Carboxymethyl cellulase production optimization from newly isolated thermophilic Bacillus subtilis K-18 for saccharification using response surface methodology

Investigation and characterization of changes in potato peels by thermochemical acidic pre-treatment for extraction of various compounds

Potato peel waste (PPW) is an underutilized substrate which is produced in huge amounts by food processing industries. Using PPW a feedstock for production of useful compounds can overcome the problem of waste management as well as cost-effective. In present study, potential of PPW was investigated using chemical and thermochemical treatment processes. Three independent variables i.e., PPW concentration, dilute sulphuric acid concentration and liberation time were selected to optimize the production of fermentable sugars (TS and RS) and phenolic compounds (TP). These three process variables were selected in the range of 5-15 g w/v substrate, 0.8-1.2 v/v acid conc. and 4-6 h. Whole treatment process was optimized by using box-behnken design (BBD) of response surface methodology (RSM). Highest yield of total and reducing sugars and total phenolic compounds obtained after chemical treatment was 188.00, 144.42 and 43.68 mg/gds, respectively. The maximum yield of fermentable sugars attained by acid plus steam treatment were 720.00 and 660.62 mg/gds of TS and RS, respectively w.r.t 5% substrate conc. in 0.8% acid with residence time of 6 h. Results recorded that acid assisted autoclaved treatment could be an effective process for PPW deconstruction. Characterization of substrate before and after treatment was checked by SEM and FTIR. Spectras and micrographs confirmed the topographical variations in treated substrate. The present study was aimed to utilize biowaste and to determine cost-effective conditions for degradation of PWW into value added compounds.

Amylase and Cellulase Production from Newly Isolated Bacillus subtilis Using Acid Treated Potato Peel Waste

Species belonging to the genus Bacillus produce many advantageous extracellular enzymes that have tremendous applications on a commercial scale for the textile, detergent, feed, food, and beverage industries. This study aimed to isolate potent thermo-tolerant amylolytic and cellulolytic bacterium from the local environment. Using the Box-Behnken design of response surface methodology, we further optimized the amylase and cellulase activity. The isolate was identified by 16S rRNA gene sequencing as Bacillus subtilis QY4. This study utilized potato peel waste (PPW) as the biomaterial, which is excessively being dumped in an open environment. Nutritional status of the dried PPW was determined by proximate analysis. All experimental runs were carried out in 250 mL Erlenmeyer flasks containing acid treated PPW as a substrate by the thermos-tolerant Bacillus subtilis QY4 incubated at 37 °C for 72 h of submerged fermentation. Results revealed that the dilute H2SO4 assisted autoclaved treatment favored more amylase production (0.601 IU/mL/min) compared to the acid treatment whereas high cellulase production (1.269 IU/mL/min) was observed in the dilute acid treatment and was found to be very effective compared to the acid assisted autoclaved treatment. The p-value, F-value, and coefficient of determination proved the significance of the model. These results suggest that PPW could be sustainably used to produce enzymes, which offer tremendous applications in various industrial arrays, particularly in biofuel production.

Statistical optimization of cellulase production from Bacillus sp. YE16 isolated from yak dung of the Sikkim Himalayas for its application in bioethanol production using pretreated sugarcane bagasse

Cellulolytic bacteria were isolated from yak dung samples collected from different habitats of Sikkim, India. Isolate YE16 from the Yumthang Valley sample showed highest enzyme activity of 7.68 U/mL and was identified as Bacillus sp., which has a sequence similarity of 96.15% with B. velezensis. One factor at a time (OFAT) analysis revealed that an acidic pH of 5 with 37 °C temperature was optimum for maximum enzyme production after 36 hrs of incubation (13.88 U/mL), which was further increased after statistical optimization (34.70 U/mL). Media optimization based on response surface methodology predicted that Carboxymethyl cellulose (CMC) and MgSO4 at concentrations of 30 g/L and 0.525 g/L, respectively, at pH 5.5 to show CMCase activity of 30.612 U/mL, which was consistent with the observed value of 30.25 U/mL and confirmed the model. The crude enzyme also efficiently hydrolyzed alkaline pretreated sugarcane bagasse, releasing 7.09 g/L of glucose equivalent with an ethanol production of 3.05 g.

Enhancement effect of AgO nanoparticles on fermentative cellulase activity from thermophilic Bacillus subtilis Ag-PQ

BACKGROUND

Cellulase is an important bioprocessing enzyme used in various industries. This study was conducted with the aim of improving the biodegradation activity of cellulase obtained from the Bacillus subtilis AG-PQ strain. For this purpose, AgO and FeO NPs were fabricated using AgNO3 and FeSO4·7H2O salt respectively through a hydro-thermal method based on five major steps; selection of research-grade materials, optimization of temperature, pH, centrifuge, sample washed with distilled water, dry completely in the oven at the optimized temperature and finally ground for characterization. The synthesized NPs were characterized by scanning electron microscope (SEM), energy dispersive X-ray (EDX), and X-ray diffraction (XRD) to confirm the morphology, elemental composition, and structure of the sample respectively. The diameter of the NPs was recorded through SEM which lay in the range of 70-95 nm.

RESULTS

Cultural parameters were optimized to achieve better cellulase production, where incubation time of 56 h, inoculum size of 5%, 1% coconut cake, 0.43% ammonium nitrate, pH 8, and 37 °C temperature were found optimal. The enhancing effect of AgO NPs was observed on cellulase activity (57.804 U/ml/min) at 50 ppm concentration while FeO NPs exhibited an inhibitory effect on cellulase activity at all concentrations. Molecular docking analysis was also performed to understand the underlying mechanism of improved enzymatic activity by nanocatalysts.

CONCLUSION

This study authenticates AgO NPs as better nanocatalysts for improved thermostable cellulase biodegradation activity with the extraordinary capability to be potentially utilized in bioethanol production.

Bioindustrial applications of thermostable Endoglucanase purified from Trichoderma viride towards the conversion of agrowastes to value-added products

Importance of biocatalytic reactions and biotransformations mediated by fungal enzymes has increased tremendously in various industries. Endoglucanase obtained from Trichoderma viride has been utilized for bioconversion of agrowastes; wheat straw (WS) and corn stover (CS) as biomass into citric acid and single cell protein (SCP) as value-added products. The enzyme was purified to apparent homogeneity with Mr:44.67 kDa; purification-fold, yield, specific activity to be 19.5-, 29.2%, and 150.4 Units.mg-1, respectively, with thermostability up to 70 °C. The enzyme showed a novel N-terminal peptide and its computational analysis revealed a conserved 'SG' amino acid sequence alike microbial cellulases. The experimental results have shown the potential of endoglucanase for the conversion of agrowastes; wheat straw (WS) and corn stover (CS) into citric acid, maximum yield (KgM-3) found in submerged (WS:50;CS:45) fermentation process. Single-cell protein (SCP) production in WS (68 KgM-3) hydrolysate was superior to both CS hydrolysate (60 KgM-3) and YEPD (standard medium) (58 KgM-3).

Optimization of Alkali Treatment for Production of Fermentable Sugars and Phenolic Compounds from Potato Peel Waste Using Topographical Characterization and FTIR Spectroscopy

Potato peel waste (PPW) was utilized as a bio-template for the production of valuable compounds such as reducing sugars (RS), total sugar (TS) and total phenolic compounds (TPC). Two methods of alkali treatments, i.e., chemical (NaOH) and thermochemical (NaOH assisted with autoclaving) processes, were employed for the deconstruction of PPW. Response surface methodology (RSM) was used to study the effects of alkali concentration (0.6-1.0 w/v), substrate concentration (5-15 g) and time (4-8 h) on the extraction of RS, TS and TP from PPW. The application of alkali plus steam treatment in Box-Behnken design (BBD) with three levels yielded the optimum releases of RS, TS and TP as 7.163, 28.971 and 4.064 mg/mL, respectively, corresponding to 10% substrate loading, in 0.6% NaOH for 8 h. However, the alkali treatment reported optimum extractions of RS, TS and TP as 4.061, 17.432 and 2.993 mg/mL, respectively. The thermochemical pretreatment was proven a beneficial process as it led to higher productions of TP. FTIR and SEM were used to analyze the deterioration levels of the substrate. The present work was used to explore the sustainable management of PPW, which is a highly neglected substrate bioresource but is excessively dumped in open environment, raising environmental concerns. The cost-effective methods for the breakdown of PPW starch into fermentable sugars might be utilized to extract valuable compounds.

Characterization of Thermostable Cellulase from Bacillus licheniformis PANG L Isolated from the Himalayan Soil

This study aimed to isolate, purify, and characterize a potential thermophilic cellulase-producing bacterium from the Himalayan soil. Eleven thermophilic bacteria were isolated, and the strain PANG L was found to be the most potent cellulolytic producer. Morphological, physiological, biochemical, and molecular characterization identified PANG L as Bacillus licheniformis. This is the first study on the isolation of thermostable cellulase-producing Bacillus licheniformis from the Himalayan soil. This bacterium was processed for the production of cellulase enzyme. The optimum conditions for cellulase production were achieved at 45°C after 48 h of incubation at pH 6.5 in media-containing carboxymethyl cellulose (CMC) and yeast extract as carbon and nitrogen sources, respectively, in a thermo-shaker at 100 rpm. The enzyme was partially purified by 80% ammonium sulphate precipitation followed by dialysis, resulting in a 1.52-fold purification. The optimal activity of partially purified cellulase was observed at a temperature of 60°C and pH 5. The cellulase enzyme was stable within the pH ranges of 3-5 and retained 67% of activity even at 55°C. Cellulase activity was found to be enhanced in the presence of metal ions such as Cd2+, Pb2+, and Ba2+. The enzyme showed the highest activity when CMC was used as a substrate, followed by cellobiose. The Km and Vmax values of the enzyme were 1.8 mg/ml and 10.92 μg/ml/min, respectively. The cellulase enzyme obtained from Bacillus licheniformis PANG L had suitable catalytic properties for use in industrial applications.

Production Optimization and Biochemical Characterization of Cellulase from Geobacillus sp. KP43 Isolated from Hot Spring Water of Nepal

This study is aimed at isolating and identifying a thermophilic cellulolytic bacterium from hot spring water and characterizing thermostable cellulase produced by the isolate. Enrichment and culture of water sample was used for isolation of bacterial strains and an isolate with highest cellulase activity was chosen for the production, partial purification, and biochemical characterization of the enzyme. Different staining techniques, enzymatic tests, and 16s ribosomal DNA (16s rDNA) gene sequencing were used for the identification of the isolate. The cellulase producing isolate was Gram positive, motile, and sporulated rod-shaped bacterium growing optimally between 55°C and 65°C. Based on partial 16s rDNA sequence analysis, the isolate was identified as Geobacillus sp. and was designated as Geobacillus sp. KP43. The cellulase enzyme production condition was optimized, and the product was partially purified and biochemically characterized. Optimum cellulase production was observed in 1% carboxymethyl cellulose (CMC) at 55°C. The molecular weight of the enzyme was found to be approximately 66 kDa on 12% SDS-PAGE analysis. Biochemical characterization of partially purified enzyme revealed the temperature optimum of 70°C and activity over a wide pH range. Further, cellulase activity was markedly stimulated by metal ion Fe^2+. Apart from cellulases, the isolate also depicted good xylanase, cellobiase, and amylase activities. Thermophilic growth with a variety of extracellular enzyme activities at elevated temperature as well as in a wide pH range showed that the isolated bacteria, Geobacillus sp. KP43, can withstand the harsh environmental condition, which makes this organism suitable for enzyme production for various biotechnological and industrial applications.

Coconut Mesocarp-Based Lignocellulosic Waste as a Substrate for Cellulase Production from High Promising Multienzyme-Producing Bacillus amyloliquefaciens FW2 without Pretreatments

Facing the crucial issue of high cost in cellulase production from commercial celluloses, inexpensive lignocellulosic materials from agricultural wastes have been attractive. Therefore, several studies have focused on increasing the efficiency of cellulase production by potential microorganisms capable of secreting a high and diversified amount of enzymes using agricultural waste as valuable substrates. Especially, extremophilic bacteria play an important role in biorefinery due to their high value catalytic enzymes that are active even under harsh environmental conditions. Therefore, in this study, we aim to investigate the ability to produce cellulase from coconut-mesocarp of the potential bacterial strain FW2 that was isolated from kitchen food waste in South Korea. This strain was tolerant in a wide range of temperature (−6–75 °C, pH range (4.5–12)) and at high salt concentration up to 35% NaCl. The molecular weight of the purified cellulase produced from strain FW2 was estimated to be 55 kDa. Optimal conditions for the enzyme activity using commercial substrates were found to be 40–50 °C, pH 7.0–7.5, and 0–10% NaCl observed in 920 U/mL of CMCase, 1300 U/mL of Avicelase, and 150 U/mL of FPase. It was achieved in 650 U/mL, 720 U/mL, and 140 U/mL of CMCase, Avicelase, and FPase using coconut-mesocarp, respectively. The results revealed that enzyme production by strain FW2 may have significant commercial values for industry, argo-waste treatment, and other potential applications.

Biochemical Characterization of Cellulase From Bacillus subtilis Strain and its Effect on Digestibility and Structural Modifications of Lignocellulose Rich Biomass

Microbial cellulases have become the mainstream biocatalysts due to their complex nature and widespread industrial applications. The present study reports the partial purification and characterization of cellulase from Bacillus subtilis CD001 and its application in biomass saccharification. Out of four different substrates, carboxymethyl cellulose, when amended as fermentation substrate, induced the highest cellulase production from B. subtilis CD001. The optimum activity of CMCase, FPase, and amylase was 2.4 U/ml, 1.5 U/ml, and 1.45 U/ml, respectively. The enzyme was partially purified by (NH₄)₂SO₄ precipitation and sequenced through LC-MS/MS. The cellulase was found to be approximately 55 kDa by SDS-PAGE and capable of hydrolyzing cellulose, as confirmed by zymogram analysis. The enzyme was assigned an accession number AOR98335.1 and displayed 46% sequence homology with 14 peptide-spectrum matches having 12 unique peptide sequences. Characterization of the enzyme revealed it to be an acidothermophilic cellulase, having an optimum activity at pH 5 and a temperature of 60°C. Kinetic analysis of partially purified enzyme showed the Km and Vmax values of 0.996 mM and 1.647 U/ml, respectively. The enzyme activity was accelerated by ZnSO_4, MnSO_4, and MgSO_4, whereas inhibited significantly by EDTA and moderately by β-mercaptoethanol and urea. Further, characterization of the enzyme saccharified sugarcane bagasse, wheat straw, and filter paper by SEM, ATR-FTIR, and XRD revealed efficient hydrolysis and structural modifications of cellulosic materials, indicating the potential industrial application of the B. subtilis CD001 cellulase. The findings demonstrated the potential suitability of cellulase from B. subtilis CD001 for use in current mainstream biomass conversion into fuels and other industrial processes.

Thermostable cellulose saccharifying microbial enzymes: Characteristics, recent advances and biotechnological applications

Cellulases play a promising role in the bioconversion of renewable lignocellulosic biomass into fermentable sugars which are subsequently fermented to biofuels and other value-added chemicals. Besides biofuel industries, they are also in huge demand in textile, detergent, and paper and pulp industries. Low titres of cellulase production and processing are the main issues that contribute to high enzyme cost. The success of ethanol-based biorefinery depends on high production titres and the catalytic efficiency of cellulases functional at elevated temperatures with acid/alkali tolerance and the low cost. In view of their wider application in various industrial processes, stable cellulases that are active at elevated temperatures in the acidic-alkaline pH ranges, and organic solvents and salt tolerance would be useful. This review provides a recent update on the advances made in thermostable cellulases. Developments in their sources, characteristics and mechanisms are updated. Various methods such as rational design, directed evolution, synthetic & system biology and immobilization techniques adopted in evolving cellulases with ameliorated thermostability and characteristics are also discussed. The wide range of applications of thermostable cellulases in various industrial sectors is described.

Bioprocess development for enhanced endoglucanase production by newly isolated bacteria, purification, characterization and in-vitro efficacy as anti-biofilm of Pseudomonas aeruginosa

Endoglucanase producing bacteria were isolated from Egyptian soils and the most active bacterial strain was identified as Bacillus subtilis strain Fatma/1. Plackett-Burman statistical design was carried out to assess the effect of seven process variables on endoglucanase production. Carboxymethyl cellulose (CMC), yeast extract and peptone were the most significant variables that enhanced the endoglucanase production and thus were selected for further optimization using face-centered central composite design. The highest yield of endoglucanase (32.37 U/mL) was obtained in run no. 9, using 18 g/L CMC, 8 g/L peptone, 7 g/L yeast extract and 0.1 g/L FeSO₄.7H₂O. The optimized medium showed about eightfold increase in endoglucanase production compared to the unoptimized medium. The produced crude enzyme was further purified by ammonium sulfate precipitation, then DEAE-Sepharose CL6B column. The purified enzyme was shown to have a molecular weight of 37 kDa. The enzyme showed maximum activity at pH 8.0, temperature of 50 °C, incubation time of 60 min. The half-life time (T_1/2) was 139.53 min at 50 °C, while being 82.67 min at 60 °C. Endoglucanase at concentration of 12 U/mL effectively removed 84.61% of biofilm matrix of Pseudomonas aeruginosa with marked reduction in carbohydrate content of the biofilm from 63.4 to 7.9 μg.

A novel thermostable cellulase-producing Bacillus licheniformis A5 acts synergistically with Bacillus subtilis B2 to improve degradation of Chinese distillers' grains

Lack of effective degradation approaches of Chinese distillers' grains (CDGs) produced by Chinese liquor industry results in environmental pollution and economic waste. Cellulase activity was characterized at different temperatures to find thermostable cellulase-producing bacteria, and microbial co-culture method was used to improve the degradation of CDGs. Incubation of endoglucanase produced by Bacillus licheniformis A5 at 80 °C for 120 min showed 82% residual enzyme activity. Notably, enzyme activity increased by 30%-70% after co-culturing Bacillus licheniformis A5 and Bacillus subtilis B2. The two strains increased degradation rate of CDGs by 70% compared with optimized results of Bacillus subtilis B2 culture alone, and increased the reducing sugar content to 16.6 mg/mL. In addition, 2% ethanol increased degradation rate of CDGs by 15% in co-culture. The findings of this study imply that Bacillus licheniformis A5 acts synergistically with Bacillus subtilis B2 to improve degradation of CDGs.

Response surface optimization of cellulase production from Aneurinibacillus aneurinilyticus BKT-9: An isolate of urban Himalayan freshwater

Due to their vast industrial potential, cellulases have been regarded as the potential biocatalysts by both the academicians and the industrial research groups. In the present study, culturable bacterial strains of Himalayan Urban freshwater lake were investigated for cellulose degrading activities. Initially, a total of 140 bacterial strains were isolated and only 45 isolates were found to possess cellulose degrading property. On the basis of preliminary screening involving cellulase activity assay on CMC agar (with clear zone of hydrolysis) and biosafety assessment testing, only single isolate named as BKT-9 was selected for the cellulase production studies. Strain BKT-9 was characterized at the molecular level using rRNA gene sequencing and its sequence homology analysis revealed its identity as Aneurinibacillus aneurinilyticus. Further, various physico-chemical parameters and culture conditions were optimized using one factor approach to enhance cellulase production levels in the strain BKT-9. Subsequently, RSM based statistical optimization led to formulation of cellulase production medium, wherein the bacterial strain exhibited ~60 folds increase in enzyme activity as compared to un-optimized culture medium. Further studies are being suggested to scale up cellulase production in A. aneurinilyticus strain BKT-9 so that it can be utilized for biomass saccharification at an industrial level.

Biochemical and Molecular Characterization of Five Bacillus Isolates Displaying Remarkable Carboxymethyl Cellulase Activities

Cellulases have many useful applications in industry and biotechnology. So, identification of new bacterial strains expressing cellulases with better properties is desired. Five soil bacterial strains screened for high carboxymethyl cellulase (CMCase) activities were characterized and identified by 16S rRNA analysis as Bacillus amyloliquefaciens (FAY088), B. velezensis (FAY0103), B. tequilensis (FAY0117), B. subtilis (FAY0136), and B. subtilis (FAY0182). Their CMCase activities were 1.49, 1.26, 1.21, 1.21, and 1.24 U/ml, respectively. The maximum CMCase production was attained by growth at 35 °C, pH 6, and 180 rpm for 5 days. Residual activities of CMCases from FAY088 and FAY0117 were 88% or more after growth at 40 °C, which is same as FAY0182 CMCase at 40 and 45 °C. Additionally, FAY0182 retained 73% residual activity at 50 °C. FAY088 and FAY0182 retained more than 85% at pH 7 and 8. Conversely, residual activities from FAY0103 and FAY0136 declined a lot by increasing growth temperature beyond 40 °C and pH beyond 7. The maximum CMCase stability in all isolates was observed at pH 7, 3-h incubation, and 40 °C except for FAY0103 CMCase showed optimum temperature at 30 °C. More than 70% CMCase stability was retained in case of FAY088 at 50 °C, FAY0117 at 50-70 °C, and FAY0136 at 50-60 °C. FAY088 CMCase seemed to be the lest sensitive to temperature variation as it displayed residual activities 67, 72, 78, 84, 77, 74, and 72% at pH 3, 4, 5, 6, 8, 9, and 10, respectively. Finally, the five CMCase-producing isolates are recommended further enzyme applications in biotechnology and industry.

Comparative Analysis of Structural Variations Due to Genome Shuffling of Bacillus Subtilis VS15 for Improved Cellulase Production

Cellulose is one of the most abundant and renewable biomass products used for the production of bioethanol. Cellulose can be efficiently hydrolyzed by Bacillus subtilis VS15, a strain isolate obtained from decomposing logs. A genome shuffling approach was implemented to improve the cellulase activity of Bacillus subtilis VS15. Mutant strains were created using ethyl methyl sulfonate (EMS), N-Methyl-N′ nitro-N-nitrosoguanidine (NTG), and ultraviolet light (UV) followed by recursive protoplast fusion. After two rounds of shuffling, the mutants Gb2, Gc8, and Gd7 were produced that had an increase in cellulase activity of 128%, 148%, and 167%, respectively, in comparison to the wild type VS15. The genetic diversity of the shuffled strain Gd7 and wild type VS15 was compared at whole genome level. Genomic-level comparisons identified a set of eight genes, consisting of cellulase and regulatory genes, of interest for further analyses. Various genes were identified with insertions and deletions that may be involved in improved celluase production in Gd7. Strain Gd7 maintained the capability of hydrolyzing wheatbran to glucose and converting glucose to ethanol by fermentation with Saccharomyces cerevisiae of the wild type VS17. This ability was further confirmed by the acidified potassium dichromate (K₂Cr₂O₇) method.

Production, purification and characterization of an acid/alkali and thermo tolerant cellulase from Schizophyllum commune NAIMCC-F-03379 and its application in hydrolysis of lignocellulosic wastes

A cellulase producing fungus Schizophyllum commune NAIMCC-F-03379 was isolated from decomposed leaf sample of Lantana camera. The nutritional components (wheat bran, magnesium sulphate and calcium chloride concentrations) and physical parameters (temperature and pH) were optimised by response surface methodology for enhanced cellulase production by S. commune NAIMCC-F-03379. The optimized medium contained: 1% (w/v) wheat bran, 0.3 g/L MgSO_4, 0.8–1.0 g/L CaCl₂, optimum temperature and pH were 25 °C and 5 respectively. Under optimum condition, 5.35-fold increase in CMCase and 6.62-fold increase in FPase activity was obtained as compared to un-optimized condition. Crude cellulase enzyme was subjected to different purification techniques and comparative evaluation of their efficiency was performed. The aqueous two-phase system using polyethylene glycol 8000/MnSO₄ system showed maximum purification with 10.4-fold increase in activity, 79.5% yield and 0.5 partition coefficient. The cellulase enzyme obtained from S. commune NAIMCC-F-03379 has shown high stability i.e. more than 55% relative activity after 12 h of incubation over wide range of temperature (25–65 °C) and pH (3–10). The molecular weight of the cellulase enzyme was estimated as ~ 60 kDa by using sodium dodecyl sulphate-polyacrylamide electrophoresis (SDS-PAGE) and zymography. K_m and V_max value of cellulase on carboxy-methyl cellulose were obtained as 0.0909 mg/mL and 45.45 μmol/min mg respectively. Rice straw and wheat bran were subjected to hydrolysis using cellulase and cellulase–xylanase cocktail and analysed by thin layer chromatography and high performance liquid chromatography (HPLC). The HPLC analysis showed glucose concentration of 1.162 mg/mL after enzymatic hydrolysis of rice straw.

Carboxymethyl cellulase production optimization from Glutamicibacter arilaitensis strain ALA4 and its application in lignocellulosic waste biomass saccharification

In this context, carboxymethyl cellulase (CMCase) production from Glutamicibacter arilaitensis strain ALA4 was initially optimized by one factor at a time (OFAT) method using goat dung as proficient feedstock. Two-level full factorial design (2⁵ factorial matrix) using first-order polynomial model revealed the significant (p < 0.05) influence of pH, moisture, and peptone on CMCase activity. Central composite design at N = 20 was further taken into account using a second-order polynomial equation, and thereby liberated maximum CMCase activity of 4925.56 ± 31.61 U/g in the goat dung medium of pH 8.0 and 100% moisture containing 1% (w/w) peptone, which was approximately two fold increment with respect to OFAT method. Furthermore, the partially purified CMCase exhibited stability not only at high pH and temperature but also in the presence of varied metal ions, organic solvents, surfactants, and inhibitors with pronounced residual activities. The enzymatic hydrolysis using partially purified CMCase depicted the maximum liberation of fermentable sugars from alkali pretreated lignocellulosic wastes biomass in the order of paddy straw (13.8 ± 0.15 mg/g) > pomegranate peel (9.1 ± 0.18 mg/g) > sweet lime peel (8.37 ± 0.16 mg/g), with saccharification efficiency of 62.1 ± 0.8, 40.95 ± 0.4, and 37.66 ± 0.4%, respectively after 72 hr of treatment.