Rational design of Raman-labeled nanoparticles for a dual-modality, light scattering immunoassay on a polystyrene substrate

Application of SERS-based nanobiosensors to metabolite biomarkers of CKD

A clinical diagnosis of chronic kidney disease (CKD) is commonly achieved by estimating the serum levels of urea and creatinine (CR). Given the limitations of the conventional diagnostic assays, it is imperative to seek alternative, economical strategies for the detection of CKD-specific biomarkers with high specificity and selectivity. In this respect, surface-enhanced Raman spectroscopy (SERS) can be regarded as an ideal choice. SERS signals can be greatly amplified by noble metal nanoparticles (e.g., gold nanoparticles (GNPs)) of numerous sizes, shapes, and configurations to help achieve ultra-sensitive single molecule-level detection at 10^-15 M (up to 10 orders of magnitude more sensitive than fluorescence-based detection). The irregular geometry of GNPs with spike-like tips, dimers, and aggregates with small nanogaps (i.e., due to plasmon coupling such as Raman hot spots) play a pivotal role in enhancing the specificity and sensitivity of SERS. This review critically outlines the performance of SERS-based biosensors in the ultrasensitive detection of CKD biomarkers in various body fluids in terms of basic quality assurance parameters (e.g., limit of detection, figure of merit, enhancement factor, and stability of the biosensor). Moreover, the challenges and perspectives are described with respect to the expansion of such sensing techniques in practical clinical settings.

Exploring Sensitive Label-Free Multiplex Analysis with Raman-Coded Microbeads and SERS-Coded Reporters

Suspension microsphere immunoassays are rapidly gaining attention in multiplex bioassays. Accurate detection of multiple analytes from a single measurement is critical in modern bioanalysis, which always requires complex encoding systems. In this study, a novel bioassay with Raman-coded antibody supports (polymer microbeads with different Raman signatures) and surface-enhanced Raman scattering (SERS)-coded nanotags (organic thiols on a gold nanoparticle surface with different SERS signatures) was developed as a model fluorescent, label-free, bead-based multiplex immunoassay system. The developed homogeneous immunoassays included two surface-functionalized monodisperse Raman-coded microbeads of polystyrene and poly(4-tert-butylstyrene) as the immune solid supports, and two epitope modified nanotags (self-assembled 4-mercaptobenzoic acid or 3-mercaptopropionic acid on gold nanoparticles) as the SERS-coded reporters. Such multiplex Raman/SERS-based microsphere immunoassays could selectively identify specific paratope–epitope interactions from one mixture sample solution under a single laser illumination, and thus hold great promise in future suspension multiplex analysis for diverse biomedical applications.

Lateral Flow Immunoassay of SARS-CoV-2 Antigen with SERS-Based Registration: Development and Comparison with Traditional Immunoassays

The current COVID-19 pandemic has increased the demand for pathogen detection methods that combine low detection limits with rapid results. Despite the significant progress in methods and devices for nucleic acid amplification, immunochemical methods are still preferred for mass testing without specialized laboratories and highly qualified personnel. The most widely used immunoassays are microplate enzyme-linked immunosorbent assay (ELISA) with photometric detection and lateral flow immunoassay (LFIA) with visual results assessment. However, the disadvantage of ELISA is its considerable duration, and that of LFIA is its low sensitivity. In this study, the modified LFIA of a specific antigen of the causative agent of COVID-19, spike receptor-binding domain, was developed and characterized. This modified LFIA includes the use of gold nanoparticles with immobilized antibodies and 4-mercaptobenzoic acid as surface-enhanced Raman scattering (SERS) nanotag and registration of the nanotag binding by SERS spectrometry. To enhance the sensitivity of LFIA-SERS analysis, we determined the optimal compositions of SERS nanotags and membranes used in LFIA. For benchmark comparison, ELISA and conventional colorimetric LFIA were used with the same immune reagents. The proposed method combines a low detection limit of 0.1 ng/mL (at 0.4 ng/mL for ELISA and 1 ng/mL for qualitative LFIA) with a short assay time equal to 20 min (at 3.5 h for ELISA and 15 min for LFIA). The results obtained demonstrate the promise of using the SERS effects in membrane immuno-analytical systems.

Feasibility of Voltage-Applied SERS Measurement of Bile Juice as an Effective Analytical Scheme to Enhance Discrimination between Gall Bladder (GB) Polyp and GB Cancer

A unique surface-enhanced Raman scattering (SERS) measurement scheme to discriminate gall bladder (GB) polyp and GB cancer by analysis of bile juice is proposed. Along with the high sensitivity of SERS, external voltage application during SERS measurement was incorporated to improve sample discriminability. For this purpose, Au nanodendrites were constructed on a screen-printed electrode (referred to as AuND@SPE), and Raman spectra of extracted aqueous phases from raw bile juice samples were acquired using the AuND@SPE at voltages from -300 to 300 mV. The sample spectra resembled that of bilirubin, possessing an open chain tetrapyrrole, showing that bilirubin derivatives in bile juice were mainly responsible for the observed peaks. Discrimination of GB polyp and GB cancer using just the normal SERS spectra was not achieved but became apparent when the spectra were acquired at a voltage of -100 mV. When voltage-applied SERS spectra of bilirubin and urobilinogen (one of bilirubin's derivatives) were examined, a sudden intensity elevation occurring at -100 mV was observed for urobilinogen but not bilirubin. Based on examination of corresponding cyclic voltammograms, the potential-driven strong adsorption of urobilinogen (no faradaic charge transfer) on AuND occurring at -100 mV induced a substantial increase in SERS intensity. It was presumed that the content of urobilinogen in the bile juice of a GB cancer patient would be higher than that of a GB polyp patient, and the contained urobilinogen was sensitively highlighted by applying -100 mV during SERS measurement, allowing clear discrimination of GB cancer against GB polyp.

Common Aspects Influencing the Translocation of SERS to Biomedicine

This review overviews the impact in biomedicine of surface enhanced. Raman scattering motivated by the great potential we believe this technique has. We present the advantages and limitations of this technique relevant to bioanalysis in vitro and in vivo and how this technique goes beyond the state of the art of traditional analytical, labelling and healthcare diagnostic technologies.

Alternative cDEP Design to Facilitate Cell Isolation for Identification by Raman Spectroscopy

Dielectrophoresis (DEP) uses non-uniform electric fields to cause motion in particles due to the particles’ intrinsic properties. As such, DEP is a well-suited label-free means for cell sorting. Of the various methods of implementing DEP, contactless dielectrophoresis (cDEP) is advantageous as it avoids common problems associated with DEP, such as electrode fouling and electrolysis. Unfortunately, cDEP devices can be difficult to fabricate, replicate, and reuse. In addition, the operating parameters are limited by the dielectric breakdown of polydimethylsiloxane (PDMS). This study presents an alternative way to fabricate a cDEP device allowing for higher operating voltages, improved replication, and the opportunity for analysis using Raman spectroscopy. In this device, channels were formed in fused silica rather than PDMS. The device successfully trapped 3.3 μm polystyrene spheres for analysis by Raman spectroscopy. The successful implementation indicates the potential to use cDEP to isolate and identify biological samples on a single device.

Effects of Coalescence on Shear-Induced Gelation of Colloids

Shearing lyophobic colloidal suspensions can lead to aggregation, followed by gelation, if the formed clusters grow to sizes large enough to percolate. If the temperature is set over the glass transition temperature of the suspended material, the particles embedded in the same aggregate start to coalesce with one another. Coalescence occurs to the finite viscosity of the particles' material, which leads to material diffusion from particle to particle. The driving force of this process is the reduction of the particle-dispersant interface and, as a consequence, the decrease the center-to-center separation of the particles. This leads to decreased cluster size, and hence a delayed gelation. Simultaneously, coalescence reinforces the particle-particle bonds formed upon aggregation, leading to clusters that are able to resist higher hydrodynamic forces before breaking up, hence leading to faster gelation. These two competing effects, combined with the natural complexity of colloidal aggregation makes it rather difficult to understand and predict which trend becomes dominant. In the present work, the shear-induced gelation of model polymeric colloidal systems with different glass transition temperatures has been studied. Starting with their interaction potential we investigate the impact of temperature on the gel time in concentrated suspensions (φ = 5%) under steady shear, followed by the effect of temperature on the stress-resistance of fully destabilized clusters under agitation. The results of the present work allow for a systematic view and deepened understanding of the factors governing shear-induced gelation in the presence of coalescence.

Raman tags: Novel optical probes for intracellular sensing and imaging

Optical labels are needed for probing specific target molecules in complex biological systems. As a newly emerging category of tags for molecular imaging in live cells, the Raman label attracts much attention because of the rich information obtained from targeted and untargeted molecules by detecting molecular vibrations. Here, we list three types of Raman probes based on different mechanisms: Surface Enhanced Raman Scattering (SERS) probes, bioorthogonal Raman probes, and Resonance Raman (RR) probes. We review how these Raman probes work for detecting and imaging proteins, nucleic acids, lipids, and other biomolecules in vitro, within cells, or in vivo. We also summarize recent noteworthy studies, expound on the construction of every type of Raman probe and operating principle, sum up in tables typically targeting molecules for specific binding, and provide merits, drawbacks, and future prospects for the three Raman probes.

Fabricating a UV-Vis and Raman Spectroscopy Immunoassay Platform

Immunoassays are used to detect proteins based on the presence of associated antibodies. Because of their extensive use in research and clinical settings, a large infrastructure of immunoassay instruments and materials can be found. For example, 96- and 384-well polystyrene plates are available commercially and have a standard design to accommodate ultraviolet-visible (UV-Vis) spectroscopy machines from various manufacturers. In addition, a wide variety of immunoglobulins, detection tags, and blocking agents for customized immunoassay designs such as enzyme-linked immunosorbent assays (ELISA) are available. Despite the existing infrastructure, standard ELISA kits do not meet all research needs, requiring individualized immunoassay development, which can be expensive and time-consuming. For example, ELISA kits have low multiplexing (detection of more than one analyte at a time) capabilities as they usually depend on fluorescence or colorimetric methods for detection. Colorimetric and fluorescent-based analyses have limited multiplexing capabilities due to broad spectral peaks. In contrast, Raman spectroscopy-based methods have a much greater capability for multiplexing due to narrow emission peaks. Another advantage of Raman spectroscopy is that Raman reporters experience significantly less photobleaching than fluorescent tags¹. Despite the advantages that Raman reporters have over fluorescent and colorimetric tags, protocols to fabricate Raman-based immunoassays are limited. The purpose of this paper is to provide a protocol to prepare functionalized probes to use in conjunction with polystyrene plates for direct detection of analytes by UV-Vis analysis and Raman spectroscopy. This protocol will allow researchers to take a do-it-yourself approach for future multi-analyte detection while capitalizing on pre-established infrastructure.