Hydraulic retention time and pH affect the performance and microbial communities of passive bioreactors for treatment of acid mine drainage

Sulphidogenic Bioprocesses for Acid Mine Water Treatment and Selective Recovery of Arsenic and Metals

Human communities need water and mineral resources, the supply of which requires the implementation of recycling and saving strategies. Both closed and active mining sites could beneficiate of the implementation of nature-based solutions, including bioreactors involving sulphate-reducing prokaryotes (SRP), in order to separate and recover arsenic (As) and metals from aqueous stream while producing clean water. Selective precipitation strategies can be designed based on the selection of microbial communities adapted to the pH conditions, generally acidic, and to available low-cost electron donors. Laboratory batch and continuous experiments must be implemented for each type of mine water in order to determine the optimal flow-sheet in which As could be precipitated as sulphides (orpiment or realgar), inside the bioreactor or offline, through stripping of biologically produced hydrogen sulphides (H2S). The respective concentrations and proportions of As and metals and the initial acid mine drainage pH are key parameters that will influence the feasibility of efficient selective precipitation. SRP-based bioreactors could be combined with complementary treatment steps in optimised mine water management solutions that will minimise the production of As-contaminated end-solid waste.

High Efficacy Two-Stage Metal Treatment Incorporating Basic Oxygen Furnace Slag and Microbiological Sulfate Reduction

Lignocellulosic sulfate-reducing biochemical reactors (SRBRs) can be implemented as passive treatment for mining-influenced water (MIW) mitigating the potentially deleterious effects of MIW acidic pH, and high concentrations of metal(loid)s and SO42-. In this study, a novel two-stage treatment for MIW was designed, where basic oxygen furnace slag (slag stage) and microbial SO42- reduction (SRBR stage) were incorporated in series. The SRBRs contained spent brewing grains or sugarcane bagasse as sources of lignocellulose. The slag reactor removed >99% of the metal(loid) concentration present in the MIW (130 ± 40 mg L-1) and increased MIW pH from 2.6 ± 0.2 to 12 ± 0.3. The alkaline effluent pH of the slag reactor was mitigated by remixing slag effluent with acidic MIW before SRBR treatment. The SRBR stage removed the bulk of SO42- from MIW, additional metal(loid)s, and yielded a circumneutral effluent pH. Cadmium, copper, and zinc showed high removal rates in SRBRs (≥96%) and likely precipitated as sulfide minerals. The microbial communities developed in SRBRs were enriched in hydrolytic, fermentative, and sulfate-reducing taxa. However, the SRBRs developed distinct community compositions due to the different lignocellulose sources employed. Overall, this study underscores the potential of a two-stage treatment employing steel slag and SRBRs for full-scale implementation at mining sites.

Effects of biochar layer position on treatment performance and microbial community in subsurface flow constructed wetlands for removal of cadmium and lead

Levels of cadmium (Cd) and lead (Pb) correspond to common composition in acid mine wastewater of Hunan Province of China. The removal path of Cd and Pb and the structure of microbial community were investigated by developing constructed wetlands (CWs) with different layer positions of biochar. The biochar as a layer at the bottom of CW (BCW) system exhibited maximum Cd and Pb removal efficiencies of 96.6-98.6% and 97.2-98.9%, respectively. Compared with original soil, BCW increased the relative proportions of Proteobacteria, Firmicutes, Acidobacteriota, Verrucomicrobiota, Desulfobacterota, Armatimonadota, Bacteroidota, Patescibacteria, Basidiomycota (phylum level) and Burkholderia-Caballeronia-Paraburkholderia, Citrifermentans, Chthonomonadales, Cellulomonas, Geothrix, Terracidiphilus, Gallionellaceae, Microbacterium, Vanrija, Apiotrichum, Saitozyma, Fusarium (genus level). The concentrations of Cd and Pb were positively correlated with the abundance of Verrucomicrobiota, Basidiomycota (phylum level), and Methylacidiphilaceae, Meyerozyma, Vanrija (genus level). This study demonstrates that BCW system can improve removal performance toward Cd and Pb, as well as alter microbial community.

Geochemical Modeling of Heavy Metal Removal from Acid Mine Drainage in an Ethanol-Supplemented Sulfate-Reducing Column Test

A passive treatment process using sulfate-reducing bacteria (SRB) is known to be effective in removing heavy metals from acid mine drainage (AMD), though there has been little discussion of the mechanism involved to date. In this work, a sulfate-reducing column test was carried out using supplementary ethanol as an electron donor for microorganisms, and the reaction mechanism was examined using geochemical modeling and X-ray absorption fine structure (XAFS) analysis. The results showed that Cu was readily removed from the AMD on the top surface of the column (0-0.2 m), while Zn and Cd depletion was initiated in the middle of the column (0.2-0.4 m), where sulfide formation by SRB became noticeable. Calculations by a developed geochemical model suggested that ethanol decomposition by aerobic microbes contributed to the reduction of Cu, while sulfide produced by SRB was the major cause of Zn and Cd removal. XAFS analysis of column residue detected ZnS, ZnSO4 (ZnS oxidized by atmospheric exposure during the drying process), and CuCO3, thus confirming the validity of the developed geochemical model. Based on these results, the application of the constructed geochemical model to AMD treatment with SRB could be a useful approach in predicting the behavior of heavy metal removal.

Insights into the effects of operating parameters on sulfate reduction performance and microbial pathways in the anaerobic sequencing batch reactor

Sulfate-reducing bacteria (SRB)-based anaerobic process has aroused wide concern in the treatment of sulfate-containing wastewater. Chemical oxygen demand-to-sulfate ratio (COD/SO42-) and HRT are two key factors that affect not only the anaerobic treatment performance but also the activity of SRB. In this study, an anaerobic sequencing batch reactor was constructed, and the effects of different operating parameters (COD/SO42-, HRT) on the relationship of sulfate (SO42-) reduction performance, microbial communities, and metabolic pathways were comprehensively investigated. The results indicated that the SO42- removal rates could achieve above 95% under different operating parameters. Bioinformatics analysis revealed that microbial community changed with reactor operation. At the genus level, the enrichment of Propionicclava and Peptoclostridium contributed to the establishment of a homotrophic relationship with Desulfobulbus, the dominant SRB in the reactor, which indicated that they took vital part in maintaining the structural and functional stability of the bacterial community under different operating parameters. In particular, an increasing trend of the relative abundance of functional genes encoding dissimilatory sulfate reduction was detected with the increase of COD/SO42-, which indicated high SO42- reduction potentials. This knowledge will help to reveal the mechanism of the effect of operating parameters on the anaerobic sulfate removal process, thus providing effective guidance for the targeted regulation of anaerobic sequencing batch bioreactors treating SO42--containing wastewater.

Changes in the prokaryotic diversity in response to hydrochemical variations during an acid mine drainage passive treatment

Acid mine drainage (AMD) causes major environmental problems and consequently, several treatments are proposed, favoring the passive systems because of their many advantages. The main goal of these procedures is the neutralization and removal of potentially toxic elements (PTE), yet little is known about the changes in the microbial assemblages in response to the hydrochemical variations during the treatments. Therefore, the main objective of this research was to determine the changes in the diversity and structure of the prokaryotic assemblages in a hybrid abiotic and biological (wetland) passive treatment system. The 16S rRNA gene survey showed that the AMD coming from the mine (pH 2.6) was mainly composed of acidophilic genera such as Acidithiobacillus, Leptospirillum, Ferritrophicum, and Cuniculiplasma (up to 76 % relative abundance). In the abiotic treatment, Acidiphilium was dominant in the sections with limestone filters (pH 2.2-4.8), followed by Limnobacter in the subsequent dolomite/limestone and phosphoric rock filters (pH 5.2-5.8). In these abiotic passive treatment sections, the microbial assemblage showed a limited diversity and richness. However, when the treated AMD reached the two final wetlands (pH ~6.8), the microbial diversity and richness increased, suggesting that further bioattenuation mechanisms might be occurring. Limnobacter and Novosphingobium were the main bacterial genera in the water samples of the wetland sections (Arundo donax). These changes in the composition of the microbial assemblages were highly correlated with the pH and Eh values during the treatment (p-value <0.001); however, the concentration of metal(loid)s such as Al, Cd, Fe, Mn, Ni, and Zn were also significantly related (p-value <0.05). In conclusion, the studied passive AMD treatment system enhanced the chemical quality of the treated AMD, showing high removal efficiencies for Al and Fe (> 99 %), and increasing the microbial diversity and richness in the effluent.

Metagenomic Analysis of Biochemical Passive Reactors During Acid Mine Drainage Bioremediation Reveals Key Co-selected Metabolic Functions

Acid mine drainage (AMD) is the major pollutant generated by the mining industry, and it is characterized by low pH and high concentration of metals and sulfate. The use of biochemical passive reactors (BPRs) is a promising strategy for its bioremediation. To date, there are various studies describing the taxonomical composition of BPR microbial communities, generally consisting of an assemblage of sulfate-reducing organisms inside Deltaproteobacteria, and a diverse set of anaerobic (ligno)cellulolytic bacteria; however, insights about its functional metagenomic content are still scarce. In previous studies, a laboratory-scale AMD bioremediation using biochemical passive reactors was designed and performed, tracking operation parameters, chemical composition, and changes, together with taxonomic composition of the microbiomes harbored in these systems. In order to reveal the main functional content of these communities, we used shotgun metagenomics analyses to explore genes of higher relative frequencies and their inferred functions during the AMD bioremediation from three BPRs representing the main microbiome compositions detected in the system. Remarkably, genes encoding for two-component regulatory systems and ABC transporters related to metal and inorganic ions, cellulose degradation enzymes, dicarboxylic acid production, and sulfite reduction complex were all detected at increased frequency. Our results evidenced that higher taxonomic diversity of the microbiome was arising together with a functional redundancy of the specific metabolic roles, indicating its co-selection and suggesting that its enrichment on BPRs may be implicated in the cumulative efficiency of these systems.

Development of Artificial Geochemical Filter to Treat Acid Mine Drainage for Safe Disposal of Mine Water in Salt Range Portion of Indus Basin—A Lab to Pilot Scale Study

Several passive and active treatment approaches are available for dealing with Acid Mine Drainage (AMD). Despite a range of newly emergent techniques for the treatment of AMD, pH control using low-cost neutralizing reagents has been the most common and economical technique for the treatment of AMD. Thereby, owing to their widespread availability, ease of use, and cost effectiveness, active treatment techniques utilizing calcium-based reagents (particularly limestone) are considered the prime choice for treating AMD. Limestone is a well-known option worldwide for AMD neutralization thanks to its easy availability, low cost, and excellent efficiency. Generally, acidity is reduced by the presence of CaCO3 and alkalinity (i.e., HCO−3) is increased. pH can be increased from 2.5 to 7.5 by using limestone as a treating agent, resulting in the precipitation of heavy metals, which can then be removed by precipitation and sorption. Wargal limestone, a well-known limestone from the Salt Range, Indus basin, Pakistan, has high potential for neutralization and treatment of PTEs present in mine water or AMD. After selecting a suitable neutralization material at pilot scale, two different filters were designed using selected Wargal limestone: Filter 1 A (Oxic-based, Vertical bed-type Wargal Limestone Filter) and Filter 1 B (Anoxic-based Vertical bed-type Wargal Limestone Filter with Compost). The pH of the AMD under study was elevated from 2.5 to 7.65 and 7.60, respectively, in uncoated and coated media of limestone. Although the neutralization potential decreased over time, as an overall phenomenon the Ca concentration and net alkalinity (280–360 mg/L) were increased with the removal of metals such as Fe, Cu, Pb and Mn. The respective removal efficiency of these metals was 98%, 99%, 99% and 60%, with a threshold residence time of 5 h. in all columns of the developed filters.

Effective co-treatment of synthetic acid mine drainage and domestic sewage using multi-unit passive treatment system supplemented with silage fermentation broth as carbon source

A multi-unit passive treatment system was constructed for co-treatment of synthetic acid mine drainage (AMD) and domestic sewage supplemented with silage fermentation broth as carbon source. AMD and domestic sewage mixing pretreatment (unit 1) improved influent quality with pH increase, metals removal and nutrients supplement. The generated metal-rich sludge in unit 1 retained the metals (69.95% of Fe, 97.36% of Cu, 96.53% of Cd, 72.52% of Zn, and 8.59% of Mn) of influent prior to entering subsequent bioreactors. Silage fermentation broth performed well to promote bacterial sulfate reduction in sulfate reducing bioreactor system (unit 2). Residual metals (Mn) and organic/nutrient pollutants were further polished in surface-flow aerobic wetland (unit 3), where relatively high pH (7.4-8.6), aerobic condition, potential Mn-oxidizing bacteria, limestone layer and low concentrations of Fe(II) (0.04-3.5 mg/L) favored the efficient removal of Mn. After 210-day continuous flow-through experiment, this passive treatment system demonstrated the efficient performance, increasing pH from 2.5 to 8.0 with removal of metals (99%), sulfate and organic/nutrient pollutants. Diverse sulfate reducing bacteria including complete organic oxidizers (e.g. Desulfobacter) and incomplete organic oxidizers (e.g. Desulfovibrio) promoted sulfate reduction and organic/nutrient pollutants removal. Ammonia oxidizing bacteria (e.g. Nitrosomonas) and nitrite oxidizing bacteria (e.g. unidentified_Nitrospiraceae) were the potential nitrifiers for ammonia removal. Collaboration of anaerobic denitrifiers (e.g. Denitratisoma) and potential heterotrophic nitrifying and aerobic denitrifiers (HN-AD) achieved effective nitrate removal. This multi-unit treatment system with domestic sewage and silage fermentation broth as stimulation substrates provided an attractive option for AMD treatment.

Acid mine drainage treatment using zero-valent iron nanoparticles in biochemical passive reactors

Acid mine drainage (AMD) is the major effluent generated from metal and coal mines, causing serious ecological risks and degradation of aquatic habitats and surrounding soil quality. Biochemical passive reactors (BPRs) are an option for improving AMD affected water. This study investigates the effect of the size and concentration of zerovalent iron nanoparticles (nZVI) on the efficiency of batch BPRs during AMD remediation. Atomic force microscopy (AFM) and transmission electron microscopy (TEM) were also used as complementary techniques for the investigation of the changes in microbial cells and nZVI properties after the AMD remediation. The results from the batch experiment showed that the concentration of nZVI increases the pH and decreases ORP during AMD treatment, thus favouring the removal of metals. The results also suggest that metal sulfide precipitation occurred in all the batch with reactive mixture but was greater in reactors amended with nZVI of larger size. This study revealed that the presence of nZVI in the BPR leads to metal removal as well as the inhibition of sulfate-reducing bacteria (SRB) activity. Microscopy study indicated that the addition of nZVI creates a morphological change on certain microorganisms in which the cellular membrane was fully covered with nZVI, inducing cell lysis process. These results show that nZVI is a promising reactive material for the treatment of AMD in BPR systems.

Meta-analysis of diazotrophic signatures across terrestrial ecosystems at the continental scale

Biological nitrogen fixation performed by diazotrophs forms a cornerstone of Earth's terrestrial ecosystem productivity. However, the composition, diversity and distribution of soil diazotrophs are poorly understood across different soil ecosystems. Furthermore, the biological potential of the key diazotroph species in relation to key environmental parameters is unknown. To address this, we used meta-analysis approach to merge together 39 independent diazotroph amplicon sequencing (nifH gene) datasets consisting of 1988 independent soil samples. We then employed multiple statistical analyses and machine-learning approaches to compare diazotroph community differences and indicator species between terrestrial ecosystems on a global scale. The distribution, composition and structure of diazotroph communities varied across seven different terrestrial ecosystems, with community composition exhibiting an especially clear effect. The Cyanobacteria were the most abundant taxa in crust ecosystems (accounting for ~45% of diazotrophs), while other terrestrial ecosystems were dominated by Proteobacteria, including Alpha-, Beta- and Gamma-Proteobacteria (accounting for ~70% of diazotrophs). Farmland ecosystems harboured the highest and crust ecosystems the lowest alpha and phylogenetic diversities. Azospirillum zeae, Skermanella aerolata and four Bradyrhizobium species were identified as key indicator species of potential diazotroph activity. Overall, diazotroph abundances and distribution were affected by multiple environmental parameters, including soil pH, nitrogen, organic carbon, C:N ratio and annual mean precipitation and temperature. Together, our findings suggest that based on the relative abundance and diversity of nifH marker gene, diazotrophs have adapted to a range of environmental niches globally.

Experimental Study on the Hydroponics of Wetland Plants for the Treatment of Acid Mine Drainage

Acid Mine Drainage (AMD) has become an important issue due to its significant ecological pollution. In this paper, phytoremediation technology and mechanism for AMD were investigated by hydroponic experiments, using six wetland plants (Phragmites australis, Typha orientalis, Cyperus glomeratus, Scirpus validus, Iris wilsonii, Juncus effusus) as research objects. The results showed that (1) the removal of sulfate from AMD was highest for Juncus effusus (66.78%) and Iris wilsonii (40.74%) and the removal of Mn from AMD was highest for Typha orientalis (>99%) and Phragmites australis (>99%). In addition, considering the growth condition of the plants, Juncus effusus, Iris wilsonii, and Phragmites australis were finally selected as the dominant plants for the treatment of AMD. (2) The removal pathway of pollutants in AMD included two aspects: one part was absorbed by plants, and the other part was removed through hydrolysis and precipitation processes. Our findings provide a theoretical reference for phytoremediation technology for AMD.

Optimal start-up conditions for the efficient treatment of acid mine drainage using sulfate-reducing bioreactors based on physicochemical and microbiome analyses

Typically, sulfate-reducing bioreactors used to treat acid mine drainage (AMD) undergo an initial incubation period of a few weeks to acclimatize sulfate-reducing bacteria (SRB), although necessity of this preincubation has rarely been evaluated. To reduce time and economic cost, we developed an SRB acclimatization method using the continuous flow of AMD into bioreactors fed with rice bran, and compared with the conventional acclimatization method. We found that the SRB sufficiently acclimatized without the preincubation phase. Furthermore, we examined the performance and SRB communities in bioreactors operated for >200 days under seven different conditions, in which the amount of rice bran added and hydraulic retention times (HRTs) were varied. A comparison of the various bioreactor conditions revealed that the lowest rice bran amount (50 g) and the shortest HRT (6 h) caused a deterioration in reactor performance after day 144 and 229, respectively. In both cases, relatively aerobic environments developed due to the lack of organic matter seemed to inhibit sulfate reduction. Of the conditions tested, operation of the bioreactors with 200 g of rice bran and an HRT of 12.5 h was the most effective in treating AMD, showing a sulfate reduction rate of 20.7-77.9% during days 54-242. DATA AND MATERIALS AVAILABILITY: All data needed to evaluate the conclusions of this study are presented in the paper and/or the appendix.

Catchment-scale microbial sulfate reduction (MSR) of acid mine drainage (AMD) revealed by sulfur isotopes

Laboratory experiments and point observations, for instance in wetlands, have shown evidence that microbial sulfate reduction (MSR) can lower sulfate and toxic metal concentrations in acid mine drainage (AMD). We here hypothesize that MSR can impact the fate of AMD in entire catchments. To test this, we developed a sulfur isotope fractionation and mass-balance method, and applied it at multiple locations in the catchment of an abandoned copper mine (Nautanen, northern Sweden). Results showed that MSR caused considerable, catchment-scale immobilization of sulfur corresponding to a retention of 27 ± 15% under unfrozen conditions in the summer season, with local values ranging between 13 ± 10% and 53 ± 18%. Present evidence of extensive MSR in Nautanen, together with previous evidence of local MSR occurring under many different conditions, suggest that field-scale MSR is most likely important also at other AMD sites, where retention of AMD may be enhanced through nature-based solutions. More generally, the developed isotope fractionation analysis scheme provides a relatively simple tool for quantification of spatio-temporal trends in MSR, answering to the emerging need of pollution control from cumulative anthropogenic pressures in the landscape, where strategies taking advantage of MSR can provide viable options.

Enrichment of psychrophilic and acidophilic sulfate-reducing bacterial consortia - a solution toward acid mine drainage treatment in cold regions

Failure of sulfate-reducing bacteria (SRB)-mediated treatment of acid mine drainage (AMD) in cold regions due to inhibition of bacteria by acidic pH and low temperature can be overcome by enriching psychrophilic and acidophilic microbial consortia from local metal-rich sediments. In this study, we enriched microbial consortia from Arctic mine sediments at varying pH (3-7) and temperatures (15-37 °C) under anaerobic conditions with repeated sub-culturing in three successive stages, and analyzed the microbial community using 16S rRNA gene sequencing. The enriched SRB genera resulted in high sulfate reduction (85-88%), and significant metal removal (49-99.9%) during the initial stages (stage 1 and 2). Subsequently, sub-culturing the inoculum at pH 3-4.5 resulted in lower sulfate reduction (9-34%) due to the inhibition of SRB by accumulated acetic acid (0.3-9 mM). The microbial metabolic interactions for successful sulfate and metal removal involved initial glycerol co-fermentation to acetic acid at acidic pH (by Desulfosporosinus, Desulfotomaculum, Desulfurospora, and fermentative bacteria including Cellulomonas and Anaerovorax), followed by acetic acid oxidation to CO₂ and H₂ (by Desulfitobacterium) at neutral pH, and subsequent H₂ utilization (by Desulfosporosinus). The results, including the structural and functional properties of enriched microbial consortia, can inform the development of effective biological treatment strategies for AMD in cold regions.

Nitrate-Driven Trophic Association of Sulfur-Cycling Microorganisms in Tsunami-Deposited Marine Sediment Revealed by High-Sensitivity 13C-Bicarbonate Probing

Although denitrification-dependent chemolithotrophic sulfur oxidizers proliferated in tsunami-deposited marine sediment with nitrate amendment, their ecophysiological roles in biogeochemical carbon transfer are not addressed. We employed time-resolved high-sensitivity ¹³C-bicarbonate probing of rRNA to unveil the carbon fixation and resulting trophic relationship of the nitrate-amended sediment microorganisms. Nitrate reduction and sulfur oxidation co-occurred along with significant decreases in the ¹³CO₂ and dissolved bicarbonate concentrations for the first 4 days of the incubation, during which the denitrification-dependent sulfur-oxidizing chemolithotrophs, i.e., the Sulfurimonas sp. HDS01 and Thioalkalispira sp. HDS22 relatives, and the sulfate-reducing heterotrophs, i.e., the Desulfobulbus spp. and Desulfofustis glycolicus relatives, actively incorporated ¹³C. These indicated that the sulfur oxidizers and sulfate reducers were tightly associated with each other through the direct carbon transfer. Relatives of the fermentative Thalassomonas sediminis and the hydrolytic Pararheinheimera aquatica, in addition to various sulfur-cycling microorganisms, significantly assimilated ¹³C at day 14. Although the incorporation of ¹³C was not detected, a syntrophic volatile-fatty-acid oxidizer and hydrogenotrophic methanogens significantly expressed their 16S rRNA molecules at day 21, indicating the metabolic activation of these final decomposers under the latter nutrient-limited conditions. The results demonstrated the nitrate-driven trophic association of sulfur-cycling microorganisms and the subsequent microbial activation and diversification, triggering the restoration of the marine ecosystem function.

Effective Se reduction by lactate-stimulated indigenous microbial communities in excavated waste rocks

Waste rocks generated from tunnel excavation contain the metalloid selenium (Se) and its concentration sometimes exceeds the environmental standards. The possibility and effectiveness of dissolved Se removal by the indigenous microorganisms are unknown. Chemical analyses and high-throughput 16S rRNA gene sequencing were implemented to investigate the functional and structural responses of the rock microbial communities to the Se and lactate amendment. During anaerobic incubation of the amended rock slurries from two distinct sites, dissolved Se concentrations decreased significantly, which coincided with lactate degradation to acetate and/or propionate. Sequencing indicated that relative abundances of Desulfosporosinus burensis increased drastically from 0.025 % and 0.022% to 67.584% and 63.716 %, respectively, in the sites. In addition, various Desulfosporosinus spp., Symbiobacterium-related species and Brevibacillus ginsengisoli, as well as the Se(VI)-reducing Desulfitobacterium hafniense, proliferated remarkably. They are capable of incomplete lactate oxidation to acetate as only organic metabolite, strongly suggesting their involvement in dissimilatory Se reduction. Furthermore, predominance of Pelosinus fermentans that ferments lactate to propionate and acetate implied that Se served as the electron sink for its fermentative lactate degradation. These results demonstrated that the indigenous microorganisms played vital roles in the lactate-stimulated Se reduction, leading to the biological Se immobilization treatment of waste rocks.

Biostimulation of sulfate-reducing bacteria and metallic ions removal from coal mine-impacted water (MIW) using shrimp shell as treatment agent

This paper comprises several assays aiming to identify the basis for the bioremediation of mine-impacted water (MIW). To do so, the conditions for build anoxic microcosms for treating this effluent were varied, containing MIW, and a source of chitin, to biostimulate sulfate-reducing bacteria (SRB). The chitin sources were: commercial chitin (CHIT) and shrimp shell (SS), which in addition to chitin, contains CaCO₃, and proteins in its composition. The CHIT assays were not successful in sulfate-reduction, even when the pH was increased with CaCO₃. However, in all SS assays the SRB development was successful (85% sulfate removal for assay 3), including the metal-free (MF-SS) assay (75% for assay 5). High-throughput sequencing analysis revealed the structure of bacterial community in the SS assay: the most abundant genera were Clostridium and Klebsiella, both fermentative and chitinase producers; a few SRB from the genera Desulfovibrio and Desulfosporosinus were also detected. In the MF-SS assay, Desulfovibrio genuswas detected but Comamonas was dominant. It could be deduced that SS is a suitable substrate for SRB development, but CHIT is not. The sulfate-reduction process was provided by the cooperation between fermentative/chitinase-producer bacteria together with SRB, which leads to efficient MIW treatment, removing sulfate and metallic ions.

A Cross-Sectional Study of the Gut Microbiota Composition in Moscow Long-Livers

The aim was to assess the gut microbiota of long-livers from Moscow. This study included two groups of patients who signed their consent to participate. The group of long-livers (LL) included 20 participants aged 97–100 years (4 men and 16 women). The second group included 22 participants aged 60–76 years (6 men) without clinical manifestations of chronic diseases (healthy elderly). Gut microbiota was studied by 16S rRNA sequencing. Long-livers underwent a complex geriatric assessment as well as expanded blood biochemistry. Gut microbiota composition in the cohorts was also compared with microbiome in long-livers from Japan and Italy. Russian long-livers’ microbiome contained more beneficial bacteria than healthy elderly including Ruminococcaceae, Christensenellaceae, Lactobacillaceae families. Conditional pathogens like Veillonellaceae, Mogibacteriaceae, Alcaligenaceae, Peptococcaceae, Peptostreptococcaceae were more abundant in the healthy elderly. Compared with Italian and Japanese microbiome LL, the Russian LL appeared to be more similar to the Italian cohort. Bifidobacterium/Coprococcus and Faecalibacterium/Coprococcus balances were associated with femoral and carotid intima–media thickness, respectively. Bifidobacterium/Coriobacteriaceae balance was assessed with the folic acid level and Faecalibacterium/Coriobacteriaceae_u the with Mini Nutritional Assessment score. Long-livers’ microbiome appeared to be unexpectedly balanced. The high representation of beneficial bacteria in long-livers may prevent them from low-grade inflammation and thus protect them from the development of atherosclerosis and other aging-associated conditions.

System Performance Corresponding to Bacterial Community Succession after a Disturbance in an Autotrophic Nitrogen Removal Bioreactor

Performance of a bioreactor is affected by complex microbial consortia that regulate system functional processes. Studies so far, however, have mainly emphasized the selective pressures imposed by operational conditions (i.e., deterministic external physicochemical variables) on the microbial community as well as system performance, but have overlooked direct effects of the microbial community on system functioning. Here, using a bioreactor with ammonium as the sole substrate under controlled operational settings as a model system, we investigated succession of the bacterial community after a disturbance and its impact on nitrification and anammox (anaerobic ammonium oxidation) processes with fine-resolution time series data. System performance was quantified as the ratio of the fed ammonium converted to anammox-derived nitrogen gas (N₂) versus nitrification-derived nitrate (npNO₃ ^-). After the disturbance, the N₂/npNO₃ ^- ratio first decreased, then recovered, and finally stabilized until the end. Importantly, the dynamics of N₂/npNO₃ ^- could not be fully explained by physicochemical variables of the system. In comparison, the proportion of variation that could be explained substantially increased (tripled) when the changes in bacterial composition were taken into account. Specifically, distinct bacterial taxa tended to dominate at different successional stages, and their relative abundances could explain up to 46% of the variation in nitrogen removal efficiency. These findings add baseline knowledge of microbial succession and emphasize the importance of monitoring the dynamics of microbial consortia for understanding the variability of system performance.IMPORTANCE Dynamics of microbial communities are believed to be associated with system functional processes in bioreactors. However, few studies have provided quantitative evidence. The difficulty of evaluating direct microbe-system relationships arises from the fact that system performance is affected by convolved effects of microbiota and bioreactor operational parameters (i.e., deterministic external physicochemical forcing). Here, using fine-resolution time series data (daily sampling for 2 months) under controlled operational settings, we performed an in-depth analysis of system performance as a function of the microbial community in the context of bioreactor physicochemical conditions. We obtained statistically evaluated results supporting the idea that monitoring microbial community dynamics could improve the ability to predict system functioning, beyond what could be explained by operational physicochemical variables. Moreover, our results suggested that considering the succession of multiple bacterial taxa would account for more system variation than focusing on any particular taxon, highlighting the need to integrate microbial community ecology for understanding system functioning.

Design, application, and microbiome of sulfate-reducing bioreactors for treatment of mining-influenced water

Sulfate-reducing bioreactors, also called biochemical reactors, represent a promising option for passive treatment of mining-influenced water (MIW) based on similar technology to aerobic/anaerobic-constructed wetlands and vertical-flow wetlands. MIW from each mine site has a variety of site-specific properties related to its treatment; therefore, design factors, including the organic substrates and inorganic materials packed into the bioreactor, must be tested and evaluated before installation of full-scale sulfate-reducing bioreactors. Several full-scale sulfate-reducing bioreactors operating at mine sites provide examples, but holistic understanding of the complex treatment processes occurring inside the bioreactors is lacking. With the recent introduction of high-throughput DNA sequencing technologies, microbial processes within bioreactors may be clarified based on the relationships between operational parameters and key microorganisms identified using high-resolution microbiome data. In this review, the test design procedures and precedents of full-scale bioreactor application for MIW treatment are briefly summarized, and recent knowledge on the sulfate-reducing microbial communities of field-based bioreactors from fine-scale monitoring is presented.Key points• Sulfate-reducing bioreactors are promising for treatment of mining-influenced water.• Various design factors should be tested for application of full-scale bioreactors.• Introduction of several full-scale passive bioreactor systems at mine sites.• Desulfosporosinus spp. can be one of the key bacteria within field-based bioreactors.

Unexpected diversity of acetate degraders in anaerobic membrane bioreactor treating organic solid waste revealed by high-sensitivity stable isotope probing

In anaerobic membrane bioreactor (AnMBR) treating organic solid waste, acetate is one of the most important precursors to CH₄. However, the identity and diversity of anaerobic acetate degraders are largely unknown, possibly due to their slow growth rates and low abundances. Here, we identified acetate-degrading microorganisms in the AnMBR sludges by high-sensitivity stable isotope probing. Degradation of the amended ¹³C-acetate coincided with production of ¹³CH₄ and ¹³CO₂ during the sludge incubation. High-throughput sequencing of RNA density fractions indicated that the aceticlastic and hydrogenotrophic methanogens, i.e., Methanosaeta sp. (acetate dissimilator) and Methanolinea sp. (acetate assimilator), incorporated ¹³C-acetate significantly. Remarkably, 22 bacterial species incorporating ¹³C-acetate were identified, whereas their majority was distantly related to the cultured representatives. Only two of them were the class Deltaproteobacteria-affiliated lineages with syntrophic volatile fatty acid oxidation activities. Phylogenetic tree analysis and population dynamics tracing revealed that novel species of the hydrolyzing and/or fermenting taxa, such as the phyla Bacteroidetes, Chloroflexi and Lentisphaerae, exhibited low relative abundances comparable to that of Methanolinea sp. (0.00011%) during the AnMBR operation, suggesting that these bacteria were involved in anaerobic acetate assimilation. Meanwhile, novel species of the phyla Firmicutes, Synergistetes and Caldiserica, the candidate phyla Aminicenantes and Atribacteria and the candidate division GOUTA4-related clade, as well as the known Deltaproteobacteria members, existed at relatively high abundances (0.00031%-0.31121%) in the reactor, suggesting that these bacterial species participated in anaerobic dissimilation of acetate, e.g., syntrophic acetate oxidation. The results of this study demonstrated the unexpected diversity and ecophysiological features of the anaerobic acetate degraders in the AnMBR treating organic solid waste.

Advances in heavy metal removal by sulfate-reducing bacteria

Industrial development has led to generation of large volumes of wastewater containing heavy metals, which need to be removed before the wastewater is released into the environment. Chemical and electrochemical methods are traditionally applied to treat this type of wastewater. These conventional methods have several shortcomings, such as secondary pollution and cost. Bioprocesses are gradually gaining popularity because of their high selectivities, low costs, and reduced environmental pollution. Removal of heavy metals by sulfate-reducing bacteria (SRB) is an economical and effective alternative to conventional methods. The limitations of and advances in SRB activity have not been comprehensively reviewed. In this paper, recent advances from laboratory studies in heavy metal removal by SRB were reported. Firstly, the mechanism of heavy metal removal by SRB is introduced. Then, the factors affecting microbial activity and metal removal efficiency are elucidated and discussed in detail. In addition, recent advances in selection of an electron donor, enhancement of SRB activity, and improvement of SRB tolerance to heavy metals are reviewed. Furthermore, key points for future studies of the SRB process are proposed.

Salinity and low temperature effects on the performance of column biochemical reactors for the treatment of acidic and neutral mine drainage

Passive biochemical reactors (PBRs) represent a promising option for the treatment of mine drainage. In this study, the influence of temperature (22 and 5 °C), salinity (0 and 20 g/L) and hydraulic retention time (HRT) on the efficiency of PBRs for the treatment of acidic and neutral mine drainage (AMD and NMD) was evaluated. To do so, eight 11 L PBRs were set-up and operated with vertically upward flow. Synthetic AMD and NMD, with two salinities (0 and 20 g/L), were tested at ambient temperature (22 ± 0.5 °C) during the first 3 months, then at low temperature (5 ± 1 °C), for 5 additional months. The HRT tested was 0.5 and 1 day, for NMD, and 2.5 and 5 days, for AMD. Results showed a consistent efficiency, above 65%, with higher HRTs (1 vs. 0.5 day for NMD and 5 vs. 2.5 for AMD). At room temperature, metals and sulfate removal was better for non-saline synthetic effluents (>99% vs 95% for Cu, 99% vs >74% for Ni, 90% vs 75% for Fe, and <99% vs <96% for SO₄^2-), after 3 months. At 5 °C, removal efficiency decreased especially for Ni, from 99% to 74%, for both mine drainage qualities. However, sulfate removal was found to be better in saline AMD (<40% vs <10%). The simultaneous effect of low temperature and high salinity further decreased PBR performance. Although higher HRTs entailed better removal efficiency, hydraulic problems such as decreases in permeability of the reactive mixture may still lead to inhibition of long-term PBR efficiency.

A composite taxonomical and functional framework of microbiomes under acid mine drainage bioremediation systems

Mining-industry is one of the most important activities in the economic development of many countries and produces highly significant alterations on the environment, mainly due to the release of a strong acidic metal-rich wastewater called acid mine drainage (AMD). Consequently, the establishment of multiple wastewater treatment strategies remains as a fundamental challenge in AMD research. Bioremediation, as a constantly-evolving multidisciplinary endeavor had been complemented during the last decades by novel tools of increasingly higher resolution such as those based on omics approaches, which are providing detailed insights into the ecology, evolution and mechanisms of microbial communities acting in bioremediation processes. This review specifically addresses, reanalyzes and reexamines in a composite comparative manner, the available sequence information and associated metadata available in public databases about AMD impacted microbial communities; summarizing our understanding of its composition and functions, and proposing potential genetic enhancements for improved bioremediation strategies. 16 S rRNA gene-targeted sequencing data from 9 studies previously published including AMD systems reported and studied around the world, were collected and reanalyzed to compare and identify the core and most abundant genera in four distinct AMD ecosystems: surface biofilm, water, impacted soils/sediments and bioreactor microbiomes. We determined that the microbial communities of bioreactors were the most diverse in bacterial types detected. The metabolic pathways predicted strongly suggest the key role of syntrophic communities with denitrification, methanogenesis, manganese, sulfate and iron reduction. The perspectives to explore the dynamics of engineering systems by high-throughput sequencing and biochemical techniques are discussed and foreseen application of synthetic biology and omics exploration on improved AMD biotransformation are proposed.

How to tackle the stringent sulfate removal requirements in mine water treatment-A review of potential methods

Sulfate (SO₄^2-) is a ubiquitous anion in natural waters. It is not considered toxic, but it may be detrimental to freshwater species at elevated concentrations. Mining activities are one significant source of anthropogenic sulfate into natural waters, mainly due to the exposure of sulfide mineral ores to weathering. There are several strategies for mitigating sulfate release, starting from preventing sulfate formation in the first place and ending at several end-of-pipe treatment options. Currently, the most widely used sulfate-removal process is precipitation as gypsum (CaSO₄·2H₂O). However, the lowest reachable concentration is theoretically 1500 mg L^-1 SO₄^2- due to gypsum's solubility. At the same time, several mines worldwide have significantly more stringent sulfate discharge limits. The purpose of this review is to examine the process options to reach low sulfate levels (< 1500 mg L^-1) in mine effluents. Examples of such processes include alternative chemical precipitation methods, membrane technology, biological treatment, ion exchange, and adsorption. In addition, aqueous chemistry and current effluent standards concerning sulfate together with concentrate treatment and sulfur recovery are discussed.

Effect of hydraulic retention time on microbial community in biochemical passive reactors during treatment of acid mine drainage

The effect of hydraulic retention time (HRT) on the microbial community during acid mine drainage (AMD) treatment was investigated. Physicochemical and molecular (illumina and qPCR) analyses were performed on reactive mixtures collected from seven bioreactors in three-operation period (8, 17 and 36weeks). Long HRT (4day) favored the relative abundance of SRB, causing the increase of residual sulfides and short HRT (1day) affected the anaerobic conditions of the bioreactors and favored the presence the acidophilic chemolithotrophic microorganisms. Besides qPCR indicated that genes related to cellulose degradation were present in low copy numbers and were affected by the HRT. Finally, environmental factors (pH, organic source, metal sulfides, and sulfate concentrations) had significant impact on relative abundance of the phylogenetic lineages, rather than the types of lineages present in the reactive mixture. The findings of this study indicate that HRT affects the stability of passive bioreactors and their microbial communities.