is hindered due to its low biosynthesis level and the co-existence of iturin A and surfactin in Bacillus amyloliquefaciens HM618, a probiotic strain. In this study, transcriptome analysis and gene editing were used to explore the potential mechanisms regulating fengycin production in B. amyloliquefaciens. The fengycin level of B. amyloliquefacien HM-3 (∆itu-ΔsrfAA) was 88.41 mg/L after simultaneously inhibiting the biosyntheses of iturin A and surfactin. The knockout of gene eps associated with biofilm formation significantly increased the fengycin level of the strain HM618, whereas the fengycin level decreased 32.05% after knocking out sinI, a regulator of biofilm formation. Transcriptome analysis revealed that the differentially expressed genes, involved in pathways of amino acid and fatty acid syntheses, were significantly down-regulated in the recombinant strains, which is likely associated with a decrease of fengycin production. The knockout of gene comQXPA and subsequent transcriptome analysis revealed that the ComQXPA quorum sensing system played a positive regulatory role in fengycin production. Through targeted genetic modifications and fermentation optimization, the fengycin production of the engineered strain HM-12 (∆itu-ΔsrfAA-ΔyvbJ) in a 5-L fermenter reached 1.172 g/L, a 12.26-fold increase compared to the fengycin level in the strain HM-3 (∆itu-ΔsrfAA) in the Erlenmeyer flask. Taken together, these results reveal the underlying metabolic mechanisms associated with fengycin synthesis and provide a potential strategy for improving fengycin production in B. amyloliquefaciens.

Bacillus subtilis remains translationally active after CRISPRi-mediated replication initiation arrest

Initiation of bacterial DNA replication takes place at the origin of replication (oriC), a region characterized by the presence of multiple DnaA boxes that serve as the binding sites for the master initiator protein DnaA. This process is tightly controlled by modulation of the availability or activity of DnaA and oriC during development or stress conditions. Here, we aimed to uncover the physiological and molecular consequences of stopping replication in the model bacterium Bacillus subtilis. We successfully arrested replication in B. subtilis by employing a clustered regularly interspaced short palindromic repeats interference (CRISPRi) approach to specifically target the key DnaA boxes 6 and 7, preventing DnaA binding to oriC. In this way, other functions of DnaA, such as a transcriptional regulator, were not significantly affected. When replication initiation was halted by this specific artificial and early blockage, we observed that non-replicating cells continued translation and cell growth, and the initial replication arrest did not induce global stress conditions such as the SOS response.IMPORTANCEAlthough bacteria constantly replicate under laboratory conditions, natural environments expose them to various stresses such as lack of nutrients, high salinity, and pH changes, which can trigger non-replicating states. These states can enable bacteria to (i) become tolerant to antibiotics (persisters), (ii) remain inactive in specific niches for an extended period (dormancy), and (iii) adjust to hostile environments. Non-replicating states have also been studied because of the possibility of repurposing energy for the production of additional metabolites or proteins. Using clustered regularly interspaced short palindromic repeats interference (CRISPRi) targeting bacterial replication initiation sequences, we were able to successfully control replication initiation in Bacillus subtilis. This precise approach makes it possible to study non-replicating phenotypes, contributing to a better understanding of bacterial adaptive strategies.

Implementation of Fluorescent-Protein-Based Quantification Analysis in L-Form Bacteria

Cell-wall-less (L-form) bacteria exhibit morphological complexity and heterogeneity, complicating quantitative analysis of them under internal and external stimuli. Stable and efficient labeling is needed for the fluorescence-based quantitative cell analysis of L-forms during growth and proliferation. Here, we evaluated the expression of multiple fluorescent proteins (FPs) under different promoters in the Bacillus subtilis L-form strain LR2 using confocal microscopy and imaging flow cytometry. Among others, Pylb-derived NBP3510 showed a superior performance for inducing several FPs including EGFP and mKO2 in both the wild-type and L-form strains. Moreover, NBP3510 was also active in Escherichia coli and its L-form strain NC-7. Employing these established FP-labeled strains, we demonstrated distinct morphologies in the L-form bacteria in a quantitative manner. Given cell-wall-deficient bacteria are considered protocell and synthetic cell models, the generated cell lines in our work could be valuable for L-form-based research.

Research on the Regulation of Plipastatin Production by the Quorum-Sensing ComQXPA System of Bacillus amyloliquefaciens

Plipastatin is a cyclic lipopeptide synthesized by non-ribosomal peptide synthetases (NRPS), which has a diverse range of applications in postharvest preservation of fruits and vegetables, biological control, and feed processing. Whereas the yield of plipastatin in wild Bacillus sp. is low, its chemical structure is complex and challenging to synthesize, significantly limiting its production and application. ComQXPA-P_srfA, a quorum-sensing (QS) circuit from Bacillus amyloliquefaciens, was constructed in this study. Two QS promoters MuP_srfA and MtP_srfA, with 35 and 100% increased activity, respectively, were obtained by mutating the original promoter P_srfA. Thus, the natural promoter of plipastatin was replaced by a QS promoter to achieve the dynamic regulation of plipastatin, which increased the yield of plipastatin by 3.5 times. Integrating ComQXPA into plipastatin mono-producing M-24:MtP_srfA increased the yield of plipastatin to 3850 mg/L, representing the highest yield reported to date. Four new plipastatins were identified via UPLC-ESI-MS/MS and GC-MS analysis of fermentation products of mono-producing engineered strains. Among them, three plipastatins contained two double bonds in the fatty acid side chain, representing the first example of a new type of plipastatin. Our results indicate that the QS system ComQXPA-P_srfA of Bacillus can dynamically regulate plipastatin production, and the pipeline could be extended to the other strains to regulate target products dynamically.

Development of a Growth-Dependent System to Regulate Cell Growth and Keratinase Production in B. subtilis

Keratinases specifically degrade insoluble keratin waste, thus contributing to environmental protection and sustainable biomass development. However, their industrial application is hindered by inefficient enzyme production and poor biomass generation. In this study, the heterologous expression of keratinase was found to have cytotoxicity and might block host cell growth due to its proteolytic property. To address this problem, an autoregulatory expression system based on quorum sensing was developed to synergistically regulate cell growth and keratinase production in Bacillus subtilis. The growth-dependent promoter P_aprE was chosen and shown to be effective in delaying keratinase production while promoting host cell proliferation. Copy number screening and core region mutations further balanced the two states. Carbon supplement optimization indicated that addition of 2% glucose facilitated biomass accumulation during the early stage of fermentation. Cell density increased to 15.6 (OD_600 nm) from 8 with keratinase activity raised to 4200 U·mL^-1 from 1162 U·mL^-1. Keratinase was then utilized in the bioconversion of feather waste to prepare soluble keratins, polypeptides, and amino acids. This study provides a powerful system for efficient production of keratinase and paves the way for keratin waste recycling.

Development of a Glycerol-Inducible Expression System for High-Yield Heterologous Protein Production in Bacillus subtilis

The development of efficient, low-cost, and robust expression systems is important for the mass production of proteins and natural products in large amounts using cell factories. Glycerol is an ideal carbon source for large-scale fermentation due to its low cost and favorable maintenance of the fermentation process. Here, we used the antiterminator protein GlpP and its target promoter P_glpD to construct a highly efficient glycerol-inducible expression system (GIES) in Bacillus subtilis. This system was able to express heterologous genes in an autoinducible manner based on the sequential utilization of glucose and glycerol under the regulation of carbon catabolite repression. In such a system, the concentration of glycerol regulated the strength of gene expression, and the concentration of glucose affected both the timing of induction and the strength of gene expression. By enhancing GlpP, the GIES was further strengthened for high-level intracellular expression of aspartase and secretory expression of nattokinase. High yields of nattokinase in a 5-L fermenter through batch and fed-batch fermentation demonstrated the potential to apply the GIES for large-scale enzyme production. Through the evolution of the -10 box of P_glpD, mutants with gradient activities were obtained. In addition, hybrid glycerol-inducible promoters were successfully constructed by combining the constitutive promoters and the 5' untranslated region of P_glpD. Collectively, this study developed a GIES to obtain high-value products from inexpensive glycerol. More importantly, the great potential of the pair of inherent terminator and antiterminator protein as a portable biological tool for various purposes in synthetic biology is proposed. IMPORTANCE In this study, a GIES was constructed in B. subtilis by employing the antiterminator protein GlpP and the GlpP-regulated promoter P_glpD. Based on the sequential utilization of glucose and glycerol by B. subtilis, the GIES was able to express genes in an autoinducible manner. The amounts and ratio of glucose and glycerol can regulate the gene induction timing and expression strength. The GIES was further applied for high yields of nattokinase, and its robustness in production scale-up was confirmed in a 5-L fermenter. The high-level expression of heterologous proteins demonstrated the huge application potential of the GIES. Furthermore, mutants of P_glpD with gradient activities and hybrid glycerol-inducible promoters were obtained through the evolution of the -10 box of P_glpD and the combination of the constitutive promoters and the 5' untranslated region of P_glpD, respectively. These results demonstrated the use of the antiterminator protein as a regulator for various purposes in synthetic biology.

Acetoin production from lignocellulosic biomass hydrolysates with a modular metabolic engineering system in Bacillus subtilis

Background

Acetoin (AC) is a vital platform chemical widely used in food, pharmaceutical and chemical industries. With increasing concern over non-renewable resources and environmental issues, using low-cost biomass for acetoin production by microbial fermentation is undoubtedly a promising strategy.

Results

This work reduces the disadvantages of Bacillus subtilis during fermentation by regulating genes involved in spore formation and autolysis. Then, optimizing intracellular redox homeostasis through Rex protein mitigated the detrimental effects of NADH produced by the glycolytic metabolic pathway on the process of AC production. Subsequently, multiple pathways that compete with AC production are blocked to optimize carbon flux allocation. Finally, the population cell density-induced promoter was used to enhance the AC synthesis pathway. Fermentation was carried out in a 5-L bioreactor using bagasse lignocellulosic hydrolysate, resulting in a final titer of 64.3 g/L, which was 89.5% of the theoretical yield.

Conclusions

The recombinant strain BSMAY-4-PsrfA provides an economical and efficient strategy for large-scale industrial production of acetoin.

Accelerated strain construction and characterization of C. glutamicum protein secretion by laboratory automation

Secretion of bacterial proteins into the culture medium simplifies downstream processing by avoiding cell disruption for target protein purification. However, a suitable signal peptide for efficient secretion needs to be identified, and currently, there are no tools available to predict optimal combinations of signal peptides and target proteins. The selection of such a combination is influenced by several factors, including protein biosynthesis efficiency and cultivation conditions, which both can have a significant impact on secretion performance. As a result, a large number of combinations must be tested. Therefore, we have developed automated workflows allowing for targeted strain construction and secretion screening using two platforms. Key advantages of this experimental setup include lowered hands-on time and increased throughput. In this study, the automated workflows were established for the heterologous production of Fusarium solani f. sp. pisi cutinase in Corynebacterium glutamicum. The target protein was monitored in culture supernatants via enzymatic activity and split GFP assay. Varying spacer lengths between the Shine-Dalgarno sequence and the start codon of Bacillus subtilis signal peptides were tested. Consistent with previous work on the secretory cutinase production in B. subtilis, a ribosome binding site with extended spacer length to up to 12 nt, which likely slows down translation initiation, does not necessarily lead to poorer cutinase secretion by C. glutamicum. The best performing signal peptides for cutinase secretion with a standard spacer length were identified in a signal peptide screening. Additional insights into the secretion process were gained by monitoring secretion stress using the C. glutamicum K9 biosensor strain. KEY POINTS: • Automated workflows for strain construction and screening of protein secretion • Comparison of spacer, signal peptide, and host combinations for cutinase secretion • Signal peptide screening for secretion by C. glutamicum using the split GFP assay.

Development of an auto-inducible expression system by nitrogen sources switching based on the nitrogen catabolite repression regulation

BACKGROUND

The construction of protein expression systems is mainly focused on carbon catabolite repression and quorum-sensing systems. However, each of these regulatory modes has an inherent flaw, which is difficult to overcome. Organisms also prioritize using different nitrogen sources, which is called nitrogen catabolite repression. To date, few gene regulatory systems based on nitrogen catabolite repression have been reported.

RESULTS

In this study, we constructed a nitrogen switching auto-inducible expression system (NSAES) based on nitrogen catabolite regulation and nitrogen utilization in Aspergillus nidulans. The P_niaD promoter that is highly induced by nitrate and inhibition by ammonia was used as the promoter. Glucuronidase was the reporter protein. Glucuronidase expression occurred after ammonium was consumed in an ammonium and nitrate compounding medium, achieving stage auto-switching for cell growth and gene expression. This system maintained a balance between cell growth and protein production to maximize stress products. Expressions of glycosylated and secretory proteins were successfully achieved using this auto-inducible system.

CONCLUSIONS

We described an efficient auto-inducible protein expression system based on nitrogen catabolite regulation. The system could be useful for protein production in the laboratory and industrial applications. Simultaneously, NSAES provides a new auto-inducible expression regulation mode for other filamentous fungi.

Efficient D-allulose synthesis under acidic conditions by auto-inducing expression of the tandem D-allulose 3-epimerase genes in Bacillus subtilis

BACKGROUND

D-allulose, a hexulose monosaccharide with low calorie content and high sweetness, is commonly used as a functional sugar in food and nutrition. However, enzyme preparation of D-allulose from D-frutose was severely hindered by the non-enzymatic browning under alkaline and high-temperature, and the unnecessary by-products further increased the difficulties in separation and extraction for industrial applications. Here, to address the above issue during the production process, a tandem D-allulose 3-epimerase (DPEases) isomerase synergistic expression strategy and an auto-inducible promoter engineering were levered in Bacillus subtilis 168 (Bs168) for efficient synthesis of D-allulose under the acidic conditions without browning.

RESULTS

First, based on the dicistron expression system, two DPEases with complementary functional characteristics from Dorea sp. CAG:317 (DSdpe) and Clostridium cellulolyticum H10 (RCdpe) were expressed in tandem under the promoter HpaII in one cell. A better potential strain Bs168/pMA5-DSdpe-RCdpe increases enzyme activity to 18.9 U/mL at acidic conditions (pH 6.5), much higher than 17.2 and 16.7 U/mL of Bs168/pMA5-DSdpe and Bs168/pMA5-RCdpe, respectively. Subsequently, six recombinant strains based on four constitutive promoters were constructed in variable expression cassettes for improving the expression level of protein. Among those engineered strains, Bs168/pMA5-P_spoVG-DSdpe-P_srfA-RCdpe exhibited the highest enzyme activity with 480.1 U/mL on fed-batch fermentation process in a 5 L fermenter at pH 6.5, about 2.1-times higher than the 228.5 U/mL of flask fermentation. Finally, the maximum yield of D-allulose reached as high as 163.5 g/L at the fructose concentration (50% w/v) by whole-cell biocatalyst.

CONCLUSION

In this work, the engineered recombinant strain Bs168/pMA5-P_spoVG-DSdpe-P_srfA-RCdpe was demonstrated as an effective microbial cell factory for the high-efficient synthesis of D-allulose without browning under acidic conditions. Based on the perspectives from this research, this strategy presented here also made it possible to meet the requirements of the industrial hyper-production of other rare sugars under more acidic conditions in theory.

An operator-based expression toolkit for Bacillus subtilis enables fine-tuning of gene expression and biosynthetic pathway regulation

A gene regulatory system is an important tool for the engineering of biosynthetic pathways of organisms. Here, we report the development of an inducible-ON/OFF regulatory system using a malO operator as a key element. We identified and modulated sequence, position, numbers, and spacing distance of malO operators, generating a series of activating or repressive promoters with tunable strength. The stringency and robustness are both guaranteed in this system, a maximal induction factor of 790-fold was achieved, and nine proteins from different organisms were expressed with high yields. This system can be utilized as a gene switch, promoter enhancer, or metabolic valve in synthetic biology applications. This operator-based engineering strategy can be employed for developing similar regulatory systems in different microorganisms.

Genetic elements are key components of metabolic engineering and synthetic biological applications, allowing the development of organisms as biosensors and for manufacturing valuable chemicals and protein products. In contrast to the gram-negative model bacterium Escherichia coli, the gram-positive model bacterium Bacillus subtilis lacks such elements with precise and flexible characteristics, which is a great barrier to employing B. subtilis for laboratory studies and industrial applications. Here, we report the development of a malO-based genetic toolbox that is derived from the operator box in the malA promoter, enabling gene regulation via compatible “ON” and “OFF” switches. This engineered toolbox combines promoter-based mutagenesis and host-specific metabolic engineering of transactivation components upon maltose induction to achieve stringent, robust, and homogeneous gene regulation in B. subtilis. We further demonstrate the synthetic biological applications of the toolbox by utilizing these genetic elements as a gene switch, a promoter enhancer, and an ON-OFF dual-control device in biosynthetic pathway optimization. Collectively, this regulatory system provides a comprehensive genetic toolbox for controlling the expression of genes in biosynthetic pathways and regulatory networks to optimize the production of valuable chemicals and proteins in B. subtilis.

Development of a novel expression system in lactic acid bacteria controlled by a broad-host-range promoter PsrfA

BACKGROUND

Latic acid bacteria (LAB) are exploited for development of gene expression system owing to its health promoting properties and a high degree of safety status. Most of the expression systems were constructed in Lactobacillus lactis with inducible promoters. It is necessary to exploit novel promoters to develop LAB host platforms which are indispensable in dairy and health application to satisfy the production demand of increased number of target-genes. Previously, promoter P_srfA had been displayed broad host range and used to construct auto-inducible expression system in B. subtilis and E. coli. In this work, the feasibility of P_srfA in LAB was estimated.

RESULTS

Plasmid with the green fluorescent protein (GFP) inserting downstream of P_srfA was transformed into L. casei 5257, L. plantarum 97, L. fermentum 087 and Weissella confusa 10, respectively. The recombinant strains grew well and displayed different fluorescence which could be detected by spectrophotometer and laser scanning confocal microscope. Moreover, the promoter activity was strain- specifically influenced by particular carbon and nitrogen sources. Heterologous laccase CotA could be expressed by P_srfA in L. casei 5257-05 and L. plantarum 97-06. By adjusting the pH value from 4.5 to 6.5 during incubation, the CotA activity detected from L. plantarum 97-05 and L. casei 5257-05 was increased by 137.7% and 61.5%, respectively. Finally, the fermentation pH was variably up-regulated along with the production of NADH oxidase which was controlled by the P_srfA and its derivative mutated with core regions.

CONCLUSIONS

These data suggested that P_srfA was valid for gene expression in different species of LAB. Moreover, P_srfA could be used as an attractive candidate for fine-tuning gene expression in a broad range of prokaryotic expression plants.

Bacterial two-component systems as sensors for synthetic biology applications

Two-component systems (TCSs) are a ubiquitous family of signal transduction pathways that enable bacteria to sense and respond to diverse physical, chemical, and biological stimuli outside and inside the cell. Synthetic biologists have begun to repurpose TCSs for applications in optogenetics, materials science, gut microbiome engineering, and soil nutrient biosensing, among others. New engineering methods including genetic refactoring, DNA-binding domain swapping, detection threshold tuning, and phosphorylation cross-talk insulation are being used to increase the reliability of TCS sensor performance and tailor TCS signaling properties to the requirements of specific applications. There is now potential to combine these methods with large-scale gene synthesis and laboratory screening to discover the inputs sensed by many uncharacterized TCSs and develop a large new family of genetically-encoded sensors that respond to an unrivaled breadth of stimuli.

Efficient, Flexible Autoinduction Expression Systems with Broad Initiation in Bacillus subtilis

Low expression levels and inflexible induction initiation have been the main obstacles to produce proteins using bacterial quorum sensing (QS). The typical QS system in Bacillus subtilis, ComQXPA, activates the promoter P_srfA using ComX and ComA as an auto-inducer and a promoter activator, respectively. Here, we developed a series of flexible autoinduction expression systems in B. subtilis WB600 based on ComQXPA using a super-folder green fluorescent protein as the reporter. The -35 region of P_srfA was replaced with corresponding conserved sequences of σA-dependent promoters, yielding P₁ with 85% enhanced strength. We then applied a semi-rational design within the spacer between the -35 and -15 regions of P₁ to generate the QS promoter P_S1E, which generated 8.22-fold more expression than P_srfA. Based on P_S1E, we finally obtained three types of autoinduction expression systems with initiation ranging from 1.5-9.5 h by optimizing the combination of the promoters for ComX and ComA. The yield of Bacillus deramificans pullulanase generated using autoinduction expression systems in B. subtilis reached 80.2 U/mL, which was 36% more than that of the most powerful constitutive promoter P₅₆₆. Flexible autoinduction expression systems with diverse dynamic features have considerable potential for improving protein expression and metabolite production in B. subtilis.

An overview and future prospects of recombinant protein production in Bacillus subtilis

Bacillus subtilis is a well-characterized Gram-positive bacterium and a valuable host for recombinant protein production because of its efficient secretion ability, high yield, and non-toxicity. Here, we comprehensively review the recent studies on recombinant protein production in B. subtilis to update and supplement other previous reviews. We have focused on several aspects, including optimization of B. subtilis strains, enhancement and regulation of expression, improvement of secretion level, surface display of proteins, and fermentation optimization. Among them, optimization of B. subtilis strains mainly involves undirected chemical/physical mutagenesis and selection and genetic manipulation; enhancement and regulation of expression comprises autonomous plasmid and integrated expression, promoter regulation and engineering, and fine-tuning gene expression based on proteases and molecular chaperones; improvement of secretion level predominantly involves secretion pathway and signal peptide screening and optimization; surface display of proteins includes surface display of proteins on spores or vegetative cells; and fermentation optimization incorporates medium optimization, process condition optimization, and feeding strategy optimization. Furthermore, we propose some novel methods and future challenges for recombinant protein production in B. subtilis.Key points• A comprehensive review on recombinant protein production in Bacillus subtilis.• Novel techniques facilitate recombinant protein expression and secretion.• Surface display of proteins has significant potential for different applications.

The multifunctionality of expression systems in Bacillus subtilis: Emerging devices for the production of recombinant proteins

Bacillus subtilis is a successful host for producing recombinant proteins. Its GRAS (generally recognized as safe) status and its remarkable innate ability to absorb and incorporate exogenous DNA into its genome make this organism an ideal platform for the heterologous expression of bioactive substances. The factors that corroborate its value can be attributed to the scientific knowledge obtained from decades of study regarding its biology that has fostered the development of several genetic engineering strategies, such as the use of different plasmids, engineering of constitutive or double promoters, chemical inducers, systems of self-inducing expression with or without a secretion system that uses a signal peptide, and so on. Tools that enrich the technological arsenal of this expression platform improve the efficiency and reduce the costs of production of proteins of biotechnological importance. Therefore, this review aims to highlight the major advances involving recombinant expression systems developed in B. subtilis, thus sustaining the generation of knowledge and its application in future research. It was verified that this bacterium is a model in constant demand and studies of the expression of recombinant proteins on a large scale are increasing in number. As such, it represents a powerful bacterial host for academic research and industrial purposes.

Engineering a Bifunctional ComQXPA-PsrfA Quorum-Sensing Circuit for Dynamic Control of Gene Expression in Corynebacterium glutamicum

Corynebacterium glutamicum is an important industrial workhorse for the production of amino acids and other chemicals. However, the engineering of C. glutamicum is inflexible due to the lack of dynamic regulation tools. In this study, a quorum sensing (QS) circuit and its modulated hfq-sRNA cassette were constructed, and the dynamic control of gene expression by these bifunctional circuits was researched. First, the ComQXPA-P_srfA QS system of Bacillus subtilis was harnessed and modified to create an upregulating QS circuit, in which the transcription of genes controlled by the P_srfA promoter may be promoted at high cell density. This QS circuit successfully activated the expression of green fluorescent protein (GFP) to 6.35-fold in a cell density-dependent manner in C. glutamicum. Next, the hfq-sRNA-mediated downregulating circuit under the control of the ComQXPA-P_srfA QS system was established, and the expression of GFP was autonomously repressed by 96.1%. Next, to fine-tune these two QS circuits, a library of synthetic P_srfA based promoters was constructed, and a series of mutant P_srfAM promoters with 0.4-1.5-fold strength of native P_srfA were selected. Subsequently, the ComQXPA-P_srfAM QS circuit was utilized to upregulate the expression of red fluorescent protein, and the same QS-based hfq-sRNA system was utilized to downregulate the expression of GFP simultaneously. Last, this bifunctional ComQXPA-P_srfAM QS circuit was verified again by fine-tuning the expression of α-amylase. Therefore, the engineered ComQXPA-P_srfAM QS cassette can be applied as a novel bifunctional QS circuit to flexibly control gene expression in C. glutamicum.

Promote the expression and corrected folding of an extremely stable N-demethylase by promoter reconstruction, native environment simulation and surface design

Thermomicrobium roseum sarcosine oxidase (TrSOX) was a N-demethylase with specific substrate chiral selectivity, outstanding thermostability and environmental resistance. To promote the expression of TrSOX in Bacillus subtilis W600, the HpaII promoter of pMA5 plasmid was replaced by constitutive or inducible promoters. Through orthogonal experiment, the expression process was optimized, B. subtilis W600 cells containing pMA5-Pxyl-trSOX plasmid were cultivated until OD_600nm reached 2.0 and were then induced with 1.6% xylose at 37 °C for 2 h, and the native environment of T. roseum was simulated by heating at 80 °C, with the productivity of TrSOX increased from ~8.3 to ~66.7 μg/g wet cells; and the simulated high temperature was the key switch for the final folding. To reduce the surface hydrophobicity, a S320R mutant was built to form a hydrophilic lid around the entrance of the substrate pocket, and the yield of TrSOX (S320R) was ~163.0 μg/g wet cells, approximately 20 folds as that in the initial expression system. This mutant revealed the similar secondary structure, stability, resistance, chiral substrate selectivity and optimal reaction environment with wild type TrSOX; however, the N-demethylation activities for amino acid derivative substrates were dramatically increased, while those for hydrophobic non-amino acid compounds were repressed.

Exploration of key residues and conformational change of anti-terminator protein GlpP for ligand and RNA binding

Anti-terminator protein GlpP regulates gene expression of glycerol uptake operon at post-transcriptional level in a number of bacteria. By now, the molecular dynamics details of ligand and RNA binding by GlpP are still obscure. In this study, we employed the molecular dynamic (MD) simulation and constructed a functional verification platform of GlpP to resolve these puzzles. By combining molecular docking, MD simulation and alanine scanning mutagenesis, a ligand binding pocket consisting of R14, R104 and R157 was identified. Among these residues with positive charge, R14 was dominant for binding glycerol-3-phosphate (G3P). Moreover, the "parallel to crossed" conformational change of the predicted RNA binding region was observed in MD simulation. In this process, the interaction between R104 and E129 was crucial to trigger the conformational change. To further verify this speculation, three ligand independent mutants were obtained by error-prone PCR. The MD simulation indicated that the conformational change happened in all the three mutants, confirming the "parallel to crossed" conformational change endowed GlpP the activity of binding RNA. In recent years, as a potable biological part, anti-terminator was more and more widely used to regulate gene expression in metabolic engineering and synthetic biology. The work in this study deepened our understanding to the typical anti-terminator GlpP, contributing to the further engineering and application of this type of regulator.

Integrative expression vectors with Pgrac promoters for inducer-free overproduction of recombinant proteins in Bacillus subtilis

•

The new inducer-free integrative expression vectors could repress the reporter gene expression in the E. coli cloning strain, thereby facilitating the cloning step.

•

The expression vectors carrying IPTG-inducible Pgrac promoters allow the production of the recombinant protein at high levels in B. subtilis in the absence of the inducer.

•

The single-copy expression levels of integrative constructs, Pgrac01-bgaB, Pgrac100-bgaB, Pgrac212-bgaB could reach to % and 8%, 20.9 % and 42 % of total cellular proteins after 12 h incubation, respectively.

•

The double integration of Pgrac212-bgaB into both amyE and lacA loci resulted in BgaB expression up to 53.4 %.

Inducer-free integrative vectors are often used to create B. subtilis strains for industrial purposes, but employing strong promoters to produce high levels of recombinant proteins in B. subtilis results in high leaky expression that can hamper cloning in Escherichia coli. To overcome the problem, we used strong IPTG-inducible Pgrac promoters harboring lac operators to construct inducer-free integrative vectors able to integrate into the B. subtilis genome at either the lacA or the amyE locus, or both and examined their ability to repress the β-galactosidase (bgaB) gene in E. coli and to overexpress BgaB in B. subtilis. The Pgrac01 vectors could repress bgaB expression about 24-fold in E. coli to low background levels. The integrated Pgrac01-bgaB constructs exhibited inducer-free expression and produced 8% of total cellular proteins, only 1.25 or 1.75 times less compared with their cognates as plasmids. The stronger promoters, Pgrac100-bgaB and Pgrac212-bgaB yielded 20.9 % and 42 % of total intracellular proteins after 12 h of incubation, respectively. Incorporation of the Pgrac212-bgaB into both amyE and lacA loci resulted in BgaB expression up to 53.4 %. In conclusion, integrative vectors containing the Pgrac promoter family have great potential for inducer-free overproduction of recombinant proteins in B. subtilis.

Exploring the synthetic biology potential of bacteriophages for engineering non-model bacteria

Non-model bacteria like Pseudomonas putida, Lactococcus lactis and other species have unique and versatile metabolisms, offering unique opportunities for Synthetic Biology (SynBio). However, key genome editing and recombineering tools require optimization and large-scale multiplexing to unlock the full SynBio potential of these bacteria. In addition, the limited availability of a set of characterized, species-specific biological parts hampers the construction of reliable genetic circuitry. Mining of currently available, diverse bacteriophages could complete the SynBio toolbox, as they constitute an unexplored treasure trove for fully adapted metabolic modulators and orthogonally-functioning parts, driven by the longstanding co-evolution between phage and host.

Non-model bacteria offer unique and versatile metabolisms for synthetic biology. In this Perspective, the authors explore the limited availability of well-characterised biological parts in these species and argue that bacteriophages represent a diverse trove of orthogonal parts.

CRISPRi-Based Dynamic Regulation of Hydrolase for the Synthesis of Poly-γ-Glutamic Acid with Variable Molecular Weights

Poly-γ-glutamic acid (γ-PGA) is a decomposable polymer and has been useful in various industries. The biological functions of γ-PGA are closely linked with its molecular weight (MW). In this study, we established an efficient method to produce variable MWs of γ-PGA from renewable biomass (Jerusalem artichoke) by Bacillus amyloliquefaciens. First, a systematic engineering strategy was proposed in B. amyloliquefaciens to construct an optimal platform for γ-PGA overproduction, in which 24.95 g/L γ-PGA generation was attained. Second, 27.12 g/L γ-PGA with an MW of 20-30 kDa was obtained by introducing a γ-PGA hydrolase (pgdS) into the platform strain constructed above, which reveals a potential correlation between the expression level of pgdS and MW of γ-PGA. Then, a Clustered Regularly Interspaced Short Palindromic Repeats interference (CRISPRi) system was further designed to regulate pgdS expression levels, resulting in γ-PGA with variable MWs. Finally, a combinatorial approach based on three sgRNAs with different repression efficiencies was developed to achieve the dynamic regulation of pgdS and obtain tailor-made γ-PGA production in the MW range of 50-1400 kDa in one strain. This study illustrates a promising approach for the sustainable making of biopolymers with diverse molecular weights in one strain through the controllable expression of hydrolase using the CRISPRi system.

Advances on systems metabolic engineering of Bacillus subtilis as a chassis cell

The Gram-positive model bacterium Bacillus subtilis, has been broadly applied in various fields because of its low pathogenicity and strong protein secretion ability, as well as its well-developed fermentation technology. B. subtilis is considered as an attractive host in the field of metabolic engineering, in particular for protein expression and secretion, so it has been well studied and applied in genetic engineering. In this review, we discussed why B. subtilis is a good chassis cell for metabolic engineering. We also summarized the latest research progress in systematic biology, synthetic biology and evolution-based engineering of B. subtilis, and showed systemic metabolic engineering expedite the harnessing B. subtilis for bioproduction.

Construction of a High-Expression System in Bacillus through Transcriptomic Profiling and Promoter Engineering

Bacillus subtilis is an ideal host for secretion and expression of foreign proteins. The promoter is one of the most important elements to facilitate the high-level production of recombinant protein. To expand the repertoire of strong promoters for biotechnological applications in Bacillus species, 14 highly transcribed genes based on transcriptome profiling of B. pumilus BA06 were selected and evaluated for their promoter strength in B. subtilis. Consequently, a strong promoter P₂₀₆₉ was obtained, which could drive the genes encoding alkaline protease (aprE) and green fluorescent protein (GFP) to express more efficiency by an increase of 3.65-fold and 18.40-fold in comparison with the control promoter (P_aprE), respectively. Further, promoter engineering was applied to P₂₀₆₉, leading to a mutation promoter (P_2069M) that could increase GFP expression by 3.67-fold over the wild-type promoter (P₂₀₆₉). Moreover, the IPTG-inducible expression systems were constructed using the lac operon based on the strong promoters of P₂₀₆₉ and P_2069M, which could work well both in B. subtilis and B. pumilus. In this study, highly efficient expression system for Bacillus was constructed based on transcriptome data and promoter engineering, which provide not only a new option for recombinant expression in B. subtilis, but also novel genetic tool for B. pumilus.

An auto-inducible expression and high cell density fermentation of Beefy Meaty Peptide with Bacillus subtilis

Currently, some cases about the expression of flavor peptides with microorganisms were reported owing to the obvious advantages of biological expression over traditional methods. However, beefy meaty peptide (BMP), the focus of umami peptides, has neither been concerned in its safe expression nor its overproduction in fermenter. In this study, multi-copy BMP (8BMP) was successfully auto-inducibly expressed and efficiently produced in Bacillus subtilis 168. First, 8BMP was successfully auto-inducibly expressed with srfA promoter in B. subtilis 168. Further, the efficient production of 8BMP was researched in a 5-L fermenter: the fermentation optimized by Pontryagin's maximum principle obtained the highest 8BMP yield (3.16 g/L), which was 1.2 times and 1.8 times than that of two-stage feeding cultivation (2.67 g/L) and constant-rate feeding cultivation (1.75 g/L), respectively. Overall, the auto-inducible expression of 8BMP in B. subtilis and fermentation with Pontryagin's maximum principle are conductive for overproduction of BMP and other peptides.

Broad-host-range application of the srfA promoter from Bacillus subtilis in Escherichia coli

The promoter of the srf operon (P_srfA) had been used to construct a cell-density-dependent expression system in B. subtilis in our previous work. The P_srfA and its derivative P_srfA12 showed good performance of heterologous protein expression in B. subtilis. In this work, using green fluorescent protein (GFP) and β-galactosidase (LacZ) as the reporter proteins, the host feasibility and expression characteristics of the P_srfA and P_srfA12 in E. coli were identified. The prominent green fluorescence shooted by laser scanning confocal microscope, fluorescence intensity measured by spectrophotometer and the distinct protein bands detected by SDS-PAGE demonstrated that the GFP could be largely expressed under the control of the P_srfA and P_srfA12 in the E. coli host strain of BL21 (DE3) and JM109 and the expression of GFP in strain BL21 (DE3) was much higher than that of in strain JM109. Meanwhile, the promoter P_srfA 12 was much stronger than P_srfA to the extent that the GFP controlled by P_srfA12 in strain BL21 (DE3) was leaked into the supernatant. And the fluorescence intensity detected in the supernatant of the recombinant strain BL21 (DE3) containing P_srfA12 was 10.25-fold higher than that of strain JM109 containing P_srfA. Moreover, the LacZ could also be produced by P_srfA and P_srfA12 in strain BL21 (DE3) and JM109 and the strain JM109 showed better performance than BL21 (DE3) in expressing LacZ. The LacZ activity controlled by P_srfA and P_srfA12 in JM109 were separately 2.47-fold and 2.36-fold higher than that of in strain BL21 (DE3). This work will broaden the applied range of the P_srfA and enrich the efficient toolbar for cross-species gene expression or module construction in E. coli and B. subtilis.

Promoter engineering strategies for the overproduction of valuable metabolites in microbes

Promoter engineering is an enabling technology in metabolic engineering and synthetic biology. As an indispensable part of synthetic biology, the promoter is a key factor in regulating genetic circuits and in coordinating multi-gene biosynthetic pathways. In this review, we summarized the recent progresses in promoter engineering in microbes. Specifically, the endogenous promoters are firstly discussed, followed by the statement of the influence of nucleotides exchange on the strength of promoters explored by site-selective mutagenesis. We then introduced the promoter libraries with a wide range of strength, which are constructed focusing on core promoter regions and upstream activating sequences by rational designs. Finally, the application of promoter libraries in the optimization of multi-gene metabolic pathways for high-yield production of metabolites was illustrated with a couple of recent examples.

Cell density-dependent auto-inducible promoters for expression of recombinant proteins in Pseudomonas putida

Inducible promoters such as Plac are of limited usability for industrial protein production with Pseudomonas putida. We therefore utilized cell density-dependent auto-inducible promoters for recombinant gene expression in P. putida KT2440 based on the RoxS/RoxR Quorum Sensing (QS) system of the bacterium. To this end, genetic regions upstream of the RoxS/RoxR-regulated genes ddcA (PR ox132 ) and PP_3332 (PR ox306 ) were inserted into plasmids that mediated the expression of superfolder green fluorescent protein (sfGFP) and surface displayed mCherry, confirming their promoter functionalities. Mutation of the Pribnow box of PR ox306 to the σ70 consensus sequence (PR ox3061 ) resulted in a more than threefold increase of sfGFP production. All three promoters caused cell density-dependent expression, starting transcription at optical densities (OD578 ) of approximately 1.0 (PR ox132 , PR ox306 ) or 0.7 (PR ox3061 ) as determined by RT-qPCR. The QS dependency of PR ox306 was further shown by cultivating P. putida in media that had already been used for cultivation and thus contained bacterial signal molecules. The longer P. putida had grown in these media before, the earlier protein expression in freshly inoculated P. putida appeared with PR ox306 . This confirmed previous findings that a bacterial compound accumulates within the culture and induces protein expression.

Promoter engineering enables overproduction of foreign proteins from a single copy expression cassette in Bacillus subtilis

BACKGROUND

Bacillus subtilis is developed to be an attractive expression host to produce both secreted and cytoplasmic proteins owing to its prominent biological characteristics. Chromosomal integration is a stable expression strategy while the expression level is not ideal compared with plasmid expression. Thus, to meet the requirement of protein overexpression, promoter, as one of the key elements, is important. It is necessary to obtain an ideal promoter for overproduction of foreign proteins from a single copy expression cassette.

RESULTS

The activity of promoter P_ylb was further enhanced by optimizing the - 35, - 10 core region and upstream sequence (UP) by substituting both sequences with consensus sequences. The final engineered promoter exhibited almost 26-fold in β-galactosidase (BgaB) activity and 195-fold in super-folded green fluorescent protein (sfGFP) intensity than that of WT. The two proteins account for 43% and 30% of intracellular proteins, respectively. The promoter was eventually tested by successful extracellular overproduction of Methyl Parathion Hydrolase (MPH) and Chlorothalonil hydrolytic dehalogenase (Chd) to a level of 0.3 g/L (144 U/mL) and 0.27 g/L (4.4 U/mL) on shake-flask culture condition.

CONCLUSIONS

A strong promoter was engineered for efficient chromosomally integrated expression of heterologous proteins.

Development of a novel strategy for robust synthetic bacterial promoters based on a stepwise evolution targeting the spacer region of the core promoter in Bacillus subtilis

Background

Promoter evolution by synthetic promoter library (SPL) is a powerful approach to development of functional synthetic promoters to synthetic biology. However, it requires much tedious and time-consuming screenings because of the plethora of different variants in SPL. Actually, a large proportion of mutants in the SPL are significantly lower in strength, which contributes only to fabrication of a promoter library with a continuum of strength. Thus, to effectively obtain the evolved synthetic promoter exhibiting higher strength, it is essential to develop novel strategies to construct mutant library targeting the pivotal region rather than the arbitrary region of the template promoter. In this study, a strategy termed stepwise evolution targeting the spacer of core promoter (SETarSCoP) was established in Bacillus subtilis to effectively evolve the strength of bacterial promoter.

Results

The native promoter, P_srfA, from B. subtilis, which exhibits higher strength than the strong promoter P43, was set as the parental template. According to the comparison of conservation of the spacer sequences between − 35 box and − 10 box among a set of strong and weak native promoter, it revealed that 7-bp sequence immediately upstream of the − 10 box featured in the regulation of promoter strength. Based on the conservative feature, two rounds of consecutive evolution were performed targeting the hot region of P_srfA. In the first round, a primary promoter mutation library (pPML) was constructed by mutagenesis targeting the 3-bp sequence immediately upstream of the − 10 box of the P_srfA. Subsequently, four evolved mutants from pPML were selected to construction of four secondary promoter mutation libraries (sPMLs) based on mutagenesis of the 4-bp sequence upstream of the first-round target. After the consecutive two-step evolution, the mutant P_BH4 was identified and verified to be a highly evolved synthetic promoter. The strength of P_BH4 was higher than P_srfA by approximately 3 times. Moreover, P_BH4 also exhibited broad suitability for different cargo proteins, such as β-glucuronidase and nattokinase. The proof-of-principle test showed that SETarSCoP successfully evolved both constitutive and inducible promoters.

Conclusion

Comparing with the commonly used SPL strategy, SETarSCoP facilitates the evolution process to obtain strength-evolved synthetic bacterial promoter through fabrication and screening of small-scale mutation libraries. This strategy will be a promising method to evolve diverse bacterial promoters to expand the toolbox for synthetic biology.

Electronic supplementary material

The online version of this article (10.1186/s12934-019-1148-3) contains supplementary material, which is available to authorized users.

Rational strain improvement for surfactin production: enhancing the yield and generating novel structures

Surfactin, one of the most powerful microbial surfactants, is a lipopeptide-type biosurfactant which combines interesting physicochemical properties and biological activities. However, the high cost caused by its low productivity largely limits the commercial application of surfactin. Hence, many engineered bacterium have also been used to enhance surfactin biosynthesis. This review briefly summarizes the mechanism of surfactin biosynthesis, highlighting the synthesis pathway of N-terminally attached fatty acids, and outlines the main genetic engineering strategies for improving the yield and generating novel structures of surfactin, including promoter engineering, enhancing efflux systems, modifying the transcriptional regulatory genes of surfactin synthase (srfA), genomics and transcriptomics analysis, non ribosomal peptide synthetase (NRPS) domain and combinatorial biosynthesis. Finally, we discuss the future prospects of the research on surfactin.

Genome and transcriptome analysis of Bacillus velezensis BS-37, an efficient surfactin producer from glycerol, in response to d-/l-leucine

Surfactin is one of the most widely studied biosurfactants due to its many potential applications in different fields. In the present study, Bacillus velezensis BS-37, initially identified as a strain of Bacillus subtilis, was used to efficiently produce surfactin with the addition of glycerol, an inexpensive by-product of biodiesel production. After 36 hr of growth in glycerol medium, the total surfactin concentration reached more than 1,000 mg/L, which was two times higher than that in sucrose medium. Moreover, the addition of l- and d-Leu to the culture medium had opposite effects on surfactin production by BS-37. While surfactin production increased significantly to nearly 2,000 mg/L with the addition of 10 mM l-Leu, it was dramatically reduced to about 250 mg/L with the addition of 10 mM d-Leu. To systemically elucidate the mechanisms influencing the efficiency of this biosynthesis process, we sequenced the genome of BS-37 and analyzed changes of the transcriptome in glycerol medium in response to d-/l-leucine. The RPKM analysis of the transcriptome of BS-37 showed that the transcription levels of genes encoding modular surfactin synthase, the glycerol utilization pathway, and branched-chain amino acid (BCAA) synthesis pathways were all at a relatively high level, which may offered an explanation why this strain can efficiently use glycerol to produce surfactin with a high yield. Neither l-Leu nor d-Leu had a significant effect on the expression of genes in these pathways, indicating that l-Leu plays an important role as a precursor or substrate involved in surfactin production, while d-Leu appears to act as a competitive inhibitor. The results of the present study provide new insights into the synthesis of surfactin and ways of its regulation, and enrich the genomic and transcriptomic resources available for the construction of high-producing strains.

Efficient Biosynthesis of Low-Molecular-Weight Poly-γ-glutamic Acid by Stable Overexpression of PgdS Hydrolase in Bacillus amyloliquefaciens NB

Low-molecular-weight poly-γ-glutamic acid (LMW-γ-PGA) has attracted much attention owing to its great potential in food, agriculture, medicine, and cosmetics. Current methods of LMW-γ-PGA production, including enzymatic hydrolysis, are associated with low operational stability. Here, an efficient method for stable biosynthesis of LMW-γ-PGA was conceived by overexpression of γ-PGA hydrolase in Bacillus amyloliquefaciens NB. To establish stable expression of γ-PGA hydrolase (PgdS) during fermentation, a novel plasmid pNX01 was constructed with a native replicon from endogenous plasmid p2Sip, showing a loss rate of 4% after 100 consecutive passages. Subsequently, this plasmid was applied in a screen of high activity PgdS hydrolase, leading to substantial improvements to γ-PGA titer with concomitant decrease in the molecular weight. Finally, a satisfactory yield of 17.62 ± 0.38 g/L LMW-γ-PGA with a weight-average molecular weight of 20-30 kDa was achieved by direct fermentation of Jerusalem artichoke tuber extract. Our study presents a potential method for commercial production of LMW-γ-PGA.

Construction, Model-Based Analysis, and Characterization of a Promoter Library for Fine-Tuned Gene Expression in Bacillus subtilis

Promoters are among the most-important and most-basic tools for the control of metabolic pathways. However, previous research mainly focused on the screening and characterization of some native promoters in Bacillus subtilis. To develop a broadly applicable promoter system for this important platform organism, we created a de novo synthetic promoter library (SPL) based on consensus sequences by analyzing the microarray transcriptome data of B. subtilis 168. A total of 214 potential promoters spanning a gradient of strengths was isolated and characterized by a green fluorescence assay. Among these, a detailed intensity analysis was conducted on nine promoters with different strengths by reverse-transcription polymerase chain reaction (RT-PCR) and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Furthermore, reconstructed promoters and promoter cassettes (tandem promoter cluster) were designed via statistical model-based analysis and tandem dual promoters, which showed strength that was increased 1.2- and 2.77-fold compared to that of promoter P43, respectively. Finally, the SPL was employed in the production of inosine and acetoin by repressing and over-expressing the relevant metabolic pathways, yielding a 700% and 44% increase relative to the respective control strains. This is the first report of a de novo synthetic promoter library for B. subtilis, which is independent of any native promoter. The strategy of improving and fine-tuning promoter strengths will contribute to future metabolic engineering and synthetic biology projects in B. subtilis.

Bacillus subtilis highly efficient protein expression systems that are chromosomally integrated and controllable by glucose and rhamnose

To achieve rhamnose-inducible efficient protein expression in Bacillus subtilis, we assembled the strong promoters of B. subtilis cdd and ylbP genes and the regulatory region (PrhaEW) of B. subtilis rhaEWRBMA operon, whose transcription is induced by rhamnose and repressed by glucose, to produce various hybrid constructs. These constructs were evaluated using B. subtilis strains carrying a fusion of each construct to the gene encoding a mutated green fluorescent protein in the chromosome. When these strains were cultivated in the presence of glucose or rhamnose, the strain carrying a fusion of a partial PrhaEW region, lacking the intrinsic Shine-Dalgarno (SD) sequence, and the ylbP SD sequence most strictly controlled the promoter activity depending on sugar species. Moreover, the strain carrying a fusion of the cdd core promoter and the ylbP SD sequence showed the highest promoter activity when it was cultivated in the presence of glucose until the late stationary phase. Abbreviations: RNAP: RNA polymerase; cre: catabolite-responsive element; SD: Shine-Dalgarno; PAGE: polyacrylamide gel electrophoresis; GFP: green fluorescent protein; OD₆₀₀: optical density at 600 nm; LB: Luria-Bertani; a.u.: arbitrary unit; SDS: sodium dodecyl sulfate.

Stepwise modifications of genetic parts reinforce the secretory production of nattokinase in Bacillus subtilis

Nattokinase (NK) is an important serine‐protease with direct fibrinolytic activity involving the prevention of cardiovascular disease as an antithrombotic agent. Dozens of studies have focused on the characterization of intrinsic novel promoters and signal peptides to the secretory production of recombinant proteins in Bacillus subtilis. However, intrinsic genetic elements have several drawbacks, which cannot mediate the production of NK to the desired level. In this study, the genetic elements, which were used to overproduce the recombinant secretory NK, were rationally modified in B. subtilis in a stepwise manner. The first step was to select a suitable signal peptide for the highly efficient secretion of NK. By comparison of the secretory levels mediated by two different signal peptides, which were encoded by the genes of a minor extracellular protease epr (SP_epr) and cell‐wall associated protease wapA (SP_wapA), respectively, SP_wapA was verified as the superior secretory element. Second, P04, which was a synthetic promoter screened from an array of mutants based on the promoter cloned from the operon of a quorum‐sensing associated gene srfA (P_srfA), was paired to SP_wapA. The secretory level of NK was obviously augmented by the combination of these two genetic elements. Third, the cis‐acting element CodY‐binding sequence positioned at the 5′UTR was deleted (yielding P08), and thus the secretory level was significantly elevated. The activity of NK, which was defined as fibrinolytic units (FU), reached to a level of 270 FU ml⁻¹. Finally, the superior genetic element composed of P08 and SP_wapA was utilized to overproduce NK in the host B. subtilis WB800, which was able to produce the secretory NK at 292 FU ml⁻¹. The strategy established in this study can not only be used to overproduce NK in B. subtilis but also might be a promising pipeline to modify the genetic element for the synthetic secretory system.

Sugarcane growth and nutrition levels are differentially affected by the application of PGPR and cane waste

Mineral and organic fertilization can be optimized by using rhizobacteria which increases dry matter, yield, and nutrients in the soil and plant, among the other biological inputs. However, the discovery of single microbes or a consortium that can benefit plants has been a challenge. In this context, this study aimed to evaluate the effects of Bacillus subtilis and Bacillus pumilus combined with mineral fertilization and sugar and alcohol industry by‐products in presprouted and the initial growth phase of sugar cane seedlings. The study was carried out in two phases. Phase 1 included presprouted seedlings with T1 =  untreated control, T2 =  B. subtilis, T3 =  B. pumilus, and T4 =  B. subtilis + B. pumilus treatments. Phase 2 included the same treatments with four types of fertilization: F1 =  mineral fertilization, F2 =  mineral fertilization + vinasse, F3 =  mineral fertilization + filter cake, and F4 =  mineral fertilization + filter cake compost. Of the phase 1 treatments, T2 (B. subtilis) was the best promoter of root growth and the total dry matter compared to the control with an increase of 23.0% compared to the control. In phase 2, B. pumilus application, increased the total dry matter by 13%, the number of tillers by 37%, and the diameter of the tillers by 48% when combined with mineral fertilization. The combined application of B. subtilis and B. pumilus increased the phosphorus content by 13% in soil treated with mineral fertilization and filter cake compost. The results of the this study strongly suggest that the use of B. subtilis and B. pumilus together with these by‐products can improve soil fertility parameters and decrease adverse effects associated with vinasse fertilization, in addition to providing shoot and root growth and providing collective synergy for a high yield of sugarcane production with environmental benefits.

Molecular Basis of Stationary Phase Survival and Applications

Stationary phase is the stage when growth ceases but cells remain metabolically active. Several physical and molecular changes take place during this stage that makes them interesting to explore. The characteristic proteins synthesized in the stationary phase are indispensable as they confer viability to the bacteria. Detailed knowledge of these proteins and the genes synthesizing them is required to understand the survival in such nutrient deprived conditions. The promoters, which drive the expression of these genes, are called stationary phase promoters. These promoters exhibit increased activity in the stationary phase and less or no activity in the exponential phase. The vectors constructed based on these promoters are ideal for large-scale protein production due to the absence of any external inducers. A number of recombinant protein production systems have been developed using these promoters. This review describes the stationary phase survival of bacteria, the promoters involved, their importance, regulation, and applications.