Impact of antagonistic muscle co-contraction on in vivo knee contact forces

Muscle activation patterns and gait changes in unilateral knee osteoarthritis patients: a comparative study with healthy controls

The objective of this study was to investigate the differences in muscle activation and kinematic parameters between patients with unilateral knee osteoarthritis (OA) and healthy individuals. Additionally, the study aimed to determine the correlation between muscle activation and kinematic parameters with knee OA symptoms. Participants with unilateral knee OA (n = 32) and healthy individuals (n = 32) completed the gait test. Electromyography (EMG) and motion capture were employed to collect muscle activation data and kinematic parameters. Spearman's correlation coefficient was used to analysis the correlation between BMI, symptomatic side EMG parameters, kinematic parameters, and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) scores. Furthermore, a multiple linear regression analysis of WOMAC pain was also conducted. The peak root mean square, integrated electromyography, and co-activation index (CCI) were increased bilaterally in the unilateral knee OA group compared to the healthy group. Furthermore, these values were higher on the symptomatic side than on the asymptomatic side. Compared with the healthy group, the knee OA group had lower gait speed, decreased stride length and cadence on bilateral sides, longer total stance time and double-stance time, and shorter single stance time and swing time. The maximum knee flexion angle of the swing phase on the symptomatic side of the knee OA group was smaller than that on the asymptomatic side and healthy group. Changes in EMG and gait parameters on the symptomatic side correlated with WOMAC scores. The main factors influencing WOMAC pain were the CCI values of the lateral femoral and biceps femoris muscles and gait speed. Muscle activation and kinematic parameters in the lower limbs of patients with unilateral knee OA were altered bilaterally during walking. These alterations on the symptomatic side were associated with knee OA-related pain. ChiCTR2200064958. Date of registration: 2022-10-24. Key Points • Unilateral symptomatic knee OA leads to bilateral alterations in muscle activation and gait parameters. • Symptomatic muscle activation and gait parameter changes in knee OA patients are associated with knee OA symptoms. • Correcting abnormal muscle activation conditions and gait training may reduce knee OA-related pain.

Neuromuscular control strategies of the lower limb during a typical Tai Chi brush knee and twist step in practitioners with and without knee pain: a pilot study

As a complex movement, Tai Chi (TC) could be challenging for knee control, and the compensatory changes in TC biomechanics of knee pain patients are unknown. The Brush Knee and Twist Step (BKTS) is a typical TC movement that involves basic leg motion repeated in the whole TC. This pilot study examined electromyography and retro-reflective marker trajectory data to investigate neuromuscular control strategies of the lower extremity during BKTS in TC practitioners with and without knee pain. Twelve experienced TC practitioners with (n = 6) and without knee pain (n = 6) participated. Our results revealed that knee pain practitioners presented muscle imbalance in the vastus medialis-vastus lateralis and vastus lateralis-biceps femoris, and poor alignment of the knee with the toes in TC lunge. Additionally, they adaptively developed rigid coordination strategies, showing higher levels of lower limb muscle co-contraction and activity compared to controls. Training programs for TC practitioners with knee pain should be designed to modify both abnormal muscle synergy patterns and incorrect lunge during TC, which may improve exercise safety.

Changes in co-contraction magnitude during functional tasks following anterior cruciate ligament reconstruction: A systematic review

BACKGROUND

Anterior cruciate ligament reconstruction (ACLR) is a common orthopedic surgery procedure whose incidence has increased over the past few decades. Nevertheless, it is believed that neuromuscular control remains altered from the early stages after ACLR to later years. Therefore, the aim of this study was to systematically evaluate the magnitude of co-contraction during functional tasks in subjects with unilateral ACLR.

METHODS

A systematic review design was followed. The search strategy was conducted in PubMed, Scopus, EBSCO, PEDro, Cochrane Library, and Web of Science databases from inception to March 2024. The inclusion criteria involved studies using electromyography (EMG) data to calculate muscle pair activation via the co-contraction index (CCI) in ACLR individuals during functional tasks. The Preferred Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were followed, and study quality was evaluated using National Institutes of Health (NIH) Study Quality Assessment Tools.

RESULTS

The search strategy found a total of 792 studies, of which 15 were included in this systematic review after reviewing the eligibility criteria. The magnitude of co-contraction was assessed in a total of 433 ACLR individuals and 206 controls during functional tasks such as hop, drop-land, step-up/step-down, and gait. Overall, approximately 79.6% of individuals who had undergone ACLR exhibited increased levels of co-contraction magnitude in the ACLR limb, while 8.5% showed low co-contraction levels.

CONCLUSIONS

The findings of the review suggest that, during functional tasks, most individuals who have undergone ACLR exhibit changes of co-contraction magnitude in the involved limb.

Joint contact forces during semi-recumbent seated cycling

Semi-recumbent cycling performed from a wheelchair is a popular rehabilitation exercise following spinal cord injury (SCI) and is often paired with functional electrical stimulation. However, biomechanical assessment of this cycling modality is lacking, even in unimpaired populations, hindering the development of personalised and safe rehabilitation programs for those with SCI. This study developed a computational pipeline to determine lower limb kinematics, kinetics, and joint contact forces (JCF) in 11 unimpaired participants during voluntary semi-recumbent cycling using a rehabilitation ergometer. Two cadences (40 and 60 revolutions per minute) and three crank powers (15 W, 30 W, and 45 W) were assessed. A rigid body model of a rehabilitation ergometer was combined with a calibrated electromyogram-informed neuromusculoskeletal model to determine JCF at the hip, knee, and ankle. Joint excursions remained consistent across all cadence and powers, but joint moments and JCF differed between 40 and 60 revolutions per minute, with peak JCF force significantly greater at 40 compared to 60 revolutions per minute for all crank powers. Poor correlations were found between mean crank power and peak JCF across all joints. This study provides foundation data and computational methods to enable further evaluation and optimisation of semi-recumbent cycling for application in rehabilitation after SCI and other neurological disorders.

Hamstrings vibration reduces tibiofemoral compressive force following anterior cruciate ligament reconstruction

Individuals who have undergone anterior cruciate ligament reconstruction (ACLR) are at greater risk of developing knee osteoarthritis (OA). This elevated risk of knee OA is associated with high tibiofemoral (TF) compressive force, due to a combination of low knee flexion angles and increased co-contraction of the hamstrings and quadriceps during limb loading. Prolonged vibration of the hamstrings fatigues the intrafusal muscle fibers, which reduces autonomic reflexive excitation of the hamstrings and alleviates reciprocal inhibition to the quadriceps. The aim of this study was to examine the effect of prolonged hamstrings vibration on TF compressive force in individuals who have undergone ACL reconstruction. Fourteen participants with unilateral ACLR and 14 participants without knee injury performed a single-leg drop-land task before and after prolonged (20 min) vibration of the hamstrings. Peak TF compressive force, knee flexion angle, and hamstrings/quadriceps co-contraction were calculated during the deceleration phase of the drop-land task before and after vibration. The ACLR group experienced an 18% decrease in TF compressive force, a 32% increase in knee flexion angle, and a 38% decrease in hamstrings/quadriceps co-contraction after hamstrings vibration. There was no difference in any of the parameters in the noninjured group after vibration. These data suggest that acute prolonged hamstrings vibration has the potential to mitigate TF compressive force, which may protect the knee joint in the long term. Clinical significance: The results of this research are expected to lead to improved clinical care for ACLR patients because it holds promise for mitigating altered joint mechanics and perhaps slowing down the onset of posttraumatic knee osteoarthritis.

Knee kinematics are primarily determined by implant alignment but knee kinetics are mainly influenced by muscle coordination strategy

Implant malalignment has been reported to be a primary reason for revision total knee arthroplasty (TKA). In addition, altered muscle coordination patterns are commonly observed in TKA patients, which is thought to alter knee contact loads. A comprehensive understanding of the influence of surgical implantation and muscle recruitment strategies on joint contact mechanics is crucial to improve surgical techniques, increase implant longevity, and inform rehabilitation protocols. In this study, a detailed musculoskeletal model with a 12 degrees of freedom knee was developed to represent a TKA subject from the CAMS-Knee datasets. Using motion capture and ground reaction force data, a level walking cycle was simulated and the joint movement and loading patterns were estimated using a novel technique for concurrent optimization of muscle activations and joint kinematics. In addition, over 12'000 Monte Carlo simulations were performed to predict knee contact mechanics during walking, considering numerous combinations of implant alignment and muscle activation scenarios. Validation of our baseline simulation showed good agreement between the model kinematics and loading patterns against the in vivo data. Our analyses reveal a considerable impact of implant alignment on the joint kinematics, while variation in muscle activation strategies mainly affects knee contact loading. Moreover, our results indicate that high knee compressive forces do not necessarily originate from extreme kinematics and vice versa. This study provides an improved understanding of the complex inter-relationships between loading and movement patterns resulting from different surgical implantation and muscle coordination strategies and presents a validated framework towards population-based modelling in TKA.

Association of mechanical temporal summation of pain with muscle co-contraction during walking in people with knee osteoarthritis

BACKGROUND

People with knee osteoarthritis walk with excessive muscle co-contraction that can accelerate disease progression. Central pain sensitization is common in people with knee osteoarthritis and may be related to walking patterns. The objective of this study was to examine the relation of central pain sensitization with muscle co-contraction during walking in people with knee osteoarthritis.

METHODS

This study reports secondary analysis from baseline data of two clinical trials (n = 90 participants with knee osteoarthritis). The presence of central pain sensitization was measured by mechanical temporal summation at the patella and the wrist. Quadriceps and hamstrings activation was assessed using surface electromyography during walking at self-selected and fast paces. Muscle co-contraction indices for vastus medialis-medial hamstrings and vastus lateralis-lateral hamstrings muscle pairs were calculated during stance phases. Co-contraction outcomes were compared between people with and without mechanical temporal summation at each site, adjusting for age, sex, and body mass index.

FINDINGS

People with mechanical temporal summation at the knee had greater vastus lateralis-lateral hamstrings co-contraction while walking at a fast pace (P = 0.04). None of the other differences was statistically significant, but the overall trends and effect sizes indicated greater co-contraction in people with temporal summation at the knee irrespective of gait phase, walking speed, or muscle pairs.

INTERPRETATION

Central pain sensitization, assessed as mechanical temporal summation at the knee, is related to greater knee muscle co-contraction during fast walking in people with knee osteoarthritis. Thus, mitigating central sensitization may be an interventional target to reduce muscle co-contraction for people with knee osteoarthritis.

Lower-limb internal loading and potential consequences for fracture healing

Introduction: Mechanical loading is known to determine the course of bone fracture healing. We hypothesise that lower limb long bone loading differs with knee flexion angle during walking and frontal knee alignment, which affects fracture healing success. Materials and methods: Using our musculoskeletal in silico modelling constrained against in vivo data from patients with instrumented knee implants allowed us to assess internal loads in femur and tibia. These internal forces were associated with the clinical outcome of fracture healing in a relevant cohort of 178 extra-articular femur and tibia fractures in patients using a retrospective approach. Results: Mean peak forces differed with femoral compression (1,330-1,936 N at mid-shaft) amounting to about half of tibial compression (2,299-5,224 N). Mean peak bending moments in the frontal plane were greater in the femur (71-130 Nm) than in the tibia (from 26 to 43 Nm), each increasing proximally. Bending in the sagittal plane showed smaller mean peak bending moments in the femur (-38 to 43 Nm) reaching substantially higher values in the tibia (-63 to -175 Nm) with a peak proximally. Peak torsional moments had opposite directions for the femur (-13 to -40 Nm) versus tibia (15-48 Nm) with an increase towards the proximal end in both. Femoral fractures showed significantly lower scores in the modified Radiological Union Scale for Tibia (mRUST) at last follow-up (p < 0.001) compared to tibial fractures. Specifically, compression (r = 0.304), sagittal bending (r = 0.259), and frontal bending (r = -0.318) showed strong associations (p < 0.001) to mRUST at last follow-up. This was not the case for age, body weight, or localisation alone. Discussion: This study showed that moments in femur and tibia tend to decrease towards their distal ends. Tibial load components were influenced by knee flexion angle, especially at push-off, while static frontal alignment played a smaller role. Our results indicate that femur and tibia are loaded differently and thus require adapted fracture fixation considering load components rather than just overall load level.

Influence of femoral anteversion angle and neck-shaft angle on muscle forces and joint loading during walking

Femoral deformities, e.g. increased or decreased femoral anteversion (AVA) and neck-shaft angle (NSA), can lead to pathological gait patterns, altered joint loads, and degenerative joint diseases. The mechanism how femoral geometry influences muscle forces and joint load during walking is still not fully understood. The objective of our study was to investigate the influence of femoral AVA and NSA on muscle forces and joint loads during walking. We conducted a comprehensive musculoskeletal modelling study based on three-dimensional motion capture data of a healthy person with a typical gait pattern. We created 25 musculoskeletal models with a variety of NSA (93°-153°) and AVA (-12°-48°). For each model we calculated moment arms, muscle forces, muscle moments, co-contraction indices and joint loads using OpenSim. Multiple regression analyses were used to predict muscle activations, muscle moments, co-contraction indices, and joint contact forces based on the femoral geometry. We found a significant increase in co-contraction of hip and knee joint spanning muscles in models with increasing AVA and NSA, which led to a substantial increase in hip and knee joint contact forces. Decreased AVA and NSA had a minor impact on muscle and joint contact forces. Large AVA lead to increases in both knee and hip contact forces. Large NSA (153°) combined with large AVA (48°) led to increases in hip joint contact forces by five times body weight. Low NSA (108° and 93°) combined with large AVA (48°) led to two-fold increases in the second peak of the knee contact forces. Increased joint contact forces in models with increased AVA and NSA were linked to changes in hip muscle moment arms and compensatory increases in hip and knee muscle forces. Knowing the influence of femoral geometry on muscle forces and joint loads can help clinicians to improve treatment strategies in patients with femoral deformities.

Effect of carbon-fiber-reinforced polyetheretherketone on stress distribution in a redesigned tumor-type knee prosthesis: a finite element analysis

Background: Surgery for bone tumors around the knee often involves extensive resection, making the subsequent prosthetic reconstruction challenging. While carbon fiber-reinforced polyetheretherketone (CF-PEEK) has been widely used in orthopedic implants, its application in tumor-type prosthesis is limited. This study aims to evaluate the feasibility of using 30wt% and 60wt% carbon fiber-reinforced polyetheretherketone (CF30-PEEK and CF60-PEEK) as materials for a redesigned tumor-type knee prosthesis through numerical analysis. Methods: A knee joint model based on CT data was created, and the resection and prosthetic reconstruction were simulated. Three finite element models of the prostheses, representing the initial and updated designs with CoCrMo and CFR-PEEK components, were constructed. Loading conditions during standing and squatting were simulated with forces of 700 N and 2800 N, respectively. Finite element analysis was used to analyze the von Mises stress and stability of all components for each prosthesis type. Results: After improvements in both material and design, the new Type 3 prosthesis showed significantly lower overall stress with stress being evenly distributed. Compared with the initial design, the maximum von Mises stress in Type 3 was reduced by 53.9% during standing and 74.2% during squatting. In the standing position, the maximum stress in the CF30-PEEK femoral component decreased by 57.3% compared with the initial design which was composed of CoCrMo, while the stress in the CF60-PEEK cardan shaft remained consistent. In the squatting position, the maximum stress in the femoral component decreased by 81.9%, and the stress in the cardan shaft decreased by 46.5%. Conclusion: The incorporation of CF30-PEEK effectively transmits forces and reduces stress concentration on the femoral component, while CF60-PEEK in the redesigned cardan shaft significantly reduces stress while maintaining stiffness. The redesigned prosthesis effectively conducts loading force and demonstrates favorable biomechanical characteristics, indicating the promising potential of utilizing CF30-PEEK and CF60-PEEK materials for tumor-type knee prostheses. The findings of this study could provide novel insights for the design and development of tumor-type knee prostheses.

Patellar tendon elastic properties derived from in vivo loading and kinematics

Patellar complications frequently limit the success of total knee arthroplasty. In addition to the musculoskeletal forces themselves, patellar tendon elastic properties are essential for driving patellar loading. Elastic properties reported in the literature exhibit high variability and appear to differ according to the methodologies used. Specifically in total knee arthroplasty patients, only limited knowledge exists on in vivo elastic properties and their corresponding loads. For the first time, we report stiffness, Young's modulus, and forces of the patellar tendon, derived from four patients with telemetric total knee arthroplasties using a combined imaging and measurement approach. To achieve this, synchronous in vivo telemetric assessment of tibio-femoral contact forces and fluoroscopic assessment of knee kinematics, along with full body motion capture and ground reaction forces, fed musculoskeletal multi-body models to quantify patellar tendon loading and elongation. Mechanical patellar tendon properties were calculated during a squat and a sit-stand-sit activity, with resulting tendon stiffness and Young's modulus ranging from 511 to 1166 N/mm and 259 to 504 MPa, respectively. During these activities, the patellar tendon force reached peak values between 1.31 and 2.79 bodyweight, reaching levels of just ∼0.5 bodyweight below the tibio-femoral forces. The results of this study provide valuable input data for mechanical simulations of the patellar tendon and the whole resurfaced knee.

Periarticular muscle status affects in vivo tibio-femoral joint loads after total knee arthroplasty

Background: Total knee arthroplasty (TKA) is a highly effective treatment for severe knee osteoarthritis that is increasingly performed in younger, more active patients. As postoperative muscular impairments may negatively affect surgical outcomes and implant longevity, functional muscle recovery gains increasing importance in meeting future patient demands. This study aimed to assess the status of periarticular muscles in the long-term follow-up after TKA and to evaluate its impact on in vivo tibio-femoral joint loads. Methods: A case series was created, with eight patients with knee osteoarthritis. All subjects received an instrumented knee implant in unilateral TKA. Native computed tomography scans, acquired pre and postoperatively, were used to evaluate distal muscle volumes and fatty infiltration. In vivo tibio-femoral joint loads were measured telemetrically during standing, walking, stair climbing and chair rising and were correlated to muscle status. Results: Postoperatively a reduction in fatty infiltration across all periarticular muscles was pronounced. High average peak loads acted in the tibio-femoral joint ranging from 264% during stand-to-sit activities up to 341% body weight (BW) during stair descent. Fatty infiltration of the m. quadriceps femoris and hamstrings were associated with increased tibio-femoral joint contact forces during walking (r = 0.542; 0.412 and 0.766). Conclusion: The findings suggest that a fatty infiltration of periarticular muscles may lead to increased tibio-femoral joint contact forces. However, we only observed weak correlations between these parameters. Improvements in functional mobility and the restoration of a pain-free joint likely explain the observed postoperative reductions in fatty infiltration. Perioperative rehabilitation approaches targeting residual impairments in muscle quality could, contribute to reduced tibio-femoral joint loads and improved long-term outcomes of TKA. However, it has to be pointed out that the study included a small number of patients, which may limit its validity.

Passive shoulder exoskeleton support partially mitigates fatigue-induced effects in overhead work

BACKGROUND

Despite the potential of occupational passive shoulder exoskeletons (PSEs) to relieve overhead work, limited insights in overhead work precision performance impedes large-scale adoption in industry.

OBJECTIVE

To investigate the effect of PSE support on the reduction in task performance caused by physical fatigue.

METHODS

This experiment consisted of a randomized, counterbalanced cross-over design comparing Exo4Work PSE support and no support, in a physically fatigued state and a control condition. Precision performance was determined using execution speed and drilling errors. Muscle activity and shoulder joint kinematics were recorded.

RESULTS

Fatigue altered task performance, shoulder joint kinematics, muscle activity and subjective experience during overhead work. The PSE support mitigated the fatigue-induced changes in shoulder kinematics. Additionally, a part of the fatigue-induced co-activation of shoulder stabilizing muscles was avoided when working with the PSE. The PSE support also reduced the activity of the anterior and medial deltoid.

CONCLUSION

Physical fatigue provokes compensatory movements and increased co-contraction of muscles when executing overhead work. These fatigue-induced alterations are generally believed to increase the overall musculoskeletal load. The support provided by the PSE reduced muscle activity of muscles working to elevate the arm, but also partially mitigated those fatigue-induced effects.

SIGNIFICANCE

This study shows that the effect of PSE support on precision performance is limited, and suggested that, apart from the known effects of PSE support during overhead work, wearing the exoskeleton in a physically fatigued state may provide additional advantages.

Effects of Footwear on Anterior Cruciate Ligament Forces during Landing in Young Adult Females

Rates of anterior cruciate ligament (ACL) rupture in young people have increased markedly over the past two decades, with females experiencing greater growth in their risk compared to males. In this study, we determined the effects of low- and high-support athletic footwear on ACL loads during a standardized drop-land-lateral jump in 23 late-/post-pubertal females. Each participant performed the task unshod, wearing low- (Zaraca, ASICS) or high- (Kayano, ASICS) support shoes (in random order), and three-dimensional body motions, ground-reaction forces, and surface electromyograms were synchronously acquired. These data were then used in a validated computational model of ACL loading. One-dimensional statistical parametric mapping paired t-tests were used to compare ACL loads between footwear conditions during the stance phase of the task. Participants generated lower ACL forces during push-off when shod (Kayano: 624 N at 71-84% of stance; Zaraca: 616 N at 68-86% of stance) compared to barefoot (770 N and 740 N, respectively). No significant differences in ACL force were observed between the task performed wearing low- compared to high-support shoes. Compared to barefoot, both shoe types significantly lowered push-off phase peak ACL forces, potentially lowering risk of ACL injury during performance of similar tasks in sport and recreation.

Muscle activation patterns around knee following neuromuscular training in patients with knee osteoarthritis: secondary analysis of a randomized clinical trial

Objective

To compare the effects of neuromuscular training (NMT) to a quadriceps strength training (QT) program on co-contraction index (CCI) of knee muscles in patients with knee osteoarthritis (OA).

Methods

Sixty-six knee OA patients with varus malalignment were recruited from the physiotherapy outpatient department of the university. After baseline measurements, they were randomly assigned into two groups: NMT (n = 33) and QT (n = 33). Patients in NMT group received neuromuscular exercises whereas QT group received conventional strengthening exercises for a period of 12 weeks, three times per week. Electromyographic (EMG) activity of quadriceps, hamstring and gastrocnemius muscle was evaluated during treadmill walking before and after 12 weeks of intervention period and CCI of medial quadriceps-medial hamstring (med QH), lateral quadriceps-lateral hamstring (lat QH), medial quadriceps-medial gastrocnemius (med QG) and, lateral quadriceps and lateral gastrocnemius (lat QG) was calculated.

Results

There was a significantly greater reduction in CCI of med QH (p = 0.02) and lat QH (p = 0.01) in the NMT group than the QT group. Whereas both NMT and QT led to statistically similar reductions in CCI of med QG (p = 0.08) and lat QG (p = 0.66).

Conclusion

Findings of this study suggest that NMT led to a greater reduction in CCI of knee muscles than QT which indicates that enhanced sensori-motor control attained by NMT could reduce knee loading in knee OA patients with varus malalignment.

Uncertainty in Muscle–Tendon Parameters can Greatly Influence the Accuracy of Knee Contact Force Estimates of Musculoskeletal Models

Understanding the sources of error is critical before models of the musculoskeletal system can be usefully translated. Using in vivo measured tibiofemoral forces, the impact of uncertainty in muscle–tendon parameters on the accuracy of knee contact force estimates of a generic musculoskeletal model was investigated following a probabilistic approach. Population variability was introduced to the routine musculoskeletal modeling framework by perturbing input parameters of the lower limb muscles around their baseline values. Using ground reaction force and skin marker trajectory data collected from six subjects performing body-weight squat, the knee contact force was calculated for the perturbed models. The combined impact of input uncertainties resulted in a considerable variation in the knee contact force estimates (up to 2.1 BW change in the predicted force), especially at larger knee flexion angles, hence explaining up to 70% of the simulation error. Although individual muscle groups exhibited different contributions to the overall error, variation in the maximum isometric force and pathway of the muscles showed the highest impacts on the model outcomes. Importantly, this study highlights parameters that should be personalized in order to achieve the best possible predictions when using generic musculoskeletal models for activities involving deep knee flexion.

Association between hamstring coactivation during isokinetic quadriceps strength testing and knee cartilage worsening over 24 months

OBJECTIVE

This study aimed to determine longitudinal associations, including sex-specific differences, between greater knee flexor antagonist coactivation and worsening cartilage morphology in knees with or at risk for osteoarthritis (OA).

DESIGN

Baseline measurements were collected at the 60-month visit of a longitudinal osteoarthritis study following community-dwelling participants (MOST). Knee flexor and extensor muscle activity were measured with surface electromyography during a maximal isokinetic knee extension task. MRI analyzed knee cartilage morphology at baseline and 24-month follow-up. Multivariable adjusted logistic regression models were used to assess associations between coactivation level and cartilage morphology worsening.

RESULTS

Analysis of 373 women (mean ± SD age 67.4 ± 7.3 years and BMI 29.7 ± 5.0 kg/m2) and 240 men (66.5 ± 7.8 years and 29.9 ± 4.5 kg/m2) revealed that women had greater medial (P < 0.001), lateral (P < 0.001), and combined (P < 0.001) hamstring coactivation than men. In both sexes, combined hamstring coactivation was associated with patellofemoral cartilage morphology worsening [1.23 (1.02, 1.49)] and to a less significant degree with whole knee cartilage morphology worsening [1.21 (0.98, 1.49)]. In men, greater combined hamstring coactivation was associated with increased risk for whole knee [1.59 (1.06, 2.39)] and patellofemoral [1.38 (1.01, 1.88)] cartilage morphology worsening and point estimates suggested association between medial hamstring coactivation and medial tibiofemoral cartilage morphology worsening. No significant associations were detected between greater hamstring coactivation and cartilage morphology worsening in women.

CONCLUSIONS

These findings suggest a longitudinal relationship between antagonist hamstring coactivation during isokinetic knee extensor testing and worsening of cartilage morphology over 24 months in men with or at risk for knee OA.

Are there functional biomechanical differences in robotic arm-assisted bi-unicompartmental knee arthroplasty compared with conventional total knee arthroplasty? A prospective, randomized controlled trial

AIMS

The aim of this study was to compare any differences in the primary outcome (biphasic flexion knee moment during gait) of robotic arm-assisted bi-unicompartmental knee arthroplasty (bi-UKA) with conventional mechanically aligned total knee arthroplasty (TKA) at one year post-surgery.

METHODS

A total of 76 patients (34 bi-UKA and 42 TKA patients) were analyzed in a prospective, single-centre, randomized controlled trial. Flat ground shod gait analysis was performed preoperatively and one year postoperatively. Knee flexion moment was calculated from motion capture markers and force plates. The same setup determined proprioception outcomes during a joint position sense test and one-leg standing. Surgery allocation, surgeon, and secondary outcomes were analyzed for prediction of the primary outcome from a binary regression model.

RESULTS

Both interventions were shown to be effective treatment options, with no significant differences shown between interventions for the primary outcome of this study (18/35 (51.4%) biphasic TKA patients vs 20/31 (64.5%) biphasic bi-UKA patients; p = 0.558). All outcomes were compared to an age-matched, healthy cohort that outperformed both groups, indicating residual deficits exists following surgery. Logistic regression analysis of primary outcome with secondary outcomes indicated that the most significant predictor of postoperative biphasic knee moments was preoperative knee moment profile and trochlear degradation (Outerbridge) (R² = 0.381; p = 0.002, p = 0.046). A separate regression of alignment against primary outcome indicated significant bi-UKA femoral and tibial axial alignment (R² = 0.352; p = 0.029), and TKA femoral sagittal alignment (R² = 0.252; p = 0.016). The bi-UKA group showed a significant increased ability in the proprioceptive joint position test, but no difference was found in more dynamic testing of proprioception.

CONCLUSION

Robotic arm-assisted bi-UKA demonstrated equivalence to TKA in achieving a biphasic gait pattern after surgery for osteoarthritis of the knee. Both treatments are successful at improving gait, but both leave the patients with a functional limitation that is not present in healthy age-matched controls. Cite this article: Bone Joint J 2022;103-B(4):433-443.

An Efficient One-Step Moment Balancing Algorithm for Computing Medial and Lateral Knee Compartment Contact Forces

The knee adduction moment is associated with the progression of knee osteoarthritis (OA). The adduction moment reflects the net effect of muscles, passive tissues and bone-on-bone contact forces. Medial compartment OA is more common than lateral and therefore our ability to correctly partition bone-on-bones forces across the medial and lateral compartments is key to understanding mechanical factors associated with the onset and progression of knee OA. In this technical brief we present an efficient one-step moment balancing algorithm linking the sagittal and frontal planes in the determination of musculotendon forces. Novel to the one-step approach is the introduction of a penalty function limiting total compressive force from acting in the lateral compartment when the internal moment is net abduction (i.e., external knee adduction). Medial and lateral knee contact forces were computed using the one-step moment balancing algorithm for 10 subjects walking at a self-selected pace and compared to values determined using a well-established two-step frontal moment balancing approach. Overall, average peak differences in magnitude and timing were small and the ensemble-averaged contact force profiles were similar between methods. The only statistical difference was slightly larger (0.2 BWs) peak medial contact force for the one-step method during the first half of stance, however these differences are small relative to peak values and would not likely alter interpretation of the data. The 1-step moment balancing method is a more efficient methodology for computing medial and lateral knee contact forces that can be used in place of two-step frontal plane moment balancing.

Patellar Tendon Force Differs Depending on Jump-Landing Tasks and Estimation Methods

Patellar tendinopathy is a chronic overuse injury of the patellar tendon which is prevalent in jump-landing activities. Sports activities can require jumping not only with a vertical component but also in a forward direction. It is yet unknown how jumping in the forward direction may affect patellar tendon forces. The main purpose of this study was to compare PTF between landings preceded by a vertical jump and a forward jump in volleyball players. The second purpose was to compare two different estimation methods of the patellar tendon force. Fifteen male volleyball players performed vertical and forward jump-landing tasks at a controlled jump height, while kinetics and kinematics were recorded. Patellar tendon forces were calculated through two estimation methods based on inverse dynamic and static optimization procedures, using a musculoskeletal model. Results showed that forward jump-landing generated higher patellar tendon forces compared to vertical jump-landing for both estimation methods. Surprisingly, although the static optimization method considered muscle co-contraction, the inverse kinematic method provided statistically significant higher patellar tendon force values. These findings highlight that limiting the forward velocity component of the aerial phase appears to reduce the load on the patellar tendon during landing and may help to prevent patellar tendinopathy.

Optimization Reduces Knee-Joint Forces During Walking and Squatting: Validating the Inverse Dynamics Approach for Full Body Movements on Instrumented Knee Prostheses

Because of the redundancy of our motor system, movements can be performed in many ways. While multiple motor control strategies can all lead to the desired behavior, they result in different joint and muscle forces. This creates opportunities to explore this redundancy, for example, for pain avoidance or reducing the risk of further injury. To assess the effect of different motor control optimization strategies, a direct measurement of muscle and joint forces is desirable, but problematic for medical and ethical reasons. Computational modeling might provide a solution by calculating approximations of these forces. In this study, we used a full-body computational musculoskeletal model to (a) predict forces measured in knee prostheses during walking and squatting and (b) study the effect of different motor control strategies (i.e., minimizing joint force vs. muscle activation) on the joint load and prediction error. We found that musculoskeletal models can accurately predict knee joint forces with a root mean squared error of <0.5 body weight (BW) in the superior direction and about 0.1 BW in the medial and anterior directions. Generally, minimization of joint forces produced the best predictions. Furthermore, minimizing muscle activation resulted in maximum knee forces of about 4 BW for walking and 2.5 BW for squatting. Minimizing joint forces resulted in maximum knee forces of 2.25 BW and 2.12 BW, that is, a reduction of 44% and 15%, respectively. Thus, changing the muscular coordination strategy can strongly affect knee joint forces. Patients with a knee prosthesis may adapt their neuromuscular activation to reduce joint forces during locomotion.

A Review of the Relationships Between Knee Pain and Movement Neuromechanics

CONTEXT

Knee injury and disease are common, debilitating, and expensive. Pain is a chief symptom of knee injury and disease and likely contributes to arthrogenic muscle inhibition. Joint pain alters isolated motor function, muscular strength, and movement biomechanics. Because knee pain influences biomechanics, it likely also influences long-term knee joint health.

OBJECTIVE

The purpose of this article is 2-fold: (1) review effects of knee pain on lower-extremity muscular activation and corresponding biomechanics and (2) consider potential implications of neuromechanical alterations associated with knee pain for long-term knee joint health. Experimental knee pain is emphasized because it has been used to mimic clinical knee pain and clarify independent effects of knee pain. Three common sources of clinical knee pain are also discussed: patellofemoral pain, anterior cruciate ligament injury and reconstruction, and knee osteoarthritis.

DATA SOURCES

The PubMed, Web of Science, and SPORTDiscus databases were searched for articles relating to the purpose of this article.

CONCLUSION

Researchers have consistently reported that knee pain alters neuromuscular activation, often in the form of inhibition that likely occurs via voluntary and involuntary neural pathways. The effects of knee pain on quadriceps activation have been studied extensively. Knee pain decreases voluntary and involuntary quadriceps activation and strength and alters the biomechanics of various movement tasks. If allowed to persist, these neuromechanical alterations might change the response of articular cartilage to joint loads during movement and detrimentally affect long-term knee joint health. Physical rehabilitation professionals should consider neuromechanical effects of knee pain when treating knee injury and disease. Resolution of joint pain can likely help to restore normal movement neuromechanics and potentially improve long-term knee joint health and should be a top priority.

Dynamic Knee Joint Line Orientation Is Not Predictive of Tibio-Femoral Load Distribution During Walking

Some approaches in total knee arthroplasty aim for an oblique joint line to achieve an even medio-lateral load distribution across the condyles during the stance phase of gait. While there is much focus on the angulation of the joint line in static frontal radiographs, precise knowledge of the associated dynamic joint line orientation and the internal joint loading is limited. The aim of this study was to analyze how static alignment in frontal radiographs relates to dynamic alignment and load distribution, based on direct measurements of the internal joint loading and kinematics. A unique and novel combination of telemetrically measured in vivo knee joint loading and simultaneous internal joint kinematics derived from mobile fluoroscopy ("CAMS-Knee dataset") was employed to access the dynamic alignment and internal joint loading in 6 TKA patients during level walking. Static alignment was measured in standard frontal postoperative radiographs while external adduction moments were computed based on ground reaction forces. Both static and dynamic parameters were analyzed to identify correlations using linear and non-linear regression. At peak loading during gait, the joint line was tilted laterally by 4°-7° compared to the static joint line in most patients. This dynamic joint line tilt did not show a strong correlation with the medial force (R 2: 0.17) or with the mediolateral force distribution (pseudo R 2: 0.19). However, the external adduction moment showed a strong correlation with the medial force (R 2: 0.85) and with the mediolateral force distribution (pseudo R 2: 0.78). Alignment measured in static radiographs has only limited predictive power for dynamic kinematics and loading, and even the dynamic orientation of the joint line is not an important factor for the medio-lateral knee load distribution. Preventive and rehabilitative measures should focus on the external knee adduction moment based on the vertical and horizontal components of the ground reaction forces.

Effects of Pubertal Maturation on ACL Forces During a Landing Task in Females

BACKGROUND

Rates of anterior cruciate ligament (ACL) rupture in young people have increased by >70% over the past two decades. Adolescent and young adult females are at higher risk of ACL injury as compared with their prepubertal counterparts.

PURPOSE

To determine ACL loading during a standardized drop-land-lateral jump in females at different stages of pubertal maturation.

STUDY DESIGN

Controlled laboratory study.

METHODS

On the basis of the Tanner classification system, 19 pre-, 19 early-/mid-, and 24 late-/postpubertal females performed a standardized drop-land-lateral jump while 3-dimensional body motion, ground-reaction forces, and surface electromyography data were acquired. These data were used to model external biomechanics, lower limb muscle forces, and knee contact forces, which were subsequently used in a validated computational model to estimate ACL loading. Statistical parametric mapping analysis of variance was used to compare ACL force and its causal contributors among the 3 pubertal maturation groups during stance phase of the task.

RESULTS

When compared with pre- and early-/midpubertal females, late-/postpubertal females had significantly higher ACL force with mean differences of 471 and 356 N during the first 30% and 48% to 85% of stance, and 343 and 274 N during the first 24% and 59% to 81% of stance, respectively, which overlapped peaks in ACL force. At the point of peak ACL force, contributions from sagittal and transverse plane loading mechanisms to ACL force were higher in late-/postpubertal compared with pre- and early-/midpubertal groups (medium effect sizes from 0.44 to 0.77). No differences were found between pre- and early-/midpubertal groups in ACL force or its contributors.

CONCLUSION

The highest ACL forces were observed in late-/postpubertal females, consistent with recently reported rises of ACL injury rates in females aged 15 to 19 years. It is important to quantify ACL force and its contributors during dynamic tasks to advance our understanding of the loading mechanism and thereby provide guidance to injury prevention.

CLINICAL RELEVANCE

Growth of ACL volume plateaus around 10 years of age, before pubertal maturation, meaning that a late-/postpubertal female could have an ACL of similar size to their less mature counterparts. However, late-/postpubertal females have higher body mass requiring higher muscle forces to accelerate the body during dynamic tasks, which may increase ACL loading. Thus, if greater forces develop in these females, in part because of their increased body mass, these higher forces will be applied to an ACL that is not proportionally larger. This may partially explain the higher rates of ACL injury in late-/postpubertal females.

Self-Reported Walking Difficulty Associated with Stiff-Knee Gait in Japanese Patients with Knee Osteoarthritis: A Preliminary Cross-Sectional Study

Background: Individuals with knee osteoarthritis are restricted in their daily activity because of walking difficulty. The purpose of this investigation was to examine the association between self-reported walking difficulty and knee flexion excursion during gait in Japanese patients with knee osteoarthritis. Methods: Twenty-eight patients with knee osteoarthritis participated in this study. Knee flexion excursions in loading response and swing during gait were measured through an inertial measurement unit-based motion capture system. The walking difficulty was assessed by a subitem in the Japanese Knee Osteoarthritis Measure. Pain intensity was assessed by a visual analog scale. Characteristics and gait variables were compared between groups that were determined a priori using the results of the walking difficulty assessment. The relationship between knee flexion excursion during gait and walking difficulty were analyzed using logistic regression. Results: The participants with walking difficulty had significantly small knee flexion excursion in both loading response and swing with large pain. After controlling the effect of pain, only knee flexion excursion in the swing was significantly related to the walking difficulty. Conclusions: This study suggested that the knee flexion excursion in swing during gait is helpful for understanding the walking difficulty experienced in Japanese patients with knee osteoarthritis.

Responses in knee joint muscle activation patterns to different perturbations during gait in healthy subjects

PURPOSE

To compare the responses in knee joint muscle activation patterns to different perturbations during gait in healthy subjects.

SCOPE

Nine healthy participants were subjected to perturbed walking on a split-belt treadmill. Four perturbation types were applied, each at five intensities. The activations of seven muscles surrounding the knee were measured using surface EMG. The responses in muscle activation were expressed by calculating mean, peak, co-contraction (CCI) and perturbation responses (PR) values. PR captures the responses relative to unperturbed gait. Statistical parametric mapping analysis was used to compare the muscle activation patterns between conditions.

RESULTS

Perturbations evoked only small responses in muscle activation, though higher perturbation intensities yielded a higher mean activation in five muscles, as well as higher PR. Different types of perturbation led to different responses in the rectus femoris, medial gastrocnemius and lateral gastrocnemius. The participants had lower CCI just before perturbation compared to the same phase of unperturbed gait.

CONCLUSIONS

Healthy participants respond to different perturbations during gait with small adaptations in their knee joint muscle activation patterns. This study provides insights in how the muscles are activated to stabilize the knee when challenged. Furthermore it could guide future studies in determining aberrant muscle activation in patients with knee disorders.

On the 3D Nature of the Magpie (Aves: Pica pica) Functional Hindlimb Anatomy During the Take-Off Jump

Take-off is a critical phase of flight, and many birds jump to take to the air. Although the actuation of the hindlimb in terrestrial birds is not limited to the sagittal plane, and considerable non-sagittal plane motion has been observed during take-off jumps, how the spatial arrangement of hindlimb muscles in flying birds facilitates such jumps has received little attention. This study aims to ascertain the 3D hip muscle function in the magpie (Pica pica), a bird known to jump to take-off. A musculoskeletal model of the magpie hindlimb was developed using μCT scans (isotropic resolution of 18.2 μm) to derive bone surfaces, while the 3D muscle path definition was further informed by the literature. Function was robustly characterized by determining the 3D moment-generating capacity of 14 hip muscles over the functional joint range of motion during a take-off leap considering variations across the attachment areas and uncertainty in dynamic muscle geometry. Ratios of peak flexion-extension (FE) to internal-external rotation (IER) and abduction-adduction (ABD) moment-generating capacity were indicators of muscle function. Analyses of 972 variations of the 3D muscle paths showed that 11 of 14 muscles can act as either flexor or extensor, while all 14 muscles demonstrated the capacity to act as internal or external rotators of the hip with the mean ratios of peak FE to IER and ABD moment-generating capacity were 0.89 and 0.31, respectively. Moment-generating capacity in IER approaching levels in the FE moment-generating capacity determined here underline that the avian hip muscle function is not limited to the sagittal plane. Together with previous findings on the 3D nature of hindlimb kinematics, our results suggest that musculoskeletal models to develop a more detailed understanding of how birds orchestrate the use of muscles during a take-off jump cannot be restricted to the sagittal plane.

A half marathon shifts the mediolateral force distribution at the tibiofemoral joint

Runners' gait patterns vary during a half marathon and influence the knee joint mechanics. Joint contact force is a better estimate of the net joint loadings than external joint moments and closely correlates to injury risks. This study explored the changes of lower limb joint kinematics, muscle activities, and knee joint loading in runners across the running mileages of a half marathon. Fourteen runners completed a half marathon on an instrumented treadmill where motion capture was conducted every 2 km (from 2 to 20 km). A musculoskeletal model incorporating medial/lateral tibiofemoral compartments was used to process the movement data and report outcome variables at the selected distance checkpoints. Statistics showed no changes in joint angles, muscle co-contraction index, ground reaction force variables, and medial tibiofemoral contact force (p > 0.05). Knee adduction moment at 18 km was significantly lower than those at 2 km (p = 0.002, γ = 0.813) and 6 km (p = 0.001, γ = 0.663). Compared to that at 2 km, lateral tibiofemoral contact force was reduced at 18 km (p = 0.030, Hedges' g = 0.690), 16 km (p < 0.001, Hedges' g = 0.782), 14 km (p = 0.045, Hedges' g = 0.859), and 10 km (p < 0.001, Hedges' g = 0.771) respectively. Mechanical realignment of the lower limb may be the cause of the altered knee loadings and possibly led to reduced running economy in response to a prolonged run. The injury potential of the redistributed tibiofemoral forces warranted further studies.

Towards planning of osteotomy around the knee with quantitative inclusion of the adduction moment: a biomechanical approach

PURPOSE

Despite practised for decades, the planning of osteotomy around the knee, commonly using the Mikulicz-Line, is only empirically based, clinical outcome inconsistent and the target angle still controversial. A better target than the angle of frontal-plane static leg alignment might be the external frontal-plane lever arm (EFL) of the knee adduction moment. Hypothetically assessable from frontal-plane-radiograph skeleton dimensions, it might depend on the leg-alignment angle, the hip-centre-to-hip-centre distance, the femur- and tibia-length.

METHODS

The target EFL to achieve a medial compartment force ratio of 50% during level-walking was identified by relating in-vivo-measurement data of knee-internal loads from nine subjects with instrumented prostheses to the same subjects' EFLs computed from frontal-plane skeleton dimensions. Adduction moments derived from these calculated EFLs were compared to the subjects' adduction moments measured during gait analysis.

RESULTS

Highly significant relationships (0.88 ≤ R2 ≤ 0.90) were found for both the peak adduction moment measured during gait analysis and the medial compartment force ratio measured in vivo to EFL calculated from frontal-plane skeleton dimensions. Both correlations exceed the respective correlations with the leg alignment angle, EFL even predicts the adduction moment's first peak. The guideline EFL for planning osteotomy was identified to 0.349 times the epicondyle distance, hence deducing formulas for individualized target angles and Mikulicz-Line positions based on full-leg radiograph skeleton dimensions. Applied to realistic skeleton geometries, widespread results explain the inconsistency regarding correction recommendations, whereas results for average geometries exactly meet the most-consented "Fujisawa-Point".

CONCLUSION

Osteotomy outcome might be improved by planning re-alignment based on the provided formulas exploiting full-leg-radiograph skeleton dimensions.

Self-Perception of the Knee Is Associated with Joint Motion during the Loading Response in Individuals with Knee Osteoarthritis: A Pilot Cross-Sectional Study

Small knee flexion motion is a characteristic of gait in individuals with knee osteoarthritis. This study examined the relationship between knee flexion excursion in loading response and knee self-perception in individuals with knee osteoarthritis. Twenty-one individuals with knee osteoarthritis participated in this study. Knee flexion excursions in loading response while walking at a comfortable and a fast-walking speed were measured using an inertial measurement unit-based motion capture system. The degree of knee perceptual impairment was evaluated using the Fremantle Knee Awareness Questionnaire (FreKAQ). The relationships between the FreKAQ score and gait variables and knee function were evaluated by calculating the correlation coefficient. The unique contributions of knee self-perception and muscle strength to knee flexion excursion in loading response were analyzed using hierarchical linear regression. Knee self-perception was significantly correlated with pain during walking, muscle strength and knee flexion excursion at fast speed. In the fast speed condition only, impaired knee self-perception was inversely proportional to knee flexion excursion and accounted for 21.8% of the variance in knee flexion excursion. This result suggests that impaired self-perception of the knee may help to explain the decrease in the knee flexion excursion in the loading response in individuals with knee osteoarthritis.

Review of musculoskeletal modelling in a clinical setting: Current use in rehabilitation design, surgical decision making and healthcare interventions

BACKGROUND

Musculoskeletal modelling is a common means by which to non-invasively analyse movement. Such models have largely been used to observe function in both healthy and patient populations. However, utility in a clinical environment is largely unknown. The aim of this review was to explore existing uses of musculoskeletal models as a clinical intervention, or decision-making, tool.

METHODS

A literature search was performed using PubMed and Scopus to find articles published since 2010 and relating to musculoskeletal modelling and joint and muscle forces.

FINDINGS

4662 abstracts were found, of which 39 relevant articles were reviewed. Journal articles were categorised into 5 distinct groups: non-surgical treatment, orthoses assessment, surgical decision making, surgical intervention assessment and rehabilitation regime assessment. All reviewed articles were authored by collaborations between clinicians and engineers/modellers. Current uses included insight into the development of osteoarthritis, identifying candidates for hamstring lengthening surgery, and the assessment of exercise programmes to reduce joint damage.

INTERPRETATION

There is little evidence showing the use of musculoskeletal modelling as a tool for patient care, despite the ability to assess long-term joint loading and muscle overuse during functional activities, as well as clinical decision making to avoid unfavourable treatment outcomes. Continued collaboration between model developers should aim to create clinically-friendly models which can be used with minimal input and experience by healthcare professionals to determine surgical necessity and suitability for rehabilitation regimes, and in the assessment of orthotic devices.

Knee Load Distribution in Hip Osteoarthritis Patients After Total Hip Replacement

Reduced external knee adduction moments in the second half of stance after total hip replacement have been reported in hip osteoarthritis patients. This reduction is thought to shift the load from the medial to the lateral knee compartment and as such increase the risk for knee osteoarthritis. The knee adduction moment is a surrogate for the load distribution between the medial and lateral compartments of the knee and not a valid measure for the tibiofemoral contact forces which are the result of externally applied forces and muscle forces. The purpose of this study was to investigate whether the distribution of the tibiofemoral contact forces over the knee compartments in unilateral hip osteoarthritis patients 1 year after receiving a primary total hip replacement differs from healthy controls. Musculoskeletal modeling on gait was performed in OpenSim using the detailed knee model of Lerner et al. (2015) for 19 patients as well as for 15 healthy controls of similar age. Knee adduction moments were calculated by the inverse dynamics analysis, medial and lateral tibiofemoral contact forces with the joint reaction force analysis. Moments and contact forces of patients and controls were compared using Statistical Parametric Mapping two-sample t-tests. Knee adduction moments and medial tibiofemoral contact forces of both the ipsi- and contralateral leg were not significantly different compared to healthy controls. The contralateral leg showed 14% higher medial tibiofemoral contact forces compared to the ipsilateral (operated) leg during the second half of stance. During the first half of stance, the lateral tibiofemoral contact force of the contralateral leg was 39% lower and the ratio 32% lower compared to healthy controls. In contrast, during the second half of stance the forces were significantly higher (39 and 26%, respectively) compared to healthy controls. The higher ratio indicates a changed distribution whereas the increased lateral tibiofemoral contact forces indicate a higher lateral knee joint loading in the contralateral leg in OA patients after total hip replacement (THR). Musculoskeletal modeling using a detailed knee model can be useful to detect differences in the load distribution between the medial and lateral knee compartment which cannot be verified with the knee adduction moment.

Osteoarthritis year in review 2019: mechanics

Mechanics play a critical - but not sole - role in the pathogenesis of osteoarthritis, and recent research has highlighted how mechanical constructs are relevant at the cellular, joint, and whole-body level related to osteoarthritis outcomes. This review examined papers from April 2018 to April 2019 that reported on the role of mechanics in osteoarthritis etiology, with a particular emphasis on studies that focused on the interaction between movement and tissue biomechanics with other clinical outcomes relevant to the pathophysiology of osteoarthritis. Studies were grouped by themes that were particularly prevalent from the past year. Results of the search highlighted the large exposure of knee-related research relative to other body areas, as well as studies utilizing laboratory-based motion capture technology. New research from this past year highlighted the important role that rate of exerted loads and rate of muscle force development - rather than simply force capacity (strength) - have in OA etiology and treatment. Further, the role of muscle activation patterns in functional and structural aspects of joint health has received much interest, though findings remain equivocal. Finally, new research has identified potential mechanical outcome measures that may be related to osteoarthritis disease progression. Future research should continue to combine knowledge of mechanics with other relevant research techniques, and to identify mechanical markers of joint health and structural and functional disease progression that are needed to best inform disease prevention, monitoring, and treatment.

Changes in Muscle Activity Patterns and Joint Kinematics During Gait in Hemophilic Arthropathy

Hemophilic arthropathy is the result of repetitive intra-articular bleeding and synovial inflammation. In people with hemophilic arthropathy (PWHA), very little is known about the neural control of individual muscles during movement. The aim of the present study was to assess if the neural control of individual muscles and coordination between antagonistic muscle pairs and joint kinematics during gait are affected in PWHA. Thirteen control subjects (CG) walked overground at their preferred and slow velocity (1 m/s), and 14 PWHA walked overground at the preferred velocity (1 m/s). Joint kinematics and temporal gait parameters were assessed using four inertial sensors. Surface electromyography (EMG) was collected from gluteus maximus (GMAX), gluteus medius (GMED), vastus medialis (VM), vastus lateralis (VL), rectus femoris (RF), medial gastrocnemius (MG), lateral gastrocnemius (LG), soleus (SOL), tibialis anterior (TA), semitendinosus (ST), and biceps femoris (BF). Waveforms were compared using the time-series analysis through statistical parametric mapping. In PWHA compared to CG, EMG amplitude during the stance phase was higher for LG (for both velocities of the CG), BF (slow velocity only), and ST (preferred velocity only) (p < 0.05). Co-contraction during the stance phase was higher for MG-TA, LG-TA, VL-BF, VM-ST, LG-VL, and MG-VM (both velocities) (p < 0.05). MG and LG were excited earlier (preferred velocity only) (p < 0.05). A later offset during the stance phase was found for VL, BF, and ST (both velocities), and BF and GMAX (preferred velocity only) (p < 0.05). In addition, the range of motion in knee and ankle joints was lower in PWHA (both velocities) and hip joint (preferred velocity only) (p < 0.05). In conclusion, the neural control of individual muscles and coordination between antagonistic muscles during gait in PWHA differs substantially from control subjects.

The Capacity of Generic Musculoskeletal Simulations to Predict Knee Joint Loading Using the CAMS-Knee Datasets

Musculoskeletal models enable non-invasive estimation of knee contact forces (KCFs) during functional movements. However, the redundant nature of the musculoskeletal system and uncertainty in model parameters necessitates that model predictions are critically evaluated. This study compared KCF and muscle activation patterns predicted using a scaled generic model and OpenSim static optimization tool against in vivo measurements from six patients in the CAMS-knee datasets during level walking and squatting. Generally, the total KCFs were under-predicted (RMS: 47.55%BW, R²: 0.92) throughout the gait cycle, but substiantially over-predicted (RMS: 105.7%BW, R²: 0.81) during squatting. To understand the underlying etiology of the errors, muscle activations were compared to electromyography (EMG) signals, and showed good agreement during level walking. For squatting, however, the muscle activations showed large descrepancies especially for the biceps femoris long head. Errors in the predicted KCF and muscle activation patterns were greatest during deep squat. Hence suggesting that the errors mainly originate from muscle represented at the hip and an associated muscle co-contraction at the knee. Furthermore, there were substaintial differences in the ranking of subjects and activities based on peak KCFs in the simulations versus measurements. Thus, future simulation study designs must account for subject-specific uncertainties in musculoskeletal predictions.