Facile and eco-friendly fabrication of biocompatible hydrogel containing CuS@Ser NPs with mechanical flexibility and photothermal antibacterial activity to promote infected wound healing

Multifunctional Microneedle Patch Based on Metal-Phenolic Network with Photothermal Antimicrobial, ROS Scavenging, Immunomodulatory, and Angiogenesis for Programmed Treatment of Diabetic Wound Healing

In diabetic patients with skin injuries, bacterial proliferation, accumulation of reactive oxygen species (ROS) in the tissues, and impaired angiogenesis make wound healing difficult. Therefore, eliminating bacteria, removing ROS, and promoting angiogenesis are necessary for treating acute diabetic wounds. In this study, benefiting from the ability of polyphenols to form a metal-phenolic network (MPN) with metal ions, TA-Eu MPN nanoparticles (TM NPs) were synthesized. The prepared photothermal agent CuS NPs and TM NPs were then loaded onto the supporting base and needle tips of PVA/HA (PH) microneedles, respectively, to obtain PH/CuS/TM microneedles. Antibacterial experiments showed that microneedles loaded with CuS NPs could remove bacteria by the photothermal effect. In vitro experiments showed that the microneedles could effectively scavenge ROS, inhibit macrophage polarization to the M1 type, and induce polarization to the M2 type as well as have the ability to promote vascular endothelial cell migration and angiogenesis. Furthermore, in vivo experiments showed that PH/CuS/TM microneedles accelerated wound healing by inhibiting pro-inflammatory cytokines and promoting angiogenesis in a diabetic rat wound model. Therefore, PH/CuS/TM microneedles have efficient antibacterial, ROS scavenging, anti-inflammatory, immunomodulatory, and angiogenic abilities and hold promise as wound dressings for treating acute diabetic wounds.

Multifunctional hydrogels based on photothermal therapy: A prospective platform for the postoperative management of melanoma

Preventing the recurrence of melanoma after surgery and accelerating wound healing are among the most challenging aspects of melanoma management. Photothermal therapy has been widely used to treat tumors and bacterial infections and promote wound healing. Owing to its efficacy and specificity, it may be used for postoperative management of tumors. However, its use is limited by the uncontrollable distribution of photosensitizers and the likelihood of damage to the surrounding normal tissue. Hydrogels provide a moist environment with strong biocompatibility and adhesion for wound healing owing to their highly hydrophilic three-dimensional network structure. In addition, these materials serve as excellent drug carriers for tumor treatment and wound healing. It is possible to combine the advantages of both of these agents through different loading modalities to provide a powerful platform for the prevention of tumor recurrence and wound healing. This review summarizes the design strategies, research progress and mechanism of action of hydrogels used in photothermal therapy and discusses their role in preventing tumor recurrence and accelerating wound healing. These findings provide valuable insights into the postoperative management of melanoma and may guide the development of promising multifunctional hydrogels for photothermal therapy.

Green synthesis-inspired antibacterial, antioxidant and adhesive hydrogels with ultra-fast gelation and hemostasis for promoting infected skin wound healing

Bacterial infections are a serious threat to wound healing and skin regeneration. In recent years, photothermal therapy (PTT) has become one of the most promising tools in the treatment of infectious diseases. However, wound dressings with photo-responsive properties are currently still limited by the difficulties of biosafety and thermal stability brought by the introduction of photosensitizers or photothermal agents. Therefore, how to improve the therapeutic efficiency and biosafety from material design is still a major challenge at present. In this study, the carboxymethyl chitosan (CMCS) and protocatechuic aldehyde (PA) hydrogels based on horseradish peroxidase (HRP) and hydrogen peroxide (H2O2) enzymatic catalysis was developed. Therein, HRP and H2O2 catalyzed cross-linking while polymerizing PA, which not only endowed the hydrogels with photothermal responsiveness but also with good biosafety through this enzyme-catalyzed green approach. Meanwhile, the hydrogels possessed highly efficient bacteriostatic ability with the assistance of near infrared (NIR). Moreover, the ultra-rapid gelation, strong tissue adhesion, high swelling ability, good antioxidant property and hemostatic property of the CMCS-PA hydrogels based on HRP/H2O2 enzymatic catalysis were suitable for the treatment of skin wounds. Meanwhile, NIR-assistant CMCS-PA hydrogels based on HRP/H2O2 enzymatic catalysis reduced inflammation, decreased bacterial infection, and promoted collagen deposition and angiogenesis, which showed remarkable therapeutic effects in a skin wound infection model. All results indicate that this green approach to introduce photothermal property by HRP-catalyzed PA polymerization endows the hydrogels with efficient photothermal conversion efficiency, suggesting that they are promising to provide new options for replacing photothermal agents and photosensitizers. STATEMENT OF SIGNIFICANCE: In recent years, wound dressings with photo-responsive properties are currently still limited by the difficulties of biosafety and thermal stability brought by the introduction of agent photosensitizers or photothermal agents. In this study, the carboxymethyl chitosan and protocatechuic aldehyde hydrogels based on horseradish peroxidase and hydrogen peroxide enzymatic catalysis was developed. The photothermal properties of hydrogels were transformed from absent to present just by horseradish peroxidase-catalyzed protocatechuic aldehyde polymerization in a green approach. Meanwhile, the hydrogels possessed highly efficient bacteriostatic ability with the assistance of near infrared. The green approach of introducing photothermal properties from material design solves the biosafety challenge. Therefore, this study is expected to provide new options for alternative photothermal agents and photosensitizers.

NIR light-activated nanocomposites combat biofilm formation and enhance antibacterial efficacy for improved wound healing

Nanoparticle-based therapies are emerging as a pivotal frontier in biomedical research, showing their potential in combating infections and facilitating wound recovery. Herein, selenium-tellurium dopped copper oxide nanoparticles (SeTe-CuO NPs) with dual photodynamic and photothermal properties were synthesized, presenting an efficient strategy for combating bacterial infections. In vitro evaluations revealed robust antibacterial activity of SeTe-CuO NPs, achieving up to 99% eradication of bacteria and significant biofilm inhibition upon near-infrared (NIR) irradiation. Moreover, in vivo studies demonstrated accelerated wound closure upon treatment with NIR-activated SeTe-CuO NPs, demonstrating their efficacy in promoting wound healing. Furthermore, SeTe-CuO NPs exhibited rapid bacterial clearance within wounds, offering a promising solution for wound care. Overall, this versatile platform holds great promise for combating multidrug-resistant bacteria and advancing therapeutic interventions in wound management.

Precise healing of oral and maxillofacial wounds: tissue engineering strategies and their associated mechanisms

Precise healing of wounds in the oral and maxillofacial regions is usually achieved by targeting the entire healing process. The rich blood circulation in the oral and maxillofacial regions promotes the rapid healing of wounds through the action of various growth factors. Correspondingly, their tissue engineering can aid in preventing wound infections, accelerate angiogenesis, and enhance the proliferation and migration of tissue cells during wound healing. Recent years, have witnessed an increase in the number of researchers focusing on tissue engineering, particularly for precise wound healing. In this context, hydrogels, which possess a soft viscoelastic nature and demonstrate exceptional biocompatibility and biodegradability, have emerged as the current research hotspot. Additionally, nanofibers, films, and foam sponges have been explored as some of the most viable materials for wound healing, with noted advantages and drawbacks. Accordingly, future research is highly likely to explore the application of these materials harboring enhanced mechanical properties, reduced susceptibility to external mechanical disturbances, and commendable water absorption and non-expansion attributes, for superior wound healing.

Regenerated silk fibroin coating stable liquid metal nanoparticles enhance photothermal antimicrobial activity of hydrogel for wound infection repair

The integration of liquid metal (LM) and regenerated silk fibroin (RSF) hydrogel holds great potential for achieving effective antibacterial wound treatment through the LM photothermal effect. However, the challenge of LM's uncontrollable shape-deformability hinders its stable application. To address this, we propose a straightforward and environmentally-friendly ice-bath ultrasonic treatment method to fabricate stable RSF-coated eutectic gallium indium (EGaIn) nanoparticles (RSF@EGaIn NPs). Additionally, a double-crosslinked hydrogel (RSF-P-EGaIn) is prepared by incorporating poly N-isopropyl acrylamide (PNIPAAm) and RSF@EGaIn NPs, leading to improved mechanical properties and temperature sensitivity. Our findings reveal that RSF@EGaIn NPs exhibit excellent stability, and the use of near-infrared (NIR) irradiation enhances the antibacterial behavior of RSF-P-EGaIn hydrogel in vivo. In fact, in vivo testing demonstrates that wounds treated with RSF-P-EGaIn hydrogel under NIR irradiation completely healed within 14 days post-trauma infection, with the formation of new skin and hair. Histological examination further indicates that RSF-P-EGaIn hydrogel promoted epithelialization and well-organized collagen deposition in the dermis. These promising results lay a solid foundation for the future development of drug release systems based on photothermal-responsive hydrogels utilizing RSF-P-EGaIn.

Biocompatible copper formate-based nanoparticles with strong antibacterial properties for wound healing

Copper-based antibacterial materials have emerged as a potential alternative for combating bacterial infections, which continue to pose significant health risks. Nevertheless, the use of copper-based nanoparticles as antibacterial agents has faced challenges due to their toxicity towards cells and tissues. To overcome this obstacle, we propose a new approach using a contact-active copper-based nanoparticles called polydopamine (PDA)-coated copper-amine (Cuf-TMB@PDA). The positively charged surface of Cuf-TMB@PDA enables efficient targeting of negatively charged bacteria, allowing controlled release of Cu(II) into the bacterial cell membrane. Moreover, Cuf-TMB@PDA exhibits similar ·OH signals as Cuf-TMB suspensions in previous work. In cytotoxicity assays conducted over 72 h, Cuf-TMB@PDA demonstrated an efficacy of 98.56%, while releasing lower levels of Cu(II) that were less harmful to cells, resulting in enhanced antimicrobial effects. These antimicrobial properties are attributed to the synergistic effects of charge-contact activity of PDA, controlled release of Cu(II), and free radicals. Subsequent in vivo experiments confirmed the strong antimicrobial potency of Cuf-TMB@PDA and its ability to promote wound healing.

Photothermal therapy of copper incorporated nanomaterials for biomedicine

Studies have reported on the significance of copper incorporated nanomaterials (CINMs) in cancer theranostics and tissue regeneration. Given their unique physicochemical properties and tunable nanostructures, CINMs are used in photothermal therapy (PTT) and photothermal-derived combination therapies. They have the potential to overcome the challenges of unsatisfactory efficacy of conventional therapies in an efficient and non-invasive manner. This review summarizes the recent advances in CINMs-based PTT in biomedicine. First, the classification and structure of CINMs are introduced. CINMs-based PTT combination therapy in tumors and PTT guided by multiple imaging modalities are then reviewed. Various representative designs of CINMs-based PTT in bone, skin and other organs are presented. Furthermore, the biosafety of CINMs is discussed. Finally, this analysis delves into the current challenges that researchers face and offers an optimistic outlook on the prospects of clinical translational research in this field. This review aims at elucidating on the applications of CINMs-based PTT and derived combination therapies in biomedicine to encourage future design and clinical translation.